Unit IG2: Risk assessment

Declaration: By submitting this assessment (Parts 1 – 4) for marking I declare that it is entirely my own work. I understand that falsely claiming that the
work is my own is malpractice and can lead to NEBOSH imposing severe penalties (see the NEBOSH Malpractice Policy for further information).

Important note: You must refer to the document ‘Unit IG2: risk assessment – Guidance and information for learners and Learning Partners’ while
completing all parts of this assessment. Your Learning Partner should provide you with a copy, but it can also be downloaded from the relevant
resources section for this qualification on the NEBOSH website.

Part 1: Background

You should aim to complete this section in 150 - 200 words.

Topic Comments
Name of organisation* Business solution engineering construction company (PVT) (LTD)
Site location* Chungi number 9 Multan Pakistan
Number of workers 456 worker
Business solutions engineering construction company (PVT) (LTD). Is a local construction
company working in Pakistan since 1979. Number of projects are done by them. Most of
them are buildings and roads construction.
I visited the site on
Bakhtawar ameen is being constructed by business solution engineering construction
company. After completion of the project, different health care services will provide
including general treatments heart operations, delivery operations, injuries operation,
bones operations etc. there will be five flours in this hospitals. 27 departments, 159
General description of the organisation rooms, and three ground as waiting place, 42 wards and a ground for parkin with four
gates. The area covered by the hospital is 136464 square meters. Working time period is
divided into two shifts (8 am to 4 pm) with one hour rest break from 12pm to 1pm and
(6pm to 2am) with one hour rest break from 11:30pm to 12:30am. Sunday is off, and
other days are working. Activities scaffolding erection, material shifting excavation,
watering , materials carrying, scaffolding, cementing of boundaries wall, material loading
and unloading, machineries works, carpenting, electrical activities and roofing.
Machineries and equipment’s are used including Excavator, Crane activities, crane lifting
crane shovels mixture, mini-Crane, trucks scaffolding etc. Materials which are used sand,

Learner number: Learner name: Page 1 of 17

 iron, earth filling, cement, steel, concrete, bricks, blocks and aggregates etc. are used.
Description of the area to be included in the
The risk assessment cover whole construction site and all mentioned activities.
risk assessment
0ne of major responsibility of project manager is, overall taking care of OHS of the
Any other relevant information
project.
* If you’re worried about confidentiality, you can invent a false name and location for your organisation but, all other information provided must be
factual.

You should aim to complete this section in 100 - 200 words.

Note: this section can be completed after you have competed your risk assessment.
External source of information (HSE notes, ILO websites):
Before visiting at site I collect information from different HSE notes and also search different
websites and read out ILO conventions and articles.( https://www.ilo.org/global/topics/safety-and-
health-at-work/normative-instruments/code-of-practice/WCMS_107826/lang--en/index.htm

https://www.hse.gov.uk/construction/)

Outline how the risk assessment was Internal source of information;

carried out this should include: When I go for visit, senior supervisor of company show me all the legal documents of the company
 sources of information consulted; including company policies, company previous incidents, accidents and near misses reports. After that we
 who you spoke to; and go to workers site and conduct an interview verbally. I asked him about company polices and company
work methods, procedures .some of them was well competent and experienced workers and some of
 how you identified:
them was new and un trained. Some experienced workers describe many new hazards and such type of
- the hazards;
hazards was not enlist in company documents, so their control measures not applied yet
- what is already being done; and
Then we go to admin office of the company and check out whole activities record including occupational
- Any additional controls/actions that
health disease record, permit to work system records, risk assessment records. Complains records and
may be required.
workers records about joining and resining.
Wortkers already have personal protective equipments including safety helmet, safety shoes, safety
goggles and earplugs but these are not enough to control hazard of the site so,
Resultantly I decided that previous control measures are not enough to control hazards and risk so, I
suggest a new one risk assessment.
External source of information for control measures:
(https://www.ilo.org/global/topics/labour-administration-inspection/resources-
library/publications/guide-for-labour-inspectors/fire-safety/lang--en/index.htm)

