Coding list Golf 8

Any modification
at your own risk!
If the translation is not correct here and there, feel free to send me your suggestions for improvement.
Contact and feedback: Facebook
German: Link

1. Coding’s ..................................................................................................................................................................... 6
1.1 Tested: .............................................................................................................................................................. 6
1.1.1 Brake disk drying adjustment [SFD: yes] ................................................................................................... 6
1.1.2 Adjust ESC settings [SFD: yes] ................................................................................................................... 6
1.1.3 Save Air-Care setting [SFD: no] ................................................................................................................. 6
1.1.4 Automatically reduce seat heating to a lower level after a certain time [SFD: no] .................................. 7
1.1.5 Save recirculation setting [SFD: no] .......................................................................................................... 7
1.1.6 Enable fan levels „gentle“, „medium“ and „intensive“ [SFD: no] ............................................................. 7
1.1.7 Adjust seat heating temperatures [SFD: no] ............................................................................................. 7
1.1.8 Save seat heating settings [SFD: no] ......................................................................................................... 8
1.1.9 Deactivate steering wheel heater permanently [SFD: no]........................................................................ 8
1.1.10 Change light functions based on light sensitivity [SFD: yes] ..................................................................... 8
1.1.11 Save high beam assistant settings (on ignition change) [SFD: yes] .......................................................... 8
1.1.12 Activate adjustable daytime running lights in the car menu [SFD: yes] ................................................... 8
1.1.13 Dim ambient lighting to a higher level [SFD: yes] ..................................................................................... 8
1.1.14 Adjustable DWA acknowledgement ton in the car menu (lock and unlock) [SFD: yes] ........................... 9
1.1.15 Enable automatic central locking (while driving) in the car menu [SFD: yes]........................................... 9
1.1.16 Deactivate warning sound when opening the door with ignition [SFD: yes] ........................................... 9
1.1.17 light strip (between the headlights) and Rear lights as daytime running lights [SFD: yes] ...................... 9
1.1.18 Deactivate rear windows wiper intermittent wipe function [SFD: yes] ................................................... 9
1.1.19 Automatic door unlocking when DSG is in park position [SFD: yes] ......................................................... 9
1.1.20 Adjust Coming Home Lights [SFD: yes] ..................................................................................................... 9
1.1.21 Deactivate ignition active warning when the engine is running/door is open [SFD: yes] ........................ 9
1.1.22 Switch central locking with key even when ignition is on [SFD: yes]...................................................... 10
1.1.23 Disable warning that the lights are turned off [SFD: yes] ....................................................................... 10
1.1.24 Open Trunk with Vehicle Key [SFD: yes] ................................................................................................. 10
1.1.25 Adjust seat ventilation [SFD: yes] ........................................................................................................... 10
1.1.26 Comfort opening of windows via door handles [SFD: yes] ..................................................................... 10
1.1.27 Parking lights on both sides [SFD: yes] ................................................................................................... 11

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 1
 1.1.28 Activate cruise control (No distance regulation) [SFD: no] [Login Code: 20103] ................................... 11
1.1.29 Disable prevention of overtaking on the right (ACC) [SFD: no] [Login Code: 20103] ............................. 11
1.1.30 Adjust ACC 1 km/h increments [SFD: no] [Login Code: 20103] .............................................................. 11
1.1.31 Change max speed of the speedometer [SFD: yes] ................................................................................ 11
1.1.32 Customize logo in the AID (Active Info Display [SFD: no] ....................................................................... 11
1.1.33 Additional view in the AID (Active Info Display) [SFD: no] ...................................................................... 12
1.1.34 Golf 8 GTE (Hybrid) view in the AID (Active Info Display) [SFD: no] ....................................................... 12
1.1.35 Golf 8 GTI view in the AID (Active Info Display) [SFD: no] ...................................................................... 12
1.1.36 Golf 8 R view in the AID (Active Info Display) [SFD: no].......................................................................... 13
1.1.37 Off-road view in the AID (Active Info Display) [SFD: no]......................................................................... 13
1.1.38 Activate steering angle display in the AID info window [SFD: yes] ......................................................... 14
1.1.39 Activate boost pressure display in the AID info window [SFD: yes] ....................................................... 14
1.1.40 Activate G-force display in the AID info display window [SFD: yes] ....................................................... 14
1.1.41 Activate torque display in the AID info display window [SFD: yes] ........................................................ 14
1.1.42 Activate engine power display in the AID info display [SFD: yes] ........................................................... 14
1.1.43 Activate transmission temperature display in the AID info window [SFD: yes] ..................................... 14
1.1.44 Lap timer with lap counter [SFD: yes] ..................................................................................................... 14
1.1.45 Activate refuelling amount in the AID (Active Info Display) [SFD: no] .................................................... 15
1.1.46 Compass Display in the AID Info Window [SFD: no] ............................................................................... 15
1.1.47 Disable beeping when engaging reverse gear (DSG in „R“) [SFD: no] .................................................... 15
1.1.48 Disable animation when switching AID displays [SFD: yes] .................................................................... 15
1.1.49 Change outside temperature warning threshold in the AID (Active Info Display) [SFD: no] .................. 15
1.1.50 Deactivate seatbelt warning [SFD: yes] .................................................................................................. 15
1.1.51 Deactivate start-stop system [SFD: yes] ................................................................................................. 15
1.1.52 Automatic opening/closing of windows when opening/closing door [SFD: no] .................................... 16
1.1.53 Activate puddle lights when the mirrors are folded in [SFD: no] ........................................................... 16
1.1.54 Activate acceleration measurement 0-100km/h, 80-120km/h and 1/4 mile [SFD: yes] ........................ 16
1.1.55 IQ-Light presentation on engine start [SFD: yes] .................................................................................... 16
1.1.56 Driving instructor mode [SFD: yes] ......................................................................................................... 17
1.1.57 Enable/Disable Harman/Kardon logo in the MIB3 boot logo [SFD: yes] ................................................ 17
1.1.58 Adjust MIB3 boot logo [SFD: yes]............................................................................................................ 17
1.1.59 Disable login screen/user functions from the HMI [SFD: yes] ................................................................ 18
1.1.60 Enable Comp Improve Sound Quality without Harman/Kardon Sound System [SFD: yes] .................... 18
1.1.61 Deactivation of input blocking during driving in the navigation system [SFD: yes]................................ 18
1.1.62 Navigation map on both AID and infotainment display simultaneously [SFD: yes] ............................... 18
1.1.63 Enable/Disable AM Frequency Band in the Radio [SFD: yes].................................................................. 18
1.1.64 Adjust lane-keeping assistant intervention point [SFD: no] ................................................................... 19
1.1.65 Save lane-keeping assistant settings (on ignition change) [SFD: no] ...................................................... 19
1.1.66 Steering resistance adjustable via the Car Menu while Travel-Assist is active [SFD: no] ...................... 19

