GR 750 XL
GR 750 XL
DIMENSIONS
GENERAL DIMENSIONS
(29.5 - 25 Tires)
Feet Meters
Turning radius
4 wheel steer 22' 4" 6.8
2 wheel steer 39' 1" 11.9
Tail swing of counterweight 13' 9" 4.19
JIB - Two stage bi-fold lattice type with 3.5 o, 25 o or 45 o offset (tilt type). CONTROL VALVES - Multiple valves actuated by pilot pressure
Single sheave, 15-5/8" (0.396m) root diameter, at the head of both with integral pressure relief valves.
jib sections. Stored alongside base boom section. Jib length is
33.2' (10.1m) or 58.1' (17.7m). Assistant cylinders for mounting RESERVOIR - 202 gallon (763 lit.) capacity. External sight level
and stowing, controlled at right side of superstructure. gauge.
Self stowing jib mounting pins.
FILTRATION - BETA10=10 return filter, full flow with bypass
AUXILIARY LIFTING SHEAVE (SINGLE TOP) protection, located inside of hydraulic reservoir. Accessible for
Single sheave, 15-5/8" (0.396m) root diameter. Mounted to main easy replacement.
boom head for single line work (storable).
OIL COOLER - Air cooled fan type.
ANTI-TWO BLOCK - Pendant type over-winding cut out device
with audio-visual (FAILURE lamp/BUZZER) warning system.
CAB AND CONTROLS
SLEWING
Hydraulic axial piston motor through planetary slewing speed Both crane and drive operations can be performed from one cab
reducer. Continuous 360 o full circle slewing on ball bearing turn mounted on rotating superstructure.
table at 2.4min -1 {rpm}. Equipped with manually locked/released
slewing brake. A 360 o positive slewing lock for pick and carry and travel Left side, 1 man type, steel construction with sliding door access
modes, manually engaged in cab. Twin slewing system: Free slewing and safety glass windows opening at side. Door window is
or lock slewing controlled by selector switch on front console. powered control. Windshield glass window and roof glass window
are shatter-resistant. Tilt-telescoping steering wheel. Adjustable
HOIST control lever stands for slewing, boom elevating, boom telescoping,
auxiliary hoist and main hoist. Control lever stands can change
MAIN HOIST - Variable speed type with grooved drum driven by neutral positions and tilt for easy access to cab. 3 way adjustable
hydraulic axial piston motor through speed reducer. Power load operator's seat with high back, headrest and armrest. Engine
lowering and raising. Equipped with automatic brake (neutral brake) throttle knob. Foot operated controls: boom elevating,
and counterbalance valve. Controlled independently of auxiliary hoist. boom telescoping, service brake and engine throttle.
Equipped with cable follower and drum rotation indicator. Hot water cab heater and air conditioning.
DRUM - Grooved 14-1/4" (0.362m) root diameter x 23-5/8" (0.6m) Dash-mounted engine start/stop, monitor lamps, cigarette lighter,
wide. Wire rope: 771' of 3/4" diameter rope (235m of 19mm). drive selector switch, parking brake switch, steering mode
Drum capacity: 997' (304m) 7 layers. select switch, power window switch, pump engaged/disengaged
Maximum single line pull (available): 16,500 lbs (7,480kg). switch, slewing brake switch, telescoping/auxiliary hoist select
Maximum line speed: 479FPM (146m/min) at the 6th layer. switch, outrigger controls, free slewing / lock slewing selector switch,
eco mode switch and ashtray.
AUXILIARY HOIST - Variable speed type with grooved drum driven
by hydraulic axial piston motor through speed reducer. Power load
lowering and raising. Equipped with automatic brake (neutral brake) Instruments - Torque converter oil temperature, engine water
and counterbalance valve. Controlled independently of main hoist. temperature, air pressure, fuel, speedometer, tachometer,
Equipped with cable follower and drum rotation indicator. hour meter and odometer / tripmeter. Hydraulic oil pressure is
monitored and displayed on the AML-C display panel.
DRUM - Grooved 14-1/4" (0.362m) root diameter x 23-5/8" (0.6m)
wide. Wire rope: 436' of 3/4" diameter rope (133m of 19mm).
Drum capacity: 997' (304m) 7 layers.
Maximum single line pull (available): 16,500 lbs (7,480kg).
Maximum line speed: 420FPM (128m/min) at the 4th layer.
2
Tadano electronic LOAD MOMENT INDICATOR system TADANO AML-C monitors outrigger extended length and
(AML-C) including: automatically programs the corresponding "RATED LIFTING
Control lever lockout function CAPACITIES" table
Boom position indicator
Outrigger state indicator Operator's right hand console includes transmission gear
Boom angle / boom length / jib offset angle / jib length / load selector, and slewing lock lever and sight level bubble.
radius / rated lifting capacities / actual loads read out Upper console includes working light switch, roof washer
Ratio of actual load moment to rated load moment and wiper switch, emergency outrigger set up key switch,
indication jib equipped/removed select switch, eco mode switch
Automatic Speed Reduction and Slow Stop function and air conditioning control switch.
on boom elevation and slewing
Working condition register switch NOTE: Each crane motion speed is based on unloaded
Load radius / boom angle / tip height / slewing range conditions.
preset function
External warning lamp
Tare function
Fuel consumption monitor
Main hoist / auxiliary hoist select
Drum rotation indicator (audible and visible type) main and
auxiliary hoist
CARRIER SPECIFICATIONS
TYPE - Rear engine, left hand steering, driving axle 2-way SUSPENSION - Front: Rigid mounted to frame.
selected type by manual switch, 4x2 front drive, 4x4 front and Rear: Pivot mounted with hydraulic lockout device.
rear drive.
