1. An employee reports an absence that spans several payroll periods.

Where can SAP Payroll evaluate the absence

using absence valua on?

A. On the working day in which the absence ends

B. In the payroll period in which the absence begins

C. On the actual dates in each affected payroll period

2. The following wage type with its wage type fields is given:
Wage Type Number Amount
5000 = Rate
10 0 13
What is the result of the wage type in the output IT if it only runs through the following calcula on rules: MULTI RAA
and ADDWT *?

C. Rate = 10 Number = 0 Amount = 130

4. You want to mul ply wage type fields rate and number in a calcula on rule. The result should be in the amount field.
The values in the rate and number fields should then be set to zero. Which arithme c opera ons do you have to use?
D. MULTI ANR ZERO=N ZERO=A
6. What opera on must you use to query an employee's personnel area in a personnel calcula on rule (PCR)?
A. OUTWPPLANT
7. What set of infotypes is required to run payroll?
D. IT0000 IT0001 IT0002 IT0007 IT0008
8. Which processing class determines if a wage type should be considered for factoring?
A. Processing class 10
9. Which func ons are used to access me wage type selec on rules in table T510S?

C. DAYMO GWT

10. Which wage type do you use for cumula ons?

B. /101

11. How can you view the status of the payroll run?

D. By using the payroll control record

12. Which func ons use MODIF A to evaluate absences?

C. PAB

13. In what customizing table do you group employees for use in personnel calcula on rules (PCRs)?

B. V_001P_K

15. A vaca on wage type is to be generated for an employee based on vaca on. Which iden fiers play an important
role in Absence Valua on (v_T554C) in Customizing?
A. MODIF A and Absence Valua on Rule
17. What func on generates me wage types on the TIP table?

A. GWT

18. In which payroll subschema are me wage types selected?

C. TC00 Time Data Processing, WT Selec on

19. Which of the following personnel calcula on rules does the system use in the subschema of XAL9 factoring and
storage? Note: There are 2 correct answers to this .

B. X015

C. XPPF

21. Under what condi on will a me wage type be selected using the rule shown in the a ached graphic?

C. NOT on a public holiday

22. When processing a wage type, there is no requirement to differen ate between employee subgroup groupings.
What value must you add in parameter 3 when func on PIT calls the rule to process the wage type?
C. NOAB
23. What is the name of the interna onal subschema that is used to ini alize payroll?
C. XINO
25. In what order are the subschemas processed in the payroll main schema X000?
B. 1. XBDO Edit basic data
2. XTOO Gross remunera on (Time Management)
3. XAL9 Factoring and storage
4. XEND Final processing

27. Which personnel calcula on rule is used to determine the "Time wage type selec on group" (MODIF W)?
A. XMOD
31. What func on do you use to select the me wage types for table DZL?
C. GWT
33. What is the purpose of the GENAU constant in the standard payroll process?
B. It increases the accuracy of rounding.
34. What should be the status of the payroll control record if you want to create live pos ng documents?
D. Exit payroll
35. All wage types in the input table (IT) must be processed using personnel calcula on rule Z123. In addi on, you need
to consider the employee subgroup grouping for the personnel calcula on rule. What configura on should you set up
to accomplish this?
A. PIT Z123 <blank> <blank>

36. What do you need to configure to valuate a me wage type using a wage-type-dependent constant?
C. Personnel calcula on rule XMOD with MODIF 2 groupings
40. How can an HR administrator process payroll for an employee a er the employee has le the organiza on?
A. Maintain Run Payroll up to Date on the Payroll Status infotype (IT0003).
42. What opera on do you use to query the average working hours per pay period for each par al period in table
PARTT?
B. TSDIVP
44. Which func on in sub schema XBDO (basic data) checks if all master data has been completely imported?
B. GON
45. You want a basic wage type to be included in valua on basis /001 in order to determine an amount per hour. What
processing class do you use to achieve that?
A. 1
46. What does opera on ELIMI do in a personnel calcula on rule (PCR)?
A. It prepares wage types for accumula on.
47. With which opera on can you transfer wage types to an internal table?
C. ADDWT
48. What does func on GEN/8 do?
D. It mul plies a wage type by 100000 and writes the result to the rate (RTE) field for each par al period.