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 2
 1.1.67 Adjust or deactivate engine sound generator [SFD: no] ......................................................................... 19
1.1.68 Adjust start button illumination [SFD: no] [Login Code: 10587]............................................................. 19
1.1.69 Comfort open-close sunroof with remote control [SFD: no] .................................................................. 19
1.1.70 Maintain sunroof tilt angle while driving [SFD: no] ................................................................................ 19
1.2 Untested: ........................................................................................................................................................ 20
1.2.1 Activate Auto-Hold and related messages [SFD: yes] ☐ ........................................................................ 20
1.2.2 Adjust Blower Tuning [SFD: no] ☐ ......................................................................................................... 20
1.2.3 Deactivate online unlocking of the central locking [SFD: yes] ☐ .......................................................... 20
1.2.4 Keep lights off as it gets dark [SFD: yes] ☐ ........................................................................................... 20
1.2.5 Activate opening the tailgate with the foot when the ignition is on [SFD: yes] ☐ ................................ 20
1.2.6 Activate foot opening of the tailgate with the engine running [SFD: yes] ☐......................................... 20
1.2.7 30 ambient colours [SFD: yes] ☐........................................................................................................... 21
1.2.8 Change the ambient colour assignment for the driving profiles [SFD: yes] ☐....................................... 22
1.2.9 Enable rear windshield wiper activation automatically [SFD: yes] ☐ .................................................... 22
1.2.10 Change timing of upcoming service notification [SFD: no] ☐ ............................................................... 22
1.2.11 Allow connecting multiple smartphones [SFD: yes] ☐........................................................................... 23
1.2.12 Disable restrictions with Android Auto [SFD: yes] ☐ ............................................................................. 23
1.3 No function or changes: ................................................................................................................................. 24
1.3.1 Display ventilation level in „Auto“ mode [SFD: no] ................................................................................ 24
1.3.2 Deactivate light strip (between the headlights) [SFD: yes]..................................................................... 24
1.3.3 Make the turn signals flash when locking and unlocking the vehicle [SFD: yes] .................................... 25
1.3.4 Adjust coming home and leaving home [SFD: yes] ................................................................................. 25
1.3.5 Coming home and leaving home also during the day (light switch position on “Auto”) [SFD: yes] ....... 25
1.3.6 Adjust automatic activation temperatures of the steering wheel heater [SFD: yes] ............................. 25
1.3.7 Deactivate daytime running lights when the parking brake is engaged [SFD: yes] ................................ 25
1.3.8 Automatically close open windows when locking the vehicle [SFD: yes] ............................................... 25
1.3.9 Automatic locking (if forgetting to lock the car) [SFD: yes] .................................................................... 26
1.3.10 Curve assistant adjustable in the car menu for ACC [SFD: no] [Login Code: 20103] .............................. 26
1.3.11 Speed limiter adjustable in the car menu for ACC [SFD: no] [Login Code: 20103] ................................. 26
1.3.12 Torque distribution display in the AID info window [SFD: yes] .............................................................. 27
1.3.13 Display driving profile in the AID (Active Info Display) [SFD: yes]........................................................... 27
1.3.14 Extended scales in the speedometer [SFD: no] ...................................................................................... 27
1.3.15 Deactivate easy entry [SFD: no] .............................................................................................................. 27
1.3.16 GPS Lap timer [SFD: yes] ......................................................................................................................... 28
1.3.17 Display images from USB stick [SFD: yes] ............................................................................................... 28
1.3.18 Off-road monitor in the HMI [SFD: yes] .................................................................................................. 28
1.3.19 Welcome tone [SFD: yes] ........................................................................................................................ 29
1.3.20 Connect Bluetooth headphones [SFD: yes] ............................................................................................ 29
1.3.21 Enable garage door opener [SFD: yes] .................................................................................................... 29

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 3
 1.3.22 Disable user selection (privacy always active) [SFD: yes] ....................................................................... 29
1.3.23 Lane-keeping assist intervention point adjustable in the car menu [SFD: no] ....................................... 29
1.3.24 Activate lane-keeping assist below 60km/h [SFD: no] ............................................................................ 30
1.3.25 Display lap timer on the head-up display [SFD: no] ................................................................................ 30
2 Retrofits................................................................................................................................................................... 31
2.1 RDKS [SFD: yes] ............................................................................................................................................... 31
2.2 45-watt USB module [SFD: no] ....................................................................................................................... 32
2.3 Golf 8 R mode button on the steering wheel [SFD: yes]................................................................................. 33
2.4 Frameless interior mirror ................................................................................................................................ 35
2.5 Active lane change assistant [SFD: yes] .......................................................................................................... 36
2.6 Retrofitting the facelift entry lights (puddle lights) ........................................................................................ 37
2.7 Unverified retrofits, coding’s for some retrofits ............................................................................................. 38
2.7.1 Retrofitting light strip [SFD: yes] ............................................................................................................. 38
2.7.2 Rear view camera [SFD: yes] ................................................................................................................... 39
2.7.3 Connect/Code the valve exhaust system to the engine control unit [SFD: ???] .................................... 39
2.7.4 Electric exterior mirrors [SFD: yes] ......................................................................................................... 39
2.7.5 Trailer hitch [SFD: yes] ............................................................................................................................ 40
2.7.6 Retrofit Travel assist [SFD: yes] ............................................................................................................... 41
2.7.7 Wireless CarPlay / Android Auto [SFD: yes] ............................................................................................ 41
2.7.8 Blindspot [SFD: yes]................................................................................................................................. 42
2.7.9 Rain sensor [SFD: yes] ............................................................................................................................. 42
2.7.10 Rear door handles for Kessy [SFD: yes] ................................................................................................... 43
3 Unlocking VIM (Video in Motion) [SFD: yes] ........................................................................................................... 44
4 Changing comfort turn signal cycles to 2 - 5 [SFD: yes] .......................................................................................... 46
5 Start-Stop memory module .................................................................................................................................... 48
5.1 Option 1 (Memory module for the Golf 7 platform) ...................................................................................... 48
5.2 Option 2 (Memory module for the Golf 8 platform) ...................................................................................... 48
5.3 Option 3 (Coding) ............................................................................................................................................ 49
6 Calculate CRC32 checksum ..................................................................................................................................... 50
7 Modifications .......................................................................................................................................................... 51
7.1 Enhancing Harman/Kardon OEM subwoofer.................................................................................................. 51
7.2 Sunglasses compartment for the center console ........................................................................................... 53
8 Maintenance ........................................................................................................................................................... 54
8.1 Releasing the rear electronic brake [SFD: yes] ............................................................................................... 54
8.2 New battery calibration [SFD: yes] ................................................................................................................. 54
8.3 Replace the windshield wipers ....................................................................................................................... 54
8.4 Adjusting the Front Camera After Lowering [SFD: yes] .................................................................................. 55
8.5 DCC Retraining After Lowering [SFD: no] ........................................................................................................ 55
8.6 Key battery replacement ................................................................................................................................ 56

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 4
9 Hidden menu’s ........................................................................................................................................................ 57
9.1 Service menu instrument cluster (Reset service): .......................................................................................... 57
9.2 Service Menu Infotainment System (MIB3) (For Software Update): .............................................................. 58
9.3 Exit Software Update Menu ............................................................................................................................ 58
9.4 Restart MIB3 ................................................................................................................................................... 58
10 MIB3-Updates ......................................................................................................................................................... 59
10.1 Offline Navigation Map Update (without WeConnect) .................................................................................. 59
10.2 Radio station data update (Only for European vehicles) ................................................................................ 60
10.3 MIB3 System updates ..................................................................................................................................... 61
11 Activate launch control ........................................................................................................................................... 63
12 Software updates (23.08.2024) .............................................................................................................................. 64
13 Changelog................................................................................................................................................................ 65
14 General Note’s ........................................................................................................................................................ 65
15 Detonations............................................................................................................................................................. 65

