Sandvik DE810
multi-purpose drill
T e c h n i c a l s p e c i f i c at i o n Main specification - DE810
The DE810 is a highly capable multi-purpose drill rig with an Rotation head Top head drive, direct coupled to drill rods
efficient footprint. Its design makes it ideal for the contractor
Pull back 75 kN 16 800 lbf
requiring quick transport and setup. The DE810 has proven
Pull down 45 kN 10 000 lbf
itself for years in different kinds of applications and can be
Depth 954 m (N) 3129 ft (N)
found all around the world in mineral exploration, direction-
capacity* 170 m (4 1/2") 560 ft (4 1/2")
al drilling, coal bed methane (CBM) drilling and geotechnical
drilling. The DE810 handles RC and core drilling with equal Rod pull capacity 6m 20 ft
efficiency without leaving the hole, features an easily acces- Engine power at
130 kW 174 hp
sible design for service and maintenance work and standard 2200 rpm
safety features. * Depth calculation is based on feedback from field operatives and can be
reasonably expected with vertical, water filled holes, by a well-trained drilling
crew using high quality drilling tools. Sandvik cannot guarantee that these
results will be achieved in all drilling conditions.
MPDE810 TS 003ENG/2011
T E C H N I C A L S P E C I F I C AT I O N
Power pack Water pump
Diesel engine make Cummins QSB6.7 Tier 3 Water flow 140 l/min (37 US gpm) for core
drilling and RC water injection
HP rating 130 kW (174 hp)
Maximum pressure 7000 kPa (1000 psi)
RPM 2200 rpm
Emmissions rating Non emission
Rod clamps/slips
Air compressor Size range 44,5 mm to 177,8 mm jaws
(1 3/4” to 7”)
On board Sullair 1150/350 Slips table & RC accessories
900/500 optional
Mounting configurations
Traverse system
Truck mounted
Type Hydraulic cylinder over chains/
Crawler mounted
rope
Pullback 75 kN (16 800 lbf)
Weight
Pull down 45 kN (10 000 lbf)
Basic rig* 9600 kg (21 200 lb)
Head traverse 6,6 m (22 ft)
Air compressor 5500 kg (12 125 lb)
Traverse speed 41,9 m/min (137 ft/min) up and
Truck 9000 kg approximate
29 m/min (95 ft/min) down (19840 lb)
Crawler tracks 14 000 kg (30 863 lb)
Rotation head
*Approximately weight on bare drill on hydraulic jack-up tray
Type Top head drive, direct coupled
to drill rods
Rotation torque 5095 Nm (3755 ft/lbf) low gear
475 Nm (349 ft/lbf) at 1500 rpm Options
high gear DA554 Rod handler
Rotation speed 0-380 rpm low gear On board air compressor Sullair 1150/350
380-1500 rpm high gear
DA512 Safety spin
Hydraulic motor 107cc variable displacement
piston motor
Main winch
Pull capacity Dimensions
64,9 kN (14 600 lbf)
(single line ) 3,5 m
A
Winch speed 120 m/min (394 ft/min) (11'6")
maximum 9,2 m
B
(30'2")
Rope size 14 mm (3/5")
2,5 m
Width
(8'2") B
Wireline winch
Pull capacity 7,8 kN (1750 lbf)
Rope capacity 1000 m x 5 mm
A
(3280 ft x 3/16")
Maximum speed 243 m/min (797 ft/min)
Depth capacity* - Standard rods
RC 4 1/2" 170 m (558 ft)
P 432 m (1417 ft)
H 639 m (2096 ft)
N 954 m (3129 ft)
B 1220 m (4002 ft)
A N/A
*These calculations are based on feedback from field operatives and can be
reasonably expected with vertical, water filled holes, by a well-trained drill-
ing crew using high quality drilling tools. Sandvik cannot guarantee that
these results will be achieved in all drilling conditions.
Sandvik is a high-technology engineering group with
world-leading positions in selected areas – tools for metal
working, advanced materials technology, and mining and
construction. We are represented in 130 countries.
Sandvik Mining and Construction represents one third of
the overall Sandvik Group and serves a broad range of
customers in construction, mineral exploration, mining
and bulk materials handling. Our construction expertise
covers quarrying, tunneling, demolition and recycling, and
other civil engineering applications. Our mining products
and services support customers on the surface and under
ground, in all mineral, coal and metal mining applications
from exploration to ore transportation.
® SANDVIK is a registered trademark owned by Sandvik Companies in Sweden and other countries. © 2011 SANDVIK
Performance is based on ideal conditions. Sandvik reserves the right to amend specifications without notice
SANDVIK MINING AND CONSTRUCTION • www.sandvik.com