Learner number: Learner name: Page 2 of 17

Learner number: Learner name: Page 3 of 17
 Part 2: Risk Assessment

Organisation name: business solution engineering construction company

1. Date of assessment: 11-02-2024
Scope of risk assessment: this risk assessment cover hole site activities scaffolding erection, material shifting excavation, watering ,
materials carrying, scaffolding, cementing of boundaries wall, material loading and unloading, machineries works, carpeting, electrical
activities and roofing

Hazard Who might be harmed What are you already What further controls/actions are Timescales for
category and and how? doing? required? further actions Responsible
hazard to be person’s job
completed title
(within …)
Noise Workers, visitors, HSE Only competent worker can 1. Introduce ups system at site and 1. 2 month 1. Finance
officer, and site perform work controlling. 2. 3 month Manager
Generator is a supervisor can be 2. Generator system should replace 3. 1 week 2. Finance
source of large harmed by noise. by solar system. 4. 10 days Manager
magnitude of 3. Generator should be keep in 5. 1 month 3. Site
Workers perform their
noise at site. covered area and make distance 6. 3 weeks Manager
duties at work site in the form work site. 7. 1 month 4. site
presence of generator 4. Silencer should installed on supervisor
noise, visitor visit the generator. 5. Site
work site and all these 5. Provide proper training to worker Manager
activities are done by the about work in noise environment. 6. site supervisor
supervision of HSE 6. Provide proper PPEs (ear muff, 7 senior
officer and site era plug) at work site. manager
supervisor. So, they may 7. PTW system should be
be stressed by noise introduced at site.
their memory effected,
their hearing damage.
Electricity Workers, Electricians and TBT conducted at regular 1. Residual current device (RCD) 2 month Finance
site visitors may become bases at work site before should introduce at side. 1 month manager
Un-Insulated harm. start the work. 2. Install electric current breakers 25 days Site
electric cable Workers perform their on main panel. 20 days manager
3. Should replace un-insulated wire 1 month Site
and poor duties day and night
with double insulated wire. 3 month supervisor

Learner number: Learner name: Page 4 of 17

Hazard Who might be harmed What are you already What further controls/actions are Timescales for
category and and how? doing? required? further actions Responsible
hazard to be person’s job
completed title
(within …)
electric board shifts. Unconsciously 4. Wire hangers should introduce at 2 weeks Site
and they can approach to work place. manager
extensions poor electricity. 5. Only competent worker allow to HSE
By using power tools work at side. officer
6. Electrical permit to work system Senior
wires can spark due to
introduce at side. manager
high load and worker 7. Must provide suitable PPEs Site
harmed. including shock resistant gloves supervisor
Wire can collapse with and shoes which provide
scaffolding during work. protection from electric shock.
Hand trollies can
approach to poor
connection by shifting
material at site.
Due to such type of
hazards worker may
injured, their body parts
can burn and even death.
Fire Fabricator, fitter, fire watch, Hot work will be performed in the 1. Flammable material should 1. 3 month 1. Senior Manager
other workers, visitors, and presence of fire watch. 2. 1 month 2. HSE Officer
store is separate room and
supervisor can be harmed 3. Site supervisor
Perform arc
by fire. maintain safe distance. 3. 3 weeks 4. Site manager
welding near 2. Working area should be free 4. 1 month 5. Safety officer
the flammable Welder perform from combustible material. 5. 1 week 6. Safety officer
‘combustible uncontrolled arc welding 6. 3 weeks 7 Site supervisor
fitter use grinder for pipe
3. Perform welding activity by 8. Safety officer
material and 7. 4 weeks
fuel drums. cutting welding and grinder covering material. 9. HSE officer
spark can approach to
8. 2weeks
4. Smoke detectors and fire
combustible material and 9. 1 month
alarm must install at work
can cause fire at site.in the
result of fire they can burn, side.
there body parts can 5. Fire extinguisher should avail
damage, property destroy, at site.
even death can be