49. To include absence hours in the PARTA table, what must be defined in absence valua on rules?
A. Coun ng class
50. You want to use a wage type in infotype 8 (Basic Pay) that valuates your amounts indirectly from the pay scale
table. Which module do you use for this?
D. TARIF

52. What value does wage type /810 hold during factoring / prora on?
A. The difference between planned working me and average working me

53. In which internal table can you find the cumulated me wage types?
B. ZL

56. What system switch controls integra on between Organiza onal Management and Personnel Administra on?
B. PLOGI ORGA

57. How many parameters can func on DAYMO use?

D. 4

59. In which order can you carry out the payroll process?
C. 1. Start payroll.

2. Check result.

3. Exit payroll.

60. What personnel calcula on rule controls the valua on of me wage types according to the principle of averages?
A. X016 Special processing for the valua on of me wage types

62. You want to calculate par al period factors including unpaid absences in work days for all coun ng classes. What
variable do you use?
B. KAU**

63. Which secondary wage types are available for average calcula on?
B. /201 to /232

64. You are using opera on ADDWTE*. Into which table will the wage type be transferred?
B. Results table (RT)

65. Which of the following is an executable payroll schema?

A. X000

67. Which calcula on rule determines the valua on of the wage type based on the cumula ve average basis?
C. X018

69. What transac on do you use to create a new personnel calcula on rule?

B. PE02

70. Which of the following are applicable to retroac ve accoun ng (2 Correct Answers)

A. You can use the "Forced retro.accoun ng" data field to trigger a forced retroac ve accoun ng.

C. A change to master data that is relevant for payroll in the current period automa cally leads to retroac ve accoun ng.

72. Which variable do you use to import an employee's actual planned working me for each par al period?

B. 1. KSOLL 2. ASOLL 3. SSOLL

73. What condi on can be included in an adjustment rule for averages?

D. Average bases

75. In addi on to the fixed values from SAP, you want to use customer-specific values of the "Employee subgroup
grouping for personnel calcula on rule" in your personnel calcula on rules. What values can you use for this?
B. 00 to 99

76. What is the purpose of the Payroll Status infotype (IT0003)?

D. To control the retroac vity of an employee's me evalua on and payroll runs

78. You want to calculate wage types /801 and /802. Which personnel calcula on rules are accessed by XPPF?
B. XPPO and XPP1

79. You changed the Organiza onal Assignment infotype (IT0001) a er a produc ve payroll run. What happens in the
next payroll run?
C. A payroll retroac ve calcula on occurs.

80. What modifier do you use to group employees for constant valua on (V_T510J) in rule XMOD?
D. MODIF 2

81. You want to propose a default value for the Pay scale type and Pay scale area (IT 0008) data fields. How can you
achieve this?

A. Use the table V_T510 (TARIF table).

82. Some personnel numbers in the payroll are rejected, while others are subject to master data changes in the
correc on phase. How does the system recalculate these personnel numbers' payroll results in the next payroll run?
B. The indicator is set in infotype 0003 (Payroll Status).

83. What does opera on MULTI RAA do?

C. Mul ply the value of the rate field by the value of the amount field and store the result in the amount field.

84. Which opera ons would you use in a personnel calcula on rule (PCR) called by func on PIT (Process the IT table) to
reduce the amount of a wage type by 10% and also retain it for further processing?

A. AMT 0.90 ADDWT*

85. Which func on/parameter combina on must you ac vate in a produc ve payroll schema?

D. CHECK/ABR

86. Where do you define the me/measurement unit for a wage type?
B. Wage type characteris cs

89. Which func on does the new average processing perform?

D. AVERA
90. You want to use rule Z123 to process only wage type 1200 in the results table (RT). The processing will differ for
hourly and salary employees. How do you call the rule?
D. PRT Z123 1200 <blank>