0% found this document useful (0 votes)
99 views36 pages

Tense Electronic Product Catalog

Tense Electronics is a Turkish company specializing in automation, established in 2006, that offers a wide range of products including reactive power control relays and energy monitoring systems. The company is recognized for its innovative solutions and holds various certifications, including Turkish Standards Institute authorization and CE markings. Tense Electronics focuses on continuous R&D to enhance product offerings and improve customer service, exporting to over 40 countries worldwide.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
99 views36 pages

Tense Electronic Product Catalog

Tense Electronics is a Turkish company specializing in automation, established in 2006, that offers a wide range of products including reactive power control relays and energy monitoring systems. The company is recognized for its innovative solutions and holds various certifications, including Turkish Standards Institute authorization and CE markings. Tense Electronics focuses on continuous R&D to enhance product offerings and improve customer service, exporting to over 40 countries worldwide.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 36

Future Tense of Industrial Electronics

www.tense.com.tr PRODUCT CATALOG


CONTENTS
REACTIVE POWER CONTROL RELAYS 4 DIGITAL VOLTMETER & AMMETER 15 HYDROPHORE SEQUENCING RELAYS 24
INDUCTIVE LOAD DRIVERS FOR SVC 6 DC VOLTMETER 15 PHOTOCELL RELAYS 24
STATIC CONTACTORS 6 DC AMMETER 15 SUBMERSIBLE PUMP CONTROL RELAY 25
SINGLE-PHASE SHUNT REACTORS FOR SVC 6 DIGITAL VOLTMETER 16 VOLTAGE CONTROL RELAYS 26
REMOTE COMMUNICATION 7 DIGITAL VOLTMETER (FOR REGULATORS) 16 DIGITAL PHASE PROTECTION RELAYS 27
ENERGY MONITORING SYSTEMS 7 DIGITAL AMMETER 17 PHASE PROTECTION RELAYS 27
NETWORK ANALYZERS 8 OVERLOAD RELAYS 18 TEMPERATURE CONTROL RELAYS 28
CAPACITORS (CYLINDER TYPE) 10 DIGITAL CONTACTOR & OVERLOAD RELAY 19 THERMOCOUPLES 29
L.V. CURRENT TRANSFORMERS 11 DIGITAL CONTACTOR 20 SOLID STATE RELAYS (SSR) 29
MINI SERIES L.V. CURRENT TRANSFORMERS 11 CONTACTOR COIL SUPPLY 20 RAIL MOUNTED COOLERS 29
A.G SEALED CURRENT TRANSFORMERS 11 MULTIFUNCTIONAL TIME RELAYS 20 RAIL MOUNTED SSR WITH COOLER 29
XLPE CABLE TYPE M.V CURRENT TRANSFORMERS 11 DIGITAL TIMERS 21 COUNTERS 30
COMPENSATION CONTACTORS 12 DIGITAL HOUR METER 21 CONSTANT CIRCUIT CAPACITORS 30
COMPACT SWITCHES 12 TIMERS 22 INITIAL MOVEMENT CAPACITORS 30
AUXILIARY CONTACTS 12 COMMAND & CONTROL RELAYS 23 SINGLE-PHASE SHUNT REACTORS 31
AC CONTACTORS (3 POLES) 13 FLASHER RELAYS 23 THREE-PHASE SHUNT REACTORS 31
OVERLOAD PROTECTION RELAYS 13 POTENTIOMETERS 23 SINGLE-PHASE HARMONIC FILTER REACTORS 32
MULTIMETER 14 RELAY + SOCKET 23 THREE-PHASE HARMONIC FILTER REACTORS 32
DIGITAL FREQUENCYMETER 14 LIQUID LEVEL RELAYS 24 ANALOG AMMETERS AND VOLTMETERS 33

Tense Electronics, is a Turkish producer company operating Gathering a strong name in the international market after
in automation industry since 2006 with executions in various export operations, Tense is extending the production line,
countries. team and plant regularly in order to provide the orders coming
from new accounts.
With an expertised and experienced team, Tense Electronics
is bringing novelties and adding values to automation industry Having the production plant in Istanbul, the connection point
every new day. By help of a dynamic R&D and production of European and Asian trade, Tense Electronics is exporting
teams, we update our product portfolios continuously. Brought to more than 40 countries including U.A.E., Egypt, Russia,
a contemporary approach and high quality solutions into the Ukraine, Albania, Tunisia, Libya and also have dealers and
industry, Tense is not only offering industrial solutions but also represents in many markets.
developing products and software easing the life itself.
The only company having authorization of Turkish Standards
Having a motto like “Using the technology of tomorrow Institute on Reactive Power Control Relay products, Tense
since today”, Tense Electronics has been reputable with the Electronics is also one of the rare companies holding CE, UKR-
innovative solutions and become a pioneer in automation SEPRO and GOST-R documents on its products.
industry since the first day of production.
By help of our technical teams that provide superior pre-sales
Focusing on R&D activities in order to develop new and after-sales services, we are aiming to provide the best
technologies, Tense Electronics is inventing new product product with best price in shortest time with fastest and most
categories and solutions all the time. active customer service.

Our goals are, with better Energy quality, energy efficiency, communication with
energy tracking, compensation and automation solutions
NOVELTIES

RGM-12S TPM-04SHD / TPM-04 SHDL


Graphic LCD Display Single-Phase Reactive Power Control Relay DIN Type Network Analyzers
7 Different Compensation Programs • 3p4w connections.
• Measures up to 31st voltage harmonics (l-n and l-l).
Manual Compensation Option
• Measures up to 31st current harmonics.
Easy to Install and Use with 20mm. 4 Digit Led Display
• RS485 modbus RTU
Can Only Compensate Inductive Systems
• 2x relay outputs (adjustable), 1x digital input
Automatic Step Measurement • Displays the demands.
Step Drive, Release and Discharge Times are Adjustable • You can delete energies and demands.
Voltage and Current Harmonic Alarm Values Adjustable • The menu is password protected.
Over and Under Compensation Alarm Values Can Be Set • Screenless model led display and 53 x 31.5 Custom design glass LCD
Voltage, Harmonic Voltage/Current, Over and Under Compensation Alarm Output
Voltage, Current and Frequency Values Can Be Monitored
Page : 8
Active Power, Reactive Power and Apparent Power Values Can be Monitored
Up to the 15th harmonic THD-I Can Be Monitored
Up to the 15th harmonic THD-V Can Be Monitored
Cosine Value Can Be Monitored
Power Factor Value Can Be Monitored
Capacitive/Active and Inductive/Active Ratios Can Be Monitored
Automatic Fan Output
Step Values Can Be Monitored
Same Aging in Steps (In Certain Compensation Programs)
Page : 4
PTM-01 / PTM-02
Digital Potentiometer with Analogue Output
• Microprocessor based digital potentiometer • Microprocessor based digital potentiometer
• 0-10V analog output • 4-20mA analog output
• Analogue output control possibility with external • Analogue output control possibility with external
digital inputs digital inputs
• Ramp function • Ramp function
• Possibility of lower and upper limit adjustment • Possibility of lower and upper limit adjustment
HM-48D (for Scale and Set values) (for Scale and Set values)
• SET value setting limitation (Unauthorized use • SET value setting limitation (Unauthorized use
Digital Hour meter The set feature can be turned off to prevent it) The set feature can be turned off to prevent it)

Page : 21 Page : 23

ERD-48T
DRV-10 Digital Timer Relay
Digital Timer with ON/OFF delays With trigger on off delay
• 0.1 Sec. - 99 Minutes time setting range
• On Delay
• On delay and off delay option
• Off Delay
• External trigger input
• With Trigger
• 220v ac - 24v ac / dc two separate supply inputs
• 0.1 sec - 999 sec.
• 2x7 mm display screen
• 0.1 min - 999 min.
• 1x relay output
• 1x3 LED Display
Page : 20 • Relay and Trigger Status Indicators
Page : 21
RGT-MT18 SVC RGT-12SVC RGT-18SVC ROG-MT18 SVC

SVC REACTIVE POWER CONTROL RELAY (TCR OUTPUT) Up to 10 TCR (SVC) can be connected to our TCR (SVC) Supported Reactive Power Control Relays for higher powers.

Three-Phase Shunt Reactor

Modbus RTU over RS485


Panel Temperature Control
Single-Phase Shunt Reactor
Two-Phase Shunt Reactor

Reactive Energy (kVArh)


Three-Phase Capacitor

2.- 61st Harmonic (V-I)


2.- 31st Harmonic (V-I)
Single-Phase Capacitor
Two-Phase Capacitor

Reactive Power (VAr)


Relay Output (Alarm)
Voltage (V), Current (I)

Active Energy (kWh)


3 Phase 3 Current

Power Flow Chart


Power Factor (Pf)

Active Power (W)


Number of Steps

Generator Mode

Graphic Display
Alarm Status

Time - Date

THD V %
% THD I
Cos ϕ
Dimensions

TCR
Product Code Description (mm)

Reactive power control relay


RGT-MT18 SVC Touch screen 144 x 144 18+TCR  

RGT-12 SVC Reactive power control relay 144 x 144 12+TCR     

RGT-18 SVC Reactive power control relay 144 x 144 18+TCR     

Reactive power control relay


ROG-MT18 SVC
Medium Voltage Referenced
144 x 144 18+TCR  

RGM-12S RGT-12E RGT-18E RGT-24H

REACTIVE POWER CONTROL RELAYS


Three-Phase Shunt Reactor
Two-Phase Shunt Reactor

Modbus RTU over RS485


Single-Phase Shunt Reactor

Reactive Energy (kVArh)


Three-Phase Capacitor
Single-Phase Capacitor
Two-Phase Capacitor

Reactive Power (VAr)


Active Energy (kWh)

Thyristor Triggered
1 Phase 1 Current
3 Phase 3 Current

Power Flow Chart


Active Power (W)
Number of Steps

Generator Mode
Alarm Status
Voltage (V)
Current (I)

% THD V
% THD I
Cos ϕ

Dimensions
Product Code Description (mm)

RGM-12S 4x20 mm display single-phase reactive power control relay 144 x 144 12    

RGT-12E Graphic LCD display three-phase reactive power control relay 144 x 144 12 

RGT-18E Graphic LCD display three-phase reactive power control relay 144 x 144 18 
LCD display three-phase reactive power control relay
RGT-24H
RS485
144 x 144 24   