Learner number: Learner name: Page 5 of 17

Hazard Who might be harmed What are you already What further controls/actions are Timescales for
category and and how? doing? required? further actions Responsible
hazard to be person’s job
completed title
(within …)
occurred. 6. Provide proper training to
worker about emergence
procedures.
7. Everyone must have
awareness about exit way.
8. Conduct tool box toll before
start activity.
9. Only inspected power tools
should use at site.
Slip and Trip Workers who work at Sign boards are provider at 1. Only inspected machineries 1. 4 month 1. Site manager
site, visitors, site site. should be used at site. 2. 1 month 2. Site
Oil spillage supervisor and safety 2. Proper maintenance should 3. 2 month supervisor
officer can be harmed. provider at machineries to stop 4. 1 week 3. Site man ager
from mixture the oil spillage 5. 2 week 4. Safety officer
machine on 3. Supervision should be active on 6. 1 month 5. Safety officer
walk way. Worker works at site site and continuously 7. 1 week 6. Site
near mixture machine, 4. Sand should be avail at work site. 8. 5 days supervisor
spillage oil can cause 5. Barication tape must be used at 9. 3 weeks 7. HSE officer
Lacking of 5.s
slippery surface and site for barricading of slippery 8. Site
condition at
workers may slip and area. supervisor
working site. 6. Tools tray should be used at site
trip at site visitors also
in same danger, 7. Two boards should be Installed
disorder of tools can be oh scaffolding
lead to trip. 8. Tool must in order
9. Electric wire should be hanged at
They can injured,
site
bones can facture, and
material destroy and
cut injuries.

Learner number: Learner name: Page 6 of 17

Hazard Who might be harmed What are you already What further controls/actions are Timescales for
category and and how? doing? required? further actions Responsible
hazard to be person’s job
completed title
(within …)
Work at Height Workers, visitors, and site Scaffolding Sharp edges are 1. midd and top rail of scaffolding 3 weeks Site supervisor
supervisors can be harmed. covered. should be installed. 2 weeks Site supervisor
Fall from 2. Two board must be installed. 1 month Site manager
scaffolding 3. Make sure mobile scaffolding for 2 weeks Safety officer
Workers perform work at work at height. 3 weeks Site supervisor
height for different 4. Scaffolding inspection should be 1 month HSE officer
purposes, for civil make sure before start the work at 6 weeks Site manager
construction at height by height 1 week HSE officer
using scaffolding they can 5. Planer must able to use.
6. Scaffolding width and height should
fall from height by material
be on safety stander.
shifting, two board are not 7. Third party certified harness make
installed so equipment’s sure at site for work at height.
can fall from height and 8. Workers should be trained for work at
may lead to head injury, cut height.
injury, back bone injury,
bones fractures and even
death.
Movement of Drivers, workers, visitors, Workers use safety helmet and 1. One way traffic system should be 1 year Finance manager
people and and supervisors can be other personal protective introduce at site. 6 month Site manager
vehicles harmed. equipment’s 2. Walk way should be barricaded. 3 month Site supervisor
3. Only inspected vehicles should 2 month Site manager
Workers and Vehicles and workers use be use at site. 6 month Senior manager
vehicles use same way , vehicles for 4. Speed limit sight should be on 3 weeks Site supervisor
some path. material shifting and and installed at site. 2 month Site manager
worker for job , due to same 5. Only compete (Licence holder) 2 month HSE officer
way accident can be, driver drivers drive vehicles at site.
and worker may injured by 6. Avoid to reversing of vehicles.
cut injury, muscles can be 7. Concave mirrors should be
damaged, bones can be installed on turns.
facture and even death as 8. Workers should be aware about
the result of serious traffic rules and the hazards of
accident traffic.

