HUAWEI USG6000E Series

Hardware Guide

Issue 10
Date 2022-12-27

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2022. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website: https://e.huawei.com

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. i

HUAWEI USG6000E Series
Hardware Guide Contents

Contents

1 About This Document.............................................................................................................1

2 Info-Finder.................................................................................................................................6
3 Software Versions Compatible with Hardware................................................................ 7
4 Hardware Overview................................................................................................................ 8
4.1 Chassis......................................................................................................................................................................................... 8
4.1.1 USG6510E............................................................................................................................................................................... 8
4.1.2 USG6510E-POE...................................................................................................................................................................21
4.1.3 USG6515E............................................................................................................................................................................ 33
4.1.4 USG6525E............................................................................................................................................................................ 47
4.1.5 USG6530E............................................................................................................................................................................ 63
4.1.6 USG6550E............................................................................................................................................................................ 75
4.1.7 USG6555E............................................................................................................................................................................ 89
4.1.8 USG6560E.......................................................................................................................................................................... 105
4.1.9 USG6565E.......................................................................................................................................................................... 119
4.1.10 USG6575E-B................................................................................................................................................................... 135
4.1.11 USG6580E........................................................................................................................................................................ 152
4.1.12 USG6585E........................................................................................................................................................................ 167
4.1.13 USG6605E-B................................................................................................................................................................... 183
4.1.14 USG6610E........................................................................................................................................................................ 200
4.1.15 USG6615E........................................................................................................................................................................ 214
4.1.16 USG6620E........................................................................................................................................................................ 227
4.1.17 USG6625E........................................................................................................................................................................ 241
4.1.18 USG6630E........................................................................................................................................................................ 254
4.1.19 USG6635E........................................................................................................................................................................ 271
4.1.20 USG6650E........................................................................................................................................................................ 286
4.1.21 USG6655E........................................................................................................................................................................ 302
4.1.22 USG6680E........................................................................................................................................................................ 316
4.1.23 USG6712E........................................................................................................................................................................ 330
4.1.24 USG6716E........................................................................................................................................................................ 344
4.2 Power Modules.................................................................................................................................................................... 358
4.2.1 HW-120300D1D (02220947: 36W AC Power Module)...................................................................................... 358
4.2.2 HW-120300D1D (02221468: 36W AC Power Module)...................................................................................... 361

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. ii

HUAWEI USG6000E Series
Hardware Guide Contents

4.2.3 HW-560268D0D (150W AC Power Module)......................................................................................................... 363

4.2.4 PAC150S12-R (150W AC Power Module)............................................................................................................... 365
4.2.5 PAC1K2S12-B (1200W AC Power Module(Power panel side exhaust))...................................................... 369
4.2.6 PAC1K2S12-CB (1200W AC&240V DC Power Module (Back to Front,Power panel side air-out)).... 374
4.2.7 PAC600S12-B (600W AC Power Module(Back to Front, Power panel side exhaust))............................ 379
4.2.8 PAC600S12-CB (600W AC Power Module(Back to Front, Power panel side exhaust))......................... 384
4.2.9 PAC600S12-DB (600W AC Power Module(Back to Front, Power panel side exhaust))......................... 389
4.2.10 PAC600S12-EB (600W AC Power Module(Back to Front, Power panel side exhaust))....................... 394
4.2.11 PAC60S12-AR (60W AC Power Module).............................................................................................................. 399
4.2.12 PAC60S12-R (60W AC Power Module)................................................................................................................. 404
4.2.13 PDC1000S12-CB (1000W DC Power Module(Back to Front,Power panel side exhaust))...................409
4.2.14 PDC350S12-B (350W DC Power Module)............................................................................................................413
4.3 Fan Modules......................................................................................................................................................................... 417
4.3.1 FAN-023A-B (Fan Box,FAN-023A-B,Fan Box,Fan box(B,FAN panel side exhaust))..................................417
4.3.2 FAN-036A-B (FAN-036A-B,Fan Box,Fan box(B,FAN panel side exhaust)).................................................. 423
4.4 Storage Devices................................................................................................................................................................... 427
4.4.1 Hard Disk........................................................................................................................................................................... 427
4.4.1.1 HDD-SATA1000G-A (HardDisk-1000GB-SATA-7200rpm-2.5"-64M-hot-swap-built-in-Front Panel-
Silver)............................................................................................................................................................................................. 427
4.4.1.2 M.2-SATA240G-A (M.2 SSD,SATA 6Gb/s-240GB,Hot-Swappable)..............................................................432
4.4.1.3 M.2-SATA64G-A (M.2 SSD,SATA 6Gb/s-64GB,Hot-Swappable).................................................................. 435
4.4.1.4 SSD-Sata240G-A (SSD,240GB,SATA 6Gb/s,Read Intensive,2.5inch)...........................................................438
4.4.1.5 SSD-SATA960G-B (SSD 960GB,SATA 6Gb/s,Read Intensive,2.5inch)......................................................... 442
4.4.1.6 SSD-SATA240G-C (SSD-SATA240G-C-Solid State Drives,2.5inch).............................................................. 447
4.4.1.7 SSD-SATA960G-C (SSD-SATA960G-C-Solid State Drives,2.5inch).............................................................. 451
4.5 Optical/Electrical Modules.............................................................................................................................................. 456
4.5.1 Before You Start............................................................................................................................................................... 456
4.5.2 100Mbps SFP Optical Modules.................................................................................................................................. 457
4.5.2.1 S-SFP-FE-LH40-SM1310............................................................................................................................................ 458
4.5.2.2 S-SFP-FE-LH80-SM1550............................................................................................................................................ 458
4.5.2.3 SFP-FE-LX-SM1310-BIDI............................................................................................................................................ 459
4.5.2.4 SFP-FE-LX-SM1550-BIDI............................................................................................................................................ 460
4.5.2.5 SFP-FE-SX-MM1310.................................................................................................................................................... 461
4.5.2.6 eSFP-FE-LX-SM1310....................................................................................................................................................462
4.5.3 1Gbps SFP Copper Modules........................................................................................................................................ 462
4.5.3.1 SFP-1000BaseT............................................................................................................................................................. 463
4.5.4 1Gbps eSFP Optical Modules...................................................................................................................................... 463
4.5.4.1 OSU015N00................................................................................................................................................................... 463
4.5.4.2 S-SFP-GE-LH40-SM1310........................................................................................................................................... 464
4.5.4.3 S-SFP-GE-LH40-SM1550........................................................................................................................................... 465
4.5.4.4 S-SFP-GE-LH80-SM1550........................................................................................................................................... 466
4.5.4.5 SFP-GE-LX-SM1310..................................................................................................................................................... 467
4.5.4.6 SFP-GE-LX-SM1310-BIDI (02315285)................................................................................................................... 467

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. iii

HUAWEI USG6000E Series
Hardware Guide Contents

4.5.4.7 SFP-GE-LX-SM1490-BIDI (02315286)................................................................................................................... 468

4.5.4.8 eSFP-GE-SX-MM850................................................................................................................................................... 469
4.5.4.9 eSFP-GE-ZX100-SM1550 (02315206)...................................................................................................................470
4.5.5 10Gbps SFP+ Optical Modules................................................................................................................................... 471
4.5.5.1 OMXD30000.................................................................................................................................................................. 471
4.5.5.2 OSX010000.................................................................................................................................................................... 472
4.5.5.3 OSX040N01....................................................................................................................................................................473
4.5.5.4 SFP-10G-BXD1.............................................................................................................................................................. 474
4.5.5.5 SFP-10G-BXU1.............................................................................................................................................................. 474
4.5.5.6 SFP-10G-USR................................................................................................................................................................. 475
4.5.5.7 SFP-10G-ZR.................................................................................................................................................................... 476
4.5.6 40Gbps QSFP+ Optical Modules................................................................................................................................ 477
4.5.6.1 QSFP-40G-LR4 (02310MHS)....................................................................................................................................477
4.5.6.2 QSFP-40G-SDLC-PAM................................................................................................................................................. 478
4.5.6.3 QSFP-40G-SR-BD (02311FPA)................................................................................................................................. 479
4.5.6.4 QSFP-40G-eSR4 (02310RMB)................................................................................................................................. 479
4.5.6.5 QSFP-40G-iSR4 (02310MHR).................................................................................................................................. 480
4.5.6.6 QSFP-40G-LX4.............................................................................................................................................................. 481
4.5.6.7 QSFP-40G-ER4.............................................................................................................................................................. 482
4.5.6.8 QSFP-40G-LR4-Lite (02311YVB)............................................................................................................................ 483
4.5.6.9 QSFP-40G-LX4-MM..................................................................................................................................................... 484
4.5.6.10 QSFP-40G-eSDLC-PAM............................................................................................................................................ 485
4.5.7 100Gbps QSFP28 Optical Modules........................................................................................................................... 485
4.5.7.1 QSFP-100G-CWDM4...................................................................................................................................................486
4.5.7.2 QSFP28-100G-LR4 (02311KNU).............................................................................................................................486
4.5.7.3 QSFP28-100G-SR4 (02311GBW)............................................................................................................................ 487
4.5.7.4 QSFP-100G-4WDM-40............................................................................................................................................... 488
4.5.7.5 QSFP-100G-CWDM4-ISP........................................................................................................................................... 489
4.5.7.6 QSFP-100G-CWDM4-Lite.......................................................................................................................................... 490
4.5.7.7 QSFP-100G-ER4............................................................................................................................................................ 490
4.5.7.8 QSFP-100G-SWDM4................................................................................................................................................... 491
4.5.7.9 QSFP28-100G-1310-40km-SM................................................................................................................................492
4.5.7.10 QSFP28-100G-DR...................................................................................................................................................... 493
4.5.7.11 QSFP28-100G-PSM4................................................................................................................................................ 494
4.6 Cables..................................................................................................................................................................................... 494
4.6.1 PGND Cable...................................................................................................................................................................... 495
4.6.1.1 PGND Cable................................................................................................................................................................... 495
4.6.2 AC Power Cable............................................................................................................................................................... 496
4.6.2.1 AC Power Cable............................................................................................................................................................ 496
4.6.3 DC Power Cable............................................................................................................................................................... 510
4.6.3.1 DC Power Cable........................................................................................................................................................... 510
4.6.4 Console Cable................................................................................................................................................................... 512

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. iv

HUAWEI USG6000E Series
Hardware Guide Contents

4.6.4.1 Console Cable............................................................................................................................................................... 512

4.6.5 Ethernet Cable..................................................................................................................................................................514
4.6.5.1 Ethernet Cable.............................................................................................................................................................. 514
4.6.6 Optical Fiber..................................................................................................................................................................... 518
4.6.6.1 Optical Fiber.................................................................................................................................................................. 518

5 Hardware Installation........................................................................................................ 530

5.1 Installation Procedure....................................................................................................................................................... 530
5.2 Installation Preparation.................................................................................................................................................... 531
5.2.1 Precautions........................................................................................................................................................................ 531
5.2.2 Installation Environment Check................................................................................................................................. 532
5.2.3 Instruments Required for the Installation.............................................................................................................. 533
5.3 Installing a Desktop Device............................................................................................................................................ 535
5.3.1 Mounting a Device to a Specified Location........................................................................................................... 535
5.3.1.1 Mounting a Device in a Cabinet............................................................................................................................. 535
5.3.1.2 Mounting a Device on a Workbench.................................................................................................................... 538
5.3.1.3 Mounting a Device Against a Wall........................................................................................................................ 539
5.3.2 Connecting a PGND Cable........................................................................................................................................... 543
5.3.3 Installing a Micro SD Card........................................................................................................................................... 545
5.3.4 Connecting a Console Cable....................................................................................................................................... 547
5.3.5 Connecting an Ethernet Cable....................................................................................................................................549
5.3.6 Installing Optical Transceivers and Connecting Optical Fibers....................................................................... 550
5.3.7 Connecting a Power Adapter...................................................................................................................................... 553
5.3.8 Powering On or Off the USG6510E, USG6510E-POE, USG6530E.................................................................. 555
5.4 Installing a 420 mm Deep Device.................................................................................................................................556
5.4.1 Mounting a Device to a Specified Location........................................................................................................... 557
5.4.1.1 Mounting a Device in a Cabinet............................................................................................................................. 557
5.4.1.2 Mounting a Device on a Workbench.................................................................................................................... 565
5.4.2 Connecting a PGND Cable........................................................................................................................................... 568
5.4.3 Installing a Hard Disk.................................................................................................................................................... 570
5.4.4 Connecting a Console Cable....................................................................................................................................... 573
5.4.5 Connecting an Ethernet Cable....................................................................................................................................575
5.4.6 Installing Optical Transceivers and Connecting Optical Fibers....................................................................... 576
5.4.7 Connecting Power Cables.............................................................................................................................................579
5.4.7.1 Connecting AC Power Cables.................................................................................................................................. 579
5.4.7.2 Connecting DC Power Cables.................................................................................................................................. 581
5.4.8 Powering On or Off the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E,
USG6630E, USG6635E, USG6650E, USG6655E................................................................................................................583
5.5 Installing a 600 mm Deep Device.................................................................................................................................585
5.5.1 Mounting a Device in a Cabinet................................................................................................................................ 585
5.5.2 Connecting a PGND Cable........................................................................................................................................... 591
5.5.3 Installing a Hard Disk.................................................................................................................................................... 594
5.5.4 Connecting a Console Cable....................................................................................................................................... 595

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. v

HUAWEI USG6000E Series
Hardware Guide Contents

5.5.5 Installing Optical Transceivers and Connecting Optical Fibers....................................................................... 597

5.5.6 Connecting AC Power Cables...................................................................................................................................... 600
5.5.7 Powering On or Off the USG6680E, USG6712E, USG6716E............................................................................ 601

6 Maintaining the Hardware............................................................................................... 604

6.1 Replacing the Hard Disk.................................................................................................................................................. 604
6.2 Replacing a Power Module............................................................................................................................................. 607
6.3 Replacing a Fan Module.................................................................................................................................................. 609
6.4 Replacing a Micro SD Card (USG6510E, USG6510E-POE, USG6530E)............................................................ 611
6.5 Replacing a Device............................................................................................................................................................. 613

A Appendix............................................................................................................................... 616
A.1 Quick Reference Tables of Power Cables................................................................................................................... 616
A.2 Requirements for Installation Environment.............................................................................................................. 628
A.2.1 Device Position................................................................................................................................................................ 628
A.2.2 Humidity, Temperature, and Cleanness.................................................................................................................. 628
A.2.3 ESD Requirements.......................................................................................................................................................... 630
A.2.4 Lightning Protection and Grounding....................................................................................................................... 631
A.2.5 Power Supply....................................................................................................................................................................634
A.2.6 Electromagnetic Protection......................................................................................................................................... 637
A.3 Fault Tag............................................................................................................................................................................... 637

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. vi

HUAWEI USG6000E Series
Hardware Guide 1 About This Document

1 About This Document

Related Version
The following table lists the product version related to this document.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 1

HUAWEI USG6000E Series
Hardware Guide 1 About This Document

Product Name Version

The USG6000E series V600R006

has the following V600R007
models:
● USG6500E
– USG6510E
– USG6510E-POE
– USG6515E
– USG6525E
– USG6530E
– USG6550E
– USG6555E
– USG6560E
– USG6565E
– USG6575E-B
– USG6580E
– USG6585E
● USG6600E
– USG6605E-B
– USG6610E
– USG6615E
– USG6620E
– USG6625E
– USG6630E
– USG6635E
– USG6650E
– USG6655E
– USG6680E
● USG6700E
– USG6712E
– USG6716E

Intended Audience
This document describes hardware structure, installation guide, and hardware
maintenance. The content of this document includes the appearance and
specifications of the product, preparation before the installation, installation,
cabling, and hardware replacement.
This document is intended for installation personnel and administrators who
install and maintain USG. The installation personnel or administrators must have
experience in the installation and maintenance of networking devices.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 2

HUAWEI USG6000E Series
Hardware Guide 1 About This Document

Symbol Conventions
The symbols that may be found in this document are defined as follows.

Symbol Description

Indicates a hazard with a high level of risk which,

if not avoided, will result in death or serious
injury.

Indicates a hazard with a medium level of risk

which, if not avoided, could result in death or
serious injury.

Indicates a hazard with a low level of risk which,

if not avoided, could result in minor or moderate
injury.

Indicates a potentially hazardous situation which,

if not avoided, could result in equipment damage,
data loss, performance deterioration, or
unanticipated results.
NOTICE is used to address practices not related to
personal injury.

Supplements the important information in the

main text.
NOTE is used to address information not related
to personal injury, equipment damage, and
environment deterioration.

Command Conventions
The command conventions that may be found in this document are defined as
follows.

Convention Description

Boldface The keywords of a command line are in boldface.

Italic Command arguments are in italics.

[] Items (keywords or arguments) in brackets [ ] are

optional.

{ x | y | ... } Optional items are grouped in braces and separated

by vertical bars. One item is selected.

[ x | y | ... ] Optional items are grouped in brackets and

separated by vertical bars. One item is selected or
no item is selected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 3

HUAWEI USG6000E Series
Hardware Guide 1 About This Document

Convention Description

{ x | y | ... } * Optional items are grouped in braces and separated

by vertical bars. A minimum of one item or a
maximum of all items can be selected.

[ x | y | ... ] * Optional items are grouped in brackets and

separated by vertical bars. Several items or no item
can be selected.

&<1-n> The parameter before the & sign can be repeated 1

to n times.

# A line starting with the # sign is comments.

GUI Conventions
The GUI conventions that may be found in this document are defined as follows.

Convention Description

Boldface Buttons, menus, parameters, tabs, window, and

dialog titles are in boldface. For example, click OK.

> Multi-level menus are in boldface and separated by

the ">" signs. For example, choose File > Create >
Folder.

Update History
Updates between document issues are cumulative. Therefore, the latest document
issue contains all updates made in previous issues.
● Updates in Issue 10 (2022-12-27) of Product Version V600R007C20SPC602
The tenth commercial release has the following updates:
Added the hard disks: SSD-SATA960G-C (SSD-SATA960G-C-Solid State
Drives,2.5inch).
● Updates in Issue 09 (2022-08-22) of Product Version V600R007C20SPC600
The ninth commercial release has the following updates:
– Added the models with the BOM numbers containing "-001": USG6605E-
B, USG6680E, USG6712E, USG6716E.
– Added the models with the BOM numbers containing "-002": USG6510E,
USG6525E, USG6530E, USG6565E, USG6575E-B, USG6585E, USG6610E,
USG6620E, USG6630E, USG6650E.
– Added the models with the BOM numbers containing "-004": USG6555E.
– Added the hard disks: SSD-SATA240G-C (SSD-SATA240G-C-Solid State
Drives,2.5inch).
● Updates in Issue 08 (2022-04-20) of Product Version V600R007C20SPC500

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 4

HUAWEI USG6000E Series
Hardware Guide 1 About This Document

The eighth commercial release has the following updates:

– Added the models with the BOM numbers containing "-001": USG6525E,
USG6555E, USG6565E, USG6585E.
– Added the PAC600S12-EB (600W AC Power Module(Back to Front,
Power panel side exhaust)).
– Added the 100Mbps SFP Optical Modules.
● Updates in Issue 07 (2021-08-27) of Product Version V600R007C20SPC300
The seventh commercial release has the following updates:
– Added the models with the BOM numbers containing "-001": USG6510E,
USG6530E, USG6610E, USG6620E, USG6630E, USG6650E.
– Added the PAC1K2S12-CB (1200W AC&240V DC Power Module (Back
to Front,Power panel side air-out)).
● Updates in Issue 06 (2020-11-28) of Product Version V600R007C20SPC100
and V600R007C20SPC200
The sixth commercial release has the following updates:
Added the USG6610E, USG6620E.
● Updates in Issue 05 (2020-08-10) of Product Version V600R007C20
The fifth commercial release has the following updates:
– Added the USG6575E-B.
– Added the USG6605E-B, USG6635E-DC.
– Added the PAC150S12-R (150W AC Power Module).
– Added the PDC1000S12-CB (1000W DC Power Module(Back to
Front,Power panel side exhaust)).
– Added the SSD-SATA960G-B (SSD 960GB,SATA 6Gb/s,Read Intensive,
2.5inch).
● Updates in Issue 04 (2020-02-27) of Product Version V600R007C00
The fourth commercial release has the following updates:
Added the PAC60S12-AR (60W AC Power Module).
● Updates in Issue 03 (2019-09-25) of Product Version V600R007C00
The third commercial release has the following updates:
– Added the USG6525E, USG6555E, USG6565E, USG6585E.
– Added the USG6615E, USG6625E, USG6635E-AC, USG6655E.
● Updates in Issue 02 (2019-05-20) of Product Version V600R007C00
The second commercial release has the following updates:
Updated the USG6510E, USG6530E.
● Updates in Issue 01 (2019-02-28) of Product Version V600R006C00
Initial commercial release.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 5

HUAWEI USG6000E Series
Hardware Guide 2 Info-Finder

2 Info-Finder

Info-Finder is a tool platform, as shown in Figure 2-1. It allows you to search for
key product information by product series and model. The key product information
includes basic information such as the software specifications, life cycles, and
hardware information, and operation and maintenance information such as the
licenses, alarms, logs, commands, and MIBs. The hardware-related tools are as
follows:
● Product image gallery: provides product photos, Visio-format templates, and
network element icons for you to produce design drawings and networking
diagrams.
● Hardware configuration: automatically generates hardware configuration
diagrams after you select components are required and calculates the weight,
power consumption, and heat consumption.
● Hardware center: provides the technical specifications of devices and
components, as well as the mapping between devices, components, and
versions.
● 3D model: Using this function, you can query product images, product
overview, and component insertion/removal videos, enabling you to quickly
obtain product information in one-stop mode.

Figure 2-1 Info-Finder GUI

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 6

HUAWEI USG6000E Series
Hardware Guide 3 Software Versions Compatible with Hardware

3 Software Versions Compatible with

Hardware

This section describes software versions compatible with the USG hardware.

The USG has its software versions constantly updated and optimized ever since its
launch. Figure 3-1 displays software versions compatible with the USG and
version evolution.

NOTE

● As documentation and software versions are evolving, the Hardware Guide may describe
a collection of all hardware of a product series, which does not mean that all hardware
in this document is supported in this version. Before using hardware, carefully check the
First Supported Version of the hardware in Hardware Guide.
● The Hardware Guide describes all the device models supported in a version, and these
models may not be available for sales currently. To obtain accurate subscription
information, regularly check the official http://e.huawei.com for product change
notices (PCNs) and lifecycle management bulletins, or you can use the Info-Finder tool
to query product EOX information.

Figure 3-1 Software versions compatible with hardware

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 7

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4 Hardware Overview

This chapter describes hardware information for all USG6000E series and main
components.

4.1 Chassis
This chapter describes hardware information for all USG6000E series, including
hardware appearance, front and real panels, power supply system, heat dissipation
system, and technical specifications.

NOTE

● The model shown on the panel of the USG is the series number USG6000E. For the
specific model, see the nameplate attached on the bottom of the USG.
● The device series number can be provided using laser marking on the panel or film
silkscreen. The device functions are the same regardless of the series number
presentation mode.

4.1.1 USG6510E

Overview

Table 4-1 Basic information about the USG6510E

Description Part Number Model First supported

version

USG6510E AC 02352PQH USG6510E-AC V600R007C00

Host (10*GE
RJ45+2*GE SFP,
1*Adapter)

USG6510E AC 02352PQH-001 USG6510E-AC V600R007C20SPC

Host (10*GE 300
RJ45+2*GE SFP,
1*Adapter)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 8

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Description Part Number Model First supported

version

USG6510E AC 02352PQH-002 USG6510E-AC V600R007C20SPC

Host(10*GE 600
RJ45+2*GE SFP,
1*Adapter)

Appearance
NOTE

The standard USB port of the earlier-delivered models is USB 3.0, and that of the later-
delivered models is USB 2.0. This document uses a model with a USB 3.0 port as an
example.

Figure 4-1 Appearance of the USG6510E (front view)

Figure 4-2 Appearance of the USG6510E (rear view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 9

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Components

Figure 4-3 Components of the USG6510E

1. Indicator 2. Product 3. Protective 4. Fixed 5. MAC label

area series ID ground interface area
terminal

6. SN label - - - -

Table 4-2 Component functions

Name Description

Indicator area Provides various indicators to display the device

running status in real time.

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

Fixed interface area ● Provides clip hole and power receptacle.

● Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.
● Houses a Micro SD card to store logs and reports.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 10

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Indicators and Buttons

Figure 4-4 Indicators and buttons on the USG6510E

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. RST button

USB, CLOUD, port ACT port LINK indicator
and MicroSD indicator indicator
indicators

Table 4-3 Indicators on the USG6510E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 11

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on A system

fault occurs.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 12

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off The device is

not connected
to the cloud
management
platform.

MicroSD Micro SD Green Steady on The micro SD

indicator card is
present.

- Off The micro SD

card is not
detected.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- Optical port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 13

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-4 Buttons on the USG6510E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-5 Ports on the USG6510E

1. Clip hole 2. Power 3. GE electrical 4. WAN port 5. GE optical

receptacle port port

6. Micro SD 7. USB port 8. Console port - -

card slot
NOTE
● Earlier-
delivered
models:
USB 3.0
● Later-
delivered
models:
USB 2.0

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 14

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-5 Ports on the USG6510E

Port Connector Type Description Available
Components

Clip hole - The hole is used Power cable clip

to install the
power cable clip,
which is used to
bind and fix the
power cable.

Power receptacle - The receptacle ● 36 W Power

connects to the Adapter
tuning fork plug (02220947)
of the power ● 36 W Power
adapter. Adapter
(02221468)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 15

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE electrical ports RJ45 8 10/100/1000M Ethernet Cable

(0 to 7) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/7.
GigabitEthernet
0/0/0 is an inband
management port
and its default IP
address is
192.168.0.1. After
this port is
connected to your
PC through
Ethernet cables,
you can log in to
the device using
Telnet, STelnet, or
web UI to
configure or
manage the
device.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 16

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

WAN ports (8 to RJ45 2 10/100/1000M Ethernet Cable

9) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/8 to
GigabitEthernet
0/0/9.
The device is
connected to the
WAN or cloud
management
platform using an
Ethernet cable.

GE optical port SFP 2 GE Ethernet ● 100Mbps SFP

(10 to 11) optical ports, Optical
numbered from Modules
GigabitEthernet ● 1Gbps SFP
0/0/10 to Copper
GigabitEthernet Modules
0/0/11.
Compatible with ● 1Gbps eSFP
GE Ethernet Optical
optical ports. Modules
NOTE
In
V600R007C20SPC5
00 and later
versions, GE
optical ports
support 100Mbps
SFP Optical
Modules.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 17

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Micro SD card slot Micro SD The micro SD card SDSDQAE-064G

slot allows you to (BOM code:
insert a micro SD 06010308,
card to record capacity: 64GB,
logs and reports dimensions (H x
in real time. The W x D): 1 mm x
micro SD card is 15.00 mm x 11.00
optional. You can mm/0.04 in. x
purchase one 0.59 in. x 0.43 in)
from Huawei if
needed.
You are advised to
install an anti-
theft board
delivered with the
device to protect
the micro SD card.

USB port USB Type A USB port allows USB flash drive
you to insert an
USB flash drive
for system
software
upgrades. For
details on
upgrades through
USB flash drives,
refer to the
Upgrade Guide
delivered with the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 18

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Power Supply System

● Early delivery: The device has no built-in power modules and uses a 36 W
Power Adapter (02220947) or 36 W Power Adapter (02221468) for power
supply.
● Later delivery: The device has no built-in power modules and uses a 36 W
Power Adapter (02221468) for power supply.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Technical Specifications

Table 4-6 Technical specifications of the USG6510E

Item Specification

Installation Type ● Rack

● Work bench
● Against the wall

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 250 mm x 210 mm (1.72 in.

x D) [mm(in.)] x 9.84 in. x 8.27 in.)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 19

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Dimensions with packaging (H x W x 110 mm x 465 mm x 335 mm (4.33 in.

D) [mm(in.)] x 18.31 in. x 13.19 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 2.3 kg (5.07 lb)

Weight without packaging [kg(lb)] 1.57 kg (3.46 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.2 GHz

Memory DDR4 1 GB

NOR Flash ● USG6510E-AC (02352PQH): 32 MB

● USG6510E-AC (02352PQH-001): 64
MB
● USG6510E-AC (02352PQH-002): 64
MB

NAND Flash 1 GB

Hard disk Optional. Purchase one 64-GB micro

SD card from Huawei as required.

Console port RJ45

Maximum power consumption [W] 21.6 W

Maximum heat dissipation [BTU/hour] 73.7 BTU/hour

MTBF [years] 57.29 years

MTTR [hours] 2 hours

Power supply mode Power adapter external

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 264 V, 47 Hz to 63 Hz

Maximum input current [A] 1A

Rated output power [W] ● USG6510E-AC (02352PQH): -

● USG6510E-AC (02352PQH-001): -
● USG6510E-AC (02352PQH-002):
36W/12V

Maximum output power [W] 36 W

Types of fans None

Number of fan modules 0

Heat dissipation mode Has no fan and uses natural cooling.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 20

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Maximum number of GE ports 2

Maximum number of electrical ports 10

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.2 USG6510E-POE

Overview

Table 4-7 Basic information about the USG6510E-POE

Description Part Number Model First supported
version

USG6510E-POE 02352CSC USG6510E-POE- V600R006C00

AC Host (10*GE AC
RJ45 + 2*GE
SFP,with the
AC/DC adapter)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 21

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-6 Appearance of the USG6510E-POE (front view)

Figure 4-7 Appearance of the USG6510E-POE (rear view)

Components

Figure 4-8 Components of the USG6510E-POE

1. Indicator 2. Protective 3. Fixed 4. MAC label 5. SN label

area ground interface area
terminal

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 22

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-8 Component functions

Name Description

Indicator area Provides various indicators to display the device

running status in real time.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

Fixed interface area ● Provides clip hole and power receptacle.

● Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.
● Houses a Micro SD card to store logs and reports.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Indicators and Buttons

Figure 4-9 Indicators and buttons on the USG6510E-POE

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. RST button

USB, CLOUD, port ACT port LINK indicator
and MicroSD indicator indicator
indicators

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 23

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-9 Indicators on the USG6510E-POE

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on A system

fault occurs.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 24

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

MicroSD Micro SD Green Steady on The micro SD

indicator card is
present.

- Off The micro SD

card is not
detected.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- Optical port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 25

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off No link is
established
on the port.

Table 4-10 Buttons on the USG6510E-POE

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-10 Ports on the USG6510E-POE

1. Clip hole 2. Power 3. GE electrical 4. WAN port 5. GE optical

receptacle port port

6. Micro SD 7. USB 3.0 port 8. Console port - -

card slot

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 26

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-11 Ports on the USG6510E-POE

Port Connector Type Description Available
Components

Clip hole - The hole is used Power cable clip

to install the
power cable clip,
which is used to
bind and fix the
power cable.

Power receptacle - The receptacle 150 W Power

connects to the Adapter
tuning fork plug
of the power
adapter.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 27

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE electrical ports RJ45 8 10/100/1000M Ethernet Cable

(0 to 7) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/7. Among the
interfaces,
GigabitEthernet0/
0/0 to
GigabitEthernet0/
0/3 support PoE
output and can
supply power to
PDs (such as IP
phones and
surveillance
cameras).
GigabitEthernet
0/0/0 is an inband
management port
and its default IP
address is
192.168.0.1. After
this port is
connected to your
PC through
network cables,
you can log in to
the device using
Telnet, STelnet, or
web UI to
configure or
manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 28

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components
NOTE
● When the
device supplies
power to PDs,
the total power
consumption of
the PDs must
not exceed 60
W.
● Arrowheads
show the
positions of
ports. A down
arrowhead
indicates a port
at the bottom,
and an up
arrowhead
indicates a port
at the top.

WAN ports (8 to RJ45 2 10/100/1000M Ethernet Cable

9) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/8 to
GigabitEthernet
0/0/9.
The device is
connected to the
WAN or cloud
management
platform using a
network cable.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 29

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE optical port SFP 2 GE Ethernet ● 100Mbps SFP

(10 to 11) optical ports, Optical
numbered from Modules
GigabitEthernet ● 1Gbps SFP
0/0/10 to Copper
GigabitEthernet Modules
0/0/11.
Compatible with ● 1Gbps eSFP
GE Ethernet Optical
optical ports. Modules
NOTE
In
V600R007C20SPC5
00 and later
versions, GE
optical ports
support 100Mbps
SFP Optical
Modules.

Micro SD card slot Micro SD The micro SD card SDSDQAE-064G

slot allows you to (BOM code:
insert a micro SD 06010308,
card to record capacity: 64GB,
logs and reports dimensions (H x
in real time. The W x D): 1 mm x
micro SD card is 15.00 mm x 11.00
optional. You can mm/0.04 in. x
purchase one 0.59 in. x 0.43 in)
from Huawei if
needed.
You are advised to
install an anti-
theft board
delivered with the
device to protect
the micro SD card.

USB 2.0 port USB USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 30

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Power Supply System

The device has no built-in power modules and uses a 150 W Power Adapter for
power supply.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Technical Specifications

Table 4-12 Technical specifications of the USG6510E-POE-AC

Item Specification

Installation Type ● Rack

● Work bench
● Against the wall

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 250 mm x 210 mm (1.72 in.

x D) [mm(in.)] x 9.84 in. x 8.27 in.)

Dimensions with packaging (H x W x 110 mm x 470 mm x 335 mm (4.33 in.

D) [mm(in.)] x 18.5 in. x 13.19 in.)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 31

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Chassis height [U] 1U

Weight with packaging [kg(lb)] 3.45 kg (7.61 lb)

Weight without packaging [kg(lb)] 1.75 kg (3.86 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.2 GHz

Memory DDR4 1 GB

NOR Flash 32 MB

NAND Flash 1 GB

Hard disk Optional. Purchase one 64-GB micro

SD card from Huawei as required.

Console port RJ45

Maximum power consumption [W] 85.1 W

Maximum heat dissipation [BTU/hour] 291 BTU/hour

MTBF [years] 57.29 years

MTTR [hours] 2 hours

Power supply mode Power adapter external

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Maximum input current [A] 2A

Maximum output power [W] 150 W

Types of fans None

Number of fan modules 0

Heat dissipation mode Has no fan and uses natural cooling.

Maximum number of GE ports 2

Maximum number of electrical ports 10

PoE Supported

PoE power interfaces 4

Network cable type and longest ● IEEE 802.3af: 100 m if there is no

transmission special requirement
● IEEE 802.3at: 100 m for CAT5e and
higher

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 32

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.3 USG6515E

Overview

Table 4-13 Basic information about the USG6515E

Description Part Number Model First supported

version

USG6515E AC 02352CBP USG6515E-AC V600R006C00

Host (2*GE WAN
+ 8*GE Combo
+ 16*GE RJ45
+ 2*10GE SFP+,1
AC power)

Appearance

Figure 4-11 Appearance of the USG6515E (front view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 33

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-12 Appearance of the USG6515E (rear view)

Components

Figure 4-13 Components of the USG6515E

1. Product 2. Indicator 3. Fixed 4. Protective 5. MAC label

series ID and button interface area ground
area terminal

6. SN label 7. Fan module 8. Optional 9. Power -

power module module
slot

Table 4-14 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 34

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The slot number of the fan module is 4.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-14 Indicators and buttons on the USG6515E

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. Optical port

USB, HA, WAN port ACT port LINK ACT indicator LINK indicator
and CLOUD indicator indicator
indicators

6. MGMT port 7. RST button - - -

indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 35

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-15 Indicators on the USG6515E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 36

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Hot backup,

managing the
master device

Green Blinks once Hot backup,

every 2 managing the
seconds (0.5 slave device
Hz).

Red Steady on Dual-system

hot backup is
faulty.

- Off The dual-

system hot
backup
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 37

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 38

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-16 Buttons on the USG6515E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-15 Ports on the USG6515E

1. GE electrical 2. Combo port 3. 10GE optical 4. WAN port 5. SSD card

port port slot

6. USB 3.0 port 7. USB 2.0 port 8. Console port 9. MGMT port -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 39

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-17 Ports on the USG6515E

Port Connector Type Description Available
Components

GE electrical ports RJ45 16 10/100/1000M Ethernet Cable

(0 to 15) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/15.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 40

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Combo ports (16 RJ45 + SFP Combo ports. ● Ethernet

to 23) Combo ports are Cable
logic ports. One ● 1Gbps eSFP
combo port can Optical
work as a GE Modules
electrical interface
or a GE optical
port. Each combo
port has only one
internal
forwarding port.
When the
electrical port is
enabled, the
optical port is
disabled. When
the optical port is
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/16 to
GigabitEthernet
0/0/23. By
default, the
combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 41

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

10GE optical ports SFP+ 2 10GE 10Gbps SFP+

(0 to 1) autosensing Optical Modules
Ethernet optical
ports, numbered
from
XGigabitEthernet
0/0/0 to
XGigabitEthernet
0/0/1. Not
compatible with
GE optical
modules.

WAN ports (0 to RJ45 2 10/100/1000M Ethernet Cable

1) autosensing
Ethernet electrical
ports, numbered
from WAN 0/0/0
to WAN 0/0/1.
The device is
connected to the
WAN or cloud
management
center using a
network cable.

SSD card slot - The M.2 module ● Hard Disk

is inserted to Unit M.2-
record logs and Sata64G-A
reports in real ● Hard Disk
time. The M.2 Unit M.2-
module is Sata240G-A
optional. You can
purchase the M.2
module as
required.

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 42

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

USB 2.0 port USB 2.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 43

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

The power supply system has one PAC60S12-R AC power module, but two power
modules can be configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system uses one FAN-023A-B module to dissipate heat for
the system. From the front panel, the device provides a front-to-rear air flow. The
fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 44

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-16 System air flow of the USG6515E

Technical Specifications

Table 4-18 Technical specifications of the USG6515E-AC

Item Specification

Installation Type ● Rack

● Work bench

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 220 mm x 550 mm x 530 mm (8.66 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 8.1 kg (17.86 lb)

Weight without packaging [kg(lb)] 5.71 kg (12.59 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.4 GHz

Memory DDR4 4 GB

NOR Flash 32 MB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 45

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

NAND Flash 2 GB

Hard disk Optional. M.2 SSD (64GB/240GB), hot-

swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 46.4 W

Maximum heat dissipation [BTU/hour] 158.7 BTU/hour

MTBF [years] 45.56 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 264 V, 47 Hz to 63 Hz

Types of fans Pluggable

Number of fan modules 1

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 2

Maximum number of GE ports 24

Maximum number of electrical ports 24

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 46

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.4 USG6525E

Overview

Table 4-19 Basic information about the USG6525E

Description Part Number Model First supported

version

USG6525E AC 02353AFX USG6525E-AC V600R007C00

Host (2*GE WAN
+8*GE Combo
+2*10GE SFP+,1
AC power)

USG6525E AC 02353AFX-001 USG6525E-AC V600R007C20SPC

Host(2*GE WAN 500
+8*GE Combo
+2*10GE SFP+,1
AC power)

USG6525E AC 02353AFX-002 USG6525E-AC V600R007C20SPC

Host(2*GE WAN 600
+8*GE Combo
+2*10GE SFP+,1
AC power)

Appearance
NOTE

The two USB ports of earlier-delivered models are USB 3.0 and USB 2.0 respectively,
whereas those of later-delivered models are both USB 2.0. In this document, earlier-
delivered models are used as examples.

Figure 4-17 Appearance of the USG6525E (front view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 47

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-18 Appearance of the USG6525E (rear view)

Components

Figure 4-19 Components of the USG6525E

1. Product 2. Indicator 3. Fixed 4. Protective 5. MAC label

series ID and button interface area ground
area terminal

6. SN label 7. Fan module 8. Optional 9. Power -

power module module
slot

Table 4-20 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 48

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The slot number of the fan module is 4.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-20 Indicators and buttons on the USG6525E

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. Optical port

USB, HA, WAN port ACT port LINK ACT indicator LINK indicator
and CLOUD indicator indicator
indicators

6. MGMT port 7. RST button - - -

indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 49

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-21 Indicators on the USG6525E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 50

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Hot backup,

managing the
master device

Green Blinks once Hot backup,

every 2 managing the
seconds (0.5 slave device
Hz).

Red Steady on Dual-system

hot backup is
faulty.

- Off The dual-

system hot
backup
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 51

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 52

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-22 Buttons on the USG6525E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-21 Ports on the USG6525E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 53

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. Combo port 2. 10GE optical 3. WAN port 4. SSD card 5. USB 3.0 port
port slot or USB0
NOTE
● Earlier-
delivered
models:
USB 3.0
● Later-
delivered
models:
USB0 (USB
2.0)

6. USB 2.0 port 7. Console port 8. MGMT port - -

or USB1
NOTE
● Earlier-
delivered
models:
USB 2.0
● Later-
delivered
models:
USB1 (USB
2.0)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 54

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-23 Ports on the USG6525E

Port Connector Type Description Available
Components

Combo ports (0 to RJ45 + SFP Combo ports. ● Ethernet

7) Combo ports are Cable
logic ports. One ● 100Mbps SFP
combo port can Optical
work as a GE Modules
electrical interface
or a GE optical ● 1Gbps eSFP
port. Each combo Optical
port has only one Modules
internal NOTE
forwarding port. In
V600R007C20SPC5
When the 00 and later
electrical port is versions, Combo
enabled, the ports support
optical port is 100Mbps SFP
disabled. When Optical Modules.
the optical port is
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/7. By default,
the combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 55

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

10GE optical ports SFP+ 2 10GE optical ● 1Gbps SFP

(0 to 1) ports, numbered Copper
from Modules
XGigabitEthernet ● 1Gbps eSFP
0/0/0 to Optical
XGigabitEthernet Modules
0/0/1.
● 10Gbps SFP+
NOTE
Optical
In V600R007C20
and later versions, Modules
10GE optical ports
support 1Gbps SFP
Copper Modules
and 1Gbps eSFP
Optical Modules.
By default, the rate
of 10GE optical
ports are 10GE.
You can run the
set device port-
config-mode
[ 10ge | ge ]
command to set
the rate of 10GE
optical ports are to
10GE or GE as
required.

WAN ports (0 to RJ45 2 10/100/1000M Ethernet Cable

1) autosensing
Ethernet electrical
ports, numbered
from WAN 0/0/0
to WAN 0/0/1.
The device is
connected to the
WAN or cloud
management
center using a
network cable.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 56

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

SSD card slot - The M.2 module ● Hard Disk

is inserted to Unit M.2-
record logs and Sata64G-A
reports in real ● Hard Disk
time. The M.2 Unit M.2-
module is Sata240G-A
optional. You can
purchase the M.2
module as
required.

USB 3.0 port or USB Type A USB port allows USB flash drive
USB0 you to insert an
USB flash drive
for system
software
upgrades. For
details on
upgrades through
USB flash drives,
refer to the
Upgrade Guide
delivered with the
device.

USB 2.0 port or USB Type A USB ports allow USB flash drive
USB1 you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 57

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 58

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

● Early delivery: The power supply system has one PAC60S12-AR, PAC60S12-R,
or PAC600S12-CB AC power module. Two power modules can be configured
for 1+1 power redundancy.
● Later delivery: The power supply system has one PAC60S12-AR AC power
module. Two power modules can be configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system uses one FAN-023A-B module to dissipate heat for
the system. From the front panel, the device provides a front-to-rear air flow. The
fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 59

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-22 System air flow of the USG6525E

Technical Specifications

Table 4-24 Technical specifications of the USG6525E

Item Specification

Installation Type ● Rack

● Work bench

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 220 mm x 550 mm x 530 mm (8.66 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] ● USG6525E-AC (02353AFX): 8.75 kg

(19.29 lb)
● USG6525E-AC (02353AFX-001):
7.93 kg (17.48 lb)
● USG6525E-AC (02353AFX-002):
7.93 kg (17.48 lb)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 60

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Weight without packaging [kg(lb)] ● USG6525E-AC (02353AFX): 5.8 kg

(12.79 lb)
● USG6525E-AC (02353AFX-001):
5.95 kg (13.12 lb)
● USG6525E-AC (02353AFX-002):
5.95 kg (13.12 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.4 GHz

Memory DDR4 4 GB

NOR Flash ● USG6525E-AC (02353AFX):

32 MB
NOTE
The NOR flash memory size of devices
delivered later is 64 MB. You can run
the display version command to check
the NOR flash memory size.
● USG6525E-AC (02353AFX-001):
32 MB
NOTE
The NOR flash memory size of devices
delivered later is 64 MB. You can run
the display version command to check
the NOR flash memory size.
● USG6525E-AC (02353AFX-002):
32 MB
NOTE
The specification of the NOR flash of
the device to be delivered is 64 MB. You
can run the display version command
to view the NOR flash memory
specification of a device.

NAND Flash 2 GB

Hard disk Optional. M.2 SSD (64GB/240GB), hot-

swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] ● USG6525E-AC (02353AFX): 40 W

● USG6525E-AC (02353AFX-001):
45.3 W
● USG6525E-AC (02353AFX-002):
45.3 W

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 61

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Maximum heat dissipation [BTU/hour] ● USG6525E-AC (02353AFX): 136.8

BTU/hour
● USG6525E-AC (02353AFX-001):
154.4 BTU/hour
● USG6525E-AC (02353AFX-002):
154.4 BTU/hour

MTBF [years] 68.98 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Types of fans Pluggable

Number of fan modules 1

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 2

Maximum number of GE ports 8

Maximum number of electrical ports 8

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 62

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.5 USG6530E

Overview

Table 4-25 Basic information about the USG6530E

Description Part Number Model First supported
version

USG6530E AC 02352QVD USG6530E-AC V600R007C00

Host (10*GE RJ45
+ 2*10GE SFP+,
1*Adapter)

USG6530E AC 02352QVD-001 USG6530E-AC V600R007C20SPC

Host (10*GE RJ45 300
+ 2*10GE SFP+,
1*Adapter)

USG6530E AC 02352QVD-002 USG6530E-AC V600R007C20SPC

Host(10*GE 600
RJ45+2*10GE SFP
+,1*Adapter)

Appearance
NOTE

The standard USB port of the earlier-delivered models is USB 3.0, and that of the later-
delivered models is USB 2.0. This document uses a model with a USB 3.0 port as an
example.

Figure 4-23 Appearance of the USG6530E (front view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 63

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-24 Appearance of the USG6530E (rear view)

Components

Figure 4-25 Components of the USG6530E

1. Indicator 2. Product 3. Protective 4. Fixed 5. MAC label

area series ID ground interface area
terminal

6. SN label - - - -

Table 4-26 Component functions

Name Description

Indicator area Provides various indicators to display the device

running status in real time.

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 64

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

Fixed interface area ● Provides clip hole and power receptacle.

● Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.
● Houses a Micro SD card to store logs and reports.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Indicators and Buttons

Figure 4-26 Indicators and buttons on the USG6530E

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. RST button

USB, CLOUD, port ACT port LINK indicator
and MicroSD indicator indicator
indicators

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 65

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-27 Indicators on the USG6530E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on A system

fault occurs.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 66

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

MicroSD Micro SD Green Steady on The micro SD

indicator card is
present.

- Off The micro SD

card is not
detected.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- Optical port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 67

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off No link is
established
on the port.

Table 4-28 Buttons on the USG6530E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-27 Ports on the USG6530E

1. Clip hole 2. Power 3. GE electrical 4. WAN port 5. 10GE optical

receptacle port port

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 68

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

6. Micro SD 7. USB port 8. Console port - -

card slot
NOTE
● Earlier-
delivered
models:
USB 3.0
● Later-
delivered
models:
USB 2.0

Table 4-29 Ports on the USG6530E

Port Connector Type Description Available
Components

Clip hole - The hole is used Power cable clip

to install the
power cable clip,
which is used to
bind and fix the
power cable.

Power receptacle - The receptacle ● 36 W Power

connects to the Adapter
tuning fork plug (02220947)
of the power ● 36 W Power
adapter. Adapter
(02221468)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 69

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE electrical ports RJ45 8 10/100/1000M Ethernet Cable

(0 to 7) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/7.
GigabitEthernet
0/0/0 is an inband
management port
and its default IP
address is
192.168.0.1. After
this port is
connected to your
PC through
Ethernet cables,
you can log in to
the device using
Telnet, STelnet, or
web UI to
configure or
manage the
device.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 70

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

WAN port (8 to 9) RJ45 2 10/100/1000M Ethernet Cable

autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/8 to
GigabitEthernet
0/0/9.
The device is
connected to the
WAN or cloud
management
platform using an
Ethernet cable.
NOTE
The WAN ports of
the devices
delivered earlier
are vertically
arranged, whose
functions are the
same as those of
the WAN ports
that are
horizontally
arranged.

10GE optical ports SFP+ 2 GE/10GE ● 100Mbps SFP

(0 to 1) autosensing Optical
Ethernet optical Modules
ports, numbered ● 1Gbps SFP
from Copper
XGigabitEthernet Modules
0/0/0 to
XGigabitEthernet ● 1Gbps eSFP
0/0/1. Optical
Modules
● 10Gbps SFP+
Optical
Modules
NOTE
In
V600R007C20SPC5
00 and later
versions, 10GE
optical ports
support 100Mbps
SFP Optical
Modules.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 71

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Micro SD card slot Micro SD The micro SD card SDSDQAE-064G

slot allows you to (BOM code:
insert a micro SD 06010308,
card to record capacity: 64GB,
logs and reports dimensions (H x
in real time. The W x D): 1 mm x
micro SD card is 15.00 mm x 11.00
optional. You can mm/0.04 in. x
purchase one 0.59 in. x 0.43 in)
from Huawei if
needed.
You are advised to
install an anti-
theft board
delivered with the
device to protect
the micro SD card.

USB port USB Type A USB port allows USB flash drive
you to insert an
USB flash drive
for system
software
upgrades. For
details on
upgrades through
USB flash drives,
refer to the
Upgrade Guide
delivered with the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 72

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Power Supply System

● Early delivery: The device has no built-in power modules and uses a 36 W
Power Adapter (02220947) or 36 W Power Adapter (02221468) for power
supply.
● Later delivery: The device has no built-in power modules and uses a 36 W
Power Adapter (02221468) for power supply.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Technical Specifications

Table 4-30 Technical specifications of the USG6530E

Item Specification

Installation Type ● Rack

● Work bench
● Against the wall

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 250 mm x 210 mm (1.72 in.

x D) [mm(in.)] x 9.84 in. x 8.27 in.)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 73

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Dimensions with packaging (H x W x 110 mm x 470 mm x 335 mm (4.33 in.

D) [mm(in.)] x 18.5 in. x 13.19 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 2.3 kg (5.07 lb)

Weight without packaging [kg(lb)] 1.57 kg (3.46 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.2 GHz

Memory DDR4 2 GB

NOR Flash ● USG6530E-AC (02352QVD): 32 MB

● USG6530E-AC (02352QVD-001): 64
MB
● USG6530E-AC (02352QVD-002): 64
MB

NAND Flash 2 GB

Hard disk Optional. Purchase one 64-GB micro

SD card from Huawei as required.