4
THE FIRST AND ONLY, REACTIVE POWER CONTROL RELAY OF THE TURKEY
WITH TOUCH SCREEN AND SVC.

REACTIVE POWER CONTROL RELAYS WITH CERTIFIED SVC

STATIC
VAR
COMPENSATION
RGT-MT18 SVC STATIC
VAR
COMPENSATION
RGT-12 SVC RGM-12S
REACTIVE POWER CONTROL RELAY REACTIVE POWER CONTROL RELAY REACTIVE POWER CONTROL RELAY
• Easy installation and operation with 5” touch (resistive) • Easy setup and usage with 128x64 graphic LCD • 7 Different Compensation Programs
display • TCR (SVC) connection can be made. • Manual Compensation Option
• TCR (SVC) connection available • Up to 10 inductive load drivers can be connected. • Easy to Install and Use with 20mm. 4 Digit Led Display
• Up to 10 inductive load drivers can be connected. • Generator input and generator compensation • Can Only Compensate Inductive Systems
• Generator input and generator compensation • Modbus RTU over RS485 • Automatic Step Measurement
• Modbus RTU over RS485 • Hourly, daily, monthly and total compensation rates can be • Step Drive, Release and Discharge Times are Adjustable
• Temperature measurement and control followed. • Voltage and Current Harmonic Alarm Values Adjustable
• Can compensate inductive and capacitive systems • Can compensate inductive and capacitive systems • Over and Under Compensation Alarm Values Can Be Set
• Step value can be entered manually • Step value can be entered manually • Voltage, Harmonic Voltage/Current, Over and Under
• Single-Phase, two-phase and three-phase capacitor and • Single-Phase, two-phase and three-phase capacitor and Compensation Alarm Output
shunt reactor can be connected shunt reactor • Voltage, Current and Frequency Values Can Be Monitored
• English language. can be connected
• Active Power, Reactive Power and Apparent Power Values
• Voltage, harmonic current / voltage, inductive and • Current harmonics up to 31st harmonic can be observed Can be Monitored
capacitive alarm output • Voltage harmonics up to 31st harmonic can be observed • Up to the 15th harmonic THD-I Can Be Monitored
• Temperature alarm output • Voltage, harmonic current / voltage, inductive and capacitive • Up to the 15th harmonic THD-V Can Be Monitored
• Intervention, discharge and settlement times are adjustable alarm output
• Cosine Value Can Be Monitored
• Current harmonics up to 61st harmonic can be monitored • Adjustable discharge and settlement time, intervention
• Power Factor Value Can Be Monitored
• Voltage harmonics up to 61st harmonic can be monitored • Monitor cosine values of each phase
• Capacitive/Active and Inductive/Active Ratios Can Be
• Graphical monitoring of cosine values of each phase • Power factor values of each phase can be tracked Monitored
• Power factor values of each phase can be tracked • Capacitive / active and inductive / active ratios can be • Automatic Fan Output
graphically monitored
• Step Values Can Be Monitored
• Capacitive / Active and inductive / Active ratios can be • Total energies (import / export) can be tracked
• Same Aging in Steps (In Certain Compensation Programs)
tracked graphically • THD-V and THD-I values of each phase can be monitored
• Total energies (import / export) can be tracked • Creating power analysis (20 samples 9999 min.)
• THD-V and THD-I values of each phase can be monitored • Min, max and average values of current and voltage for each
• Creating power analysis (20 samples 9999 min.) phase
can be monitored.
• Demand recording (active power, reactive power, apparent
power and current demand) • Password protection

• Min, max and average values of current and voltage for • Co-aging in stages
each phase can be monitored.
• Real time date and hour
• Password protection
• Gradual co-aging
We keep on empowering your power by
bringing our Reactive Power Control Relay
product into Turkish Standard Institution.

High quality standards and innovative solutions


in compensation systems
5
SRL-30T

SRL-10T SRL-20T

SRL-5T

INDUCTIVE LOAD DRIVERS FOR SVC


To Be Used To Be Used Micro
Maximum Connectable Shunt Cable cross Maximum Fuse ModBus Processor Manual
Product Code Description Operating Voltage Dimensions (mm) Reactor Power section Current Interface Based Test

SRL-5T Max: 5 KVar 85-260 V AC 102 x 130 x 101 mm 3x TNS-1,66 (230V) 2,5 mm² 16 A   

SRL-10T Max: 10 KVar 85-260 V AC 170 x 134 x 123 mm 3x TNS-3,3 (230V) 10 mm² 25 A   

SRL-20T Max: 20 KVar 85-260 V AC 170 x 130 x 140 mm 3x TNS-6,67 (230V) 16 mm² 63 A   

SRL-30T Max: 30 KVar 85-260 V AC 170 x 130 x 140 mm 3x TNS-10S (230V) 35 mm² 100 A   

TNS-10S

TNS-3,3S
TNS-1,66S

SINGLE-PHASE SHUNT REACTORS FOR SVC


(INDUCTIVE LOAD REACTORS)
Thermal INDUCTANCE CURRENT (A)
Product Code Description POWER (kVAr) 230V AC Protection Sheet Type (mH) (rms) WEIGHT (kg)

TNS-1,5 Shunt Reactor 1,5  E-I 113 6,52 9,2

TNS-1,66S Shunt Reactor 1,66  E-I 102 7,22 10

TNS-3 Shunt Reactor 3  E-I 56,3 13,04 17,5

TNS-3.3S Shunt Reactor 3,3  E-I 48,3 14,48 22,5

TNS-5 Shunt Reactor 5,0  E-I 33,8 21,75 30,5

TNS-6.67S Shunt Reactor 6,67  U-I 24,1 30,43 26,0

TNS-7.5 Shunt Reactor 7,5  U-I 22,5 32,61 26,0

TNS-10S Shunt Reactor 10  U-I 16,9 43,48 37,6

6
ETH-MOD-T
USB-CON OP-USB OP-232

REMOTE COMMUNICATION
Product Code Description

OP-232 Optical reader, communication via RS-232, neodymium magnet

OP-USB Optical reader, communication with USB 1.1 / USB 2.0, with neodymium magnet

USB-CON RS-232 USB converter and RS-485 USB converter, 300bps - 230.4 Kbps Baudrate, isolated

ETH-MOD-T Ethernet Modem, RS-485, TCP-IP compatible, 10/100 Mbps ethernet, isolated, ModBus communication, Maximum 115200 Bps

Well Warehouse Communication System, ISM 868 MHz, GFSK Modulation, RS 485 Interface, Maximum 57600 Bps RF Communication Speed,
RF-MOD-TR-RC Antenna: 9 dBi SMA Connector magnet mounting, Maximum 5 km communication distance (Provided that the antennas can recognize each other)

HA-5 External antenna 5 dBI, 824 ~ 960/1710 ~ 2170 MHz, 3 Meter cable, SMA Connector, Magnet mount

HA-9 External antenna 9 dBI, 824 ~ 960/1710 ~ 2170 MHz, 3 Meter cable, SMA Connector, Magnet mount

OPERATING PRINCIPLE OF WELL - TANK COMMUNICATION SYSTEM

SOLAR PANEL

WELL SUBMERSIBLE PUMP TANK FACTORY OR HOME APPLICATION

7
NETWORK ANALYZERS

Alarm Status (Depends on Records)


Reactive Power (Q1, Q2, Q3, Q)
Apparent Power (S1, S2, S3, S)
3 x Voltage (Phase-Neutral V)

Power Factor (PF1, PF2, PF3)


3 x Voltage (Phase-Phase V)

Active Power (P1, P2, P3, P)

Neutral Fault Measurement


Current-Voltage Irregularity

Modbus RTU over RS485


2nd-63rd Harmonic (V-I)
2nd-55th Harmonic (V-I)

7 Segment LED Display


Maximum Values (Max)

2nd-31. Harmonic (V-I)

96x96 mm Panel Type


Minimum Values (Min)

128 x 64 Graphic LCD


Mean Values (Mean)
3 x Frequency (Hz)

Event Recording
Relay 1x Output
Relay 2x Output

3.7" Glass LCD


1x Digital Input
3 x Current (A)

53 x31.5 LCD
Pulse Output

Time / Date
3 x Cos ϕ

Demands

Rail Type
% THD V
% THD I
Product Code Description

TPM-01E Energy analyzer               


Energy analyzer
TPM-01 ES Modbus RTU over RS485                     
Energy analyzer
TPM-01 ESH Modbus RTU over RS485                      
Energy analyzer
TPM-02 Modbus RTU over RS485                     
Energy analyzer
TPM-03 Modbus RTU over RS485                           
Energy analyzer
TPM-04 Modbus RTU over RS485                     
Energy analyzer
TPM-04 SH Modbus RTU over RS485                      
Energy analyzer
TPM-04SHD Modbus RTU over RS485                     
Energy analyzer
TPM-04SHDL Modbus RTU over RS485                      
Energy analyzer
TPM-05 Modbus RTU over RS485                         

Standard measurement parameters of our Energy Analyzer groups


• It displays the summative (P1, P2, P3, P) powers of each phase. • Displays the minimum, maximum and average values of phase-neutral and phase-phase voltage (V).

• It displays the total apparent (S1, S2, S3, S) powers of each phase. • It displays the sum (I1, I2, I3, IΣ) values of each phase.

• It displays the total reactive (Q1, Q2, Q3, Q inductive or capacitive) powers of each phase • Displays total import and export active (ΣkWh) energy.

• It displays the power factors (PF) and Cosφ values of each phase. • Displays total inductive and capacitive reactive (kVArh) energy.

Aesthetic Slim Case, easy assembly system. Thanks to the 180 degree terminal structure, there is no problem of cable bending.
6,0 mm

97,5 mm 6,0 mm
59 mm
26 mm 26 mm
97,5 mm

89,7 mm
61,6 mm

Back view Bottom view Side view Easy cable entry

8
TPM-05 TPM-04 / TPM-04 SH
• It supports 3P4W connections.
• It supports 3P4W connections.
• Measures the 55th voltage harmonics (L-N and L-L).
• Measures up to 31st voltage harmonics (L-N and L-L).
• Measurements up to the 55th current harmonic.
• Measures up to 31st current harmonics.
• RS485 Modbus RTU
• RS485 Modbus RTU
• 2x relay outputs (adjustable), 1x Digital Input
• 2x Relay outputs (adjustable), 1x Digital Input
• Event logs (high voltage, low voltage, power failure, voltage imbalance, high current, current
• It shows the demands.
irregularity, THDV and THDI limits)
• You can delete energies and demands.
• Displays the demands.
• The menu is password protected.
• You can delete energies, requests and event logs.
• 71.5 x 61.5 Custom Design Glass LCD
• Date and time can be set.
• Real time clock.
• The menu is password protected.
• 71.5 x 61.5 Custom Design Glass LCD

TPM-01E / TPM-01ES / TPM-01ESH TPM-04SHD / TPM-04 SHDL


• It supports 3P4W connections • Supports 3P4W connections.
• Measures up to 31st voltage harmonics (L-N and L-L). • Measures up to 31st voltage harmonics (L-N and L-L).
• Measures up to 31st current harmonics. • Measures up to 31st current harmonics.
• RS485 Modbus RTU • RS485 Modbus RTU
• 2x relay outputs (adjustable), 1x digital input • 2x relay outputs (adjustable), 1x Digital Input
• It shows the demands. • It displays the demands.
• You can delete energies, demands. • You can delete energies and demands.
• The menu is password protected. • The menu is password protected.
• 4 Row Led display • Without display screen (LED display) and 53 x 31.5 Custom design glass LCD

9
CAPACITORS (CYLINDER TYPE)
230V SINGLE-PHASE LOW VOLTAGE POWER CAPACITORS
50 HZ (230V AC)
Capacitor Size Weight
Product Code Power (Diameter x Height) (Approx) Quantity per box
(kVAr) Capacitive Power Current (mm) (kg)
(kVAr) (A)

TMK-0.25 0,25 kVAr 0.25 1,08 50 x 135 0,50 20

TMK-0.5 0,5 kVAr 0.5 2.17 50 x 135 0,50 15

TMK-1 1 kVAr 1 4.34 65 x 130 0,60 12

TMK-1.5 1,5 kVAr 1.5 6.52 65 x 130 0,60 12

TMK-2.5 2,5 kVAr 2.5 10.86 75 x 196 1,00 12

TMK-5 5 kVAr 5 21.73 90 x 203 1,50 12

TMK-7.5 7,5 kVAr 7.5 32.60 116 x 243 2,72 12

TMK-10 10 kVAr 10 43.47 116 x 243 2,72 8

* Cylinder capacitors should be mounted


400V - 415V - 440V THREE-PHASE LOW VOLTAGE POWER CAPACITORS vertically to the panel.

