Scribd
Upload
223 views2 pages

Adalin NI

ADALIN NI is a nonionic softening agent based on polyethylene, designed to improve the handle, sewability, and wash effects of fabrics while reducing creasing. It is compatible with various substances and can be applied to all fiber types using padding machines. The product has a storage stability of at least 8 months and should not be stored below 0°C.

Uploaded by

eslam mohamed-34
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
223 views2 pages

Adalin NI

ADALIN NI is a nonionic softening agent based on polyethylene, designed to improve the handle, sewability, and wash effects of fabrics while reducing creasing. It is compatible with various substances and can be applied to all fiber types using padding machines. The product has a storage stability of at least 8 months and should not be stored below 0°C.

Uploaded by

eslam mohamed-34
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ADALIN® NI

Softening agent

ADALIN NI is a nonionic softener based on a polyethylene. ADALIN NI can be used as


friction reducing additive in resin application, in conventional finishing, or to aid in the
opening of ropes and warp ends before the re beaming process.

PRODUCT FEATURES

? gives a soft and smooth handle


? considerably improves the sewability
? improves the wash and wear effects
? reduces the tendency to creasing
? helps to retain abrasion resistance after resin finishing
? helps to retain tear strength after resin finishing
??does not reduce dye fastnesses in direct or reactive dying
??doesn’t cause chloride retention
??doesn’t have any affinity to the fiber, no concentration change occur in the bath
during pad application
??can be used with all cationic and anionic substances and also with all kinds of
catalysts used in wash&wear finish

COMPOSITION

Polyethylene dispersion

TYPICAL PROPERTIES

Ionic nature nonionic


Appearance whitish
Consistency liquid
pH-value 4,5 - 5,5
Compatibility Compatible with anionic, nonionic and cationic products, with
crosslinking agents and with catalysts usually applied in the
resin finish. Pre trials are recommended.
APPLICATION

Substrate fabrics of all fiber types, cellulosic yarns

Equipment padding machines, minimum application devices

Operation resin finish, conventional finish

Dissolving method soluble with cold water. For direct dosage purposes a pre-
dilution with water is recommended.

Quantities of application Padding process (Application is done usually by padding


process)

Adalin NI is especially used successfully for cotton and its


blends. Depending on the type of the fabric

20 - 40 g/l ADALIN NI is used

Temperature: Room temperature

Drying The usual drying temperatures are sufficient.

HANDLING AND STORAGE

Storage stability at least 8 months

Storage and transport Storage and transport NOT UNDER (°C) 0


Otherwise product is no longer usable

Change reversible by heating and stirring

Further remarks References to measures in case of accidents and fires as well


as further information about ecology, toxicology, transport and
storage are given in the separate Material Safety Data Sheet.

The indications given herein correspond to practical experiences. Owing to the differences in local conditions
they cannot claim to be complete, so that any liabilities - also with a view to claims of third parties - are
excluded.

You might also like