FRAME - High tensile steel, all welded mono-box construction. BRAKE SYSTEMS - Service: Air over hydraulic disc brakes on
all 4 wheels. Parking/Emergency: Spring applied-air released
TRANSMISSION - Electronically controlled full automatic brake acting on input shaft of front axle. Auxiliary: Electro-
transmission. Torque converter driving full powershift with pneumatic operated exhaust brake.
driving axle selector. 6 forward and 2 reverse speeds, constant
mesh. TIRES - 29.5-25 22PR(OR) or 29.5-25 28PR(OR)
3 speeds - high range - 2 wheel drive; 4 wheel drive
3 speeds - low range - 4 wheel drive OUTRIGGERS - Four hydraulic, beam and jack outriggers.
Vertical jack cylinders equipped with integral holding valve. Each
TRAVEL SPEED - 22 mph (36 km/h) outrigger beam and jack is controlled independently from cab.
Beams extend to 23' 11-3/8" (7.3 m) center-line and retract to
GRADEABILITY (tan ) - 147% (at stall), **57% within 10' 10-1/2" (3.315 m) overall width with floats. Outrigger
** Machine should be operated within the limit of engine design. jack floats are attached thus eliminating the need of manually
** (30°: Cummins QSB6.7) attaching and detaching them. Controls and sight bubble located
in superstructure cab. Four outrigger extension lengths are
AXLE - Front: Full floating type, steering and driving axle with provided with corresponding "RATED LIFTING CAPACITIES" for
planetary reduction. Rear: Full floating type, steering and driving crane duty in confined areas.
axle with planetary reduction and non-spin rear differential. Min. Extension 8' 10-1/4" (2.7m) center to center
Mid. Extension 18' 1/2" (5.5m) center to center
STEERING- Hydraulic power steering controlled by steering Mid. Extension 21' 11-3/4" (6.7m) center to center
wheel. Four steering modes available: 2 wheel front, 2 wheel Max. Extension 23' 11-3/8" (7.3m) center to center
rear, 4 wheel coordinated and 4 wheel crab . Float size(Diameter) 1' 11- 5/8" (0.6m)
ENGINE
Model Cummins QSB6.7 [Tier 4] Radiator Fin and tube core, thermostat controlled
Type Direct injection diesel Fan, in.(mm) Suction type, 9-blade, 28 (711) dia.
No. of cylinders 6 Starting 24 volt
Combustion 4 cycle, turbo charged and after cooled Charging 24 volt system, negative ground
BoreXStroke, in.(mm) 4.212 x 4.882 (107 x 124) Battery 2-120 amp. Hour
Displacement, cu. in (liters) 409 (6.700) Compressor, air, CFM(l /min) 17.0 CFM (481) at 2,400rpm
Air inlet heater 24 volt preheat Horsepower (kW) Gross 270 (201) at 2,000rpm
Air cleaner Dry type, replaceable element Torque, Max. ft-lb (Nm) 730 (990) at 1,500rpm
Oil filter Full flow with replaceable element Capacity, gal.(liters)
Fuel filter Full flow with replaceable element Cooling water 7.4 (28)
Fuel tank, gal.(liters) 79.2 (300), right side of carrier Lubrication 4.0 (15)
Cooling Liquid pressurized, recirculating by-pass Fuel 79.2 (300)
DEF 10.0 (38)
3
STANDARD EQUIPMENT
- Five section full power partially synchronized boom - Independently controlled outriggers
36.1'~141.1' (11.0 m~43.0 m) - Four outrigger extension positions
- 33.2' or 58.1' (10.1 m or 17.7 m) bi-fold lattice jib (tilt type) - Self-storing outrigger pads
with 3.5 o, 25 o or 45 o pinned offsets and self storing pins. - Cummins QSB6.7 turbo charged
- Auxiliary lifting sheave (single top) storable after cooled engine (270HP) with exhaust brake
- Variable speed main hoist with grooved drum, cable follower - Electronic controlled automatic transmission driven
and 771' of 3/4" cable. by torque converter
- Variable speed auxiliary hoist with grooved drum, cable follower - 4 X 4 X 4 drive/steer
and 436' of 3/4" cable. - Non-spin rear differential
- Drum rotation indicator (audible, visible and thumper type) main - Automatic rear axle oscillation lockout system
and auxiliary hoist - 29.5-25 22PR(OR) tires or 29.5-25 28PR(OR) tires
- Anti-Two block device (overwind cutout) - Disc brakes
- Boom angle indicator - Fenders
- Tadano electronic load moment indicator system (AML-C) - Air dryer
- Outrigger extension length detector - Water separator with filter(high filtration)
- Electronic crane monitoring system - Engine over-run alarm
- Tadano twin slewing system and 360o positive slewing lock - Back-up alarm
- Self centering finger control levers with pilot control - Low oil pressure/high water temp. warning device (visual)
- Control pedals for boom elevating and boom telescoping - Rear steer centering light
- 3 way adjustable cloth seat with armrests, high back - Air cleaner dust indicator
and seat belt - Full instrumentation package