Console port RJ45

Maximum power consumption [W] 22.3 W

Maximum heat dissipation [BTU/hour] 76.08 BTU/hour

MTBF [years] 57.29 years

MTTR [hours] 2 hours

Power supply mode Power adapter external

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 264 V, 47 Hz to 63 Hz

Maximum input current [A] 1A

Maximum output power [W] 36 W

Types of fans None

Number of fan modules 0

Heat dissipation mode Has no fan and uses natural cooling.

Maximum number of 10GE ports 2

Maximum number of GE ports 2

Maximum number of electrical ports 10

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 74

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.6 USG6550E

Overview

Table 4-31 Basic information about the USG6550E

Description Part Number Model First supported

version

USG6550E AC 02352CBQ USG6550E-AC V600R006C00

Host (2*GE WAN
+ 8*GE Combo
+ 16*GE RJ45
+ 2*10GE SFP+,1
AC power)

Appearance

Figure 4-28 Appearance of the USG6550E (front view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 75

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-29 Appearance of the USG6550E (rear view)

Components

Figure 4-30 Components of the USG6550E

1. Product 2. Indicator 3. Fixed 4. Protective 5. MAC label

series ID and button interface area ground
area terminal

6. SN label 7. Fan module 8. Optional 9. Power -

power module module
slot

Table 4-32 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 76

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The slot number of the fan module is 4.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-31 Indicators and buttons on the USG6550E

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. Optical port

USB, HA, WAN port ACT port LINK ACT indicator LINK indicator
and CLOUD indicator indicator
indicators

6. MGMT port 7. RST button - - -

indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 77

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-33 Indicators on the USG6550E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 78

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Hot backup,

managing the
master device

Green Blinks once Hot backup,

every 2 managing the
seconds (0.5 slave device
Hz).

Red Steady on Dual-system

hot backup is
faulty.

- Off The dual-

system hot
backup
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 79

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 80

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-34 Buttons on the USG6550E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-32 Ports on the USG6550E

1. GE electrical 2. Combo port 3. 10GE optical 4. WAN port 5. SSD card

port port slot

6. USB 3.0 port 7. USB 2.0 port 8. Console port 9. MGMT port -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 81

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-35 Ports on the USG6550E

Port Connector Type Description Available
Components

GE electrical ports RJ45 16 10/100/1000M Ethernet Cable

(0 to 15) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/15.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 82

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Combo ports (16 RJ45 + SFP Combo ports. ● Ethernet

to 23) Combo ports are Cable
logic ports. One ● 1Gbps eSFP
combo port can Optical
work as a GE Modules
electrical interface
or a GE optical
port. Each combo
port has only one
internal
forwarding port.
When the
electrical port is
enabled, the
optical port is
disabled. When
the optical port is
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/16 to
GigabitEthernet
0/0/23. By
default, the
combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 83

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

10GE optical ports SFP+ 2 10GE 10Gbps SFP+

(0 to 1) autosensing Optical Modules
Ethernet optical
ports, numbered
from
XGigabitEthernet
0/0/0 to
XGigabitEthernet
0/0/1. Not
compatible with
GE optical
modules.

WAN ports (0 to RJ45 2 10/100/1000M Ethernet Cable

1) autosensing
Ethernet electrical
ports, numbered
from WAN 0/0/0
to WAN 0/0/1.
The device is
connected to the
WAN or cloud
management
center using a
network cable.

SSD card slot - The M.2 module Hard Disk Unit

is inserted to M.2-Sata240G-A
record logs and
reports in real
time. The M.2
module is
optional. You can
purchase the M.2
module as
required.

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 84

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

USB 2.0 port USB 2.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 85

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

The power supply system has one PAC60S12-R AC power module, but two power
modules can be configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system uses one FAN-023A-B module to dissipate heat for
the system. From the front panel, the device provides a front-to-rear air flow. The
fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 86

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-33 System air flow of the USG6550E

Technical Specifications

Table 4-36 Technical specifications of the USG6550E-AC

Item Specification

Installation Type ● Rack

● Work bench

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 220 mm x 550 mm x 530 mm (8.66 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 8.1 kg (17.86 lb)

Weight without packaging [kg(lb)] 5.71 kg (12.59 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.4 GHz

Memory DDR4 4 GB

NOR Flash 32 MB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 87

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

NAND Flash 2 GB

Hard disk Optional. M.2 SSD (240GB), hot-

swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 46.4 W

Maximum heat dissipation [BTU/hour] 158.7 BTU/hour

MTBF [years] 45.56 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 264 V, 47 Hz to 63 Hz

Types of fans Pluggable

Number of fan modules 1

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 2

Maximum number of GE ports 24

Maximum number of electrical ports 24

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 88

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.7 USG6555E

Overview

Table 4-37 Basic information about the USG6555E

Description Part Number Model First supported

version

USG6555E AC 02353AEK USG6555E-AC V600R007C00

Host (2*GE WAN
+8*GE Combo
+2*10GE SFP+,1
AC power)

USG6555E AC 02353AEK-001 USG6555E-AC V600R007C20SPC

Host(2*GE WAN 500
+8*GE Combo
+2*10GE SFP+,1
AC power)

USG6555E AC 02353AEK-004 USG6555E-AC V600R007C20SPC

Host(2*GE WAN 600
+8*GE Combo
+2*10GE SFP+,1
AC power)

Appearance
NOTE

The two USB ports of earlier-delivered models are USB 3.0 and USB 2.0 respectively,
whereas those of later-delivered models are both USB 2.0. In this document, earlier-
delivered models are used as examples.

Figure 4-34 Appearance of the USG6555E (front view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 89

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-35 Appearance of the USG6555E (rear view)

Components

Figure 4-36 Components of the USG6555E

1. Product 2. Indicator 3. Fixed 4. Protective 5. MAC label

series ID and button interface area ground
area terminal

6. SN label 7. Fan module 8. Optional 9. Power -

power module module
slot

Table 4-38 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 90

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The slot number of the fan module is 4.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-37 Indicators and buttons on the USG6555E

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. Optical port

USB, HA, WAN port ACT port LINK ACT indicator LINK indicator
and CLOUD indicator indicator
indicators

6. MGMT port 7. RST button - - -

indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 91

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-39 Indicators on the USG6555E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 92

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Hot backup,

managing the
master device

Green Blinks once Hot backup,

every 2 managing the
seconds (0.5 slave device
Hz).

Red Steady on Dual-system

hot backup is
faulty.

- Off The dual-

system hot
backup
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 93

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 94

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-40 Buttons on the USG6555E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-38 Ports on the USG6555E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 95

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. Combo port 2. 10GE optical 3. WAN port 4. SSD card 5. USB 3.0 port
port slot or USB0
NOTE
● Earlier-
delivered
models:
USB 3.0
● Later-
delivered
models:
USB0 (USB
2.0)

6. USB 2.0 port 7. Console port 8. MGMT port - -

or USB1
NOTE
● Earlier-
delivered
models:
USB 2.0
● Later-
delivered
models:
USB1 (USB
2.0)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 96

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-41 Ports on the USG6555E

Port Connector Type Description Available
Components

Combo ports (0 to RJ45 + SFP Combo ports. ● Ethernet

7) Combo ports are Cable
logic ports. One ● 100Mbps SFP
combo port can Optical
work as a GE Modules
electrical interface
or a GE optical ● 1Gbps eSFP
port. Each combo Optical
port has only one Modules
internal NOTE
forwarding port. In
V600R007C20SPC5
When the 00 and later
electrical port is versions, Combo
enabled, the ports support
optical port is 100Mbps SFP
disabled. When Optical Modules.
the optical port is
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/7. By default,
the combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 97

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

10GE optical ports SFP+ 2 10GE optical ● 1Gbps SFP

(0 to 1) ports, numbered Copper
from Modules
XGigabitEthernet ● 1Gbps eSFP
0/0/0 to Optical
XGigabitEthernet Modules
0/0/1.
● 10Gbps SFP+
NOTE
Optical
In V600R007C20
and later versions, Modules
10GE optical ports
support 1Gbps SFP
Copper Modules
and 1Gbps eSFP
Optical Modules.
By default, the rate
of 10GE optical
ports are 10GE.
You can run the
set device port-
config-mode
[ 10ge | ge ]
command to set
the rate of 10GE
optical ports are to
10GE or GE as
required.

WAN ports (0 to RJ45 2 10/100/1000M Ethernet Cable

1) autosensing
Ethernet electrical
ports, numbered
from WAN 0/0/0
to WAN 0/0/1.
The device is
connected to the
WAN or cloud
management
center using a
network cable.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 98

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

SSD card slot - The M.2 module Hard Disk Unit

is inserted to M.2-Sata240G-A
record logs and
reports in real
time. The M.2
module is
optional. You can
purchase the M.2
module as
required.

USB 3.0 port or USB Type A USB port allows USB flash drive
USB0 you to insert an
USB flash drive
for system
software
upgrades. For
details on
upgrades through
USB flash drives,
refer to the
Upgrade Guide
delivered with the
device.

USB 2.0 port or USB Type A USB ports allow USB flash drive
USB1 you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 99

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 100

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

● Early delivery: The power supply system has one PAC60S12-AR, PAC60S12-R,
or PAC600S12-CB AC power module. Two power modules can be configured
for 1+1 power redundancy.
● Later delivery: The power supply system has one PAC60S12-AR AC power
module. Two power modules can be configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system uses one FAN-023A-B module to dissipate heat for
the system. From the front panel, the device provides a front-to-rear air flow. The
fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 101

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-39 System air flow of the USG6555E

Technical Specifications

Table 4-42 Technical specifications of the USG6555E

Item Specification

Installation Type ● Rack

● Work bench

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 220 mm x 550 mm x 530 mm (8.66 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] ● USG6555E-AC (02353AEK): 8.75 kg

(19.29 lb)
● USG6555E-AC (02353AEK-001):
7.93 kg (17.48 lb)
● USG6555E-AC (02353AEK-004):
7.93 kg (17.48 lb)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 102

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Weight without packaging [kg(lb)] ● USG6555E-AC (02353AEK): 5.8 kg

(12.79 lb)
● USG6555E-AC (02353AEK-001):
5.95 kg (13.12 lb)
● USG6555E-AC (02353AEK-004):
5.95 kg (13.12 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.4 GHz

Memory DDR4 4 GB

NOR Flash ● USG6555E-AC (02353AEK):

32 MB
NOTE
The NOR flash memory size of devices
delivered later is 64 MB. You can run
the display version command to check
the NOR flash memory size.
● USG6555E-AC (02353AEK-001):
32 MB
NOTE
The NOR flash memory size of devices
delivered later is 64 MB. You can run
the display version command to check
the NOR flash memory size.
● USG6555E-AC (02353AEK-004):
32 MB
NOTE
The specification of the NOR flash of
the device to be delivered is 64 MB. You
can run the display version command
to view the NOR flash memory
specification of a device.

NAND Flash 2 GB

Hard disk Optional. M.2 SSD (240GB), hot-

swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] ● USG6555E-AC (02353AEK): 40 W

● USG6555E-AC (02353AEK-001):
45.3 W
● USG6555E-AC (02353AEK-004):
45.3 W

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 103

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Maximum heat dissipation [BTU/hour] ● USG6555E-AC (02353AEK): 136.8

BTU/hour
● USG6555E-AC (02353AEK-001):
154.4 BTU/hour
● USG6555E-AC (02353AEK-004):
154.4 BTU/hour

MTBF [years] 68.98 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Types of fans Pluggable

Number of fan modules 1

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 2

Maximum number of GE ports 8

Maximum number of electrical ports 8

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 104

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.8 USG6560E

Overview

Table 4-43 Basic information about the USG6560E

Description Part Number Model First supported
version

USG6560E AC 02352CBR USG6560E-AC V600R006C00

Host (2*GE WAN
+ 8*GE Combo
+ 16*GE RJ45
+ 2*10GE SFP+,1
AC power)

Appearance

Figure 4-40 Appearance of the USG6560E (front view)

Figure 4-41 Appearance of the USG6560E (rear view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 105

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Components

Figure 4-42 Components of the USG6560E

1. Product 2. Indicator 3. Fixed 4. Protective 5. MAC label

series ID and button interface area ground
area terminal

6. SN label 7. Fan module 8. Optional 9. Power -

power module module
slot

Table 4-44 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 106

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The slot number of the fan module is 4.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-43 Indicators and buttons on the USG6560E

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. Optical port

USB, HA, WAN port ACT port LINK ACT indicator LINK indicator
and CLOUD indicator indicator
indicators

6. MGMT port 7. RST button - - -

indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 107

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-45 Indicators on the USG6560E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 108

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Hot backup,

managing the
master device

Green Blinks once Hot backup,

every 2 managing the
seconds (0.5 slave device
Hz).

Red Steady on Dual-system

hot backup is
faulty.

- Off The dual-

system hot
backup
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 109

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 110

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-46 Buttons on the USG6560E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-44 Ports on the USG6560E

1. GE electrical 2. Combo port 3. 10GE optical 4. WAN port 5. SSD card

port port slot

6. USB 3.0 port 7. USB 2.0 port 8. Console port 9. MGMT port -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 111

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-47 Ports on the USG6560E

Port Connector Type Description Available
Components

GE electrical ports RJ45 16 10/100/1000M Ethernet Cable

(0 to 15) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/15.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 112

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Combo ports (16 RJ45 + SFP Combo ports. ● Ethernet

to 23) Combo ports are Cable
logic ports. One ● 1Gbps eSFP
combo port can Optical
work as a GE Modules
electrical interface
or a GE optical
port. Each combo
port has only one
internal
forwarding port.
When the
electrical port is
enabled, the
optical port is
disabled. When
the optical port is
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/16 to
GigabitEthernet
0/0/23. By
default, the
combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 113

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

10GE optical ports SFP+ 2 10GE 10Gbps SFP+

(0 to 1) autosensing Optical Modules
Ethernet optical
ports, numbered
from
XGigabitEthernet
0/0/0 to
XGigabitEthernet
0/0/1. Not
compatible with
GE optical
modules.

WAN ports (0 to RJ45 2 10/100/1000M Ethernet Cable

1) autosensing
Ethernet electrical
ports, numbered
from WAN 0/0/0
to WAN 0/0/1.
The device is
connected to the
WAN or cloud
management
center using a
network cable.

SSD card slot - The M.2 module Hard Disk Unit

is inserted to M.2-Sata240G-A
record logs and
reports in real
time. The M.2
module is
optional. You can
purchase the M.2
module as
required.

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 114

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

USB 2.0 port USB 2.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 115

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

The power supply system has one PAC60S12-R AC power module, but two power
modules can be configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system uses one FAN-023A-B module to dissipate heat for
the system. From the front panel, the device provides a front-to-rear air flow. The
fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 116

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-45 System air flow of the USG6560E

Technical Specifications

Table 4-48 Technical specifications of the USG6560E-AC

Item Specification

Installation Type ● Rack

● Work bench

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 220 mm x 550 mm x 530 mm (8.66 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 8.1 kg (17.86 lb)

Weight without packaging [kg(lb)] 5.71 kg (12.59 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.4 GHz

Memory DDR4 4 GB

NOR Flash 32 MB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 117

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

NAND Flash 2 GB

Hard disk Optional. M.2 SSD (240GB), hot-

swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 46.4 W

Maximum heat dissipation [BTU/hour] 158.7 BTU/hour

MTBF [years] 45.56 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 264 V, 47 Hz to 63 Hz

Types of fans Pluggable

Number of fan modules 1

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 2

Maximum number of GE ports 24

Maximum number of electrical ports 24

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 118

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.9 USG6565E

Overview

Table 4-49 Basic information about the USG6565E

Description Part Number Model First supported

version

USG6565E AC 02353AEJ USG6565E-AC V600R007C00

Host (2*GE WAN
+8*GE Combo
+2*10GE SFP+,1
AC power)

USG6565E AC 02353AEJ-001 USG6565E-AC V600R007C20SPC

Host(2*GE WAN 500
+8*GE Combo
+2*10GE SFP+,1
AC power)

USG6565E AC 02353AEJ-002 USG6565E-AC V600R007C20SPC

Host(2*GE WAN 600
+8*GE Combo
+2*10GE SFP+,1
AC power)

Appearance
NOTE

The two USB ports of earlier-delivered models are USB 3.0 and USB 2.0 respectively,
whereas those of later-delivered models are both USB 2.0. In this document, earlier-
delivered models are used as examples.

Figure 4-46 Appearance of the USG6565E (front view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 119

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-47 Appearance of the USG6565E (rear view)

Components

Figure 4-48 Components of the USG6565E

1. Product 2. Indicator 3. Fixed 4. Protective 5. MAC label

series ID and button interface area ground
area terminal

6. SN label 7. Fan module 8. Optional 9. Power -

power module module
slot

Table 4-50 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 120

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The slot number of the fan module is 4.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-49 Indicators and buttons on the USG6565E

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. Optical port

USB, HA, WAN port ACT port LINK ACT indicator LINK indicator
and CLOUD indicator indicator
indicators

6. MGMT port 7. RST button - - -

indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 121

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-51 Indicators on the USG6565E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 122

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Hot backup,

managing the
master device

Green Blinks once Hot backup,

every 2 managing the
seconds (0.5 slave device
Hz).

Red Steady on Dual-system

hot backup is
faulty.

- Off The dual-

system hot
backup
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 123

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 124

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-52 Buttons on the USG6565E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-50 Ports on the USG6565E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 125

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. Combo port 2. 10GE optical 3. WAN port 4. SSD card 5. USB 3.0 port
port slot or USB0
NOTE
● Earlier-
delivered
models:
USB 3.0
● Later-
delivered
models:
USB0 (USB
2.0)

6. USB 2.0 port 7. Console port 8. MGMT port - -

or USB1
NOTE
● Earlier-
delivered
models:
USB 2.0
● Later-
delivered
models:
USB1 (USB
2.0)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 126

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-53 Ports on the USG6565E

Port Connector Type Description Available
Components

Combo ports (0 to RJ45 + SFP Combo ports. ● Ethernet

7) Combo ports are Cable
logic ports. One ● 100Mbps SFP
combo port can Optical
work as a GE Modules
electrical interface
or a GE optical ● 1Gbps eSFP
port. Each combo Optical
port has only one Modules
internal NOTE
forwarding port. In
V600R007C20SPC5
When the 00 and later
electrical port is versions, Combo
enabled, the ports support
optical port is 100Mbps SFP
disabled. When Optical Modules.
the optical port is
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/7. By default,
the combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 127

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

10GE optical ports SFP+ 2 10GE optical ● 1Gbps SFP

(0 to 1) ports, numbered Copper
from Modules
XGigabitEthernet ● 1Gbps eSFP
0/0/0 to Optical
XGigabitEthernet Modules
0/0/1.
● 10Gbps SFP+
NOTE
Optical
In V600R007C20
and later versions, Modules
10GE optical ports
support 1Gbps SFP
Copper Modules
and 1Gbps eSFP
Optical Modules.
By default, the rate
of 10GE optical
ports are 10GE.
You can run the
set device port-
config-mode
[ 10ge | ge ]
command to set
the rate of 10GE
optical ports are to
10GE or GE as
required.

WAN ports (0 to RJ45 2 10/100/1000M Ethernet Cable

1) autosensing
Ethernet electrical
ports, numbered
from WAN 0/0/0
to WAN 0/0/1.
The device is
connected to the
WAN or cloud
management
center using a
network cable.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 128

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

SSD card slot - The M.2 module Hard Disk Unit

is inserted to M.2-Sata240G-A
record logs and
reports in real
time. The M.2
module is
optional. You can
purchase the M.2
module as
required.

USB 3.0 port or USB Type A USB port allows USB flash drive
USB0 you to insert an
USB flash drive
for system
software
upgrades. For
details on
upgrades through
USB flash drives,
refer to the
Upgrade Guide
delivered with the
device.

USB 2.0 port or USB Type A USB ports allow USB flash drive
USB1 you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 129

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 130

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

● Early delivery: The power supply system has one PAC60S12-AR, PAC60S12-R,
or PAC600S12-CB AC power module. Two power modules can be configured
for 1+1 power redundancy.
● Later delivery: The power supply system has one PAC60S12-AR AC power
module. Two power modules can be configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system uses one FAN-023A-B module to dissipate heat for
the system. From the front panel, the device provides a front-to-rear air flow. The
fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 131

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-51 System air flow of the USG6565E

Technical Specifications

Table 4-54 Technical specifications of the USG6565E

Item Specification

Installation Type ● Rack

● Work bench

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 220 mm x 550 mm x 530 mm (8.66 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] ● USG6565E-AC (02353AEJ): 8.75 kg

(19.29 lb)
● USG6565E-AC (02353AEJ-001): 7.93
kg (17.48 lb)
● USG6565E-AC (02353AEJ-002): 7.93
kg (17.48 lb)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 132

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Weight without packaging [kg(lb)] ● USG6565E-AC (02353AEJ): 5.8 kg

(12.79 lb)
● USG6565E-AC (02353AEJ-001): 5.95
kg (13.12 lb)
● USG6565E-AC (02353AEJ-002): 5.95
kg (13.12 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.4 GHz

Memory DDR4 4 GB

NOR Flash ● USG6565E-AC (02353AEJ):

32 MB
NOTE
The NOR flash memory size of devices
delivered later is 64 MB. You can run
the display version command to check
the NOR flash memory size.
● USG6565E-AC (02353AEJ-001):
32 MB
NOTE
The NOR flash memory size of devices
delivered later is 64 MB. You can run
the display version command to check
the NOR flash memory size.
● USG6565E-AC (02353AEJ-002):
32 MB
NOTE
The specification of the NOR flash of
the device to be delivered is 64 MB. You
can run the display version command
to view the NOR flash memory
specification of a device.

NAND Flash 2 GB

Hard disk Optional. M.2 SSD (240GB), hot-

swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] ● USG6565E-AC (02353AEJ): 40 W

● USG6565E-AC (02353AEJ-001): 45.3
W
● USG6565E-AC (02353AEJ-002): 45.3
W

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 133

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Maximum heat dissipation [BTU/hour] ● USG6565E-AC (02353AEJ): 136.8

BTU/hour
● USG6565E-AC (02353AEJ-001):
154.4 BTU/hour
● USG6565E-AC (02353AEJ-002):
154.4 BTU/hour

MTBF [years] 68.98 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Types of fans Pluggable

Number of fan modules 1

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 2

Maximum number of GE ports 8

Maximum number of electrical ports 8

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 134

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.10 USG6575E-B

Overview

Table 4-55 Basic information about the USG6575E-B

Description Part Number Model First supported
version

USG6575E-B AC 02353LKD USG6575E-B-AC V600R007C20

Host (16*GE
RJ45+8*GE Combo
+2*10GE SFP+,1
AC Power)

USG6575E-B AC 02353LKD-002 USG6575E-B-AC V600R007C20SPC

Host(16*GE 600
RJ45+8*GE Combo
+2*10GE SFP+,1
AC Power)

Appearance
NOTE

The standard USB port of the earlier-delivered models is USB 3.0, and that of the later-
delivered models is USB 2.0. This document uses a model with a USB 3.0 port as an
example.

Figure 4-52 Appearance of the USG6575E-B (front view)

Figure 4-53 Appearance of the USG6575E-B (rear view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 135

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Components

Figure 4-54 Components of the USG6575E-B

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Optional 10. Power

power module module
slot

Table 4-56 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 136

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN2, and the corresponding slot numbers are 4 and 5
respectively.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-55 Indicators and buttons on the USG6575E-B

1. PWR, SYS, 2. OFL 3. BLE 4. BYPASS 0 5. BYPASS 1

USB, HA, WAN indicator indicator indicator indicator
and CLOUD
indicators

6. GE electrical 7. GE electrical 8. Optical port 9. Optical port 10. MGMT

port ACT port LINK ACT indicator LINK indicator port indicator
indicator indicator

11. RST button 12. OFL button - - -

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 137

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-57 Indicators on the USG6575E-B

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 138

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Hot backup,

managing the
master device

Green Blinks once Hot backup,

every 2 managing the
seconds (0.5 slave device
Hz).

Red Steady on Dual-system

hot backup is
faulty.

- Off The dual-

system hot
backup
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 139

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- OFL indicator Green Steady on The hard disk

can be
removed.

- Off The hard disk

cannot be
removed.

BLE - Off Reserved

function. This
function is
not enabled.

Bypass Bypass Green Steady on Device is

indicator 0 powered on.
The bypass
formed by
GigabitEthern
et0/0/20 and
GigabitEthern
et0/0/21 is in
protection
state.

Green Blinks once Device is

every 2 powered on.
seconds (0.5 The bypass
Hz). formed by
GigabitEthern
et0/0/20 and
GigabitEthern
et0/0/21 is in
working state.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 140

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off Device is
powered off.
The bypass
formed by
GigabitEthern
et0/0/20 and
GigabitEthern
et0/0/21 is in
protection
state.

Bypass Bypass Green Steady on Device is

indicator 1 powered on.
The bypass
formed by
GigabitEthern
et0/0/22 and
GigabitEthern
et0/0/23 is in
protection
state.

Green Blinks once Device is

every 2 powered on.
seconds (0.5 The bypass
Hz). formed by
GigabitEthern
et0/0/22 and
GigabitEthern
et0/0/23 is in
working state.

- Off Device is
powered off.
The bypass
formed by
GigabitEthern
et0/0/22 and
GigabitEthern
et0/0/23 is in
protection
state.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 141

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 142

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-58 Buttons on the USG6575E-B

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-56 Ports on the USG6575E-B

1. HDD/SSD 2. GE electrical 3. Combo port 4. 10GE optical 5. USB port

slot port port
NOTE
● Earlier-
delivered
models:
USB 3.0
● Later-
delivered
models:
USB 2.0

6. Console port 7. MGMT port - - -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 143

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-59 Ports on the USG6575E-B

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

GE electrical ports RJ45 16 10/100/1000M Ethernet Cable

(0 to 15) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/15.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 144

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Combo ports (16 RJ45 + SFP Combo ports are ● Ethernet

to 23) logic ports. One Cable
combo port can ● 100Mbps SFP
work as a GE Optical
electrical port or a Modules
GE optical port.
Each combo port ● 1Gbps eSFP
has only one Optical
internal Modules
forwarding port. NOTE
When the In
V600R007C20SPC5
electrical port is 00 and later
enabled, the versions, Combo
optical port is ports support
disabled. When 100Mbps SFP
the optical port is Optical Modules.
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/16 to
GigabitEthernet
0/0/23.
Among the four
GE ports from
GigabitEthernet0/
0/20 to
GigabitEthernet0/
0/23,
GigabitEthernet0/
0/20 and
GigabitEthernet0/
0/21 are a pair of
two bypass
interfaces, and
GigabitEthernet0/
0/22 and
GigabitEthernet0/
0/23 are another
pair. When the
interfaces of each
bypass interface
pair work at Layer

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 145

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

2, they can form

an electrical
bypass link.By
default, the
combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.
NOTE
A bypass link can
be established only
when
GigabitEthernet0/0
/20 to
GigabitEthernet0/0
/23 work as
electrical ports.
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 146

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

10GE optical ports SFP+ 2 GE/10GE ● 1Gbps SFP

(0 to 1) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/1. Optical
Modules
NOTE
In
V600R007C20SPC3
00 and later
versions, 10GE
optical ports
support 1Gbps SFP
Copper Modules
and 1Gbps eSFP
Optical Modules.

USB port USB Type A USB port allows USB flash drive
you to insert an
USB flash drive
for system
software
upgrades. For
details on
upgrades through
USB flash drives,
refer to the
Upgrade Guide
delivered with the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 147

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 148

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

The power supply system has one PAC150S12-R AC power module, but two power
modules can be configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system consists of two FAN-023A-B modules working in 1+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 149

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-57 System air flow of the USG6575E-B

Technical Specifications

Table 4-60 Technical specifications of the USG6575E-B

Item Specification

Installation Type ● Rack

● Work bench

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 175 mm x 650 mm x 550 mm (6.89 in.

D) [mm(in.)] x 25.59 in. x 21.65 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 8.25 kg (18.19 lb)

Weight without packaging [kg(lb)] 6.25 kg (13.78 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.4 GHz

Memory DDR4 8 GB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 150

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

NOR Flash ● USG6575E-B-AC (02353LKD): 64MB

● USG6575E-B-AC (02353LKD-002):
64 MB

NAND Flash 2 GB

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 76.9 W

Maximum heat dissipation [BTU/hour] 262.38 BTU/hour

MTBF [years] 41.89 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 264 V, 47 Hz to 63 Hz

Maximum input current [A] 3A

Rated output power [W] 150W/12V

Maximum output power [W] 150 W

Types of fans Pluggable

Number of fan modules 2

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 2

Maximum number of GE ports 8

Maximum number of electrical ports 24

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 151

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Redundant fans 1+1

Noise at normal temperature (acoustic ≤55dbA

power) [db(A)]

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

4.1.11 USG6580E

Overview

Table 4-61 Basic information about the USG6580E

Description Part Number Model First supported
version

USG6580E AC 02352CBS USG6580E-AC V600R006C00

Host (2*GE WAN
+ 8*GE Combo
+ 16*GE RJ45
+ 2*10GE SFP+,1
AC power)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 152

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-58 Appearance of the USG6580E (front view)

Figure 4-59 Appearance of the USG6580E (rear view)

Components

Figure 4-60 Components of the USG6580E

1. Product 2. Indicator 3. Fixed 4. Protective 5. MAC label

series ID and button interface area ground
area terminal

6. SN label 7. Fan module 8. Optional 9. Power -

power module module
slot

Table 4-62 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 153

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The slot number of the fan module is 4.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-61 Indicators and buttons on the USG6580E

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. Optical port

USB, HA, WAN port ACT port LINK ACT indicator LINK indicator
and CLOUD indicator indicator
indicators

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 154

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

6. MGMT port 7. RST button - - -

indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Table 4-63 Indicators on the USG6580E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 155

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Hot backup,

managing the
master device

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 156

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinks once Hot backup,

every 2 managing the
seconds (0.5 slave device
Hz).

Red Steady on Dual-system

hot backup is
faulty.

- Off The dual-

system hot
backup
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 157

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 158

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-64 Buttons on the USG6580E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-62 Ports on the USG6580E

1. GE electrical 2. Combo port 3. 10GE optical 4. WAN port 5. SSD card

port port slot

6. USB 3.0 port 7. USB 2.0 port 8. Console port 9. MGMT port -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 159

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-65 Ports on the USG6580E

Port Connector Type Description Available
Components

GE electrical ports RJ45 16 10/100/1000M Ethernet Cable

(0 to 15) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/15.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 160

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Combo ports (16 RJ45 + SFP Combo ports. ● Ethernet

to 23) Combo ports are Cable
logic ports. One ● 1Gbps eSFP
combo port can Optical
work as a GE Modules
electrical interface
or a GE optical
port. Each combo
port has only one
internal
forwarding port.
When the
electrical port is
enabled, the
optical port is
disabled. When
the optical port is
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/16 to
GigabitEthernet
0/0/23. By
default, the
combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 161

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

10GE optical ports SFP+ 2 10GE 10Gbps SFP+

(0 to 1) autosensing Optical Modules
Ethernet optical
ports, numbered
from
XGigabitEthernet
0/0/0 to
XGigabitEthernet
0/0/1. Not
compatible with
GE optical
modules.

WAN ports (0 to RJ45 2 10/100/1000M Ethernet Cable

1) autosensing
Ethernet electrical
ports, numbered
from WAN 0/0/0
to WAN 0/0/1.
The device is
connected to the
WAN or cloud
management
center using a
network cable.

SSD card slot - The M.2 module Hard Disk Unit

is inserted to M.2-Sata240G-A
record logs and
reports in real
time. The M.2
module is
optional. You can
purchase the M.2
module as
required.

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 162

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

USB 2.0 port USB 2.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 163

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

The power supply system has one PAC60S12-R AC power module, but two power
modules can be configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system uses one FAN-023A-B module to dissipate heat for
the system. From the front panel, the device provides a front-to-rear air flow. The
fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 164

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-63 System air flow of the USG6580E

Technical Specifications

Table 4-66 Technical specifications of the USG6580E-AC

Item Specification

Installation Type ● Rack

● Work bench

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 220 mm x 550 mm x 530 mm (8.66 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 8.1 kg (17.86 lb)

Weight without packaging [kg(lb)] 5.71 kg (12.59 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.4 GHz

Memory DDR4 4 GB

NOR Flash 32 MB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 165

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

NAND Flash 2 GB

Hard disk Optional. M.2 SSD (240GB), hot-

swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 46.4 W

Maximum heat dissipation [BTU/hour] 158.7 BTU/hour

MTBF [years] 45.56 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 264 V, 47 Hz to 63 Hz

Types of fans Pluggable

Number of fan modules 1

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 2

Maximum number of GE ports 24

Maximum number of electrical ports 24

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 166

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.12 USG6585E

Overview

Table 4-67 Basic information about the USG6585E

Description Part Number Model First supported

version

USG6585E AC 02353ADA USG6585E-AC V600R007C00

Host (2*GE WAN
+8*GE Combo
+2*10GE SFP+,1
AC power)

USG6585E AC 02353ADA-001 USG6585E-AC V600R007C20SPC

Host(2*GE WAN 500
+8*GE Combo
+2*10GE SFP+,1
AC power)

USG6585E AC 02353ADA-002 USG6585E-AC V600R007C20SPC

Host(2*GE WAN 600
+8*GE Combo
+2*10GE SFP+,1
AC power)

Appearance
NOTE

The two USB ports of earlier-delivered models are USB 3.0 and USB 2.0 respectively,
whereas those of later-delivered models are both USB 2.0. In this document, earlier-
delivered models are used as examples.

Figure 4-64 Appearance of the USG6585E (front view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 167

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-65 Appearance of the USG6585E (rear view)

Components

Figure 4-66 Components of the USG6585E

1. Product 2. Indicator 3. Fixed 4. Protective 5. MAC label

series ID and button interface area ground
area terminal

6. SN label 7. Fan module 8. Optional 9. Power -

power module module
slot

Table 4-68 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 168

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The slot number of the fan module is 4.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-67 Indicators and buttons on the USG6585E

1. PWR, SYS, 2. GE electrical 3. GE electrical 4. Optical port 5. Optical port

USB, HA, WAN port ACT port LINK ACT indicator LINK indicator
and CLOUD indicator indicator
indicators

6. MGMT port 7. RST button - - -

indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 169

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-69 Indicators on the USG6585E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 170

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Hot backup,

managing the
master device

Green Blinks once Hot backup,

every 2 managing the
seconds (0.5 slave device
Hz).

Red Steady on Dual-system

hot backup is
faulty.

- Off The dual-

system hot
backup
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 171

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 172

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-70 Buttons on the USG6585E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Ports

Figure 4-68 Ports on the USG6585E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 173

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. Combo port 2. 10GE optical 3. WAN port 4. SSD card 5. USB 3.0 port
port slot or USB0
NOTE
● Earlier-
delivered
models:
USB 3.0
● Later-
delivered
models:
USB0 (USB
2.0)

6. USB 2.0 port 7. Console port 8. MGMT port - -

or USB1
NOTE
● Earlier-
delivered
models:
USB 2.0
● Later-
delivered
models:
USB1 (USB
2.0)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 174

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-71 Ports on the USG6585E

Port Connector Type Description Available
Components

Combo ports (0 to RJ45 + SFP Combo ports. ● Ethernet

7) Combo ports are Cable
logic ports. One ● 100Mbps SFP
combo port can Optical
work as a GE Modules
electrical interface
or a GE optical ● 1Gbps eSFP
port. Each combo Optical
port has only one Modules
internal NOTE
forwarding port. In
V600R007C20SPC5
When the 00 and later
electrical port is versions, Combo
enabled, the ports support
optical port is 100Mbps SFP
disabled. When Optical Modules.
the optical port is
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/7. By default,
the combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 175

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

10GE optical ports SFP+ 2 10GE optical ● 1Gbps SFP

(0 to 1) ports, numbered Copper
from Modules
XGigabitEthernet ● 1Gbps eSFP
0/0/0 to Optical
XGigabitEthernet Modules
0/0/1.
● 10Gbps SFP+
NOTE
Optical
In V600R007C20
and later versions, Modules
10GE optical ports
support 1Gbps SFP
Copper Modules
and 1Gbps eSFP
Optical Modules.
By default, the rate
of 10GE optical
ports are 10GE.
You can run the
set device port-
config-mode
[ 10ge | ge ]
command to set
the rate of 10GE
optical ports are to
10GE or GE as
required.

WAN ports (0 to RJ45 2 10/100/1000M Ethernet Cable

1) autosensing
Ethernet electrical
ports, numbered
from WAN 0/0/0
to WAN 0/0/1.
The device is
connected to the
WAN or cloud
management
center using a
network cable.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 176

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

SSD card slot - The M.2 module Hard Disk Unit

is inserted to M.2-Sata240G-A
record logs and
reports in real
time. The M.2
module is
optional. You can
purchase the M.2
module as
required.

USB 3.0 port or USB Type A USB port allows USB flash drive
USB0 you to insert an
USB flash drive
for system
software
upgrades. For
details on
upgrades through
USB flash drives,
refer to the
Upgrade Guide
delivered with the
device.

USB 2.0 port or USB Type A USB ports allow USB flash drive
USB1 you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 177

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 178

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

● Early delivery: The power supply system has one PAC60S12-AR, PAC60S12-R,
or PAC600S12-CB AC power module. Two power modules can be configured
for 1+1 power redundancy.
● Later delivery: The power supply system has one PAC60S12-AR AC power
module. Two power modules can be configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system uses one FAN-023A-B module to dissipate heat for
the system. From the front panel, the device provides a front-to-rear air flow. The
fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 179

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-69 System air flow of the USG6585E

Technical Specifications

Table 4-72 Technical specifications of the USG6585E

Item Specification

Installation Type ● Rack

● Work bench

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 220 mm x 550 mm x 530 mm (8.66 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] ● USG6585E-AC (02353ADA): 8.75 kg

(19.29 lb)
● USG6585E-AC (02353ADA-001):
7.93 kg (17.48 lb)
● USG6585E-AC (02353ADA-002):
7.93 kg (17.48 lb)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 180

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Weight without packaging [kg(lb)] ● USG6585E-AC (02353ADA): 5.8 kg

(12.79 lb)
● USG6585E-AC (02353ADA-001):
5.95 kg (13.12 lb)
● USG6585E-AC (02353ADA-002):
5.95 kg (13.12 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.4 GHz

Memory DDR4 4 GB

NOR Flash ● USG6585E-AC (02353ADA):

32 MB
NOTE
The NOR flash memory size of devices
delivered later is 64 MB. You can run
the display version command to check
the NOR flash memory size.
● USG6585E-AC (02353ADA-001):
32 MB
NOTE
The NOR flash memory size of devices
delivered later is 64 MB. You can run
the display version command to check
the NOR flash memory size.
● USG6585E-AC (02353ADA-002):
32 MB
NOTE
The specification of the NOR flash of
the device to be delivered is 64 MB. You
can run the display version command
to view the NOR flash memory
specification of a device.

NAND Flash 2 GB

Hard disk Optional. M.2 SSD (240GB), hot-

swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] ● USG6585E-AC (02353ADA): 40 W

● USG6585E-AC (02353ADA-001):
45.3 W
● USG6585E-AC (02353ADA-002):
45.3 W

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 181

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Maximum heat dissipation [BTU/hour] ● USG6585E-AC (02353ADA): 136.8

BTU/hour
● USG6585E-AC (02353ADA-001):
154.4 BTU/hour
● USG6585E-AC (02353ADA-002):
154.4 BTU/hour

MTBF [years] 68.98 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Types of fans Pluggable

Number of fan modules 1

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 2

Maximum number of GE ports 8

Maximum number of electrical ports 8

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Long-term operating temperature 0°C to 45°C

[°C(°F)]

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] 0 m to 5000 m

Storage altitude [m(ft.)] 0 m to 5000 m

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 182

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.

4.1.13 USG6605E-B

Overview

Table 4-73 Basic information about the USG6605E-B

Description Part Number Model First supported
version

USG6605E-B AC 02353PSK USG6605E-B-AC V600R007C20

Host (16*GE RJ45
+ 8*GE Combo
+2*10GE SFP+,1
AC POWER)

USG6605E-B AC 02353PSK-001 USG6605E-B-AC V600R007C20SPC

Host(16*GE 600
RJ45+8*GE Combo
+2*10GE SFP+,1
AC Power)

Appearance
NOTE

The standard USB port of the earlier-delivered models is USB 3.0, and that of the later-
delivered models is USB 2.0. This document uses a model with a USB 3.0 port as an
example.

Figure 4-70 Appearance of the USG6605E-B (front view)

Figure 4-71 Appearance of the USG6605E-B (rear view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 183

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Components

Figure 4-72 Components of the USG6605E-B

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Optional 10. Power

power module module
slot

Table 4-74 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 184

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN2, and the corresponding slot numbers are 4 and 5
respectively.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-73 Indicators and buttons on the USG6605E-B

1. PWR, SYS, 2. OFL 3. BLE 4. BYPASS 0 5. BYPASS 1

USB, HA, WAN indicator indicator indicator indicator
and CLOUD
indicators

6. GE electrical 7. GE electrical 8. Optical port 9. Optical port 10. MGMT

port ACT port LINK ACT indicator LINK indicator port indicator
indicator indicator

11. RST button 12. OFL button - - -

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 185

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-75 Indicators on the USG6605E-B

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 186

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Hot backup,

managing the
master device

Green Blinks once Hot backup,

every 2 managing the
seconds (0.5 slave device
Hz).

Red Steady on Dual-system

hot backup is
faulty.

- Off The dual-

system hot
backup
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 187

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- OFL indicator Green Steady on The hard disk

can be
removed.

- Off The hard disk

cannot be
removed.

BLE - Off Reserved

function. This
function is
not enabled.

Bypass Bypass Green Steady on Device is

indicator 0 powered on.
The bypass
formed by
GigabitEthern
et0/0/20 and
GigabitEthern
et0/0/21 is in
protection
state.

Green Blinks once Device is

every 2 powered on.
seconds (0.5 The bypass
Hz). formed by
GigabitEthern
et0/0/20 and
GigabitEthern
et0/0/21 is in
working state.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 188

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off Device is
powered off.
The bypass
formed by
GigabitEthern
et0/0/20 and
GigabitEthern
et0/0/21 is in
protection
state.

Bypass Bypass Green Steady on Device is

indicator 1 powered on.
The bypass
formed by
GigabitEthern
et0/0/22 and
GigabitEthern
et0/0/23 is in
protection
state.

Green Blinks once Device is

every 2 powered on.
seconds (0.5 The bypass
Hz). formed by
GigabitEthern
et0/0/22 and
GigabitEthern
et0/0/23 is in
working state.

- Off Device is
powered off.
The bypass
formed by
GigabitEthern
et0/0/22 and
GigabitEthern
et0/0/23 is in
protection
state.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 189

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 190

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-76 Buttons on the USG6605E-B

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-74 Ports on the USG6605E-B

1. HDD/SSD 2. GE electrical 3. Combo port 4. 10GE optical 5. USB port

slot port port
NOTE
● Earlier-
delivered
models:
USB 3.0
● Later-
delivered
models:
USB 2.0

6. Console port 7. MGMT port - - -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 191

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-77 Ports on the USG6605E-B

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

GE electrical ports RJ45 16 10/100/1000M Ethernet Cable

(0 to 15) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/15.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 192

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Combo ports (16 RJ45 + SFP Combo ports are ● Ethernet

to 23) logic ports. One Cable
combo port can ● 100Mbps SFP
work as a GE Optical
electrical port or a Modules
GE optical port.
Each combo port ● 1Gbps eSFP
has only one Optical
internal Modules
forwarding port. NOTE
When the In
V600R007C20SPC5
electrical port is 00 and later
enabled, the versions, Combo
optical port is ports support
disabled. When 100Mbps SFP
the optical port is Optical Modules.
enabled, the
electrical port is
disabled. The
electrical and
optical ports of a
combo port use
the same
interface view,
numbered from
GigabitEthernet
0/0/16 to
GigabitEthernet
0/0/23.
Among the four
GE ports from
GigabitEthernet0/
0/20 to
GigabitEthernet0/
0/23,
GigabitEthernet0/
0/20 and
GigabitEthernet0/
0/21 are a pair of
two bypass
interfaces, and
GigabitEthernet0/
0/22 and
GigabitEthernet0/
0/23 are another
pair. When the
interfaces of each
bypass interface
pair work at Layer

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 193

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

2, they can form

an electrical
bypass link.By
default, the
combo port is
used as an
electrical port.
You can use the
combo enable
{ copper | fiber }
command to set
the working mode
of combo ports
according to
network
requirements.
NOTE
A bypass link can
be established only
when
GigabitEthernet0/0
/20 to
GigabitEthernet0/0
/23 work as
electrical ports.
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 194

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

10GE optical ports SFP+ 2 GE/10GE ● 1Gbps SFP

(0 to 1) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/1. Optical
Modules
NOTE
In
V600R007C20SPC3
00 and later
versions, 10GE
optical ports
support 1Gbps SFP
Copper Modules
and 1Gbps eSFP
Optical Modules.

USB port USB Type A USB port allows USB flash drive
you to insert an
USB flash drive
for system
software
upgrades. For
details on
upgrades through
USB flash drives,
refer to the
Upgrade Guide
delivered with the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 195

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 196

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

The power supply system has one PAC150S12-R AC power module, but two power
modules can be configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system consists of two FAN-023A-B modules working in 1+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 197

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-75 System air flow of the USG6605E-B

Technical Specifications

Table 4-78 Technical specifications of the USG6605E-B

Item Specification

Installation Type ● Rack

● Work bench

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 175 mm x 650 mm x 550 mm (6.89 in.

D) [mm(in.)] x 25.59 in. x 21.65 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 8.25 kg (18.19 lb)

Weight without packaging [kg(lb)] 6.25 kg (13.78 lb)

CPU 1 CPU, 4 cores/CPU, up to 1.4 GHz

Memory DDR4 8 GB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 198

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

NOR Flash ● USG6605E-B-AC (02353PSK): 64MB

● USG6605E-B-AC (02353PSK-001):
64 MB

NAND Flash 2 GB

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 76.9 W

Maximum heat dissipation [BTU/hour] 262.38 BTU/hour

MTBF [years] 41.89 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 264 V, 47 Hz to 63 Hz

Maximum input current [A] 3A

Rated output power [W] 150W/12V

Maximum output power [W] 150 W

Types of fans Pluggable

Number of fan modules 2

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 2

Maximum number of GE ports 8

Maximum number of electrical ports 24

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 199

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Redundant fans 1+1

Noise at normal temperature (acoustic ≤55dbA

power) [db(A)]

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

4.1.14 USG6610E

Overview

Table 4-79 Basic information about the USG6610E

Description Part Number Model First supported

version

USG6610E AC 02352HMD USG6610E-AC V600R007C20SPC

Host (12*GE RJ45 100
+ 8*GE SFP
+ 4*10GE SFP+,1
AC power)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 200

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Description Part Number Model First supported

version

USG6610E AC 02352HMD-001 USG6610E-AC V600R007C20SPC

Host (12*GE RJ45 300
+ 8*GE SFP
+ 4*10GE SFP+,1
AC power)

USG6610E AC 02352HMD-002 USG6610E-AC V600R007C20SPC

Host(12*GE 600
RJ45+8*GE SFP
+4*10GE SFP+,1
AC power)

Appearance
NOTE

The model with the BOM number containing "-001" and "-002" have one more OFL
indicator than the model with the BOM number not containing "-001" or "-002". The
silkscreen of the device contains "HiSecEngine", and the distribution of heat dissipation
holes on the front of one model slightly differ from that of another model. This document
uses the model whose BOM number contains "-001" as an example.

Figure 4-76 Appearance of the USG6610E (front view)

Figure 4-77 Appearance of the USG6610E (rear view)

Components

Figure 4-78 Components of the USG6610E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 201

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Optional 10. Power

power module module
slot

Table 4-80 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN3, and the corresponding slot numbers are 4, 5,
and 6 respectively.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 202

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Indicators and Buttons

Figure 4-79 Indicators and buttons on the USG6610E

1. PWR, SYS, 2. OFL 3. GE electrical 4. Optical port 5. Optical port

USB, HA, WAN indicator port indicator ACT indicator LINK indicator
and CLOUD
NOTE
indicators
Only the
models whose
BOM number
contain "-001"
and "-002"
support the
OFL indicator.

6. MGMT port 7. RST button 8. OFL button - -

indicator

NOTE

● GE electrical interface indicators from left to right correspond to GE electrical interfaces

in ascending order. For example, the first indicator on the panel corresponds to
GigabitEthernet0/0/0 and the second indicator corresponds to GigabitEthernet0/0/1.
● Arrowheads of optical ports show the positions of the ports. A down arrowhead
indicates a port in the upper part, and an up arrowhead indicates a port in the lower
part.

Table 4-81 Indicators on the USG6610E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 203

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 204

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Green Blinks once Management

every 2 backup device
seconds (0.5 in hot
Hz). standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 205

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- OFL indicator Green Steady on The hard disk

can be
removed.

- Off The hard disk

cannot be
removed.

- GE electrical Green Steady on The port link

port indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 206

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-82 Buttons on the USG6610E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-80 Ports on the USG6610E

1. HDD/SSD 2. GE electrical 3. GE optical 4. 10GE optical 5. USB 3.0 port

slot port port port

6. Console port 7. MGMT port - - -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 207

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-83 Ports on the USG6610E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

GE electrical ports RJ45 12 10/100/1000M Ethernet Cable

(0 to 11) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/11.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 208

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE optical ports SFP 8 GE autosensing ● 1Gbps SFP

(12 to 19) Ethernet optical Copper
ports, numbered Modules
from ● 1Gbps eSFP
GigabitEthernet0/ Optical
0/12 to Modules
GigabitEthernet0/
0/19.