Learner number: Learner name: Page 7 of 17

Hazard Who might be harmed What are you already What further controls/actions are Timescales for
category and and how? doing? required? further actions Responsible
hazard to be person’s job
completed title
(within …)
Hazard Workers, visitors machine Surgical mask provider to worker. 1. Water should be used on red to 2 month Site supervisor
Substances operators and supervisors suppress the dust. 3 month Site manager
can be harmed 2. Replace hazard us substance to 1 month Site manager
Moving vehicles’ less hazardous. 2 month Finance manager
Sand ‘stone and Workers perform civil work 3. Use less dangerous acid instead 2 month Site manager
bricks produce at site and also shift of sulphuric acid. 3 weeks Site supervisor
large quantity of material by using different 4. Make sure proper ventilated dust 2 weeks HSE officer
dust. trollies shift sand from one free rest hall for worker.
location to another also use 5. Install exhaust fans.
chemicals for painting 6. Provide suitable PPEs according
process and these things to nature of job.
cause dust which is 7. Make sure K-N95 mask at site.
dangerous for health lungs
inhale dust and other toxic
dust in the result of that
lungs can be damaged,
heart beat can be effected
and occupational disease
Load handling Crane operator, rigger, Use of safety helmet at site 1. Place should be levelled for 2 month Site manager
equipment visitors, supervisor and crane activity 1 month Site supervisor
workers 2. There must be sole plate under 24 days Site manager
Use of crane for carne outriggers 5 month Site engineer
lifting at Crane used at unbalanced 3. Crane should be inspected 2 weeks HSE officer
unbalanced place can collapse. Iron 4. Rigger and crane operator should 4 weeks Senior manager
place bars can fall and workers have proper and valid license 1 week Safety supervisor
can be injured, cut injury 5. Lifting plan should be valid and 16 days Site manager
can happen and bone according to crane capacity.
fractures can happen head 6. Work permit system should be
injury and even death allotted
7. Area must be barricaded
8. signs board should be installed at
site

Learner number: Learner name: Page 8 of 17

Hazard Who might be harmed What are you already What further controls/actions are Timescales for
category and and how? doing? required? further actions Responsible
hazard to be person’s job
completed title
(within …)
Confined Workers and cleaner could Personal protective equipment 1. LEL, UEL Gas testing must be
be harmed. are being used, Highlight jackets conducted.
space are provided. 2. Oxygen test must be conducted.
Worker entering the 3. Temporary Air ventilation system
Water tank confined space might get should be installed.
clean without exposed to toxic gas 4. A whole watcher must be assigned
present there, low level of for monitoring of confined space
proper gas
oxygen can cause breathing activity.
testing, lighting problem, high level oxygen 5. A proper communication system
and might led to explosion. should be introduced between
ventilation. confined space workers and whole
watcher. This mean can be ropes tide
between works and whole watcher or
walkie talkies.
Manual Workers and Company’s PPE were being used. 1. Wet surface caution tag must be 2 month Site supervisor
property can be harmed present. 1 month Site supervisor
Handing and damaged. 2. Surface must be cleaned and 3 weeks HSE officer
dried properly 1 month Safety officer
Workers were Due to wet surface there is 3. Workers must not carry load 3 weeks Safety supervisor
carrying heavy danger slip trip fall that more then allowed limit and there 3 month Site manager
load through might cause injury and fatal carrying capacity.
wet surface. consequences 4. They must watch for wet surface
and must be careful there and
must wore rubber sole shoes for
avoiding slips.
5. Small parts should be carried in
buckets.
6. Heavy load must be transported
using trolleys or mobile cranes
rather than carrying manually.

Learner number: Learner name: Page 9 of 17

Hazard Who might be harmed What are you already What further controls/actions are Timescales for
category and and how? doing? required? further actions Responsible
hazard to be person’s job
completed title
(within …)
Health, Workers, supervisors and Workers were wearing PPEs. 1. Moisture blowers should be 3 month Finance manager
all those working in field. introduced at sight. 2 month Site manager
Welfare 2. Water coolers should be present for 3 weeks HSE officer
and Work Due to less consumption of continuous consumption of workers 1 month Site supervisor
water, overheated 3. Workers not work on outside activity 2 weeks Site supervisor
Enviroment environment all those if temperature is above 45 degree 2 month Site manager
workers working in field can 4. Humidity must also be monitored and HSE officer
Workers faint workers should not work outside on
working above red flag.
the temperature 5. Job rotation should be provided.
of 45 degree 6. There must be continuous monitoring
can get heat of workers
strokes and 7. Workers should be provided with
might faint food and booster shots.

