Scribd
Upload
16 views2 pages

4 Cast

The UE 4Cast Bearing Condition Monitoring System allows for continuous monitoring of bearing conditions, enabling users to receive reports at customizable intervals. The system logs data and sounds, sending them to the Ultratrend DMS for analysis when alarm levels are reached. It is designed for flexibility, allowing users to set sampling and reporting frequencies according to their needs.

Uploaded by

AME Leonard
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views2 pages

4 Cast

The UE 4Cast Bearing Condition Monitoring System allows for continuous monitoring of bearing conditions, enabling users to receive reports at customizable intervals. The system logs data and sounds, sending them to the Ultratrend DMS for analysis when alarm levels are reached. It is designed for flexibility, allowing users to set sampling and reporting frequencies according to their needs.

Uploaded by

AME Leonard
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

We’ve got you

covered!

UE 4Cast
Bearing Condition Monitoring System
Save time, save your bearings and improve plant reliability

Review bearing information from the


convenience of your office

Monitor bearing condition 24/7 and tell 4Cast when


to send a report.

This unique, system continuously logs bearing data


and bearing sounds. At pre-set intervals, all stored
data and sound samples are sent to a computer for
reporting and analysis.

How often do you want 4Cast to sample a


bearing? System flexibility allows users to pre-set
how often a bearing will be tested: by the minute,
hour, day, etc.

Customize your report intervals

Data and sound recording transfer rates are


customizable so that while the data are routinely
recorded on the 4Cast box, a report containing
only the latest information will be sent to Ultratrend
DMS (UE Systems data management analysis
and reporting program) via your existing Ethernet
network. Reporting frequency can be set by the
user (for example, once a week, month or year).

UE SPECTRALYZER™ - Spectral Analysis Software (Time Series tab screenshot) ULTRATREND DMS™ - Data Management Program (Chart screenshot)
Set your alarm levels

Alarm levels can be set to provide a low


alarm and a high alarm.

Analyze how and why


the alarm went off
Specifications
Case Stainless Steel; Dimensions: 9”x6”x3” (22.8cm x 15.24cm x
1. When a set alarm level is reached or 7.62cm) Weight: 4.7 lbs. (2.1 kg)
exceeded, the system will send previously Power input 24V, 1 amp (conditioned)
logged data and recorded sounds directly Circuitry Solid State Analog and SMD Digital with temperature
to Ultratrend DMS for review. compensation and true RMS conversion
Frequency
20kHz-100 kHz Centered around 30 kHz
Response
2. After an alarm has been addressed, all Response time <10ms
data and sound recordings stored during Operating
32°F - 122°F / 0°C - 50°C
the alarm period can be set to transfer to Temperature
the computer for more detailed analysis Transducer RAS piezoelectric, stainless steel housing
and reporting. Cable BNC out to BNC in (length: 25’ / 7.62 m, can be ordered up to
100 feet / 30,48 m)
Transducer
Each 4Cast box monitors up to four thread: female10/32
Mount
bearings. Software Ultratrend DMS 6.0 or higher

UE 4Cast opened box circuits

www.uesystems.com
UE Systems Inc. • 14 Hayes St. • Elmsford, New York • USA 10523
T: +1 914 592 1220 • E: info@uesystems.com • www.uesystems.com

©UE Systems, Inc. Made in U.S.A.

You might also like