10GE optical ports SFP+ 4 GE/10GE ● 1Gbps SFP

(0 to 3) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/11. Optical
Modules

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 209

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

● Early delivery: The power supply system has one PAC600S12-B AC power
module, but two power modules can be configured for 1+1 power
redundancy.
● Later delivery: The power supply system has one PAC600S12-CB, PAC600S12-
DB, or PAC600S12-EB AC power module, but two power modules can be
configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system consists of three FAN-023A-B modules working in 2+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 210

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-81 System air flow of the USG6610E

Technical Specifications

Table 4-84 Technical specifications of the USG6610E

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 225 mm x 550 mm x 530 mm (8.86 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] ● USG6610E-AC (02352HMD): 10.1

kg (22.27 lb)
● USG6610E-AC (02352HMD-001):
9.4 kg (20.72 lb)
● USG6610E-AC (02352HMD-002):
9.4 kg (20.72 lb)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 211

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Weight without packaging [kg(lb)] ● USG6610E-AC (02352HMD): 7.1 kg

(15.65 lb)
● USG6610E-AC (02352HMD-001):
6.7 kg (14.77 lb)
● USG6610E-AC (02352HMD-002):
6.7 kg (14.77 lb)

CPU 1 CPU, 8 cores/CPU, up to 2.3 GHz

Memory DDR4 8 GB

Storage 32GB

NOR Flash ● USG6610E-AC (02352HMD): 32 MB

● USG6610E-AC (02352HMD-001):
64MB
● USG6610E-AC (02352HMD-002):
64MB

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] ● USG6610E-AC (02352HMD): 161.79

W
● USG6610E-AC (02352HMD-001):
139 W
● USG6610E-AC (02352HMD-002):
139 W

Maximum heat dissipation [BTU/hour] ● USG6610E-AC (02352HMD): 552.02

BTU/hour
● USG6610E-AC (02352HMD-001):
474.27 BTU/hour
● USG6610E-AC (02352HMD-002):
474.27 BTU/hour

MTBF [years] 29.34 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 212

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Maximum input current [A] 9A

Maximum output power [W] 600 W

Types of fans Pluggable

Number of fan modules 3

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 4

Maximum number of GE ports 8

Maximum number of electrical ports 12

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Redundant fans 2+1

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 213

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.1.15 USG6615E

Overview

Table 4-85 Basic information about the USG6615E

Description Part Number Model First supported
version

USG6615E AC 02352RQL USG6615E-AC V600R007C00

Host (16*GE RJ45
+ 6*GE SFP
+ 6*10GE SFP+,
16G Memory,1 AC
POWER)

Appearance

Figure 4-82 Appearance of the USG6615E (front view)

Figure 4-83 Appearance of the USG6615E (rear view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 214

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Components

Figure 4-84 Components of the USG6615E

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Optional 10. Power

power module module
slot

Table 4-86 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 215

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN3, and the corresponding slot numbers are 4, 5,
and 6 respectively.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-85 Indicators and buttons on the USG6615E

1. PWR, SYS, 2. OFL 3. GE electrical 4. GE electrical 5. Optical port

USB, HA, WAN indicator port ACT port LINK ACT indicator
and CLOUD indicator indicator
indicators

6. Optical port 7. MGMT port 8. RST button 9. OFL button -

LINK indicator indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 216

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-87 Indicators on the USG6615E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 217

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Green Blinks once Management

every 2 backup device
seconds (0.5 in hot
Hz). standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 218

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- OFL indicator Green Steady on The hard disk

can be
removed.

- Off The hard disk

cannot be
removed.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 219

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-88 Buttons on the USG6615E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-86 Ports on the USG6615E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 220

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. HDD/SSD 2. GE electrical 3. GE optical 4. 10GE optical 5. USB 2.0 port

slot port port port

6. Console port 7. MGMT port - - -

Table 4-89 Ports on the USG6615E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20,
SSD-
SATA960G-B
disks are
supported.
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 221

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE electrical ports RJ45 16 10/100/1000M Ethernet Cable

(0 to 15) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/15.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

GE optical ports SFP 6 GE autosensing ● 1Gbps SFP

(16 to 21) Ethernet optical Copper
ports, numbered Modules
from ● 1Gbps eSFP
GigabitEthernet0/ Optical
0/16 to Modules
GigabitEthernet0/
0/21.

10GE optical ports SFP+ 6 GE/10GE ● 1Gbps SFP

(0 to 5) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/5. Optical
Modules

USB 2.0 port USB 2.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 222

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 223

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

The power supply system has one PAC600S12-CB, PAC600S12-DB, or PAC600S12-
EB AC power module, but two power modules can be configured for 1+1 power
redundancy.

Heat Dissipation System

The heat dissipation system consists of three FAN-023A-B modules working in 2+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 224

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-87 System air flow of the USG6615E

Technical Specifications

Table 4-90 Technical specifications of the USG6615E-AC

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 225 mm x 550 mm x 530 mm (8.86 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 10.9 kg (24.03 lb)

Weight without packaging [kg(lb)] 7.75 kg (17.09 lb)

CPU 1 CPU, 16 cores/CPU, up to 1.85 GHz

Memory DDR4 8 GB x 2

NOR Flash 64MB

NAND Flash 2 GB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 225

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 118 W

Maximum heat dissipation [BTU/hour] 403.56 BTU/hour

MTBF [years] 37.76 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Maximum input current [A] 8A

Maximum output power [W] 600 W

Types of fans Pluggable

Number of fan modules 3

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 6

Maximum number of GE ports 6

Maximum number of electrical ports 16

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Redundant fans 2+1

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 226

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

4.1.16 USG6620E

Overview

Table 4-91 Basic information about the USG6620E

Description Part Number Model First supported
version

USG6620E AC 02352HMF USG6620E-AC V600R007C20SPC

Host (12*GE RJ45 100
+ 8*GE SFP
+ 4*10GE SFP+,1
AC power)

USG6620E AC 02352HMF-001 USG6620E-AC V600R007C20SPC

Host (12*GE RJ45 300
+ 8*GE SFP
+ 4*10GE SFP+,1
AC power)

USG6620E AC 02352HMF-002 USG6620E-AC V600R007C20SPC

Host(12*GE 600
RJ45+8*GE SFP
+4*10GE SFP+ ,1
AC power)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 227

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance
NOTE

The model with the BOM number containing "-001" and "-002" have one more OFL
indicator than the model with the BOM number not containing "-001" or "-002". The
silkscreen of the device contains "HiSecEngine", and the distribution of heat dissipation
holes on the front of one model slightly differ from that of another model. This document
uses the model whose BOM number contains "-001" as an example.

Figure 4-88 Appearance of the USG6620E (front view)

Figure 4-89 Appearance of the USG6620E (rear view)

Components

Figure 4-90 Components of the USG6620E

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Optional 10. Power

power module module
slot

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 228

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-92 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN3, and the corresponding slot numbers are 4, 5,
and 6 respectively.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 229

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Indicators and Buttons

Figure 4-91 Indicators and buttons on the USG6620E

1. PWR, SYS, 2. OFL 3. GE electrical 4. Optical port 5. Optical port

USB, HA, WAN indicator port indicator ACT indicator LINK indicator
and CLOUD
NOTE
indicators
Only the
models whose
BOM number
contain "-001"
and "-002"
support the
OFL indicator.

6. MGMT port 7. RST button 8. OFL button - -

indicator

NOTE

● GE electrical interface indicators from left to right correspond to GE electrical interfaces

in ascending order. For example, the first indicator on the panel corresponds to
GigabitEthernet0/0/0 and the second indicator corresponds to GigabitEthernet0/0/1.
● Arrowheads of optical ports show the positions of the ports. A down arrowhead
indicates a port in the upper part, and an up arrowhead indicates a port in the lower
part.

Table 4-93 Indicators on the USG6620E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 230

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 231

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Green Blinks once Management

every 2 backup device
seconds (0.5 in hot
Hz). standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 232

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- OFL indicator Green Steady on The hard disk

can be
removed.

- Off The hard disk

cannot be
removed.

- GE electrical Green Steady on The port link

port indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port
- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 233

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-94 Buttons on the USG6620E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-92 Ports on the USG6620E

1. HDD/SSD 2. GE electrical 3. GE optical 4. 10GE optical 5. USB 3.0 port

slot port port port

6. Console port 7. MGMT port - - -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 234

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-95 Ports on the USG6620E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

GE electrical ports RJ45 12 10/100/1000M Ethernet Cable

(0 to 11) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/11.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 235

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE optical ports SFP 8 GE autosensing ● 1Gbps SFP

(12 to 19) Ethernet optical Copper
ports, numbered Modules
from ● 1Gbps eSFP
GigabitEthernet0/ Optical
0/12 to Modules
GigabitEthernet0/
0/19.

10GE optical ports SFP+ 4 GE/10GE ● 1Gbps SFP

(0 to 3) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/11. Optical
Modules

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 236

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

● Early delivery: The power supply system has one PAC600S12-B AC power
module, but two power modules can be configured for 1+1 power
redundancy.
● Later delivery: The power supply system has one PAC600S12-CB, PAC600S12-
DB, or PAC600S12-EB AC power module, but two power modules can be
configured for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system consists of three FAN-023A-B modules working in 2+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 237

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-93 System air flow of the USG6620E

Technical Specifications

Table 4-96 Technical specifications of the USG6620E

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 225 mm x 550 mm x 530 mm (8.86 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] ● USG6620E-AC (02352HMF): 10.1 kg

(22.27 lb)
● USG6620E-AC (02352HMF-001): 9.4
kg (20.72 lb)
● USG6620E-AC (02352HMF-002): 9.4
kg (20.72 lb)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 238

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Weight without packaging [kg(lb)] ● USG6620E-AC (02352HMF): 7.1 kg

(15.65 lb)
● USG6620E-AC (02352HMF-001): 6.7
kg (14.77 lb)
● USG6620E-AC (02352HMF-002): 6.7
kg (14.77 lb)

CPU 1 CPU, 8 cores/CPU, up to 2.3 GHz

Memory DDR4 8 GB

Storage 32GB

NOR Flash ● USG6620E-AC (02352HMF): 32 MB

● USG6620E-AC (02352HMF-001):
64MB
● USG6620E-AC (02352HMF-002):
64MB

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] ● USG6620E-AC (02352HMF): 161.79

W
● USG6620E-AC (02352HMF-001):
139 W
● USG6620E-AC (02352HMF-002):
139 W

Maximum heat dissipation [BTU/hour] ● USG6620E-AC (02352HMF): 552.02

BTU/hour
● USG6620E-AC (02352HMF-001):
474.27 BTU/hour
● USG6620E-AC (02352HMF-002):
474.27 BTU/hour

MTBF [years] 29.34 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 239

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Maximum input current [A] 9A

Maximum output power [W] 600 W

Types of fans Pluggable

Number of fan modules 3

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 4

Maximum number of GE ports 8

Maximum number of electrical ports 12

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Redundant fans 2+1

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 240

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.1.17 USG6625E

Overview

Table 4-97 Basic information about the USG6625E

Description Part Number Model First supported
version

USG6625E AC 02352RQN USG6625E-AC V600R007C00

Host (16*GE RJ45
+ 6*GE SFP
+ 6*10GE SFP+,
16G Memory,1 AC
POWER)

Appearance

Figure 4-94 Appearance of the USG6625E (front view)

Figure 4-95 Appearance of the USG6625E (rear view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 241

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Components

Figure 4-96 Components of the USG6625E

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Optional 10. Power

power module module
slot

Table 4-98 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 242

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN3, and the corresponding slot numbers are 4, 5,
and 6 respectively.

Power module Provides power input and distribution for the device.
One power module is included in the standard
configuration. Two power modules can be configured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-97 Indicators and buttons on the USG6625E

1. PWR, SYS, 2. OFL 3. GE electrical 4. GE electrical 5. Optical port

USB, HA, WAN indicator port ACT port LINK ACT indicator
and CLOUD indicator indicator
indicators

6. Optical port 7. MGMT port 8. RST button 9. OFL button -

LINK indicator indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 243

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-99 Indicators on the USG6625E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 244

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Green Blinks once Management

every 2 backup device
seconds (0.5 in hot
Hz). standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 245

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- OFL indicator Green Steady on The hard disk

can be
removed.

- Off The hard disk

cannot be
removed.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- LINK indicator Yellow Blinking (12 The port is

of the optical Hz) sending or
port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of an optical is connected.
port

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 246

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-100 Buttons on the USG6625E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-98 Ports on the USG6625E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 247

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. HDD/SSD 2. GE electrical 3. GE optical 4. 10GE optical 5. USB 2.0 port

slot port port port

6. Console port 7. MGMT port - - -

Table 4-101 Ports on the USG6625E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20,
SSD-
SATA960G-B
disks are
supported.
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 248

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE electrical ports RJ45 16 10/100/1000M Ethernet Cable

(0 to 15) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/15.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

GE optical ports SFP 6 GE autosensing ● 1Gbps SFP

(16 to 21) Ethernet optical Copper
ports, numbered Modules
from ● 1Gbps eSFP
GigabitEthernet0/ Optical
0/16 to Modules
GigabitEthernet0/
0/21.

10GE optical ports SFP+ 6 GE/10GE ● 1Gbps SFP

(0 to 5) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/5. Optical
Modules

USB 2.0 port USB 2.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 249

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 250

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

The power supply system has one PAC600S12-CB, PAC600S12-DB, or PAC600S12-
EB AC power module, but two power modules can be configured for 1+1 power
redundancy.

Heat Dissipation System

The heat dissipation system consists of three FAN-023A-B modules working in 2+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 251

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-99 System air flow of the USG6625E

Technical Specifications

Table 4-102 Technical specifications of the USG6625E-AC

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 225 mm x 550 mm x 530 mm (8.86 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 10.9 kg (24.03 lb)

Weight without packaging [kg(lb)] 7.75 kg (17.09 lb)

CPU 1 CPU, 16 cores/CPU, up to 1.85 GHz

Memory DDR4 8 GB x 2

NOR Flash 64MB

NAND Flash 2 GB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 252

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 118 W

Maximum heat dissipation [BTU/hour] 403.56 BTU/hour

MTBF [years] 37.76 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 1

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Maximum input current [A] 8A

Maximum output power [W] 600 W

Types of fans Pluggable

Number of fan modules 3

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 10GE ports 6

Maximum number of GE ports 6

Maximum number of electrical ports 16

Redundant power supply Two power modules are supported for

1+1 power redundancy.

Redundant fans 2+1

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 253

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

4.1.18 USG6630E

Overview

Table 4-103 Basic information about the USG6630E

Description Part Number Model First supported
version

USG6630E AC 02352FQA USG6630E-AC V600R006C00

Host (12*GE RJ45
+ 12*10GE SFP+
+ 2*40GE QSFP+,2
AC power)

USG6630E AC 02352FQA-001 USG6630E-AC V600R007C20SPC

Host (12*GE RJ45 300
+ 12*10GE SFP+
+ 2*40GE QSFP+,2
AC power)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 254

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Description Part Number Model First supported

version

USG6630E AC 02352FQA-002 USG6630E-AC V600R007C20SPC

Host(12*GE 600
RJ45+12*10GE
SFP+ + 2*40GE
QSFP+,2 AC
power)

USG6630E DC 02352CKV USG6630E-DC V600R006C00

Host (12*GE RJ45
+ 12*10GE SFP+
+ 2*40GE QSFP+,2
DC power)

USG6630E DC 02352CKV-001 USG6630E-DC V600R007C20SPC

Host (12*GE RJ45 300
+ 12*10GE SFP+
+ 2*40GE QSFP+,2
DC power)

USG6630E DC 02352CKV-002 USG6630E-DC V600R007C20SPC

Host(12*GE 600
RJ45+12*10GE
SFP+ + 2*40GE
QSFP+,2 DC
power)

Appearance
NOTE

● The appearance difference between the DC model and AC model is the power module
installed on the rear of the device. The following figure uses the AC model as an
example.
● The model with the BOM number containing "-001" and "-002" have one more OFL
indicator than the model with the BOM number not containing "-001" or "-002". The
silkscreen of the device contains "HiSecEngine", and the distribution of heat dissipation
holes on the front of one model slightly differ from that of another model. This
document uses the model whose BOM number contains "-001" as an example.

Figure 4-100 Appearance of the USG6630E (front view)

Figure 4-101 Appearance of the USG6630E (rear view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 255

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Components

Figure 4-102 Components of the USG6630E

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Power -

module

Table 4-104 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 256

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module The fan module provides air flow for heat dissipation.
The power module supports hot-swapping and can be
replaced without interrupting device operation.
However, to prevent overheating, do not operate the
device without a functioning fan module for more than
one minute.
The silkscreens of the fan module slots are FAN1 to
FAN3, and the corresponding slot numbers are 4, 5,
and 6 respectively.

Power module Provides power input and distribution for the device.
Two power modules are included in the standard
configuration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-103 Indicators and buttons on the USG6630E

1. PWR, SYS, 2. OFL 2. GE electrical 3. 10GE optical 4. 10GE optical

USB, HA, WAN indicator port indicator port ACT port LINK
and CLOUD indicator indicator
NOTE
indicators
Only the
models whose
BOM number
contain "-001"
and "-002"
support the
OFL indicator.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 257

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

5. 40GE optical 6. MGMT port 7. RST button 8. OFL button -

port indicator indicator

NOTE

● GE electrical interface indicators from left to right correspond to GE electrical interfaces

in ascending order. For example, the first indicator on the panel corresponds to
GigabitEthernet0/0/0 and the second indicator corresponds to GigabitEthernet0/0/1.
● Arrowheads of optical ports show the positions of the ports. A down arrowhead
indicates a port in the upper part, and an up arrowhead indicates a port in the lower
part.

Table 4-105 Indicators on the USG6630E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 258

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 259

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinks once Management

every 2 backup device
seconds (0.5 in hot
Hz). standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- OFL indicator Green Steady on The hard disk

can be
removed.

- Off The hard disk

cannot be
removed.

- GE electrical Green Steady on The port link

port indicator is connected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 260

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

- ACT indicator Yellow Blinking (12 The port is

for 10GE Hz) sending or
optical ports receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

for 10GE is connected.
optical ports
- Off No link is
established
on the port.

- Indicator for Green Steady on The port link

40GE optical is connected.
ports
Green Blinking (12 The port is
Hz) sending or
receiving
data.

- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 261

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-106 Buttons on the USG6630E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-104 Ports on the USG6630E

1. HDD/SSD 2. GE electrical 3. 10GE optical 4. 40GE optical 5. USB 3.0 port

slot port port port

6. Console port 7. MGMT port - - -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 262

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-107 Ports on the USG6630E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20,
SSD-
SATA960G-B
disks are
supported.
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 263

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE electrical ports RJ45 12 10/100/1000M Ethernet Cable

(0 to 11) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/11.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

10GE optical ports SFP+ 12 GE/10GE ● 1Gbps SFP

(0 to 11) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/11. Optical
Modules

40GE optical ports QSFP+ Two 40GE 40Gbps QSFP+

(0 to 1) Ethernet optical Optical Modules
ports, numbered
from 40GE0/0/0
to 40GE0/0/1.

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 264

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 265

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

● Early delivery: The power supply system has two PAC600S12-B AC power
modules or PDC350S12-B DC power modules for 1+1 power redundancy.
● Later delivery: The power supply system has two PAC600S12-CB, PAC600S12-
DB, or PAC600S12-EB AC power modules or PDC1000S12-CB DC power
modules for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system consists of three FAN-023A-B modules working in 2+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 266

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-105 System air flow of the USG6630E

Technical Specifications

Table 4-108 Technical specifications of the USG6630E

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 215 mm x 550 mm x 530 mm (8.46 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 267

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Weight with packaging [kg(lb)] ● USG6630E-AC (02352FQA): 10.9 kg

(24.03 lb)
● USG6630E-AC (02352FQA-001):
10.2 kg (22.49 lb)
● USG6630E-AC (02352FQA-002):
10.2 kg (22.49 lb)
● USG6630E-DC (02352CKV): 10.3 kg
(22.71 lb)
● USG6630E-DC (02352CKV-001):
10.2 kg (22.49 lb)
● USG6630E-DC (02352CKV-002):
10.2 kg (22.49 lb)

Weight without packaging [kg(lb)] ● USG6630E-AC (02352FQA): 7.9 kg

(17.42 lb)
● USG6630E-AC (02352FQA-001): 7.5
kg (16.53 lb)
● USG6630E-AC (02352FQA-002): 7.5
kg (16.53 lb)
● USG6630E-DC (02352CKV): 7.3 kg
(16.09 lb)
● USG6630E-DC (02352CKV-001): 7.5
kg (16.53 lb)
● USG6630E-DC (02352CKV-002): 7.5
kg (16.53 lb)

CPU 1 CPU, 8 cores/CPU, up to 2.3 GHz

Memory DDR4 16 GB

Storage 32GB

NOR Flash ● USG6630E-AC (02352FQA): 32 MB

● USG6630E-AC (02352FQA-001):
64MB
● USG6630E-AC (02352FQA-002):
64MB
● USG6630E-DC (02352CKV): 32 MB
● USG6630E-DC (02352CKV-001):
64MB
● USG6630E-DC (02352CKV-002):
64MB

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 268

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] ● USG6630E-AC (02352FQA): 191 W

● USG6630E-AC (02352FQA-001):
171.7 W
● USG6630E-AC (02352FQA-002):
171.7 W
● USG6630E-DC (02352CKV): 172.14
W
● USG6630E-DC (02352CKV-001):
192.4 W
● USG6630E-DC (02352CKV-002):
192.4 W

Maximum heat dissipation [BTU/hour] ● USG6630E-AC (02352FQA): 651.7

BTU/hour
● USG6630E-AC (02352FQA-001):
585.84 BTU/hour
● USG6630E-AC (02352FQA-002):
585.84 BTU/hour
● USG6630E-DC (02352CKV): 587.34
BTU/hour
● USG6630E-DC (02352CKV-001):
656.47 BTU/hour
● USG6630E-DC (02352CKV-002):
656.47 BTU/hour

MTBF [years] 29.34 years

MTTR [hours] 2 hours

Power supply mode ● USG6630E-AC (02352FQA): AC

built-in
● USG6630E-AC (02352FQA-001): AC
built-in
● USG6630E-AC (02352FQA-002): AC
built-in
● USG6630E-DC (02352CKV): DC
built-in
● USG6630E-DC (02352CKV-001): DC
built-in
● USG6630E-DC (02352CKV-002): DC
built-in

Number of power modules 2

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 269

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Rated input voltage [V] ● USG6630E-AC (02352FQA): 100 V

to 240 V, 50 Hz/60 Hz
● USG6630E-AC (02352FQA-001):
100 V to 240 V, 50 Hz/60 Hz
● USG6630E-AC (02352FQA-002):
100 V to 240 V, 50 Hz/60 Hz
● USG6630E-DC (02352CKV): -48 V to
-60 V
● USG6630E-DC (02352CKV-001): -48
V to -60 V
● USG6630E-DC (02352CKV-002): -48
V to -60 V

Input voltage range [V] ● USG6630E-AC (02352FQA): 90 V to

290 V, 47 Hz to 63 Hz
● USG6630E-AC (02352FQA-001): 90
V to 290 V, 47 Hz to 63 Hz
● USG6630E-AC (02352FQA-002): 90
V to 290 V, 47 Hz to 63 Hz
● USG6630E-DC (02352CKV): -38.4 V
to -72 V
● USG6630E-DC (02352CKV-001):
-38.4 V to -72 V
● USG6630E-DC (02352CKV-002):
-38.4 V to -72 V

Maximum input current [A] ● USG6630E-AC (02352FQA): 9 A

● USG6630E-AC (02352FQA-001): 9 A
● USG6630E-AC (02352FQA-002): 9 A
● USG6630E-DC (02352CKV): 11 A
● USG6630E-DC (02352CKV-001): 11
A
● USG6630E-DC (02352CKV-002): 11
A

Maximum output power [W] ● USG6630E-AC (02352FQA): 600 W

● USG6630E-AC (02352FQA-001):
600 W
● USG6630E-AC (02352FQA-002):
600 W
● USG6630E-DC (02352CKV): 350 W
● USG6630E-DC (02352CKV-001):
1000 W
● USG6630E-DC (02352CKV-002):
1000 W

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 270

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Types of fans Pluggable

Number of fan modules 3

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 40GE ports 2

Maximum number of 10GE ports 12

Maximum number of electrical ports 12

Redundant power supply 1+1

Redundant fans 2+1

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

4.1.19 USG6635E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 271

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Overview

Table 4-109 Basic information about the USG6635E

Description Part Number Model First supported

version

USG6635E AC 02352RQD USG6635E-AC V600R007C00

Host (16*GE RJ45
+ 12*10GE SFP+
+ 2*40GE QSFP+,
32G Memory,2 AC
POWER)

USG6635E DC 02352RQE USG6635E-DC V600R007C20

Host (16*GE RJ45
+ 12*10GE SFP+
+ 2*40GE QSFP+,
32G Memory,2 DC
POWER)

Appearance
NOTE

The appearance difference between the DC model and AC model is the power module
installed on the rear of the device. The following figure uses the AC model as an example.

Figure 4-106 Appearance of the USG6635E (front view)

Figure 4-107 Appearance of the USG6635E (rear view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 272

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Components

Figure 4-108 Components of the USG6635E

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Power -

module

Table 4-110 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 273

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN4, and the corresponding slot numbers are 4, 5, 6,
and 7 respectively.

Power module Provides power input and distribution for the device.
Two power modules are included in the standard
configuration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-109 Indicators and buttons on the USG6635E

1. PWR, SYS, 2. OFL 3. GE electrical 4. GE electrical 5. 10GE optical

USB, HA, WAN indicator port ACT port LINK port ACT
and CLOUD indicator indicator indicator
indicators

6. 10GE optical 7. 40GE optical 8. MGMT port 9. RST button 10. OFL button
port LINK port indicator indicator
indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 274

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-111 Indicators on the USG6635E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 275

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Green Blinks once Management

every 2 backup device
seconds (0.5 in hot
Hz). standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 276

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- OFL indicator Green Steady on The hard disk

can be
removed.

- Off The hard disk

cannot be
removed.

- ACT indicator Yellow Blinking (12 The port is

of the GE Hz) sending or
electrical port receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

of the GE is connected.
electrical
ports - Off No link is
established
on the port.

- ACT indicator Yellow Blinking (12 The port is

for 10GE Hz) sending or
optical ports receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

for 10GE is connected.
optical ports

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 277

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off No link is
established
on the port.

- Indicator for Green Steady on The port link

40GE optical is connected.
ports
Green Blinking (12 The port is
Hz) sending or
receiving
data.

- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-112 Buttons on the USG6635E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 278

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Description

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-110 Ports on the USG6635E

1. HDD/SSD 2. GE electrical 3. 10GE optical 4. 40GE optical 5. USB 2.0 port

slot port port port

6. Console port 7. MGMT port - - -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 279

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-113 Ports on the USG6635E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20,
SSD-
SATA960G-B
disks are
supported.
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 280

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE electrical ports RJ45 16 10/100/1000M Ethernet Cable

(0 to 15) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/15.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

10GE optical ports SFP+ 12 GE/10GE ● 1Gbps SFP

(0 to 11) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/11. Optical
Modules
When 40GE0/0/1
optical port on
the device is
enabled, the 10GE
optical ports
numbered from
XGigabitEthernet0
/0/8 to
XGigabitEthernet0
/0/11 cannot be
used.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 281

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

40GE optical ports QSFP+ Two 40GE 40Gbps QSFP+

(0 to 1) Ethernet optical Optical Modules
ports, numbered
from 40GE0/0/0
to 40GE0/0/1.
By default, the
40GE0/0/1 optical
port mode is
disabled. To
enable this mode,
run the set device
port-config-mode
40g-port enable
command.

USB 2.0 port USB 2.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 282

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

The power supply system has two PAC600S12-CB, PAC600S12-DB, or PAC600S12-
EB AC power modules or PDC1000S12-CB DC power modules for 1+1 power
redundancy.

Heat Dissipation System

The heat dissipation system consists of four FAN-023A-B modules working in 3+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 283

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-111 System air flow of the USG6635E

Technical Specifications

Table 4-114 Technical specifications of the USG6635E

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 225 mm x 550 mm x 530 mm (8.86 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 11.88 kg (26.19 lb)

Weight without packaging [kg(lb)] 7.75 kg (17.09 lb)

CPU 2 CPU, 16 cores/CPU, up to 1.85 GHz

Memory DDR4 32 GB, 16 GB/CPU

NOR Flash 128 MB, 64 MB/CPU

NAND Flash 2 GB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 284

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] ● USG6635E-AC (02352RQD): 156 W

● USG6635E-DC (02352RQE): 169.7
W

Maximum heat dissipation [BTU/hour] ● USG6635E-AC (02352RQD): 533.4

BTU/hour
● USG6635E-DC (02352RQE): 579.02
BTU/hour

MTBF [years] 31.63 years

MTTR [hours] 2 hours

Power supply mode ● USG6635E-AC (02352RQD): AC

built-in
● USG6635E-DC (02352RQE): DC
built-in

Number of power modules 2

Rated input voltage [V] ● USG6635E-AC (02352RQD): 100 V

to 240 V, 50 Hz/60 Hz
● USG6635E-DC (02352RQE): -48 V
to -60 V

Input voltage range [V] ● USG6635E-AC (02352RQD): 90 V to

290 V, 47 Hz to 63 Hz
● USG6635E-DC (02352RQE): -38.4 V
to -72 V

Maximum input current [A] ● USG6635E-AC (02352RQD): 8 A

● USG6635E-DC (02352RQE): 30 A

Rated output power [W] ● USG6635E-AC (02352RQD): -

● USG6635E-DC (02352RQE): 1000
W/12 V

Maximum output power [W] ● USG6635E-AC (02352RQD): 600 W

● USG6635E-DC (02352RQE): 1000 W

Types of fans Pluggable

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 285

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Number of fan modules 4

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 40GE ports 2

Maximum number of 10GE ports 12

Maximum number of electrical ports 16

Redundant power supply 1+1

Redundant fans 3+1

Noise at normal temperature (acoustic ● USG6635E-AC (02352RQD): -

power) [db(A)] ● USG6635E-DC (02352RQE): ≤72dbA

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

4.1.20 USG6650E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 286

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Overview

Table 4-115 Basic information about the USG6650E

Description Part Number Model First supported
version

USG6650E AC 02351YRY USG6650E-AC V600R006C00

Host (12*GE RJ45
+ 12*10GE SFP+
+ 2*40GE QSFP+,2
AC power)

USG6650E AC 02351YRY-001 USG6650E-AC V600R007C20SPC

Host (12*GE RJ45 300
+ 12*10GE SFP+
+ 2*40GE QSFP+,2
AC power)

USG6650E AC 02351YRY-002 USG6650E-AC V600R007C20SPC

Host(12*GE 600
RJ45+12*10GE
SFP+ + 2*40GE
QSFP+,2 AC
power)

Appearance
NOTE

The model with the BOM number containing "-001" and "-002" have one more OFL
indicator than the model with the BOM number not containing "-001" or "-002". The
silkscreen of the device contains "HiSecEngine", and the distribution of heat dissipation
holes on the front of one model slightly differ from that of another model. This document
uses the model whose BOM number contains "-001" as an example.

Figure 4-112 Appearance of the USG6650E (front view)

Figure 4-113 Appearance of the USG6650E (rear view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 287

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Components

Figure 4-114 Components of the USG6650E

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Power -

module

Table 4-116 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 288

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

Fan module The fan module provides air flow for heat dissipation.
The power module supports hot-swapping and can be
replaced without interrupting device operation.
However, to prevent overheating, do not operate the
device without a functioning fan module for more than
one minute.
The silkscreens of the fan module slots are FAN1 to
FAN3, and the corresponding slot numbers are 4, 5,
and 6 respectively.

Power module Provides power input and distribution for the device.
Two power modules are included in the standard
configuration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-115 Indicators and buttons on the USG6650E

1. PWR, SYS, 2. OFL 2. GE electrical 3. 10GE optical 4. 10GE optical

USB, HA, WAN indicator port indicator port ACT port LINK
and CLOUD indicator indicator
NOTE
indicators
Only the
models whose
BOM number
contain "-001"
and "-002"
support the
OFL indicator.

5. 40GE optical 6. MGMT port 7. RST button 8. OFL button -

port indicator indicator

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 289

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTE

● GE electrical interface indicators from left to right correspond to GE electrical interfaces

in ascending order. For example, the first indicator on the panel corresponds to
GigabitEthernet0/0/0 and the second indicator corresponds to GigabitEthernet0/0/1.
● Arrowheads of optical ports show the positions of the ports. A down arrowhead
indicates a port in the upper part, and an up arrowhead indicates a port in the lower
part.

Table 4-117 Indicators on the USG6650E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 290

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 291

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinks once Management

every 2 backup device
seconds (0.5 in hot
Hz). standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- OFL indicator Green Steady on The hard disk

can be
removed.

- Off The hard disk

cannot be
removed.

- GE electrical Green Steady on The port link

port indicator is connected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 292

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

- ACT indicator Yellow Blinking (12 The port is

for 10GE Hz) sending or
optical ports receiving
data.

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

for 10GE is connected.
optical ports
- Off No link is
established
on the port.

- Indicator for Green Steady on The port link

40GE optical is connected.
ports
Green Blinking (12 The port is
Hz) sending or
receiving
data.

- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 293

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-118 Buttons on the USG6650E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-116 Ports on the USG6650E

1. HDD/SSD 2. GE electrical 3. 10GE optical 4. 40GE optical 5. USB 3.0 port

slot port port port

6. Console port 7. MGMT port - - -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 294

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-119 Ports on the USG6650E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20,
SSD-
SATA960G-B
disks are
supported.
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 295

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE electrical ports RJ45 12 10/100/1000M Ethernet Cable

(0 to 11) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/11.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

10GE optical ports SFP+ 12 GE/10GE ● 1Gbps SFP

(0 to 11) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/11. Optical
Modules

40GE optical ports QSFP+ Two 40GE 40Gbps QSFP+

(0 to 1) Ethernet optical Optical Modules
ports, numbered
from 40GE0/0/0
to 40GE0/0/1.

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 296

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 297

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

● Early delivery: The power supply system has two PAC600S12-B AC power
modules for 1+1 power redundancy.
● Later delivery: The power supply system has two PAC600S12-CB, PAC600S12-
DB, or PAC600S12-EB AC power modules for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system consists of three FAN-023A-B modules working in 2+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 298

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-117 System air flow of the USG6650E

Technical Specifications

Table 4-120 Technical specifications of the USG6650E

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 215 mm x 550 mm x 530 mm (8.46 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] ● USG6650E-AC (02351YRY): 10.9 kg

(24.03 lb)
● USG6650E-AC (02351YRY-001):
10.2 kg (22.49 lb)
● USG6650E-AC (02351YRY-002):
10.2 kg (22.49 lb)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 299

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Weight without packaging [kg(lb)] ● USG6650E-AC (02351YRY): 7.9 kg

(17.42 lb)
● USG6650E-AC (02351YRY-001): 7.5
kg (16.53 lb)
● USG6650E-AC (02351YRY-002): 7.5
kg (16.53 lb)

CPU 1 CPU, 8 cores/CPU, up to 2.3 GHz

Memory DDR4 16 GB

Storage 32GB

NOR Flash ● USG6650E-AC (02351YRY): 32 MB

● USG6650E-AC (02351YRY-001):
64MB
● USG6650E-AC (02351YRY-002):
64MB

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] ● USG6650E-AC (02351YRY): 191 W

● USG6650E-AC (02351YRY-001):
171.7 W
● USG6650E-AC (02351YRY-002):
171.7 W

Maximum heat dissipation [BTU/hour] ● USG6650E-AC (02351YRY): 651.7

BTU/hour
● USG6650E-AC (02351YRY-001):
585.84 BTU/hour
● USG6650E-AC (02351YRY-002):
585.84 BTU/hour

MTBF [years] 29.34 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 2

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 300

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Maximum input current [A] 9A

Maximum output power [W] 600 W

Types of fans Pluggable

Number of fan modules 3

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 40GE ports 2

Maximum number of 10GE ports 12

Maximum number of electrical ports 12

Redundant power supply 1+1

Redundant fans 2+1

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 301

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.1.21 USG6655E

Overview

Table 4-121 Basic information about the USG6655E

Description Part Number Model First supported
version

USG6655E AC 02352RPS USG6655E-AC V600R007C00

Host (16*GE RJ45
+ 12*10GE SFP+
+ 2*40GE QSFP+,
32G Memory,2 AC
POWER)

Appearance

Figure 4-118 Appearance of the USG6655E (front view)

Figure 4-119 Appearance of the USG6655E (rear view)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 302

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Components

Figure 4-120 Components of the

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Power -

module

Table 4-122 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 303

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN4, and the corresponding slot numbers are 4, 5, 6,
and 7 respectively.

Power module Provides power input and distribution for the device.
Two power modules are included in the standard
configuration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-121 Indicators and buttons on the USG6655E

1. PWR, SYS, 2. OFL 3. GE electrical 4. GE electrical 5. 10GE optical

USB, HA, WAN indicator port ACT port LINK port ACT
and CLOUD indicator indicator indicator
indicators

6. 10GE optical 7. 40GE optical 8. MGMT port 9. RST button 10. OFL button
port LINK port indicator indicator
indicator

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 304

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-123 Indicators on the USG6655E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module works
properly.

- Off The power

module is
faulty or the
power cable is
disconnected.

SYS System Green Steady on The system is

indicator being
powered on
or restarted.

Green Blink every The system is

two seconds running
(0.5 Hz) normally.

Green Blink four The system is

every second starting.
(4 Hz)

Red Steady on ● A system

fault
occurs.
● The power
module is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
dual power
modules but
one power
module is not
powered on,
the System
indicator is
steady red,
but the
system is
operating
properly.

- Off The system is

not running.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 305

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

USB USB indicator Green Steady on USB-based

deployment is
complete.

Green Blink four The data of

every second USB-based
(4 Hz) deployment is
being read.

Red Steady on USB-based

deployment
fails.

- Off If USB-based
deployment is
disabled, the
system is in
the default
state.

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Green Blink every Management

two seconds backup device
(0.5 Hz) in hot
standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved.

indicator

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 306

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blink four Connecting to

every second the cloud
(4 Hz) management
platform,
transmitting
or receiving
data.

- Off Not
connected or
registered to
the cloud
management
platform.

- OFL indicator Green Steady on The hard disk

is removable.

- Off The hard disk

cannot be
removed.

- ACT indicator Yellow Blink (12 Hz) Data is being

for GE sent or
Ethernet received
electrical through the
ports port.

- Off No data is
being sent or
received
through the
port.

- LINK indicator Green Steady on The link of

for GE the port is
Ethernet connected.
electrical
ports - Off The link of
the port is
disconnected.

- ACT indicator Yellow Blink (12 Hz) Data is being

for 10GE sent or
optical ports received
through the
port.

- Off No data is
being sent or
received
through the
port.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 307

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- LINK indicator Green Steady on The link of

for 10GE the port is
optical ports connected.

- Off The link of

the port is
disconnected.

- Indicator for Green Steady on The link of

40GE optical the port is
ports connected.

Green Blink (12 Hz) Data is being

sent or
received
through the
port.

- Off The link of

the port is
disconnected.

- Indicator for Green Steady on The link of

MGMT port the port is
connected.

Green Blink (12 Hz) Data is being

sent or
received
through the
port.

- Off The link of

the port is
disconnected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 308

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-124 Buttons on the USG6655E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-122 Ports on the USG6655E

1. HDD/SSD 2. GE electrical 3. 10GE optical 4. 40GE optical 5. USB 2.0 port

slot port port port

6. Console port 7. MGMT port - - -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 309

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-125 Ports on the USG6655E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20,
SSD-
SATA960G-B
disks are
supported.
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 310

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

GE electrical ports RJ45 16 10/100/1000M Ethernet Cable

(0 to 15) autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/0 to
GigabitEthernet
0/0/15.
NOTE
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.

10GE optical ports SFP+ 12 GE/10GE ● 1Gbps SFP

(0 to 11) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/11. Optical
Modules
When 40GE0/0/1
optical port on
the device is
enabled, the 10GE
optical ports
numbered from
XGigabitEthernet0
/0/8 to
XGigabitEthernet0
/0/11 cannot be
used.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 311

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

40GE optical ports QSFP+ Two 40GE 40Gbps QSFP+

(0 to 1) Ethernet optical Optical Modules
ports, numbered
from 40GE0/0/0
to 40GE0/0/1.
By default, the
40GE0/0/1 optical
port mode is
disabled. To
enable this mode,
run the set device
port-config-mode
40g-port enable
command.

USB 2.0 port USB 2.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 312

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

The power supply system has two PAC600S12-CB, PAC600S12-DB, or PAC600S12-
EB AC power modules for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system consists of four FAN-023A-B modules working in 3+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 313

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-123 System air flow of the USG6655E

Technical Specifications

Table 4-126 Technical specifications of the USG6655E-AC

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 600 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 420 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 16.54 in.)

Dimensions with packaging (H x W x 225 mm x 550 mm x 530 mm (8.86 in.

D) [mm(in.)] x 21.65 in. x 20.87 in.)

Chassis height [U] 1U

Weight with packaging [kg(lb)] 11.88 kg (26.19 lb)

Weight without packaging [kg(lb)] 7.75 kg (17.09 lb)

CPU 2 CPU, 16 cores/CPU, up to 1.85 GHz

Memory DDR4 32 GB, 16 GB/CPU

NOR Flash 128 MB, 64 MB/CPU

NAND Flash 2 GB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 314

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 156 W

Maximum heat dissipation [BTU/hour] 533.4 BTU/hour

MTBF [years] 31.63 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 2

Rated input voltage [V] 100 V to 240 V, 50 Hz/60 Hz

Input voltage range [V] 90 V to 290 V, 47 Hz to 63 Hz

Maximum input current [A] 8A

Maximum output power [W] 600 W

Types of fans Pluggable

Number of fan modules 4

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 40GE ports 2

Maximum number of 10GE ports 12

Maximum number of electrical ports 16

Redundant power supply 1+1

Redundant fans 3+1

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 315

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

4.1.22 USG6680E

Overview

Table 4-127 Basic information about the USG6680E

Description Part Number Model First supported
version

USG6680E AC 02351YRR USG6680E-AC V600R006C00

Host (28* (SFP+)
+ 4*QSFP + 2*HA,
2AC power
supply)

USG6680E AC 02351YRR-001 USG6680E-AC V600R007C20SPC

Host(28*(SFP+) 600
+4*QSFP+2*HA,
2AC power
supply)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 316

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-124 Appearance of the USG6680E (front view)

Figure 4-125 Appearance of the USG6680E (rear view)

Components

Figure 4-126 Components of the USG6680E

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Power -

module

Table 4-128 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 317

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN4, and the corresponding slot numbers are 4, 5, 6,
and 7 respectively.

Power module Provides power input and distribution for the device.
Two power modules are included in the standard
configuration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-127 Indicators and buttons on the USG6680E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 318

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. PWR, SYS, 2. 10GE optical 3. 10GE optical 4. 40GE 5. MGMT port

USB, HA, WAN port ACT port LINK Optical port indicator
and CLOUD indicator indicator indicator
indicators

6. RST button 7. OFL button - - -

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Table 4-129 Indicators on the USG6680E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 319

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 320

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinks once Management

every 2 backup device
seconds (0.5 in hot
Hz). standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

for 10GE Hz) sending or
optical ports receiving
data.

- Off The port is

not sending
or receiving
data.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 321

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- LINK indicator Green Steady on The port link

for 10GE is connected.
optical ports
- Off No link is
established
on the port.

- Indicator for Green Steady on The port link

40GE optical is connected.
ports
Green Blinking (12 The port is
Hz) sending or
receiving
data.

- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-130 Buttons on the USG6680E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 322

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Description

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-128 Ports on the USG6680E

1. HDD/SSD 2. 10GE optical 3. 40GE optical 4. HA port 5. USB 3.0 port

slot port port

6. Console port 7. MGMT port - - -

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 323

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-131 Ports on the USG6680E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20,
SSD-
SATA960G-B
disks are
supported.
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 324

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

10GE optical ports SFP+ 28 GE/10GE ● 1Gbps SFP

(0 to 27) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/27. Optical
Modules
When 40GE0/0/2
to 40GE0/0/3
optical ports on
the device are
enabled, the 10GE
optical ports
numbered from
XGigabitEthernet0
/0/20 to
XGigabitEthernet0
/0/27 cannot be
used.

40GE optical ports QSFP+ Four 40GE 40 Gbps QSFP+

(0 to 3) Ethernet optical Optical Module
ports, numbered
from 40GE0/0/0
to 40GE0/0/3.
By default, the
40GE0/0/2 to
40GE0/0/3 optical
ports mode are
disabled. To
enable this mode,
run the set device
port-config-mode
40g-port enable
command.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 325

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

HA ports(0 to 1) SFP+ Heartbeat 10Gbps SFP+

interfaces for hot Optical Modules
standby or the
cluster. Two
devices are
connected
through
independent links
to form hot
standby or the
cluster. numbered
from HA0/0/0 to
HA0/0/1.

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 326

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

Power Supply System

● Early delivery: The power supply system has two PAC1K2S12-B AC power
modules for 1+1 power redundancy.
● Later delivery: The power supply system has two PAC1K2S12-CB AC power
modules for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system consists of four FAN-036A-B modules working in 3+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 327

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-129 System air flow of the USG6680E

Technical Specifications

Table 4-132 Technical specifications of the USG6680E

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 800 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 600 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 23.62 in.)

Dimensions with packaging (H x W x 225 mm x 590 mm x 790 mm (8.86 in.

D) [mm(in.)] x 23.23 in. x 31.1 in.)

Chassis height [U] 1U

Weight without packaging [kg(lb)] 12 kg (26.46 lb)

CPU 2 CPU, 8 cores/CPU, up to 2.3 GHz

Memory DDR4 32 GB, 16 GB/CPU

Storage ● USG6680E-AC (02351YRR): 32GB

● USG6680E-AC (02351YRR-001): 32
GB

NOR Flash 64MB, 32MB/CPU

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 328

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 488.3 W

Maximum heat dissipation [BTU/hour] 1666.1 BTU/hour

MTBF [years] 25 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 2

Rated input voltage [V] ● AC power input: 100 V AC to 130 V

AC/200 V AC to 240 V AC, 50/60 Hz
● High-voltage DC power input: 240V

Input voltage range [V] AC power input: 90 V AC to 290 V AC,

47 Hz to 63 Hz

Rated output power [W] ● 800 W (100 V AC to 130 V AC)

● 1200 W (200 V AC to 240 V AC)
● 1200 W (240 V DC)

Types of fans Pluggable

Number of fan modules 4

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 40GE ports 4

Maximum number of 10GE ports 28

Redundant power supply 1+1

Redundant fans 3+1

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 329

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

4.1.23 USG6712E

Overview

Table 4-133 Basic information about the USG6712E

Description Part Number Model First supported
version

USG6712E-AC 02352CNL USG6712E-AC V600R006C00

Host (20* (SFP+)
+ 2*QSFP
+2*QSFP28
+ 2*HA,2AC power
supply)

USG6712E-AC 02352CNL-001 USG6712E V600R007C20SPC

Host(20*(SFP+) 600
+2*QSFP
+2*QSFP28+2*HA,
2AC power
supply)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 330

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-130 Appearance of the USG6712E (front view)

Figure 4-131 Appearance of the USG6712E (rear view)

Components

Figure 4-132 Components of the USG6712E

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Power -

module

Table 4-134 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 331

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN5, and the corresponding slot numbers are 4, 5, 6,
7, and 8 respectively.

Power module Provides power input and distribution for the device.
Two power modules are included in the standard
configuration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Indicators and Buttons

Figure 4-133 Indicators and buttons on the USG6712E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 332

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. PWR, SYS, 2. 10GE optical 3. 10GE optical 4. 40GE/100GE 5. MGMT port

USB, HA, WAN port ACT port LINK optical port indicator
and CLOUD indicator indicator indicator
indicators

6. RST button 7. OFL button - - -

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Table 4-135 Indicators on the USG6712E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Green Blinking four The system is

times every starting.
second (4 Hz)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 333

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 334

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinks once Management

every 2 backup device
seconds (0.5 in hot
Hz). standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

for 10GE Hz) sending or
optical ports receiving
data.

- Off The port is

not sending
or receiving
data.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 335

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- LINK indicator Green Steady on The port link

for 10GE is connected.
optical ports
- Off No link is
established
on the port.

- Indicator for Green Steady on The port link

40GE/100GE is connected.
optical ports
Green Blinking (12 The port is
Hz) sending or
receiving
data.

- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Table 4-136 Buttons on the USG6712E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 336

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Description

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-134 Ports on the USG6712E

1. HDD/SSD 2. 10GE optical 3. 40GE optical 4. HA port 5. USB 3.0 port

slot port port

6. Console port 7. MGMT port 8. 100GE - -

optical port

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 337

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-137 Ports on the USG6712E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20,
SSD-
SATA960G-B
disks are
supported.
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 338

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

10GE optical ports SFP+ 20 GE/10GE ● 1Gbps SFP

(0 to 19) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/19. Optical
Modules
When 100GE0/0/0
to 100GE0/0/1
optical ports on
the device are
enabled, the 10GE
optical ports
numbered from
XGigabitEthernet0
/0/12 to
XGigabitEthernet0
/0/19 cannot be
used.

40GE optical ports QSFP+ Four 40GE 40Gbps QSFP+

(0 to 3) Ethernet optical Optical Modules
ports, numbered
from 40GE0/0/0
to 40GE0/0/3.
40GE optical ports
40GE0/0/2 and
40GE0/0/3 can be
switched to
100GE optical
ports.

HA ports(0 to 1) SFP+ Heartbeat 10Gbps SFP+

interfaces for hot Optical Modules
standby or the
cluster. Two
devices are
connected
through
independent links
to form hot
standby or the
cluster. numbered
from HA0/0/0 to
HA0/0/1.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 339

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 340

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

100GE optical QSFP28 Two 100GE 100Gbps QSFP28

ports (0 to 1) Ethernet optical Optical Modules
ports, numbered
100GE0/0/0 and
100GE0/0/1.
By default, the
100GE optical
port mode is
disabled. To
enable this mode,
run the set device
port-config-mode
100g-port enable
command.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 341

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Power Supply System

● Early delivery: The power supply system has two PAC1K2S12-B AC power
modules for 1+1 power redundancy.
● Later delivery: The power supply system has two PAC1K2S12-CB AC power
modules for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system consists of five FAN-036A-B modules working in 4+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Figure 4-135 System air flow of the USG6712E

Technical Specifications

Table 4-138 Technical specifications of the USG6712E

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 800 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 600 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 23.62 in.)

Dimensions with packaging (H x W x 225 mm x 590 mm x 790 mm (8.86 in.

D) [mm(in.)] x 23.23 in. x 31.1 in.)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 342

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Chassis height [U] 1U

Weight with packaging [kg(lb)] 17.6 kg (38.8 lb)

Weight without packaging [kg(lb)] 12 kg (26.46 lb)

CPU 2 CPU, 14 cores/CPU, up to 1.9 GHz

Memory DDR4 64GB, 32GB/CPU

Storage ● USG6712E (02352CNL-001): 32 GB

● USG6712E-AC (02352CNL): 32GB

NOR Flash 64MB, 32MB/CPU

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 566 W

Maximum heat dissipation [BTU/hour] 1935.27 BTU/hour

MTBF [years] 25 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 2

Rated input voltage [V] ● AC power input: 100 V AC to 130 V

AC/200 V AC to 240 V AC, 50/60 Hz
● High-voltage DC power input: 240V

Input voltage range [V] AC power input: 90 V AC to 290 V AC,

47 Hz to 63 Hz

Rated output power [W] ● 800 W (100 V AC to 130 V AC)

● 1200 W (200 V AC to 240 V AC)
● 1200 W (240 V DC)

Types of fans Pluggable

Number of fan modules 5

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 343

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 100GE ports 2

Maximum number of 40GE ports 4

Maximum number of 10GE ports 20

Redundant power supply 1+1

Redundant fans 4+1

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

4.1.24 USG6716E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 344

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Overview

Table 4-139 Basic information about the USG6716E

Description Part Number Model First supported
version

USG6716E-AC 02351YRS USG6716E-AC V600R006C00

Host (20* (SFP+)
+ 2*QSFP
+2*QSFP28
+ 2*HA,2AC power
supply)

USG6716E-AC 02351YRS-001 USG6716E V600R007C20SPC

Host(20*(SFP+) 600
+2*QSFP
+2*QSFP28+2*HA,
2AC power
supply)

Appearance

Figure 4-136 Appearance of the USG6716E (front view)

Figure 4-137 Appearance of the USG6716E (rear view)

Components

Figure 4-138 Components of the USG6716E

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 345

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. Product 2. Indicator 3. HDD/SSD 4. Fixed 5. Protective

series ID and button slot interface area ground
area terminal

6. MAC label 7. SN label 8. Fan module 9. Power -

module

Table 4-140 Component functions

Name Description

Product series ID Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.