- Tilt-telescoping steering wheel - Complete highway light package
- Tinted safety glass and sun visor - Tool storage compartment
- Front windshield wiper and washer - Tire inflation kit
- Roof window wiper and washer - 24 volt electric system
- Power window (cab door ) - 6.2 ton (5.6 metric ton) hook ball with swivel
- Rear view mirrors (right and left side) - 75 ton (68 metric ton) - 7 sheaves with swivel hook block
- Mirror for main and auxiliary hoists and safety latch for 3/4"(19mm) wire rope
- Cigarette lighter and ashtray - Towing hooks-Front and rear
- Cab floor mat - Lifting eyes
- Pump disconnect in operator's cab - Hook block tie down (front bumper)
- Hydraulic oil cooler - Weighted hook storage compartment
- Hot water cab heater and air conditioner - Halogen head lamp
- Positive control - Telematics (machine data logging and monitoring system)
- Quick reeving type bi-fold jib with HELLO-NET via internet
- Work lights - Fuel consumption monitor
- Eco mode system
HOISTING PERFORMANCE
LINE SPEEDS AND PULLS DRUM WIRE ROPE CAPACITIES
Main or auxiliary hoist - 14-1/4" (0.362m) drum Main and auxiliary drum grooved lagging
Wire
Line pulls 3/4" (19mm) wire rope
Layer Line speeds1 rope
Available2 layer
Rope per layer Total wire rope
F.P.M. m/min Lbs. kgf Feet Meters Feet Meters
1st 331 101 16,500 7,480 1 112.2 34.2 112.2 34.2
2nd 361 110 15,200 6,900 2 122.3 37.3 234.5 71.5
3rd 390 119 13,800 6,260 3 132.2 40.3 366.8 111.8
4th 420 128 12,700 5,760 4 142.3 43.4 509.1 155.2
5th 450 137 11,900 5,400 5 152.2 46.4 661.4 201.6
6th 479 146 11,000 4,990 6 162.4 49.5 823.8 251.1
7th3 509 155 10,300 4,670 7 172.5 52.6 996.4 303.7
* Maximum permissible line pull may be affected by wire rope strength.
Maximum lifting capacity per line (Main & Aux.): 12,300 lbs (5,600 kg)
1
Line speeds based only on hook block, not loaded. DRUM DIMENSIONS
2
Developed by machinery with each layer of wire rope, but not based Inch mm
on rope strength or other limitation in machinery or equipment. Root diameter 14-1/4" 362
3
Seventh layer of wire rope are not recommended Length 23-5/8" 600
for hoisting operations. Flange diameter 25-7/8" 657
4
GR-750XL WORKING RANGE CHART
5
GR-750XL WORKING RANGE CHART
6
GR-750XL RATED LIFTING CAPACITIES (IN POUNDS)
ON OUTRIGGERS FULLY EXTENDED 23' 11-3/8"(7.3m) SPREAD
o
360 ROTATION
A 36.1' 49.2' 62.3' (19m) 75.5' (23m) 88.6' (27m) 101.7' (31m) 114.8' (35m) 128.0' 141.1'
B C (11m) C (15m) C C C C C C C C C C C (39m) C (43m)
8' 72 150,000 77 90,000
10' 68 132,300 75 90,000 79 70,500 78 44,100
12' 64 117,100 72 90,000 77 70,500 76 44,100 79 44,100 79 44,100
15' 59 98,000 68 90,000 73 70,500 73 44,100 77 44,100 77 44,100 79 44,100 79 37,500
20' 48 75,600 62 75,100 69 69,600 69 44,100 73 44,100 73 44,100 76 42,400 76 37,100 78 36,600 78 31,700
25' 33 60,000 54 59,400 64 59,100 63 44,100 69 44,100 69 43,300 73 39,100 73 32,600 76 32,400 76 28,100 78 28,500 78 24,600 79 22,000
30' 46 45,900 59 45,000 58 44,100 65 44,100 65 37,200 70 38,800 69 29,500 73 31,500 73 25,200 75 26,300 75 22,200 77 22,000 79 19,800
35' 36 33,900 52 32,900 52 38,300 60 34,600 60 32,400 66 34,700 66 25,900 70 30,600 70 23,500 73 25,600 73 20,100 75 20,300 77 18,500
40' 21 26,100 45 25,300 45 30,200 55 26,800 55 28,500 62 27,700 62 23,100 67 27,700 67 20,900 70 24,900 70 18,700 73 18,700 75 17,200
45' 38 19,900 38 24,600 50 21,300 50 24,800 58 22,200 58 20,900 63 22,800 63 18,800 68 22,700 67 17,400 70 17,700 74 16,900
50' 29 15,900 28 20,500 45 17,300 45 20,700 54 18,100 54 19,000 60 18,700 60 17,100 65 19,100 64 15,600 68 17,100 71 16,500
55' 13 11,100 11 14,000 38 14,200 38 17,500 49 15,000 49 17,400 56 15,500 56 15,500 62 16,000 62 14,000 66 15,600 69 16,100
60' 31 11,700 31 15,000 45 12,500 45 15,200 53 13,100 53 14,000 58 13,400 58 12,700 63 14,200 67 13,900
65' 22 9,700 22 13,000 40 10,500 40 13,200 49 11,000 49 12,800 55 11,400 55 11,600 60 12,500 65 11,900
70' 34 8,900 34 11,500 45 9,400 45 11,600 52 9,800 52 10,600 57 10,900 62 10,300
75' 26 7,500 26 10,100 40 8,000 40 10,300 48 8,400 48 9,700 54 9,500 59 8,800
80' 15 6,300 18 9,000 35 6,800 35 9,100 44 7,200 45 9,000 51 8,300 57 7,700
85' 29 5,800 29 8,000 40 6,200 41 8,100 48 7,200 54 6,600
90' 21 5,000 21 7,200 36 5,300 36 7,200 45 6,300 51 5,700
95' 31 4,500 31 6,400 41 5,600 48 4,900
100' 25 3,900 25 5,800 37 4,900 45 4,300
105' 16 3,300 16 5,200 33 4,300 42 3,700
110' 27 3,800 38 3,100
115' 21 3,300 34 2,600
120' 8 2,900 30 2,200
125' 24 1,800
130' 17 1,500
D 0
Telescoping conditions (%)
Tele.