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 5
1. Coding’s
1.1 Tested:
1.1.1 Brake disk drying adjustment [SFD: yes]
Control unit 03 [Tested SW: 0135-0136]
Adjustments:
Brake_disc_dehydration:
Brake_disc_dehydration: medium (weak, medium, strong)

1.1.2 Adjust ESC settings [SFD: yes]

Control unit 03 [Tested SW: 0136]
Coding:
Byte 26 Bit 1-4
ASR off / ESC off:
Bit 1 disabled Bit 2 disabled Bit 3 enabled Bit 4 disabled

ASR off/ESC Sport:

Bit 1 disabled Bit 2 enabled Bit 3 disabled Bit 4 disabled

ESC Sport/ESC off:

Bit 1 disabled Bit 2 disabled Bit 3 enabled Bit 4 enabled

ASR off:
Bit 1 enabled Bit 2 disabled Bit 3 disabled Bit 4 disabled

ESC-Sport:
Bit 1 enabled Bit 2 disabled Bit 3 disabled Bit 4 enabled

(ASR = Traction Control System)

1.1.3 Save Air-Care setting [SFD: no]

Control unit 08 [Tested SW: 0440-0531]
Adjustments:
Filtering_interior_air_saving:
Filtering_interior_air_saving: not_active
(Will not be stored)
depending_on_standing_time
(Stored depending on standing time)
active
(Will be stored)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 6
1.1.4 Automatically reduce seat heating to a lower level after a certain time [SFD: no]
Control unit 08 [Tested SW: 0440-0531]
Adjustments:
Time for seat heating power reduction Level 3 to level 2:
param_Time_for_seat_heating_power_reduction_Level_3_to_level_2: 0 min
(From level 3 to level 2 after X minutes, adjust value as desired, 0 = off)
Time for seat heating power reduction Level 2 to level 1:
param_Time_for_seat_heating_power_reduction_Level_2_to_level_1: 0 min
(From level 2 to level 1 after X minutes, adjust value as desired, 0 = off)

1.1.5 Save recirculation setting [SFD: no]

Control unit 08 [Tested SW: 0440-0531]
Adjustments:
Save air recirculation status at terminal 15 off:
Save air recirculation status at terminal 15 off: Do_not_store
(Will not be stored)
resttime_dependent_storage
(Stored depending on standing time)
storing
(Will be stored)

1.1.6 Enable fan levels „gentle“, „medium“ and „intensive“ [SFD: no]
Control unit 08 [Tested SW: 0462-0531]
Adjustments:
Climate_style:
Climate_style: display

1.1.7 Adjust seat heating temperatures [SFD: no]

Control unit 08 [Tested SW: 0531]
Adjustments:
Seat_Heating_Level_Adaptation:
Seat_heating_stage_1_lower_threshold: 20,0 [UN]_°C (stage 1)
Seat_heating_stage_1_upper_threshold: 20,5 [UN]_°C (stage 1)
Seat_heating_stage_2_lower_threshold: 20,0 [UN]_°C (stage 1)
Seat_heating_stage_2_upper_threshold: 20,5 [UN]_°C (stage 1)
Seat_heating_stage_3_lower_threshold: 33,0 [UN]_°C (stage 2)
Seat_heating_stage_3_upper_threshold: 33,5 [UN]_°C (stage 2)
Seat_heating_stage_4_lower_threshold: 33,0 [UN]_°C (stage 2)
Seat_heating_stage_4_upper_threshold: 33,5 [UN]_°C (stage 2)
Seat_heating_stage_5_lower_threshold: 50,0 [UN]_°C (stage 3)
Seat_heating_stage_5_upper_threshold: 50,5 [UN]_°C (stage 3)
Seat_heating_stage_6_lower_threshold: 50,0 [UN]_°C (stage 3)
Seat_heating_stage_6_upper_threshold: 50,5 [UN]_°C (stage 3)
(Adjust values as desired. "lower" is the activation temperature, and "upper" is the deactivation temperature.)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 7
1.1.8 Save seat heating settings [SFD: no]
Control unit 08 [Tested SW: 0440-0531]
Adjustments:
Für die Fahrerseite:
Seat heating level driver side, saving condition:
param_Seat_heating_level_driver_side,_saving_condition: not_active
(Will not be stored)
10_minutes_activ
(Will be stored for 10
minutes)
active
(Last configuration will be
stored)
Für die Beifahrerseite:
Seat heating level passenger side, saving condition:
param_Seat_heating_level_passenger_side,_saving_condition: not_active
(Will not be stored)
10_minutes_activ
(Will be stored for 10
minutes)
active
(Last configuration will be
stored)
1.1.9 Deactivate steering wheel heater permanently [SFD: no]
Control unit 08 [Tested SW: 0440-0531]
Coding:
Heated_steering_wheel_and_Heated_steering_wheel_automatic_mode: not_installed

1.1.10 Change light functions based on light sensitivity [SFD: yes]

Control unit 09 [Tested SW: 0159-0161]
Adjustments:
Lighting_Assist_Adaptation:
Lichtsensorempfindlichkeit: normal (Adjust as desired)

1.1.11 Save high beam assistant settings (on ignition change) [SFD: yes]
Control unit 09 [Tested SW: 0159-0161]
Adjustments:
Fernlicht_assistent:
Fernlichtassistent Reset: not_active

1.1.12 Activate adjustable daytime running lights in the car menu [SFD: yes]
Control unit 09 [Tested SW: 0159-0183]
Adjustments:
Tagfahrlicht:
Tagfahrlicht Aktivierung durch BAP oder Bedienfolge moeglich: active

1.1.13 Dim ambient lighting to a higher level [SFD: yes]

Control unit 09 [Tested SW: 0159-0161]
Adjustments:
Suchbeleuchtung_allgemein:
KL58 Einschalten mit Rampe: active

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 8
1.1.14 Adjustable DWA acknowledgement ton in the car menu (lock and unlock) [SFD: yes]
Control unit 09 [Tested SW: 0159-0161]
Adjustments:
ZV Quittierungen:
Quittungston_hmi_einstellbar: active
Quittierungston_bei_entriegeln: active
Quittungs_ton_bei_verriegeln: active

Only if there is no alarm system or acknowledgment tone through the horn:

Quittungston_ueber_hupe: active
Quittierton_beim_zweiten_ZV_ZU_Befehl: not_active

1.1.15 Enable automatic central locking (while driving) in the car menu [SFD: yes]
Control unit 09 [Tested SW: 0159-0183]
Adjustments:
ZV_Autolock:
ZV_autolock_autounlock_hmi: adjustable

1.1.16 Deactivate warning sound when opening the door with ignition [SFD: yes]
Control unit 09 [Tested SW: 0159-0161]
Adjustments:
Clamp_Control:
Ignition_Active_Message: No_display

1.1.17 light strip (between the headlights) and Rear lights as daytime running lights [SFD: yes]
Control unit 09 [Tested SW: 0161]
Adjustments:
Tagfahrlicht:
Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht: active