Capacitor Power (kVAr)


Size Weight
Capacitor Power
Product Code Capacitance Current (Diameter x Height) (Approx) Quantity per box
(kVAr)
400 V 415 V 440 V (mm) (kg)

TTK-0.5 0,5 kVAr 0,5 0,54 0,61 3x3.32 0.72 50x125 0.50 20

TTK-1 1 kVAr 1 1,08 1,21 3x6.63 1.44 50x125 0.50 15

TTK-1.5 1,5 kVAr 1,5 1,62 1,82 3x9.95 2.17 50x125 0.50 15

TTK-2.5 2,5 kVAr 2,5 2,69 3,03 3x16.58 3.61 65x130 0.60 15

TTK-5 5 kVAr 5 5,38 6,05 3x33.17 7.22 75x196 1.00 12

TTK-7.5 7,5 kVAr 7,5 8,07 9,08 3x49.76 10.83 75x196 1.00 12

TTK-10 10 kVAr 10 10,76 12,1 3x66.35 14.43 90x203 1.50 8

TTK-12.5 12,5 kVAr 12,5 13,45 15,12 3x82.93 18.04 90x203 1.50 8

TTK-15 15 kVAr 15 16,15 18,15 3x99.52 21.65 90x243 1.72 8

TTK-20 20 kVAr 20 21,53 24,2 3x132.69 28.87 116x243 2.80 8

TTK-25 25 kVAr 25 26,91 30,25 3x165.87 36.09 116x243 2.80 8

TTK-30 30 kVAr 30 32,29 36,3 3x199.05 43.30 116x283 3.20 8

TTK-40 40 kVAr 40 43,06 48,4 3x265.39 57.74 136x346 5.65 6

TTK-50 50 kVAr 50 53,82 60,5 3x331.74 72.17 136x346 5.65 6

525V THREE-PHASE LOW VOLTAGE POWER CAPACITORS 690V THREE-PHASE LOW VOLTAGE POWER CAPACITORS
Output Output
Size Size
Capacitor Power (VA) Weight Power (VA) Weight
Capacitance (Diameter x Quantity Product Capacitor Capacitance (Diameter Quantity
Product Code Power Current (Approx) Current (Approx)
mf Height) per box Code Power(kVAr) mf x Height) per box
(kVAr) (kg) (kg)
525 V (mm) 690 V (mm)

TTKB-5 5 kVAr 5 3x19.26 5.50 75x196 1.00 8 TTKA-12.5 12,5 kVAr 12,5 3x27.87 10.46 90x243 1.72 4

TTKB-7.5 7,5 kVAr 7,5 3x28.89 8.25 75x196 1.00 8 TTKA-15 15 kVAr 15 3x33.48 12.55 90x243 1.72 4

TTKB-10 10 kVAr 10 3x38.52 11.00 90x203 1.50 8 TTKA-20 20 kVAr 20 3x44.59 16.74 116x243 2.80 5

TTKB-12.5 12,5 kVAr 12,5 3x48.14 13.75 90x203 1.50 5 TTKA-25 25 kVAr 25 3x55.74 20.92 116x243 2.80 5

TTKB-15 15 kVAr 15 3x57.77 16.50 90x243 1.72 5

TTKB-20 20 kVAr 20 3x77.03 21.99 116x243 2.60 5

TTKB-25 25 kVAr 25 3x96.29 27.49 116x243 2.70 5

TTKB-30 30 kVAr 30 3x115.55 32.99 116x243 2.80 5

10
MINI SERIES L.V CURRENT TRANSFORMERS
Busbar Dimensions Input / Output Output Power
Product Code Class
(mm) Current (VA)

ATM-40 20 mm 1 40/5 1

ATM-50 20 mm 1 50/5 1

ATM-60 20 mm 1 60/5 1

ATM-75 20 mm 1 75/5 1,5


L.V. CURRENT TRANSFORMERS ATM-100 30 X10 mm 1 100/5 1,5

Busbar Dimensions Input / Output Output Power ATM-125 30 X10 mm 1 125/5 1,5
Product Code Class
(mm) Current (VA)

ATM-150 30 X10 mm 0,5 150/5 2,5


AT-100 30X10 mm 0,5 100/5 1,5
ATM-200 30 X10 mm 0,5 200/5 2,5
AT-125 30X10 mm 0,5 125/5 2,5
ATM-250 30 X10 mm 0,5 250/5 2,5
AT-150 30X10 mm 0,5 150/5 2,5
ATM-300 30X10 mm 0,5 300/5 2,5
AT-200 30X10 mm 0,5 200/5 2,5
ATM-400 30X10 mm 0,5 400/5 2,5
AT-250 30X10 mm 0,5 250/5 5

AT-300 30X10 mm 0,5 300/5 5

AT-400 40X10 mm 0,5 400/5 5

AT-500 40X10 mm 0,5 500/5 5

AT-600 40X10 mm 0,5 600/5 7,5

AT-750 60X10 mm 0,5 750/5 15

AT-800 60X10 mm 0,5 800/5 15 XLPE CABLE TYPE


AT-1000 80X10 mm 0,5 1000/5 15
M.V CURRENT TRANSFORMERS
AT-1250 80X10 mm 0,5 1250/5 20
Primary Secondary Output
Hole
Product Code Description Current Current Power
AT-1500 100X10 mm 0,5 1500/5 25 Size
(A) (A) (VA)

AT-1600 100X10 mm 0,5 1600/5 25


M.V. Toroid Current
AT-2000 100X10 mm 0,5 2000/5 30 OG-AT/40 Transformer
68 mm 40 1 1,25

AT-2500 100X10 mm 0,5 2500/5 40


M.V. Toroid Current
AT-3000 100X10 mm 0,5 3000/5 40 OG-AT/100 Transformer
68 mm 100 5 5

AT-4000 100X10 mm 0,5 4000/5 40


It shouldn’t be connected to M.V busbars. It is only used with XLPE Cables

NEW AC/DC (100V-240V) CONTACTORS (3 POLES) 100V - 240V AC/DC

Rated Power (kW)


Thermal
Rated Current Auxiliary
Product Code Description Operation Voltage Current
(A 380/400 V) Contac
(A)
AC-3

UEC1-40C11KU7D NEW AC 3 Poles Contactor 100V - 240V AC/DC 18.5 kW-40A 60 1NO + 1NC

UEC1-50C11KU7D NEW AC 3 Poles Contactor 100V - 240V AC/DC 22 kW-50A 80 1NO + 1NC

UEC1-65C11KU7D NEW AC 3 Poles Contactor 100V - 240V AC/DC 30 kW-65A 80 1NO + 1NC

UEC1-80C11KU7D NEW AC 3 Poles Contactor 100V - 240V AC/DC 37 kW-80A 125 1NO + 1NC

UEC1-100C11KU7D NEW AC 3 Poles Contactor 100V - 240V AC/DC 45 kW-95A 125 1NO + 1NC

11
COMPENSATION CONTACTORS Product Code Description
Power (kVAr) Power (kVAr) Auxiliary
230V 400V Contacts

KMP-5 kVAr 5 kVAr Compensation Contactor 2,8 5 1NC+2 NO

KMP-10 kVAr 10 kVAr Compensation Contactor 5,0 10 1NK+2NA

KMP-15 kVAr 15 kVAr Compensation Contactor 8,5 15 1NK+2NA

KMP-20 kVAr 20 kVAr Compensation Contactor 11,0 20 1NK+2NA

KMP-25 kVAr 25 kVAr Compensation Contactor 14,0 25 1NK+2NA

KMP-30 kVAr 30 kVAr Compensation Contactor 20,0 30 1NK+2NA

KMP-40 kVAr 40 kVAr Compensation Contactor 25,0 40 1NK+2NA

KMP-50 kVAr 50 kVAr Compensation Contactor 29,0 50 1NK+2NA

KMP-60 kVAr 60 kVAr Compensation Contactor 29,0 50 1NK

COMPACT SWITCHES Rated


Pole Cut off
(WITH 3 POLES - STABLE) Product Code Description
Numbers capacitiy
Current
(A)

UEM5-100L/80 Compact Switches 80A 3P 35 kA 80

UEM5-100L/100 Compact Switches 100A 3P 35 kA 100

UEM5-250L/125 Compact Switches 125A 3P 35 kA 125

UEM5-250L/160 Compact Switches 160A 3P 35 kA 160

UEM5-250L/200 Compact Switches 200A 3P 35 kA 200

UEM5-250L/250 Compact Switches 250A 3P 35 kA 250

UEM5-400L/315 Compact Switches 300A 3P 50 kA 300

UEM5-400L/400 Compact Switches 400A 3P 50 kA 400

UEM5-630L/630 Compact Switches 630A 3P 65 kA 630

AUXILIARY CONTACTS
Contacts
Product Code Description
Structure

CA1S11 Side Auxiliary Contact 1NO + 1NC

CA1R22 Upper Auxiliary Contact 2NO + 2NC

12
Rated Power

AC CONTACTORS (WITH 3 POLES) Product Code Description


(kW)
Rated Current
(A 380/400 V)
Thermal
Current
(A)
Auxiliary
Contac
AC-3

UEC3-09C AC 3 Pole Contactor 4 kW-9A 25 1NO

UEC1-09C AC 3 Pole Contactor 4 kW-9A 25 1NO + 1NC

UEC3-12C AC 3 Pole Contactor 5.5 kW-12A 25 1NO

UEC1-12C AC 3 Pole Contactor 5.5 kW-12A 25 1NO + 1NC

UEC3-18C AC 3 Pole Contactor 7.5 kW-18A 32 1NO

UEC1-18C AC 3 Pole Contactor 7.5 kW-18A 32 1NO + 1NC

UEC1-25C AC 3 Pole Contactor 11 kW-25A 40 1NO + 1NC

UEC1-32C AC 3 Pole Contactor 15 kW-32A 50 1NO + 1NC

UEC1-38C AC 3 Pole Contactor 18 kW-38A 50 1NO + 1NC

UEC1-40C AC 3 Pole Contactor 18.5 kW-40A 60 1NO + 1NC

Rated Power
UEC1-50C AC 3 Pole Contactor 22 kW-50A 80 1NO + 1NC
(kW) Thermal
Product Code Description Rated Current Current
Auxiliary UEC1-65C AC 3 Pole Contactor 30 kW-65A 80 1NO + 1NC
Contact
(A 380/400 V) (A)
AC-3 UEC1-80C AC 3 Pole Contactor 37 kW-80A 125 1NO + 1NC

UEC1-09CB-24V 24 V AC 3 Pole Contactor 4 kW-9A 25 1NO + 1NC UEC1-95C AC 3 Pole Contactor 45 kW-95A 125 1NO + 1NC