Indicator and button Provides multiple indicators to display the running

area status of the device in real time and provides the RST
button for emergency maintenance.

HDD/SSD slot Houses hard disks for storing log and report data.

Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.

Protective ground Connects the M4 OT terminal of a PGND cable to the

terminal cabinet or the ground bar in the equipment room.

MAC label Uniquely identifies the MAC address of the device,

which is required during network forwarding
configuration.

SN label Uniquely identifies the device, which needs to be

provided for the local technical support personnel to
apply for a license.

Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
The silkscreens of the fan module slots are FAN1 to
FAN5, and the corresponding slot numbers are 4, 5, 6,
7, and 8 respectively.

Power module Provides power input and distribution for the device.
Two power modules are included in the standard
configuration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
The silkscreens of the power module slots are PWR1
and PWR2, and the corresponding slot numbers are 2
and 3 respectively.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 346

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Indicators and Buttons

Figure 4-139 Indicators and buttons on the USG6716E

1. PWR, SYS, 2. 10GE optical 3. 10GE optical 4. 40GE/100GE 5. MGMT port

USB, HA, WAN port ACT port LINK optical port indicator
and CLOUD indicator indicator indicator
indicators

6. RST button 7. OFL button - - -

NOTE

Arrowheads of optical ports show the positions of the ports. A down arrowhead indicates a
port in the upper part, and an up arrowhead indicates a port in the lower part.

Table 4-141 Indicators on the USG6716E

Silkscreen Name Color Status Description

PWR Power Green Steady on The power

indicator module is
working
properly.

- Off The power

module is
faulty or the
device is not
powered on.

SYS SYS indicator Green Steady on The system is

being
powered on
or restarted.

Green Blinks once The system is

every 2 running
seconds (0.5 normally.
Hz).

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 347

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking four The system is

times every starting.
second (4 Hz)

Red Steady on ● The system

is faulty.
● The power
supply is
abnormal.
● The fan
module is
abnormal.
NOTE
If the system
starts with
two power
modules and
one power
module is not
powered on,
the SYS
indicator is
steady red,
but the
system is
running
properly.

- Off The system is

not running.

USB USB indicator Green Steady on USB-based

deployment
has been
completed.

Green Blinking four The system is

times every reading data
second (4 Hz) from the USB
flash drive.

Red Steady on USB-based

deployment
fails.

- Off USB-based
deployment is
disabled
(default
state).

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 348

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

HA HA indicator Green Steady on Management

master device
in hot
standby or
clusterdeploy
ment.

Green Blinks once Management

every 2 backup device
seconds (0.5 in hot
Hz). standby or
cluster
deployment.

Red Steady on Hot standby

or the cluster
is faulty.

- Off The hot

standby or
the cluster
function is
disabled.

WAN WAN - Off Reserved

indicator function. This
function is
not enabled.

CLOUD CLOUD Green Steady on Connected to

indicator the cloud
management
platform.

Green Blinking four Connecting to

times every the cloud
second (4 Hz) management
platform,
transmitting
or receiving
data.

- Off The device is

not connected
to the cloud
management
platform.

- ACT indicator Yellow Blinking (12 The port is

for 10GE Hz) sending or
optical ports receiving
data.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 349

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off The port is

not sending
or receiving
data.

- LINK indicator Green Steady on The port link

for 10GE is connected.
optical ports
- Off No link is
established
on the port.

- Indicator for Green Steady on The port link

40GE/100GE is connected.
optical ports
Green Blinking (12 The port is
Hz) sending or
receiving
data.

- Off No link is
established
on the port.

- MGMT port Green Steady on The port link

indicator is connected.

Green Blinking (12 The port is

Hz) sending or
receiving
data.

- Off No link is
established
on the port.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 350

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-142 Buttons on the USG6716E

Silkscreen Name Description

RST RST button To restart the device,

press the RST button.
Ensure that the running
configuration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be specific, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.

OFL OFL button To remove a hard disk,

press and hold the OFL
button for four seconds
until the OFL indicator
turns on.

Ports

Figure 4-140 Ports on the USG6716E

1. HDD/SSD 2. 10GE optical 3. 40GE optical 4. HA port 5. USB 3.0 port

slot port port

6. Console port 7. MGMT port 8. 100GE - -

optical port

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 351

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-143 Ports on the USG6716E

Port Connector Type Description Available
Components

HDD/SSD Hard - The hard disks are ● Hard Disk

disk slot optional. You can Unit SSD-
purchase hard Sata240G-A
disk from Huawei ● Hard Disk
if needed. Unit SSD-
SATA240G-C
● Hard Disk
Unit SSD-
SATA960G-B
● Hard Disk
Unit SSD-
SATA960G-C
● Hard Disk
Unit HDD-
SATA1000G-A
NOTE
● From
V600R007C20,
SSD-
SATA960G-B
disks are
supported.
● From
V600R007C20S
PC600, SSD-
SATA240G-C
disks are
supported.
● From
V600R007C20S
PC602, SSD-
SATA960G-C
disks are
supported.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 352

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

10GE optical ports SFP+ 20 GE/10GE ● 1Gbps SFP

(0 to 19) autosensing Copper
Ethernet optical Modules
ports, numbered ● 1Gbps eSFP
from Optical
XGigabitEthernet0 Modules
/0/0 to
XGigabitEthernet0 ● 10Gbps SFP+
/0/19. Optical
Modules
When 100GE0/0/0
to 100GE0/0/1
optical ports on
the device are
enabled, the 10GE
optical ports
numbered from
XGigabitEthernet0
/0/12 to
XGigabitEthernet0
/0/19 cannot be
used.

40GE optical ports QSFP+ Four 40GE 40Gbps QSFP+

(0 to 3) Ethernet optical Optical Modules
ports, numbered
from 40GE0/0/0
to 40GE0/0/3.
40GE optical ports
40GE0/0/2 and
40GE0/0/3 can be
switched to
100GE optical
ports.

HA ports(0 to 1) SFP+ Heartbeat 10Gbps SFP+

interfaces for hot Optical Modules
standby or the
cluster. Two
devices are
connected
through
independent links
to form hot
standby or the
cluster. numbered
from HA0/0/0 to
HA0/0/1.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 353

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

USB 3.0 port USB 3.0 Type A USB ports allow USB flash drive
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.

Console port RJ45 Console ports Console Cable

allow you to
locally connect a
PC to the device.
You can use a
console cable to
connect the
console port
(RJ45) on the
device to the
COM port on your
PC and use a
serial port
terminal program
on your PC to
access, configure,
and manage the
device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 354

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

MGMT port RJ45 Out-of-band Ethernet Cable

10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to configure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.

100GE optical QSFP28 Two 100GE 100Gbps QSFP28

ports (0 to 1) Ethernet optical Optical Modules
ports, numbered
100GE0/0/0 and
100GE0/0/1.
By default, the
100GE optical
port mode is
disabled. To
enable this mode,
run the set device
port-config-mode
100g-port enable
command.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 355

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Power Supply System

● Early delivery: The power supply system has two PAC1K2S12-B AC power
modules for 1+1 power redundancy.
● Later delivery: The power supply system has two PAC1K2S12-CB AC power
modules for 1+1 power redundancy.

Heat Dissipation System

The heat dissipation system consists of five FAN-036A-B modules working in 4+1
backup mode. From the front panel, the device provides a front-to-rear air flow.
The fan module locates at the air exhaust of the system.

Figure 4-141 System air flow of the USG6716E

Technical Specifications

Table 4-144 Technical specifications of the USG6716E

Item Specification

Installation Type Rack

Cabinet installation standard Cabinet with a depth of 800 mm or

above

Dimensions without packaging (H x W 43.6 mm x 442 mm x 600 mm (1.72 in.

x D) [mm(in.)] x 17.4 in. x 23.62 in.)

Dimensions with packaging (H x W x 225 mm x 590 mm x 790 mm (8.86 in.

D) [mm(in.)] x 23.23 in. x 31.1 in.)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 356

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Chassis height [U] 1U

Weight with packaging [kg(lb)] 17.6 kg (38.8 lb)

Weight without packaging [kg(lb)] 12 kg (26.46 lb)

CPU 2 CPU, 14 cores/CPU, up to 1.9 GHz

Memory DDR4 64GB, 32GB/CPU

Storage ● USG6716E (02351YRS-001): 32 GB

● USG6716E-AC (02351YRS): 32GB

NOR Flash 64MB, 32MB/CPU

Hard disk Optional. You can purchase a 2.5-inch

SATA hard disk (240 GB/960 GB/1000
GB) from Huawei based on the site
requirements. The hard disk is hot
swappable.

Console port RJ45

Eth Management port RJ45

Maximum power consumption [W] 566 W

Maximum heat dissipation [BTU/hour] 1935.27 BTU/hour

MTBF [years] 25 years

MTTR [hours] 2 hours

Power supply mode AC built-in

Number of power modules 2

Rated input voltage [V] ● AC power input: 100 V AC to 130 V

AC/200 V AC to 240 V AC, 50/60 Hz
● High-voltage DC power input: 240V

Input voltage range [V] AC power input: 90 V AC to 290 V AC,

47 Hz to 63 Hz

Rated output power [W] ● 800 W (100 V AC to 130 V AC)

● 1200 W (200 V AC to 240 V AC)
● 1200 W (240 V DC)

Types of fans Pluggable

Number of fan modules 5

Heat dissipation mode The fan module locates at the air

exhaust of the system.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 357

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Airflow direction Air inlet from front and air outlet from
rear

Maximum number of 100GE ports 2

Maximum number of 40GE ports 4

Maximum number of 10GE ports 20

Redundant power supply 1+1

Redundant fans 4+1

Long-term operating temperature ● Without hard disk driver: 0°C to

[°C(°F)] 45°C
● With hard disk driver: 5°C to 40°C

Storage temperature [°C(°F)] -40°C to 70°C

Long-term operating relative humidity 5% RH to 95% RH, non-condensing

[RH]

Storage relative humidity [RH] 5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)] ● Without hard disk driver: 0 m to

5000 m
● With hard disk driver: 0 m to 3000
m

Storage altitude [m(ft.)] 0 m to 5000 m

NOTE

● The width does not include the size of mounting ears.

● The height is 1U (1U = 1.75 inches, or about 44.45 mm), which is a height unit defined
in International Electrotechnical Commission (IEC) 60297 standards.
● Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the
rack when no protection plate exists before or after the rack.
● The operating temperature change rate of a device with HDDs must be less than or
equal to 20°C/hour.

4.2 Power Modules

This chapter describes hardware information for power modules of the USG6000E,
including hardware appearance, functions, and technical specifications.

4.2.1 HW-120300D1D (02220947: 36W AC Power Module)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 358

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Overview

Table 4-145 Basic information about the HW-120300D1D

Item Details

Description 36W AC Power Module

Part Number 02220947

Model HW-120300D1D

Appearance

Figure 4-142 Appearance of the HW-120300D1D

Version Mapping

Table 4-146 Mappings between HW-120300D1D and product models

Product Product Model First Supported Version

USG6530E USG6530E-AC V600R006C00

(02352QVD)

USG6510E USG6510E-AC V600R006C00

(02352PQH)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 359

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features

Table 4-147 Functions and features of the HW-120300D1D

Functions and Features Description

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Heat dissipation The power adapter does not have fans

and uses natural cooling.

Technical Specifications

Table 4-148 Technical specifications of the HW-120300D1D

Item Specification

Dimensions without packaging (H x W 32 mm x 53.95 mm x 99.45 mm (1.26

x D) [mm(in.)] in. x 2.12 in. x 3.92 in.)

Weight without packaging [kg(lb)] 0.205 kg (0.45 lb)

Number of inputs 1

Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz)

Input voltage range [V] 90 V AC to 264 V AC (47 Hz to 63 Hz)

Maximum input current [A] 1A

Rated output voltage [V] 12V DC

Rated output current [A] 3A

Rated output power [W] 36 W

Type of power cables C7

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 360

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.2.2 HW-120300D1D (02221468: 36W AC Power Module)

Overview

Table 4-149 Basic information about the HW-120300D1D

Item Details

Description 36W AC Power Module

Part Number 02221468

Model HW-120300D1D

Appearance

Figure 4-143 Appearance of the HW-120300D1D

Version Mapping

Table 4-150 Mappings between HW-120300D1D and product models

Product Product Model First Supported Version

USG6530E USG6530E-AC V600R006C00

(02352QVD)

USG6530E USG6530E-AC V600R007C20SPC300

(02352QVD-001)

USG6530E USG6530E-AC V600R007C20SPC600

(02352QVD-002)

USG6510E USG6510E-AC V600R006C00

(02352PQH)

USG6510E USG6510E-AC V600R007C20SPC300

(02352PQH-001)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 361

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6510E USG6510E-AC V600R007C20SPC600

(02352PQH-002)

Functions and Features

Table 4-151 Functions and features of the HW-120300D1D

Functions and Features Description

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Heat dissipation The power adapter does not have fans

and uses natural cooling.

Technical Specifications

Table 4-152 Technical specifications of the HW-120300D1D

Item Specification

Dimensions without packaging (H x W 32 mm x 53.95 mm x 99.45 mm (1.26

x D) [mm(in.)] in. x 2.12 in. x 3.92 in.)

Weight without packaging [kg(lb)] 0.205 kg (0.45 lb)

Number of inputs 1

Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz)

Input voltage range [V] 90 V AC to 264 V AC (47 Hz to 63 Hz)

Maximum input current [A] 1A

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 362

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Rated output voltage [V] 12V DC

Rated output current [A] 3A

Rated output power [W] 36 W

Type of power cables C7

4.2.3 HW-560268D0D (150W AC Power Module)

Overview

Table 4-153 Basic information about the HW-560268D0D

Item Details

Description 150W AC Power Module

Part Number 02221024

Model HW-560268D0D

Appearance

Figure 4-144 Appearance of the HW-560268D0D

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 363

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Version Mapping

Table 4-154 Mappings between HW-560268D0D and product models

Product Product Model First Supported Version

USG6510E-POE USG6510E-POE-AC V600R006C00

(02352CSC)

Functions and Features

Table 4-155 Functions and features of the HW-560268D0D

Functions and Features Description

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Heat dissipation The power adapter does not have fans

and uses natural cooling.

Technical Specifications

Table 4-156 Technical specifications of the HW-560268D0D

Item Specification

Dimensions without packaging (H x W 42 mm x 80 mm x 180 mm (1.65 in. x

x D) [mm(in.)] 3.15 in. x 7.09 in.)

Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)

Number of inputs 1

Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 364

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Input voltage range [V] 90 V AC to 290 V AC (47 Hz to 63 Hz)

Maximum input current [A] 2A

Rated output voltage [V] 55.5V DC

Rated output current [A] 2.68 A

Rated output power [W] 150 W

Type of power cables C7

4.2.4 PAC150S12-R (150W AC Power Module)

Overview

Table 4-157 Basic information about the PAC150S12-R

Item Details

Description 150W AC Power Module

Part Number 02312DUY

Model PAC150S12-R

Appearance

Figure 4-145 Appearance of the PAC150S12-R

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 365

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Version Mapping

Table 4-158 Mappings between PAC150S12-R and product models

Product Product Model First Supported Version

USG6575E-B USG6575E-B-AC V600R007C20

(02353LKD)

USG6575E-B USG6575E-B-AC V600R007C20SPC600

(02353LKD-002)

USG6605E-B USG6605E-B-AC V600R007C20

(02353PSK)

USG6605E-B USG6605E-B-AC V600R007C20SPC600

(02353PSK-001)

Panel

Figure 4-146 Panel of the PAC150S12-R

1. Power status indicator 2. Power receptacle 3. Clip hole

Table 4-159 Indicators on the PAC150S12-R

Silkscreen Name Color Status Description

STAT Power status Green Steady on The output of

indicator the AC power
module is
normal.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 366

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking The output

power is out
of range. For
example,
overvoltage,
overcurrent,
or short
circuit has
occurred.

- Off ● The input

of the AC
power
module is
out of
range. For
example,
no AC
input, AC
input
overvoltag
e, or AC
input
undervolta
ge has
occurred.
● The output
of the AC
power
module is
out of
range. For
example,
undervolta
ge, or
overtempe
rature has
occurred.

Table 4-160 Ports on the PAC150S12-R

Port Connector Type Description Available

Components

Power receptacle - Connects the C13 -

plug of the AC
power cable. For
details, see AC
Power Cables.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 367

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Clip hole - The hole is used -

to install the
power cable clip,
which is used to
bind and fix the
power cable. The
power cable clip is
installed before
shipment.

Functions and Features

Table 4-161 Functions and features of the PAC150S12-R

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Heat dissipation The power adapter does not have fans.

The heat dissipation is provided by the
fan module of the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 368

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features Description

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a
power module without interrupting
device operation.

Technical Specifications

Table 4-162 Technical specifications of the PAC150S12-R

Item Specification

Dimensions without packaging (H x W 39.8 mm x 90 mm x 214.3 mm (1.57

x D) [mm(in.)] in. x 3.54 in. x 8.43 in.)

Weight without packaging [kg(lb)] 0.761 kg (1.68 lb)

Number of inputs 1

Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz)

Input voltage range [V] 90 V AC to 264 V AC (47 Hz to 63 Hz)

Maximum input current [A] 3A

Rated output voltage [V] 12 V

Rated output current [A] 12.5 A

Rated output power [W] 150 W

Hot swapping Supported

Type of power cables C13

4.2.5 PAC1K2S12-B (1200W AC Power Module(Power panel

side exhaust))

Overview

Table 4-163 Basic information about the PAC1K2S12-B

Item Details

Description 1200W AC Power Module(Power panel

side exhaust)

Part Number 02312DUM

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 369

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Details

Model PAC1K2S12-B

Appearance

Figure 4-147 Appearance of the PAC1K2S12-B

Version Mapping

Table 4-164 Mappings between PAC1K2S12-B and product models

Product Product Model First Supported Version

USG6716E USG6716E-AC V600R006C00

(02351YRS)

USG6680E USG6680E-AC V600R006C00

(02351YRR)

USG6712E USG6712E-AC V600R006C00

(02352CNL)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 370

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Panel

Figure 4-148 Panel of the PAC1K2S12-B

1. Power status indicator 2. Power receptacle

Table 4-165 Indicators on the PAC1K2S12-B

Silkscreen Name Color Status Description

STAT Power status Green Steady on The power

indicator module is
working
normally.

Green Blinking The power

module is in
loading or
standby state,
or the power
cable has
been
connected but
the power
module is not
installed in
the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 371

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Steady on ● Fans of the

power
module
fail.
● The power
module is
in
overtempe
rature
protection
state.
● The power
input is
abnormal
(input
undervolta
ge or input
overvoltag
e).
● The power
output is
abnormal
(output
overcurren
t, output
short-
circuit, or
output
overvoltag
e).

- Off The power

module
receives no
power input.

Table 4-166 Ports on the PAC1K2S12-B

Port Connector Type Description Available
Components

Power receptacle - Connects the C13 -

plug of the AC
power cable. For
details, see AC
Power Cables.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 372

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features

Table 4-167 Functions and features of the PAC1K2S12-B

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overvoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Heat dissipation The heat dissipation is provided by the

fan of the power module.

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a
power module without interrupting
device operation.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 373

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-168 Technical specifications of the PAC1K2S12-B

Item Specification

Dimensions without packaging (H x W 39.6 mm x 66 mm x 374 mm (1.56 in.

x D) [mm(in.)] x 2.6 in. x 14.72 in.)

Weight without packaging [kg(lb)] 1.4 kg (3.09 lb)

Rated input voltage [V] - Rated AC input voltage range:

•100 V AC to 130 V AC, 50/60 Hz
•200 V AC to 240 V AC, 50/60 Hz
- Rated voltage of 240 V high-voltage
DC power input: 240 V DC

Input voltage range [V] ● Maximum AC input voltage range:

90 to 290 V AC, 47 to 63 Hz
● Maximum voltage range of 240 V
high-voltage DC power input:188 V
DC to 290 V DC

Rated input current [A] 10 A (100 V AC to 130 V AC), 8 A (200

V AC to 240 V AC), 8 A (240 V DC)

Rated output voltage [V] 12 V

Rated output current [A] ● 67 A (100 V AC to 130 V AC)

● 100 A (200 V AC to 240 V AC)
● 100 A (240 V DC)

Rated output power [W] ● 800 W (100 V AC to 130 V AC)

● 1200 W (200 V AC to 240 V AC)
● 1200 W (240 V DC)

Hot swapping Supported

Type of power cables C13

4.2.6 PAC1K2S12-CB (1200W AC&240V DC Power Module

(Back to Front,Power panel side air-out))

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 374

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Overview

Table 4-169 Basic information about the PAC1K2S12-CB

Item Details

Description 1200W AC&240V DC Power Module

(Back to Front,Power panel side air-
out)

Part Number 02312VLE

Model PAC1K2S12-CB

Appearance

Figure 4-149 Appearance of the PAC1K2S12-CB

Version Mapping

Table 4-170 Mappings between PAC1K2S12-CB and product models

Product Product Model First Supported Version

USG6716E USG6716E-AC V600R007C20SPC300

(02351YRS)

USG6716E USG6716E-AC V600R007C20SPC600

(02351YRS-001)

USG6680E USG6680E-AC V600R007C20SPC300

(02351YRR)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 375

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6680E USG6680E-AC V600R007C20SPC600

(02351YRR-001)

USG6712E USG6712E-AC V600R007C20SPC300

(02352CNL)

USG6712E USG6712E-AC V600R007C20SPC600

(02352CNL-001)

Panel

Figure 4-150 Panel of the PAC1K2S12-CB

1. Power status indicator 2. Power receptacle

Table 4-171 Indicators on the PAC1K2S12-CB

Silkscreen Name Color Status Description

STAT Power status Green Steady on The power

indicator module is
working
normally.

Green Blinking The power

module is in
loading or
standby state,
or the power
cable has
been
connected but
the power
module is not
installed in
the device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 376

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Steady on ● Fans of the

power
module
fail.
● The power
module is
in
overtempe
rature
protection
state.
● The power
input is
abnormal
(input
undervolta
ge or input
overvoltag
e).
● The power
output is
abnormal
(output
overcurren
t, output
short-
circuit, or
output
overvoltag
e).

- Off The power

module
receives no
power input.

Table 4-172 Ports on the PAC1K2S12-CB

Port Connector Type Description Available
Components

Power receptacle - Connects the C13 -

plug of the AC
power cable. For
details, see AC
Power Cables.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 377

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features

Table 4-173 Functions and features of the PAC1K2S12-CB

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overvoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Heat dissipation The heat dissipation is provided by the

fan of the power module.

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a
power module without interrupting
device operation.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 378

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-174 Technical specifications of the PAC1K2S12-CB

Item Specification

Dimensions without packaging (H x W 39.6 mm x 66 mm x 374 mm (1.56 in.

x D) [mm(in.)] x 2.6 in. x 14.72 in.)

Weight without packaging [kg(lb)] 1.2 kg (2.65 lb)

Rated input voltage [V] - Rated AC input voltage range:

•100 V AC to 130 V AC, 50/60 Hz
•200 V AC to 240 V AC, 50/60 Hz
- Rated voltage of 240 V high-voltage
DC power input: 240 V DC

Input voltage range [V] ● Maximum AC input voltage range:

90 to 290 V AC, 47 to 63 Hz
● Maximum voltage range of 240 V
high-voltage DC power input:188 V
DC to 290 V DC

Rated input current [A] 10 A (100 V AC to 130 V AC), 8 A (200

V AC to 240 V AC), 8 A (240 V DC)

Rated output voltage [V] 12 V

Rated output current [A] ● 67 A (100 V AC to 130 V AC)

● 100 A (200 V AC to 240 V AC)
● 100 A (240 V DC)

Rated output power [W] ● 800 W (100 V AC to 130 V AC)

● 1200 W (200 V AC to 240 V AC)
● 1200 W (240 V DC)

Hot swapping Supported

Type of power cables C13

4.2.7 PAC600S12-B (600W AC Power Module(Back to Front,

Power panel side exhaust))

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 379

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Overview

Table 4-175 Basic information about the PAC600S12-B

Item Details

Description 600W AC Power Module(Back to

Front, Power panel side exhaust)

Part Number 02312DUP

Model PAC600S12-B

Appearance

Figure 4-151 Appearance of the PAC600S12-B

Version Mapping

Table 4-176 Mappings between PAC600S12-B and product models

Product Product Model First Supported Version

USG6650E USG6650E-AC V600R006C00

(02351YRY)

USG6630E USG6630E-AC V600R006C00

(02352FQA)

USG6620E USG6620E-AC V600R007C20SPC100

(02352HMF)

USG6610E USG6610E-AC V600R007C20SPC100

(02352HMD)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 380

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Panel

Figure 4-152 Panel of the PAC600S12-B

1. Power status indicator 2. Power receptacle 3. Clip hole

Table 4-177 Indicators on the PAC600S12-B

Silkscreen Name Color Status Description

STAT Power status Green Steady on The output of

indicator the AC power
module is
normal.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 381

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off ● The input

of the AC
power
module is
out of
range. For
example,
no AC
input, AC
input
overvoltag
e, or AC
input
undervolta
ge has
occurred.
● The output
of the AC
power
module is
out of
range. For
example,
undervolta
ge, or
overtempe
rature has
occurred.

Table 4-178 Ports on the PAC600S12-B

Port Connector Type Description Available

Components

Power receptacle - Connects the C13 -

plug of the AC
power cable. For
details, see AC
Power Cables.

Clip hole - The hole is used -

to install the
power cable clip,
which is used to
bind and fix the
power cable. The
power cable clip is
installed before
shipment.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 382

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features

Table 4-179 Functions and features of the PAC600S12-B

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overvoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Heat dissipation The heat dissipation is provided by the

fan of the power module.

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a
power module without interrupting
device operation.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 383

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-180 Technical specifications of the PAC600S12-B

Item Specification

Dimensions without packaging (H x W 39.8 mm x 90 mm x 215 mm (1.57 in.

x D) [mm(in.)] x 3.54 in. x 8.46 in.)

Weight without packaging [kg(lb)] 0.97 kg (2.14 lb)

Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz)

Input voltage range [V] 90 V AC to 290 V AC (47 Hz to 63 Hz)

Maximum input current [A] 9A

Rated output voltage [V] 12 V

Rated output current [A] 50 A

Rated output power [W] 600 W

Hot swapping Supported

Type of power cables C13

4.2.8 PAC600S12-CB (600W AC Power Module(Back to Front,

Power panel side exhaust))

Overview

Table 4-181 Basic information about the PAC600S12-CB

Item Details

Description 600W AC Power Module(Back to

Front, Power panel side exhaust)

Part Number 02312FFU

Model PAC600S12-CB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 384

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-153 Appearance of the PAC600S12-CB

Version Mapping

Table 4-182 Mappings between PAC600S12-CB and product models

Product Product Model First Supported Version

USG6650E USG6650E-AC V600R007C20SPC300

(02351YRY-001)

USG6650E USG6650E-AC V600R007C20SPC600

(02351YRY-002)

USG6585E USG6585E-AC V600R007C00

(02353ADA)

USG6525E USG6525E-AC V600R007C00

(02353AFX)

USG6635E USG6635E-AC V600R007C00

(02352RQD)

USG6625E USG6625E-AC V600R007C00

(02352RQN)

USG6615E USG6615E-AC V600R007C00

(02352RQL)

USG6630E USG6630E-AC V600R007C20SPC300

(02352FQA-001)

USG6630E USG6630E-AC V600R007C20SPC600

(02352FQA-002)

USG6565E USG6565E-AC V600R007C00

(02353AEJ)

USG6620E USG6620E-AC V600R007C20SPC300

(02352HMF-001)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 385

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6620E USG6620E-AC V600R007C20SPC600

(02352HMF-002)

USG6555E USG6555E-AC V600R007C00

(02353AEK)

USG6610E USG6610E-AC V600R007C20SPC300

(02352HMD-001)

USG6610E USG6610E-AC V600R007C20SPC600

(02352HMD-002)

USG6655E USG6655E-AC V600R007C00

(02352RPS)

Panel

Figure 4-154 Panel of the PAC600S12-CB

1. Power status indicator 2. Power receptacle 3. Clip hole

Table 4-183 Indicators on the PAC600S12-CB

Silkscreen Name Color Status Description

STAT Power status Green Steady on The output of

indicator the AC power
module is
normal.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 386

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off ● The input

of the AC
power
module is
out of
range. For
example,
no AC
input, AC
input
overvoltag
e, or AC
input
undervolta
ge has
occurred.
● The output
of the AC
power
module is
out of
range. For
example,
undervolta
ge, or
overtempe
rature has
occurred.

Table 4-184 Ports on the PAC600S12-CB

Port Connector Type Description Available

Components

Power receptacle - Connects the C13 -

plug of the AC
power cable. For
details, see AC
Power Cables.

Clip hole - The hole is used -

to install the
power cable clip,
which is used to
bind and fix the
power cable. The
power cable clip is
installed before
shipment.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 387

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features

Table 4-185 Functions and features of the PAC600S12-CB

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overvoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Heat dissipation The heat dissipation is provided by the

fan of the power module.

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a
power module without interrupting
device operation.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 388

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-186 Technical specifications of the PAC600S12-CB

Item Specification

Dimensions without packaging (H x W 39.6 mm x 90 mm x 214.5 mm (1.56

x D) [mm(in.)] in. x 3.54 in. x 8.45 in.)

Weight without packaging [kg(lb)] 0.95 kg (2.09 lb)

Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz)

Input voltage range [V] 90 V AC to 290 V AC (47 Hz to 63 Hz)

Maximum input current [A] 8A

Rated output voltage [V] 12 V

Rated output current [A] 50 A

Rated output power [W] 600 W

Hot swapping Supported

Type of power cables C13

4.2.9 PAC600S12-DB (600W AC Power Module(Back to Front,

Power panel side exhaust))

Overview

Table 4-187 Basic information about the PAC600S12-DB

Item Details

Description 600W AC Power Module(Back to

Front, Power panel side exhaust)

Part Number 02131740

Model PAC600S12-DB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 389

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-155 Appearance of the PAC600S12-DB

Version Mapping

Table 4-188 Mappings between PAC600S12-DB and product models

Product Product Model First Supported Version

USG6650E USG6650E-AC V600R007C20SPC300

(02351YRY)

USG6650E USG6650E-AC V600R007C20SPC300

(02351YRY-001)

USG6650E USG6650E-AC V600R007C20SPC600

(02351YRY-002)

USG6635E USG6635E-AC V600R007C20SPC300

(02352RQD)

USG6625E USG6625E-AC V600R007C20SPC300

(02352RQN)

USG6615E USG6615E-AC V600R007C20SPC300

(02352RQL)

USG6630E USG6630E-AC V600R007C20SPC300

(02352FQA)

USG6630E USG6630E-AC V600R007C20SPC300

(02352FQA-001)

USG6630E USG6630E-AC V600R007C20SPC600

(02352FQA-002)

USG6620E USG6620E-AC V600R007C20SPC300

(02352HMF)

USG6620E USG6620E-AC V600R007C20SPC300

(02352HMF-001)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 390

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6620E USG6620E-AC V600R007C20SPC600

(02352HMF-002)

USG6610E USG6610E-AC V600R007C20SPC300

(02352HMD)

USG6610E USG6610E-AC V600R007C20SPC300

(02352HMD-001)

USG6610E USG6610E-AC V600R007C20SPC600

(02352HMD-002)

USG6655E USG6655E-AC V600R007C20SPC300

(02352RPS)

Panel

Figure 4-156 Panel of the PAC600S12-DB

1. Power status indicator 2. Power receptacle 3. Clip hole

Table 4-189 Indicators on the PAC600S12-DB

Silkscreen Name Color Status Description

STAT Power status Green Steady on The output of

indicator the AC power
module is
normal.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 391

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off ● The input

of the AC
power
module is
out of
range. For
example,
no AC
input, AC
input
overvoltag
e, or AC
input
undervolta
ge has
occurred.
● The output
of the AC
power
module is
out of
range. For
example,
undervolta
ge, or
overtempe
rature has
occurred.

Table 4-190 Ports on the PAC600S12-DB

Port Connector Type Description Available

Components

Power receptacle - Connects the C13 -

plug of the AC
power cable. For
details, see AC
Power Cables.

Clip hole - The hole is used -

to install the
power cable clip,
which is used to
bind and fix the
power cable. The
power cable clip is
installed before
shipment.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 392

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features

Table 4-191 Functions and features of the PAC600S12-DB

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overvoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Heat dissipation The heat dissipation is provided by the

fan of the power module.

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a
power module without interrupting
device operation.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 393

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-192 Technical specifications of the PAC600S12-DB

Item Specification

Dimensions without packaging (H x W 39.6 mm x 90 mm x 214.5 mm (1.56

x D) [mm(in.)] in. x 3.54 in. x 8.45 in.)

Weight without packaging [kg(lb)] 0.95 kg (2.09 lb)

Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz)

Input voltage range [V] 90 V AC to 290 V AC (47 Hz to 63 Hz)

Maximum input current [A] 8A

Rated output voltage [V] 12 V

Rated output current [A] 50 A

Rated output power [W] 600 W

Hot swapping Supported

Type of power cables C13

4.2.10 PAC600S12-EB (600W AC Power Module(Back to Front,

Power panel side exhaust))

Overview

Table 4-193 Basic information about the PAC600S12-EB

Item Details

Description 600W AC Power Module(Back to

Front, Power panel side exhaust)

Part Number 02312FFU-002

Model PAC600S12-EB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 394

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-157 Appearance of the PAC600S12-EB

Version Mapping

Table 4-194 Mappings between PAC600S12-EB and product models

Product Product Model First Supported Version

USG6650E USG6650E-AC V600R007C20SPC500

(02351YRY)

USG6650E USG6650E-AC V600R007C20SPC500

(02351YRY-001)

USG6650E USG6650E-AC V600R007C20SPC600

(02351YRY-002)

USG6585E USG6585E-AC V600R007C20SPC500

(02353ADA)

USG6525E USG6525E-AC V600R007C20SPC500

(02353AFX)

USG6635E USG6635E-AC V600R007C20SPC500

(02352RQD)

USG6625E USG6625E-AC V600R007C20SPC500

(02352RQN)

USG6615E USG6615E-AC V600R007C20SPC500

(02352RQL)

USG6630E USG6630E-AC V600R007C20SPC500

(02352FQA)

USG6630E USG6630E-AC V600R007C20SPC500

(02352FQA-001)

USG6630E USG6630E-AC V600R007C20SPC600

(02352FQA-002)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 395

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6565E USG6565E-AC V600R007C20SPC500

(02353AEJ)

USG6620E USG6620E-AC V600R007C20SPC500

(02352HMF)

USG6620E USG6620E-AC V600R007C20SPC500

(02352HMF-001)

USG6620E USG6620E-AC V600R007C20SPC600

(02352HMF-002)

USG6555E USG6555E-AC V600R007C20SPC500

(02353AEK)

USG6610E USG6610E-AC V600R007C20SPC500

(02352HMD)

USG6610E USG6610E-AC V600R007C20SPC500

(02352HMD-001)

USG6610E USG6610E-AC V600R007C20SPC600

(02352HMD-002)

USG6655E USG6655E-AC V600R007C20SPC500

(02352RPS)

Panel

Figure 4-158 Panel of the PAC600S12-EB

1. Power status indicator 2. Power receptacle 3. Clip hole

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 396

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-195 Indicators on the PAC600S12-EB

Silkscreen Name Color Status Description

STAT Power status Green Steady on The output of

indicator the AC power
module is
normal.

- Off ● The input

of the AC
power
module is
out of
range. For
example,
no AC
input, AC
input
overvoltag
e, or AC
input
undervolta
ge has
occurred.
● The output
of the AC
power
module is
out of
range. For
example,
undervolta
ge, or
overtempe
rature has
occurred.

Table 4-196 Ports on the PAC600S12-EB

Port Connector Type Description Available
Components

Power receptacle - Connects the C13 -

plug of the AC
power cable. For
details, see AC
Power Cables.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 397

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Port Connector Type Description Available

Components

Clip hole - The hole is used -

to install the
power cable clip,
which is used to
bind and fix the
power cable. The
power cable clip is
installed before
shipment.

Functions and Features

Table 4-197 Functions and features of the PAC600S12-EB

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overvoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Heat dissipation The heat dissipation is provided by the

fan of the power module.

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a
power module without interrupting
device operation.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 398

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-198 Technical specifications of the PAC600S12-EB

Item Specification

Dimensions without packaging (H x W 39.6 mm x 90 mm x 214.5 mm (1.56

x D) [mm(in.)] in. x 3.54 in. x 8.45 in.)

Weight without packaging [kg(lb)] 0.985 kg (2.17 lb)

Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz)

Input voltage range [V] 90 V AC to 290 V AC (47 Hz to 63 Hz)

Maximum input current [A] 8A

Rated output voltage [V] 12 V

Rated output current [A] 50 A

Rated output power [W] 600 W

Hot swapping Supported

Type of power cables C13

4.2.11 PAC60S12-AR (60W AC Power Module)

Overview

Table 4-199 Basic information about the PAC60S12-AR

Item Details

Description 60W AC Power Module

Part Number 02312SLE

Model PAC60S12-AR

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 399

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-159 Appearance of the PAC60S12-AR

Version Mapping

Table 4-200 Mappings between PAC60S12-AR and product models

Product Product Model First Supported Version

USG6585E USG6585E-AC V600R007C00

(02353ADA)

USG6585E USG6585E-AC V600R007C20SPC500

(02353ADA-001)

USG6585E USG6585E-AC V600R007C20SPC600

(02353ADA-002)

USG6525E USG6525E-AC V600R007C00

(02353AFX)

USG6525E USG6525E-AC V600R007C20SPC500

(02353AFX-001)

USG6525E USG6525E-AC V600R007C20SPC600

(02353AFX-002)

USG6565E USG6565E-AC V600R007C00

(02353AEJ)

USG6565E USG6565E-AC V600R007C20SPC500

(02353AEJ-001)

USG6565E USG6565E-AC V600R007C20SPC600

(02353AEJ-002)

USG6555E USG6555E-AC V600R007C00

(02353AEK)

USG6555E USG6555E-AC V600R007C20SPC500

(02353AEK-001)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 400

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6555E USG6555E-AC V600R007C20SPC600

(02353AEK-004)

Panel

Figure 4-160 Panel of the PAC60S12-AR

1. Power status indicator 2. Power receptacle 3. Clip hole

Table 4-201 Indicators on the PAC60S12-AR

Silkscreen Name Color Status Description

STAT Power status Green Steady on The output of

indicator the AC power
module is
normal.

Green Blinking The output

power is out
of range. For
example,
overvoltage,
overcurrent,
or short
circuit has
occurred.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 401

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off ● The input

of the AC
power
module is
out of
range. For
example,
no AC
input, AC
input
overvoltag
e, or AC
input
undervolta
ge has
occurred.
● The output
of the AC
power
module is
out of
range. For
example,
undervolta
ge, or
overtempe
rature has
occurred.

Table 4-202 Ports on the PAC60S12-AR

Port Connector Type Description Available

Components

Power receptacle - Connects the C13 -

plug of the AC
power cable. For
details, see AC
Power Cables.

Clip hole - The hole is used -

to install the
power cable clip,
which is used to
bind and fix the
power cable. The
power cable clip is
installed before
shipment.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 402

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features

Table 4-203 Functions and features of the PAC60S12-AR

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Heat dissipation Power module does not have fans. The

heat dissipation is provided by the fan
module of the device.

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a 170
W power module without interrupting
device operation.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 403

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-204 Technical specifications of the PAC60S12-AR

Item Specification

Dimensions without packaging (H x W 39.8 mm x 90 mm x 214.3 mm (1.57

x D) [mm(in.)] in. x 3.54 in. x 8.43 in.)

Weight without packaging [kg(lb)] 0.68 kg (1.5 lb)

Number of inputs 1

Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz)

Input voltage range [V] 90 V AC to 264 V AC (47 Hz to 63 Hz)

Maximum input current [A] 2A

Rated output voltage [V] 12 V

Rated output current [A] 5A

Rated output power [W] 60 W

Hot swapping Supported

Type of power cables C13

4.2.12 PAC60S12-R (60W AC Power Module)

Overview

Table 4-205 Basic information about the PAC60S12-R

Item Details

Description 60W AC Power Module

Part Number 02312DVA

Model PAC60S12-R

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 404

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-161 Appearance of the PAC60S12-R

Version Mapping

Table 4-206 Mappings between PAC60S12-R and product models

Product Product Model First Supported Version

USG6560E USG6560E-AC V600R006C00

(02352CBR)

USG6550E USG6550E-AC V600R006C00

(02352CBQ)

USG6585E USG6585E-AC V600R007C00

(02353ADA)

USG6580E USG6580E-AC V600R006C00

(02352CBS)

USG6525E USG6525E-AC V600R007C00

(02353AFX)

USG6515E USG6515E-AC V600R006C00

(02352CBP)

USG6565E USG6565E-AC V600R007C00

(02353AEJ)

USG6555E USG6555E-AC V600R007C00

(02353AEK)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 405

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Panel

Figure 4-162 Panel of the PAC60S12-R

1. Power status indicator 2. Power receptacle 3. Clip hole

Table 4-207 Indicators on the PAC60S12-R

Silkscreen Name Color Status Description

STAT Power status Green Steady on The output of

indicator the AC power
module is
normal.

Green Blinking The output

power is out
of range. For
example,
overvoltage,
overcurrent,
or short
circuit has
occurred.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 406

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off ● The input

of the AC
power
module is
out of
range. For
example,
no AC
input, AC
input
overvoltag
e, or AC
input
undervolta
ge has
occurred.
● The output
of the AC
power
module is
out of
range. For
example,
undervolta
ge, or
overtempe
rature has
occurred.

Table 4-208 Ports on the PAC60S12-R

Port Connector Type Description Available

Components

Power receptacle - Connects the C13 -

plug of the AC
power cable. For
details, see AC
Power Cables.

Clip hole - The hole is used -

to install the
power cable clip,
which is used to
bind and fix the
power cable. The
power cable clip is
installed before
shipment.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 407

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features

Table 4-209 Functions and features of the PAC60S12-R

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Heat dissipation Power module does not have fans. The

heat dissipation is provided by the fan
module of the device.

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a 170
W power module without interrupting
device operation.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 408

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-210 Technical specifications of the PAC60S12-R

Item Specification

Dimensions without packaging (H x W 39.8 mm x 90 mm x 214.3 mm (1.57

x D) [mm(in.)] in. x 3.54 in. x 8.43 in.)

Weight without packaging [kg(lb)] 0.65 kg (1.43 lb)

Number of inputs 1

Rated input voltage [V] 100 V AC to 240 V AC (50 Hz/60 Hz)

Input voltage range [V] 90 V AC to 264 V AC (47 Hz to 63 Hz)

Maximum input current [A] 2A

Rated output voltage [V] 12 V

Rated output current [A] 5A

Rated output power [W] 60 W

Hot swapping Supported

Type of power cables C13

4.2.13 PDC1000S12-CB (1000W DC Power Module(Back to

Front,Power panel side exhaust))

Overview

Table 4-211 Basic information about the PDC1000S12-CB

Item Details

Description 1000W DC Power Module(Back to

Front,Power panel side exhaust)

Part Number 02312JVG

Model PDC1000S12-CB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 409

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-163 Appearance of the PDC1000S12-CB

Version Mapping

Table 4-212 Mappings between PDC1000S12-CB and product models

Product Product Model First Supported Version

USG6635E USG6635E-DC V600R007C20

(02352RQE)

USG6630E USG6630E-DC V600R007C20SPC300

(02352CKV-001)

USG6630E USG6630E-DC V600R007C20SPC600

(02352CKV-002)

Panel

Figure 4-164 Panel of the PDC1000S12-CB

1. Power status indicator 2. Power receptacle

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 410

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-213 Indicators on the PDC1000S12-CB

Silkscreen Name Color Status Description

STAT Power status Green Steady on The output of

indicator the DC power
module is
normal.

Green Blinking The output

power is out
of range. For
example,
overvoltage,
overcurrent,
or short
circuit has
occurred.

- Off ● The input

of the DC
power
module is
out of
range. For
example,
no DC
input, DC
input
overvoltag
e, or DC
input
undervolta
ge has
occurred.
● The output
of the DC
power
module is
out of
range. For
example,
undervolta
ge, or
overtempe
rature has
occurred.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 411

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-214 Ports on the PDC1000S12-CB

Port Connector Type Description Available

Components

Power cable - Connect the black -

terminal wire to the RTN
(+) terminal and
the blue wire to
the NEG (-)
terminal. For
details, see DC
Power Cables.

Functions and Features

Table 4-215 Functions and features of the PDC1000S12-CB

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overvoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overcurrent protection Stops power output and does not

automatically restore power output
after the input current becomes
normal.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 412

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features Description

Heat dissipation The heat dissipation is provided by the

fan of the power module.

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a
power module without interrupting
device operation.

Technical Specifications

Table 4-216 Technical specifications of the PDC1000S12-CB

Item Specification

Dimensions without packaging (H x W 39.8 mm x 90 mm x 215 mm (1.57 in.

x D) [mm(in.)] x 3.54 in. x 8.46 in.)

Weight without packaging [kg(lb)] 1 kg (2.2 lb)

Number of inputs 1

Rated input voltage [V] -48V DC to -60V DC

Input voltage range [V] -38.4V DC to -72V DC

Maximum input current [A] 30 A

Rated output voltage [V] 12 V

Rated output power [W] 1000 W

Hot swapping Supported

4.2.14 PDC350S12-B (350W DC Power Module)

Overview

Table 4-217 Basic information about the PDC350S12-B

Item Details

Description 350W DC Power Module

Part Number 02312DVB

Model PDC350S12-B

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 413

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-165 Appearance of the PDC350S12-B

Version Mapping

Table 4-218 Mappings between PDC350S12-B and product models

Product Product Model First Supported Version

USG6630E USG6630E-DC V600R006C00

(02352CKV)

Panel

Figure 4-166 Panel of the PDC350S12-B

1. Power status indicator 2. Power receptacle

Table 4-219 Indicators on the PDC350S12-B

Silkscreen Name Color Status Description

STAT Power status Green Steady on The output of

indicator the DC power
module is
normal.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 414

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off ● The input

of the DC
power
module is
out of
range. For
example,
no DC
input, DC
input
overvoltag
e, or DC
input
undervolta
ge has
occurred.
● The output
of the DC
power
module is
out of
range. For
example,
undervolta
ge, or
overtempe
rature has
occurred.

Table 4-220 Ports on the PDC350S12-B

Port Connector Type Description Available
Components

Power cable - Connect the black -

terminal wire to the RTN
(+) terminal and
the blue wire to
the NEG (-)
terminal. For
details, see DC
Power Cables.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 415

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features

Table 4-221 Functions and features of the PDC350S12-B

Functions and Features Description

Input undervoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overvoltage protection Stops power output and automatically

restores power output after the input
voltage becomes normal.

Input overcurrent protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output current limiting protection Intermittently provides output and

automatically restores normal output
after the output current falls within a
normal range.

Output overvoltage protection Intermittently stops output and

automatically restores output after the
overvoltage condition is removed.

Output short circuit protection Intermittently provides output and

automatically restores normal output
after the output short circuit is
removed.

Overtemperature protection When the temperature of the power

module reaches a preset threshold, the
power module stops power output and
will automatically restore power
output after the temperature drops
back to the normal range.

Hot swap The device has 1+1 power module

redundancy. You can hot-swap a
power module without interrupting
device operation.

Technical Specifications

Table 4-222 Technical specifications of the PDC350S12-B

Item Specification

Dimensions without packaging (H x W 39.8 mm x 90 mm x 215 mm (1.57 in.

x D) [mm(in.)] x 3.54 in. x 8.46 in.)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 416

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Weight without packaging [kg(lb)] 0.689 kg (1.52 lb)

Number of inputs 1

Rated input voltage [V] -48V DC to -60V DC

Input voltage range [V] -38.4V DC to -72V DC

Maximum input current [A] 11 A

Rated output voltage [V] 12 V

Rated output power [W] 350 W

Hot swapping Supported

4.3 Fan Modules

This chapter describes hardware information for all fan modules of the USG6000E,
including hardware appearance, and technical specifications.