1.1.18 Deactivate rear windows wiper intermittent wipe function [SFD: yes]
Control unit 09 [Tested SW: 0161]
Adjustments:
Heckwischer_steuerung:
Traenenwischen Heck: not_active

1.1.19 Automatic door unlocking when DSG is in park position [SFD: yes]
Control unit 09 [Tested SW: 0161]
Adjustments:
ZV_Autolock
automatic_unlock_nar: active

1.1.20 Adjust Coming Home Lights [SFD: yes]

Control unit 09 [Tested SW: 0161]
Adjustments:
BAP_Funktionsstatus:
Coming_home_Leuchten: Abblendlicht or Nebellicht

1.1.21 Deactivate ignition active warning when the engine is running/door is open [SFD: yes]
Control unit 09 [Tested SW: 0161]
Adjustments:
Unterdrückung Zündungswarnung:
Ausgabe MoLaWa_AAW: not_active

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 9
1.1.22 Switch central locking with key even when ignition is on [SFD: yes]
Control unit 09 [Tested SW: 0161]
Adjustments:
ZV allgemein:
Funk_bei_Kl15_ein: active

1.1.23 Disable warning that the lights are turned off [SFD: yes]
Control unit 09 [Tested SW: 0161]
Adjustments:
Fahrlichthinweis:
Fahrlicht_Hinweis_mehrfach: not_active
Fahrlichtwarnung_Hinweis_Konfig: kein_Hinweis

1.1.24 Open Trunk with Vehicle Key [SFD: yes]

Control unit 09 [Tested SW: 0161]
Adjustments:
ZV Heck:
Direktauswurf_heckdeckel: active
Note:
Trunk unlocked, and the latch opens. However, the tailgate does not pop open.

1.1.25 Adjust seat ventilation [SFD: yes]

Control unit 09 [Tested SW: 0161-0183]
Adjustments:
Sitzlüfterkennlinie:
Level_1_Sitz: 30 % (stage 1)
Level_1_Lehne: 30 % (stage 1)
Level_2_Sitz: 30 % (stage 1)
Level_2_Lehne: 30 % (stage 1)
Level_3_Sitz: 50 % (stage 2)
Level_3_Lehne: 50 % (stage 2)
Level_4_Sitz: 50 % (stage 2)
Level_4_Lehne: 50 % (stage 2)
Level_5_Sitz: 75 % (stage 3)
Level_5_Lehne: 75 % (stage 3)
Level_6_Sitz: 80 % (stage 3)
Level_6_Lehne: 80 % (stage 3)

1.1.26 Comfort opening of windows via door handles [SFD: yes]

Requirement: Door handles with built-in sensors (Kessy)
Control unit 09 [Tested SW: 0183]
Adjustments:
Kessyfunktion:
Komfortbedienung_fh_oeffnen_ueber_kessy active

ZV Komfort_Fensterheber:
Komfortbedienung_fh_oeffnen_ueber_sz active
Komfort_oeffnen
active
Control unit B7 [Testet SW: 0725] [Login Code: 10587]
Adjustments:
Passive_Komfort:
Passive_Komfort_Oeffnen_aktiv: activated
Passive_Komfort_Togglen_aktiv: activated

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 10
1.1.27 Parking lights on both sides [SFD: yes]
Control unit 09 [Tested SW: 0161]
Adjustments:
Standlicht:
Parklicht ueber LSS aktiviert: dual sided

1.1.28 Activate cruise control (No distance regulation) [SFD: no] [Login Code: 20103]
Control unit 13 [Tested SW: 0395]
Coding:
Cruise_control_mode: activated

1.1.29 Disable prevention of overtaking on the right (ACC) [SFD: no] [Login Code: 20103]
Control unit 13 [Tested SW: 0395]
Coding:
Overtaking_right_prevention: deactivated

1.1.30 Adjust ACC 1 km/h increments [SFD: no] [Login Code: 20103]
Control unit 13 [Tested SW: 0395]
Coding:
Operation_mode: Operation_mode_2
(Tap +/- 1 km/h, press a little longer for +/- 10 km/h)

1.1.31 Change max speed of the speedometer [SFD: yes]

Control unit 17 [Tested SW: 3460-3470]
Adjustments:
Speedometer_final_value:
Speedometer_final_value: variant_0 = 260km/h
variant_1 = 280 km/h
variant_2 = 240 km/h
variant_3 = 300 km/h
variant_4 = 320 km/h
1.1.32 Customize logo in the AID (Active Info Display [SFD: no]
Control unit 17 [Tested SW: 3460-3470]
Adjustments:
Logo:
logo: no_Logo = no logo

Logo_1 = R

Logo_2 = R-Line

Logo_3 = GTE

Logo_4 = GTI

Logo_5 = GTD

Some logos only appear in the Golf 8 R view starting from a speedometer with part number 5H0920340B!

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 11
1.1.33 Additional view in the AID (Active Info Display) [SFD: no]
Control unit 17 [Tested SW: 3460-7380]
Adjustments:
Unlock_views:
view_6: active

1.1.34 Golf 8 GTE (Hybrid) view in the AID (Active Info Display) [SFD: no]
Control unit 17 [Tested SW: 3460-7380]
Adjustments:
Unlock_views:
view_7: active

1.1.35 Golf 8 GTI view in the AID (Active Info Display) [SFD: no]
Control unit 17 [Tested SW: 1400-7380]
Adjustments:
Unlock_views:
view_8: active

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 12
1.1.36 Golf 8 R view in the AID (Active Info Display) [SFD: no]
Control unit 17 [Tested SW: 3460-7380]
Adjustments:
unlock_views:
view_9: active

1.1.37 Off-road view in the AID (Active Info Display) [SFD: no]
Control unit 17 [Tested SW: 3460-3470] 5H0920340 - 5H0920340B
Adjustments:
Unlock_views:
view_10: active

From part number 5H0920340C [Tested SW: 7360-7380]

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 13
1.1.38 Activate steering angle display in the AID info window [SFD: yes]
Control unit 17 [Tested SW: 3460-3470]
Adjustments:
Offroad:
Offroad : yes
(May need to be activated in the AID menu)

1.1.39 Activate boost pressure display in the AID info window [SFD: yes]
Control unit 17 [Tested SW: 1400-7380] (not GTE)
Adjustments:
Displayable_content_configuration:
Boost_Pressure: active
(May need to be activated in the AID menu)

1.1.40 Activate G-force display in the AID info display window [SFD: yes]
Control unit 17 [Tested SW: 3460-7380]
Adjustments:
Displayable_content_configuration:
G_Meter: active
(May need to be activated in the AID menu)

1.1.41 Activate torque display in the AID info display window [SFD: yes]
Control unit 17 [Tested SW: 1400-7380] (not GTE)
Adjustments:
Displayable_content_configuration:
Engine_Torque: active
(May need to be activated in the AID menu)

1.1.42 Activate engine power display in the AID info display [SFD: yes]
Control unit 17 [Tested SW: 1400-7380] (not GTE)
Adjustments:
Displayable_content_configuration:
Engine_Power: active
(May need to be activated in the AID menu)

