Scribd
Upload
590 views1 page

Tsks

The document provides technical data for TSK and TLK membrane couplings, including ratings, torque, maximum speed, and weights for various coupling sizes. It also outlines dimensional data such as distance between shaft ends and maximum bores for each coupling size. Additionally, it notes that certain coupling sizes are non-preferred and suggests selecting TLK couplings when possible.

Uploaded by

employment.kasco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
590 views1 page

Tsks

The document provides technical data for TSK and TLK membrane couplings, including ratings, torque, maximum speed, and weights for various coupling sizes. It also outlines dimensional data such as distance between shaft ends and maximum bores for each coupling size. Additionally, it notes that certain coupling sizes are non-preferred and suggests selecting TLK couplings when possible.

Uploaded by

employment.kasco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

T SERIES

Membrane Couplings Types TSK & TLK

TSK Technical Data


Rating Torque Max Weight Weight Unbored Hubs
Coupling Speed Transmission Unit
Size kW/1000 Continuous Peak Min. DBSE Extra DBSE Standard Large Long
rpm Nm Nm rpm Kg Kg/m Kg Kg Kg
0013 13 125 310 25,500 1.4 3.2 0.9 1.8 -
0033 33 315 790 20,000 2.7 5.3 1.6 3.1 -
0075 75 715 1,800 16,500 5.1 6.8 3.4 5.7 3.7
0135 135 1,290 3,200 144,500 8.9 11 5.6 8.8 6.7
0230 230 2,200 5,500 12,000 12.8 13.1 8.8 13.9 11.1
0350 350 3,350 8,400 10,500 16 12.5 15.7 - 18.8
0500 500 4,780 12,000 9,500 20.1 15.7 20.6 - 26.2
0740 740 7,070 17,700 8,000 25.4 19.8 29.4 - 37.2
0930 930 8,880 22,200 7,000 32.6 23.4 37.9 - 50.3
1400 1,400 13,370 33,400 6,000 46.2 31.4 51.8 - 72.5
Note: The coupling sizes shaded are non preferred, and TLK couplings should be selected whenever possible.
For a complete coupling, weights of two appropriate hubs plus a transmission unit are required
Unless otherwise specified, parallel bores will be machined to an IT 7 tolerance, with Js9 key-ways to DIN 6885, BS 4235 or BS 46 Pt1 (inch)

TSK Typical Arrangement

OVERLOAD COLLAR

GUARD RING

ANTI-FLY FEATURE

A C A

D
B ‡
STANDARD LARGE
MAX. HUB HUB MAX. E
BORE BORE

‡ To Suit Specific Applications

TSK Dimensional Data


Coupling Distance Between Shaft Ends (DBSE) Maximum Bores
Size A B C - Preferred * D E Standard Large
Min. In. In. In. Max. Hub** Hub**
0013 40 86 66 3.5 100 5.0 140 7.0 180 - 54 - 36 51
0033 45 105 79 3.5 100 5.0 140 7.0 180 - 69 - 46 70
0075 55 130 99 5.0 140 7.0 180 250 90 82 65 90
0135 62 152 121 140 7.0 180 250 112 104 80 102
0230 70 179 130 140 7.0 180 250 131 123 90 121
0350 90 197 131 180 250 163 116 115 -
0500 95 222 133 180 250 181 132 127 -
0740 107 247 138 180 250 206 151 140 -
0930 115 272 148 180 250 223 166 155 -
1400 130 297 171 180 250 248 180 172 -
Dimensions should not be used for construction. Certified dimensions furnished upon request.
NOTES: * These DBSE sizes are more readily available. Other lengths to suit specific shaft separations are available on request.
** Maximum bores shown are based on standard DIN/BS rectangular keys.

You might also like