Vibration Vibrator machine operator, Break for rest are provided to 1. Introduce roller machine at site for 5 month Finance manager
other workers who perform workers. rod levelling instead of compactor 3 month Site manager
Concrete any other work near vibrator machine. 2 month Site supervisor
vibrator machine can be harmed. Proper job rotation is provided. 2. Make sure liquid material for concrete 4 month Site supervisor
machine are and reduce the use of vibrator 1 month HSE officer
use at site for Operating any vibrate machine. 2 month Safety supervisor
concrete handheld tool (jackhammer 3. Introduce less vibrator machine 2 month Site manager
compaction in compactor electric vibrator instead of high vibrator machine. 3 month Site supervisor
the roads and machine)for removing 4. Make sure vibration absorb material 1 month
builidings trapped air and excess for handling compact machine.
moisture .such type of 5. Pneumatic shock absorber should be
machine can damage installed on compactor machine.
figures, blood circulation, 6. Only competent worker should
blood vessels, and muscles perform work.
of hand , arm, back bone 7. Worker should be trained.
pain, mentally stress and 8. Make sure active supervision at site.
even nervous system.. 9. For steel handling pallet trucks
should be provided to workers.

Learner number: Learner name: Page 10 of 17

Hazard Who might be harmed What are you already What further controls/actions are Timescales for
category and and how? doing? required? further actions Responsible
hazard to be person’s job
completed title
(within …)
Work Workers, visitors and 1. Guard should be installed on grinder 2 month Site manager
equipment supervisors can be harmed 2. Disk rpm must be 10% more than 1 month Site supervisor
grinder rpm. 2 month HSE officer
and Workers use grinder for 3. Disk should be inspected 1 month Safety officer
machinery shuttering process without 4. Grinder should be inspected 2 weeks Safety supervisor
installation of guard. They 5. Grinder wire should be inspected and 1 weeks Site supervisor
Workers using also use it for steel cutting, should not be damaged 2 weeks Site manager
angular grinder without proper guard. Disks 6. Power tools should be unplugged 3 weeks
without guard also not inspected. And disk Workers are being using face after use 1 month
rpm are less then grinder shield. 7. Use right tools for the work
for cutting iron rpm so disk can break, 8. Workers should be competent and
length for workers can be injured trained for the job
shuttering. there body parts can be 9. Use anticut gloves
damaged along cut injuries. 10. Hand grip must be installed under the
grinder for avoiding slip
11. Active supervision must be provided

Learner number: Learner name: Page 11 of 17

Part 3: Prioritise 3 actions with justification for the selection
Suggested word counts
Moral, general legal and financial arguments for all actions: 300 to 350 words
For EACH action:
Specific legal arguments: 100 to 150 words
Likelihood AND severity: 75 to 150 words
How effective the action is likely to be in controlling the risk: 100 to 150 words

Moral, general legal and financial arguments for ALL actions

Moral, general legal and financial Moral argument:

arguments Moral point of view, company is responsible to provider health atmosphere and safe work place to worker.
Worker work for their families and other dependent if worker injured its means their family injured by
financially. Those companies cannot survive which not follow the safety policies and safety rules and
regulations such type of company’s loss their reputation in society and filed. Worker feed uncomforted to work
with them and company face dark day
General, legal argument:
According to national and international standard company is responsible to provider health and safety to
worker and follow legislation rules and regulation company should provide safe and relatable working plate
form to worker.
ILO C155 also bound to companies for safety culture. If company cannot follow the safety rules then may it
face difficulties in form of financial loss’ worker loss’ equipment loss’ reputation damage.
Financial argument:
Accident create different difficulties for company especially loss of finance due to loss of worker’ hire new
worker ‘ loss of property ‘ machinery loss ‘ charger for maintenance of damage equipment ‘ pay for treatment
of injury worker ‘ in the result of catastrophic accident’ company may banned by court.

Justification for action 1

Action (Taken from column 4 of risk Hazard Category: Fire(1)

assessment) 1. Flammable material should store is separate room and maintain safe distance.