1.1.43 Activate transmission temperature display in the AID info window [SFD: yes]
Control unit 17 [Tested SW: 3460-7380]
Adjustments:
Displayable_content_configuration:
Transmission_Temperature: active
(May need to be activated in the AID menu)

1.1.44 Lap timer with lap counter [SFD: yes]

Control unit 17 [Tested SW: 3460-3470]
Coding:
Laptimer: yes

Lap counter in conjunction with the lap timer:

Adjustments:
Displayable_content_configuration:
Laptimer: active

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 14
1.1.45 Activate refuelling amount in the AID (Active Info Display) [SFD: no]
Control unit 17 [Tested SW: 1400-7380]
Coding:
Refuel_volume: yes
(May need to be activated in the AID menu)

1.1.46 Compass Display in the AID Info Window [SFD: no]

Control unit 17 [Tested SW: 1400-7380]
Coding:
navigation_compass: yes

1.1.47 Disable beeping when engaging reverse gear (DSG in „R“) [SFD: no]
Control unit 17 [Tested SW: 3460-3470]
Adjustments:
Acoustics_driving_position_R:
Acoustics_driving_position_R: not_active
(Only works after ignition change, apparently no longer with newer software versions)

1.1.48 Disable animation when switching AID displays [SFD: yes]

Control unit 17 [Tested SW: 3470]
Adjustments:
Locking_display_content:
Locking_decoration_animation: yes

1.1.49 Change outside temperature warning threshold in the AID (Active Info Display) [SFD: no]
Control unit 17 [Tested SW: 3460-3470]
Adjustments:
outside_temperature:
p_ice_warning_exit_temperature: 6° (Adjust as desired, maximum 10°C)
p_ice_warning_entry_temperature: 4° (Adjust as desired, maximum 10°C)
p_storage_time_engine_off: 180 (Adjust as desired, Warning appears
again after restarting the engine)

1.1.50 Deactivate seatbelt warning [SFD: yes]

Control unit 17 [Tested SW: 1400-7380]
Adjustments:
Deactivate_belt_warning:
State: yes

1.1.51 Deactivate start-stop system [SFD: yes]

Control unit 19 [Tested SW: 7084-7312]
Adjustments:
Slave_component_list:
Battery Monitoring Control Module: no
Notice:
Does not work on vehicles with a 45V electrical system.
Also, an error remains in the gateway:
„Subsystem_multiple_plug_identified“
No error message appears in the AID or infotainment system.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 15
1.1.52 Automatic opening/closing of windows when opening/closing door [SFD: no]
Control unit 42 [Tested SW: 0330-0350]
Coding:
short_drop: active
Control unit 52 [Tested SW: 0330-0350]
Coding:
short_drop: active

1.1.53 Activate puddle lights when the mirrors are folded in [SFD: no]
Control unit 42 [Tested SW: 0330]
Coding:
turn_off_front_field_light_with_folded_mirror: not_active

Control unit 52 [Tetested SW: 0330]

Coding:
turn_off_front_field_light_with_folded_mirror: not_active

1.1.54 Activate acceleration measurement 0-100km/h, 80-120km/h and 1/4 mile [SFD: yes]
Control unit 4B [Tested SW: 1447]
Coding:
Function_activation_speed_up_measuring: activated
Speed_up_measuring_0_to_100_km_per_h: activated
Speed_up_measuring_80_to_120_km_per_h: activated
Time_measuring_for_0_to_QuaterMile: activated
Control unit 17 [Tested SW: 5350-7380]
Adjustments:
Displayable_content_configuration:
Acceleration_measurement: display

Attention: It only works with a speedometer with part number 5H0920340B

A basic adjustment of the matrix LED headlights may be necessary!

1.1.55 IQ-Light presentation on engine start [SFD: yes]

Control unit 4B [Tested SW: 1447]
Adjustments:
Präsentationslauf_dynamisches_Kurvenlicht:
Präsentationslauf_dynamisches_Kurvenlicht: aktiv
Reference_Run_Start_Condition:
Reference_Run_Start_Condition: Motorstart (Alternatively, “Klemme 15”
when turning on the ignition)
Reference_Run_Activation_Effect:
par_Reference_Run_Activation_Effect: Activation effect enabled by mtor start
Note:
The control unit must first be unlocked using SFD.
Only for vehicles equipped with IQ-Light.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 16
1.1.56 Driving instructor mode [SFD: yes]
Control unit 5F [Tested SW: 1899-1969]
Adjustments:
Car_Function_Adaptations:
menu_display_driving_school_over_threshold_high: activated
menu_display_driving_school: activated

1.1.57 Enable/Disable Harman/Kardon logo in the MIB3 boot logo [SFD: yes]
Control unit 5F [Tested SW: 1941]
Adjustments:
Startup_Screen_Sticker_HMI:
Startup_Screen_Sticker_HMI: 3 (0 = no logo, 3 = Harman/Kardon logo)

Golf 8 R boot logo Golf 8 GTI boot logo

Standard VW boot logo

1.1.58 Adjust MIB3 boot logo [SFD: yes]

Control unit 5F [Tested SW: 1941]
Adjustments:
function_configuration_hmi:
screenings: 3
(0 = VW, 2= GTD, 3 = GTI, 6 = R, 7 = R-Line, 8 = Alltrack)
0: 2:
1:
4:
5:
10:
11:

3: 6:

7: 8:

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 17
1.1.59 Disable login screen/user functions from the HMI [SFD: yes]
Control unit 5F [Tested SW: 1969]
Adjustments:
function_configuration_pso:
iaa_function: not activated
Note: All user functions will be deactivated, no shop, no updates.

1.1.60 Enable Comp Improve Sound Quality without Harman/Kardon Sound System [SFD: yes]
Control unit 5F [Tested SW: 1941-1969]
Adjustments:
function_configuration_sound:
brand_sound: Beats
Note: Whether the sound quality is truly better here is debatable. I have the impression that the
bass is a bit more intense here.

1.1.61 Deactivation of input blocking during driving in the navigation system [SFD: yes]
Control unit 5F [Tested SW: 1803-1969]
Adjustments:
Disabled_menu_contents:
FB_MEDIA_19: non_blocked
FB_MISC_14: non_blocked
FB_MISC_19: non_blocked
FB_MISC_18: non_blocked
FB_MISC_31: non_blocked
FB_MISC_29: non_blocked
FB_MISC_25: non_blocked
FB_MISC_33: non_blocked
FB_MISC_44: non_blocked
FB_MISC_41: non_blocked

1.1.62 Navigation map on both AID and infotainment display simultaneously [SFD: yes]
Control unit 5F [Tested SW: 1803-1969]
Adjustments:
Dashboard_Display_Configuration:
ability_switch_nav_maps: no
navigation_map_compression_mode: H264
navigation_map_resolution: 1
navigation_map_transmission_mode: IP_streaming
Alternatively:
navigation_map_resolution: 2
navigation_map_transmission_mode: MOST_High
(Works only after restarting the infotainment system)

1.1.63 Enable/Disable AM Frequency Band in the Radio [SFD: yes]

Control unit 5F [Tested SW: 1941-1969]
Adjustments:
function_configuration_radio:
AM_disable: deactivated