4.3.1 FAN-023A-B (Fan Box,FAN-023A-B,Fan Box,Fan

box(B,FAN panel side exhaust))

Overview

Table 4-223 Basic information about the FAN-023A-B

Item Details

Description Fan Box,FAN-023A-B,Fan Box,Fan

box(B,FAN panel side exhaust)

Part Number 02312DKW

Model FAN-023A-B

Appearance

Figure 4-167 Appearance of the FAN-023A-B

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 417

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Version Mapping

Table 4-224 Mappings between FAN-023A-B and product models

Product Product Model First Supported Version

USG6560E USG6560E-AC V600R006C00

(02352CBR)

USG6550E USG6550E-AC V600R006C00

(02352CBQ)

USG6580E USG6580E-AC V600R006C00

(02352CBS)

USG6575E-B USG6575E-B-AC V600R007C20

(02353LKD)

USG6575E-B USG6575E-B-AC V600R007C20SPC600

(02353LKD-002)

USG6525E USG6525E-AC V600R007C00

(02353AFX)

USG6525E USG6525E-AC V600R007C20SPC500

(02353AFX-001)

USG6525E USG6525E-AC V600R007C20SPC600

(02353AFX-002)

USG6515E USG6515E-AC V600R006C00

(02352CBP)

USG6630E USG6630E-AC V600R006C00

(02352FQA)

USG6630E USG6630E-DC V600R006C00

(02352CKV)

USG6630E USG6630E-AC V600R007C20SPC300

(02352FQA-001)

USG6630E USG6630E-DC V600R007C20SPC300

(02352CKV-001)

USG6630E USG6630E-AC V600R007C20SPC600

(02352FQA-002)

USG6630E USG6630E-DC V600R007C20SPC600

(02352CKV-002)

USG6565E USG6565E-AC V600R007C00

(02353AEJ)

USG6565E USG6565E-AC V600R007C20SPC500

(02353AEJ-001)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 418

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6565E USG6565E-AC V600R007C20SPC600

(02353AEJ-002)

USG6620E USG6620E-AC V600R007C20SPC100

(02352HMF)

USG6620E USG6620E-AC V600R007C20SPC300

(02352HMF-001)

USG6620E USG6620E-AC V600R007C20SPC600

(02352HMF-002)

USG6555E USG6555E-AC V600R007C00

(02353AEK)

USG6555E USG6555E-AC V600R007C20SPC500

(02353AEK-001)

USG6555E USG6555E-AC V600R007C20SPC600

(02353AEK-004)

USG6610E USG6610E-AC V600R007C20SPC100

(02352HMD)

USG6610E USG6610E-AC V600R007C20SPC300

(02352HMD-001)

USG6610E USG6610E-AC V600R007C20SPC600

(02352HMD-002)

USG6650E USG6650E-AC V600R006C00

(02351YRY)

USG6650E USG6650E-AC V600R007C20SPC300

(02351YRY-001)

USG6650E USG6650E-AC V600R007C20SPC600

(02351YRY-002)

USG6585E USG6585E-AC V600R007C00

(02353ADA)

USG6585E USG6585E-AC V600R007C20SPC500

(02353ADA-001)

USG6585E USG6585E-AC V600R007C20SPC600

(02353ADA-002)

USG6605E-B USG6605E-B-AC V600R007C20

(02353PSK)

USG6605E-B USG6605E-B-AC V600R007C20SPC600

(02353PSK-001)

USG6635E USG6635E-DC V600R007C20

(02352RQE)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 419

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6635E USG6635E-AC V600R007C00

(02352RQD)

USG6625E USG6625E-AC V600R007C00

(02352RQN)

USG6615E USG6615E-AC V600R007C00

(02352RQL)

USG6655E USG6655E-AC V600R007C00

(02352RPS)

Panel

Figure 4-168 Panel of the FAN-023A-B

1. FAN indicator

Table 4-225 Indicators on the FAN-023A-B

Silkscreen Name Color Status Description

- FAN indicator Green Blink every The fan

two seconds module is
(0.5 Hz) running
normally.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 420

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Steady on The fan

module is
faulty. For
example, the
fans stop
running or
are blocked,
the power
supply of the
fan is
abnormal, the
rotation
speed of the
fan does not
match, or the
fan module is
not in
position. For
details, see
SRM_ENTITY_
1.3.6.1.4.1.201
1.5.25.219.2.6.
1
hwFanRemov
e_137216,
SRM_ENTITY_
1.3.6.1.4.1.201
1.5.25.219.2.6.
5
hwFanInvalid_
139264,
SRM_ENTITY_
1.3.6.1.4.1.201
1.5.25.219.2.6.
5
hwFanInvalid_
139267.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 421

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Blink every The fan

two seconds module
(0.5 Hz) generates an
alarm, for
example,
indicating the
air extraction
and blowing
mode is
incorrect. s,
see
SRM_ENTITY_
1.3.6.1.4.1.201
1.5.25.219.2.6.
5
hwFanInvalid_
139265.

- Off The fan

module is not
installed.

Functions and Features

Table 4-226 Functions and features of the FAN-023A-B

Functions and Features Description

Basic function The fan module supports hot

swapping. It consists of the fan
module frame, fan, and light pipe.

Technical Specifications

Table 4-227 Technical specifications of the FAN-023A-B

Item Specification

Dimensions without packaging (H x W 40 mm x 40 mm x 100.3 mm (1.57 in.

x D) [mm(in.)] x 1.57 in. x 3.95 in.)

Weight without packaging [kg(lb)] 0.1 kg (0.22 lb)

Number of fans 1

Typical power consumption [W] 7.2 W

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 422

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Maximum power consumption (40°C) 8.64 W

[W]

Operating voltage range [V] 7 V DC to 15 V DC

Maximum airflow [CFM] 25.29 CFM

Maximum noise level [dB(A)] 59 dB(A)

Maximum wind pressure [Pa] 531.94 Pa

4.3.2 FAN-036A-B (FAN-036A-B,Fan Box,Fan box(B,FAN panel

side exhaust))

Overview

Table 4-228 Basic information about the FAN-036A-B

Item Details

Description FAN-036A-B,Fan Box,Fan box(B,FAN

panel side exhaust)

Part Number 02312EYW

Model FAN-036A-B

Appearance

Figure 4-169 Appearance of the FAN-036A-B

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 423

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Version Mapping

Table 4-229 Mappings between FAN-036A-B and product models

Product Product Model First Supported Version

USG6716E USG6716E-AC V600R006C00

(02351YRS)

USG6716E USG6716E-AC V600R007C20SPC600

(02351YRS-001)

USG6680E USG6680E-AC V600R006C00

(02351YRR)

USG6680E USG6680E-AC V600R007C20SPC600

(02351YRR-001)

USG6712E USG6712E-AC V600R006C00

(02352CNL)

USG6712E USG6712E-AC V600R007C20SPC600

(02352CNL-001)

Panel

Figure 4-170 Panel of the FAN-036A-B

1. FAN indicator

Table 4-230 Indicators on the FAN-036A-B

Silkscreen Name Color Status Description

- FAN indicator Green Blink every The fan

two seconds module is
(0.5 Hz) running
normally.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 424

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Steady on The fan

module is
faulty. For
example, the
fans stop
running or
are blocked,
the power
supply of the
fan is
abnormal, the
rotation
speed of the
fan does not
match, or the
fan module is
not in
position. For
details, see
SRM_ENTITY_
1.3.6.1.4.1.201
1.5.25.219.2.6.
1
hwFanRemov
e_137216,
SRM_ENTITY_
1.3.6.1.4.1.201
1.5.25.219.2.6.
5
hwFanInvalid_
139264,
SRM_ENTITY_
1.3.6.1.4.1.201
1.5.25.219.2.6.
5
hwFanInvalid_
139267.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 425

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Red Blink every The fan

two seconds module
(0.5 Hz) generates an
alarm, for
example,
indicating the
air extraction
and blowing
mode is
incorrect. s,
see
SRM_ENTITY_
1.3.6.1.4.1.201
1.5.25.219.2.6.
5
hwFanInvalid_
139265.

- Off The fan

module is not
installed.

Functions and Features

Table 4-231 Functions and features of the FAN-036A-B

Functions and Features Description

Basic function The fan module supports hot

swapping. It consists of the fan
module frame, fan, and light pipe.

Technical Specifications

Table 4-232 Technical specifications of the FAN-036A-B

Item Specification

Dimensions without packaging (H x W 40 mm x 40 mm x 128.3 mm (1.57 in.

x D) [mm(in.)] x 1.57 in. x 5.05 in.)

Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)

Number of fans 1

Typical power consumption [W] 28 W

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 426

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Maximum power consumption (40°C) 33.6 W

[W]

Operating voltage range [V] 10.8 V DC to 13.2 V DC

Maximum airflow [CFM] 36 CFM

Maximum noise level [dB(A)] 69.8 dB(A)

Maximum wind pressure [Pa] 950 Pa

4.4 Storage Devices

This chapter describes hardware information for hard disk modules of the
USG6000E, including hardware appearance, functions, and technical specifications.

4.4.1 Hard Disk

4.4.1.1 HDD-SATA1000G-A (HardDisk-1000GB-SATA-7200rpm-2.5"-64M-hot-

swap-built-in-Front Panel-Silver)

Overview

Table 4-233 Basic information about the HDD-SATA1000G-A

Item Details

Description HardDisk-1000GB-
SATA-7200rpm-2.5"-64M-hot-swap-
built-in-Front Panel-Silver

Part Number 02312DLF

Model HDD-SATA1000G-A

Silkscreen SATA
1000GB 7.2K
02312DLF

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 427

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance

Figure 4-171 Appearance of the HDD-SATA1000G-A

Version Mapping

Table 4-234 Mappings between HDD-SATA1000G-A and product models

Product Product Model First Supported Version

USG6575E-B USG6575E-B-AC V600R007C20

(02353LKD)

USG6575E-B USG6575E-B-AC V600R007C20SPC600

(02353LKD-002)

USG6630E USG6630E-AC V600R006C00

(02352FQA)

USG6630E USG6630E-DC V600R006C00

(02352CKV)

USG6630E USG6630E-AC V600R007C20SPC300

(02352FQA-001)

USG6630E USG6630E-DC V600R007C20SPC300

(02352CKV-001)

USG6630E USG6630E-AC V600R007C20SPC600

(02352FQA-002)

USG6630E USG6630E-DC V600R007C20SPC600

(02352CKV-002)

USG6620E USG6620E-AC V600R007C20SPC100

(02352HMF)

USG6620E USG6620E-AC V600R007C20SPC300

(02352HMF-001)

USG6620E USG6620E-AC V600R007C20SPC600

(02352HMF-002)

USG6610E USG6610E-AC V600R007C20SPC100

(02352HMD)

USG6610E USG6610E-AC V600R007C20SPC300

(02352HMD-001)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 428

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6610E USG6610E-AC V600R007C20SPC600

(02352HMD-002)

USG6650E USG6650E-AC V600R006C00

(02351YRY)

USG6650E USG6650E-AC V600R007C20SPC300

(02351YRY-001)

USG6650E USG6650E-AC V600R007C20SPC600

(02351YRY-002)

USG6680E USG6680E-AC V600R006C00

(02351YRR)

USG6680E USG6680E-AC V600R007C20SPC600

(02351YRR-001)

USG6605E-B USG6605E-B-AC V600R007C20

(02353PSK)

USG6605E-B USG6605E-B-AC V600R007C20SPC600

(02353PSK-001)

USG6716E USG6716E-AC V600R006C00

(02351YRS)

USG6716E USG6716E V600R007C20SPC600

(02351YRS-001)

USG6635E USG6635E-DC V600R007C20

(02352RQE)

USG6635E USG6635E-AC V600R007C00

(02352RQD)

USG6712E USG6712E-AC V600R006C00

(02352CNL)

USG6712E USG6712E V600R007C20SPC600

(02352CNL-001)

USG6625E USG6625E-AC V600R007C00

(02352RQN)

USG6615E USG6615E-AC V600R007C00

(02352RQL)

USG6655E USG6655E-AC V600R007C00

(02352RPS)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 429

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Panel

Figure 4-172 Panel of the HDD-SATA1000G-A

1. ALM indicator 2. RUN indicator

Table 4-235 Indicators on the HDD-SATA1000G-A

Silkscreen Name Color Status Description

- ALM indicator Orange Steady on The hard disk

fails.

- Off The hard disk

is running
properly.
The hard disk
fails.

- RUN indicator Green Steady on The hard disk

is running.
The hard disk
is running
properly.
The hard disk
fails.

Green Blinking Data is being

read from or
written to the
hard disk.
The hard disk
is running.
The hard disk
is running
properly.
The hard disk
fails.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 430

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- Off The hard disk

is not
detected or
the power
cable is
disconnected.

Functions and Features

Table 4-236 Functions and features of the HDD-SATA1000G-A

Functions and Features Description

Basic functions Storage log.

Hot swap Hot swap is supported, but hard disks

cannot be directly swapped or
removed. Run the disk offline
command. Remove the hard disk
about 30 seconds after the system
displays a message indicating that the
hard disk stops working. Alternatively,
press and hold the OFL button for
about 4 seconds until the OFL
indicator is on, and then remove the
hard disk unit. Otherwise, the hard
disk may be damaged, data may be
lost, and the system may crash.

Restrictions and limitations Do not low-level format the hard disk.

Otherwise, the hard disk cannot be
used.

Technical Specifications

Table 4-237 Technical specifications of the HDD-SATA1000G-A

Item Specification

Form factor 2.5 inch

Dimensions without packaging (H x W 15 mm x 75 mm x 130 mm (0.59 in. x

x D) [mm(in.)] 2.95 in. x 5.12 in.)

Weight without packaging [kg(lb)] 0.135 kg (0.3 lb)

Storage capacity [GB] 1000

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 431

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Port type SATA

Maximum power consumption [W] 16.72 W

Maximum heat dissipation [BTU/hour] 57.03 BTU/hour

4.4.1.2 M.2-SATA240G-A (M.2 SSD,SATA 6Gb/s-240GB,Hot-Swappable)

Overview

Table 4-238 Basic information about the M.2-SATA240G-A

Item Details

Description M.2 SSD,SATA 6Gb/s-240GB,Hot-

Swappable

Part Number 02312DLK

Model M.2-SATA240G-A

Appearance

Figure 4-173 Appearance of the M.2-SATA240G-A

Version Mapping

Table 4-239 Mappings between M.2-SATA240G-A and product models

Product Product Model First Supported Version

USG6560E USG6560E-AC V600R006C00

(02352CBR)

USG6550E USG6550E-AC V600R006C00

(02352CBQ)

USG6585E USG6585E-AC V600R007C00

(02353ADA)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 432

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6585E USG6585E-AC V600R007C20SPC500

(02353ADA-001)

USG6585E USG6585E-AC V600R007C20SPC600

(02353ADA-002)

USG6580E USG6580E-AC V600R006C00

(02352CBS)

USG6525E USG6525E-AC V600R007C00

(02353AFX)

USG6525E USG6525E-AC V600R007C20SPC500

(02353AFX-001)

USG6525E USG6525E-AC V600R007C20SPC600

(02353AFX-002)

USG6515E USG6515E-AC V600R006C00

(02352CBP)

USG6565E USG6565E-AC V600R007C00

(02353AEJ)

USG6565E USG6565E-AC V600R007C20SPC500

(02353AEJ-001)

USG6565E USG6565E-AC V600R007C20SPC600

(02353AEJ-002)

USG6555E USG6555E-AC V600R007C00

(02353AEK)

USG6555E USG6555E-AC V600R007C20SPC500

(02353AEK-001)

USG6555E USG6555E-AC V600R007C20SPC600

(02353AEK-004)

Panel

Figure 4-174 Panel of the M.2-SATA240G-A

1. ALM indicator 2. RUN indicator

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 433

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-240 Indicators on the M.2-SATA240G-A

Silkscreen Name Color Status Description

- ALM indicator Orange Steady on The hard disk

fails.

- Off The hard disk

is running
properly.
The hard disk
fails.

- RUN indicator Green Steady on The hard disk

is running.
The hard disk
is running
properly.
The hard disk
fails.

Green Blinking Data is being

read from or
written to the
hard disk.
The hard disk
is running.
The hard disk
is running
properly.
The hard disk
fails.

- Off The hard disk

is not
detected or
the power
cable is
disconnected.

Functions and Features

Table 4-241 Functions and features of the M.2-SATA240G-A

Functions and Features Description

Basic functions Storage log.

Hot swap Supports hot swap.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 434

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features Description

Restrictions and limitations Do not low-level format the hard disk.

Otherwise, the hard disk cannot be
used.

Technical Specifications

Table 4-242 Technical specifications of the M.2-SATA240G-A

Item Specification

Form factor M.2

Dimensions without packaging (H x W 10 mm x 25 mm x 110 mm (0.39 in. x

x D) [mm(in.)] 0.98 in. x 4.33 in.)

Weight without packaging [kg(lb)] 0.1 kg (0.22 lb)

Storage capacity [GB] 240

Port type SATA

Maximum power consumption [W] 5W

Maximum heat dissipation [BTU/hour] 5 BTU/hour

4.4.1.3 M.2-SATA64G-A (M.2 SSD,SATA 6Gb/s-64GB,Hot-Swappable)

Overview

Table 4-243 Basic information about the M.2-SATA64G-A

Item Details

Description M.2 SSD,SATA 6Gb/s-64GB,Hot-

Swappable

Part Number 02312DLJ

Model M.2-SATA64G-A

Appearance

Figure 4-175 Appearance of the M.2-SATA64G-A

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 435

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Version Mapping

Table 4-244 Mappings between M.2-SATA64G-A and product models

Product Product Model First Supported Version

USG6525E USG6525E-AC V600R007C00

(02353AFX)

USG6525E USG6525E-AC V600R007C20SPC500

(02353AFX-001)

USG6525E USG6525E-AC V600R007C20SPC600

(02353AFX-002)

USG6515E USG6515E-AC V600R006C00

(02352CBP)

Panel

Figure 4-176 Panel of the M.2-SATA64G-A

1. ALM indicator 2. RUN indicator

Table 4-245 Indicators on the M.2-SATA64G-A

Silkscreen Name Color Status Description

- ALM indicator Orange Steady on The hard disk

fails.

- Off The hard disk

is running
properly.
The hard disk
fails.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 436

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

- RUN indicator Green Steady on The hard disk

is running.
The hard disk
is running
properly.
The hard disk
fails.

Green Blinking Data is being

read from or
written to the
hard disk.
The hard disk
is running.
The hard disk
is running
properly.
The hard disk
fails.

- Off The hard disk

is not
detected or
the power
cable is
disconnected.

Functions and Features

Table 4-246 Functions and features of the M.2-SATA64G-A

Functions and Features Description

Basic functions Storage log.

Hot swap Supports hot swap.

Restrictions and limitations Do not low-level format the hard disk.

Otherwise, the hard disk cannot be
used.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 437

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-247 Technical specifications of the M.2-SATA64G-A

Item Specification

Form factor M.2

Dimensions without packaging (H x W 10 mm x 25 mm x 110 mm (0.39 in. x

x D) [mm(in.)] 0.98 in. x 4.33 in.)

Weight without packaging [kg(lb)] 0.1 kg (0.22 lb)

Storage capacity [GB] 64

Port type SATA

Maximum power consumption [W] 2.7 W

Maximum heat dissipation [BTU/hour] 2.7 BTU/hour

4.4.1.4 SSD-Sata240G-A (SSD,240GB,SATA 6Gb/s,Read Intensive,2.5inch)

Overview

Table 4-248 Basic information about the SSD-Sata240G-A

Item Details

Description SSD,240GB,SATA 6Gb/s,Read Intensive,

2.5inch

Part Number 02312DLH

Model SSD-Sata240G-A

Silkscreen SATA
240GB SSD
02312DLH

Appearance

Figure 4-177 Appearance of the SSD-Sata240G-A

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 438

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Version Mapping

Table 4-249 Mappings between SSD-Sata240G-A and product models

Product Product Model First Supported Version

USG6575E-B USG6575E-B-AC V600R007C20

(02353LKD)

USG6575E-B USG6575E-B-AC V600R007C20SPC600

(02353LKD-002)

USG6630E USG6630E-AC V600R006C00

(02352FQA)

USG6630E USG6630E-DC V600R006C00

(02352CKV)

USG6630E USG6630E-AC V600R007C20SPC300

(02352FQA-001)

USG6630E USG6630E-DC V600R007C20SPC300

(02352CKV-001)

USG6630E USG6630E-AC V600R007C20SPC600

(02352FQA-002)

USG6630E USG6630E-DC V600R007C20SPC600

(02352CKV-002)

USG6620E USG6620E-AC V600R007C20SPC100

(02352HMF)

USG6620E USG6620E-AC V600R007C20SPC300

(02352HMF-001)

USG6620E USG6620E-AC V600R007C20SPC600

(02352HMF-002)

USG6610E USG6610E-AC V600R007C20SPC100

(02352HMD)

USG6610E USG6610E-AC V600R007C20SPC300

(02352HMD-001)

USG6610E USG6610E-AC V600R007C20SPC600

(02352HMD-002)

USG6650E USG6650E-AC V600R006C00

(02351YRY)

USG6650E USG6650E-AC V600R007C20SPC300

(02351YRY-001)

USG6650E USG6650E-AC V600R007C20SPC600

(02351YRY-002)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 439

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6680E USG6680E-AC V600R006C00

(02351YRR)

USG6680E USG6680E-AC V600R007C20SPC600

(02351YRR-001)

USG6605E-B USG6605E-B-AC V600R007C20

(02353PSK)

USG6605E-B USG6605E-B-AC V600R007C20SPC600

(02353PSK-001)

USG6716E USG6716E-AC V600R006C00

(02351YRS)

USG6716E USG6716E V600R007C20SPC600

(02351YRS-001)

USG6635E USG6635E-DC V600R007C20

(02352RQE)

USG6635E USG6635E-AC V600R007C00

(02352RQD)

USG6712E USG6712E-AC V600R006C00

(02352CNL)

USG6712E USG6712E V600R007C20SPC600

(02352CNL-001)

USG6625E USG6625E-AC V600R007C00

(02352RQN)

USG6615E USG6615E-AC V600R007C00

(02352RQL)

USG6655E USG6655E-AC V600R007C00

(02352RPS)

Panel

Figure 4-178 Panel of the SSD-Sata240G-A

1. ALM indicator 2. RUN indicator

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 440

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-250 Indicators on the SSD-Sata240G-A

Silkscreen Name Color Status Description

- ALM indicator Orange Steady on The hard disk

fails.

- Off The hard disk

is running
properly.
The hard disk
fails.

- RUN indicator Green Steady on The hard disk

is running.
The hard disk
is running
properly.
The hard disk
fails.

Green Blinking Data is being

read from or
written to the
hard disk.
The hard disk
is running.
The hard disk
is running
properly.
The hard disk
fails.

- Off The hard disk

is not
detected or
the power
cable is
disconnected.

Functions and Features

Table 4-251 Functions and features of the SSD-Sata240G-A

Functions and Features Description

Basic functions Storage log.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 441

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features Description

Hot swap Hot swap is supported, but hard disks

cannot be directly swapped or
removed. Run the disk offline
command. Remove the hard disk
about 30 seconds after the system
displays a message indicating that the
hard disk stops working. Alternatively,
press and hold the OFL button for
about 4 seconds until the OFL
indicator is on, and then remove the
hard disk unit. Otherwise, the hard
disk may be damaged, data may be
lost, and the system may crash.

Restrictions and limitations Do not low-level format the hard disk.

Otherwise, the hard disk cannot be
used.

Technical Specifications

Table 4-252 Technical specifications of the SSD-Sata240G-A

Item Specification

Form factor 2.5 inch

Dimensions without packaging (H x W 15 mm x 75 mm x 130 mm (0.59 in. x

x D) [mm(in.)] 2.95 in. x 5.12 in.)

Weight without packaging [kg(lb)] 0.135 kg (0.3 lb)

Storage capacity [GB] 240

Port type SATA

Maximum power consumption [W] 4.36 W

Maximum heat dissipation [BTU/hour] 14.86 BTU/hour

4.4.1.5 SSD-SATA960G-B (SSD 960GB,SATA 6Gb/s,Read Intensive,2.5inch)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 442

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Overview

Table 4-253 Basic information about the SSD-SATA960G-B

Item Details

Description SSD 960GB,SATA 6Gb/s,Read Intensive,

2.5inch

Part Number 02312YNW

Model SSD-SATA960G-B

Silkscreen SATA
960GB SSD
02312YNW

Appearance

Figure 4-179 Appearance of the SSD-SATA960G-B

Version Mapping

Table 4-254 Mappings between SSD-SATA960G-B and product models

Product Product Model First Supported Version

USG6575E-B USG6575E-B-AC V600R007C20

(02353LKD)

USG6575E-B USG6575E-B-AC V600R007C20SPC600

(02353LKD-002)

USG6630E USG6630E-AC V600R007C20

(02352FQA)

USG6630E USG6630E-DC V600R007C20

(02352CKV)

USG6630E USG6630E-AC V600R007C20SPC300

(02352FQA-001)

USG6630E USG6630E-DC V600R007C20SPC300

(02352CKV-001)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 443

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6630E USG6630E-AC V600R007C20SPC600

(02352FQA-002)

USG6630E USG6630E-DC V600R007C20SPC600

(02352CKV-002)

USG6620E USG6620E-AC V600R007C20SPC100

(02352HMF)

USG6620E USG6620E-AC V600R007C20SPC300

(02352HMF-001)

USG6620E USG6620E-AC V600R007C20SPC600

(02352HMF-002)

USG6610E USG6610E-AC V600R007C20SPC100

(02352HMD)

USG6610E USG6610E-AC V600R007C20SPC300

(02352HMD-001)

USG6610E USG6610E-AC V600R007C20SPC600

(02352HMD-002)

USG6650E USG6650E-AC V600R007C20

(02351YRY)

USG6650E USG6650E-AC V600R007C20SPC300

(02351YRY-001)

USG6650E USG6650E-AC V600R007C20SPC600

(02351YRY-002)

USG6680E USG6680E-AC V600R007C20

(02351YRR)

USG6680E USG6680E-AC V600R007C20SPC600

(02351YRR-001)

USG6605E-B USG6605E-B-AC V600R007C20

(02353PSK)

USG6605E-B USG6605E-B-AC V600R007C20SPC600

(02353PSK-001)

USG6716E USG6716E-AC V600R007C20

(02351YRS)

USG6716E USG6716E V600R007C20SPC600

(02351YRS-001)

USG6635E USG6635E-DC V600R007C20

(02352RQE)

USG6635E USG6635E-AC V600R007C20

(02352RQD)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 444

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6712E USG6712E-AC V600R007C20

(02352CNL)

USG6712E USG6712E V600R007C20SPC600

(02352CNL-001)

USG6625E USG6625E-AC V600R007C20

(02352RQN)

USG6615E USG6615E-AC V600R007C20

(02352RQL)

USG6655E USG6655E-AC V600R007C20

(02352RPS)

Panel

Figure 4-180 Panel of the SSD-SATA960G-B

1. ALM indicator 2. RUN indicator

Table 4-255 Indicators on the SSD-SATA960G-B

Silkscreen Name Color Status Description

- ALM indicator Orange Steady on The hard disk

fails.

- Off The hard disk

is running
properly.
The hard disk
fails.

- RUN indicator Green Steady on The hard disk

is running.
The hard disk
is running
properly.
The hard disk
fails.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 445

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking Data is being

read from or
written to the
hard disk.
The hard disk
is running.
The hard disk
is running
properly.
The hard disk
fails.

- Off The hard disk

is not
detected or
the power
cable is
disconnected.

Functions and Features

Table 4-256 Functions and features of the SSD-SATA960G-B

Functions and Features Description

Basic functions Storage log.

Hot swap Hot swap is supported, but hard disks

cannot be directly swapped or
removed. Run the disk offline
command. Remove the hard disk
about 30 seconds after the system
displays a message indicating that the
hard disk stops working. Alternatively,
press and hold the OFL button for
about 4 seconds until the OFL
indicator is on, and then remove the
hard disk unit. Otherwise, the hard
disk may be damaged, data may be
lost, and the system may crash.

Restrictions and limitations Do not low-level format the hard disk.

Otherwise, the hard disk cannot be
used.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 446

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-257 Technical specifications of the SSD-SATA960G-B

Item Specification

Form factor 2.5 inch

Dimensions without packaging (H x W 15 mm x 75 mm x 130 mm (0.59 in. x

x D) [mm(in.)] 2.95 in. x 5.12 in.)

Weight without packaging [kg(lb)] 0.135 kg (0.3 lb)

Storage capacity [GB] 960

Port type SATA

Maximum power consumption [W] 5.23 W

Maximum heat dissipation [BTU/hour] 17.85 BTU/hour

4.4.1.6 SSD-SATA240G-C (SSD-SATA240G-C-Solid State Drives,2.5inch)

Overview

Table 4-258 Basic information about the SSD-SATA240G-C

Item Details

Description SSD-SATA240G-C-Solid State Drives,

2.5inch

Part Number 02313XED

Model SSD-SATA240G-C

Silkscreen M.2

Appearance

Figure 4-181 Appearance of the SSD-SATA240G-C

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 447

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Version Mapping

Table 4-259 Mappings between SSD-SATA240G-C and product models

Product Product Model First Supported Version

USG6575E-B USG6575E-B-AC V600R007C20SPC600

(02353LKD)

USG6575E-B USG6575E-B-AC V600R007C20SPC600

(02353LKD-002)

USG6630E USG6630E-AC V600R007C20SPC600

(02352FQA)

USG6630E USG6630E-DC V600R007C20SPC600

(02352CKV)

USG6630E USG6630E-AC V600R007C20SPC600

(02352FQA-001)

USG6630E USG6630E-DC V600R007C20SPC600

(02352CKV-001)

USG6630E USG6630E-AC V600R007C20SPC600

(02352FQA-002)

USG6630E USG6630E-DC V600R007C20SPC600

(02352CKV-002)

USG6620E USG6620E-AC V600R007C20SPC600

(02352HMF)

USG6620E USG6620E-AC V600R007C20SPC600

(02352HMF-001)

USG6620E USG6620E-AC V600R007C20SPC600

(02352HMF-002)

USG6610E USG6610E-AC V600R007C20SPC600

(02352HMD)

USG6610E USG6610E-AC V600R007C20SPC600

(02352HMD-001)

USG6610E USG6610E-AC V600R007C20SPC600

(02352HMD-002)

USG6650E USG6650E-AC V600R007C20SPC600

(02351YRY)

USG6650E USG6650E-AC V600R007C20SPC600

(02351YRY-001)

USG6650E USG6650E-AC V600R007C20SPC600

(02351YRY-002)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 448

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6680E USG6680E-AC V600R007C20SPC600

(02351YRR)

USG6680E USG6680E-AC V600R007C20SPC600

(02351YRR-001)

USG6605E-B USG6605E-B-AC V600R007C20SPC600

(02353PSK)

USG6605E-B USG6605E-B-AC V600R007C20SPC600

(02353PSK-001)

USG6716E USG6716E-AC V600R007C20SPC600

(02351YRS)

USG6716E USG6716E V600R007C20SPC600

(02351YRS-001)

USG6635E USG6635E-DC V600R007C20SPC600

(02352RQE)

USG6635E USG6635E-AC V600R007C20SPC600

(02352RQD)

USG6712E USG6712E-AC V600R007C20SPC600

(02352CNL)

USG6712E USG6712E V600R007C20SPC600

(02352CNL-001)

USG6625E USG6625E-AC V600R007C20SPC600

(02352RQN)

USG6615E USG6615E-AC V600R007C20SPC600

(02352RQL)

USG6655E USG6655E-AC V600R007C20SPC600

(02352RPS)

Panel

Figure 4-182 Panel of the SSD-SATA240G-C

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 449

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

1. ALM indicator 2. RUN indicator 3. Filler panel of the M.2

hard disk slot
NOTE
The hard disk slot function
is reserved and is not
enabled.

Table 4-260 Indicators on the SSD-SATA240G-C

Silkscreen Name Color Status Description

- ALM indicator Orange Steady on The hard disk

fails.

- Off The hard disk

is running
properly.
The hard disk
fails.

- RUN indicator Green Steady on The hard disk

is running.
The hard disk
is running
properly.
The hard disk
fails.

Green Blinking Data is being

read from or
written to the
hard disk.
The hard disk
is running.
The hard disk
is running
properly.
The hard disk
fails.

- Off The hard disk

is not
detected or
the power
cable is
disconnected.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 450

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Functions and Features

Table 4-261 Functions and features of the SSD-SATA240G-C

Functions and Features Description

Basic functions Storage log.

Hot swap Hot swap is supported, but hard disks

cannot be directly swapped or
removed. Run the disk offline
command. Remove the hard disk
about 30 seconds after the system
displays a message indicating that the
hard disk stops working. Alternatively,
press and hold the OFL button for
about 4 seconds until the OFL
indicator is on, and then remove the
hard disk unit. Otherwise, the hard
disk may be damaged, data may be
lost, and the system may crash.

Restrictions and limitations Do not low-level format the hard disk.

Otherwise, the hard disk cannot be
used.

Technical Specifications

Table 4-262 Technical specifications of the SSD-SATA240G-C

Item Specification

Form factor 2.5 inch

Dimensions without packaging (H x W 15 mm x 75 mm x 130 mm (0.59 in. x

x D) [mm(in.)] 2.95 in. x 5.12 in.)

Weight without packaging [kg(lb)] 0.135 kg (0.3 lb)

Storage capacity [GB] 240

Port type SATA

Maximum power consumption [W] 5.23 W

Maximum heat dissipation [BTU/hour] 17.85 BTU/hour

4.4.1.7 SSD-SATA960G-C (SSD-SATA960G-C-Solid State Drives,2.5inch)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 451

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Overview

Table 4-263 Basic information about the SSD-SATA960G-C

Item Details

Description SSD-SATA960G-C-Solid State Drives,

2.5inch

Part Number 02313XEE

Model SSD-SATA960G-C

Silkscreen M.2

Appearance

Figure 4-183 Appearance of the SSD-SATA960G-C

Version Mapping

Table 4-264 Mappings between SSD-SATA960G-C and product models

Product Product Model First Supported Version

USG6575E-B USG6575E-B-AC V600R007C20SPC602

(02353LKD)

USG6575E-B USG6575E-B-AC V600R007C20SPC602

(02353LKD-002)

USG6630E USG6630E-AC V600R007C20SPC602

(02352FQA)

USG6630E USG6630E-DC V600R007C20SPC602

(02352CKV)

USG6630E USG6630E-AC V600R007C20SPC602

(02352FQA-001)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 452

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6630E USG6630E-DC V600R007C20SPC602

(02352CKV-001)

USG6630E USG6630E-AC V600R007C20SPC602

(02352FQA-002)

USG6630E USG6630E-DC V600R007C20SPC602

(02352CKV-002)

USG6620E USG6620E-AC V600R007C20SPC602

(02352HMF)

USG6620E USG6620E-AC V600R007C20SPC602

(02352HMF-001)

USG6620E USG6620E-AC V600R007C20SPC602

(02352HMF-002)

USG6610E USG6610E-AC V600R007C20SPC602

(02352HMD)

USG6610E USG6610E-AC V600R007C20SPC602

(02352HMD-001)

USG6610E USG6610E-AC V600R007C20SPC602

(02352HMD-002)

USG6650E USG6650E-AC V600R007C20SPC602

(02351YRY)

USG6650E USG6650E-AC V600R007C20SPC602

(02351YRY-001)

USG6650E USG6650E-AC V600R007C20SPC602

(02351YRY-002)

USG6680E USG6680E-AC V600R007C20SPC602

(02351YRR)

USG6680E USG6680E-AC V600R007C20SPC602

(02351YRR-001)

USG6605E-B USG6605E-B-AC V600R007C20SPC602

(02353PSK)

USG6605E-B USG6605E-B-AC V600R007C20SPC602

(02353PSK-001)

USG6716E USG6716E-AC V600R007C20SPC602

(02351YRS)

USG6716E USG6716E V600R007C20SPC602

(02351YRS-001)

USG6635E USG6635E-DC V600R007C20SPC602

(02352RQE)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 453

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Product Product Model First Supported Version

USG6635E USG6635E-AC V600R007C20SPC602

(02352RQD)

USG6712E USG6712E-AC V600R007C20SPC602

(02352CNL)

USG6712E USG6712E V600R007C20SPC602

(02352CNL-001)

USG6625E USG6625E-AC V600R007C20SPC602

(02352RQN)

USG6615E USG6615E-AC V600R007C20SPC602

(02352RQL)

USG6655E USG6655E-AC V600R007C20SPC602

(02352RPS)

Panel

Figure 4-184 Panel of the SSD-SATA960G-C

1. ALM indicator 2. RUN indicator 3. Filler panel of the M.2

hard disk slot
NOTE
The hard disk slot function
is reserved and is not
enabled.

Table 4-265 Indicators on the SSD-SATA960G-C

Silkscreen Name Color Status Description

- Alarm Orange Steady on The hard disk

indicator is faulty.

- Off The hard disk

is running
properly.

- Running Green Steady on The hard disk

indicator is in position.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 454

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Silkscreen Name Color Status Description

Green Blinking Data is being

read from or
written to the
hard disk.

- Off The hard disk

is not
detected or
the device is
not powered
on.

Functions and Features

Table 4-266 Functions and features of the SSD-SATA960G-C

Functions and Features Description

Basic function Store logs.

Hot swapping Hot swapping is supported, but hard

disks cannot be forcibly inserted or
removed. Instead, run the disk offline
command and wait for about 30
seconds until the system displays a
message indicating that the hard disk
stops working. Then you can remove
the hard disk. Alternatively, press and
hold down the OFL button for about 4
seconds until the OFL indicator is on,
and then remove the hard disk unit.
Otherwise, the hard disk may be
damaged, data may be lost, or the
system may break down.

Restrictions and remarks Do not perform low-level formatting

on the hard disk. Otherwise, the hard
disk cannot be used.

Technical Specifications

Table 4-267 Technical specifications of the SSD-SATA960G-C

Item Specification

Form factor 2.5 inch

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 455

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Specification

Dimensions without packaging (H x W 15 mm x 75 mm x 130 mm (0.59 in. x

x D) [mm(in.)] 2.95 in. x 5.12 in.)

Weight without packaging [kg(lb)] 0.135 kg (0.3 lb)

Storage capacity [GB] 960

Port type SATA

Maximum power consumption [W] 5.23 W

Maximum heat dissipation [BTU/hour] 17.85 BTU/hour

4.5 Optical/Electrical Modules

This chapter describes hardware information for optical/electrical modules of the
USG6000E.

4.5.1 Before You Start

Before using the optical module, please understand the risk of using the non-
certified optical module and how to How to Identify Huawei-Certified optical
modules.

NOTICE

● A USG must use optical modules that have been certified for use. Non-certified
optical modules cannot ensure transmission reliability and may affect service
stability. Huawei is not liable for any problem caused by the use of non-
certified optical modules and will not fix such problems.
● The methods provided here are only for reference. To confirm whether optical
modules you are using have been certified for use on Huawei USGs, contact
Huawei technical support.

Risks of Using Non-Huawei-Certified Optical Modules

During certification of optical modules for USG, Huawei completes comprehensive
functionality verification to ensure quality of optical modules. The verified items
include optical module plug/unplug, transmit optical power, receive optical power,
signal transmission quality, data reading, error tolerance, compatibility,
electromagnetic compatibility (EMC), and environmental parameters.

Non-Huawei-certified optical modules may cause the following problems:

● Non-standard structure and size cause failures to install optical modules on

adjacent optical interfaces.
Structures or sizes of some non-Huawei-certified optical modules do not
comply with the Multi-Source Agreement (MSA). When such an optical

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 456

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

module is installed on an optical interface, the size of this optical module

hinders optical module installation on adjacent optical interfaces.
● Data bus defects cause suspension of a USG's data bus.
Some non-Huawei-certified optical modules have defects in data bus designs.
Using such an optical module on a USG causes suspension of the connected
data bus on the USG. As a result, data on the suspended bus cannot be read.
● Improper edge connector size damages electronic devices of optical interfaces.
If a non-Huawei-certified USG optical module with improper edge connector
size is used on an optical interface, electronic devices of the optical interface
will be damaged by short circuits.
● Unnormalized temperature monitoring causes incorrect alarms.
The temperature monitoring systems of some non-Huawei-certified USG
optical modules do not comply with industry standards and report
temperature values higher than the real temperature. When such optical
modules are used on a USG, the system will report incorrect temperature
alarms.
● Improper register settings cause errors or failures in reading parameters or
diagnostic information.
Some non-Huawei-certified USG optical modules have improper register
values on page A0, which can cause errors or failures when the system
attempts to read parameters or diagnostic information from a data bus.
● Some non-Huawei-certified USG optical modules are not designed in
compliance with EMC standards and have low anti-interference capability.
Additionally, they bring electromagnetic interference to nearby devices.
● The operating temperature ranges of non-Huawei-certified USG optical
modules cannot meet service requirements. When they are used under
relatively high temperature, the optical power decreases, resulting in service
interruption.

How to Identify Huawei-Certified Optical Modules

Method 1: Check for "HUAWEI" on the label

If an optical module has been certified by Huawei, its label contains "HUAWEI", as
shown in Figure 4-185.

Figure 4-185 "HUAWEI" on the label of a Huawei-certified optical module

Method 2: Run the display esn interface command

If Certified is YES, and VendorName is huawei in the display esn interface

command output, the optical module has been certified by Huawei. Otherwise, it
is not a Huawei-certified optical module.

4.5.2 100Mbps SFP Optical Modules

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 457

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.5.2.1 S-SFP-FE-LH40-SM1310

Table 4-268 S-SFP-FE-LH40-SM1310 specifications

Item Value

Basic Information

Module name S-SFP-FE-LH40-SM1310

Part Number 02317344

Model S-SFP-FE-LH40-SM1310

Form factor eSFP

Application standard STM-1

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 155Mbit/s

Target transmission distance [km] 40 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 0 dBm

Minimum Tx optical power [dBm] -5 dBm

Minimum extinction ratio [dB] 10.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -37 dBm

Overload power (AVG) [dBm] -10 dBm

4.5.2.2 S-SFP-FE-LH80-SM1550

Table 4-269 S-SFP-FE-LH80-SM1550 specifications

Item Value

Basic Information

Module name S-SFP-FE-LH80-SM1550

Part Number 02317345

Model S-SFP-FE-LH80-SM1550

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 458

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Form factor eSFP

Application standard STM-1

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 155Mbit/s

Target transmission distance [km] 80 km

Transmitter Optical Characteristics

Center wavelength [nm] 1550 nm

Maximum Tx optical power [dBm] 0 dBm

Minimum Tx optical power [dBm] -5 dBm

Minimum extinction ratio [dB] 10.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -37 dBm

Overload power (AVG) [dBm] -10 dBm

4.5.2.3 SFP-FE-LX-SM1310-BIDI

Table 4-270 SFP-FE-LX-SM1310-BIDI specifications

Item Value

Basic Information

Module name SFP-FE-LX-SM1310-BIDI

Part Number 02315203

Model SFP-FE-LX-SM1310-BIDI

Form factor eSFP

Application standard 100BASE-BX

Connector type LC/PC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 155Mbit/s

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 459

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Target transmission distance [km] 15 km

Transmitter Optical Characteristics

Center wavelength [nm] TX1550/RX1310

Maximum Tx optical power [dBm] -8 dBm

Minimum Tx optical power [dBm] -15 dBm

Minimum extinction ratio [dB] 8.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -32 dBm

Overload power (AVG) [dBm] -8 dBm

NOTE
BIDI optical modules must be used in pairs. For example, SFP-FE-LX-SM1310-BIDI must be
used with SFP-FE-LX-SM1550-BIDI.

4.5.2.4 SFP-FE-LX-SM1550-BIDI

Table 4-271 SFP-FE-LX-SM1550-BIDI specifications

Item Value

Basic Information

Module name SFP-FE-LX-SM1550-BIDI

Part Number 02315202

Model SFP-FE-LX-SM1550-BIDI

Form factor eSFP

Application standard 100BASE-BX

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 155Mbit/s

Target transmission distance [km] 15 km

Transmitter Optical Characteristics

Center wavelength [nm] TX1550/RX1310

Maximum Tx optical power [dBm] -8 dBm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 460

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Minimum Tx optical power [dBm] -15 dBm

Minimum extinction ratio [dB] 8.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -32 dBm

Overload power (AVG) [dBm] -8 dBm

NOTE
BIDI optical modules must be used in pairs. For example, SFP-FE-LX-SM1550-BIDI must be
used with SFP-FE-LX-SM1310-BIDI.

4.5.2.5 SFP-FE-SX-MM1310

Table 4-272 SFP-FE-SX-MM1310 specifications

Item Value

Basic Information

Module name SFP-FE-SX-MM1310

Part Number 02315233

Model SFP-FE-SX-MM1310

Form factor SFP

Application standard 100BASE-FX

Connector type LC

Optical fiber type MMF

Working case temperature [°C(°F)] 0°C to 70°C (32°F to 158°F)

Transmission rate [bit/s] 100 Mbit/s

Target transmission distance [km] Multimode fiber (50 μm or 62.5 μm

diameter): 2 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] -14.0 dBm

Minimum Tx optical power [dBm] -19.0 dBm

Minimum extinction ratio [dB] 10 dB

Receiver Optical Characteristics

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 461

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Rx sensitivity (AVG) [dBm] -30.0 dBm

Overload power (AVG) [dBm] -14.0 dBm

4.5.2.6 eSFP-FE-LX-SM1310

Table 4-273 eSFP-FE-LX-SM1310 specifications

Item Value

Basic Information

Module name eSFP-FE-LX-SM1310

Part Number 02315205

Model eSFP-FE-LX-SM1310

Form factor eSFP

Application standard STM-1

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 155Mbit/s

Target transmission distance [km] 15 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] -8 dBm

Minimum Tx optical power [dBm] -15 dBm

Minimum extinction ratio [dB] 8.2 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -28 dBm

Overload power (AVG) [dBm] -8 dBm

4.5.3 1Gbps SFP Copper Modules

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 462

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.5.3.1 SFP-1000BaseT

Table 4-274 SFP-1000BaseT specifications

Item Value

Basic Information

Module name SFP-1000BaseT

Part Number 02314171

Model SFP-1000BaseT

Form factor SFP

Application standard 1000BASE-T

Connector type CAT5 UTP/STP

Optical fiber type -

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 10-1000M

Target transmission distance [km] 0.1 km

Transmitter Optical Characteristics

Center wavelength [nm] -

Maximum Tx optical power [dBm] -

Minimum Tx optical power [dBm] -

Minimum extinction ratio [dB] -

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -

Overload power (AVG) [dBm] -

4.5.4 1Gbps eSFP Optical Modules

4.5.4.1 OSU015N00

Table 4-275 OSU015N00 specifications

Item Value

Basic Information

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 463

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Module name OSU015N00

Part Number 02310CPX

Model OSU015N00

Form factor eSFP

Application standard -

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 155M-2.67G

Target transmission distance [km] 15 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 0 dBm

Minimum Tx optical power [dBm] -5 dBm

Minimum extinction ratio [dB] 8.2 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -21 dBm

Overload power (AVG) [dBm] 0 dBm

4.5.4.2 S-SFP-GE-LH40-SM1310

Table 4-276 S-SFP-GE-LH40-SM1310 specifications

Item Value

Basic Information

Module name S-SFP-GE-LH40-SM1310

Part Number 02317346

Model S-SFP-GE-LH40-SM1310

Form factor eSFP

Application standard 1000base-LX/LH

Connector type LC

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 464

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 1.25Gbit/s

Target transmission distance [km] 40 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 0 dBm

Minimum Tx optical power [dBm] -5 dBm

Minimum extinction ratio [dB] 9 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -23 dBm

Overload power (AVG) [dBm] -3 dBm

4.5.4.3 S-SFP-GE-LH40-SM1550

Table 4-277 S-SFP-GE-LH40-SM1550 specifications

Item Value

Basic Information

Module name S-SFP-GE-LH40-SM1550

Part Number 02317347

Model S-SFP-GE-LH40-SM1550

Form factor eSFP

Application standard 1000BASE-LX

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 1.25Gbit/s

Target transmission distance [km] 40 km

Transmitter Optical Characteristics

Center wavelength [nm] 1550 nm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 465

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Maximum Tx optical power [dBm] 0 dBm

Minimum Tx optical power [dBm] -5 dBm

Minimum extinction ratio [dB] 9.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -22 dBm

Overload power (AVG) [dBm] -3 dBm

4.5.4.4 S-SFP-GE-LH80-SM1550

Table 4-278 S-SFP-GE-LH80-SM1550 specifications

Item Value

Basic Information

Module name S-SFP-GE-LH80-SM1550

Part Number 02317348

Model S-SFP-GE-LH80-SM1550

Form factor eSFP

Application standard 1000BASE-ZX

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 1.25Gbit/s

Target transmission distance [km] 80 km

Transmitter Optical Characteristics

Center wavelength [nm] 1550 nm

Maximum Tx optical power [dBm] 5 dBm

Minimum Tx optical power [dBm] -2 dBm

Minimum extinction ratio [dB] 9 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -23 dBm

Overload power (AVG) [dBm] -3 dBm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 466

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.5.4.5 SFP-GE-LX-SM1310

Table 4-279 SFP-GE-LX-SM1310 specifications

Item Value

Basic Information

Module name SFP-GE-LX-SM1310

Part Number 02315200

Model SFP-GE-LX-SM1310

Form factor eSFP

Application standard 1000BASE-LX10/LH

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 1.25Gbit/s

Target transmission distance [km] 10 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] -3 dBm

Minimum Tx optical power [dBm] -9 dBm

Minimum extinction ratio [dB] 9 dB

Receiver Optical Characteristics

Rx operating wavelength range [nm] -

Rx sensitivity (AVG) [dBm] -20 dBm

Overload power (AVG) [dBm] -3 dBm

4.5.4.6 SFP-GE-LX-SM1310-BIDI (02315285)

Table 4-280 SFP-GE-LX-SM1310-BIDI specifications

Item Value

Basic Information

Module name SFP-GE-LX-SM1310-BIDI

Part Number 02315285

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 467

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Model SFP-GE-LX-SM1310-BIDI

Form factor eSFP

Application standard 1000base-BX

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 1.25Gbit/s

Target transmission distance [km] 10 km

Transmitter Optical Characteristics

Center wavelength [nm] TX1310/RX1490

Maximum Tx optical power [dBm] -3 dBm

Minimum Tx optical power [dBm] -9 dBm

Minimum extinction ratio [dB] 6 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -19.5 dBm

Overload power (AVG) [dBm] -3 dBm

4.5.4.7 SFP-GE-LX-SM1490-BIDI (02315286)

Table 4-281 SFP-GE-LX-SM1490-BIDI specifications

Item Value

Basic Information

Module name SFP-GE-LX-SM1490-BIDI

Part Number 02315286

Model SFP-GE-LX-SM1490-BIDI

Form factor eSFP

Application standard 1000base-BX

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 468

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Transmission rate [bit/s] 1.25Gbit/s

Target transmission distance [km] 10 km

Transmitter Optical Characteristics

Center wavelength [nm] TX1490/RX1310

Maximum Tx optical power [dBm] -3 dBm

Minimum Tx optical power [dBm] -9 dBm

Minimum extinction ratio [dB] 6 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -19.5 dBm

Overload power (AVG) [dBm] -3 dBm

4.5.4.8 eSFP-GE-SX-MM850

Table 4-282 eSFP-GE-SX-MM850 specifications

Item Value

Basic Information

Module name eSFP-GE-SX-MM850

Part Number 02315204

Model eSFP-GE-SX-MM850

Form factor eSFP

Application standard 1000base-SX

Connector type LC

Optical fiber type MMF

Working case temperature [°C(°F)] -20°C to 85°C

Transmission rate [bit/s] 2.125Gbit/s

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 469

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Target transmission distance [km] - Multimode fiber (with diameter of

62.5 μm): 220 m
- Multimode fiber (OM1) (with
diameter of 62.5 μm): 275 m
- Multimode fiber (with diameter of 50
μm): 500 m
- Multimode fiber (OM2) (with
diameter of 50 μm): 550 m

Modal bandwidth [MHz*km] - Multimode fiber: 160 MHz*km

- Multimode fiber (OM1): 200
MHz*km
- Multimode fiber: 400 MHz*km
- Multimode fiber (OM2): 500
MHz*km

Transmitter Optical Characteristics

Center wavelength [nm] 850 nm

Maximum Tx optical power [dBm] -2.5 dBm

Minimum Tx optical power [dBm] -9.5 dBm

Minimum extinction ratio [dB] 9 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -17 dBm

Overload power (AVG) [dBm] 0 dBm

4.5.4.9 eSFP-GE-ZX100-SM1550 (02315206)