Learner number: Learner name: Page 12 of 17

 Specific legal arguments The International Labor Organization (ILO) convention 167 occupational safety and health article (29)
state that :
“ it is Employer responsibility to provide proper safe separate room for storing flammable liquid at site .”
Under the International Labor Organization (ILO) code of practice R 164:
Workers safety is first priority of any organization, so organization should provide safe zone from fire
explosions.
PAKISTAN OHS Act,2018 States that:
The Government of Pakistan is responsible for, implementation and enforcement of all the relevant
conventions and the recommendation of the International Labour Organization (ILO).
Consideration of likelihood AND severity The likelihood of the hazard is very likely since 11 workers are performing the welding activity for
7 hours at regular basses in the presence of flammable material. They can injured including
 types of injury or ill health serious burns, loss of body parts, full body burn and may result in death.
 number of workers at risk
 how often the activity is carried For suggesting severity I will consider the following:
out Low: No injury or damage happened.
 how widespread the risk is
High: May cause the minor injury demanding first aid or insignificant damage of building and
equipment.
Major: Tissue burn, Body burn fatal injuries demanding hospital treatment damage of building and
equipment.
Catastrophic: Disability, Death, loss of property, equipment and machinery.
The severity of this hazard is set from the above table is Major and Catastrophic, because the
injury may need hospital treatment and might lead to death.
The risk is at workplace only and all workers are involved in other activity near the welding
activity are also exposed to this risk.

How effective the action is likely to be in

controlling the risk. This should include:
The intended impact such as by constructing separate room for flammable material the
risk of fire will be reduced. This will make safe and secure work place for workers.
 the intended impact of the action;
I suggest the timescale of 3 months to construct the room. As first of all, Budget must be
approved by finance manager for the construction after that arrangement of the

Learner number: Learner name: Page 13 of 17

  justification for the timescale that construction material will be done and then construction work will be start .hopefully this
you indicated in your risk action will be done within the given timescale.
assessment; and
 whether you think the action will The risk almost will controlled by constructing separate room for flammable material and
fully control the risk workers can perform their expertise freely at site.

Justification for action 2

Action (Taken from column 4 of risk Hazard category: Work at height

assessment) 9. midd and top rail of scaffolding should be installed

Specific legal arguments The International Labor Organization (ILO) convention 167 occupational safety and health
article (18) states that “according to the necessity should provide guard against falling hazard, or
if height of a structure or its slope exceeds that described by national laws or regulations,
preventive measures should be taken for the safety of workers and tools or other objects or
materials”
Under the International Labor Organization (ILO) code of practice article (8.1.1) states that
provide suitable platform to workers for work at site which is must be inspected.
PAKISTAN OHS Act,2018 States that:
The Government of Pakistan is obliged for this implementation of all the related conventions and
the recommendation of the International Labour Organization (ILO).
Consideration of likelihood AND severity The likelihood of getting injuries is very likely since 21 workers are working on the
 types of injury or ill health scaffolding without proper railing for 5 to 6 hours which may lead to workers falling from
height injured including head injuries, muscles damaging, bone fractures, body parts
 number of workers at risk
loos, disability, and may results in death.
 how often the activity is carried
out By considering the severity, I set the following group for it.
 how widespread the risk is Negligible or minor: No injury or near miss incidents.

Learner number: Learner name: Page 14 of 17

 Marginal: Minor injuries demanding first aid and less damage of property and equipment.
Major: injuries demanding the hospital treatment and significant damage of property and
equipment.
Catastrophic: head injury, spinal injury, disability, death and loss of property, equipment
or machinery.
The severity for this hazard is set from the above table to be Major and Catastrophic,
because the injury will need hospital treatment and lead to disability which could also lead
to death.
The risk is covered the whole scaffolding platform and the workers working near the
scaffolding and visitor’s even supervisors are also directly exposed to this risk.