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 18
1.1.64 Adjust lane-keeping assistant intervention point [SFD: no]
Control unit A5 [Tested SW: 3129-3405]
Coding:
Point_of_intervention: early (intervenes early)
late (intervenes late)
early_setting_over_menu
(Intervenes early, no settings in the menu)
late_setting_over_menu
(Intervenes late, no settings in the menu)

1.1.65 Save lane-keeping assistant settings (on ignition change) [SFD: no]
Control unit A5 [Tested SW: 3129-3405]
Coding:
Configuration_for_lane_departure_warning_Kl15: last_setting

1.1.66 Steering resistance adjustable via the Car Menu while Travel-Assist is active [SFD: no]
Control unit A5 [Tested SW: 3129-3405]
Coding:
HC_Warn_Intensity: Setting_over_menu

1.1.67 Adjust or deactivate engine sound generator [SFD: no]

Control unit A9 [Tested SW: 0001]
Adjustments:
Loudness_actuator_for_structure_borne_sound: 0-100% (0 = off, 1-100% = volume)
1.1.68 Adjust start button illumination [SFD: no] [Login Code: 10587]
Control unit B7 [Tested SW: 0725]
Adjustments:
DevCod_ Search lights:
Suchbeleuchtung_ZAT_Beleuchtung_SES_Variante_aktiv: activated (LED = dim)
not_avtivated (LED = bright)
Suchbeleuchtung_ZAT_SES_Mode: activated (LED flashing)
not_activated (LED = on)

1.1.69 Comfort open-close sunroof with remote control [SFD: no]

Control unit CA [Tested SW: 0040]
Adjustments:
Control_unit_for_sun_roof_convenience_functions:
Convenience_opening_target_attitude: sliding_position

1.1.70 Maintain sunroof tilt angle while driving [SFD: no]

Control unit CA [Tested SW: 0040]
Adjustments:
Speed_dependent_control:
Sliding_sunroof_reduce_tilting_position: not_active

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 19
1.2 Untested:
1.2.1 Activate Auto-Hold and related messages [SFD: yes] ☐
Control unit 03 [Tested SW: 0136]
Coding:
Byte 21 Bit 6 enable

For the notification in the AID:

Byte 22 Bit 2 enable (Message: “Auto hold deactivated”)
Bit 5 enable (Green symbol for “Auto hold” in AID)
Bit 6 enable

1.2.2 Adjust Blower Tuning [SFD: no] ☐

Control unit 08 [Tested SW: from 0531]
Adjustments:
Blower_characteristic:
Blower_characteristic: normal tuning (standard)
tuning with little air (weaker)
tuning with more air in cooling operation (stronger)

1.2.3 Deactivate online unlocking of the central locking [SFD: yes] ☐

Control unit 09 [Tested SW: 0161]
Adjustments:
OCU:
Remote_Unlock_Lock: not_active

1.2.4 Keep lights off as it gets dark [SFD: yes] ☐

Control unit 09 [Tested SW: 0161]
Adjustments:
Licht_bedienung:
LTM_BGL_Wegabhängig: not_active
LTM_BGL_Geschwindigkeitsabhängig: not_active
LTM_BGL_Geschwindigkeitsabhängig_Parameter: not_active
LTM_GlobalOFF_Wegabhängig: not_active
LTM_GlobalOFF_Geschwindigkeitsabhängig: not_active
LTM_GlobalOFF_Geschwindigkeitsabhängig_Parameter: not_active
Beleuchtung_LTM_Auto_LED_58xt_logik: not_active
Beleuchtung_Auto_LED_bei_Nebelfunktion: not_active

1.2.5 Activate opening the tailgate with the foot when the ignition is on [SFD: yes] ☐
Control unit 09 [Tested SW: from 0174]
Adjustments:
Easy Open:
Virtuelles_Pedal_Aktiv_Kl_15: activated
Note:
Only from model year 2022, only Variant with electric tailgate.

1.2.6 Activate foot opening of the tailgate with the engine running [SFD: yes] ☐
Control unit 09 [Tested SW: from 0174]
Adjustments:
Easy Open:
Virtuelles_Pedal_Aktiv_Motorlauf: activated
Note:
Only from model year 2022, only Variant with electric tailgate.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 20
1.2.7 30 ambient colours [SFD: yes] ☐
Control unit 09 [Tested SW: 0161]
Adjustments:
Interior_light_general_settings:
Automatic_ambiance_lighting_with_fpa active

Interior_light_hmi_config:
Hmi_ambient_colors_bitmask 45140AD
Hmi_contour_colors_bitmask 45140AD
Hmi_ambient_colors_fod_bitmask 3FFFFFFF
Hmi_contour_colors_fod_bitmask 3FFFFFFF
Hmi_setup_set_1 13
Hmi_setup_set_2 7
Hmi_setup_set_3 15
Hmi_setup_set_4 5
Hmi_setup_members_set_1_byte_2 1C
Hmi_setup_members_set_2_byte_3 60
Hmi_setup_members_set_3_byte_3 10
Hmi_setup_members_set_4_byte_1 C
Hmi_setup_members_multi_color_byte_1 C
Hmi_setup_members_multi_color_byte_2 1C
Hmi_setup_members_multi_color_byte_3 70
Hmi_config_member_center_color_scheme_1 3
Hmi_config_member_center_bottom_color_scheme_1 3
Hmi_config_member_bottom_color_scheme_1 3
Hmi_config_member_center_color_scheme_3 3
Hmi_config_member_center_bottom_color_scheme_3 2
Hmi_config_member_bottom_color_scheme_3 2
Hmi_config_member_center_color_scheme_6 3
Hmi_config_member_center_bottom_color_scheme_6 2
Hmi_config_member_bottom_color_scheme_6 3
Hmi_config_member_center_color_scheme_8 3
Hmi_config_member_center_bottom_color_scheme_8 3
Hmi_config_member_bottom_color_scheme_8 2
Hmi_menu_ambient_lighting active
Hmi_ambient_color active
Hmi_contour_color active
Hmi_ambient_profile_1 active
Hmi_ambient_profile_2 active
Hmi_ambient_profile_3 active
Hmi_ambient_profile_4 active
Hmi_ambient_profile_5 active
Hmi_ambient_profile_6 active
Hmi_ambient_profile_7 active
Hmi_ambient_profile_8 active
Hmi_fpa_dependency active
Hmi_functional_ambience_lighting active
Hmi_play_of_colors active
Hmi_Display_Color_light_function 1

Interior_light_router_config:
Output_lin5_light_function_slave_3 7
Output_lin5_light_function_slave_4 8
Output_lin5_light_function_slave_8 17
Output_lin5_light_function_slave_9 18
Output_lin5_light_function_slave_11 4
Output_lin5_light_function_slave_12 5

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 21
 Output_lin9_light_function_slave_2 D
Output_lin9_light_function_slave_3 E
Output_lin9_light_function_slave_6 12
Output_lin9_light_function_slave_7 12
Output_lin10_light_function_slave_3 9
Output_lin10_light_function_slave_4 A
Output_lin10_light_function_slave_8 19
Output_lin10_light_function_slave_9 1A
Output_lin10_light_function_slave_11 4
Output_lin10_light_function_slave_12 5

