Scribd
Upload
22 views1 page

Formolene 2575N: Impact Copolymer For High Speed Injection Molded Applications

Formolene® 2575N is a high melt flow, medium impact polypropylene copolymer suitable for high-speed injection molding in applications like packaging and consumer goods. It complies with FDA regulations for food contact and is free of animal-derived content. The document provides typical properties such as melt flow rate, density, tensile strength, and impact strength, indicating its suitability for various applications.

Uploaded by

calidadluisg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views1 page

Formolene 2575N: Impact Copolymer For High Speed Injection Molded Applications

Formolene® 2575N is a high melt flow, medium impact polypropylene copolymer suitable for high-speed injection molding in applications like packaging and consumer goods. It complies with FDA regulations for food contact and is free of animal-derived content. The document provides typical properties such as melt flow rate, density, tensile strength, and impact strength, indicating its suitability for various applications.

Uploaded by

calidadluisg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Formolene® 2575N

Impact Copolymer for High Speed injection Molded Applications

Formolene® 2575N is a very high melt flow, medium impact copolymer of polypropylene. It is designed
for such applications as packaging, housewares, and consumer goods requiring good impact strength
especially in cold temperatures. It is characterized by easy mold flow, excellent physical property balance
and finished product dimensional stability.

Formolene® 2575N meets the requirements of the U.S. Food and Drug Administration as specified in 21
CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food
contact. For additional information on approved conditions of use for food contact applications, please
refer to the “Products” section on our website (http://www.fpcusa.com/ourproducts.html).

This material is free of animal-derived content.

Typical Properties of this Commercial Grade


Typical Values
Property Test Method English SI
Melt Flow Rate, I2 @ 230°C ASTM D1238 75 g/10 min 75 g/10 min
Density ASTM D1505 0.9 g/cm3 0.9 g/cm3
Tensile Strength at Yield (50 mm/min) ASTM D638 3,130 psi 22 MPa
Elongation at Yield (50 mm/min) ASTM D638 5 % 5 %
Flexural Modulus (1.3 mm/min), 1%
ASTM D790 155,000 psi 1,069 MPa
Secant
Notched Izod Impact Strength @ 73°F ASTM D256A 2.5 ft-lb/in 133 J/m
Heat Deflection Temperature @66 psi ASTM D648 206 °F 97 °C
Note: Specimens were injection molded according to the conditions specified in ASTM D4101. Data for representative purposes
only; not to be construed as product specification. Published 12/13, revised 3/18

10/15

You might also like