UEC1-12CB-24V 24 V AC 3 Pole Contactor 5.5 kW-12A 25 1NO + 1NC UEC1-115C AC 3 Pole Contactor 55 kW-115A 200 -

UEC1-18CB-24V 24 V AC 3 Pole Contactor 7.5 kW-18A 32 1NO + 1NC UEC1-150C AC 3 Pole Contactor 75 kW-150A 200 -

UEC1-25CB-24V 24 V AC 3 Pole Contactor 11 kW-25A 40 1NO + 1NC UEC1-170C AC 3 Pole Contactor 90 kW-170A 200 -

UEC1-32CB-24V 24 V AC 3 Pole Contactor 14 kW-32A 50 1NO + 1NC UEC1-185FM7 AC 3 Pole Contactor 95 kW-185A 230 -

UEC1-38CB-24V 24 V AC 3 Pole Contactor 17 kW-38A 50 1NO + 1NC UEC1-225FM7 AC 3 Pole Contactor 130 kW-225A 260 -

UEC1-50CB-24V 24 V AC 3 Pole Contactor 22 kW-50A 80 1NO + 1NC UEC1-330FM7 AC 3 Pole Contactor 200 kW-330A 400 -

UEC1-65CB-24V 24 V AC 3 Pole Contactor 30 kW-65A 80 1NO + 1NC UEC1-400FM7 AC 3 Pole Contactor 250 kW-400A 500 -

UEC1-80CB-24V 24 V AC 3 Pole Contactor 37 kW-80A 125 1NO + 1NC UEC1-500FM7 AC 3 Pole Contactor 300 kW-500A 600 -

UEC1-95CB-24V 24 V AC 3 Pole Contactor 45 kW-95A 125 1NO + 1NC UEC1-630FM7 AC 3 Pole Contactor 400 kW-630A 1000 -

OVERLOAD PROTECTION RELAYS Product Code Description


Thermal
Adjustment Pitch
Contactor Block to Use
Insulation
Voltage
Pulse Strength
Voltage
Together
(A) (Ui) (Uimp)

UER1-40/2.5BZ Overload Relay 1.8 - 2.5 UEC1-09C ~ 38C 690 V 6 kV

UER1-40/4.0BZ Overload Relay 2.9 - 4.0 UEC1-09C ~ 38C 690 V 6 kV

UER1-40/6.3BZ Overload Relay 4.5 - 6.3 UEC1-09C ~ 38C 690 V 6 kV

UER1-40/10BZ Overload Relay 7.0 - 10 UEC1-09C ~ 38C 690 V 6 kV

UER1-40/12.5BZ Overload Relay 9 - 12,5 UEC1-12C ~ 38C 690 V 6 kV

UER1-40/16BZ Overload Relay 11.3 - 16 UEC1-12C ~ 38C 690 V 6 kV

UER1-40/25BZ Overload Relay 21 - 25 UEC1-25C ~ 38C 690 V 6 kV

UER1-40/30BZ Overload Relay 24.5 - 30 UEC1-32C ~ 38C 690 V 6 kV

UER1-40/36BZ Overload Relay 29 - 36 UEC1- 38C 690 V 6 kV

UER1-90/36BZ Overload Relay 24.5 - 36 UEC1-40C ~ 95C 690 V 6 kV

UER1-90/47BZ Overload Relay 35 - 47 UEC1-50C ~ 95C 690 V 6 kV

UER1-90/60BZ Overload Relay 45 - 60 UEC1-65C ~ 95C 690 V 6 kV

UER1-90/75BZ Overload Relay 58 - 75 UEC1-80C ~ 95C 690 V 6 kV

UER1-90/90BZ Overload Relay 72 - 90 UEC1-95C 690 V 6 kV

UER1-90/97BZ Overload Relay 77 - 97 UEC1-95C 690 V 6 kV

13
EM-72 EM-07 EM-06DIN EM-06 EM-250D

MULTIMETER

High Low Frequency Protection


Current Asymmetry Protection
Voltage Asymmetry Protection
3x Voltage (Phase-Neutral-V)

High-Low Voltage Protection


3 x Voltage (Phase-Phase-V)

High Low Current Protection

Phase Sequence Protection


Modbus RTU over RS485

18x7.2 mm Led Display


16x9 mm Led Display

18x9 mm Led Display

Demurrage Multiplier

Panel End (96 x 96)

Panel End (72 x 72)


3 x Frequency (Hz)

Demurrage Time
Phase Sequence
Apparent Power

3.7" Glass LCD

Rail Type (DIN)


Contact Output
3 x Current (A)

CT-120

CT-300
X/5 CT
Product Code Description

Direct multimeter with set


EM-07 Modbus RTU over RS485                   
Multimeter
EM-07E Modbus RTU over RS485          
Direct multimeter with set
EM-07D 300 A Modbus RTU over RS485                   

EM-06 Multimeter        

EM-72 Multimeter        
Direct Multimeter
EM-250D 250 A        

EM-06DIN Multimeter        
Direct Multimeter
EM-250DIN 250 A        

DJ-F96 DJ-F72
DF-DIN
DJ-F48
DJ-F36

DIGITAL FREQUENCY METER


Panel Type

Rail Type

Product Code Description Dimensions (mm) Display

DJ-F96 Digital Frequencymeter 1 - 400 Hz.(15V - 500V AC) 96 x 96 3 x 20 mm 

DJ-F72 Digital Frequencymeter 1 - 400 Hz.(15V - 500V AC) 72 x 72 3 x 14 mm 

DJ-F48 Digital Frequencymeter 1 - 400 Hz.(15V - 500V AC) 48 x 48 3 x 9 mm 

DJ-F36 Digital Frequencymeter 1 - 400 Hz.(15V - 500V AC) 36 x 72 3 x 14 mm 

DF-DIN Digital Frequencymeter 1 - 400 Hz.(15V - 500V AC) DIN TYPE 3 x 9 mm 

14
DAV-120 DAV-300 DAV-72D

DIGITAL VOLTMETER & AMMETER

Panel Type
X / 5 C.T.

Rail Type
Voltage Current

CT-120

CT-300
Measuring Range Measuring Range
Product Code Description Dimensions (mm) Display (AC) (AC)

DAV-120 Digital Voltmeter & Ammeter (50/60 Hz) DIN TYPE 6 x 9 mm 150V - 260V 1A - 100A  
DAV-300 Digital Voltmeter & Ammeter (50/60 Hz) DIN TYPE 6 x 9 mm 150V - 260V 2A - 250A  
DAV-72D Digital Voltmeter & Ammeter (50/60 Hz) 72 x 72 6 x 14 mm 150V - 260V 1A - 100A  

DJ-V72DC
DJ-V48DC
DJ-V36DC

DC VOLTMETER
Product Code Description

DJ-V72DC Digital DC Voltmeter 1V - 300V DC, 3 digits 14 mm Display (72 x 72)

DJ-V48DC Digital DC Voltmeter 1V - 300V DC, 3 digits 9 mm Display (48 x 48)

DJ-V36DC Digital DC Voltmeter 1V - 300V DC, 3 digits 14 mm Display (36 x 72)

DJ-A72DC DJ-A48DC
DJ-A36DC SHUNTS
Product Code Description

SNT60-30 30A , 60mV Shunt

SNT60-40 40A , 60mV Shunt

DC AMMETER (60 mV SHUNT) SNT60-50 50A , 60mV Shunt

Product Code Description SNT60-60 60A , 60mV Shunt

DJ-A72DC Digital DC Ammeter 100mA - 990A DC, 3 digits 14 mm Display (72 x 72), XA/60 mV Shunt
SNT60-100 100A , 60mV Shunt

DJ-A48DC Digital DC Ammeter 100mA - 990A DC, 3 digits 9 mm Display (48 x 48), XA/60 mV Shunt
SNT60-150 150A , 60mV Shunt

DJ-A36DC Digital DC Ammeter 100mA - 990A DC, 3 digits 14 mm Display (36 x 72), XA/60 mV Shunt SNT60-250 250A , 60mV Shunt

15
DJ-V96T DJ-V96
DJ-V72S
DJ-V72 DV-DIN
DJ-V48

DJ-V36

DIGITAL VOLTMETER

(Phase - Neutral)

(Phase - Phase)
3 x Voltage

3 x Voltage

Panel Type

Rail Type
Product Code Description Dimensions (mm) Display

DJ-V96 Digital Voltmeter 1V - 500V AC (50/60 Hz) 96 x 96 3 x 20 mm 


DJ-V72 Digital Voltmeter 1V - 500V AC (50/60 Hz) 72 x 72 3 x 14 mm 
DJ-V48 Digital Voltmeter 1V - 500V AC (50/60 Hz) 48 x 48 3 x 9 mm 
DJ-V36 Digital Voltmeter 1V - 500V AC (50/60 Hz) 36 x 72 3 x 14 mm 
DV-DIN Digital Voltmeter 1V - 500V AC (50/60 Hz) DIN TYPE 3 x 9 mm 
DJ-V96T 3 Phase Digital Voltmeter 5V - 500V AC (50/60 Hz) 96 x 96 3 x 14 mm   
DJ-V96S Digital Selective Voltmeter 5V - 500V AC (50/60 Hz) 96 x 96 3 x 20 mm   
DJ-V72S Digital Selective Voltmeter 5V - 500V AC (50/60 Hz) 72 x 72 3 x 14 mm   

RG-96K RG-96
RG-72AK RG-72EB
RG-72K RG-72E

DIGITAL VOLTMETER (FOR REGULATORS) Over Output Voltage Protection

Low Output Voltage Protection


Regulator Output Protection

Servo Motor Control Output

Over Current Protection


Regulator Output Set

Switchless Working
Servo Motor Speed
Regulator Output
Regulator Input

Contact Output

Panel Type
Buzzer

Dimensions
Product Code Description (mm) Display
3 x 20 mm
RG-96 Digital Voltmeter (For Regulators) 1V - 300V AC (50/60 Hz) 96 x 96
3 x 14 mm   
RG-72E Digital Voltmeter (For Regulators) Economic Type 3V - 300V AC (50/60 Hz) 72 x 72 6 x 14 mm   
RG-72EB Digital Voltmeter with Buzzer (For Regulators) 3V - 300V AC (50/60 Hz) 72 x 72 6 x 14 mm    
3 x 20 mm
RG-96K Digital Voltmeter (Servo control for regulators) 1V - 300V AC (50/60 Hz) 96 x 96
3 x 14 mm           
RG-72K Digital Voltmeter (Servo control for regulators) 1V - 300V AC (50/60 Hz) 72 x 72 6 x 14 mm           
RG-72AK Digital Voltmeter (Servo and current control for regulators) 1V - 300V AC (50/60 Hz) 72 x 72 3 x 9 mm             
RG-72C Digital Voltmeter (Servo control for Regulators without switch) 1V - 300V AC (50/60 Hz) 72 x 72 6 x 14 mm            
DV-B Digital Optional Voltemer (50/60 Hz) with Buzzer 72 x 72 3 x 14 mm  