Table 4-283 eSFP-GE-ZX100-SM1550 specifications

Item Value

Basic Information

Module name eSFP-GE-ZX100-SM1550

Part Number 02315206

Model eSFP-GE-ZX100-SM1550

Form factor eSFP

Application standard 1000base-ZX

Connector type LC

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 470

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 1.25Gbit/s

Target transmission distance [km] 100 km

Transmitter Optical Characteristics

Center wavelength [nm] 1550 nm

Maximum Tx optical power [dBm] 5 dBm

Minimum Tx optical power [dBm] 0 dBm

Minimum extinction ratio [dB] 8 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -30 dBm

Overload power (AVG) [dBm] -9 dBm

4.5.5 10Gbps SFP+ Optical Modules

4.5.5.1 OMXD30000

Table 4-284 OMXD30000 specifications

Item Value

Basic Information

Module name OMXD30000

Part Number 02318169

Model OMXD30000

Form factor SFP+

Application standard 10GBASE-SR

Connector type LC

Optical fiber type MMF

Bit error ratio (BER) -

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 10Gbit/s

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 471

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Target transmission distance [km] 0.3 km

Transmitter Optical Characteristics

Center wavelength [nm] 850 nm

Maximum Tx optical power [dBm] -1 dBm

Minimum Tx optical power [dBm] -7.3 dBm

Minimum extinction ratio [dB] 3 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -9.9 dBm

Overload power (AVG) [dBm] -1 dBm

4.5.5.2 OSX010000

Table 4-285 OSX010000 specifications

Item Value

Basic Information

Module name OSX010000

Part Number 02318170

Model OSX010000

Form factor SFP+

Application standard 10GBASE-LR

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 10Gbit/s

Target transmission distance [km] 10 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 0.5 dBm

Minimum Tx optical power [dBm] -8.2 dBm

Minimum extinction ratio [dB] 3.5 dB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 472

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -12.6 dBm

Overload power (AVG) [dBm] 0.5 dBm

4.5.5.3 OSX040N01

Table 4-286 OSX040N01 specifications

Item Value

Basic Information

Module name OSX040N01

Part Number 02310CNF

Model OSX040N01

Form factor SFP+

Application standard 10GBASE-ER

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 10Gbit/s

Target transmission distance [km] 40 km

Transmitter Optical Characteristics

Center wavelength [nm] 1550 nm

Maximum Tx optical power [dBm] 4 dBm

Minimum Tx optical power [dBm] -4.7 dBm

Minimum extinction ratio [dB] 3 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -14.1 dBm

Overload power (AVG) [dBm] 0.5 dBm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 473

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.5.5.4 SFP-10G-BXD1

Table 4-287 SFP-10G-BXD1 specifications

Item Value

Basic Information

Module name SFP-10G-BXD1

Part Number 02310QDT

Model SFP-10G-BXD1

Form factor SFP+

Application standard 10GBase-BIDI

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 2.5Gbit/s-11.3Gbit/s

Target transmission distance [km] 10 km

Transmitter Optical Characteristics

Center wavelength [nm] TX1330/RX1270

Maximum Tx optical power [dBm] 0.5 dBm

Minimum Tx optical power [dBm] -8.2 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -14.4 dBm

Overload power (AVG) [dBm] 0.5 dBm

4.5.5.5 SFP-10G-BXU1

Table 4-288 SFP-10G-BXU1 specifications

Item Value

Basic Information

Module name SFP-10G-BXU1

Part Number 02310QBJ

Model SFP-10G-BXU1

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 474

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Form factor SFP+

Application standard 10GBase-BIDI

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 2.5Gbit/s-11.3Gbit/s

Target transmission distance [km] 10 km

Transmitter Optical Characteristics

Center wavelength [nm] TX1270/RX1330

Maximum Tx optical power [dBm] 0.5 dBm

Minimum Tx optical power [dBm] -8.2 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -14.4 dBm

Overload power (AVG) [dBm] 0.5 dBm

4.5.5.6 SFP-10G-USR

Table 4-289 SFP-10G-USR specifications

Item Value

Basic Information

Module name SFP-10G-USR

Part Number 02310MNW

Model SFP-10G-USR

Form factor SFP+

Application standard 10Gbase-USR

Connector type LC

Optical fiber type MMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 10.31Gbit/s

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 475

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Target transmission distance [km] 0.1 km

Transmitter Optical Characteristics

Center wavelength [nm] 850 nm

Maximum Tx optical power [dBm] -1 dBm

Minimum Tx optical power [dBm] -7.3 dBm

Minimum extinction ratio [dB] 3 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -10.7 dBm

Overload power (AVG) [dBm] 0.5 dBm

4.5.5.7 SFP-10G-ZR

Table 4-290 SFP-10G-ZR specifications

Item Value

Basic Information

Module name SFP-10G-ZR

Part Number 02310SNN

Model SFP-10G-ZR

Form factor SFP+

Application standard 10Gbase-ZR

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 9.95Gbit/s-10.31Gbit/s

Target transmission distance [km] 80 km

Transmitter Optical Characteristics

Center wavelength [nm] 1550 nm

Maximum Tx optical power [dBm] 4 dBm

Minimum Tx optical power [dBm] 0 dBm

Minimum extinction ratio [dB] 9 dB

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 476

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -24 dBm

Overload power (AVG) [dBm] -7 dBm

4.5.6 40Gbps QSFP+ Optical Modules

4.5.6.1 QSFP-40G-LR4 (02310MHS)

Table 4-291 QSFP-40G-LR4 specifications

Item Value

Basic Information

Module name QSFP-40G-LR4

Part Number 02310MHS

Model QSFP-40G-LR4

Form factor QSFP+

Application standard 40GBASE-LR4

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 41.25Gbit/s

Target transmission distance [km] 10 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 2.3 dBm

Minimum Tx optical power [dBm] -7 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -11.5 dBm

Overload power (AVG) [dBm] 2.3 dBm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 477

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.5.6.2 QSFP-40G-SDLC-PAM

Table 4-292 QSFP-40G-SDLC-PAM specifications

Item Value

Basic Information

Module name QSFP-40G-SDLC-PAM

Part Number 02311PUU

Model QSFP-40G-SDLC-PAM

Form factor QSFP+

Application standard 40GBase-SDLC

Connector type LC

Optical fiber type MMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 41.25Gbit/s

Target transmission distance [km] - Multimode fiber (OM3) (with

diameter of 50 μm): 0.1 km
- Multimode fiber (OM4) (with
diameter of 50 μm): 0.15 km

Modal bandwidth [MHz*km] - Multimode fiber (OM3): 2000

MHz*km
- Multimode fiber (OM4): 4700
MHz*km

Transmitter Optical Characteristics

Center wavelength [nm] 850 nm

Maximum Tx optical power [dBm] 2.4 dBm

Minimum Tx optical power [dBm] -2.5 dBm

Minimum extinction ratio [dB] 3 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -8 dBm

Overload power (AVG) [dBm] 2.4 dBm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 478

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.5.6.3 QSFP-40G-SR-BD (02311FPA)

Table 4-293 QSFP-40G-SR-BD specifications

Item Value

Basic Information

Module name QSFP-40G-SR-BD

Part Number 02311FPA

Model QSFP-40G-SR-BD

Form factor QSFP+

Application standard 40GBase-BD

Connector type LC

Optical fiber type MMF

Working case temperature [°C(°F)] 10°C to 70°C

Transmission rate [bit/s] 41.25Gbit/s

Target transmission distance [km] 0.1 km

Transmitter Optical Characteristics

Center wavelength [nm] 850 nm, 900 nm

Maximum Tx optical power [dBm] 5 dBm

Minimum Tx optical power [dBm] -4 dBm

Minimum extinction ratio [dB] 4.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -4.5 dBm

Overload power (AVG) [dBm] 5 dBm

4.5.6.4 QSFP-40G-eSR4 (02310RMB)

Table 4-294 QSFP-40G-eSR4 specifications

Item Value

Basic Information

Module name QSFP-40G-eSR4

Part Number 02310RMB

Model QSFP-40G-eSR4

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 479

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Form factor QSFP+

Application standard 40GBase-eSR4

Connector type MPO

Optical fiber type MMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 41.25Gbit/s

Target transmission distance [km] - Multimode fiber (OM2) (with

diameter of 50 μm): 82 m
- Multimode fiber (OM3) (with
diameter of 50 μm): 300 m
- Multimode fiber (OM4) (with
diameter of 50 μm): 400 m

Modal bandwidth [MHz*km] - Multimode fiber (OM2): 500

MHz*km
- Multimode fiber (OM3): 2000
MHz*km
- Multimode fiber (OM4): 4700
MHz*km

Transmitter Optical Characteristics

Center wavelength [nm] 850 nm

Maximum Tx optical power [dBm] 0.5 dBm

Minimum Tx optical power [dBm] -7.6 dBm

Minimum extinction ratio [dB] 3 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -5.4 dBm

Overload power (AVG) [dBm] 2.4 dBm

4.5.6.5 QSFP-40G-iSR4 (02310MHR)

Table 4-295 QSFP-40G-iSR4 specifications

Item Value

Basic Information

Module name QSFP-40G-iSR4

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 480

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Part Number 02310MHR

Model QSFP-40G-iSR4

Form factor QSFP+

Application standard 40GBASE-SR4

Connector type MPO

Optical fiber type MMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 41.25Gbit/s

Target transmission distance [km] - Multimode fiber (OM3) (with

diameter of 50 μm): 100 m
- Multimode fiber (OM4) (with
diameter of 50 μm): 150 m

Modal bandwidth [MHz*km] - Multimode fiber (OM3): 2000

MHz*km
- Multimode fiber (OM4): 4700
MHz*km

Transmitter Optical Characteristics

Center wavelength [nm] 850 nm

Maximum Tx optical power [dBm] 0.5 dBm

Minimum Tx optical power [dBm] -7.6 dBm

Minimum extinction ratio [dB] 3 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -9.5 dBm

Overload power (AVG) [dBm] 2.4 dBm

4.5.6.6 QSFP-40G-LX4

Table 4-296 QSFP-40G-LX4 specifications

Item Value

Basic Information

Module name QSFP-40G-LX4

Part Number 02311HNP

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 481

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Model QSFP-40G-LX4

Form factor QSFP+

Application standard 40G-LX4

Connector type LC

Optical fiber type MMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 41.25 bit/s

Target transmission distance [km] 0.15 km

Transmitter Optical Characteristics

Center wavelength [nm] 1271nm,1291nm,1311nm,1331nm

Maximum Tx optical power [dBm] 2.3 dBm

Minimum Tx optical power [dBm] -7 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -11.5 dBm

Overload power (AVG) [dBm] 2.3 dBm

4.5.6.7 QSFP-40G-ER4

Table 4-297 QSFP-40G-ER4 specifications

Item Value

Basic Information

Module name QSFP-40G-ER4

Part Number 02311BKT

Model QSFP-40G-ER4

Form factor QSFP+

Application standard 40GBASE-ER4

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 482

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Transmission rate [bit/s] 41.25Gbit/s

Target transmission distance [km] 40 km

Transmitter Optical Characteristics

Center wavelength [nm] 1271nm, 1291nm, 1311nm, 1331nm

Maximum Tx optical power [dBm] 4.5 dBm

Minimum Tx optical power [dBm] -2.7 dBm

Minimum extinction ratio [dB] 5.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -16.8 dBm

Overload power (AVG) [dBm] 2.3 dBm

4.5.6.8 QSFP-40G-LR4-Lite (02311YVB)

Table 4-298 QSFP-40G-LR4-Lite specifications

Item Value

Basic Information

Module name QSFP-40G-LR4-Lite

Part Number 02311YVB

Model QSFP-40G-LR4-Lite

Form factor QSFP+

Application standard 40GBASE-LR4 Lite

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 40Gbit/s

Target transmission distance [km] 2 km

Transmitter Optical Characteristics

Center wavelength [nm] 1271nm, 1291nm, 1311nm, 1331nm

Maximum Tx optical power [dBm] 2.3 dBm

Minimum Tx optical power [dBm] -9 dBm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 483

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -13.5 dBm

Overload power (AVG) [dBm] 2.3 dBm

4.5.6.9 QSFP-40G-LX4-MM

Table 4-299 QSFP-40G-LX4-MM specifications

Item Value

Basic Information

Module name QSFP-40G-LX4-MM

Part Number 02313NUG

Model QSFP-40G-LX4-MM

Form factor QSFP+

Application standard 40GBASE-LX4

Connector type LC

Optical fiber type MMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 40Gbit/s

Target transmission distance [km] Multimode OM3 optical fiber

(diameter: 50 μm): 150 m
Multimode OM4 optical fiber
(diameter: 50 μm): 150 m

Transmitter Optical Characteristics

Center wavelength [nm] 1271nm, 1291nm, 1311nm, 1331nm

Maximum Tx optical power [dBm] 2.3 dBm

Minimum Tx optical power [dBm] -7.0 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -10.5 dBm

Overload power (AVG) [dBm] 3.5 dBm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 484

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.5.6.10 QSFP-40G-eSDLC-PAM

Table 4-300 QSFP-40G-eSDLC-PAM specifications

Item Value

Basic Information

Module name QSFP-40G-eSDLC-PAM

Part Number 02311QTR

Model QSFP-40G-eSDLC-PAM

Form factor QSFP+

Application standard 40GBase-eSDLC-PAM4

Connector type MPO

Optical fiber type MMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 41.25Gbit/s

Target transmission distance [km] - Multimode fiber (OM3) (with

diameter of 50 μm): 100 m
- Multimode fiber (OM4) (with
diameter of 50 μm): 300 m

Modal bandwidth [MHz*km] - Multimode fiber (OM3): 2000

MHz*km
- Multimode fiber (OM4): 4700
MHz*km

Transmitter Optical Characteristics

Center wavelength [nm] 850 nm

Maximum Tx optical power [dBm] 2.4 dBm

Minimum Tx optical power [dBm] -2 dBm

Minimum extinction ratio [dB] 3 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -8 dBm

Overload power (AVG) [dBm] 2 dBm

4.5.7 100Gbps QSFP28 Optical Modules

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 485

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.5.7.1 QSFP-100G-CWDM4

Table 4-301 QSFP-100G-CWDM4 specifications

Item Value

Basic Information

Module name QSFP-100G-CWDM4

Part Number 02311MNN

Model QSFP-100G-CWDM4

Form factor QSFP28

Application standard 100GBase-CWDM4

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 100Gbit/s

Target transmission distance [km] 2 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 2.5 dBm

Minimum Tx optical power [dBm] -6.5 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -10 dBm

Overload power (AVG) [dBm] 2.5 dBm

4.5.7.2 QSFP28-100G-LR4 (02311KNU)

Table 4-302 QSFP28-100G-LR4 specifications

Item Value

Basic Information

Module name QSFP28-100G-LR4

Part Number 02311KNU

Model QSFP28-100G-LR4

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 486

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Form factor QSFP28

Application standard 100GBase-LR4

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 100Gbit/s

Target transmission distance [km] 10 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 4.5 dBm

Minimum Tx optical power [dBm] -4.3 dBm

Minimum extinction ratio [dB] 4 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -8.6 dBm

Overload power (AVG) [dBm] 4.5 dBm

4.5.7.3 QSFP28-100G-SR4 (02311GBW)

Table 4-303 QSFP28-100G-SR4 specifications

Item Value

Basic Information

Module name QSFP28-100G-SR4

Part Number 02311GBW

Model QSFP28-100G-SR4

Form factor QSFP28

Application standard 100GBase-SR4

Connector type MPO

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 100Gbit/s

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 487

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Target transmission distance [km] 0.1 km

Modal bandwidth [MHz*km] 4700 MHz*km

Transmitter Optical Characteristics

Center wavelength [nm] 850 nm

Maximum Tx optical power [dBm] 2.4 dBm

Minimum Tx optical power [dBm] -8.4 dBm

Minimum extinction ratio [dB] 2 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -10.3 dBm

Overload power (AVG) [dBm] 2.4 dBm

4.5.7.4 QSFP-100G-4WDM-40

Table 4-304 QSFP-100G-4WDM-40 specifications

Item Value

Basic Information

Module name QSFP-100G-4WDM-40

Part Number 02312QTL

Model QSFP-100G-4WDM-40

Form factor QSFP28

Application standard 100GBASE-4WDM

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 100Gbit/s

Target transmission distance [km] 40 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 2.9 dBm

Minimum Tx optical power [dBm] -2.5 dBm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 488

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Minimum extinction ratio [dB] 8 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -21.4 dBm

Overload power (AVG) [dBm] -3.5 dBm

4.5.7.5 QSFP-100G-CWDM4-ISP

Table 4-305 QSFP-100G-CWDM4-ISP specifications

Item Value

Basic Information

Module name QSFP-100G-CWDM4-ISP

Part Number 02312DYA

Model QSFP-100G-CWDM4-ISP

Form factor QSFP28

Application standard 100GBase-CWDM4

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 100Gbit/s

Target transmission distance [km] 2 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 2.5 dBm

Minimum Tx optical power [dBm] -6.5 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -10 dBm

Overload power (AVG) [dBm] 2.5 dBm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 489

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.5.7.6 QSFP-100G-CWDM4-Lite

Table 4-306 QSFP-100G-CWDM4-Lite specifications

Item Value

Basic Information

Module name QSFP-100G-CWDM4-Lite

Part Number 02312UJN

Model QSFP-100G-CWDM4-Lite

Form factor QSFP28

Application standard 100G-CWDM4-Lite

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 100Gbit/s

Target transmission distance [km] 2 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310nm

Maximum Tx optical power [dBm] 2.5 dBm

Minimum Tx optical power [dBm] -6.5 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -10 dBm

Overload power (AVG) [dBm] 2.5 dBm

4.5.7.7 QSFP-100G-ER4

Table 4-307 QSFP-100G-ER4 specifications

Item Value

Basic Information

Module name QSFP-100G-ER4

Part Number 02313HLU

Model QSFP-100G-ER4

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 490

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Form factor QSFP28

Application standard 100GBASE-ER4

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C (32°F to 158°F)

Transmission rate [bit/s] 100 Gbit/s

Target transmission distance [km] Single-mode fiber (G.652): 40 km

Transmitter Optical Characteristics

Center wavelength [nm] 1295 nm, 1300 nm, 1304 nm, 1309 nm

Maximum Tx optical power [dBm] 2.9 dBm

Minimum Tx optical power [dBm] -2.9 dBm

Minimum extinction ratio [dB] 8 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -20.9 dBm

Overload power (AVG) [dBm] -3.5 dBm

4.5.7.8 QSFP-100G-SWDM4

Table 4-308 QSFP-100G-SWDM4 specifications

Item Value

Basic Information

Module name QSFP-100G-SWDM4

Part Number 02311QUK

Model QSFP-100G-SWDM4

Form factor QSFP28

Application standard 100G-SWDM4

Connector type LC

Optical fiber type MMF

Working case temperature [°C(°F)] PC or UPC

Transmission rate [bit/s] 100Gbit/s

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 491

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Target transmission distance [km] Multimode fiber (OM3) (with

diameter of 50 μm): 75 m
Multimode fiber (OM4) (with
diameter of 50 μm): 100 m

Modal bandwidth [MHz*km] - Multimode fiber (OM3): 2000

MHz*km
- Multimode fiber (OM4): 4700
MHz*km

Transmitter Optical Characteristics

Center wavelength [nm] 850 nm

Maximum Tx optical power [dBm] 3.4 dBm

Minimum Tx optical power [dBm] -7.5 dBm

Minimum extinction ratio [dB] 2 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -10.5 dBm

Overload power (AVG) [dBm] 2.4 dBm

4.5.7.9 QSFP28-100G-1310-40km-SM

Table 4-309 QSFP28-100G-1310-40km-SM specifications

Item Value

Basic Information

Module name QSFP28-100G-1310-40km-SM

Part Number 02312NVQ

Model QSFP28-100G-1310-40km-SM

Form factor QSFP28

Application standard IEEE 802.3 100GBASE-ER4

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 100Gbit/s

Target transmission distance [km] 40 km

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 492

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 2.9 dBm

Minimum Tx optical power [dBm] -2.9 dBm

Minimum extinction ratio [dB] 8 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -20.9 dBm

Overload power (AVG) [dBm] -3.5 dBm

4.5.7.10 QSFP28-100G-DR

Table 4-310 QSFP28-100G-DR specifications

Item Value

Basic Information

Module name QSFP28-100G-DR

Part Number 02312VSP

Model QSFP28-100G-DR

Form factor QSFP28

Application standard 100GBase-DR

Connector type LC

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 100Gbit/s

Target transmission distance [km] 0.5 km

Transmitter Optical Characteristics

Center wavelength [nm] 1311 nm

Maximum Tx optical power [dBm] 4 dBm

Minimum Tx optical power [dBm] -2.9 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 493

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Item Value

Rx sensitivity (AVG) [dBm] -5.9 dBm

Overload power (AVG) [dBm] 4 dBm

4.5.7.11 QSFP28-100G-PSM4

Table 4-311 QSFP28-100G-PSM4 specifications

Item Value

Basic Information

Module name QSFP28-100G-PSM4

Part Number 02311MNM

Model QSFP28-100G-PSM4

Form factor QSFP28

Application standard 100GBASE-PSM4

Connector type MPO

Optical fiber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 100Gbit/s

Target transmission distance [km] 0.5 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 2 dBm

Minimum Tx optical power [dBm] -9.4 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -11.35 dBm

Overload power (AVG) [dBm] 2.2 dBm

4.6 Cables
This section describes the PGND cable, power cable, configuration cable, Ethernet
cable, and optical fiber of the USG.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 494

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

4.6.1 PGND Cable

4.6.1.1 PGND Cable

Connection
A ground cable is connected as follows:
● The M4 lug is connected to the ground point on the USG.
● The M6 lug is connected to the ground point or equipotential terminal on a
cabinet.

Appearance and Structure

A PGND cable has two OT terminals and a copper cable with yellow/green plastic
encapsulation. Figure 4-186 shows the appearance of a type of PGND cables.

NOTE

The figure is for reference only.

Figure 4-186 Appearance of the PGND cable

Figure 4-187 shows the appearance of the OT terminal.

Figure 4-187 OT terminal

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 495

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-312 Technical specifications of the PGND Cable

Descripti Part Model Connect Connect Cable Bend

on Number or X1 or X2 length radius

Power 0415061 IEC401 1417001 1417002 0.4 m -

Cable, 7 7: OT6-4 3: OT6-6
0.4m,
4mm^2,
OT6-4,22
7IEC02-4
^2G&Y,O
T6-6

Power 0415274 - OT2-16-8 OT16-6 0.85 m 30 mm

Cable, 8-001
4m,OT2-
16-8,H07
Z-
K-16^2G
&Y,OT16-
6,LSZH

4.6.2 AC Power Cable

4.6.2.1 AC Power Cable

Connection
An AC power cable is connected as follows:
● The C7 straight female or C13 straight female connector is connected to the
AC power socket of the USG.
● The PI straight male, PB straight male, PD angle male, or PG angle male
connector is connected to an external power source.

Use a single-phase 3-line electrical outlet that has been properly grounded. The
grounding point of the power supply must be reliably grounded in the building.
Generally, the grounding point of the power supply system of the building has
been buried in the grounding during the construction and wiring of the building.

NOTICE

Make sure that the power system of the building has been grounded before you
connect the USG with AC power cables.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 496

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Appearance and Structure

The USG provides both the European-standard and North American-standard AC
power cables. Figure 4-188 and Figure 4-189 list the reference specifications. You
can select the desired power cables based on your site conditions. For details
about the power cable appearance, see Quick Reference Tables of Power Cables.
You can view the photo of a power cable according to the corresponding BOM.

Figure 4-188 Appearance of the England AC power cable

Figure 4-189 Appearance of the North American-standard AC power cable

Table 4-313 lists the connectors of AC power cables.

Table 4-313 Connectors of AC power cables

Connector Description Wire Color

L Live wire Brown

N Null wire Blue

E PGND cable Yellow/Green

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 497

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-314 Technical specifications of the AC Power Cable

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 04020728 CC13NA30 PB straight C7 straight 3m

Cable,Amer 0 male female
ica AC
Power
Cable,
125V10A,
3.0m,PBSM
,
18SJT(3C),
C13SF,Blac
k

Power 04040887 CC13JP300 PB straight C13 3m

Cable,Japa male straight
n AC female
Power
Cable
125V12A,
3.0m,PBSM
,HVCTF-1.2
5mm^2(3C
),C13SF,Bla
ck

Power 04040888 CC13AU30 PI straight C13 3m

Cords 0 male straight
Cable,Austr female
alia AC
Power
Cable,250V
10A,
3.0m,PISM,
H05VV-
F-1.0mm^
2(3C),C13S
F,Black

Power 04040889 CC13HK30 PM-I angle C13 3m

cord,BS546 0 male straight
250V10A, female
3.0m,PM-
IAM,H05VV
-
F-1.5mm^
2(3C),C13S
F,250V,
10A,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 498

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 04040890 CC13UK30 PG angle C13 3m

Cable,Britai 0 male straight
n AC female
Power
Cable
250V10A,
3.0m,PGA
M ,H05VV-
F-1.0mm^
2(3C),C13S
F,Black

Power 04041056 CC13EU30 PF straight C13 3m

cord,Europ 0 male straight
e AC Power female
Cable,
250V10A,
3.0m,PFSM
,(H05VVF
1.0^2(3C)),
C13SF,
250V,
10A,BLack

Power 04041104 CPACH030 PI straight C13 3m

Cords 1 male straight
Cable,Chin female
a AC Power
250V10A,
3.0m,PISM,
227IEC53-1
.
0^2(3C),C1
3SF,Black

Power 04041117 CC13UK30 PG angle C13 left 3m

Cable,Britai 1 male angle
n AC female
Power connector
Cable
250V10A,
3.0m,PGA
M ,H05VV-
F-1.0mm^
2(3C),C13A
F-L,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 499

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 04041119 CC13CH30 PJ straight C13 3m

Cable,Switz 0 male straight
erland AC female
Power
Cable
250V10A,
3.0m,PJSM
,H05VV-
F-1.0mm^
2(3C),C13S
F,Black

Power 04041120 CC13IT300 PL straight C13 3m

Cable,Italy male straight
AC Power female
Cable
250V10A,
3.0m,PLSM,
H05VV-
F-1.0mm^
2(3C),C13S
F,Black

Power 04042697 C3X1CHN0 PI straight C13 10 m

Cords 0 male straight
Cable,Chin female
a AC Power
250V10A,
10.0m,PIS
M,
227IEC53-1
.
0^2(3C),C1
3SF,Black

Power 04042698 CPWR0010 PI straight C13 15 m

Cords 2 male straight
Cable,Chin female
a AC Power
250V10A,
15.0m,PIS
M,
227IEC53-1
.
0^2(3C),C1
3SF,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 500

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 04042699 CC13CN20 PI straight C13 20 m

Cords 0 male straight
Cable,Chin female
a AC Power
250V10A,
20.0m,PIS
M,
227IEC53-1
.
0^2(3C),C1
3SF,Black

External 04043491 CPC7SF201 PA straight C7 straight 2m

Power male female
Cable,
Power
Cable
250V2.5A,
2m,
2X0.75mm
^2,Black,PA
SM,
227IEC53-0
.75^2(2C)-
I,C7SF

Power 04044216 C0C7EU20 PC straight C7 straight 2m

cord,Europ 0 male female
e AC Power
250V2,2.0
m,PCSM,
(H03VVH2
F-0.5^2(2C
)),C7SF,Bla
ck

Power 04044496 C0C7JP200 PA straight C7 straight 2m

Cords male female
Cable,Japa
n AC
Power
125V7A,
2.0m,PASM
,VCTFK-0.7
5^2(2C),C7
SF,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 501

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 04044497 C0C7NA20 PA straight C7 straight 2m

Cable,Amer 0 male female
ica AC
Power
Cable
125V7A,
2.0m,PASM
,
18NISPT-1(
2C),C7SF,Bl
ack

Power 04044533 C0C7UK20 PG angle C7 straight 2m

Cable, 0 male female
Britain AC
Power
Cable
250V2.5A,
2.0m,PGA
M,H05VVH
2-
F-0.75mm^
2(2C),C7SF,
Black

Power 04044577 C0C7AU20 PI-I C7 straight 2m

Cords 0 straight female
Cable,Austr male
alia AC
Power
250V2.5A,
2.0m,PISM-
I,H03VVH2
F-0.75^2(2
C),C7SF,Bla
ck

Power 04045094 C0C7IN200 PC-II C7 straight 2m

Cords straight female
Cable,India male
AC Power
250V2.5A,
2.0m,PC-
IISM,IS
694-0.75^
2(2C),C7S,
250V,
2.5A,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 502

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 04045785 C0C7KO20 PC-I C7 straight 2m

cord,Korea 0 straight female
AC Power male
250V2.5A,
2.0m,PCSM
-I,K60227
IEC 52
0.75mm^2(
2C),C7SF,
250V,
2.5A,Black

Power 04047785 CC13AR30 PI straight C13 3m

Cords 0 male straight
Cable,Arge female
ntina AC
Power
250V10A,
3.0m,PISM,
H05VV-
F-1.0mm^
2(3C),C13S
F,Black

Power 04050139 CC13CN30 PI straight C13 3m

Cords 0 male straight
Cable,Chin female
a AC Power
Cable,
250V10A,
3m,PISM,
227IEC53-1
.
0^2(3C),C1
3SF,Black

Power 04050188 IDS2PWRC C14 C13 1.5 m

Cords BL00 straight straight
Cable,Chin male female
a AC Power
250V10A,
1.5m,C14S
M,
227IEC53(R
VV)1.0mm
^2(3C),C13
SF,PDU
Cable

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 503

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 04050206 CC13SA300 PI straight C13 1m

Cable,Chin male straight
a AC Power female
Cable
250V10A,
1.0m,PISM,
227IEC53(R
VV)1.0mm
^2(3C),C13
SF,Black

Power 04050206- W-AC250-5 PI straight C13 5m

Cable,Chin 001 male straight
a AC Power female
Cable
250V10A,
5.0m,PISM,
227IEC53(R
VV)1.0mm
^2(3C),C13
SF,Black

Power 04050517 CPC13SF00 PI straight C13 2m

Cable,Chin male straight
a AC Power female
Cable
250V10A,
2.0m,PISM,
227IEC53(R
VV)1.0mm
^2(3C),C13
SF,Black

Power 04050846 - C14 C13 3m

cord,China straight straight
AC Power male female
Cable,
250V10A,
3.0m,C14S
M,
(227IEC53-
1.0^2(3C)),
C13SF,
250V,
10A,Black,P
DU Cable

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 504

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 04050847 W-AC250-6 C14 C13 6m

cord,China straight straight
AC Power male female
Cable,
250V10A,
6.0m,C14S
M,
(227IEC53-
1.0^2(3C)),
C13SF,
250V,
10A,Black,P
DU Cable

Power 04050955 IDSV2DKB PI straight C13 1.5 m

Cords M55 male straight
Cable,Chin female
a AC
Power,
250V10A,
1.5m,PISM,
227IEC53(R
VV)1.0mm
^2(3C),C13
SF,250V,
10A,Black

Power Cord 04050956 C0C7BR200 PC-III C7 straight 2m

Cable,Brazil straight female
AC Power male
Cable,
250V2.5A,
2m,PC-
IIISM,H05V
VH2-F
2*0.75^2(2
C),C7SF,
250V,
2.5A,Black

Power 04051035 CC13ID300 PM-II C13 3m

cord,India angle male straight
AC Power female
250V6A,
3m,PM-
IIAM,IS
694-1.0^2(
3C),C13 SF,
250V,
6A,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 505

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 04051080 CC13SA300 PM angle C13 3m

cord,South male straight
Africa AC female
Power
250V10A,
3m,PMAM,
H05VV-
F-1.0mm^
2(3C),C13S
F,250V,
10A,Black

Power 04051081 C0C7OT20 PD-I angle C7 straight 2m

cord,BS546 0 male female
250V2.5A,
2m,PD-
IAM,H03VV
H2-
F-0.75mm^
2(2C),C7SF,
250V,
2.5A,Black

Power 04051997 - IRAM2063 C7 straight 2m

cord, straight female
2m,IRAM2 male
063
Straight
Male,H05V
VH2-F
2*0.75^2(2
C),C7
Straight
Female,
250V,
2.5A,BLACK

Power 04052137 CC13TW30 PB straight C13 3m

cord,Taiwa 0 male straight
n AC female
125V11A,
3.0m,PBSM
,HVCTF
3*1.25mm2
,C13SF,
125V,
11A,Black,
BSMI

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 506

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 04052138 - PA straight C7 straight 2m

cord,Taiwa male female
n AC
125V7A,
2.0m,PASM
,VCTFK2*0.
75mm2(2C
),C7SF,
125V,
7A,Black,BS
MI

Power 04052181 - C14 C7 straight 2m

cord,AC straight female
Power male
Cable
250V2.5A,
2.0m,C14S
M,H05VVH
2-
F-0.75mm^
2(2C),C7SF,
250V,
2.5A,Black,
Non-
standard
AC power
cable

Power 0405G019 CC13EU18 C14 C13 1.8 m

Cords 0 straight straight
Cable,Euro male female
pe AC
250V10A,
1.8m,C14S
M,H05VV-
F-
3*1.00^2,C
13SF,PDU
Cable

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 507

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 0405G025 C0C7SA200 PD angle C7 straight 2m

Cords male female
Cable,Sout
h Africa AC
Power
250V2.5A,
2m,PDAM,
H03VVH2-
F-0.75^2(2
C),C7SF

Power 0405G028 CC13KO30 PF straight C13 3m

Cords 0 male straight
Cable,Kore female
a AC Power
250V10A,
3m,PFSM,H
05VV-F
3*1.0^2(3C
),C13SF,Bla
ck

Power 0405G029 IDS2PWRC C14 C13 1.8 m

Cords BL0A straight straight
Cable,Nort male female
h America
AC Power
250V10A,
1.8m,C14S
M,SJT
18AWG(3C
),C13SF,PD
U Cable

Power 0405G02D IDS2PWRC C14 C13 1.8 m

Cords BL09 straight straight
Cable,Japa male female
n AC
Power
250V12A,
1.8m,C14S
M,HVCTF
1.25^2(3C)
,C13SF,PDU
Cable

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 508

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descriptio Part Model Connector Connector Cable

n Number X1 X2 length

Power 0405G02F IDS2PWRC C14 C13 1.8 m

Cords BL08 straight straight
Cable,Austr male female
alia AC
Power
250V10A,
1.8m,C14S
M,H05VV-
F-1.0^2(3C
),C13SF,PD
U Cable

Power 0405G02H IDS2PWRC C14 C13 1.8 m

Cords BL07 straight straight
Cable,Kore male female
a AC Power
250V10A,
1.8m,C14S
M,H05VV-
F-1.0^2(3C
),C13SF,PD
U Cable

Power 0405G02K CC13DE30 PK straight C13 3m

Cords 0 male straight
Cable,Den female
mark AC
Power
250V10A,
3m,PKSM,
H05VV-
F-3*1.0^2(
3C),C13SF,
Black

Power 04150258 CC13BR300 PN straight C13 3m

Cable,Brazil male straight
AC Power female
Cable
250V10A,
3.0m,PNS
M ,H05VV-
F-1.0mm^
2(3C),C13S
F,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 509

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTICE

You must connect the AC power cable in compliance with local standards and
requirements.

NOTE

● The cable with the C7 straight female X2 connector only to the desktop devices
USG6510E, USG6510E-POE, USG6530E.
● The cable with the C13 straight female X2 connector and non-C14 straight male X1
connector applies to non-desktop-mounted scenarios.
● The cable with the C13 straight female X2 connector and C14 straight male X1
connector applies to non-desktop models in PDU installation scenarios.

4.6.3 DC Power Cable

4.6.3.1 DC Power Cable

Connection
A DC power cable is connected as follows:

● One end is connected to the matching DC power terminal on the DC power

module of the USG.
● The other end is connected to an external power source.

Appearance and Structure

The DC power cables include the RTN cable, and NEG (-48 V) cable. Both the RTN
and NEG (-48 V) power cables consist of the terminal blocks and cables, as shown
in Figure 4-190. For details about the power cable appearance, see Quick
Reference Tables of Power Cables. You can view the photo of a power cable
according to the corresponding BOM.

Figure 4-190 Appearance of the DC power cable

Cable Type Color

NEG cable Blue

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 510

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Cable Type Color

RTN cable Black

The USG provides cord end terminals and OT terminals. You can select one of
them based on the actual condition.

Figure 4-191 shows the appearance of the cord end terminal.

Figure 4-191 Appearance of the cord end terminal

Figure 4-192 shows the appearance of the OT terminal without a cable.

Figure 4-192 Appearance of the OT terminal

Technical Specifications

Table 4-315 Technical specifications of the DC Power Cable

Descripti Part Model Connect Connect Cable Bend

on Number or X1 or X2 length radius

Power 0415069 DCWIRE 1419021 1417011 3m 24 mm

Cable, 5 A-3M 5: PS2F 4:
3m, 2*T4^2G
12AWG,P Y
S2F,
12UL101
5B
+12UL10
15BL,
2*T4^2G
Y

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 511

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descripti Part Model Connect Connect Cable Bend

on Number or X1 or X2 length radius

Power 0415288 PS2F- 1419117 1417011 3m 24 mm

Cable, 3 T4-3M 5: PS2F 4:
3m, 2*T4^2G
4^2mm,P Y
S2F,
(H07Z-
K-4^2B
+H07Z-
K-4^2BL)
,
2*T4^2G
Y

4.6.4 Console Cable

4.6.4.1 Console Cable

Connection
A console cable is connected as follows:
● The RJ45 connector is connected to the console port of the USG.
● The DB9 connector is connected to the COM port on a maintenance terminal.

Appearance and Structure

A console cable is an 8-wire shielded cable. Figure 4-193 shows the console cable.

Figure 4-193 Appearance of the Console Cable

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 512

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Name Description

DB9 DB9 connector(female). The connector has 9 pin holes

with IDs from 1 to 9. It connects to the COM port of a
PC.

RJ45 RJ45 connector

Pos Pin position

Pin Assignments
Table 4-316 lists the pin assignments of a console cable.

Table 4-316 Pin assignments of a console cable

USG Signal Description RJ45 Pin ID Signal DB9 Pin ID
Direction

NA RTS (Request to 1 ← 7
Send)

NA DTR (Data Terminal 2 ← 4

Ready)

TXD TXD (Transmit Data) 3 → 2

NA DCD (Data Carrier 4 → 1

Detect)

GND GND 5 - 5

RXD RXD (Receive Data) 6 ← 3

NA DSR (Data Set 7 → 6

Ready)

NA CTS (Clear to Send) 8 → 8

NOTE
Pins in the same row are connected to each other using a cable.
The symbol → indicates that the signal travels from the RJ45 connector to the DB9
connector, whereas the symbol ← indicates that the signal travels from the DB9 connector
to the RJ45 connector.
Pos. 9 of the DB9 connector is empty.

Technical Specifications
Table 4-317 shows the technical specifications of the console cable.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 513

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Table 4-317 Technical specifications of the console cable

Item Description

Connector 1 DB9 connector - D model - 9PIN - female

Connector 2 RJ45 Network Interface Connector, Crystal Connector, 8PIN,

8BIT, Shielded, Plug

Cable Single Cable, Console Serial Port Cable, 3 m, D9F,

CC4P0.48B(S), MP8-VI

Wire 8

4.6.5 Ethernet Cable

4.6.5.1 Ethernet Cable

Connection
The Ethernet cable, also called the network cable, is used for carrying signals on
Gigabit networks or networks with a lower packet rate.
Ethernet cables are classified into straight-through and crossover cables according
to the wiring scheme used at the two ends of the cables. The interfaces of the
USG can dynamically adapt to straight-through cables and crossover cables.

NOTICE

Figure 4-194 and Figure 4-195 show how to distinguish and make straight-
through cables and crossover cables. You need to strictly observe the wiring
scheme to ensure the quality of services.

● Straight-through cable
The straight-through cable is also called the standard cable. Both ends of the
cable use wiring scheme EIA/TIA T568A or EIA/TIA T568B. You are advised to
use wiring scheme EIA/TIA T568B when you make straight-through cables.
Figure 4-194 shows the detail.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 514

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-194 Schematic diagram of the connection scheme of straight-

through cables

You can use straight-through cables to connect:

– A switch or hub with an USG6000E
– Computers (including servers and workstations) with a switch or hub
● Crossover cable
The crossover cable uses wiring scheme EIA/TIA T568A for one end and
EIA/TIA T568B for the other, as shown in Figure 4-195.

Figure 4-195 Schematic diagram of the connection scheme of crossover

cables

You can use the crossover cables to connect:

– Two USG6000Es
– An USG6000E and a computer

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 515

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

– Two hubs
– A switch and hubs
– Two switches
– Two computers

Appearance and Structure

Network cables are classified into shielded and unshielded ones based on whether
the twisted pair and RJ45 connector are shielded, as shown in Figure 4-196 and
Figure 4-197.

Figure 4-196 Appearance of a shielded cable

Figure 4-197 Appearance of an unshielded cable

NOTE

The figure is for reference only.

An Ethernet cable consists of twisted pairs and RJ45 connectors, as shown in

Figure 4-198.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 516

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-198 Structure of the Ethernet Cable

Name Description

RJ45 RJ45 connector

Cable Category 5 or higher twisted pair network cable

PIN1 to PIN8 8 pins. Each pin has an ID ranging from 1 to 8.

Pin Assignments
The twisted pair network cable has eight wires. The connection between wires and
RJ45 connector pins complies with wiring scheme EIA/TIA 568A or EIA/TIA 568B,
as shown in Figure 4-199.

Figure 4-199 Wiring scheme EIA/TIA 568A or EIA/TIA 568B

EIA/TIA 568A EIA/TIA 568B

PINa Wireb PIN Wire

1 Green/White 1 Orange/White

2 Green 2 Orange

3 Orange/White 3 Green/White

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 517

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

EIA/TIA 568A EIA/TIA 568B

PINa Wireb PIN Wire

4 Blue 4 Blue

5 Blue/White 5 Blue/White

6 Orange 6 Green

7 Brown/White 7 Brown/White

8 Brown 8 Brown
NOTE
● a. An RJ45 connector has eight pins.
● b. The wire of a twisted pair connects to the RJ45 connector pin. The color of the plastic
jacket is considered as the name of the wire.

Technical Specifications
Table 4-318 lists the technical specifications of the Ethernet cable.

Table 4-318 Technical specifications of the Ethernet cable

Item Description

Connector 1 Shielded RJ45/Unshielded RJ45

and 2

Cable Category 5 or higher shielded/unshielded twisted pair network

cable

Wire 8

4.6.6 Optical Fiber

4.6.6.1 Optical Fiber

Connection
Optical fibers are used for carrying signals on Gigabit networks or networks with
higher packet rates. An optical fiber is a carrier of optical signals and transmits
optical signals over a short distance. An optical fiber is connected as follows:
● One end is connected to the optical port on the USG through the
corresponding optical module.
● The other end is connected to the optical port on the peer device.
Select optical modules and fibers based on peer device interfaces.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 518

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

NOTICE

You are advised to use Huawei optical modules. Optical modules from other
vendors may cause incompatibility issues and lead to faults on the USG6000E.

When using optical modules and optical fibers, pay attention to the following to
ensure proper communication between devices:

● Use single-mode and multi-mode optical fibers as required.

● Tx (sending) of the local device corresponds to Rx (receiving) of the peer
device.
● The wavelengths of the optical modules on both ends must be the same.
● Do not overbend optical fibers. The bend radius must not be shorter than 40
mm.

CAUTION

To avoid eye injuries, do not look straight at the optical transmit interface of
the laser or the optical connector.

Appearance and Structure

Optical fibers are classified into single-mode and multi-mode optical fibers.
Single-mode optical fibers are used for long-distance transmission whereas multi-
mode optical fibers are used for short-distance transmission. Indoor single-mode
optical fibers usually have a yellow jacket, as shown in Figure 4-200. The jacket of
the LC/PC-LC/PC multi-mode optical fiber is orange, as shown in Figure 4-201,
and that of the MPO/PC-MPO/PC multi-mode optical fiber is cyan, as shown in
Figure 4-202. Optical fibers are not delivered with the USG6000E. Purchase optical
fibers separately as required.

Figure 4-200 Appearance of the LC/PC-LC/PC single-mode optical fiber

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 519

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Figure 4-201 Appearance of the LC/PC-LC/PC multi-mode optical fiber

Figure 4-202 Appearance of the MPO/PC-MPO/PC multi-mode optical fiber

NOTICE

● To ensure the normal transmission of optical signals, do not use single-mode

optical fibers to connect multi-mode optical modules, nor multi-mode optical
fibers to connect single-mode optical modules.
● To connect extension optical fibers, purchase LC/PC-LC/PC adapters.

Optical fibers have multiple types of connectors. Common connectors types

include LC/PC, SC/PC, FC/PC and MPO/PC.
● LC/PC connector

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 520

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

The procedure for inserting and removing LC/PC connectors is as follows:

– Insert and remove the connector along the axis without rotating the
connector.
– When you insert the fiber, carefully insert the fiber head into the optical
interface on the interface board.
– To remove the optical fiber, squeeze the pinch on the fiber connector,
gently push on the fiber connector, and then pull it out.
● SC/PC connector

The procedure for inserting and removing SC/PC connectors is as follows:

– Insert and remove the connector along the axis without rotating the
connector.
– When you insert the fiber, carefully insert the fiber head into the optical
interface on the interface board.
– To remove the optical fiber, gently push on the fiber connector, and then
pull out the connector.
● FC/PC connector

The procedure for inserting and removing FC/PC connectors is as follows:

– When you insert an optical fiber, aim the FC/PC connector at the optical
interface on the interface board to avoid damaging the inner layer of the

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 521

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

optical interface. Then insert the fiber into the optical interface, rotate
the outer screw jacket clockwise, and then fasten the optical connector.
– To remove an optical fiber, rotate the outer screw jacket counter-
clockwise on the optical interface until the screw loosens. Then gently
pull out the optical fiber.
● MPO/PC optical fiber connector

Note the following points when removing and inserting an MPO/PC fiber
connector:
– When inserting the connector, hold the shell labeled "PUSH" and feed the
male connector into the female connector until you hear a clicking sound.
The male and female connectors are securely installed.
– To disassemble the connector, hold the shell labeled "PULL" and remove
the male connector.
There are four types of optical fibers for the USG6000E: LC/PC-LC/PC, LC/PC-
SC/PC, LC/PC-FC/PC, and MPO/PC-MPO/PC, which are based on the types of
connectors on both ends of the fibers, as listed in Table 4-319.

Table 4-319 Common optical fiber types

Type Transmission Connector
Mode
On the USG6000E On the peer device

LC/PC-LC/PC Single-mode/ LC/PC LC/PC

Multi-mode
LC/PC-SC/PC SC/PC

LC/PC-FC/PC FC/PC

MPO/PC- Multi-mode MPO/PC MPO/PC

MPO/PC

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 522

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Technical Specifications

Table 4-320 Technical specifications of the Optical Fiber

Descripti Part Model Connect Connect Cable Bend
on Number or X1 or X2 length radius

Patch 1413009 SS-OP-D- SC/PC SC/PC 5m 30 mm

Cord,SC/ 8 SC-S-5
PC,SC/
PC,Single
-mode,
5m,G.
652D,
3mm

Patch 1413019 SS-OP- LC/PC SC/PC 5m 30 mm

Cord,LC/ 3 LC-SC-
PC,SC/ S-5
PC,Single
-mode,
5m,G.
652D,
2mm

Patch 1413019 SS-OP-D- LC/PC LC/PC 5m 30 mm

Cord,LC/ 5 LC-S-5
PC-LC/
PC,Single
mode,G.
652D,
2mm,5m

Patch 1413019 SS-OP- LC/PC SC/PC 10 m 30 mm

Cord,LC/ 6 LC-SC-
PC,SC/ S-10
PC,Single
-mode,
10m,G.
652D,
2mm

Patch 1413019 SS-OP- LC/PC FC/PC 10 m 30 mm

Cord,LC/ 7 LC-FC-
PC,FC/ S-10
PC,Single
-mode,
10m,G.
652D,
2mm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 523

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descripti Part Model Connect Connect Cable Bend

on Number or X1 or X2 length radius

Patch 1413019 SS-OP-D- LC/PC LC/PC 10 m 30 mm

Cord,LC/ 9 LC-S-10
PC,LC/
PC,Single
-mode,
10m,G.
652D,
2mm

Patch 1413022 SS-OP- LC/PC FC/PC 10 m 30 mm

Cord,LC/ 1 LC-FC-
PC,FC/ M-10
PC,Multi-
mode,
10m,A1b,
2mm

Patch 1413022 SS-OP-D- LC/PC LC/PC 10 m 30 mm

Cord,LC/ 2 LC-M-10
PC,LC/
PC,Multi-
mode,
10m,A1B,
2mm

Patch 1413022 SS-OP- LC/PC SC/PC 10 m 30 mm

Cord,LC/ 3 LC-SC-
PC,SC/ M-10
PC,Multi-
mode,
10m,A1b,
2mm

Optical 1413024 QW1P0FI LC/PC LC/PC - -

adapter- 8 BER06
LC/PC-
LC/PC-
Blue-
Shell:Plas
tic-
Sleeve:Zir
conia-
Square

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 524

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descripti Part Model Connect Connect Cable Bend

on Number or X1 or X2 length radius

Patch 1413025 SS-OP-D- LC/PC LC/PC 20 m 30 mm

Cord,LC/ 1 LC-S-20
PC,LC/
PC,Single
-mode,
20m,G.
652D,
2mm

Patch 1413027 SS-OP- LC/PC SC/PC 30 m 30 mm

Cord,LC/ 5 LC-SC-
PC,SC/ M-30
PC,Multi-
mode,
30m,A1b,
2mm

Patch 1413027 SS-OP- LC/PC SC/PC 30 m 30 mm

Cord,LC/ 6 LC-SC-
PC,SC/ S-30
PC,Single
-mode,
30m,G.
652D,
2mm

Patch 1413027 SS-OP- LC/PC SC/PC 20 m 30 mm

Cord,LC/ 9 LC-SC-
PC,SC/ M-20
PC,Multi-
mode,
20m,A1b,
2mm

Patch 1413028 SS-OP- LC/PC SC/PC 20 m 30 mm

Cord,LC/ 0 LC-SC-
PC,SC/ S-20
PC,Single
-mode,
20m,G.
652D,
2mm

Patch 1413029 SS-OP-D- LC/PC LC/PC 20 m 30 mm

Cord,LC/ 5 LC-M-20
PC,LC/
PC,Multi-
mode,
20m,A1b,
2mm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 525

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descripti Part Model Connect Connect Cable Bend

on Number or X1 or X2 length radius

Patch 1413029 SS-OP-D- LC/PC LC/PC 5m 30 mm

Cord,LC/ 6 LC-M-5
PC,LC/
PC,Multi-
mode,
5m,A1b,
2mm

Patch 1413031 SS-OP- LC/PC SC/PC 50 m 30 mm

Cord,LC/ 1 LC-SC-
PC,SC/ M-50
PC,Multi-
mode,
50m,A1b,
2mm

Patch 1413031 SS-OP- LC/PC SC/PC 50 m 30 mm

Cord,LC/ 2 LC-SC-
PC,SC/ S-50
PC,Single
-mode,
50m,G.
652D,
2mm

Patch 1413036 SS-OP-D- LC/PC LC/PC 6m 30 mm

Cord,LC/ 0 LC-S-6
PC,LC/
PC,Single
-mode,
6m,G.
652D,
2mm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 526

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descripti Part Model Connect Connect Cable Bend

on Number or X1 or X2 length radius

Optical 1413082 F00MPM MPO/PC MPO/PC 2m 18 mm

Cable 3 P01
Parts,MP
O/
PC,MPO/
PC,MULTI
-MODE,
2m,8
CORES,
0m/
0m,GJFH
-8A1A.
2(OM3),
3.5MM,L
SZH,
43MM
SHORT
MPO,BE
NDING
INSENSIT
IVE

Optical 1413082 FMMM0 MPO/PC MPO/PC 30 m 17.5 mm

Cable 3-002 3001
Parts,MP
O/
PC,MPO/
PC,Multi
mode(O
M3,Bendi
ng
Insensitiv
e),30m,8
Cores,
0m/
0m,GJFH
8A1a,
3.5mm,L
SZH,
42mm
Short
MPO,Ind
oor

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 527

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descripti Part Model Connect Connect Cable Bend

on Number or X1 or X2 length radius

Optical 1413082 FMMM1 MPO/PC MPO/PC 100 m 17.5 mm

Cable 3-003 0001
Parts,MP
O/
PC,MPO/
PC,Multi
mode(O
M3,Bendi
ng
Insensitiv
e),100m,
8 Cores,
0m/
0m,GJFH
8A1a,
3.5mm,L
SZH,
42mm
Short
MPO,Ind
oor

Optical 1413092 SS-OP-D- MPO/PC MPO/PC 15 m 18 mm

Cable 3 MPO12-
Parts,MP M-15
O/
PC,MPO/
PC,MULTI
-MODE,
15m,8
CORES,
0m/
0m,GJFH
-8A1A.
2(OM3),
3.5MM,L
SZH,
60mm
MPO,Ben
ding
insensitiv
e

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 528

HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview

Descripti Part Model Connect Connect Cable Bend

on Number or X1 or X2 length radius

Optical 1413448 MPO12- MPO/PC MPO/PC 10 m 17.5 mm

Cable 6 MPO12-
Parts,MP M4-10
O/
PC,MPO/
PC,Multi-
mode,
10m,8
cores,GJF
H-8A1a.
3(OM4),
3.5mm,
0mm,LSZ
H,Bendin
g
Insensitiv
e

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 529

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

5 Hardware Installation

This chapter describes hardware installation procedures and precautions.