Interior_light_functions_1_to_70:
Light_function_1 active
Light_function_4 active
Light_function_5 active
Light_function_7 active
Light_function_8 active
Light_function_9 active
Light_function_10 active
Light_function_13 active
Light_function_14 active
Light_function_18 active
Light_function_23 active
Light_function_24 active
Light_function_25 active
Light_function_26 active

1.2.8 Change the ambient colour assignment for the driving profiles [SFD: yes] ☐
Control unit 09 [Tested SW: 0161]
Adjustments:
Interior_light_general_settings:
Mapping_fpa_profile_1 (Light blue) 1 (1 = Profil „Comfort“)
Mapping_fpa_profile_2 (Blue) 5 (3 = Profil „Sport“)
Mapping_fpa_profile_3 (Red) 3 (4 = Profil „Offroad“)
Mapping_fpa_profile_4 (Lime) 4 (5 = Profil „Eco“)
Mapping_fpa_profile_5 (Violet) 2 (6 = Profil „Race“)
Mapping_fpa_profile_6 (Yellow) 7 (7 = Profil „Individual“)
(10 = Profil „Drift“)
(11 = Profil „Nürburgring“)

1.2.9 Enable rear windshield wiper activation automatically [SFD: yes] ☐

Control unit 09 [Tested SW: 0161]
Adjustments:
Heckwischer_steuerung:
Automatisches Heckwischen: active
Komofortwischen Heck Intervallpausenzeit Stufe Automatik: 7 [UN]_s
(Alter as desired)

1.2.10 Change timing of upcoming service notification [SFD: no] ☐

Control unit 17 [Tested SW: 3470]
Adjustments:
Service_early_warning_in_days:
time: 30d (Adjust as desired)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 22
1.2.11 Allow connecting multiple smartphones [SFD: yes] ☐
Control unit 5F [Tested SW: 1941]
Adjustments:
function_configuration_phone:
Support_second_phone: none (one, two, three)

1.2.12 Disable restrictions with Android Auto [SFD: yes] ☐

Control unit 5F [Tested SW: 1969]
Adjustments:
nhtsa_properties:
nhtsa_limitation_switches_for_androidauto_no_video_playback: not activated
nhtsa_limitation_switches_for_androidauto_no_text_input: not activated
nhtsa_limitation_switches_for_androidauto_no_setup_configuration: not activated
nhtsa_limitation_switches_for_androidauto_limit_displayed_message_length: not activated

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 23
1.3 No function or changes:
1.3.1 Display ventilation level in „Auto“ mode [SFD: no]
Control unit 08 [Tested SW: 0440-0531]
Adjustments:
Blower display during auto mode:
Blower display during auto mode: activated
(No changes to the display in the climate menu are noticeable)

1.3.2 Deactivate light strip (between the headlights) [SFD: yes]

Control unit 09 [Tested SW: 0159-0161]
Adjustments:

Until model year CW48 2020:

Leuchte 2 SL VL B20:
Lasttyp 2: not_active
Lampendefektbitposition 2: 0
Fehlerort mittleres Byte DTC-DFCC 2: 0
Lichtfunktion A 2: not_active
Dimmwert ABC 2: 0
Lichtfunktion D 2: not_active
Dimmwert DEF 2: 0

Leuchte 3 SL VR B32:
Lasttyp 3: not_active
Lampendefektbitposition 3: 0
Fehlerort mittleres Byte DTC-DFCC 3: 0
Lichtfunktion A 3: not_active
Dimmwert ABC 3: 0
Lichtfunktion D 3: not_active
Dimmwert DEF 3: 0

From model year CW48 2020:

Leuchte 31 AMBL 1 C61:
Lasttyp 31: not_active
Lampendefektbitposition 31: 0
Fehlerort mittleres Byte DTC-DFCC 31: 0
Lichtfunktion A 31: not_active
Dimmwert ABC 31: 0
Lichtfunktion D 31: not_active
Dimmwert DEF 31: 0

Leuchte 32 AMBL 2 C35:

Lasttyp 32: not_active
Lampendefektbitposition 32: 0
Fehlerort mittleres Byte DTC-DFCC 32: 0
Lichtfunktion A 32: not_active
Dimmwert ABC 32: 0
Lichtfunktion D 32: not_active
Dimmwert DEF 32: 0
(Anchored in dataset 09 -> Block 7203)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 24
1.3.3 Make the turn signals flash when locking and unlocking the vehicle [SFD: yes]
Control unit 09 [Tested SW: 0159-0161]
Adjustments:
Dynamisch Blinken:
ZV_Blinken_zu: active (oder not_active für deaktiviert)
ZV_Blinken_auf: active (oder not_active für deaktiviert)
(No changes recognizable)

1.3.4 Adjust coming home and leaving home [SFD: yes]

Control unit 09 [Tested SW: 0159-0161]
Adjustments:
Coming-Home_and_Leaving-Home:
Menueeinstellung CHO LHO: Menuesteuerung aktivieren

Coming-Home_and_Leaving-Home:
Menueeinstellung Leaving-home Zeit per BAP: 10 seconds (bis 90 sec)
Menueeinstellung Cominghome: 10 seconds (bis 90 sec)
Menueeinstellung Cominghome bei Tag: 10 seconds (bis 90 sec)
Menueeinstellung Leaving-home bei Tag: 10 seconds (bis 90 sec)
(No changes recognizable)

1.3.5 Coming home and leaving home also during the day (light switch position on “Auto”) [SFD: yes]
Control unit 09 [Tested SW: 0159-0161]
Adjustments:
Coming-Home_and_Leaving-Home:
Tagfahrlicht mit CHO bei Tag in Stellung AUTO: active
Tagfahrlicht mit LHO bei Tag in Stellung AUTO: active
(No changes recognizable)

1.3.6 Adjust automatic activation temperatures of the steering wheel heater [SFD: yes]
Control unit 09 [Tested SW: 0161]
Adjustments:
LIN-SMLS_konfig_1:
k_i_offset: 4 [UN]_°C (Below 4°C is considered cold, for example)
(Cannot be coded)

1.3.7 Deactivate daytime running lights when the parking brake is engaged [SFD: yes]
Control unit 09 [Tested SW: 0161]
Adjustments:
Tagfahrlicht:
Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten: active
(No changes recognizable)

1.3.8 Automatically close open windows when locking the vehicle [SFD: yes]
Control unit 09 [Getestet SW: 0161]
Adjustments:
ZV Komfort_Fensterheber:
Komfortschliessen_Brasilien not_active
BAP_komfortschließen_brasilien not_active

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 25
1.3.9 Automatic locking (if forgetting to lock the car) [SFD: yes]
Control unit 09 [Tested SW: 0161]
Adjustments:
Automatische_Funktionen:
Automatisches_Entriegeln_aktiv: activated
Automatisches_Verriegeln_aktiv: activated
AutomatischeFunktionen_Beschleunigtes_Entry_aktiv: activated
Automatik_Funktionen_Warnungen_aktiv: activated
AutomatikFunktionen_WarnungWenn_VerlassenBeiHautNichtGeschlossen_aktiv:
activated
AutomatikFunktionen_WarnungWennIDGeberImInnenraum_aktiv: activated