16
DJ-A96T DJ-A72D DA-VIP04
DJ-A72
DJ-A96
DJ-A72S
DJ-A48

DJ-A36

DIGITAL AMMETER

High-Low Current Protection

Automatic Reset Count


Automatic Reset Time
Demurrage Multiplier

Demurrage Time

Error Delay Time


Contact Output
Panel Type

Rail Type

CT-120

CT-300
X/5 CT
Product Code Description Dimensions (mm) Measuring Range Display

DJ-A96 Digital Ammeter, (50/60 Hz) 96 x 96 100mA - 9995A 4 x 20 mm  

DJ-A96D Digital Ammeter, (50/60 Hz) 96 x 96 1A - 100A 3 x 20 mm  

DJ-A72 Digital Ammeter, (50/60 Hz) 72 x 72 100mA - 9995A 4 x 14 mm  

DJ-A72D Digital Ammeter, (50/60 Hz) 72 x 72 1A - 100A 3 x 14 mm  

DJ-A48 Digital Ammeter, (50/60 Hz) 48 x 48 100mA - 9995A 4 x 9 mm  

DJ-A48D Digital Ammeter, (50/60 Hz) 48 x 48 1A - 100A 3 x 9 mm  

DJ-A36 Digital Ammeter, (50/60 Hz) 36 x 72 100mA - 9995A 4 x 10 mm  

DJ-A36D Digital Ammeter, (50/60 Hz) 36 x 72 1A - 100A 3 x 14 mm  

DA-120 Digital Ammeter, (50/60 Hz) DIN TYPE 1A - 100A 3 x 9 mm  

DA-300 Digital Ammeter, (50/60 Hz) DIN TYPE 2A - 250A 3 x 9 mm  

DJ-A96T Digital Three-Phase Ammeter, (50 Hz) 96 x 96 150mA - 995A 3 x 20 mm, 3 x 14 mm  

DJ-A96S Digital Ammeter With Set, (50 Hz) 96 x 96 150mA - 995A 3 x 20 mm, 3 x 14 mm         

DJ-A72S Digital Ammeter With Set, (50 Hz) 72 x 72 150mA - 995A 3 x 14 mm, 3 x 9 mm         

DA-VIP04 Digital Ammeter With Set, (50 Hz) 96 x 96 250mA - 800A 3 x 20 mm, 3 x 14 mm    

17
TRM-25 TRM-50 TRM-200 TRM-400

DIGITAL THERMAL OVERLOAD RELAYS

Contact Output (NA, NC, NO, COM)

Semi-Automatic Mode
3x3 Digit Display

Automatic Mode
Manual Mode
CT-120

CT-300
X/5 CT
Product Code Description High Current Set (A) Delay Time (sec)

TRM-03 Digital Thermal Overload Relay (Direct) 0,1A - 3.0A 0,1 sn. - 10 sec.     

TRM-12 Digital Thermal Overload Relay (Direct) 3A - 12.0A 0,1 sn. - 20 sec.     

TRM-25 Digital Thermal Overload Relay (Direct) 1A - 25.0A 0,1 sn. - 20 sec.     

TRM-30F Digital Thermal Overload with Phase Protection (Direct) 0,5A - 30A 0,1 sn. - 20 sec.     

TRM-50 Digital Thermal Overload Relay 15A - 50.0A 0,1 sn. - 20 sec.      

TRM-100 Digital Thermal Overload Relay 40A - 100A 0,1 sn. - 20 sec.      

TRM-200 Digital Thermal Overload Relay 90A - 200A 0,1 sn. - 200 sec.      

TRM-300 Digital Thermal Overload Relay 190A - 300A 0,1 sn. - 200 sec.      

TRM-400 Digital Thermal Overload Relay 290A - 400A 0,1 sn. - 200 sec.      

UNDER CURRENT CONTROL RELAY VOLTAGE PROTECTED DIGITAL OVERLOAD RELAY


DAKR-01D TRM-30F 30 A Direct
• X/5A Current Transformer Can Be Connected
• Inrush (Inrush Current) Time Adjustable Innovative Solutions In Current Control
• Under Current Fault Waiting Time Adjustable • It shows the current drawn. (O.5 - 30A)
• Under Current Set Value Adjustable • Control of phase sequence, phase absence
• Current asymmetry 50%, voltage asymmetry 30% control
• High voltage error 440V (Phase-Phase)
• Low voltage error 270V (Phase-Phase)
• Realistic measurement and response sensitivity
• It is not affected by the ambient temperature
• Savings in stock costs
• Digital current set can be adjustable (0.5 - 30A)
• Error delay time can be adjustable. (0 - 20 sec.)
• User friendly
• Easy setup
• With an internal current transformer

18
KON-TER-50 KON-TER-12 KON-TER-25

DIGITAL CONTACTOR & OVERLOAD RELAY

Current Asymmetry 50% (Fixed)

Number of contact usage


Contact Output (NC, NO)
3 x 3 Digit Display

Working Hours
Manual Mode
Error Output

Rail Type
Product Code Description Working Voltage High CurrentSet (A) Case Type Delay Time(sec)

KON-TER-12 Contactor Thermal Overload (up to 4 kW) 100-240 V AC 1A - 12.0A TYPE 1 1 sec. - 10 sec.        

KON-TER-18 Contactor Thermal Overload (up to 7,5 kW) 100-240 V AC 1A - 18.0A TYPE 1 1 sec. - 10 sec.        

KON-TER-25 Contactor Thermal Overload (up to 11 kW) 100-240 V AC 1A - 25.0A TYPE 1 1 sec. - 10 sec.        

KON-TER-50 Contactor Thermal Overload (up to 22 kW) 120-240 V AC 25A - 50.0A TYPE 2 1 sec. - 20 sec.        

DIGITAL CONTACTOR & THERMAL OVERLOAD RELAY


KON-TER Series
Innovative Design, Two in One Product

• Measurement between 1A and 12A / 18A / 25A / 50A,


intervention and silent operation
• 100-240 V AC Flexible operating voltage.
• Contactor and Digital thermal two products in one
• Realistic measurement and intervention sensitivity
• Complete solution for current protection of sensitive devices
• Stock and cost savings
• Manual operating mode (Manual Reset)
• Digital current set
• Digital error delay time (1 - 20 sec)
• Monitoring instant currents
• Monitoring the number of contact usage
• Monitoring working time
• Auxiliary contacts
• Error Output Contact
• 3 digits 3 segments display screen
• Informing with status LEDs
• Easy to use and easy to install
• With an internal current transformer
• 50% Current Asymmetry

19
EB-185

CONTACTOR COIL SUPPLY


Product Code Description Working Voltage Case Type

EB-185 3 Pole Electronic Contactor Coil Supply (150-185-225 A) 100-240 V AC DIN

DRV-10

DRV-10
DIGITAL TIMER WITH ON/OFF DELAY
• 0.1 sec. - 99 minutes time setting range
• On delay and release delay option
• External triggering input
• 220V AC - 24V AC / DC two separate supply inputs
• 2x7 mm display screen
• 1x Relay output

DRV-10 ERX-10

MULTIFUNCTIONAL TIME RELAYS


24V AC DC

Rail Type

Package
220V AC

Quantity

Product Code Description Dimensions (mm) Time Range

ERX-10 Multifunctional Time Relay (12-240 V AC / DC) V-AUTOMAT DIN 2 0,1 sec.-30 hours    20

DRV-10 Multifunctional Time Relay (220/24V AC) V-AUTOMAT DIN 0,1 sec.-99 minutes    20

20
ERD-96 ERD-96M ERD-72M
ERD-72 ERD-48
ERD-48T ERD-48M

DIGITAL TIMERS

24VDC input (Proximity switch connection)


START input (100… 240VAC)

RESET input (max 32VDC)


START input (max 32VDC)

GATE input (max 32VDC)


With Trigger 24V, 240V
Start with supply

Reserve Feature
SS out output
Out 1 output
Out 2 output
Panel Type
Dimensions
Product Code Description (mm) Selectable Output Function Indicator Display
Digital Timers
ERD-48T 24V AC/DC
220V AC
48 x 48 On Delay - Off Delay 3 Dijit 7 Segment   

ERD-48 Digital Timers 48 x 48 START ON with instant contact and delay or Flasher 3 Digits 7 Segment   

ERD-72 Digital Timers 72 x 72 Instant contact and delay with power ON or Flasher 3 Digits 7 Segment  

ERD-96 Digital Timers 96 x 96 Instant contact with power ON and delay or flasher 3 Digits 7 Segment  

ERD-48M Digital Timers 48 x 48 13 different operating modes 2x4 Digits 7 Segment   

ERD-72M Digital Timers 72 x 72 8 different operating modes 2x4 Digits 7 Segment  

ERD-96M Digital Timers 96 x 96 8 different operating modes 2x4 Digits 7 Segment    

ERD-48K Digital Timers 48 x 48 Instant contact with Supply ON and Flasher 3 Digits 7 Segment  

NEW HM-48 NEW HM-48D SF-48 DHM-DIN

DHM-48

DIGITAL HOUR METER


Product Code Description

DHM-48 Digital Hour Meter (maximum 99.999 hours), 6 digits 9 mm display, with reserve, resetable (48 x 48), panel type

Digital Hour Meter (maximum 99.999 hours), 5 digits 9 mm, 2 digits 8 mm display, with reserve, (48 x 48), panel type,
HM-48 NEW
24V AC/DC, 220V AC

Digital Hour Meter (maximum 99.999 hours), 5 digits 9 mm, 2 digits 8 mm display, with reserve resetable, (48 x 48), panel type,
HM-48D NEW 24V AC/DC, 220V AC

DHM-DIN Digital Hour Meter clock (maximum 99.999 hours), 6 digits 9 mm display, with reserve, resetable (DIN BOX), rail type

SF-48 Analog Hour Meter (maximum 999.999.9 hours), 7 digits 220 V Panel Type 48x48

21
ER-30 ERV-30 ERV-08
ERS-30Y
ERP-30Y

TIMERS

24V AC/DC

Panel Type

Rail Type

Package
220V AC

Quantity
Product Code Description Dimensions (mm) Time Period

ER-30 Timers CLASSIC BOX 0,1 - 30 sec.   10

ER-60 Timers CLASSIC BOX 0,1 - 60 sec.   10

ER-03D Timers CLASSIC BOX 0,1-3 min.   10

ER-12D Timers CLASSIC BOX 0,1-12 min.   10

ER-30D Timers CLASSIC BOX 0,1-30 min.   10

ER-60D Timers CLASSIC BOX 0-1-60 min.   10

ERV-08 Multifunctional Timers V-AUTOMAT DIN 1 sec.-100 hours    20

ERV-08M Multifunctional Timers (Operating Voltage 12V-240V AC/DC) V-AUTOMAT DIN 1 sn-100 hours  20

ERV-03 Timers V-AUTOMAT DIN 0,1 - 3 sec.    20

ERV-12 Timers V-AUTOMAT DIN 0,1 - 12 sec.    20

ERV-30 Timers V-AUTOMAT DIN 0,1 - 30 sec.    20

ERV-60 Timers V-AUTOMAT DIN 0,1 - 60 sec.    20

ERV-03D Timers V-AUTOMAT DIN 0,1 - 3 min.    20

ERV-12D Timers V-AUTOMAT DIN 0,1 - 12 min.    20

ERV-30D Timers V-AUTOMAT DIN 0,1 - 30 min.    20

ERV-60D Timers V-AUTOMAT DIN 0,1 - 60 min.    20

ERS-03Y Timers 48 x 48 (8 Pin Socket) 0,1 - 3 sec.  


