DL210
LONGHOLE DRILL
TECHNICAL SPECIFICATION
Sandvik DL210 is a compact and flexible electro- KEY FEATURES
hydraulic longhole jumbo for production drilling in Hydraulic rock drill RDX5, (20 kW)
underground mines. Drilling module LHF2005
Boom BSL360
Designed for vertical and inclined plane rings and Drift size class (H x W) 2 700 x 2 700 mm
fans, Sandvik DL210 is capable of drilling 51 - 64 mm Control system IBCL + ECRL
millimeters diameter holes up to 20 meters. Turning in T-section 2 510 mm (LHF2005)
Tramming width 1 500 mm
The robust, stable and dedicated longhole drilling boom Tramming height 2 750 mm
has 1.5 meters parallel drilling coverage, and offers Tramming length 6 850 mm
accurate positioning and sturdy anchoring of the feed to Total weight 8 900 kg depending on options
ensure high quality drilling.
The compact jumbo layout is designed with a good ROCK TOOLS AND HOLE LENGTH
visibility and good stability. Rod and hole diameter Hole length (m) with ERCHC12
Rod Hole
Thread 3’ 4’ 5’
The operating environment and incorporated automatic Ø (mm) Ø (mm)
actions allow the operator to concentrate on safe, fast R32 32 51
12.1 16 20
and accurate drilling. R38 39 64
(20*) (20*) (20*)
A portable remote control ensures all the feed and rock T38 39 64
drill operations. *) Manual rod handling
All the service points are well-protected but easy to
access.
1. SANDVIK DL210 - LONGHOLE DRILL
HYDRAULIC ROCK DRILL DRILLING CONTROL SYSTEM
Type of rock drill RDX5 (TS2-433) Type of control system Umbilical remote control panel
Percussion power 20 kW Auto smooth collaring
Precise anti-jamming
Percussion pressure 160 bar Controls
Fast rock drill return and forward
Percussion rate 67 Hz movement
Rotation speed Max. 250 rpm (OMS125) Feed pressure control Rock tools weight compensation
Rotation torque Max. 625 Nm (OMS125) Umbilical (10 meters)
Remote controls
Shank adapter T38 (male) drilling control panel
Weight 210 kg
Filling device for accumulators Specification TS2-430 ELECTRIC SYSTEM
Standard voltages 380 - 690 V (±10%)
DRILLING MODULE Total installed power 60 kW
Type of drilling module LHF2005 (TS2-385) Main switch gear QM14
Drilling module force Max. 20 kN IP classification Specification TS2-132
Rod retainer FCC2 for one feed Starting method Star delta starter 380 - 575 V
DOL 600 - 690 V
600 mm (front) with LHF2004 / 2005
Front and rear stingers 350 mm (front) with LHF2003 CRQ with six turn indicator light and
1 200 mm (rear) Automatic cable reel
three turn interlock system
2 x feed tilt angle and Cable reel control At the operator station
Visual angle indicators
side angle Low oil level indicator Low level oil switch
On the electric cabinet and at right
Emergency stop
DRILLING MODULE DIMENSIONS side machine
Drilling LHF2003 LHF2004 LHF2005 Front lights
4 x 50 W LED (4 200 lm, 6 000 K)
module Option Option Standard (combined working and driving)
Total length 2 550 mm 2 920 mm 3 225 mm Rear tramming light 1 x 50 W LED (4 200 lm, 6 000 K)
Extension rod 915 mm 1 220 mm 1 525 mm Parking rear brake / park lights 1 x red LED
Min. operating Portable working light 1 x 150 W (24V)
2 650 mm 3 020 mm 3 325 mm
dimensions Laser positioning light 2 pcs, at each side of the machine
Net weight 695 kg 710 kg 725 kg Sealed AGM batteries 2 x 12 V, 90 Ah
LONGHOLE BOOM AIR AND WATER SYSTEM
Type of boom BSL360 (TS2-254) Flushing of holes By water
Parallelism Automatic hydraulic Water booster pump WBP1 (4 kW)
Feed extension 1 200 mm 33 l/min at 15 bar
Water pump capacity
Boom weight, net 800 kg (input pressure = 4 bar)
Roll-over angle 360º Water pump inlet pressure 2 bar (Min.)