I, II I I II I II I II I II I II II I, II
mode
2nd boom 0 50 100 0 100 0 100 0 100 0 100 0 50 100
3rd boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
4th boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
Top boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
NOTE: The lifting capacity data stored in the LOAD MOMENT INDICATOR (AML-C) is based on the standard
number of parts of line listed in the chart.
Standard number of parts of line for each boom length should be according to the following table.
Boom length in feet 36.1' 36.1' to 49.2' 49.2' to 62.3' 62.3' to 141.1' Single top
(meters) (11m) (11m to 15m) (15m to 19m) (19m to 43m) Jib
Telescoping mode I, II I I II I, II I, II
7
GR-750XL RATED LIFTING CAPACITIES (IN POUNDS)
ON OUTRIGGERS FULLY EXTENDED 23' 11-3/8"(7.3m) SPREAD
360o ROTATION
141.1' (43.0m) Boom + 33.2' (10.1m) Jib 141.1' (43.0m) Boom + 58.1' (17.7m) Jib
o
C 3.5 offset 25o offset 45o offset C 3.5o offset 25o offset 45o offset
R W R W R W R W R W R W
80 35.1' 9,300 48.6' 8,800 55.4' 7,500 80 43.0' 5,700 65.6' 5,200 76.8' 3,900
79 38.7' 9,300 51.8' 8,500 58.4' 7,300 79 47.2' 5,700 69.2' 5,000 80.1' 3,800
78 42.0' 9,300 54.8' 8,200 61.0' 7,100 78 51.2' 5,700 72.5' 4,900 83.3' 3,700
77 45.3' 9,300 58.1' 8,000 64.3' 6,900 77 55.1' 5,700 75.8' 4,700 86.0' 3,700
76 48.9' 9,300 61.0' 7,800 66.9' 6,700 76 58.7' 5,700 79.1' 4,600 89.2' 3,600
75 52.5' 9,300 64.0' 7,500 69.9' 6,600 75 62.7' 5,700 82.3' 4,400 92.2' 3,500
73 59.1' 9,100 69.9' 7,200 75.1' 6,300 73 70.2' 5,700 88.9' 4,100 97.8' 3,400
70 67.9' 8,200 78.4' 6,700 83.3' 5,900 70 81.4' 5,600 98.8' 3,800 106.0' 3,200
68 73.8' 7,800 84.0' 6,400 87.6' 5,700 68 87.9' 5,300 105.0' 3,600 111.2' 3,000
65 83.7' 7,200 91.9' 6,000 95.1' 5,400 65 97.1' 4,700 113.2' 3,300 118.8' 2,900
63 87.3' 6,700 96.8' 5,800 99.7' 5,200 63 103.0' 4,400 118.8' 3,200 123.7' 2,800
60 94.5' 5,800 103.7' 5,200 106.3' 4,900 60 111.9' 3,900 127.0' 3,000 130.9' 2,600
58 99.4' 5,100 107.9' 4,600 110.6' 4,300 58 116.8' 3,500 131.9' 2,800 135.2' 2,600
55 106.3' 4,100 114.2' 3,800 116.1' 3,500 55 124.3' 2,800 138.5' 2,300 141.1' 2,100
53 110.6' 3,600 118.1' 3,300 119.8' 3,100 53 129.3' 2,300 142.7' 1,900 144.7' 1,700
50 116.8' 2,900 124.0' 2,700 125.0' 2,600 50 136.2' 1,800 148.6' 1,400 149.9' 1,300
48 120.7' 2,500 127.6' 2,300 128.3' 2,200 48 140.7' 1,400 152.6' 1,200 153.2' 1,100
45 126.6' 2,000 132.5' 1,900 133.2' 1,800 45 147.3' 1,000
43 130.2' 1,700 135.8' 1,600
40 135.5' 1,300 140.7' 1,200
38 139.1' 1,100 143.7' 1,000
8
GR-750XL RATED LIFTING CAPACITIES (IN POUNDS)
ON OUTRIGGERS MID EXTENDED 21' 11-3/4"(6.7m) SPREAD
o
360 ROTATION
A 36.1' 49.2' 62.3' (19m) 75.5' (23m) 88.6' (27m) 101.7' (31m) 114.8' (35m) 128.0' 141.1'
B C (11m) C (15m) C C C C C C C C C C C (39m) C (43m)
8' 72 150,000 77 90,000
10' 68 130,000 75 90,000 79 70,500 78 44,100
12' 64 113,600 72 90,000 77 70,500 76 44,100 79 44,100 79 44,100
15' 58 94,800 68 90,000 73 70,500 73 44,100 77 44,100 77 44,100 79 44,100 79 37,500
20' 48 72,700 62 72,200 69 69,600 69 44,100 73 44,100 73 44,100 76 42,400 76 37,100 78 36,600 78 31,700
25' 33 54,300 55 52,700 64 51,700 63 44,100 69 44,100 69 43,300 73 39,100 73 32,600 76 32,400 76 28,100 78 28,500 78 24,600 79 22,000
30' 47 36,200 58 35,300 58 40,900 65 37,100 65 37,200 70 38,100 69 29,500 73 30,600 73 25,200 75 26,300 75 22,200 77 22,000 79 19,800
35' 36 26,500 52 25,700 52 30,800 60 27,300 60 31,300 66 28,200 66 25,900 70 28,900 70 23,500 73 24,600 73 20,100 75 20,300 77 18,500
40' 22 20,100 45 19,500 45 24,300 55 20,900 55 24,800 62 21,800 62 23,100 67 22,500 66 20,900 70 23,000 70 18,700 73 18,700 75 17,200
45' 38 15,000 37 19,600 50 16,400 50 20,100 58 17,300 58 20,400 63 17,900 63 18,800 67 18,300 67 17,400 71 17,500 73 16,400
50' 28 11,700 27 16,100 45 13,100 45 16,600 54 13,900 54 16,900 60 14,500 60 17,100 64 14,900 64 15,600 68 16,300 71 15,500
