Scribd
Upload
21 views2 pages

Datasheet CMD

The document describes the Command CMD, a dual processor unit designed for uninterrupted operation and easy installation with local Wi-Fi for configuration. It features a web interface for monitoring and controlling connected devices, supports SNMP integration, and can manage up to 8 devices. The unit is compliant with RoHS and CE standards, with specific electrical, environmental, and mechanical specifications detailed.

Uploaded by

g.ricci
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views2 pages

Datasheet CMD

The document describes the Command CMD, a dual processor unit designed for uninterrupted operation and easy installation with local Wi-Fi for configuration. It features a web interface for monitoring and controlling connected devices, supports SNMP integration, and can manage up to 8 devices. The unit is compliant with RoHS and CE standards, with specific electrical, environmental, and mechanical specifications detailed.

Uploaded by

g.ricci
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Command CMD Querying, monitoring and remote control

Always alive
The dual processor design guarantees the uninterrupted operation of the unit in all the
situations, including the restart after the firmware upgrade. The unit can be connected
to two different power sources to guarantee the redundancy.

Simple installation
The installation is immediate: The Command has a local Wi-Fi hotspot for the first con-
figuration that can be performed simply using a smartphone.
the Command can be integrated in every management system using SNMP Connecting
all the active modules of the system to the controller is incredibly simple using the bus
port of the units. The controller identifies the connected modules and it’s immediately

HTTP
ready to operate them.
Web
interface
Everything under control

WIFI
Management
control

An intuitive web interface shows the status of every single module connected (voltage,
current and power used by the device) and control the port switching off and on when
needed.

LAN
Management
control Easy integration
The Command can be integrated in every management system using SNMP.

8
Managed
devices

9dot Smart solutions for new energy systems


Smart Power Module System
Electrical Specifications Compliance & Warranty
Operating Voltage +/- 10 a 60 Volt AC/DC RoHS Compliant Yes
Power Connector 2 x 1.31 mm2 wires terminal block Certifications CE
Ethernet Connectors 1 x Shielded RJ45 Jack with PoE Warranty consult with the nearest distributor
GND Connectors Screw M4 EMC EN 55022 Class B, EN61000-4
Transmission Speeds 10BaseT; 100BaseT Radio Atheros AR9331 802.11b/g/n 2,4 Ghz 13dBm
BUS Connectors Sì (1 x BusC-1R included)
Led 3 x LED (Status, Alarm, BUS)
Wifi 02.11 b/g/n

Management and Control


Max units managed 8 ASPI
Management Web interface and SNMP

DIN bar
SPD Specifications
Spark Over Voltage 150 Volts
Peak Surge Current 15kA
SPD Technology 2 stages: TVS, GDT

Environmental Specifications
Operating temperature -20 °C a +55 °C
Humidity 5 - 90% non condesing

Mechanical Specification
Dimensions (LxWxD) 88 x 150 x 24 (36 with flange) mm Input voltage: 10-60 volt

Weight 100gr LED: power connected


Material Varnished iron Ethernet PoE
Mounting Rack mount (with optional Staffa Rack) or DIN Rail (with optional DIN Clip)

TERMS OF USE: This device must be professionally installed. Shielded ethernet cable and earth grounding must be used as condition of product
warranty. All specifications in this document are subject to change without notice. For further information please visit www.9dot.it

You might also like