Nippon Kaiji Kyokai (Netherlands) B.V.
MarED NB 0849
EC TYPE EXAMINATION CERTIFICATE
Certificate No:
THIS IS TO CERTIFY that, Nippon Kaiji Kyokai (Netherlands) B.V., designated by
the Government of The Netherlands as Notified Body according to Council Directive
2014/90/EU on Marine Equipment as amended, did undertake the relevant type approval
procedures for the equipment identified below which was found to be in compliance with the
(*Life Saving Appliance/Marine Pollution Prevention/Fire Protection etc.) requirements of the
Marine Equipment Directive (MED) 2014/90/EU as amended. (*Delete as necessary in final
certificate)
Manufacturer (Applicant):
Address:
Item No.:
Item designation:
Product Type:
Specified Standards:
Attached page(s) regarding type examination approval documentation, test reports,
manufacturer and place of production, limitations for use, condition of the validity and product
particulars are part of this EC Type Examination (Module B) Certificate.
The equipment mentioned above was found to meet the specified testing standards as listed in
Annex A.1 of the Council Directive 2014/90/EU on Marine Equipment as amended.
This Certificate is issued at Barendrecht on (Date) under the authority of the Government of
The Netherlands by Nippon Kaiji Kyokai (Netherlands) B.V. Notified Body No. 0849.
Expiry date of the Certificate: (Date)
Note 1 This Certificate is not valid when presented without the
Attachment consisting of (Number) pages.
Note 2 As Amended means up to and including (Number)
Note 3 Applicant is Holder of this Module B Certificate
Manufacturer(s) is/are appointed on the Attachment.
(Name)
Note 4 A Declaration of Conformity shall be issued by the manufacturer Director
upon satisfactory completion of production verification.
Nippon Kaiji Kyokai (Netherlands) B.V.
Nippon Kaiji Kyokai
4-7, Kioi-Cho, Chiyoda-Ku, Tokyo, Japan
Sole shareholder of
Nippon Kaiji Kyokai (Netherlands) B.V.
1e Barendrechtseweg 48
2992 XC, Barendrecht, The Netherlands Initial Module B Certificate was issued on (Date)
Nippon Kaiji Kyokai (Netherlands) B.V.
Attachment to EC-Type Examination Certificate No: Page 1 of 1
Type examination approval documentation:
Drawing No. Title
XXXX XXXX
Test reports:
Report No. Title of Report or Description of Tests Date
XXXX XXXX XXXX
Manufacturer, Place of Production and Authorised Representative:
Manufacturer: XXXX
XXXX
Place of Production: XXXX
XXXX
Authorised Representative: XXXX
(if applicable) XXXX
Conditions of the validity:
1. The products are to be manufactured in accordance with the approved production quality
assurance system (Module D) or the approved product quality assurance system (Module
E) or the approved product verification procedure (Module F) of the Council Directive
96/98/EC on Marine Equipment as amended, and be affixed with the Mark of Conformity.
2. The Mark of Conformity may only be affixed to the above type approved equipment and a
Manufacturers Declaration of Conformity issued when the production control phase under
1. Above is fully complied with.
3. This Certificate will not be valid if the manufacturer makes any changes or modifications
to the approved equipment which have not been notified to, or agreed with by Nippon
Kaiji Kyokai (Netherlands) B.V.
4. If the Directive or the applied Standard(s) is amended, the product is to be re-approved in
accordance with the amended requirements prior to it being supplied to vessels to which
the amended Directive or Standard(s) apply.
5. The Manufacturer must inform Nippon Kaiji Kyokai (Netherlands) B.V. on all modifications
which may affect compliance with the requirements.
6. Production tests are to be carried out in accordance with approved procedures.
Product particulars:
Product: XXXX
Type: XXXX
(*Other Particulars)
*Limitations for use/Note etc.:
XXXX
(*Delete as necessary)
The End
Nippon Kaiji Kyokai
4-7, Kioi-Cho, Chiyoda-Ku, Tokyo, Japan
Sole shareholder of
Nippon Kaiji Kyokai (Netherlands) B.V.
1e Barendrechtseweg 48
2992 XC, Barendrecht, The Netherlands