55' 11 9,100 10 13,400 38 10,500 38 14,000 49 11,400 49 14,300 56 11,900 56 14,400 61 12,300 62 14,000 65 13,600 69 12,900
60' 31 8,400 31 11,800 45 9,300 45 12,100 52 9,800 53 12,300 58 10,200 58 12,400 63 11,500 66 10,800
65' 21 6,700 21 10,100 39 7,600 39 10,400 49 8,100 49 10,600 55 8,500 55 10,700 60 9,800 64 9,000
70' 34 6,200 34 8,900 45 6,700 45 9,100 52 7,100 52 9,200 57 8,400 62 7,600
75' 26 5,000 26 7,700 40 5,600 40 7,900 48 5,900 48 8,000 54 7,200 59 6,400
80' 15 4,000 15 6,700 35 4,500 35 6,900 44 4,900 44 7,000 51 6,200 56 5,400
85' 29 3,700 29 6,000 40 4,100 40 6,100 48 5,300 53 4,500
90' 21 2,900 21 5,200 36 3,300 36 5,300 44 4,500 50 3,800
95' 31 2,600 30 4,600 40 3,800 47 3,100
100' 24 2,000 24 4,000 36 3,200 44 2,500
105' 15 1,500 15 3,500 32 2,700 41 2,000
110' 27 2,200 38 1,500
115' 20 1,800
120' 8 1,500
D 0 33
Telescoping conditions (%)
Tele.
I, II I I II I II I II I II I II II I, II
mode
2nd boom 0 50 100 0 100 0 100 0 100 0 100 0 50 100
3rd boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
4th boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
Top boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
NOTE: The lifting capacity data stored in the LOAD MOMENT INDICATOR (AML-C) is based on the standard
number of parts of line listed in the chart.
Standard number of parts of line for each boom length should be according to the following table.
Boom length in feet 36.1' 36.1' to 49.2' 49.2' to 62.3' 62.3' to 141.1' Single top
(meters) (11m) (11m to 15m) (15m to 19m) (19m to 43m) Jib
Telescoping mode I, II I I II I, II I, II
9
GR-750XL RATED LIFTING CAPACITIES (IN POUNDS)
10
GR-750XL RATED LIFTING CAPACITIES (IN POUNDS)
ON OUTRIGGERS MID EXTENDED 18' 1/2"(5.5m) SPREAD
o
360 ROTATION
A 36.1' 49.2' 62.3' (19m) 75.5' (23m) 88.6' (27m) 101.7' (31m) 114.8' (35m) 128.0' 141.1'
B C (11m) C (15m) C C C C C C C C C C C (39m) C (43m)
8' 72 150,000 77 90,000
10' 68 121,200 75 90,000 79 70,500 78 44,100
12' 64 105,100 72 90,000 77 70,500 76 44,100 79 44,100 79 44,100
15' 58 87,000 68 86,500 73 70,500 73 44,100 77 44,100 77 44,100 79 44,100 79 37,500
20' 48 61,000 62 60,000 69 59,200 69 44,100 73 44,100 73 44,100 76 42,400 76 37,100 78 36,600 78 31,700
25' 33 38,700 54 37,800 64 37,300 63 42,900 69 39,100 69 43,300 73 39,100 73 32,600 76 32,400 76 28,100 78 28,500 78 24,600 79 22,000
30' 46 26,200 58 25,700 58 30,800 65 27,500 65 31,500 69 28,500 69 29,500 73 29,200 73 25,200 75 26,300 75 22,200 77 22,000 79 19,800
35' 35 19,000 52 18,500 52 23,300 60 20,200 60 24,000 66 21,200 66 24,400 70 21,900 70 23,500 73 22,300 73 20,100 75 20,300 77 18,500
40' 21 14,200 45 13,700 45 18,200 55 15,300 55 18,900 62 16,300 62 19,300 66 17,000 66 19,600 70 17,400 70 18,700 73 18,700 75 17,200
45' 38 10,200 38 14,600 50 11,700 50 15,200 58 12,700 58 15,600 63 13,300 63 15,900 67 13,800 67 16,100 70 15,200 73 14,200
50' 29 7,600 28 11,800 45 9,100 45 12,400 54 10,000 54 12,800 60 10,600 60 13,100 64 11,100 64 13,300 68 12,400 71 11,700
55' 12 5,600 11 9,700 38 7,000 38 10,300 49 7,800 49 10,600 56 8,500 56 10,900 61 9,000 61 11,100 65 10,300 68 9,600
60' 31 5,300 31 8,600 45 6,200 44 8,900 52 6,800 52 9,200 58 7,200 58 9,300 62 8,500 66 7,800
65' 22 3,900 21 7,200 39 4,800 39 7,500 48 5,400 48 7,700 55 5,800 55 7,900 60 7,100 63 6,400
70' 34 3,600 34 6,300 45 4,200 45 6,500 52 4,700 52 6,700 57 5,900 61 5,200
75' 26 2,700 25 5,300 39 3,200 39 5,500 48 3,700 48 5,700 54 4,900 58 4,200
80' 15 1,900 15 4,500 34 2,400 34 4,700 44 2,800 44 4,800 50 4,000 56 3,400
85' 28 1,700 29 3,900 40 2,100 40 4,100 47 3,300 53 2,600
90' 21 3,300 36 1,500 36 3,400 44 2,600 50 2,000
95' 30 2,900 40 2,100 47 1,400
100' 24 2,400 36 1,600
105' 15 2,000
D 0 21 0 24 0 32 45
Telescoping conditions (%)
Tele.