ERS-12Y Timers 48 x 48 (8 Pin Socket) 0,1 - 12 sec.  
ERS-30Y Timers 48 x 48 (8 Pin Socket) 0,1 - 30 sec.  
ERS-60Y Timers 48 x 48 (8 Pin Socket) 0,1 - 60 sec.  
ERS-03DY Timers 48 x 48 (8 Pin Socket) 0,1 - 3 min.  
ERS-12DY Timers 48 x 48 (8 Pin Socket) 0,1 - 12 min.  
ERS-30DY Timers 48 x 48 (8 Pin Socket) 0,1 - 30 min.  
ERS-60DY Timers 48 x 48 (8 Pin Socket) 0,1 - 60 min.  
ERP-03Y Timers 48 x 48 (Plug-in Terminal) 0,1 - 3 sec.  
ERP-12Y Timers 48 x 48 (Plug-in Terminal) 0,1 - 12 sec.  
ERP-30Y Timers 48 x 48 (Plug-in Terminal) 0,1 - 30 sec.  
ERP-60Y Timers 48 x 48 (Plug-in Terminal) 0,1 - 60 sec.  
ERP-03DY Timers 48 x 48 (Plug-in Terminal) 0,1 - 3 min.  
ERP-12DY Timers 48 x 48 (Plug-in Terminal) 0,1 - 12 min.  
ERP-30DY Timers 48 x 48 (Plug-in Terminal) 0,1 - 30 min.  
ERP-60DY Timers 48 x 48 (Plug-in Terminal) 0,1 - 60 min.  

22
ERS-07 ERV-YU ERV-ST TBM-50 ER-DG

COMMAND & CONTROL RELAYS


Package
Product Code Description
Quantity

Multi Functional Double Adjustable Right Left Relay (150-260 V AC) ON (Right-Left)
ERS-07 Time Interval: 1 sec. - 100 minutes / OFF (Intermediate Waiting) Time Range: 1 sec. - 100 minutes
20

ERV-YU Star Delta Relay, V-Automat Type, 220V AC (50-60 Hz.), Star: 1sec. - 30 sec., Pass: 10 ms. - 500 msec. 20

ERV-ST Start Stop Relay, Classic Box, 220V AC (50-60 Hz.) 20

ER-DG Delay-On Time Relay, Classic Box, 220V AC (50-60 Hz.), 0.1 sec. - 6 sec. 10

TBM-50 Dishwasher Relay, 5-Stage washing, 01 sec - 30 sec. rinsing, Industrial purpose, Classic Box, 220V AC (50-60 Hz.) 10

DFR-72 ERF-09 ERV-09

ERP-2F

FLASHER RELAYS

24V AC/DC

Panel Type

Package
Rail Type

Quantity
220V AC
Product Code Description Dimensions (mm) ON Time Range OFF Time Range

DFR-72 Digital Multifunction Flasher Relay 72x72 Panel Mounting 1 sn-99 min. 1 sn-99 min.  
ERF-09 Multifunction Flasher Relay Classic Box 1 sn-100 hours 1 sn-100 hours   10

ERV-09 Multifunction Flasher Relay V-Automat DIN 1 sn-100 hours 1 sn-100 hours    20

ERP-2F Flasher Relay 48x48 Panel Mounting 0,1 - 60 min. 0,1 - 60 min.  

WL9 PT 10K WL9 PT 5K


HF-41F

POTENTIOMETER
22 MM (SINGLE TOUR) RELAY + SOCKET
Product Code Description

Product Code Description


WL9 PT 5K 5K 22 mm Plastic Potentiometer

WL9 PT 10K 10K 22 mm Plastic Potentiometer HF-41F 6A Relay + Socket Screw Set. (1NO) 24V DC

PTM-01 PTM-02

DIGITAL OUTPUT
DIGITAL POTANTIOMETER PTM-01 0-10V A Digital Potentiometer with Analogue Output PTM-02 4-20mA Digital Potentiometer with Analogue Output
CODE AÇIKLAMA
• Microprocessor based digital potentiometer • Microprocessor based digital potentiometer
• 0-10V analog output • 4-20mA analog output
• Analogue output control possibility with external digital inputs • Analogue output control possibility with external digital inputs
PTM-01 0-10V analogue output • Ramp function • Ramp function
• Possibility of lower and upper limit adjustment • Possibility of lower and upper limit adjustment
(for Scale and Set values) (for Scale and Set values)
PTM-02 4-20mA analogue output
• SET value setting limitation (Unauthorized use • SET value setting limitation (Unauthorized use
The set feature can be turned off to prevent it) The set feature can be turned off to prevent it)

23
SSR-05 VSR-05 SSR-05D SSR-09 SSR-19

LIQUID LEVEL RELAYS

3 x 380V AC (50 Hz) + Neutral

Delay for Upper Electrode


220V AC (50/60 Hz)

High - Low Voltage


< 100k Ω Setting

Package Quantity
Fixed Asymmetry
Phase Sequence
< 50k Ω Fixed
Product Code Description Dimensions (mm)

SSR-05 Liquid Level Relay CLASSIC BOX   10

SSR-05D Liquid Level Relay (With microprocessor) CLASSIC BOX    12

VSR-05 Liquid Level Relay V-AUTOMAT   20

VSR-05-24 Liquid Level Relay with 24V Supply V-AUTOMAT      10

SSR-09 Liquid Level Relay for Steam Iron Boilers (Without Tank) CLASSIC BOX   10

SSR-19 Liquid Level Relay for Steam Iron Boilers (With Tank) CLASSIC BOX   10

SSE-10
SSE-10 Liquid Level Electrode (Stainless)
FLT SERIES
FLT-1.6 Cable Floater, 1.6 meters, 8A 250V AC (50/60 Hz), IP68

FLT-3 Cable Floater, 3 meters, 8A 250V AC (50/60 Hz), IP68

FLT-5 Cable Floater, 5 meters, 8A 250V AC (50/60 Hz), IP68

FLT-10 Cable Floater, 10 meters, 8A 250V AC (50/60 Hz), IP68

HSR-S HSR-02 HSR-03

HYDROPHORE SEQUENCING RELAYS


2 Pressure Switch Input

3 Pressure Switch Input

2 Booster Outputs

3 Booster Outputs

Package Quantity
Rail Type
Thermal

Product Code Description Dimensions (mm)

HSR-02 Hydrophore Sequencing Relay V-AUTOMAT DIN TYPE    20

HSR-03 Hydrophore Sequencing Relay DIN TYPE    15

HSR-S Hydrophore Sequencing Relay (with Adjustable Co-Aging) DIN TYPE    

FTV-04 FT-GR FT-G

PHOTOCELL RELAYS
Product Code Description

FTV-04 Photocell Relay, V-Automat DIN Body, 1 - 10 Lux adjustable, 5A / 250V AC relay output

FT-GR Photocell Relay, 10 Lux fixed, 7A / 250V AC relay output

FT-G Photocell Eye, (5 mm LDR)

24
TDK-01 TDK-02

MDK-02 MDK-03 TDK-30


NEW TDK-96

SUBMERSIBLE PUMP CONTROL RELAY

Three-Phase (Three Current Transformers)


Single-Phase (Single Open Transformer)

High - Low Current ProtectionKoruma

Asymmetry Voltage Protection


High - Low Voltage Protection

High - Low Cos ϕ Protection

Delay for Upper Electrode

Semi-Automatic Reset
Demurrage Multiplier

Error Count Records


3 x Electrode Inputs

Demurrage Time
Phase Sequence

Automatic Reset
Manual Reset
Floater Input

250 A Direct
30 A Direct
CT-120

CT-300
Dimensions
Product Code Description (mm)

MDK-02 Single-Phase Submersible Control Relay 96 x 96            


Single-Phase Submersible Control Relay
MDK-03 With Digital Contactor (1-30 A Direct Operation) (150-270 V AC)
DIN TYPE            

TDK-01 Three-Phase Submersible Control Relay (Without Neutral) 144 x 144                

TDK-02 Three-Phase Submersible Control Relay (Without Neutral) 144 x 144                


Three-Phase Submersible Control Relay With Digital
TDK-30 Contactor (Direct up to 5.5kW Operation) (150-270 V AC)
DIN TYPE                
TDK-96 Three-Phase Submersible Control Relay (Without Neutral) 96 x 96                

NEW

MDK-03 30 A Direct

• 2x3 digits 9mm led display


• Adjustable high and low current
• Adjustable high and low voltage
• Adjustable upper electrode delay time
• Manual, semi-automatic and automatic resetting
• Monitoring 1x phase voltage TDK-96 250 A TDK-01 120 A TDK-02 300 A
• Monitoring 1x phase current • 128x64 LCD display • 4x20 LCD display
• Extends electrode life
• Use with 2 or 3 electrodes • Easy to use menu • Easy to use menu
• Stock and cost savings • Adjustable high and low cosine set • Adjustable high and low cosine set
• Adjustable high and low current, • Adjustable high and low current,
TDK-30 Direct Up To 5.5 kW • Adjustable high, low and asymmetry voltage
• Adjustable asymmetry voltage,
• Adjustable high, low and asymmetry voltage
• Adjustable asymmetry voltage,
• 3x3 digits 9mm led display • Adjustable the upper electrode delay time, • Adjustable the upper electrode delay time,
• Adjustable high and low current adjustment
• Adjustable high and low voltage • Adjustable liquid sensitivity, • Adjustable liquid sensitivity,
• Adjustable current and voltage asymmetry • Keeping error records into memory, • Keeping error records into memory,
• Adjustable upper electrode delay time • Star-Delta contact output, • Star-Delta contact output,
• Manual, semi-automatic and automatic resetting • Flasher mode, • Flasher mode,
• Displays 3 phase voltage
• Displays 3 phase current • Start / Stop memory, • Start / Stop memory,
• Adjustable liquid sensitivity • Notifies the engine maintenance time, • Notifies the engine maintenance time,
• Extends electrode life • Manual, automatic and semi-automatic reset • Manual, automatic and semi-automatic reset
• Err (no) fault contact
• Phase sequence check • External Start Stop input • External Start Stop input
• Use with 2 or 3 electrodes • Adjustable 2x alarm outputs • Adjustable 2x alarm outputs
• Indicates the number of contact releases • 50Hz and 60Hz operating frequency selection • 50Hz and 60Hz operating frequency selection
• Displays engine run time
25
GK-04S DGK-01 DGK-04 DGK-04F DGK-04PF GKV-12 GKM-11 GKT-03 GKT-03F GKM-02 GKM-02F

VOLTAGE CONTROL RELAYS

Low Voltage Protection (Fixed)


High Voltage Protection

Low Voltage Protection

9 Digits 9 mm Display
Underfeed Protection
Over Voltage Fuse

Low Voltage Fuse

Package Quantity
Reset Delay Time

Error Delay Time


Phase sequence
Without neutral

Phase Absence

Rail Type
Neutral

PTC
Product Code Description Dimensions (mm)