5.1 Installation Procedure

This section describes the installation procedure of the USG6000E.
procedure and precaution for unpacking and checking the products before
installation has started.
Figure 5-1 shows the USG devices installation procedure.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 530

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-1 Installation flowchart

5.2 Installation Preparation

This section describes the safety precautions that you must observe and the tools
that must be prepared before you install the USG.

5.2.1 Precautions
This section describes the precautions that you must observe before installing the
USG. Misoperation may cause personal injury or damage to the USG.

NOTE

This section describes common precautions related to installation. For more precautions,
see Safety and Regulatory Compliance Information.

Safety Precautions
To ensure your own personal safety and to help protect your device from damage,
observe the safety warnings on device labels and in the operation manual.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 531

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Information marked NOTICE, CAUTION, WARNING, and DANGER in the

operation manual is not exhaustive, but supplements safety precautions.

Local Laws and Regulations

Comply with local laws and regulations while performing operations on the
device. All safety precautions in the operation manual only supplement local
safety regulations.

Basic Installation Requirements

Requirements for Huawei installation and maintenance personnel before they can
perform related operations are as follows:
● Only qualified and trained engineers can install, operate, and maintain
Huawei equipment.
● Only qualified professionals can remove safety facilities and troubleshoot
Huawei equipment.
● Only authorized or certified personnel can replace Huawei components
(including software).
● Installation and maintenance personnel must report all faults and errors that
may cause safety issues to the person in charge.

Personal Safety Warnings

● Do not operate or cable the device during electrical storms.
● To avoid electric shock, do not connect the safety extra-low voltage (SELV)
terminal to the telephone-network voltage (TNV) terminal.
● To avoid possible eye damage, do not look into the optical cable outlet
without eye protection.
● Wear an antistatic suit, ESD gloves, and ESD wrist strap and remove any
jewelry and watches before entering the equipment room to avoid possible
electrical shock or injury.
● In the event of fire, evacuate the equipment room and nearby areas and pull
the fire alarm or call your local emergency number.

Device Security Precautions

● Fix the device on the ground or other secure places, such as against the wall
or on the mounting shelf.
● Do not block the air vent when the device is running.
● Tighten the screws with proper tools when installing the panels.
● Remove all plastic packing materials from the equipment room after the
installation is complete.

5.2.2 Installation Environment Check

Before you install a USG, verify that the installation environment meets
requirements to ensure the normal running and extended life time of the USG.
Table 5-1 lists installation environment check items.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 532

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Table 5-1 Installation environment checklist

Check Item Requirement Compliance

Ventilation and heat Complies with □ Y □ N □ N/A

dissipation requirements in Device
Position.
Stability □ Y □ N □ N/A

Grounding □ Y □ N □ N/A

Temperature Complies with □ Y □ N □ N/A

requirements in
Relative humidity Humidity, Temperature, □ Y □ N □ N/A

Cleanness and Cleanness. □ Y □ N □ N/A

Electrostatic discharging Complies with □ Y □ N □ N/A

requirements in ESD
Requirements.

Surge protection Complies with □ Y □ N □ N/A

requirements in
Lightning Protection
and Grounding.

Power supply facility Complies with □ Y □ N □ N/A

requirements in Power
Supply.

Electromagnetic Complies with □ Y □ N □ N/A

shielding requirements in
Electromagnetic
Protection.

5.2.3 Instruments Required for the Installation

This section describes the instruments and meters for installing the USG.

Table 5-2 lists the required instruments and meters for USG installation.

Table 5-2 Required instruments and meters

Category Instrument/Meter

Measuring and ● Ruler: used to measure length.

lineation ● Marker: used to indicate specific lengths with drawn
instruments lines.

Fastening tools ● Flat-head screwdriver: used to fasten small screws and

bolts.
● Phillips screwdriver: used to fasten small screws and
bolts.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 533

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Category Instrument/Meter

Drilling tools ● Hammer drill: used to drill mounting holes during wall-
mounting.
● Vacuum cleaner: used to remove dust and debris
produced while drilling holes.
● Hammer: used to drive the hollow wall anchors into
mounting holes.

Pliers ● Needle-nose pliers: used to hold small fittings and twist

fine wires in a narrow workplace.
● Diagonal cutting pliers: used to cut insulated sleeves
and tie wraps.

Auxiliary tools ● Knife: used to peel the insulated sleeve from the cable.
● Ladder: used to access overhead cabling.

Special tools ● Wire stripper: used to peel the insulated sleeve of the
communication cable.
● RJ-45 crimping tool: used to crimp RJ-45 cables for
telephony and Ethernet applications.
● Crimping tool: used to crimp the metal sleeve at the
ends of coaxial cables.
● Floating nut mounting bar: used to install floating nuts
to the mounting bars of the cabinet.
● ESD gloves: used to protect the device from being
damaged by static electricity.
● ESD wrist strip: used to protect the device from being
damaged by static electricity.
● Protective gloves: used to shield hands from being
injury by sharp objects.

Meters ● Network cable tester: used to test whether a network

cable is connected and check the connection sequence
in a network cable.
● Optical power meter: used to test the optical power.
● Optical attenuator: used to measure optical
attenuation.
● Multimeter: used to test insulation within the cabinet,
cable connections, and electric performance
specifications of the device, such as the voltage,
current, and resistance.
● Ground resistance tester: used to measure the ground
resistance.
● Configuration terminal (A common PC is also
applicable).

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 534

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

5.3 Installing a Desktop Device

This chapter provides the cabinet-mounting, workbench-mounting, wall-mounting,
and cable connection methods of the USG6510E, USG6510E-POE, USG6530E.

5.3.1 Mounting a Device to a Specified Location

The USG6510E, USG6510E-POE, USG6530E can be mounted in a 19-inch standard
cabinet. When no cabinet is available, install the USG6510E, USG6510E-POE,
USG6530E on a workbench or a wall.

5.3.1.1 Mounting a Device in a Cabinet

The USG6510E, USG6510E-POE, USG6530E can be mounted in a 19-inch standard
cabinet using mounting ears.

Precautions
Before installing the USG, check the following items:
● Before unpacking the carton, ensure that the packing carton is intact and not
damaged or soaked. Stop unpacking if the USG is rusted or soggy. Then,
investigate causes and contact the supplier.
● The cabinet is stable.
● The position for the USG in the cabinet is well arranged.
● Ensure that the USG is 1 U of clearance from any devices above and below
and 150 mm of clearance from any devices on the right or left.
● The device to be installed is staged near the cabinet for convenience.
You can place either end of the USG chassis towards the front door of the cabinet.
In this manual, the front panel of the USG is towards the front door of the
cabinet.

Tools and Accessories

● Phillips screwdriver
● Floating nuts and matching screws
● Floating mounting bar
● Mounting ears and matching screw (purchased separately, BOM numbers:
21240477)
● Holding plate and matching screw (purchased separately, BOM numbers:
21243646)

Procedure
Step 1 Install mounting ears on the chassis.
Use a Phillips screwdriver to fix the mounting ears to both sides of the chassis
with M4 screws, as shown in Figure 5-2.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 535

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-2 Installing the mounting ears on the chassis

NOTE

If the tray installation mode is used, skip this step.

Step 2 Install floating nuts.

Figure 5-3 illustrates the positions of floating nuts.

Figure 5-3 Positions of floating nuts

Use M6 screws to fix the floating nuts at the positions specified in Figure 5-3, as
shown in Figure 5-4.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 536

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-4 Installing floating nuts

Step 3 (Optional) Install the device to a tray. For details, see the installation guide
delivered with the tray.
Step 4 Mount the USG in the cabinet.
1. Lift the USG and move it to the cabinet.
2. Use a Phillips screwdriver to install M6 screws and fix the USG into the
cabinet through mounting ears, as shown in Figure 5-5.

Figure 5-5 Mounting the USG in a cabinet

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 537

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

----End

Follow-up Procedure
Perform the following checks after the installation:
● Ensure that the USG is placed securely inside the cabinet.
● Ensure that the exhaust of the USG is not blocked by other objects.

5.3.1.2 Mounting a Device on a Workbench

If you do not have a cabinet, you can mount the USG6510E, USG6510E-POE,
USG6530E on a workbench.

Precautions
Before unpacking the carton, ensure that the packing carton is intact and not
damaged or soaked. Stop unpacking if the USG is rusted or soggy. Then,
investigate causes and contact the supplier.
The workbench must be:
● Reliably grounded.
● Clean, firm, and securely installed.

Accessories
Four rubber feet

Procedure
Step 1 Fix the rubber feet to the round notches at the bottom of the USG.
NOTE

Install foot pads at the bottom of the USG to ensure smooth contact between the USG and
the workbench and avoid friction between the surface of the USG and the workbench.

Step 2 Place the USG on the workbench.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 538

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-6 Placing the USG with rubber feet on a workbench

----End

Follow-up Procedure
Verify the following after the installation:

● The USG is securely placed on the workbench.

● No object blocks the exhaust of the USG, and there is at least 10 cm of
distance between the USG and surrounding devices.
● There are no heavy objects on the USG.

5.3.1.3 Mounting a Device Against a Wall

When no cabinet is available, you can mount the USG6510E, USG6510E-POE,
USG6530E on a wall. The customer must have expansion screws for wall-
mounting.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 539

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Precautions
Before unpacking the carton, ensure that the packing carton is intact and not
damaged or soaked. Stop unpacking if the USG is rusted or soggy. Then,
investigate causes and contact the supplier.

Tools and Accessories

● Ruler
● Marker
● Hammer drill
● Vacuum cleaner
● Hammer
● Phillips screwdriver
● Mounting ears and matching screw (purchased separately, BOM numbers:
21240477)

Procedure
Step 1 Fix mounting ears to both sides of the panel with ports using M4 screws.

Figure 5-7 Installing the mounting ears on the chassis

Step 2 Determine the locations of four mounting holes on the wall using a ruler and
mark the mounting holes with a marker.
NOTE

● The wall must be a bearing wall. Otherwise, the wall is not suitable for wall-mounting.
● Ensure that the height of mounting holes is proper so that the indicators are easy to
view.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 540

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-8 Spacing between mounting holes

Step 3 Drill holes and install expansion bolts.

NOTICE

Ensure that the expansion bolts are secure and reliable. Otherwise, the tension
after cables are connected may cause the USG6510E, USG6510E-POE, USG6530E
to fall.

1. Use a φ8 drill bit to drill holes in the marked positions.

2. Insert expansion bolts into the holes and screw the nuts to fasten the
expansion bolts.
3. Remove the nut, flat washer, and spring washer.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 541

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-9 Drilling holes and installing expansion bolts

Step 4 Secure the USG on the wall and fasten the flat washers, spring washers, and nuts
in order.
NOTE

The USG supports upward mounting and downward mounting. To prevent water from
entering into ports and causing device damage, you are advised to mount the USG with
ports facing downward.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 542

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-10 Mounting the USG on a wall

----End

Follow-up Procedure
After wall-mounting is complete, verify that:
● The USG is securely fixed on the wall.
● A clearance of 10 cm is maintained around the USG and the air flow is not
blocked.

5.3.2 Connecting a PGND Cable

Connecting the PGND cable of a USG6510E, USG6510E-POE, USG6530E correctly
is a key measure of surge protection and resistance to interference. Before using
the USG6510E, USG6510E-POE, USG6530E, correctly connect the PGND cable.
Otherwise, the USG may be damaged.

Precautions
The USG has been installed inside a cabinet.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 543

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Tools
● Phillips screwdriver
● Multimeter

Procedure
Step 1 Loosen and remove the screw of the ground terminal on the USG rear panel.
Step 2 Connect the OT terminal at one end of the PGND cable to the connection hole of
the USG, with the conducting wire upward, and tighten the M4 screw, as shown in
A of Figure 5-11, and tighten the M4 screw. The tightening torque is 1.4 N·m.

Figure 5-11 Installing the OT terminal

NOTE

The ground cable of the USG6510E, USG6510E-POE, USG6530E must be routed upwards.

Step 3 Connect the M6 end of the PGND cable to the ground terminal of the cabinet,
workbench, or wall. The tightening torque of the M6 screw is 4.8 N·m.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 544

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-12 Connecting a PGND cable

NOTICE

The OT terminal may rotate and result in device damage. Make sure that it is
independent of the adjacent metal mechanical part or other terminals.

----End

Follow-up Procedure
Verify the following after the cabling is complete:
● The PGND cable is securely connected to the ground terminal.
● The electrical resistance between the ground terminal and ground point is less
than 0.1 ohm on a multimeter.

5.3.3 Installing a Micro SD Card

This section describes how to install a micro SD card for the first time to avoid
damages.

Precautions
● Micro SD cards are optional and are not delivered with the device. If required,
purchase the micro SD card (part number: 06010308) from Huawei. The micro

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 545

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

SD card model is SDSDQAE-064G, the capacity is 64 GB, and dimensions (H x

W x D) are 1 mm x 15 mm x 11 mm (0.04 in. x 0.59 in. x 0.43 in.).
● The micro SD card can be installed no matter the device is powered off or the
device is running. The installation methods are the same. In this section, the
micro SD card is installed when the device is powered off.
● To replace the micro SD card when the USG is powered on, you must run the
sd-card offline command in the system view first. After the system displays a
message indicating that the micro SD card is offline, remove the micro SD
card. Otherwise, the micro SD card might be damaged, and the data may be
lost. For details, see Replacing a Micro SD Card (USG6510E, USG6510E-
POE, USG6530E).
● Make sure that you have worn an ESD wrist strap and the strap is well
grounded before you hold the micro SD card. Otherwise, the micro SD card
may be damaged.

Tools
● Phillips screwdriver
● ESD wrist strap

Procedure
Step 1 Determine the slot (the slot with a "micro SD" mark on the rear panel) for
installing the micro SD card.
Step 2 Install the micro SD card and anti-theft board.
NOTE

● Note that the micro SD card must be installed with the face with words upwards.
● Do not use too much force; otherwise the micro SD or micro SD card slot might be
damaged.
1. Insert the micro SD along the guide rail to the micro SD card slot.
2. When you hear a click, the micro SD card is in position.
3. Hook the locating hook on the anti-theft board to the locating hole of the
rear panel and tighten the captive screw on the anti-theft board.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 546

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-13 Installing the micro SD card and anti-theft board

----End

Follow-up Procedure
After the micro SD card is installed, power on the USG and run the display sd-
card information command in any view to check the micro SD card installation
and file system mounting status. If SD Card Physical State is Present and SD
Card File System State is Mounted, the micro SD card is working properly.
● If SD Card Physical State is Absent, re-install the micro SD card and try
again. If SD Card Physical State remains the same, the USG may fail to
identify the micro SD card. You are advised to use another micro SD card.
● If SD Card File System State is Unmounted, the micro SD card format might
not be ext4. You need to run the reset sd-card command in the system view
to format the micro SD card.

5.3.4 Connecting a Console Cable

After connecting a PC to the console port of a USG6510E, USG6510E-POE,
USG6530E with a console cable, you can use the terminal emulation program on
the PC to access the command configuration interface of the USG6510E,
USG6510E-POE, USG6530E.

Precautions
Before connecting a console cable, perform the following operations:
● Check preparations.
A PC is ready, a USG has been installed, and the ports to be connected are
planned.
● Prepare cable labels.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 547

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Before cable connection, labels must be prepared for the cable.

NOTICE

● Make sure that the PC and the USG are connected to the same ground point.
Otherwise, the console port of the USG may be damaged.
● Pay attention to port numbering and make sure that the cable is connected to
the correct port, preventing damage to ports or the device.

Tools
Console cable (prepared by the user)

Procedure
Step 1 Before connecting a console cable, attach temporary labels to both ends of the
cable for identification.

Step 2 Connect the RJ45 connector of the console cable to the console port (RJ45) of the
USG.

Step 3 Connect the DB9 connector of the console cable to the COM port of the
management PC.

Figure 5-14 Connecting a console cable to the USG

Step 4 Remove the temporary labels and attach labels 2 cm away from connectors at
both ends of the console cable.

----End

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 548

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Follow-up Procedure
After the cable connection is complete, verify that:
● The labels at both ends of a cable are correct, clear, neat, and facing the same
direction.
● Cables and connectors are free of damage or breakage and are connected
properly.
For details on the console login, refer to the Configuration Guide.

5.3.5 Connecting an Ethernet Cable

Based on the network plan, you can connect one end of an Ethernet cable to the
Ethernet port of a USG6510E, USG6510E-POE, USG6530E and the other end to the
Ethernet port of the peer device.

Context
Before connecting the Ethernet cable, perform the following operations:
● Check construction conditions.
The peer device has been installed in the equipment room, and the port to
which the Ethernet cable is to be connected has been determined.
● Check the cabling route.
The engineering document should specify the cabling route from the cabinet
to the peer device in the equipment room, and the length of the cable is
calculated based on the cabling path.
● Label the cable.
The cable must be labeled before being connected to the devices.

NOTICE

● Only shielded cables are supported on the USG.

● Before connecting a cable, note the label on the port and make sure that the
cable is inserted into the correct port. Otherwise, the port module or the device
might be damaged.

Procedure
Step 1 If multiple network cables need to be connected, attach temporary labels to both
ends of each cable for identification.
Step 2 Connect one end of an Ethernet cable to the Ethernet port of the USG and the
other end to the Ethernet port of the peer device based on the network plan.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 549

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-15 Connecting an Ethernet cable

Step 3 Lay out the Ethernet cable along a cabinet and route the cable through the cable
hole for the signal cables at the top (overhead cabling) or bottom (underfloor
cabling) of the cabinet.

Step 4 Remove the temporary labels and attach labels (2 cm away from connectors) at
both ends of the Ethernet cable.

----End

Follow-up Procedure
Verify the following after the installation:

● The labels at both ends of the cable are correct, clear, neat, and facing the
same direction.
● The cables and connectors are free of any damage or breakage and are
connected properly and reliably.

5.3.6 Installing Optical Transceivers and Connecting Optical

Fibers
This section describes how to install optical transceivers on the SFP or SFP+ ports
and connect them to the ports of the peer device using optical fibers according to
the network plan.

Context
The USG supports both 1 Gbit/s , 10 Gbit/s, and 40 Gbit/s optical modules. The
optical modules at both ends are the same, including the optical fiber type
(single-mode or multi-mode), optical fiber connector type (LC/PC, SC/PC, FC/PC,
or MPO/PC-MPO/PC), and transmission rate. If different optical modules are used
at the two ends, the communication may fail.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 550

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

NOTICE

Huawei optical modules are recommended. The optical modules from other
vendors may cause faults on the USG due to incompatibility.

CAUTION

Do not look into the optical interface of the optical module or the optical fiber
connector without eye protection.

Before connecting optical fiber cables, read the following precautions:

● Do not overbend optical fibers, and the radius should not be shorter than 40
mm.
● Do not bundle the optical fibers too tight. Otherwise, the transmission
performance of the optical fibers and the communication between devices
might be adversely affected.
Before connecting optical ensure the following:
● The optical module has been installed.

Procedure
Step 1 Insert an optical transceiver into the SFP or SFP+ port of the USG.
Step 2 Remove the dust cap from the optical transceiver.
NOTE

Set aside the dust cap properly for future use. After optical fiber are disconnected for
maintenance, use the dust cap to prevent the optical transceiver from dust.

Step 3 Before connecting an optical fiber, attach temporary labels to both ends of the
optical fiber for identification.
Step 4 Remove protective caps from optical fiber connectors, insert optical fibers into the
optical transceiver, and connect the fiber to the peer device.
NOTE

Ensure that the Tx and Rx ports are correctly connected.

Ensure that the TX and RX ports on one end of the optical fiber cable are
connected to the RX and TX ports (respectively) on the other end.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 551

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-16 Installing optical transceivers and connecting optical fibers

Step 5 Repeat Step 1 to Step 4 to install all optical transceivers and connect all optical
fibers.
----End

Follow-up Procedure
After you power on the USG, check the connection by observing the optical port
indicator. If the indicator is on or blinks, the link is connected or data is being
transmitted. If the indicator is off, the link is disconnected. Possible causes for the
disconnection are as follows:
● The optical fiber is improperly inserted. Pull out the optical fiber and re-insert
it.
● The RX and TX optical ports are inserted reversely. Pull out the optical fibers,
change their position, and re-insert them.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 552

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

● The optical module is damaged or the optical fiber is broken. Replace the
optical module or the optical fiber.

5.3.7 Connecting a Power Adapter

A power adapter can be used to supply power for a USG6510E, USG6510E-POE,
USG6530E. Prepare an AC power cable to connect the power connector and the
power source of the equipment room.

Context
Before connecting a power connector, ensure that the power source of the
equipment room meets the input requirements of the USG power module.

Procedure
Step 1 Ensure that the PGND cable is properly grounded.
Step 2 Insert a cable-retention clip into the jack next to the power socket.
Step 3 Connect a power adapter.
1. Plug the C7 plug of the AC power cable into the C14 socket of the power
adapter.
2. Insert the tuning fork plug connector of the power adapter into the power
socket on the USG rear panel and adjust the cable-retention clip to an
appropriate position.
3. Use a cable-retention clip to bundle the cable of the power adapter and
adjust the cable-retention clip to fasten the cable.
4. Plug the other end of the AC power cable to the AC power socket or the
output of the AC power supply device.
NOTE

The USG does not have any power switch. The power supply switch determines the
power-on and power-off of the USG.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 553

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-17 Connecting a power adapter to the (USG6510E, USG6530E)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 554

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-18 Connecting a power adapter to the (USG6510E-POE)

----End

Follow-up Procedure
Verify the following after the connection is complete:
● The power cable is firmly connected to the power supply socket.
● If multiple USGs are deployed, the power cables of each USG are correctly
labeled for distinction.

5.3.8 Powering On or Off the USG6510E, USG6510E-POE,

USG6530E
This section describes how to power on or off the USG6510E, USG6510E-POE,
USG6530E. To ensure the normal start and security of the USG6510E, USG6510E-
POE, USG6530E, strictly follow the operation guide to power on or off the
USG6510E, USG6510E-POE, USG6530E.

Context
Before you power on the USG, ensure that:
● The power cable and PGND cable are properly connected.
● The power switch in the equipment room is easy to locate so that you can
power off devices in the case of accidents.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 555

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Procedure
● Power on the USG.
The USG starts after the switch of the power supply device is turned on.
You can identify the USG status based on indicators on the front panel.
Indicators shown in Figure 5-19 indicate that the USG is running normally.

Figure 5-19 Indicators when the USG runs normally

● Power off the USG.

NOTICE

Before powering off the USG, ensure that configuration data is saved.
Otherwise, the configuration data may be lost.

If the USG will be administratively shut down for a long time, turn off the
power switch. After powering off the USG, set it aside properly according to
storage requirements.
----End

Follow-up Procedure
After the USG is powered on, you can log in to the configuration page for
management and maintenance. For details, refer to the Configuration Guide.

5.4 Installing a 420 mm Deep Device

This chapter provides the cabinet-mounting, workbench-mounting, and cable
connection methods of the USG6515E, USG6525E, USG6550E, USG6555E,
USG6560E, USG6565E, USG6575E-B, USG6580E, USG6585E, USG6605E-B,
USG6610E, USG6615E, USG6620E, USG6625E, USG6630E, USG6635E, USG6650E,
USG6655E series.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 556

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

5.4.1 Mounting a Device to a Specified Location

The USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E can be
mounted in a 19-inch standard cabinet. When no cabinet is available, you can
mount the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E on a
workbench.

5.4.1.1 Mounting a Device in a Cabinet

Install the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E to the
cabinet through the expandable rear mounting ears or adjustable guide rails.

Precautions
Before installing the USG, check the following items:
● Before unpacking the carton, ensure that the packing carton is intact and not
damaged or soaked. Stop unpacking if the USG is rusted or soggy. Then,
investigate causes and contact the supplier.
● The cabinet is stable.
● Before installing the expandable rear mounting ears or adjustable guide rails
on the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E, adjust
the distance between the front and rear angle gauges (rack mounting rails/
vertical columns) to satisfy the installation requirements. The specific scope of
application is as follows:

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 557

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Table 5-3 Expandable rear mounting ears and adjustable guide rails
Distance Between Expandable Rear Mounting Ears and Adjustable
the Front and Rear Guide Rails
Mounting Bars and
Cabinet Type

Expandable rear
mounting ears (BOM
number: 21240492)
● Distance between
the front and rear
mounting bars:
310 mm to 538
mm
● Cabinet depth:
600 mm to 800
mm

Expandable rear
mounting ears (BOM
number: 21240537)
● Distance between
the front and rear
mounting bars:
638 mm to 835
mm
● Cabinet depth:
1000 mm to 1200
mm

Adjustable guide
rails (BOM number:
21242247)
● Distance between
the front and rear
mounting bars:
370 mm to 585
mm
● Cabinet depth:
600 mm to 800
mm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 558

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Distance Between Expandable Rear Mounting Ears and Adjustable

the Front and Rear Guide Rails
Mounting Bars and
Cabinet Type

Adjustable guide
rails (BOM number:
21242246)
● Distance between
the front and rear
mounting bars:
500 mm to 850
mm
● Cabinet depth:
1000 mm to 1200
mm

● The position for the USG in the cabinet is well arranged. Ensure that the USG
is 1 U of clearance from any devices above and below and 150 mm of
clearance from any devices on the right or left.
● The USG to be installed is staged near the cabinet for convenience.
● In the front view, the air flow of the USG is front to rear. If the USG and a
device whose air flow is rear to front must be mounted in the same cabinet,
maintain certain spacing between them to prevent hot air recirculation.

You can place either end of the USG chassis towards the front door of the cabinet.
In this manual, the front panel of the USG is towards the front door of the
cabinet.

NOTE

The method of installing expandable rear mounting ears (BOM number: 21240492) is the
same as that of installing expandable rear mounting ears (BOM number: 21240537). The
following uses the expandable rear mounting ears (BOM number: 21240492) as examples.

Tools and Accessories

● Phillips screwdriver
● Floating nuts and matching screws
● Floating mounting bar
● Front mounting ears and corresponding screws
● Expandable rear mounting ears and corresponding screws (purchased
separately, BOM numbers: 21240492 and 21240537)
● Adjustable guide rails and matching screws (purchased separately, BOM
numbers: 21242247 and 21242246)

Procedure
Step 1 Install mounting ears on the chassis.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 559

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Use a Phillips screwdriver to fix the mounting ears to both sides of the chassis
with M4 screws. The maximum torque is 1.4 N m. For details about how to install
the mounting ears, see the installation methods in Table 5-4.

NOTE

● The front mounting brackets, rear mounting brackets, and rear mounting bracket guide rails
must be installed on both sides of the USG. Table 5-4 shows the installation on one side.
Install them on the other side in the same way.
● To ensure sufficient cabling space, reserve at least 130 mm of vertical distance from the
USG's port side to the interior side of the cabinet door.
● After the installation is complete, the rear mounting brackets and rear mounting bracket
guide rails will not block cables routed from the ports or touch the cabinet door.

Table 5-4 Installation of front and rear mounting ears

Distance Between Installation of Front Mounting Brackets, Rear
Front and Rear Mounting Brackets, and Rear Mounting Bracket
Mounting Rails Guide Rails

310 mm to 351 mm

369 mm to 410 mm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 560

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Distance Between Installation of Front Mounting Brackets, Rear

Front and Rear Mounting Brackets, and Rear Mounting Bracket
Mounting Rails Guide Rails

438 mm to 479 mm

497 mm to 538 mm

638 mm to 696 mm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 561

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Distance Between Installation of Front Mounting Brackets, Rear

Front and Rear Mounting Brackets, and Rear Mounting Bracket
Mounting Rails Guide Rails

697 mm to 835 mm

Step 2 Install floating nuts and cabinet guide rails.

1. Determine the positions for installing the guide rails and floating nuts, as
shown in Figure 5-20.

NOTICE

Install the two guide rails at the same height to ensure that the device is
level.

Figure 5-20 Positions of floating nuts

2. Install the floating nuts that match M6 screws at the positions marked in
Figure 5-20. Figure 5-21 illustrates how to install a floating nut.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 562

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-21 Installing floating nuts

3. Install guide rails in the correct direction. Identify the left and right guide rails,
and the front and rear ends of each guide rail.
Fix expandable rear mounting ears and adjustable guide rails (at the positions
marked in Figure 5-20) to the left and right of the cabinet with M6 screws, as
shown in Figure 5-22.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 563

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-22 Installing guide rails

4. (Optional) Install adjustable guide rails (BOM numbers: 21242247 and

21242246). For details, see the installation guide delivered with the adjustable
guide rails.

Step 3 Mount the USG in the cabinet.

1. Hold the bottom of the USG with both hands and move the USG into the
cabinet. Align the rear mounting ears with the rear mounting ear guide rails
and slowly slide the USG along the guide rails.
2. Place the device on the guide rails, slowly push it into the cabinet, and then
tighten screws with the Phillips screwdriver to secure the device.Insert the
device into the rear mounting ear guide rails and slide it into the cabinet.
3. Use M6 screws to fix the mounting ears of the USG to the mounting rack, as
shown in Figure 5-23.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 564

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-23 Mounting the USG in a cabinet

----End

Follow-up Procedure
Perform the following checks after the installation:

● Ensure that the USG is placed securely inside the cabinet.

● Ensure that the exhaust of the USG is not blocked by other objects.

5.4.1.2 Mounting a Device on a Workbench

If you do not have a cabinet, you can mount the USG6515E, USG6525E,
USG6550E, USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E,
USG6585E, USG6605E-B on a workbench.

Precautions
Before unpacking the carton, ensure that the packing carton is intact and not
damaged or soaked. Stop unpacking if the USG is rusted or soggy. Then,
investigate causes and contact the supplier.

The workbench must be:

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 565

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

● Reliably grounded.
● Clean, firm, and securely installed.

Accessories
Four rubber feet

Procedure
Step 1 Fix the rubber feet to the round notches at the bottom of the USG.
NOTE

Install foot pads at the bottom of the USG to ensure smooth contact between the USG and
the workbench and avoid friction between the surface of the USG and the workbench.

Step 2 Place the USG on the workbench.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 566

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-24 Placing the USG with rubber feet on a workbench

----End

Follow-up Procedure
Verify the following after the installation:
● The USG is securely placed on the workbench.
● No object blocks the exhaust of the USG, and there is at least 10 cm of
distance between the USG and surrounding devices.
● There are no heavy objects on the USG.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 567

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

5.4.2 Connecting a PGND Cable

Connecting the PGND cable of a USG correctly is a key measure of surge
protection and resistance to interference. Before using the USG, correctly connect
the PGND cable. Otherwise, the USG may be damaged.

Precautions
The USG has been installed inside a cabinet.

Tools
● Phillips screwdriver
● Multimeter

Procedure
Step 1 Loosen and remove the screw of the ground terminal on the USG rear panel.
Step 2 Connect the OT terminal at one end of the PGND cable to the connection hole of
the USG, with the conducting wire upward, and tighten the M4 screw, as shown in
A of Figure 5-25, and tighten the M4 screw. The tightening torque is 1.4 N·m.

Figure 5-25 Installing the OT terminal

Step 3 Connect the M6 end of the PGND cable to the ground terminal of the cabinet,
workbench, or wall. The tightening torque of the M6 screw is 4.8 N·m.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 568

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-26 Connecting a PGND cable

NOTE

In the dual-OT scenario, connect the ground terminal on the side panel of the USG.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 569

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-27 Connecting the ground terminal in the dual-OT scenario

NOTICE

The OT terminal may rotate and result in device damage. Make sure that it is
independent of the adjacent metal mechanical part or other terminals.

----End

Follow-up Procedure
Verify the following after the cabling is complete:

● The PGND cable is securely connected to the ground terminal.

● The electrical resistance between the ground terminal and ground point is less
than 0.1 ohm on a multimeter.

5.4.3 Installing a Hard Disk

This section describes how to install a hard disk units for the first time to avoid
hard disk damage.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 570

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Precautions
Precautions for the use of hard disks
● Use Huawei hard disks. The system cannot recognize the hard disks provided
by other vendors.
● Wear an ESD wrist strap to protect the USG and hard disks from electrostatic
damage.
● Hold the two side surfaces of a hard disk, do not touch the PCB board or
squeeze the hard disk, and do not vibrate, bump, or stack hard disks.
● For mapping relationships between the USG and hard disks, see Hardware
Overview.

Tool
ESD bag

Installing The Hard Disk (USG6515E, USG6525E, USG6550E, USG6555E,

USG6560E, USG6565E, USG6580E, USG6585E)
Step 1 Remove the baffle plate from the hard disk slot.
Step 2 Hold the handlers of the hard disk and push the hard disk along the guide rails till
the hard disk aligns with the panel of the USG.
Step 3 Press the hard disk handler inwardly to restore the module.

Figure 5-28 Installing the hard disk (USG6515E, USG6525E, USG6550E,

USG6555E, USG6560E, USG6565E, USG6580E, USG6585E)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 571

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Step 4 After the installation is complete, perform the following operations:

NOTE

Operations after the USG power-on must be performed after all installation tasks are
complete.
● Before the USG is powered on, ensure that the hard disk is correctly installed.
● After the USG is powered on, run the display disk information command in
the user view to check whether the Filesystem Status value is Mounted.

----End

Installing The Hard Disk (USG6575E-B, USG6605E-B, USG6610E, USG6615E,

USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E)
Step 1 Remove the filler panel from a hard disk slot.

Figure 5-29 Removing the filler panel from a hard disk slot (USG6575E-B,
USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E, USG6630E,
USG6635E, USG6650E, USG6655E)

Step 2 Pull the ejector lever on the hard disk holder, keep it in pulled-out state, and push
the hard disk holder with two hands along the guide rails of the slot till the front
surface of the hard disk holder touches the USG panel.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 572

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-30 Installing a hard disk (USG6575E-B, USG6605E-B, USG6610E,

USG6615E, USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E)

Step 3 After the ejector lever of the hard disk is fastened to the chassis, close the hard
disk ejector lever.
Step 4 After the installation is complete, perform the following operations:
NOTE

Operations after the USG power-on must be performed after all installation tasks are
complete.
● Before the USG is powered on, ensure that the hard disk is correctly installed.
● After the USG is powered on, run the display disk information command in
the user view to check whether the Filesystem Status value is Mounted.
----End

5.4.4 Connecting a Console Cable

After connecting a PC to the console port of a USG6515E, USG6525E, USG6550E,
USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E, USG6585E,
USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E, USG6630E,
USG6635E, USG6650E, USG6655E with a console cable, you can use the terminal
emulation program on the PC to access the command configuration interface of
the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 573

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Precautions
Before connecting a console cable, perform the following operations:
● Check preparations.
A PC is ready, a USG has been installed, and the ports to be connected are
planned.
● Prepare cable labels.
Before cable connection, labels must be prepared for the cable.

NOTICE

● Make sure that the PC and the USG are connected to the same ground point.
Otherwise, the console port of the USG may be damaged.
● Pay attention to port numbering and make sure that the cable is connected to
the correct port, preventing damage to ports or the device.

Tools
Console cable (prepared by the user)

Procedure
Step 1 Before connecting a console cable, attach temporary labels to both ends of the
cable for identification.
Step 2 Connect the RJ45 connector of the console cable to the console port (RJ45) of the
USG.
Step 3 Connect the DB9 connector of the console cable to the COM port of the
management PC.

Figure 5-31 Connecting a console cable to the USG

Step 4 Remove the temporary labels and attach labels (2 cm away from the connectors)
at both ends of the console cable.
----End

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 574

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Follow-up Procedure
After the cable connection is complete, verify that:

● The labels at both ends of a cable are correct, clear, neat, and facing the same
direction.
● Cables and connectors are free of damage or breakage and are connected
properly.

For details on the console login, refer to the Configuration Guide.

5.4.5 Connecting an Ethernet Cable

Based on the network plan, you can connect one end of an Ethernet cable to the
Ethernet port of a USG6515E, USG6525E, USG6550E, USG6555E, USG6560E,
USG6565E, USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E,
USG6615E, USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E
and the other end to the Ethernet port of the peer device.

Context
Before connecting the Ethernet cable, perform the following operations:
● Check construction conditions.
The peer device has been installed in the equipment room, and the port to
which the Ethernet cable is to be connected has been determined.
● Check the cabling route.
The engineering document should specify the cabling route from the cabinet
to the peer device in the equipment room, and the length of the cable is
calculated based on the cabling path.
● Label the cable.
The cable must be labeled before being connected to the devices.

NOTICE

● Only shielded cables are supported on the USG.

● Before connecting a cable, note the label on the port and make sure that the
cable is inserted into the correct port. Otherwise, the port module or the device
might be damaged.

Procedure
Step 1 If multiple network cables need to be connected, attach temporary labels to both
ends of each cable for identification.

Step 2 Connect one end of an Ethernet cable to the Ethernet port of a USG and the other
end to the Ethernet port of the peer device based on the network plan.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 575

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-32 Connecting an Ethernet cable

Step 3 Lay out the Ethernet cable along a cabinet and route the cable through the cable
hole for the signal cables at the top (overhead cabling) or bottom (underfloor
cabling) of the cabinet.

Step 4 Remove the temporary labels and attach labels (2 cm away from the connectors)
at both ends of the Ethernet cable.

----End

Follow-up Procedure
Verify the following after the installation:

● The labels at both ends of the cable are correct, clear, neat, and facing the
same direction.
● The cables and connectors are free of any damage or breakage and are
connected properly and reliably.

5.4.6 Installing Optical Transceivers and Connecting Optical

Fibers
This section describes how to install optical transceivers on the GE , 10GE, or 40GE
optical ports of the USG and connect them to the ports of the peer device using
optical fibers according to the network plan.

Context
The USG supports both 1 Gbit/s , 10 Gbit/s, and 40 Gbit/s optical modules. The
optical modules at both ends are the same, including the optical fiber type
(single-mode or multi-mode), optical fiber connector type (LC/PC, SC/PC, FC/PC,
or MPO/PC-MPO/PC), and transmission rate. If different optical modules are used
at the two ends, the communication may fail.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 576

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

NOTICE

Huawei optical modules are recommended. The optical modules from other
vendors may cause faults on the USG due to incompatibility.

CAUTION

Do not look into the optical interface of the optical module or the optical fiber
connector without eye protection.

Before connecting optical fiber cables, read the following precautions:

● Do not overbend optical fibers, and the radius should not be shorter than 40
mm.
● Do not bundle the optical fibers too tight. Otherwise, the transmission
performance of the optical fibers and the communication between devices
might be adversely affected.
Before connecting optical ensure the following:
● The optical module has been installed.

Procedure
Step 1 Insert an optical transceiver into the GE , 10GE, or 40GE optical port of the USG.
Step 2 Remove the dust cap from the optical transceiver.
NOTE

Set aside the dust cap properly for future use. After optical fiber are disconnected for
maintenance, use the dust cap to prevent the optical transceiver from dust.

Step 3 Before connecting an optical fiber, attach temporary labels to both ends of the
optical fiber for identification.
Step 4 Remove protective caps from optical fiber connectors, insert optical fibers into the
optical transceiver, and connect the fiber to the peer device.
NOTE

Ensure that the Tx and Rx ports are correctly connected.

Ensure that the TX and RX ports on one end of the optical fiber cable are
connected to the RX and TX ports (respectively) on the other end.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 577

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-33 Installing optical transceivers and connecting optical fibers

Step 5 Repeat Step 1 to Step 4 to install all optical transceivers and connect all optical
fibers.

----End

Follow-up Procedure
After you power on the USG, check the connection by observing the optical port
indicator. If the indicator is on or blinks, the link is connected or data is being

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 578

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

transmitted. If the indicator is off, the link is disconnected. Possible causes for the
disconnection are as follows:
● The optical fiber is improperly inserted. Pull out the optical fiber and re-insert
it.
● The RX and TX optical ports are inserted reversely. Pull out the optical fibers,
change their position, and re-insert them.
● The optical module is damaged or the optical fiber is broken. Replace the
optical module or the optical fiber.

5.4.7 Connecting Power Cables

Follow the operation guide to connect power cables from the power module of
the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E to the output
of the power supply device.

5.4.7.1 Connecting AC Power Cables

By default, the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E,
USG6565E, USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E,
USG6615E, USG6620E, USG6625E comes with one AC power module. However,
two AC power modules are supported. The USG6630E, USG6635E, USG6650E,
USG6655E comes with two AC power module. Each AC power module requires an
AC power cable. When two AC power modules are used, connect power cables to
both AC power modules.

Context
Before connecting the power cables, ensure that the AC power supply in the
equipment room meets the input requirements of the USG.

DANGER

Do not connect or disconnect the power cables when the USG is powered on.

Procedure
Step 1 Ensure that the PGND cable is adequately grounded.
Step 2 Connect AC power cables to AC power modules.
NOTE

When two power modules are used, connect them to different power sources to improve
availability.
1. Plug one end of the C13 power cable to the power socket of the USG power
module and adjust the cable-retention clip to an appropriate position.
2. Bundle the AC power cable using a cable-retention clip and adjust the cable-
retention clip to fasten the AC power cable.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 579

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

3. Plug the other end of the power cable to the AC power socket or the output
of the AC power supply device.

Figure 5-34 Connecting AC power cables (USG6515E, USG6525E, USG6550E,

USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E, USG6585E,
USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 580

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-35 Connecting AC power cables (USG6630E, USG6635E, USG6650E,

USG6655E)

----End

Follow-up Procedure
Verify the following after the connection is complete:
● The power cable is firmly connected to the power supply socket.
● If multiple USGs are deployed, the power cables of each USG are correctly
labeled for distinction.

5.4.7.2 Connecting DC Power Cables

The USG6630E, USG6635E come with two DC power module. Each DC power
module requires an NEG power cable and an RTN power cable. Connect power
cables to both DC power modules.

Context
Before connecting power cables, ensure that the DC power supply in the
equipment room meets the input requirements of the USG.

DANGER

Do not connect or disconnect the power cables when the USG is powered on.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 581

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Procedure
Step 1 Ensure that the PGND cable is adequately grounded.

Step 2 Connect power cables for the two DC power modules one after the other.

NOTICE

● Note the labels on the DC power cables to avoid misoperations.

● To improve availability, connect two power modules to different power sources.

1. Plug the connector end of the DC power cable to the DC power module.
2. Connect the other end of the DC power cable to the output of the power
supply device in the equipment room.

Figure 5-36 Connecting DC power cables

----End

Follow-up Procedure
Verify the following after the connection is complete:

● The power cables are correctly and firmly connected to the power supply
device.
● If multiple USGs are deployed, the power cables of each USG are correctly
labeled for distinction.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 582

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

5.4.8 Powering On or Off the USG6515E, USG6525E,

USG6550E, USG6555E, USG6560E, USG6565E, USG6575E-B,
USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E,
USG6655E
This section describes how to power on or off the USG6515E, USG6525E,
USG6550E, USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E,
USG6585E, USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E,
USG6630E, USG6635E, USG6650E, USG6655E. To ensure the normal start and
security of the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E,
USG6565E, USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E,
USG6615E, USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E,
strictly follow the operation guide to power on or off the USG6515E, USG6525E,
USG6550E, USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E,
USG6585E, USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E,
USG6630E, USG6635E, USG6650E, USG6655E.

Context
Before you power on the USG, ensure that:
● The power cable and PGND cable are properly connected.
● The power switch in the equipment room is easy to locate so that you can
power off devices in the case of accidents.

Procedure
● Power on the USG.
Turn on the switch of the power supply device. The USG starts.
You can identify the USG status based on indicators on the front and rear
panels. Indicators shown in Figure 5-37 indicate that the USG runs normally.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 583

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-37 Indicators when the USG6515E, USG6525E, USG6550E,

USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E, USG6585E,
USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E, USG6630E,
USG6635E, USG6650E, USG6655E (AC model) runs normally

Figure 5-38 Indicators when the USG (DC model) runs normally

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 584

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

● Power off the USG.

NOTICE

Before powering off the USG, ensure that configuration data is saved.
Otherwise, the configuration data may be lost.

If the USG will be administratively shut down for a long time, turn off the
power switch. After powering off the USG, set it aside properly according to
storage requirements.

CAUTION

If the USG has hard disks, do not power off the USG by removing the power
cable or switching off the power supply to prevent data loss and hard disk
damage. You must run the disk offline command in the system view first and
wait for about 30 seconds. After the system prompts you with a message
indicating that hard disks have stopped, turn off the power switch of the USG.

----End

Follow-up Procedure
After the USG is powered on, you can log in to the configuration page for
management and maintenance. For details, refer to the Configuration Guide.

5.5 Installing a 600 mm Deep Device

This chapter provides the cabinet-mounting, workbench-mounting, and cable
connection methods of the USG6680E, USG6712E, USG6716E series.

5.5.1 Mounting a Device in a Cabinet

Install the USG6680E, USG6712E, USG6716E to the 19-inch standard cabinet
through the expandable rear mounting ears.

Precautions
Before installing the USG, check the following items:
● Before unpacking the carton, ensure that the packing carton is intact and not
damaged or soaked. Stop unpacking if the USG is rusted or soggy. Then,
investigate causes and contact the supplier.
● The cabinet is stable.
● Before installing the expandable rear mounting ears on the USG6680E,
USG6712E, USG6716E, adjust the distance between the front and rear angle
gauges (rack mounting rails/vertical columns) to satisfy the installation
requirements. The specific scope of application is as follows:

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 585

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Table 5-5 Expandable rear mounting ears and adjustable guide rails
Distance Between Expandable Rear Mounting Ears and Adjustable
the Front and Rear Guide Rails
Mounting Bars and
Cabinet Type

Expandable rear
mounting ears (BOM
number: 21240492)
● Distance between
the front and rear
mounting bars:
310 mm to 538
mm
● Cabinet depth:
800 mm

Expandable rear
mounting ears (BOM
number: 21240538)
● Distance between
the front and rear
mounting bars:
493 mm to 815
mm
● Cabinet depth:
1000 mm to 1200
mm

Adjustable guide
rails (BOM number:
21242247)
● Distance between
the front and rear
mounting bars:
370 mm to 585
mm
● Cabinet depth:
800 mm

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 586

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Distance Between Expandable Rear Mounting Ears and Adjustable

the Front and Rear Guide Rails
Mounting Bars and
Cabinet Type

Adjustable guide
rails (BOM number:
21242246)
● Distance between
the front and rear
mounting bars:
500 mm to 850
mm
● Cabinet depth:
1000 mm to 1200
mm

● The position for the USG in the cabinet is well arranged. Ensure that the USG
is 1 U of clearance from any devices above and below and 150 mm of
clearance from any devices on the right or left.
● The USG to be installed is staged near the cabinet for convenience.
● In the front view, the air flow of the USG is front to rear. If the USG and a
device whose air flow is rear to front must be mounted in the same cabinet,
maintain certain spacing between them to prevent hot air recirculation.

You can place either end of the USG chassis towards the front door of the cabinet.
In this manual, the front panel of the USG is towards the front door of the
cabinet.

NOTE

The method of installing expandable rear mounting ears (BOM number: 21240492) is the
same as that of installing expandable rear mounting ears (BOM number: 21240538). The
following uses the expandable rear mounting ears (BOM number: 21240492) as examples.

Tools and Accessories

● Phillips screwdriver
● Floating nuts and matching screws
● Floating mounting bar
● Front mounting ears and corresponding screws
● Expandable rear mounting ears and corresponding screws (purchased
separately, BOM numbers: 21240492 and 21240538)
● Adjustable guide rails and matching screws (purchased separately, BOM
numbers: 21242247 and 21242246)

Procedure
Step 1 Install mounting ears on the chassis.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 587

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Use a Phillips screwdriver to fix the mounting ears to both sides of the chassis
with M4 screws. For details about how to install the mounting ears, see the
installation methods in Figure 5-39.

Figure 5-39 Installation of front and rear mounting ears

Step 2 Install floating nuts and cabinet guide rails.

1. Determine the positions for installing the guide rails and floating nuts, as
shown in Figure 5-40.

NOTICE

Install the two guide rails at the same height to ensure that the device is
level.