I, II I I II I II I II I II I II II I, II
mode
2nd boom 0 50 100 0 100 0 100 0 100 0 100 0 50 100
3rd boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
4th boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
Top boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
NOTE: The lifting capacity data stored in the LOAD MOMENT INDICATOR (AML-C) is based on the standard
number of parts of line listed in the chart.
Standard number of parts of line for each boom length should be according to the following table.
Boom length in feet 36.1' 36.1' to 49.2' 49.2' to 62.3' 62.3' to 141.1' Single top
(meters) (11m) (11m to 15m) (15m to 19m) (19m to 43m) Jib
Telescoping mode I, II I I II I, II I, II
11
GR-750XL RATED LIFTING CAPACITIES (IN POUNDS)
12
GR-750XL RATED LIFTING CAPACITIES (IN POUNDS)
ON OUTRIGGERS MIN EXTENDED 8' 10-5/16"(2.7m) SPREAD
o
360 ROTATION
A 36.1' 49.2' 62.3' (19m) 75.5' (23m) 88.6' (27m) 101.7' (31m) 114.8' (35m) 128.0' 141.1'
B C (11m) C (15m) C C C C C C C C C C C (39m) C (43m)
8' 72 128,500 77 90,000
10' 68 79,000 74 77,300 79 70,500 78 44,100
12' 64 55,700 72 54,200 76 53,200 76 44,100 79 44,100 79 44,100
15' 58 37,100 68 36,000 73 35,200 73 40,700 77 36,900 77 41,300 79 38,000 79 37,500
20' 47 21,800 61 21,100 69 20,400 68 25,200 73 21,900 73 25,700 76 22,800 76 26,100 78 23,500 78 26,300
25' 32 14,000 54 13,300 63 12,900 63 17,300 69 14,200 69 17,800 72 15,100 72 18,100 76 15,700 75 18,300 77 16,100 77 18,400 79 17,500
30' 46 8,600 58 8,100 58 12,300 64 9,600 64 12,900 69 10,400 69 13,200 72 10,900 72 13,400 75 11,400 75 13,600 77 12,700 78 11,900
35' 35 5,400 51 4,900 51 9,000 59 6,300 59 9,600 65 7,200
9,900 65 69 7,700 69 10,100 72 8,100 72 10,300 74 9,400 76 8,700
40' 21 3,100 45 2,600 45 6,600 55 4,000 55 7,200 61 4,900
7,600 61 66 5,400 66 7,800 69 5,800 69 7,900 71 7,100 74 6,300
45' 37 4,800 50 2,200 50 5,400 58 3,100
57 5,700 63 3,700 62 6,000 66 4,100 66 6,100 69 5,300 72 4,600
50' 28 3,400 44 3,900 53 1,700
53 4,300 59 2,300 59 4,600 63 2,700 63 4,700 67 3,900 69 3,200
55' 11 2,300 38 2,800 49 3,200 55 3,400 60 1,600 60 3,600 64 2,800 67 2,100
60' 31 1,900 44 2,200 52 2,500 57 2,600 61 1,900
65' 38 1,500 48 1,700 54 1,900
D 0 38 0 45 21 52 33 58 44 58 51 59 65
Telescoping conditions (%)
Tele.
I, II I I II I II I II I II I II II I, II
mode
2nd boom 0 50 100 0 100 0 100 0 100 0 100 0 50 100
3rd boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
4th boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
Top boom 0 0 0 33 16 50 33 66 50 83 66 100 100 100
NOTE: The lifting capacity data stored in the LOAD MOMENT INDICATOR (AML-C) is based on the standard
number of parts of line listed in the chart.
Standard number of parts of line for each boom length should be according to the following table.
Boom length in feet 36.1' 36.1' to 49.2' 49.2' to 62.3' 62.3' to 141.1' Single top
(meters) (11m) (11m to 15m) (15m to 19m) (19m to 43m) Jib
Telescoping mode I, II I I II I, II I, II
13
WARNING AND OPERATING INSTRUCTIONS
FOR LIFTING CAPACITIES
GENERAL
1. RATED LIFTING CAPACITIES apply only to the machine as 11. Load per line should not exceed 12,300 lbs. (5,600kg) for
originally manufactured and normally equipped by TADANO main hoist and auxiliary hoist.