GK-03 Three-Phase Overvoltage Control Relay CLASSIC BOX       10

GK-04 Three-Phase Over-Low Voltage Control Relay CLASSIC BOX       10

GK-04S Three-Phase Over-Low Voltage Control Relay CLASSIC BOX        10

GKM-11 Single-Phase Over-Low Voltage Control Relay DIN TYPE        12

GKV-12 Three-Phase Over-Low Voltage Control Relay Single-Phase Dial V-AUTOMAT DIN           20

GKM-02 Three-Phase Over-Low Voltage Control Relay Single-Phase Dial DIN TYPE           12

GKM-02F Three-Phase Over-Low Voltage Control Relay Single-Phase Dial DIN TYPE            12

GKT-03 Three-Phase Over-Low Voltage Control Relay Three-Phase Dial DIN TYPE           12

GKT-03F Three-Phase Over-Low Voltage Control Relay Three-Phase Dial DIN TYPE            12

DGK-01 Single-Phase Digital Over-Low Voltage Control Relay DIN TYPE        12

DGK-04 Three-Phase Digital Over-Low Voltage Control Relay CLASSIC BOX        10

DGK-04F Three-Phase Digital Over-Low Voltage Control Relay CLASSIC BOX         10

DGK-04PF Three-Phase Digital Over-Low Voltage Control Relay CLASSIC BOX          10

GKE-40 Mono-Phase High-Low Voltage Protection Relay DIN TYPE      

GKE-40
MONO-PHASE HIGH-LOW VOLTAGE PROTECTION RELAY
• Easy setup
• 3 digit display led
• Direct single-phase connection
• High/Low voltage protection
• Adjustable error delay time 0.1-600 sec.
• Error state led
• Adjustable over voltage 230-300 V
• Adjustable under voltage 120-210 V
• Maximum 40 A load

26
FK-05 FK-04 FK-01 FKT-06 FKT-06PF

FKV-24F FKV-03N FKV-03 FKV-14P FKV-14 FKV-11 FK-14 FK-14P FKM-05F

PHASE PROTECTION RELAYS

Asymmetry Protection ~ 30% (Fixed)

Asymmetry Protection ~ 40% (Fixed)


Asymmetry Protection (5% -25%)
High - Low Voltage Protection

Package Quantity
Reset Delay Time
Phase Sequence

Error Delay Time


Phase Absence

Rail Type
PTC
Product Code Description Dimensions (mm)

FK-01 Phase Protection Relay CLASSIC BOX    10

FK-02 Phase Protection Relay CLASSIC BOX    10

FK-04 Phase Protection Relay CLASSIC BOX      10

FK-05F Phase Protection Relay Without Neutral CLASSIC BOX      10

FKM-05 Phase Protection Relay %5 - %25 DIN TYPE      12

FKM-05F Phase Protection Relay %5 - %25 DIN TYPE       12

FKT-06 Phase Protection Relay %5 - %25 Without Neutral DIN TYPE      12

FKT-06PF Phase Protection Relay %5 - %25 Without Neutral DIN TYPE        12

FKV-03 Phase Protection Relay V-AUTOMAT     20

FK-14 Phase Protection Relay DIN TYPE      12

FK-14P Phase Protection Relay DIN TYPE       12

FKV-11 Phase Protection Relay V-AUTOMAT DIN    20

FKV-14 Phase Protection Relay V-AUTOMAT DIN      20

FKV-14P Phase Protection Relay V-AUTOMAT DIN       20

FKV-03N Phase Protection Relay Without Neutral V-AUTOMAT DIN    20

FKV-24F Phase Protection Relay Without Neutral V-AUTOMAT DIN     20

DIGITAL PHASE PROTECTION RELAYS


FKD-01F DFK-05F
Asymmetry Protection (20% Fixed)

Asymmetry Protection (5% -25%)


High - Low Voltage Protection

9 Digits 9 mm Display

Package Quantity
Phase Sequence

Rail Type
PTC

Product Code Description Dimensions (mm)

FKD-01F Digital Phase Protection Relay Without Neutral CLASSIC BOX      10

DFK-05F Digital Phase Protection Relay Without Neutral CLASSIC BOX      10

27
DT-96 DT-96E
DT-D AD-96
DT-321DIN

HT-310 DT-322 DT-Y


DT-36E

TEMPERATURE CONTROL DEVICES

Alarm Contact Output

Password Protection

Optional SSR Output


Upper Limit Setting
Set Contact Output

Lover Limit Setting


P,PI,PD,PID Control

Hysteresis Setting

Package Quantity
On/Off Control

Offset Feature

SSR Output
Panel Type

Auto-tune
Dimensions Thermocouple
Product Code Description (mm) Input Type Display

DT-48 Temperature Controller 48 x 48 J,K,S,R,T,Pt100 2x4 Digit 7 Segment            


DT-48 EM Temperature Controller 48 x 48 J,K,S,R,T,Pt100 2x4 Digit 7 Segment           
DT-72 EM Temperature Controller 72 x 72 J,K,S,R,T,Pt100 2x4 Digit 7 Segment           
DT-72 Temperature Controller 72 x 72 J,K,S,R,T,Pt100 2x4 Digit 7 Segment            
DT-96 Temperature Controller 96 x 96 J,K,S,R,T,Pt100 2x4 Digit 7 Segment            
DT-48Y Temperature Controller 48 x 48 J,K,S,R,T,Pt100 2x4 Digit 7 Segment            
DT-72Y Temperature Controller 72 x 72 J,K,S,R,T,Pt100 2x4 Digit 7 Segment            
DT-D Temperature Controller 96 x 48 J,K,S,R,T,Pt100 2x4 Digit 7 Segment            
DT-Y Temperature Controller 48 x 96 J,K,S,R,T,Pt100 2x4 Digit 7 Segment            

DTZ-48 Temperature Controller with Internal Time Relay 48 x 48 J,K,S,R,T,Pt100 2x4 Digit 7 Segment            
DTZ-72 Temperature Controller with Internal Time Relay 72 x 72 J,K,S,R,T,Pt100 2x4 Digit 7 Segment            
DTZ-96 Temperature Controller with Internal Time Relay 96 x 96 J,K,S,R,T,Pt100 2x4 Digit 7 Segment            

DT-36E Temperature Controller 36 x 72 J (Fe-Const) 3 Digit 7 Segment     


DT-48E Temperature Controller 48 x 48 J (Fe-Const) 3 Digit 7 Segment     
DT-72E Temperature Controller 72 x 72 J (Fe-Const) 3 Digit 7 Segment     
DT-96E Temperature Controller 96 x 96 J (Fe-Const) 3 Digit 7 Segment     
NTC-105, NTC-
DT-321 Temperature Controller (-30 to +150 °C) 36 x 72
150, NTC-S-150
3 Digit 7 Segment         
NTC-105, NTC-
DT-322 Temperature Controller (-19.9 to +99.9 °C) 36 x 72
150, NTC-S-150
3 Digit 7 Segment         
NTC-105, NTC-
DT-321DIN Temperature Controller (-30 to +150 °C) DIN TYPE
150, NTC-S-150
3 Digit 7 Segment         10

Temperature Controller with Analog Adjustment


AD-96 and Digital Display
96 x 96 J (Fe-Const) 3 Digit 7 Segment    
HT-310 Digital Temperature and Humidity Controller 36 x 72 3 Digit 7 Segment         

28
THERMOCOUPLES
Product Code Description ( 0 - 600 ºC )
Product Code Description

NT-310 Humidity And Temperature Probe TK-1 1 mt. J Type Fe-const Thermocouple (Metric 6/8)

NTC-105 Temperature Probe TK-1,5 1,5 mt. J Type Fe-const Thermocouple (Metric 6/8)

NTC-150 Temperature Probe TK-2 2 mt. J Type Fe-const Thermocouple (Metric 6/8)

NTC-S-150 Temperature Probe TK-2,5 2,5 mt. J Type Fe-const Thermocouple (Metric 6/8)

TK-3 3 mt. J Type Fe-const Thermocouple (Metric 6/8)


AIR PROBE
NT-310
TK-4 4 mt. J Type Fe-const Thermocouple (Metric 6/8) TK SERIES

TK-5 5 mt. J Type Fe-const Thermocouple (Metric 6/8)

PT-1 1 mt. PT-100 Thermocouple (Metric 6/8)

PT-2 2 mt. PT-100 Thermocouple (Metric 6/8)

PT-3 3 mt. PT-100 Thermocouple (Metric 6/8)

SOLID STATE RELAYS (SSR)

Product Code Current Type Input Output

1SS-25-1 25A SINGLE-PHASE 3-32 VDC 24-380 VAC

1SS-40-1 40A SINGLE-PHASE 3-32 VDC 24-380 VAC

1SS-50-1 50A SINGLE-PHASE 3-32 VDC 24-380 VAC

1SS-75-1 75A SINGLE-PHASE 3-32 VDC 24-380 VAC

1SS-120-1 120A SINGLE-PHASE 3-32 VDC 24-380 VAC

3SS-25-1 25A THREE-PHASE 3-32 VDC 24-380 VAC

RAIL MOUNTED COOLERS


Product Codel Current

ISS-M-25A Rail Mounted Single-Phase Cooler for 25A SSR

ISS-M-40A Rail Mounted Single-Phase Cooler for 40A SSR

ISS-M-75A Rail Mounted Single-Phase Cooler for 75A SSR

ISS-T-25A Rail Mounted Three-Phase Cooler for 25A SSR

RAIL MOUNTED SSR WITH COOLER

Product Code Current Type Input Output

IG3PA-4825D 25A SINGLE-PHASE 3-32 VDC 24-380 VAC

IG3PA-4840D 40A SINGLE-PHASE 3-32 VDC 24-380 VAC

29
DT-48EM / DT-72EM
DIGITAL TEMPERATURE CONTROLLER
• Microprocessor based, temperature control device
• Temperature measurement scale from 0 C ° to +1700 C °
• Working with J, K, Pt100, R, S, T Type Thermocouples
• Advanced PID feature
• Suitable for hot runners
• AUTO-TUNE feature
• ON-OFF operation feature
• Soft Start (Ramp) feature
• Decimal measurement scale
• 1x Relay, 1x SSR Output
• Possibility to adjust upper / lower limit, hysteresis and offset for set values
• High sensitivity and accuracy
• Keeping program and control parameters continuously in memory
• Easy connection with plug-in terminal blocks
• Password protected

DS-72A DS-72
DS-48

COUNTERS
Product Code Description

72x72 sizes, double SET, double output, CP1, CP2, RESET input, dry contact, proximity and enCoder input (NPN / PNP / Totem Pole),
DS-72A Double display, 6 digits, multiplier value can be entered, with reserve, SSR output, forward-backward counter

72x72 sizes, double SET, double output, CP1, CP2, RESET input, dry contact, proximity and enCoder input (NPN / PNP / Totem Pole),
DS-72 Double display, 6 digits, multiplier value can be entered, with reserve, SSR output, forward-backward counter

48x48 sizes, double SET, double output, CP1, CP2, RESET input, dry contact, proximity and enCoder input (NPN / PNP / Totem Pole),
DS-48 Double display, 6 digits, multiplier value can be entered, with reserve, SSR output, forward-backward counter

