PRODUCT SHEET
SWEP B25T
The B25T delivers efficient heat exchange solutions across a wide
capacity interval. The product’s versatility and excellent heat transfer
make it excellent for demanding water-to-water applications and as a
high-performance condenser.
Basic specifications
Maximum number of plates (NoP) 140
Max flow 9 m³/h (39.63 gpm)
Channel volume 0.111/0.111 dm³ (0.0039/0.0039 ft³)
Material 316/316L stainless steel plates, copper brazing
Weight excl. connections 2.13+(0.1775*NoP) kg
4.69+(0.391*NoP) lb
Max Particle Size (mm) 1
Standard dimensions
# MM IN
A 526 20.71
B 119 4.69
C 479 18.86
D 72 2.83
F 4,00+2,25*(NoP) 0.16+0.09 *(NoP)
G 6 0.24
R 23 0.91
E_1 20 0.79
E_2 45 1.77
www.swep.net | Product No.100000294, B25TH/1P-SC-S | This PDF was generated 2025-03-31
Available connections
Threaded Connection Threaded Ultra High Solder Connection Connection Plate Combo Connection Hose Connection O-Ring Connection Weld Connection
Approved
*For specific dimensions, or information about other types of connections, please contact your SWEP sales representative.
PED Pressure / Temperature Product Concept
The Brazed Plate Heat Exchanger (BPHE) is constructed as a plate package of
corrugated channel plates with a filler material between each plate. During the
vacuum brazing process, the filler material forms a brazed joint at every contact
point between the plates, creating complex channels. The BPHE allows media
at different temperatures to come into close proximity, separated only by
channel plates that enable heat from one media to be transferred to the other
with very high efficiency. The concept is similar to other plate and frame
technology, but without the gaskets and frame parts.
3rd party Approvals
Most SWEP products are approved by below listed certification organizations:
Europe, Pressure Equipment Directive (PED) America, Underwriters Laboratories
Inc (UL) Japan, Kouatsu-Gas Hoan Kyoukai (KHK) Additionally SWEP holds
UL Pressure / Temperature approvals from a vast variety of other certification organizations. For more
details please contact your local SWEP representative. SWEP reserves the right
to make changes without prior notice.
Find product solution - SSP
With SWEP’s unique SSP, the SWEP Software Package, you can do advanced
heat transfer calculations yourself. It’s also easy to choose connections and
generate drawings of the complete product. If you would like advice, SWEP
offers all the service and support you need. Several SWEP accessories are also
available to fulfill additional needs.
Disclaimer
The information and recommendations in regards to the products are presented
in good faith, however, SWEP makes no representations or warranties as to the
completeness or accuracy of the information. Information is supplied upon the
condition that the purchasers will make their own determination as to the
products’ suitability for their purposes prior to use. Purchasers should note that
the properties of the products are both application and material selection
dependent and that products containing stainless steel are still object to
corrosion if used in unsuitable environments. Standard data is presented,
product variants with different data may exist. Contact your SWEP sales
representative for more details. SWEP may change any data without notice.
www.swep.net | Product No.100000294, B25TH/1P-SC-S | This PDF was generated 2025-03-31