LTD. Modifications to the machine or use of optional 12. Check the actual number of parts of line with LOAD MOMENT
equipment other than that specified can result in a reduction INDICATOR (AML-C) before operation. Maximum lifting
of capacity. capacity is restricted by the number of parts of line of LOAD
2. Hydraulic cranes can be hazardous if improperly MOMENT INDICATOR (AML-C). Limited capacity is as
operated or maintained. Operation and maintenance of this determined from the formula, Single line pull for main hoist
machine must be in compliance with information in the 12,300 lbs. (5,600kg) x number of parts of line.
Operation and Maintenance Manual supplied with 13. The boom angle before loading should be greater to account
the crane. If this manual is missing, order a replacement for deflection. For rated lifting capacities, the loaded boom
through the distributor. angle and the load radius is for reference only.
3. The operator and other personnel associated with this 14. The 36.1' (11.0m) boom length capacities are based on boom
machine shall fully acquaint themselves with the latest fully retracted. If not fully retracted [less than 49' (15.0m)
applicable ASME B30.5 safety standards for cranes as boom length], use the rated lifting capacities for the 49' (15.0m)
mentioned in OSHA CFR29 part 1926. boom length.
15. Extension or retraction of the boom with loads may be
SET UP attempted within the limits of the RATED LIFTING CAPACITIES.
1. Rated lifting capacities on the load chart are the maximum The ability to telescope loads is limited by hydraulic pressure,
allowable crane capacities. They are based on the machine boom angle, boom length, crane maintenance, etc.
standing level on firm supporting surface under ideal job 16. For lifting capacity of single top, reduce the rated lifting
conditions. Depending on the nature of the supporting capacities of relevant boom according to a weight reductions
surface, it may be necessary to have structural supports for auxiliary load handling equipment. Capacities of single top
under the outrigger floats or tires to spread the loads to a shall not exceed 12,300 lbs. (5,600kg) including main hook.
larger surface. 17. When base jib or top jib or both jib removing, jib state switch
2. For outrigger operation, outriggers shall be properly extended select removed.
with tires free of supporting surface before operating crane. 18. When erecting and stowing jib, be sure to retain it by hand or by
other means to prevent its free movement.
OPERATION 19. Use "ANTI-TWO BLOCK" disable switch when erecting and
1. Rated lifting capacities have been tested to and meet stowing jib and when stowing hook block. While the switch is
minimum requirements of SAE J1063-Cantilevered Boom pushed, the hoist does not stop, even when overwind condition
Crane Structures Method of Test. occurs.
2. Rated lifting capacities do not exceed 85 % of the tipping 20. For boom length 141.1' (43.0m) or less and 114.8' (35.0m) or longer
load on outriggers fully extended as determined by SAE with jib, rated lifting capacities are determined by loaded boom angle
J765-Crane Stability Test Code. only in the column handed "141.1' (43.0m)boom+jib".
Rated lifting capacities for partially extended outriggers are For boom length 114.8' (35.0m) or less with jib, rated lifting capacities
determined from the formula, Rated Lifting Capacities are determined by loaded boom angle only in the column headed
=(Tipping Load - 0.1 x Tip Reaction)/1.25. "114.8' (35.0m)boom+jib". For angles not shown, use the next lower
3. Rated lifting capacities above bold lines in the chart are loaded boom angle to determine allowable capacity.(Telescoping MODE I)
based on crane strength and those below, on its stability. For boom length 141.1' (43.0m) or less and 128.0' (39.0m) or longer
They are based on actual load radius increased by boom with jib, rated lifting capacities are determined by loaded boom angle
deflection. only in the column handed "141.1' (43.0m)boom+jib".
4. The weight of handling device such as hook blocks, slings, For boom length 128.0' (39.0m) or less with jib, rated lifting capacities
etc., must be considered as part of the load and must be are determined by loaded boom angle only in the column headed
deducted from the lifting capacities. "128.0'(39.0m)boom+jib". For angles not shown, use the next lower
5. Rated lifting capacities are based on freely suspended loads loaded boom angle to determine allowable capacity.(Telescoping MODE II)
and make no allowance for such factors as the effect of wind, 21. When lifting a load by using jib (aux. hoist) and boom (main
sudden stopping of loads, supporting surface conditions, hoist) simultaneously, do the following:
inflation of tires, operating speeds, side loads, etc. Side pull Enter the operation status as jib operation, not as boom
on the boom or jib is extremely dangerous. operation.
Such action can damage the boom, jib or swing mechanism, Before starting operation, make sure that mass of load is
and lead to overturning the crane. within rated lifting capacity for jib.
6. Rated lifting capacities do not account for wind on lifted load 22. Before telescoping the boom, set the telescoping mode selector switch to
or boom. We recommend against working under the condition MODE I or MODE II with the boom fully retracted. A change of the telescoping
that the load is out of control due to a strong wind. During mode is not permissible when the boom has been partially or fully extended.
boom lift, consider that the rated lifting capacity is reduced by 23. Crane operation is prohibited without full counterweight 12,500lbs. (5.7 ton)
50% when the wind speed is 20mph(9m/s) to 27mph(12m/s); installed. Outriggers shall be extended 23' 11 3/8" (7.3m) spread when installing
reduced by 70% when the wind speed is 27mph(12m/s) to or removing counterweight.