How effective the action is likely to be in

controlling the risk. This should include:
The inteSnded impact such as by installing the guard rail, mid rail and toe board on the
scaffolding, it will provide safe workplace and safe platform to workers. All the activities will
 the intended impact of the action; be done with in safe and secure manners.
 justification for the timescale that
you indicated in your risk I suggested 3 weeks for installing the guard rails on the scaffolding. Because initial
assessment; and inspection will be completed with in a day then site manager will provide material to folder
 whether you think the action will they will install, so for whole process will be done in three weeks
fully control the risk The risk will reduced. And workers can perform work easily safely and proper supervision
also necessary.

Justification for action 3

Action (Taken from column 4 of risk Hazard category: electricity(1)

assessment) Residual current device (RCD) should introduce at side.

Specific legal arguments International Labor Organization (ILO) Convention 167 occupational safety article 27.
Electrical cables and apparatus should be in good condition and must follow national level standards at site.

Learner number: Learner name: Page 15 of 17

 International labor organization (ILO) convention 167 and article 28.
Hazardous substance should be reduce with one of less hazardous substance for providing rilaiable safe
working platform to workers at site.

PAKISTAN OHS Act,2018 States that:

The Government of Pakistan is obliged for this ratification, implementation and enforcement of all
the relevant conventions and the recommendation of the International Labour Organization (ILO).

Consideration of likelihood AND severity The likelihood of this hazard is very likely because there are 42 workers who are perform
 types of injury or ill health different activities near the cables and circuits. They can face burn injuries, electric shock,
and even death in the result of that type hazards.
 number of workers at risk
 how often the activity is carried Workers who are at risk including supervisors and visitors are 42 in danger
out
For considering the severity, I set the following table for it.
 how widespread the risk is
low: No injury or near miss incidents
high: injuries demanding first aid treatment or minor damage to building, equipment or
machinery
Major: injury which lead to hospital for treatment or significant damage to building,
equipment or machinery.
Catastrophic: whole site workers can damaged and burn by electric shock and even
death, building can destroy and machineries damaged.
The severity for this hazard is set from the above is high and Catastrophic, because the
body burning would need the hospital treatment and also death can be occurred.

The risk is confined to the whole working area as the cables are present in the entire
workplace and all workers and some visitors are directly exposed to the risk.

Learner number: Learner name: Page 16 of 17

 How effective the action is likely to be in
controlling the risk. This should include:
The intended impact such as by installing residual current devices at workplace, this would
help to avoid the electric shock at site and providing healthy environment to the workers for
 the intended impact of the action; wok.
 justification for the timescale that
you indicated in your risk The suggested timescale is 3 month since first of all the finance manager will arrange
assessment; and budget for the residual current device purchasing after that it will be installed at site . I hope
 whether you think the action will the suggested timescale is enough for the required task to be completed
fully control the risk By applying this control measures electricity hazard will be reduce significantly.

Part 4: Review, communicate and check

Suggested word counts for each section:
 Planned review date or period and reasoning for this: 50 - 100 words
 How the risk assessment findings will be communicated and who needs to know the information: 100 - 150 words
 Follow up on the risk assessment: 100 - 150 words.

Planned review date/period with This risk assessment will be review after a year, Feb -09-2024. The reason of revision is that its
reasoning company policy that every risk assessment will be revised after a year.
It will also review, if company policies change, man power increased, new technology introduced,
legislation change, accident occurred, and even the nature of job can.
How the risk assessment findings will be When all the process will be completed, I will conduct a meeting with project manager and share all
communicated AND who you need to tell the points of risk assessment with them, then I will meet to directors and site managers of company
for sharing and discussing of risk assessment.at the end I will conduct a tool box talk in front of
workers and their representatives about risk assessment, I will show all hazards of risk assessment
at company notice board
How you will follow up on the risk I will write dairy for reminder in which I will mention all details about risk assessment and visit time
assessment to check that the actions periods. i will actively visit the site (before mentioned visit time) if I am not avail for visit then I will
have been carried out require photographs as proof from responsible person. If something went wrong in the form of
delaying control measures, due to finance, I will directly convinced and concerns to finance
manager for budget approval and also will concern to management for problem sort out soon as
possible.

Learner number: Learner name: Page 17 of 17