Figure 5-40 Positions of floating nuts

2. Install the floating nuts that match M6 screws at the positions marked in
Figure 5-40. Figure 5-41 illustrates how to install a floating nut.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 588

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-41 Installing floating nuts

3. Install guide rails in the correct direction. Identify the left and right guide rails,
and the front and rear ends of each guide rail.
Fix expandable rear mounting ears and adjustable guide rails (at the positions
marked in Figure 5-40) to the left and right of the cabinet with M6 screws, as
shown in Figure 5-42.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 589

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-42 Installing guide rails

4. (Optional) Install adjustable guide rails (BOM numbers: 21242247 and

21242246). For details, see the installation guide delivered with the adjustable
guide rails.
Step 3 Mount the USG in the cabinet.
1. Hold the bottom of the USG with both hands and move the USG into the
cabinet. Align the rear mounting ears with the rear mounting ear guide rails
and slowly slide the USG along the guide rails.
2. Use M6 screws to fix the mounting ears of the USG to the mounting rack, as
shown in Figure 5-43.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 590

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-43 Mounting the USG in a cabinet

----End

Follow-up Procedure
Perform the following checks after the installation:

● Ensure that the USG is placed securely inside the cabinet.

● Ensure that the exhaust of the USG is not blocked by other objects.

5.5.2 Connecting a PGND Cable

Connecting the PGND cable of a USG6680E, USG6712E, USG6716E correctly is a
key measure of surge protection and resistance to interference. Before using the
USG6680E, USG6712E, USG6716E, correctly connect the PGND cable. Otherwise,
the USG may be damaged.

Precautions
The USG has been installed inside a cabinet.

Tools
● Phillips screwdriver

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 591

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

● Multimeter

Procedure
Step 1 Loosen and remove the screw of the ground terminal on the lower right of the
USG rear panel.
Step 2 Connect the OT terminal at one end of the PGND cable to the connection hole of
the USG, with the conducting wire upward, as shown in A of Figure 5-44, and
tighten the M4 screw. The tightening torque is 1.4 N·m.

Figure 5-44 Installing the OT terminal

Step 3 Connect the M6 end of the PGND cable to the ground terminal of the cabinet,
workbench, or wall. The tightening torque of the M6 screw is 4.8 N·m.

Figure 5-45 Connecting a PGND cable

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 592

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

NOTE

In the dual-OT scenario, connect the ground terminal on the side panel of the USG.

Figure 5-46 Connecting the ground terminal in the dual-OT scenario

NOTICE

The OT terminal may rotate and result in device damage. Make sure that it is
independent of the adjacent metal mechanical part or other terminals.

----End

Follow-up Procedure
Verify the following after the cabling is complete:

● The PGND cable is securely connected to the ground terminal.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 593

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

● The electrical resistance between the ground terminal and ground point is less
than 0.1 ohm on a multimeter.

5.5.3 Installing a Hard Disk

This section describes how to install a hard disk units for the first time to avoid
hard disk damage.

Precautions
Precautions for the use of hard disks
● Use Huawei hard disks. The system cannot recognize the hard disks provided
by other vendors.
● Wear an ESD wrist strap to protect the USG and hard disks from electrostatic
damage.
● Hold the two side surfaces of a hard disk, do not touch the PCB board or
squeeze the hard disk, and do not vibrate, bump, or stack hard disks.
● For mapping relationships between the USG and hard disks, see Hardware
Overview.

Tool
ESD bag

Procedure
Step 1 Remove the filler panel from a hard disk slot.

Figure 5-47 Removing the filler panel from a hard disk slot

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 594

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Step 2 Pull the ejector lever on the hard disk holder, keep it in pulled-out state, and push
the hard disk holder with two hands along the guide rails of the slot till the front
surface of the hard disk holder touches the USG panel.

Figure 5-48 Installing a hard disk

Step 3 After the ejector lever of the hard disk is fastened to the chassis, close the hard
disk ejector lever.

Step 4 After the installation is complete, perform the following operations:

NOTE

Operations after the USG power-on must be performed after all installation tasks are
complete.
● Before the USG is powered on, ensure that the hard disk is correctly installed.
● After the USG is powered on, run the display disk information command in
the user view to check whether the Filesystem Status value is Mounted.

----End

5.5.4 Connecting a Console Cable

After connecting a PC to the console port of a USG6680E, USG6712E, USG6716E
with a console cable, you can use the terminal emulation program on the PC to
access the command configuration interface of the USG6680E, USG6712E,
USG6716E.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 595

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Precautions
Before connecting a console cable, perform the following operations:
● Check preparations.
A PC is ready, a USG has been installed, and the ports to be connected are
planned.
● Prepare cable labels.
Before cable connection, labels must be prepared for the cable.

NOTICE

● Make sure that the PC and the USG are connected to the same ground point.
Otherwise, the console port of the USG may be damaged.
● Pay attention to port numbering and make sure that the cable is connected to
the correct port, preventing damage to ports or the device.

Tools
Console cable (prepared by the user)

Procedure
Step 1 Before connecting a console cable, attach temporary labels to both ends of the
cable for identification.

Step 2 Connect the RJ45 connector of the console cable to the console port (RJ45) of the
USG.

Step 3 Connect the DB9 connector of the console cable to the COM port of the
management PC.

Figure 5-49 Connecting a console cable to the USG

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 596

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Step 4 Remove the temporary labels and attach labels (2 cm away from the connectors)
at both ends of the console cable.

----End

Follow-up Procedure
After the cable connection is complete, verify that:

● The labels at both ends of a cable are correct, clear, neat, and facing the same
direction.
● Cables and connectors are free of damage or breakage and are connected
properly.

For details on the console login, refer to the Configuration Guide.

5.5.5 Installing Optical Transceivers and Connecting Optical

Fibers
This section describes how to install optical transceivers on the 10GE, 40GE, 100GE
optical ports of the USG and connect them to the ports of the peer device using
optical fibers according to the network plan.

Context
The USG supports 1 Gbit/s, 10 Gbit/s, 40 Gbit/s, 100 Gbit/s optical modules. The
optical modules at both ends are the same, including the optical fiber type
(single-mode or multi-mode), optical fiber connector type (LC/PC, SC/PC, FC/PC,
or MPO/PC-MPO/PC), and transmission rate. If different optical modules are used
at the two ends, the communication may fail.

NOTICE

Huawei optical modules are recommended. The optical modules from other
vendors may cause faults on the USG due to incompatibility.

CAUTION

Do not look into the optical interface of the optical module or the optical fiber
connector without eye protection.

Before connecting optical fiber cables, read the following precautions:

● Do not overbend optical fibers, and the radius should not be shorter than 40
mm.
● Do not bundle the optical fibers too tight. Otherwise, the transmission
performance of the optical fibers and the communication between devices
might be adversely affected.

Before connecting optical ensure the following:

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 597

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

● The optical module has been installed.

Procedure
Step 1 Insert an optical transceiver into the 10GE, or 40GE, or 100GE optical port of the
USG.
Step 2 Remove the dust cap from the optical transceiver.
NOTE

Set aside the dust cap properly for future use. After optical fiber are disconnected for
maintenance, use the dust cap to prevent the optical transceiver from dust.

Step 3 Before connecting an optical fiber, attach temporary labels to both ends of the
optical fiber for identification.
Step 4 Remove protective caps from optical fiber connectors, insert optical fibers into the
optical transceiver, and connect the fiber to the peer device.
NOTE

Ensure that the Tx and Rx ports are correctly connected.

Ensure that the TX and RX ports on one end of the optical fiber cable are
connected to the RX and TX ports (respectively) on the other end.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 598

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-50 Installing optical transceivers and connecting optical fibers

Step 5 Repeat Step 1 to Step 4 to install all optical transceivers and connect all optical
fibers.

----End

Follow-up Procedure
After you power on the USG, check the connection by observing the optical port
indicator. If the indicator is on or blinks, the link is connected or data is being
transmitted. If the indicator is off, the link is disconnected. Possible causes for the
disconnection are as follows:

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 599

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

● The optical fiber is improperly inserted. Pull out the optical fiber and re-insert
it.
● The RX and TX optical ports are inserted reversely. Pull out the optical fibers,
change their position, and re-insert them.
● The optical module is damaged or the optical fiber is broken. Replace the
optical module or the optical fiber.

5.5.6 Connecting AC Power Cables

The USG6680E, USG6712E, USG6716E comes with two AC power module. Each AC
power module requires an AC power cable. When two AC power modules are
used, connect power cables to both AC power modules.

Context
Before connecting the power cables, ensure that the AC power supply in the
equipment room meets the input requirements of the USG.

DANGER

Do not connect or disconnect the power cables when the USG is powered on.

Procedure
Step 1 Ensure that the PGND cable is adequately grounded.
Step 2 Connect AC power cables to AC power modules.
NOTE

When two power modules are used, connect them to different power sources to improve
availability.
1. Plug one end of the C13 power cable to the power socket of the USG power
module and adjust the cable-retention clip to an appropriate position.
2. Use a velcro strap to bundle the power cable onto the handle of the power
module.
3. Connect the other end of the power cable to the external power supply
system.
– If the external power supply is AC, plug the other end of the power cable
to the AC power socket or the output of the AC power supply device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 600

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Figure 5-51 Connecting AC power cables

– If a 240 V high-voltage DC PDU is used, directly connect the straight male

connector to the PDU.
– If a 240 V high-voltage DC power distribution box is used, make OT or
cord end terminals for the cable. Cut the straight male connector off and
crimp OT or cord end terminals on the bare wires. Connect the brown
wire to a negative terminal on the DC power distribution box, the blue
wire to a positive terminal, and the yellow-green wire to a protection
ground. If the switch fails to be powered on after you connect the power
cable, swap the wires on the positive and negative terminals.

----End

Follow-up Procedure
Verify the following after the connection is complete:
● The power cable is firmly connected to the power supply socket.
● If multiple USGs are deployed, the power cables of each USG are correctly
labeled for distinction.

5.5.7 Powering On or Off the USG6680E, USG6712E, USG6716E

This section describes how to power on or off the USG6680E, USG6712E,
USG6716E. To ensure the normal start and security of the USG6680E, USG6712E,
USG6716E, strictly follow the operation guide to power on or off the USG6680E,
USG6712E, USG6716E.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 601

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

Context
Before you power on the USG, ensure that:
● The power cable and PGND cable are properly connected.
● The power switch in the equipment room is easy to locate so that you can
power off devices in the case of accidents.

Procedure
● Power on the USG.

Turn on the switch of the power supply device. The USG starts.

You can identify the USG status based on indicators on the front and rear
panels. Indicators shown in USGFigure 5-52 indicate that the USG runs
normally.

Figure 5-52 Indicators when the USG runs normally

● Power off the USG.

NOTICE

Before powering off the USG, ensure that configuration data is saved.
Otherwise, the configuration data may be lost.

If the USG will be administratively shut down for a long time, turn off the
power switch. After powering off the USG, set it aside properly according to
storage requirements.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 602

HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation

CAUTION

If the USG has hard disks, do not power off the USG by removing the power
cable or switching off the power supply to prevent data loss and hard disk
damage. You must run the disk offline command in the system view first and
wait for about 30 seconds. After the system prompts you with a message
indicating that hard disks have stopped, turn off the power switch of the USG.

----End

Follow-up Procedure
After the USG is powered on, you can log in to the configuration page for
management and maintenance. For details, refer to the Configuration Guide.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 603

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

6 Maintaining the Hardware

The hard disks, power modules, and fan modules of the USG6000E are
replaceable. You can replace them as instructed.

6.1 Replacing the Hard Disk

This section describes how to replace the hard disk as well as the precautions.

Precautions
Precautions for using the hard disks
● Use hard disks purchased from Huawei. Otherwise, the system may not
identify them.
● Powering off the USG interrupts services. Install or replace the hard disks
during off-peak hours.
● Wear the ESD wrist strap while working on the USG to avoid possible
damages to the USG and hard disks.
● While holding a hard disk, do not touch the PCB board or squeeze the disk.
Carry only one hard disk at a time. Do not vibrate, crash, or pile multiple hard
disks up.
● Put the hard disks inside ESD bags when they are not used.
● For mapping relationships between the USG and hard disks, see Hardware
Overview.

Tools
ESD bag

Replacing the Hard Disk (USG6515E, USG6525E, USG6550E, USG6555E,

USG6560E, USG6565E, USG6580E, USG6585E)
If a hard disk is faulty (for example, a hard disk failure log is generated on the
USG), you can replace the hard disk. The hard disk can be replaced no matter
when the USG is powered on or off. If the USG is powered off, skip Step 1 and do

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 604

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

not run the disk offline command. The following procedure guides you through
hard disk replacement while the USG is powered on:

Step 1 Ensure that all configurations are saved.

Step 2 Run the disk offline command in the system view. Wait about 30 seconds until
the system indicates that the hard disk stops working and then remove the hard
disk to be replaced.
NOTE

If you remove and insert a hard disk without running the disk offline command first, the
hard disk may be damaged, data in the hard disk may be lost, or the system may stop
responding to services.
1. Use the handler to pull the hard disk out of the slot.
2. Put the replaced hard disk into an ESD bag.

Figure 6-1 Removing the hard disk (USG6515E, USG6525E, USG6550E,

USG6555E, USG6560E, USG6565E, USG6580E, USG6585E)

Step 3 Install the new hard disk, see Installing the Hard Disk.

Step 4 Run the disk online command in the system view and then the display disk
information command. If Filesystem Status is Mounted, the hard disk works
properly.

----End

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 605

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

Replacing the Hard Disk (USG6575E-B, USG6605E-B, USG6610E, USG6615E,

USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E,
USG6680E, USG6712E, USG6716E)
If a hard disk is faulty (for example, a hard disk failure log is generated on the
USG), you can replace the hard disk. The hard disk can be replaced no matter
when the USG is powered on or off. If the USG is powered off, skip Step 1 and do
not run the disk offline command or press the OFL button. The following
procedure guides you through hard disk replacement while the USG is powered
on:

Step 1 Ensure that all configurations are saved.

Step 2 Run the disk offline command in the system view. Wait about 30 seconds until
the system indicates that the hard disk stops working and then remove the hard
disk to be replaced. Press and hold the OFL button for about four seconds until
the OFL indicator is on. Then remove the hard disk unit to be replaced.
NOTE

If you remove and insert a hard disk without running the disk offline command or press
the OFL button first, the hard disk may be damaged, data in the hard disk may be lost, or
the system may stop responding to services.
1. Press the button on the right of the hard disk tray to eject the handler.
2. Use the handler to pull the hard disk out of the slot.
3. Put the replaced hard disk into an ESD bag.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 606

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

Figure 6-2 Removing the hard disk (USG6575E-B, USG6605E-B, USG6610E,

USG6615E, USG6620E, USG6625E, USG6630E, USG6635E, USG6650E,
USG6655E, USG6680E, USG6712E, USG6716E)

Step 3 Install the new hard disk, see Installing a Hard Disk.
Step 4 Run the disk online command in the system view and then the display disk
information command. If Filesystem Status is Mounted, the hard disk works
properly.
----End

Follow-up Procedure
After replacing the hard disk, collect all tools. If the replaced hard disk is faulty, fill
in the Repair Transmission Sheet and send the faulty module with the Repair
Transmission Sheet to the equipment supplier or the specified repair service
provider.

6.2 Replacing a Power Module

This section describes how to replace a faulty power module.

Context
When two power modules are installed on the USG, one of them is hot
swappable. Pay attention to the following items during hot swapping:

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 607

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

● Power off the power module to be replaced.

● Do not power off the other power module during the replacement.
● Do not touch the other power module either by body or by tools, preventing
human injury or device short circuit.
● DC and AC power modules are incompatible with each other and cannot be
used in substitution.

Tools
ESD wrist strap

Replacing the Power Module

Step 1 Determine the location of the power module to be replaced and attack a
replacement label on the panel to identify the power module.

Step 2 Disconnect the power supply device from the power module to be replaced.

Step 3 Wear an ESD wrist strap.

Step 4 Remove the power cable connected to the power module.

Refer to the following instructions to remove the power cables:

● To remove the AC power cable:
a. Press the baffle on the cable retention clip and remove the cable
retention clip from the AC power cable. (Skip this step if the power
module does not have any cable retention clip.)
b. Pull out the power cable from the socket on the power module.
● To remove the DC power cable:
a. Remove the fastening screws from the OT terminals of the DC power
cable.
b. Pull out the power cable from the socket on the power module.

Step 5 Replace the power module.

The methods to replace the DC power module and the AC power module are the
same. The following uses AC power module replacement as an example.

1. Press the cable retention clip of the power module to the right, hold the front
panel of the power module, and pull out the power module.
2. Note down the cause and time of the replacement as well as the bar code of
the replaced power module and then put away the replaced power module.
3. Take the new power module from the packing box and check whether its
model is the same as the replaced one.
4. Gently push the new power module into the chassis along the power slot.
After the latch on the power module is tightened, pull the power module
gently to check whether it can be removed.
5. Connect the power cable to the socket on the new power module. For details,
see Connecting AC Power Cables (for a 420 mm Deep Device) or
Connecting AC Power Cables (for a 600 mm Deep Device).

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 608

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

Figure 6-3 Replace the power module

6. Switch on the power supply device. If the STATUS indicator on the new power
module of the USG6000E is steady green, the power module works properly.

----End

Follow-up Procedure
After replacing the power module, collect all tools. If the replaced power module
is faulty, fill in the Repair Transmission Sheet and send the faulty module with
the Repair Transmission Sheet to the equipment supplier or the specified repair
service provider.

6.3 Replacing a Fan Module

If the only fan of the USG fails, replace the fan module immediately. Otherwise,
heat dissipation of the device is affected. If the USG has two or more fans and two
or more fans fail, replace the faulty fan modules immediately. Otherwise, heat
dissipation of the device is affected. This section is irrelevant to other models that
do not have independent fan modules.

Context
NOTE

The fan module of the USG is hot swappable. Therefore, when the fan module is faulty, you
can replace the fan module without powering the USG off.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 609

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

NOTICE

To prevent USG overheating, replace the fan module within 1 minute.

Tools
ESD wrist strap

Procedure
Step 1 Wear an ESD wrist strap.
Step 2 Remove the faulty fan module.
Press upwards the fan module latch, hold the handle of the fan module, and pull
out part of the fan module. After the fan stops rotating, slowly pull out the fan
module from the chassis.
Step 3 Install a new fan module.
Hold the handler of the fan module with one hand and the bottom of the fan
module with the other hand, insert the fan module along the guide rail of the fan
slot until the back of the fan module gets in good contact with the chassis
backplane. After the latch on the power module is tightened, pull the fan module
gently to check whether it can be removed.

Figure 6-4 Replacing the fan module

Step 4 Check the FAN STATUS indicator on the panel. If the indicator is blinking green
every two seconds (0.5 Hz), the new fan module works properly.

----End

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 610

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

Follow-up Procedure
After replacing the fan module, collect all tools. If the replaced fan module is
faulty, fill in the Repair Transmission Sheet and send the faulty module with the
Repair Transmission Sheet to the equipment supplier or the specified repair service
provider.

6.4 Replacing a Micro SD Card (USG6510E, USG6510E-

POE, USG6530E)
This section describes how to replace the micro SD card and the precautions.

Precautions
If the micro SD card has one of the following conditions, replace the micro SD
card:
● The micro SD card is damaged. That is, the USG generates the micro SD card
damage alarm: ENTEXT_1.3.6.1.4.1.2011.5.25.31.2.0.16
hwEntityExtDiskDamaged.
● The micro SD card is full. That is, the USG generates the micro SD card full
alarm: ENTEXT_1.3.6.1.4.1.2011.5.25.31.2.0.17 hwEntityExtDiskFull.

Read the precautions on using the micro SD card:

● Micro SD cards are optional and are not delivered with the device. If required,
purchase the micro SD card (part number: 06010308) from Huawei. The micro
SD card model is SDSDQAE-064G, the capacity is 64 GB, and dimensions (H x
W x D) are 1 mm x 15 mm x 11 mm (0.04 in. x 0.59 in. x 0.43 in.).
● Make sure that you have worn an ESD wrist strap and the strap is well
grounded before you hold the micro SD card. Otherwise, the micro SD card
may be damaged.

The micro SD card can be replaced no matter when the USG is powered on or off.
If the USG is powered off, skip the sd-card offline command. The following
procedure guides you through micro SD card replacement while the USG is
powered on.

Tools
● Phillips screwdriver
● ESD wrist strap

Procedure
Step 1 Ensure that all configurations are saved.

Step 2 In the system view, run the sd-card offline command. When the system displays a
message indicating that the SD card is offline, remove the micro SD card to be
replaced.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 611

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

NOTE

● Before replacing a micro SD card, run the sd-card offline command to prevent micro SD
card damage and data loss.
● Do not use too much force; otherwise the micro SD or micro SD card slot might be
damaged.
1. Loosen the screws on the anti-theft board and remove the anti-theft board.
2. Press the micro SD card along the guide rail to loosen the internal card clip.
Then the micro SD card is ejected from the slot. You can then remove the
micro SD card.
3. Place the replaced micro SD card properly.

Figure 6-5 Removing a micro SD card

Step 3 Install the new micro SD card and anti-theft board.

NOTE

● Note that the micro SD card must be installed with the face with words upwards.
● Do not use too much force; otherwise the micro SD or micro SD card slot might be
damaged.
1. Insert the micro SD along the guide rail to the micro SD card slot.
2. When you hear a click, the micro SD card is in position.
3. Hook the locating hook on the anti-theft board to the locating hole of the
rear panel and tighten the captive screw on the anti-theft board.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 612

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

Figure 6-6 Installing the new micro SD card and anti-theft board

Step 4 In any view, run the display sd-card information command to check the micro SD
card installation and file system mounting status. In the command output, SD
Card Physical State should be Present, and SD Card File System State should be
Mounted.
● If SD Card Physical State is Absent, re-install the micro SD card and try
again. If SD Card Physical State remains the same, the USG may fail to
identify the micro SD card. You are advised to use another micro SD card.
● If SD Card File System State is Unmounted, the micro SD card format might
not be ext4. You need to run the reset sd-card command in the system view
to format the micro SD card.

----End

Follow-up Procedure
After replacing the micro SD card, collect all tools. If the replaced micro SD card is
faulty, fill in the Repair Transmission Sheet and send the faulty module with the
Repair Transmission Sheet to the equipment supplier or the specified repair service
provider.

6.5 Replacing a Device

Context
When a fault occurs on the USG device, such as a memory fault, CPLD fault, or
startup failure, you can replace the USG device to rectify the fault.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 613

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

Precautions
Pay attention to the following during device replacement:
● If a device can still be started, save and back up the configuration data before
powering off the device. Otherwise, the configuration will be lost.
● If a device with a hard disk can still be started, run the disk offline command
in the system view. Wait for about 30 seconds. After the system displays a
message indicating that the hard disk stops working, remove the hard disk
unit to be replaced. Alternatively, hold down the OFL button for about 4
seconds until the OFL indicator turns on, and then remove the hard disk unit.
Do not directly remove the power cable or disconnect the power supply to
power off the USG device. Otherwise, data loss and hard disk damage may
occur.
● To prevent a USG device from falling down, hold the device tightly with both
hands while removing or installing it.
● Be careful of the heat when replacing the USG device.
● In a hot standby scenario, ensure that the model and software version of the
new USG device are the same as those of the standby USG device.

Preparing Tools
● ESD wrist strap or ESD gloves
● Phillips screwdriver

Replacing a device
Step 1 Determine the installation position of the USG device to be replaced and attach a
replacement label on the panel of the device to avoid misoperations.

Step 2 Wear an ESD wrist strap or ESD gloves.

Step 3 Disconnect the power supply device from the USG device to be replaced. When
the PWR indicator on the USG device is off, you can proceed with subsequent
operations.

Step 4 Remove the cables from the USG device to be replaced and attach labels that
specify interface numbers to the cables.
NOTE

Remove the power cables, service cables, and ground cables from the USG device to be
replaced in sequence.

Step 5 Remove the USG device to be replaced.

For a device installed on a workbench, you only need to move the device away.
For a device installed on a wall, use a Phillips screwdriver to loosen the M6 screws
on the mounting ears at both ends of the device, and remove the device from the
wall with both hands. For a device installed in a cabinet, perform the following
steps to remove it:
1. Use a Phillips screwdriver to loosen the M6 screws on the mounting ears at
both ends of the USG device.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 614

HUAWEI USG6000E Series
Hardware Guide 6 Maintaining the Hardware

2. Hold the USG device with both hands and pull it out along the guide rails of
the rear mounting ears. Place the removed USG device in an ESD bag or on
an ESD pad.

Figure 6-7 Removing a device from the cabinet

Step 6 Install the new USG device, connect the cables according to the labels, and then
power on the USG device. For details, see Hardware Installation.

----End

Follow-up Procedure
After replacing the device, pack up all the tools. If the old USG device is faulty, fill
in the Repair Transmission Sheet and send the faulty device with the Repair
Transmission Sheet to the equipment supplier or the specified repair service
provider.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 615

HUAWEI USG6000E Series
Hardware Guide A Appendix

A Appendix

This section describes the requirements for the USG installation environment and
Fault Tag template.

A.1 Quick Reference Tables of Power Cables

AC Power Cables for the Power Adapters Directly Connected to the Socket

Table A-1 AC power cables for the power adapters directly connected to the
socket

Part Description Image

Num
ber

0404 External Power Cable, Power

3491 Cable 250V2.5A,2m,
2X0.75mm^2,Black,PASM,
227IEC53-0.75^2(2C)-I,C7SF

0404 Power cord,Europe AC Power

4216 250V2,2.0m,PCSM,
(H03VVH2F-0.5^2(2C)),C7SF,B
lack

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 616

HUAWEI USG6000E Series
Hardware Guide A Appendix

Part Description Image

Num
ber

0404 Power Cords Cable,Japan AC

4496 Power 125V7A,
2.0m,PASM,VCTFK-0.75^2(2C),
C7SF,Black

0404 Power Cable,America AC

4497 Power Cable 125V7A,
2.0m,PASM,
18NISPT-1(2C),C7SF,Black

0404 Power Cords Cable,India AC

5094 Power 250V2.5A,2.0m,PC-
IISM,IS 694-0.75^2(2C),C7S,
250V,2.5A,Black

0405 Power Cord Cable,Brazil AC

0956 Power Cable,250V2.5A,2m,PC-
IIISM,H05VVH2-F
2*0.75^2(2C),C7SF,250V,
2.5A,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 617

HUAWEI USG6000E Series
Hardware Guide A Appendix

Part Description Image

Num
ber

0405 Power cord,BS546 250V2.5A,

1081 2m,PD-IAM,H03VVH2-
F-0.75mm^2(2C),C7SF,250V,
2.5A,Black

0405 Power cord,2m,IRAM2063

1997 Straight Male,H05VVH2-F
2*0.75^2(2C),C7 Straight
Female,250V,2.5A,BLACK

0405 Power Cords Cable,South

G025 Africa AC Power 250V2.5A,
2m,PDAM,H03VVH2-
F-0.75^2(2C),C7SF

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 618

HUAWEI USG6000E Series
Hardware Guide A Appendix

AC Power Cables for the Power Modules Directly Connected to the Socket

Table A-2 AC power cables for the power modules directly connected to the
socket
Part Description Image
Num
ber

0402 Power Cable,America AC

0728 Power Cable,125V10A,
3.0m,PBSM,
18SJT(3C),C13SF,Black

0404 Power Cable,Japan AC Power

0887 Cable 125V12A,
3.0m,PBSM,HVCTF-1.25mm^
2(3C),C13SF,Black

0404 Power Cords Cable,Australia

0888 AC Power Cable,250V 10A,
3.0m,PISM,H05VV-
F-1.0mm^2(3C),C13SF,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 619

HUAWEI USG6000E Series
Hardware Guide A Appendix

Part Description Image

Num
ber

0404 Power cord,BS546 250V10A,

0889 3.0m,PM-IAM,H05VV-
F-1.5mm^2(3C),C13SF,250V,
10A,Black

0404 Power Cable,Britain AC Power

0890 Cable 250V10A,
3.0m,PGAM ,H05VV-
F-1.0mm^2(3C),C13SF,Black

0404 Power cord,Europe AC Power

1056 Cable,250V10A,3.0m,PFSM,
(H05VVF 1.0^2(3C)),C13SF,
250V,10A,BLack

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 620

HUAWEI USG6000E Series
Hardware Guide A Appendix

Part Description Image

Num
ber

0404 Power Cable,Britain AC Power

1117 Cable 250V10A,
3.0m,PGAM ,H05VV-
F-1.0mm^2(3C),C13AF-L,Black

0404 Power Cable,Italy AC Power

1120 Cable 250V10A,
3.0m,PLSM,H05VV-
F-1.0mm^2(3C),C13SF,Black

0404 Power Cords Cable,China AC

2697 Power 250V10A,10.0m,PISM,
227IEC53-1.0^2(3C),C13SF,Bla
ck

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 621

HUAWEI USG6000E Series
Hardware Guide A Appendix

Part Description Image

Num
ber

0404 Power Cords Cable,China AC

2699 Power 250V10A,20.0m,PISM,
227IEC53-1.0^2(3C),C13SF,Bla
ck

0404 Power Cords Cable,Argentina

7785 AC Power 250V10A,
3.0m,PISM,H05VV-
F-1.0mm^2(3C),C13SF,Black

0405 Power Cords Cable,China AC

0139 Power Cable,250V10A,
3m,PISM,
227IEC53-1.0^2(3C),C13SF,Bla
ck

0405 Power Cable,China AC Power

0206 Cable 250V10A,1.0m,PISM,
227IEC53(RVV)1.0mm^2(3C),C
13SF,Black

0405 Power Cable,China AC Power

0517 Cable 250V10A,2.0m,PISM,
227IEC53(RVV)1.0mm^2(3C),C
13SF,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 622

HUAWEI USG6000E Series
Hardware Guide A Appendix

Part Description Image

Num
ber

0405 Power Cords Cable,China AC

0955 Power,250V10A,1.5m,PISM,
227IEC53(RVV)1.0mm^2(3C),C
13SF,250V,10A,Black

0405 Power cord,India AC Power

1035 250V6A,3m,PM-IIAM,IS
694-1.0^2(3C),C13 SF,250V,
6A,Black

0405 Power cord,South Africa AC

1080 Power 250V10A,
3m,PMAM,H05VV-
F-1.0mm^2(3C),C13SF,250V,
10A,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 623

HUAWEI USG6000E Series
Hardware Guide A Appendix

Part Description Image

Num
ber

0405 Power Cords Cable,Korea AC

G028 Power 250V10A,
3m,PFSM,H05VV-F
3*1.0^2(3C),C13SF,Black

0405 Power Cords Cable,Denmark

G02K AC Power 250V10A,
3m,PKSM,H05VV-
F-3*1.0^2(3C),C13SF,Black

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 624

HUAWEI USG6000E Series
Hardware Guide A Appendix

AC Power Cables for the Power Modules Directly Connected to the PDU

Table A-3 AC power cables for the power modules directly connected to the PDU
Part Description Image
Num
ber

0405 Power Cords Cable,China AC

0188 Power 250V10A,1.5m,C14SM,
227IEC53(RVV)1.0mm^2(3C),C
13SF,PDU Cable

0405 Power cord,China AC Power

0846 Cable,250V10A,3.0m,C14SM,
(227IEC53-1.0^2(3C)),C13SF,
250V,10A,Black,PDU Cable

0405 Power cord,China AC Power

0847 Cable,250V10A,6.0m,C14SM,
(227IEC53-1.0^2(3C)),C13SF,
250V,10A,Black,PDU Cable

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 625

HUAWEI USG6000E Series
Hardware Guide A Appendix

Part Description Image

Num
ber

0405 Power Cords Cable,Europe AC

G019 250V10A,1.8m,C14SM,H05VV-
F- 3*1.00^2,C13SF,PDU Cable

0405 Power Cords Cable,North

G029 America AC Power 250V10A,
1.8m,C14SM,SJT
18AWG(3C),C13SF,PDU Cable

0405 Power Cords Cable,Japan AC

G02D Power 250V12A,
1.8m,C14SM,HVCTF
1.25^2(3C),C13SF,PDU Cable

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 626

HUAWEI USG6000E Series
Hardware Guide A Appendix

Part Description Image

Num
ber

0405 Power Cords Cable,Australia

G02F AC Power 250V10A,
1.8m,C14SM,H05VV-
F-1.0^2(3C),C13SF,PDU Cable

0405 Power Cords Cable,Korea AC

G02H Power 250V10A,
1.8m,C14SM,H05VV-
F-1.0^2(3C),C13SF,PDU Cable

DC Power Cables

Table A-4 DC power cables

Part Description Image
Num
ber

0415 Power Cable,3m,4^2mm,PS2F,

2883 (H07Z-K-4^2B+H07Z-
K-4^2BL),2*T4^2GY

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 627

HUAWEI USG6000E Series
Hardware Guide A Appendix

A.2 Requirements for Installation Environment

This section describes the requirements for the USG installation environment, such
as the device position, humidity and temperature, cleanness, antistatic measures,
lightning protection measures, power supply, and anti-magnetic measures.

A.2.1 Device Position

This section describes the USG position requirements to ensure its security.
Table A-5 lists the requirements for the device position.

Table A-5 Device position requirements

Item Requirement

Ventilation and ● To ensure good heat dissipation, keep the air vent of the
heat dissipation device at least 150 mm away from other devices.
● Ensure that the ventilation and heat dissipation system
is available at the position where the device is to be
installed.

Stability The cabinet or mounting table must be firm enough to

support the weight of the device and its accessories.

Grounding Ensure that the chassis or mounting table is properly

grounded.

A.2.2 Humidity, Temperature, and Cleanness

This section describes the requirements for the humidity, temperature, and
cleanness of the equipment room. To ensure the stability and life cycle of the USG
and its components, check that the equipment room meets the requirements.
Ensure that there is no explosive, conductive, magnetic, or corrosive dust or debris
in the equipment room. Dust that settle on the device may cause electrostatic
adsorption, resulting in poor contact of the metal socket connectors and metal
contacts. This shortens the life cycle of the device and causes faults.
In addition to dust and debris, toxic gases, such as SO2, H2S, and NH3 must be
cleaned out of the equipment room.

Table A-6 Requirements for humidity, temperature, and cleanness in the

equipment room
Item Description

Cleanne Dust Maximum 0.05 1 3 5

ss particl diameter
e (μm)

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 628

HUAWEI USG6000E Series
Hardware Guide A Appendix

Item Description

Maximum 1.4 x 107 7 x 105 2.4 x 105 1.3 x 105

density
(number
of dust
particles
per cubic
meter)

Noxio Gas SO2 H2S CI2 HCl HF NH3 O NO

us gas 3 2
densit
y Average 0.3 0.1 0.1 0.1 0.0 1.0 0. 0.5
(mg/m3) 1 05

Maximum 1.0 0.5 0.3 0.5 0.0 3.0 0. 1.0

(mg/m3) 3 1

Humidit Temp Long-term ● Without hard disk: 0 °C to 45 °C

y and eratur operating ● With hard disk(s): 5 °C to 40 °C
tempera e temperatu
ture re

Short-term ● Without hard disk: -5 °C to 55 °C

operating ● With hard disk(s): 5 °C to 40 °C
temperatu
re

Operating humidity ● Without hard disk: 5% RH to 95% RH, non-

condensing
● With hard disk(s): 5% RH to 90% RH, non-
condensing

Storage humidity ● Without hard disk: 5% RH to 95% RH, non-

condensing
● With hard disk(s): 5% RH to 90% RH, non-
condensing

To meet the requirements listed in Table A-6, take the following measures in the
equipment room:
● Install a permanent temperature controller regardless of the climate
conditions.
● In dry regions, use humidifiers or regularly mop the floor to ensure proper
humidity in the equipment room.
● In regions with high humidity, use dehumidifiers.
● Use dust-free materials for the floor, walls, and ceilings.
● Screen exterior doors and windows. The external windows of the equipment
room should be sealed for anti-dust purposes.
● Clean the equipment room and air filters on the devices once every three
months.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 629

HUAWEI USG6000E Series
Hardware Guide A Appendix

● Wear the ESD uniform, ESD gloves, and ESD shoes before entering the
equipment room.
● Locate the equipment room far away from areas with dense corrosive gases,
such as chemical plants.
● The air intake vent of the equipment room must not face any pollution
source.
● Place batteries in a different room from the devices.
● Invite professionals to measure the temperature, humidity, and other factors
periodically.

A.2.3 ESD Requirements

This section describes the ESD requirements. Ensure that the equipment room
meets these requirements because static electricity may damage the USG
components and cause the USG to malfunction.
The absolute value of the static voltage must be less than 1000 V. To meet the
requirement, take the following measures in the equipment room:
● Provide operators with ESD protection training.
● Adjust the humidity to reduce the impact of static electricity.
● Install an ESD floor in the equipment room.
● Wear an antistatic suit, ESD gloves, and antistatic shoes before entering the
equipment room.
● Use ESD tools, such as ESD wrist straps, ESD tweezers, and extractors.
● All the conductors in the equipment room, including computer terminals,
must be properly grounded. Set up an antistatic workbench.
● Electrostatic sources, such as non-ESD plastic bags, non-ESD foam, and rubber
objects must be kept at least 30 cm away from ESD-sensitive components and
boards.
To protect the USG boards from damage caused by static electricity discharge,
take the following measures:
● Ensure that the USG is properly grounded according to the grounding
requirements.
● Wear an ESD wrist strap before performing any operations on the USG.
● Ensure proper contact between the metal buckle of the ESD wrist strap and
the operator's skin. Ensure that the other end of the ESD wrist strap is already
connected to the ESD jack on the USG, as shown in Figure A-1. In addition,
wearing ESD gloves is recommended.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 630

HUAWEI USG6000E Series
Hardware Guide A Appendix

Figure A-1 Wearing an ESD wrist strap properly

● Ensure that the ESD wrist strap works properly and its resistance ranges from
0.75 Mohm to 10 Mohm. Generally, the service life of an ESD wrist strap is
two years. If the ESD wrist strap resistance does not meet the requirement
within its service life, replace it with a new one.
● Avoid contact between the boards and clothes because the ESD wrist strap
cannot protect operators from the static electricity caused by this type of
contact.
● Use an anti-static pad when replacing boards or chips. In addition to wearing
the ESD wrist strap, use ESD tweezers and extractors when inserting and
removing boards and chips. Do not touch chips and their pins with bare
hands.
● Keep all boards and components in ESD bags until they are to be installed.
Place temporarily demounted boards and components on the anti-static pad
or other effective antistatic materials. Do not use non-ESD materials, such as
foam, plastic bags, and paper bags to wrap or make contact with the boards.
● Wear an ESD wrist strap before working on board terminals. Discharge cables
and terminal protection jackets using either contact discharge or air discharge
before connecting them to device terminals.
● Save board packing materials, such as plastic boxes and ESD bags, for future
use.

A.2.4 Lightning Protection and Grounding

This section describes the lightning protection and grounding requirements. Ensure
that the equipment room meets the requirements because lightning is one of the
major factors that causes damage to the USG.
Table A-7 lists the lightning protection and grounding requirements.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 631

HUAWEI USG6000E Series
Hardware Guide A Appendix

Table A-7 Lightning protection and grounding requirements

Item Requirement

Civil The equipment room should be built of reinforced concrete.

construction of The equipment room should be equipped with lightning
the equipment protection devices, such as a lightning arrester.
room
The lightning protection ground for the equipment room (the
grounding of the lightning arrester) should share the same
grounding conductor with the protection ground of the
equipment room.

AC power A dedicated transformer should be used at a communications

system (TN-S station. Power cables that are connected to the
power supply communications station should be buried with metal jackets or
recommended insulated jackets passing through steel pipes. Both sides of the
) metal jackets or steel pipes are connected to the nearest
ground bar. The length of the buried power cables should be
no less than 15 meters.
The three phase lines at the low-voltage side of the AC
transformer at the communications station should each be
installed with a closed zinc-oxide lightning arrester for
grounding. The enclosure of the transformer, AC zero wire of
the low-voltage side of the transformer, and the metal outer
protector of the power cable connected to the transformer
enclosure must be connected to the nearest grounding post.

Incoming AC and DC power cables should not be led into or out of the
power cables communications station through overhead lines.
After low-voltage power cables are led into the equipment
room, in the AC voltage regulator and AC power distribution
box (PDB), install a lightning arrester for power cables and
connect the lightning arrester to the nearest grounding post.
If the equipment room is located in an urban area, the AC
power system of the equipment room should have a lightning
protection unit with a nominal discharge current of no less
than 20 kA. If the equipment room is located in a suburban
area that is classified as a medium or high level lightning zone,
install a lightning protection unit with a nominal discharge
current of greater than 60 kA. If the equipment room is
located in a mountainous area that is classified as a high-level
lightning zone or in an isolated building in an urban area,
install a lightning protection unit with a nominal discharge
current of greater than 100 kA.
The ground cable of the lightning arrester used for the power
supply must be shorter than one meter.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 632

HUAWEI USG6000E Series
Hardware Guide A Appendix

Item Requirement

DC distribution The DC working ground of the communications station (the

grounding positive pole of the -48 V DC power supply or the negative
pole of the 24 V DC power supply) should be led in from the
nearest indoor main earthing conductor.
The device that supplies power to the communications station
should provide the DC working ground that connects from the
collective ground cable of the building (or from the protection
ground bar in the equipment room) to the power supply.

Equipotential The communications devices and auxiliary facilities in the

bonding equipment room must be properly grounded. These devices
and facilities include mobile base transceiver stations (BTSs),
transmission devices, switching devices, power supply, and
distribution frames. All the devices in the communications
station should be grounded to the same ground busbar. All
devices in the equipment room should be grounded to the
same protection ground bar in the equipment room.
A ground grid must be shared by the working grounds and
protection grounds of all devices in the equipment room.
The cable tray, iron suspension racks, racks, chassis, metal
ventilation pipes, and metal doors and windows must be
grounded.

Common The neutral of the AC power cables must not be connected to

grounding the protection ground of any communications device in the
requirements equipment room.
Do not install switches or fuses on the ground cables.
Ground cables should be as short and straight as possible and
should not be coiled.

Grounding Less than 1 Ohm

resistance The upper end of the ground body must be no less than 0.7 m
from the ground. In cold regions, the ground body should be
buried under the frozen soil layer.
Measure the grounding resistance periodically to ensure that
the grounding works properly.

Signal cable No overhead signal cable should exist in the communications

layout station. Signal cables should be led into the station from
underground.
The communications cables led into or out of the
communication station should be protected with metal
sheaths or laid out in metal pipes.
The ground cable of a lightning arrester should be as short as
possible. The unused wire pairs in the cables should be
grounded in the equipment room.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 633

HUAWEI USG6000E Series
Hardware Guide A Appendix

Item Requirement

Collective The main earthing conductor can be a cable grounding ring or

ground cable busbar.
Do not use aluminum materials as ground cables. Avoid
electrochemical corrosion when different types of metals are
interconnected.
Generally, a copper busbar with a cross-sectional area of no
less than 120 mm2 or galvanized steel with the same
resistance is used as the main earthing conductor. The main
earthing conductor must be insulated from the reinforcing
steel bar in the building.

Grounding The grounding lead-in cable must be no longer than 30 m. The

lead-in cable grounding lead-in cable should use galvanized steel with a
cross-sectional area of 40 mm x 4 mm or 50 mm x 5 mm.

A.2.5 Power Supply

Normal power supply is the prerequisite for proper running of the USG. This
section describes the requirements for power supply.

Basic AC Power Supply

The AC power supply system that consists of mains, uninterruptible power supply
(UPS), and self-provided generators should supply power in centralized mode. The
power supply system should meet the needs of the communications station, and
its cabling should be as simple as possible to facilitate operation and
maintenance. The low-voltage AC power supply system should use 3-phase 5-wire
or 1-phase 3-wire for power supply. Table A-8 lists the low-voltage AC nominal
voltage and frequency.

Table A-8 AC voltage and frequency

Nominal Voltage Rated Frequency

110/127/220 (V) 50Hz/60Hz

In common cases, the UPS serves as the backup power supply for network
products. The backup power supply must be the same as the mains in phases, and
the duration for the switchover between the UPS and the mains should be less
than 10 ms. Otherwise, the device might restart or be reset. Each device must
have an independent AC surge protector. The capacity of the surge protector for
the power distribution room must be greater than the sum of the operating
current and fault current on the devices to be powered. The DC power supply
system must be able to safely withstand the maximum load of the device,
regardless of whether the device is in working or standby state. The wire type and
gauge of each outlet of the power distribution panel must be able to withstand

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 634

HUAWEI USG6000E Series
Hardware Guide A Appendix

the maximum power load of the devices. The specifications for the AC power
supply voltage of all communications and power supply devices are as follows:
● Communications devices must be equipped with AC power supply with the
rated voltage ranging from +5% to -10%.
● Communications power supply devices and key constructions must be
equipped with AC power supply with the rated voltage ranging from +10% to
-15%.
● The frequency of the AC power current ranges from +4% to -4%, and the
sinusoidal distortion rate of voltage waveform must be 5% or less.
The self-provided generator sets in the communications station must be automatic
in activation, deactivation, and replenishment, be equipped with remote signaling,
remote measurement, and remote control, and provide standard interfaces and
communications protocols.
The power cables used for AC and DC power distribution should comply with the
following specifications:
● The AC neutral for communications purposes must be a conductive wire that
has the same cross section as the phase cable.
● The selection of the DC power feeder depends on the long-term load. If the
cross-sectional area is greater than 95 mm2, use the rigid busbar. If the short-
term load differs greatly from long-term load, lay out the cables by stages.
● The DC and AC conducting wires must be fire resistant and the wiring must
comply with the Class A Fire Resistance Design Norm for High-Rise Civil
Buildings (GB50045-95). The low-voltage power distribution facilities must
comply with the Low-Voltage Power Distribution Facilities and Wiring Design
Norm (GB50054-95)
In addition, the basic AC power supply system should meet the following
requirements:
● Use voltage regulating or stabilization facilities to restrict the voltage
fluctuation within a reasonable scale if:
– The communications devices are powered by mains, and the voltage
exceeds the rated voltage by +5% to -10% or the allowed voltage range.
– The communications devices are not powered directly by the mains and
the voltage of the mains exceeds the rated voltage by +10% to -15% or
the AC voltage range allowed by the DC power supply device.
● Use the UPS or inverter power supply system if the communication load
requires non-interruptible and non-transient AC power supply.
● Equip the site with the electric generator set to ensure normal communication
in case of mains failure. The capacity of the generator set is greater than or
equal to 1.5 to 2 times the capacity of the UPS.
● A UPS usually has only one batter set. Connect two or more UPSs in parallel
or series for redundancy. If the inverter or UPS is used, configure the inverter
or UPS that provides the maximum amount of power as the active one, and
configure another inverter or UPS as the standby.

Basic DC Power Supply

Ensure the reliability of the DC power supply system at the communications site.
Deploy the power supply device as close as possible to the communications

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 635

HUAWEI USG6000E Series
Hardware Guide A Appendix

devices so as to shorten the power feeder and lower the circuit voltage drop
between the battery port and device port to less than 3.2 V, thereby reducing
installation costs and power consumption.
Use two or more independent power supply systems if the communication volume
is large or if more than two switching systems are deployed at the site.
For large communications hubs, deploy an independent power supply system on
each floor, each providing power for the communications equipment room on this
floor. Medium-sized communications stations can be centrally powered by a
power room or storage battery room, or powered in a decentralized manner. For
small-sized communications stations, the power supply system can be deployed in
the same equipment room as the communications devices, but you must take
appropriate measures to ensure that the corrosive gases discharged by the
batteries in the equipment room do not corrode the circuit boards of
communications devices.
Table A-9 lists the DC power supply specifications.

Table A-9 DC power supply specifications

Item Specifications

Voltage fluctuation range -48 V to -60 V

allowed for the -48 V
input end

Surge current tolerance At least 1.5 times higher than load rated current
capability in DC power capability
supply

Regulated voltage The regulated voltage precision is less than or equal

precision to 1% when the AC input voltage fluctuates
between 85% and 110% of the rated voltage, the
load current varies between 5% and 100% of the
rated current, and the output voltage of the rectifier
is any fixed value in the -46.0 V to -56.4 V range.

On/Off overshoot Within the 95% to 105% range of the DC rated

magnitude voltage value

Peak-to-peak noise Less than or equal to 200 mV

voltage

Dynamic response The recovery time should be less than 200 ms, and
the overshoot must be within the 95% to 105%
range of the DC voltage set value.

The following are suggestions for the basic DC power supply system:
● Decentralized power supply is recommended. Use multiple DC power supply
systems and multiple power sources.
● Use a standard-compliant DC power supply. The output voltage of the
communications power supply must be in the voltage range of the device to
be powered.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 636

HUAWEI USG6000E Series
Hardware Guide A Appendix

● Improve the reliability of the AC power supply system to properly reduce the
battery capacity. When it is difficult to improve the reliability of the AC power
supply system at a small communications station, properly increase the
battery capacity.
● The total capacity configuration of the high-frequency switch rectifier should
match the communications load power and battery charging power. Rectifier
modules should use a redundancy configuration. If the number of active
modules is less than or equal to 10, one standby module should be deployed.
If the number of active modules is greater than 10, one standby module
should be deployed for every 10 active modules.
● Storage batteries should be installed in two or multiple sets. The total
capacity depends on the duration in which the storage battery sets
independently supply power to the load. For most communications stations,
storage battery sets should supply power for at least one hour.

A.2.6 Electromagnetic Protection

This section describes the electromagnetic protection requirements. Check that the
equipment room meets these requirements so as to ensure the normal running of
the USG.

Possible interference sources are as follows:

● Capacitive coupling
● Inductance coupling
● Electromagnetic radiation
● Common impedance (including the PGND system) coupling

To reduce as much interference as possible, complete the following steps:

● Take effective measures to avoid possible power grid interference to the
power supply system.
● Do not use the power line ground or lightning protection ground as the
working ground of the device, and leave as much space as possible between
the working ground of the device and the power line ground or lightning
protection ground.
● Ensure that no high-power radio transmitter, radar transmitter, or high-
frequency high-current device is deployed nearby.
● Take electromagnetic protection measures if necessary.

A.3 Fault Tag

*Customer name:

Address:

Contact person:

Tel.: Fax:

Category*: □ RMA □ Return □ Analysis

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 637

HUAWEI USG6000E Series
Hardware Guide A Appendix

BOM Product Bar Fault Descripti Category Software

Code Descripti Code* Occurrin on of the No.* Version*
on g Date* Fault
Phenome
na*

Reasons for Repairing (Category No.):

Category No. includes the following eight types:

F001 - Wear out damaged (◊ In warranty Period ◊ Out of warranty period)
F002 - Deployment damaged
F003 - Intransit damaged
F004 - Version upgrade
F005 - Batch replace
F007 - Overdue spare parts inspecting
F008 - Others
F011 - Running circumstance change

Note:
● For optical interface cards returned, the optical interfaces should be covered
with protection caps.
● In general, the analysis card will not be returned to you. If you have any
special requirements, please contact Huawei.
● One Fault Tag should be adapted in one return category, such as RMA/
Return/Analysis.
● The items marked with "*" are the mandatory fields that you must fill in.

Issue 10 (2022-12-27) Copyright © Huawei Technologies Co., Ltd. 638