Flushing water pressure 10 - 15 bar
HYDRAULIC SYSTEM Shank lubrication device SLU1 (air / oil mist)
Powerpack HPP 545 (1 x 45 kW) Air compressor 1 m³/min at 7 bar
Filtration (pressure / return) 10 µ / 10 µ Air cleaner for external air IP5 with air mine connection
Oil tank volume 165 liters End of hole air flushing 1 x 60 liters air receiver
Oil cooler (water actuated) 1 x OW25 (25 kW), harsh water Rock drill oil consumption 180 - 250 g/h
Rock drill air consumption 250 - 350 l/min
OPERATOR’S SAFETY CANOPY
Canopy certification FOPS (ISO 3449)
Unit height in tramming 2 750 mm
Operation Standing drilling, seated tramming
Ergonomic, adjustable for
Operator’s seat
tramming including seat belt
Sound pressure level Operator station: 102 dB(A)
according to EN 16228 Emitted: 124 dB(A)
2. SANDVIK DL210 - LONGHOLE DRILL
CARRIER OPTIONAL ITEMS
Type of carrier TCQ (frame steered) Rock drill
Carrier articulation ± 27º Power extractor For RDX5 rock drill
Rear axle oscillation ± 6º Drilling module
Ground clearance 210 mm *Feed length LHF2003, LHF2004 (TS2-385)
Drilling module wear parts Kit for alternative rock tools
Deutz D914L04, 55 kW
Diesel engine Rod handling system ERHC12
(Tier 4i, Stage IIIA, MSHA)
Storing capacity (R32 / T38 / T45)
Exhaust catalyzer Standard 13 / 12 / 11 rods
Transmission Hydrostatic Rubber front protection For LHF feed
Wheel motor 4 x radial piston Hydraulic system
Tires, rim 300 x 15, 8.00 - 15 Filling pump for hydraulic oil Electric
Service brakes Hydrostatic transmission Cooler for hydraulic oil OA25 oil-to-air (25 kW)
Parking and SAHR type, fail safe wet disc brakes Drilling control system
emergency brakes ABA brakes Instrumentation TIS DP, with data collector (TS2-359)
Access detector Mandatory in Europe (TS2-211)
6.5 km/h (Horizontal)
Tramming speed
4 km/h (14%=1:7=8°) Cleaning system
Gradeability / sideways tilt Max. 15° / 5° (according to EN 16228-2) HP system without reel Up to 180 bar (TS2-343)
Fuel tank 75 liters Greasing systems
2 x Vertical inclined (front) Manual system Greasing gun and cartridge with
Carrier stabilization hose reel (TS2-463)
2 x Vertical (rear)
Brake release Manual hand pump Electric system
*Optional voltage 1 000 V (50 or 60 Hz) with DOL
Centralized greasing points Specification (TS2-463)
(machine height mini 2 470 mm)
Tramming alarm Standard Dual voltage kit 380 - 660 V at 50 Hz
Connectivity solution (TS2-535) *Electric cables Specification TS2-121
Knowledge Box™
My Sandvik insight readiness (TS2-390) Ground fault and overcurrent VYK
protection
Colour scheme Sandvik Battery jump start
1 x Operator’s manual Amber flashing light LED (24 V)
1 x Technical manual (in English only)
Documentation 1 x Parts manual (in English only) Air and water system
2 x USB key of manuals (PDF files) Air mist flushing External air / external water
1 x Online Parts manuals (My Sandvik) Water hose with hooks Ø32 mm (1 ¼”), 80 meters
Operator’s safety canopy
Safety grill Front grill or all around the canopy
Fire suppression system
Hand held fire extinguisher 1 x 6 kg Type ABC
Manual system Ansul, 6 nozzles (TS2-460)
Auto. fire suppression system Sandvik Eclipse™ (TS2-461)
Carrier
*Diesel engine Deutz D914L04, 52 kW, Tier 3,
Stage IIIA, CANMET
Deutz BF4L914, EMR, 72 kW, Tier 2
(for high altitude)
*Foam filled tires 4 pcs
Speedometer Tramming speed display
Wheel chocks and holders 2 Sets
My Sandvik productivity Remote monitoring system
Extra Item
Berg plug / Berg socket
Kit for disassembly Identification hoses
Spare rock drill RDX5
Tools and pressure test box Specification TS2-429
Spare wheel assembly Standard or foam filled tire
Special tools for rock drill Field tool set (TS2-434)
Complete tool set (TS2-435)
Documentation Extra paper, PDF manuals
Warranty extension One year additional (excl. kazakhstan)
Package: Country specific USC, CIS
options
*Package: Arctic In extremely low temperature
(Specification TS2-284)
*Package: Harsh water Advanced (Specification TS2-049)
*) Replaces standard feature
3. SANDVIK DL210 - LONGHOLE DRILL
Up to 5 600
Minimum distance // holes
to the wall 1 500
A
A (Maxi)
(mini)
TS2-151:14/ENG/METRIC © Sandvik Mining and Rock Solutions 2022 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
W Wp
SECTIONS HEIGHT
MINIMUM DISTANCE TO THE WALL Feed Rod A (mini) A (maxi)
W Wp LHF2003 915 mm 2 700 mm 3 700 mm
LHF2000 610 mm 300 mm LHF2004 1 220 mm 3 000 mm 4 000 mm
LHF2000 + ERHC12 610 mm 850 mm LHF2005 1 525 mm 3 300 mm 4 300 mm
1 770 900
A
SANDVIK
(mini)
2 750 DL 210
1 900 2 150
1 515
210
1 200 1 910 1 195 1 000
1 400 4 775
1 500 6 490
6 850
R C
750 750 Radius T-cross
(R) (C)
750 3 880 DL210 (LHF2003 + ERHC12) mm 5 460 2 380
DL210 (LHF2004 + ERHC12) mm 5 515 2 450
1 730 750 DL210 (LHF2005 + ERHC12) mm 5 578 2 510
1 470 27°
All dimensions in mm
Drawings shown DD210 with ERHC12 option
450
Sandvik Mining and Rock Solutions reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.
ROCKTECHNOLOGY.SANDVIK
4. SANDVIK DL210 - LONGHOLE DRILL