31mph(14m/s).If the wind speed is 31mph(14m/s) or over,
stop operation. During jib lift, stop operation if the wind speed DEFINITIONS
is 20mph(9m/s). 1. Load Radius: Horizontal distance from a projection of the axis
7. Rated lifting capacities at load radius shall not be exceeded. of rotation to supporting surface before loading to the center of
Do not tip the crane to determine allowable loads. the vertical hoist line or tackle with load applied.
8. Do not operate at boom lengths, radii, or boom angle, where 2. Loaded Boom Angle: The angle between the boom base
no capacities are shown. Crane may overturn without any section and the horizontal, after lifting the rated lifting capacity
load on the hook. at the load radius.
9. When boom length is between values listed, refer to the 3. Working Area: Area measured in a circular arc about the
rated lifting capacities of the next longer and next shorter centerline of rotation.
booms for the same radius. The lesser of the two rated lifting 4. Freely Suspended Load: Load hanging free with no direct
capacities shall be used. external force applied except by the hoist line.
10. When making lifts at a load radius not shown, use the next 5. Side Load: Horizontal side force applied to the lifted load either
longer radius to determine allowable capacity. on the ground or in the air.
14
GR-750XL RATED LIFTING CAPACITIES (IN POUNDS)
ON RUBBER
A Stationary Creep
Over Front 360o Rotation Over Front
36.1' 62.3' 88.6' 36.1' 62.3' 88.6' 36.1' 62.3' 88.6'
B C (11m) C (19m) C (27m) C (11m) C (19m) C (27m) C (11m) C (19m) C (27m)
10' 68 65,000 68 41,000 68 51,000
12' 64 60,000 64 29,000 64 44,000
15' 59 50,000 73 35,000 58 20,000 73 22,000 58 36,000 73 35,000
20' 48 34,000 69 35,000 47 12,000 68 14,000 72 10,000 48 27,000 68 28,000
25' 32 23,000 63 25,000 73 22,000 33 7,500 63 9,500 69 7,000 32 21,000 63 22,000 73 22,000
30' 58 18,000 69 19,000 58 6,500 65 5,000 58 17,000 69 18,000
35' 51 14,000 65 15,000 51 4,500 61 3,500 52 13,000 65 14,000
40' 45 11,000 62 12,000 46 3,000 57 2,300 45 10,000 61 11,000
45' 38 8,000 58 9,500 37 7,500 57 9,000
50' 28 6,000 54 7,500 28 5,500 53 7,000
55' 11 4,500 49 6,000 11 4,000 49 5,500
60' 44 5,000 44 4,500
65' 39 4,000 39 3,500
70' 33 3,000 33 2,500
D 0 0 37 54 0
Telescoping conditions (%)
Tele.
I, II II II I, II II II I, II II II
mode
2nd boom 0 0 0 0 0 0 0 0 0
3rd boom 0 33 66 0 33 66 0 33 66
4th boom 0 33 66 0 33 66 0 33 66
Top boom 0 33 66 0 33 66 0 33 66
NOTE: The lifting capacity data stored in the LOAD MOMENT INDICATOR (AML-C) is based
on the standard number of parts of line listed in the chart.
Standard number of parts of line for rubber operation should be according to the
following table.
15
WARNING AND OPERATING INSTRUCTIONS
FOR USING THE LOAD MOMENT INDICATOR (AML-C)
1. When operating crane on outriggers: When a load is lifted in the front position and then swung
Set P.T.O. switch to "ON". to the side area, make sure the value of the LOAD
Press the outrigger mode select key to register for the MOMENT INDICATOR(AML-C) is below the 360 o lifting
outrigger operation. Press the register key, then the outrigger capacity.
mode indicative symbol changes from flashing to a solid light. (2) For creep operation.
Press the lift mode select key to select the lift status that The creep capacities are attainable only when boom is
corresponds to the actual boom configuration. in the straight forward position of chassis and the over
Each time the lift mode select key is pressed, the status changes. front position symbol is on. If boom is not in the straight
Press the register key to register the lift status, then the lift forward position of chassis , never lift load.
indicative symbol changes from flashing to a solid light. 3. A slewing does not automatically stop even if the crane
when mounting and stowing jib, select the jib set status. becomes overloaded.
(the jib state indicative symbol will be flashing.) 4. During crane operation, make sure that the displays on front
2. When operating crane on rubber: panel are in accordance with actual operating conditions.
Set P.T.O. switch to "ON". 5. The displayed values of LOAD MOMENT INDICATOR
Press the outrigger mode select key. The on-tire mode (AML-C) are based on freely suspended loads and make no
indicative symbol comes on. Each time the outrigger mode allowance for such factors as the effect of wind, sudden
select key is pressed the status changes. Select the creep stopping of loads, supporting surface conditions, inflation of
operation, the on-tire mode indicative symbol flicker. tire, operating speed, side loads, etc.
Press the lift mode select key to register the boom or single top For safe operation, it is recommended when extending and
lift. lowering boom or slewing, lifting loads shall be appropriately
However, pay attention to the following. reduced.
(1) For stationary operation. 6. LOAD MOMENT INDICATOR (AML-C) is intended as an aid
The front capacities are attainable only when the over front
1
to the operator. Under no condition should it be relied upon
position symbol comes on. When the boom is more than to replace use of capacity charts and operating instruction.
o
2 degrees from centered over front of chassis, 360 Sole reliance upon LOAD MOMENT INDICATOR (AML-C)
capacities are in effect. aids in place of good operating practice can cause an
accident. The operator must exercise caution to assure
safety.
16