PERMANENT CIRCUIT CAPACITORS INITIAL MOVEMENT CAPACITORS


Capacity Package Quantity Capacity Package Quantity

3 10 124-149 10
4 10 130-156 10
5 10 145-175 10
6 10 161-193 10
7 10 189-227 10
8 10 216-259 10
10 10 233-280 10
12 10 280-333 10
12,5 10
15 10
20 10
25 10
30 10
35 10
40 10
45 10
50 10
60 10
80 10
100 10

30
A

SINGLE-PHASE SHUNT REACTORS


(INDUCTIVE LOAD REACTORS) B C

Thermal Protection

Inductance (mH)

Weight (kg)
Sheet Type

Current (A)
B (mm)

C (mm)
A (mm)
Power (kVAr)
Product Code Description 230V AC

TNS-0,5 Shunt Reactors 0,5  E-I 120 120 77 338 2,17 3,1

TNS-1 Shunt Reactors 1,0  E-I 145 150 100 169 4,35 6,3

TNS-1K Shunt Reactor With Step 0,25-0,5-0,75-1,0  E-I 145 120 100 7

TNS-1,5 Shunt Reactors 1,5  E-I 145 150 120 113 6,52 9,2

TNS-1,66S Shunt Reactors 1,66  E-I 145 150 120 103 6,82 10

TNS-2,5 Shunt Reactors 2,5  E-I 185 192 120 67,6 10,87 12,5

TNS-3 Shunt Reactors 3  E-I 185 192 145 56,3 13,04 17,5

TNS-3,33S Shunt Reactors 3,33  E-I 185 192 145 50,5 14,40 22,5

TNS-5 Shunt Reactors 5,0  E-I 185 192 210 33,8 21,74 30,5

TNS-6,67S Shunt Reactors 6,67  U-I 240 180 300 28,5 30,0 26,0

TNS-7.5 Shunt Reactors 7,5  U-I 240 180 360 22,5 32,61 29,2

TNS-10S Shunt Reactors 10  U-I 240 180 360 16,9 43,48 37,6

THREE-PHASE SHUNT REACTORS


(INDUCTIVE LOAD REACTORS) B C
Thermal Protection

Inductance (mH)

Weight (kg)
Sheet Type

Current (A)

Power
B (mm)

C (mm)
A (mm)

(kVAr)
Product Code Description 400V AC

TNS-0,5/400V Shunt Reactors 0,5  TİP1 145 150 84 1020 0,72 3

TNS-1/400V Shunt Reactors 1  TİP1 152 180 80 505 1,44 7,8

TNS-1,5/400V Shunt Reactors 1,5  TİP1 152 180 100 336 2,17 9,5

TNS-2,5/400V Shunt Reactors 2,5  TİP1 225 240 100 202 3,61 11,9

TNS-3 /400V Shunt Reactors 3  TİP1 225 240 110 170 4,33 16,7

TNS-5/400V Shunt Reactors 5  TİP1 275 300 146 101 7,22 30,5

TNS-7,5/400V Shunt Reactors 7,5  TİP1 315 300 156 68 10,83 32

TNS-10/400V Shunt Reactors 10  TİP1 360 360 166 51 14,43 44

TNS-15/400V Shunt Reactors 15  TİP2 350 420 176 34 21,65 63

TNS-20/400V Shunt Reactors 20  TİP2 350 420 196 25,5 28,87 81

TNS-25/400V Shunt Reactors 25  TİP2 405 480 216 20,4 36,09 102

TNS-30/400V Shunt Reactors 30  TİP2 405 480 236 16,8 43,30 125

TNS-40/400V Shunt Reactors 40  TİP2 405 480 256 12,63 57,80 141

TNS-50/400V Shunt Reactors 50  TİP2 510 600 270 10,2 72,20 180

31
SINGLE-PHASE HARMONIC FILTER REACTORS
SINGLE-PHASE HARMONIC REACTORS RESONANCE FR 189Hz P:% 7 RATED VOLTAGE 230V

Inductance

I rms (A)

I lin (A)
B (mm)

C (mm)
A (mm)

Weight
(mH)

kg
Product Code Power

HRM-0.40-07 0.40 kVAr 89 75 57 34,8 1,91 3,33 0,90

HRM-0.55-07 0.55 kVAr 89 75 66 25,3 2,63 4,59 1,20

HRM-0.83-07 0.83 kVAr 87 85 64 17,4 3,83 6,67 1,30

HRM-1-07 1 kVAr 87 85 64 13,9 4,78 8,32 1,35

HRM-1.50-07 1.50 kVAr 87 85 78 9,28 7,17 12,50 1,85

HRM-2-07 2 kVAr 87 85 89 6,96 9,57 16,70 2,00

HRM-2.50-07 2.50 kVAr 88 95 82 5,57 12,00 20,90 2,50

HRM-3-07 3 kVAr 88 95 86 4,64 14,30 25,00 2,70

HRM-4-07 4 kVAr 109 110 100 3,48 19,10 33,30 3,85


A
HRM-5-07 5 kVAr 120 120 100 2,78 23,90 41,60 4,60

HRM-7.50-07 7.50 kVAr 145 150 120 1,85 35,90 62,50 8,00 ¨
B C
HRM-10-07 10 kVAr 145 150 130 1,39 47,80 83,20 9,30

THREE-PHASE HARMONIC FILTER REACTORS


THREE-PHASE HARMONIC REACTORS RESONANCE FR 189Hz P: 7% RATED VOLTAGE 400V
Inductance
Sheet Type

Weight kg
I rms (A)

I lin (A)
(mH)

Product Code Power


B

C
A

HRT-0.50-07 0.50 kVAr TİP1 120 120 63 76,80 0,79 1,03 1,4

HRT-1-07 1 kVAr TİP1 120 120 63 38,40 1,59 2,07 1,45

HRT-1.50-07 1.50 kVAr TİP1 120 120 63 25,60 2,38 3,09 1,52

HRT-2.50-07 2.50 kVAr TİP1 120 120 74 15,36 3,97 5,16 2,2

HRT-5-07 5 kVAr TİP1 145 150 74 7,68 7,94 10,32 3,52

HRT-6.25-07 6.25 kVAr TİP1 145 150 84 6,14 9,92 12,90 4,4

HRT-7.50-07 7.50 kVAr TİP1 145 150 84 5,12 11,91 15,48 4,54

HRT-10-07 10 kVAr TİP1 175 180 84 3,84 15,88 20,64 5,7

HRT-12.50-07 12.50 kVAr TİP1 175 180 84 3,07 19,85 25,81 5,8

HRT-15-07 15 kVAr TİP1 175 180 104 2,56 23,82 30,97 6,3

HRT-20-07 20 kVAr TİP2 200 240 100 1,92 31,76 41,29 11,25

HRT-25-07 25 kVAr TİP2 200 240 100 1,54 39,69 51,60 11,5

HRT-30-07 30 kVAr TİP2 200 240 110 1,28 47,63 61,92 14,25

HRT-40-07 40 kVAr TİP2 200 240 120 0,96 65,51 85,16 17,1

HRT-50-07 50 kVAr TİP2 250 300 126 0,77 79,39 103,21 23

A
HRT-60-07 60 kVAr TİP2 250 300 146 0,64 95,27 123,85 31,5

HRT-75-07 75 kVAr TİP2 250 300 146 0,51 119,08 154,80 33,5

HRT-80-07 80 kVAr TİP2 300 360 156 0,48 127,02 165,13 40,5
B C

HRT-100-07 100 kVAr TİP2 300 360 156 0,38 158,78 206,41 45

32
ANALOG AMMETERS AND VOLTMETERS

A96-100 A72-150
V72-500

DIRECT ANALOG AMMETERS ANALOG AMMETERS


Dimensions Dimensions
Product Code Description (mm) Product Code Description (mm)

A72-05 D 5A Direct Ammeter 72x72 A72-100 100/5 Ammeter 72x72

A72-10 D 10A Direct Ammeter 72x72 A72-150 150/5 Ammeter 72x72

A72-15 D 15A Direct Ammeter 72x72 A72-200 200/5 Ammeter 72x72

A72-20 D 20A Direct Ammeter 72x72 A72-250 250/5 Ammeter 72x72

A72-25 D 25A Direct Ammeter 72x72 A72-300 300/5 Ammeter 72x72

A72-30 D 30 A Direct Ammeter 72x72 A72-400 400/5 Ammeter 72x72

A72-40 D 40A Direct Ammeter 72x72 A72-600 600/5 Ammeter 72x72

A72-50 D 50A Direct Ammeter 72x72 A72-800 800/5 Ammeter 72x72

A72-60 D 60A Direct Ammeter 72x72 A72-1000 1000/5 Ammeter 72x72

A72-75 D 75A Direct Ammeter 72x72 A72-1200 1200/5 Ammeter 72x72

A72-100 D 100A Direct Ammeter 72x72 A96-50 50/5 Ammeter 96x96

A96-30 D 30A Direct Ammeter 96x96 A96-100 100/5 Ammeter 96x96

A96-50 D 50A Direct Ammeter 96x96 A96-150 150/5 Ammeter 96x96

A96-60 D 60A Direct Ammeter 96x96 A96-200 200/5 Ammeter 96x96

A96-75 D 75A Direct Ammeter 96x96 A96-250 250/5 Ammeter 96x96

A96-100 D 100A Direct Ammeter 96x96 A96-300 300/5 Ammeter 96x96

A96-400 400/5 Ammeter 96x96

ANALOG VOLTMETERS A96-600 600/5 Ammeter 96x96


Dimensions
Product Code Description (mm)
A96-800 800/5 Ammeter 96x96
V72-250 0..250V AC Voltmeters 72x72
A96-1000 1000/5 Ammeter 96x96
V72-500 0..500V AC Voltmeters 72x72
A96-1200 1200/5 Ammeter 96x96
V96-250 0..250V AC Voltmeters 96x96
A96-1600 1600/5 Ammeter 96x96
V96-500 0..500V AC Voltmeters 96x96
A96-2000 2000/5 Ammeter 96x96

A96-2500 2500/5 Ammeter 96x96

33
We provide products and technical support to more than 50 countries.

Customer Support Technical Support


export@tense.com.tr support@tense.com.tr

tenseelektronik

34
RGM-12S
Reactive Power Control Relay
The RGM-12S Reactive Power Control Relay was designed in order to minimize the
inductive power flowing from the network that is not used by the system.

• 7 Different Compensation Programs • Active Power, Reactive Power and Apparent Power Values Can be Monitored
• Manual Compensation Option • Up to the 15th harmonic THD-I Can Be Monitored
• Easy to Install and Use with 20mm. 4 Digit Led Display • Up to the 15th harmonic THD-V Can Be Monitored
• Can Only Compensate Inductive Systems • Cosine Value Can Be Monitored
• Automatic Step Measurement • Power Factor Value Can Be Monitored
• Step Drive, Release and Discharge Times are Adjustable • Capacitive/Active and Inductive/Active Ratios Can Be Monitored
• Voltage and Current Harmonic Alarm Values Adjustable • Automatic Fan Output
• Over and Under Compensation Alarm Values Can Be Set • Step Values Can Be Monitored
• Voltage, Harmonic Voltage/Current, Over and Under Compensation Alarm Output • Same Aging in Steps (In Certain Compensation Programs)
• Voltage, Current and Frequency Values Can Be Monitored

35
Web Energy Tracking
www.tense.com.tr www.tenseenerji.com

You might also like