DevCod_Automatische_Verriegelung:
Klemme 15 Verhalten der Funktion Automatische Verriegelung Function only allowed for
terminal 15 on or off
AutomatikFunktionen_Sonderfall_ZyklischeSucheBeiKlemme15_aktiv: activated
Automatische_FunktionBeiAnnaeherung_Entfernung_aktiv: activated

DevCod_Nutzerkonfigurationen:
HMIMenue_Aktivierung_Nah_Mittel_Fern_aktiv: activated

Kessyfunktion:
Verriegeln_ueber_Toggle_nur_bei_Aussenhaut_geschlossen: active

Control unit B7 [Testet SW: 0725] [Login Code: 10587]

Adjustments:
Passive_Komfort:
Passive_Komfort_Oeffnen_aktiv: activated
Passive_Komfort_Togglen_aktiv: activated

DevCod_AutomatischeFunktionen:
Slowpolling_Rechtecksignal_Aktiv: activated
Only from a BCM index M and a modification of the dataset

1.3.10 Curve assistant adjustable in the car menu for ACC [SFD: no] [Login Code: 20103]
Control unit 13 [Tested SW: 0395]
Coding:
Curve_assistent_CarMenu: activated
(No changes recognizable)

1.3.11 Speed limiter adjustable in the car menu for ACC [SFD: no] [Login Code: 20103]
Control unit 13 [Tested SW: 0395]
Coding:
Speed_limit_assistent_CarMenu: activated
(No changes recognizable)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 26
1.3.12 Torque distribution display in the AID info window [SFD: yes]
Control unit 17 [Tested SW: 3460-3470]
Adjustments:
Displayable_content_configuration:
Torque_Distibution: active
(Display is present, but no functionality recognizable, probably only on Golf R)

1.3.13 Display driving profile in the AID (Active Info Display) [SFD: yes]
Control unit 17 [Tested SW: 3460-3470]
Adjustments:
Displayable_content_configuration:
Display_FPA: display
(No changes recognizable)

1.3.14 Extended scales in the speedometer [SFD: no]

Control unit 17 [Tested SW: 3460-3470]
Coding:
Tachometer_erweiterte_Skalenteilung: yes
(No changes recognizable)

1.3.15 Deactivate easy entry [SFD: no]

Control unit 36 [Getestet SW: 0362]
Coding:
Enabling_EasyEntry_front_seat_by_BCM not_active

Note:
It disables the function for the driver and passenger seats. Also, the setting option in the HMI is deactivated.
(No changes recognizable)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 27
1.3.16 GPS Lap timer [SFD: yes]
Control unit 4B [Tested SW: 1447]
Coding:
Gps_laptimer_round_route: not_activated
Gps_laptimer_distance_route: not_activated

(DO NOT CODE, otherwise you will have a blank display and won't be able to exit the menu!)
Tested with an instrument cluster 5H0920340A SW 3470

If you have coded it despite the warning, the automatic key assignment must be deactivated. To do this, go to the
infotainment system, select "User -> Setup -> Automatic Key Assignment," and disable this feature. After that,
restart the MIB, either by holding the "Power" button for about 20 seconds or locking the vehicle and waiting for 15
minutes.
If key assignment is still needed:
1. Re-enable the key assignment.
2. Lock the vehicle with key 1.
3. Unlock the vehicle with key 1.
4. Select the user.
5. Lock the vehicle with key 1 and wait for 15 minutes.
6. Repeat the same process with key 2.

1.3.17 Display images from USB stick [SFD: yes]

Control unit 5F [Tested SW: 1899-1941]
Adjustments:
function_configuration_media:
picture_viewer: on
(Cannot be successfully coded)

1.3.18 Off-road monitor in the HMI [SFD: yes]

Control unit 5F [Tested SW: 1941]
Adjustments:
Car_Function_Adaptations:
menu_display_compass_over_threshold_high: activated
menu_display_compass: activated

Car_Function_List_BAP:
compass_0x15_msg_bus: Databus_Infotainment
compass_0x15: activated
(Cannot be coded)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 28
1.3.19 Welcome tone [SFD: yes]
Control unit 5F [Tested SW: 1899-1941]
Adjustments:
function_configuration_audio:
welcome_sound: on
function_configuration_sound:
vehicle_leaving_sound: activated
vehicle_readiness_sound: activated

Control unit 47 [Tested SW: 4319]

Adjustments:
function_configuration_audio:
welcome_sound: on
(No changes recognizable)

1.3.20 Connect Bluetooth headphones [SFD: yes]

Control unit 5F [Tested SW: 1941]
Adjustments:
function_configuration_connectivity:
Bluetooth_Headphones: available
(Cannot be coded)

1.3.21 Enable garage door opener [SFD: yes]

Control unit 09 [Tested SW: 0161]
Adjustments:
UGDO:
ugdo_transmitter: installed
ugdo_via_mmi_configurable: active

Control unit 5F [Tested SW: 1941]

Adjustments:
Car_Function_List_BAP:
UGDO_0x14_msg_bus: activated
UGDO_0x14: clamp_15
Car_Function_Adaptations:
menu_display_ugdo_over_threshold_high: activated
menu_display_ugdo: activated

1.3.22 Disable user selection (privacy always active) [SFD: yes]

Control unit 5F [Tested SW: 1969]
Adjustments:
privacy_mode:
supress_privacy_mode: active
(It shows only a globe in the menu bar; the second icon no longer appears. No idea what else is happening in
the background.)

1.3.23 Lane-keeping assist intervention point adjustable in the car menu [SFD: no]
Control unit A5 [Tested SW: 3129-3405]
Coding:
Point_of_intervention: early_setting_over_menu
(No changes recognizable)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 29
1.3.24 Activate lane-keeping assist below 60km/h [SFD: no]
Control unit A5 [Tested SW: 3129-3405]
Coding:
Hc_variante: Variante_1
(No function below 60km/h)

1.3.25 Display lap timer on the head-up display [SFD: no]

Control unit 82 [Tested SW: 2032]
Adjustments:
Laptimer: yes
(No function recognizable in the head-up display)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 30
2 Retrofits
2.1 RDKS [SFD: yes]
Complete instructions: https://drive.google.com/file/d/1DpJ_xrEczTPKrVsqrkWgNaY7Tsk2JYeo/view

Coding:
Control unit 19 (Gateway) [SFD: yes] [Tested SW: 7083-7084]
Adjust installation list and add control unit with number 65 (tire pressure monitoring system)

Control unit 03 (ABS) [SFD: yes] [Tested SW: 0131-0134]

Coding:
Byte 25 Bit 2, 3, 4 deactivate
Byte 27 Bit 4 deactivate

Control unit 17 (Speedometer) [SFD: yes] [Tested SW: 3460-3470]

Coding:
Byte 3 Bit 7 activate (Tyre pressure monitoring)
Byte 4 Bit 0 deactivate (Tyre monitor display)
Byte 11 Bit 2 activate (BAP Strecke, Tyre pressure monitoring BAP)

Control unit 5F (Infotainment) [SFD: Ja] [Tested SW: 1803-1941]

Adjustments:
Fahrzeug Funktionsliste BAP (Car function list BAP):
tire pressure system 0x07 msg bus: CAN_Infotainment
tire_pressure_system_0x07: activated

Car_Function_Adaptations:
menu_display_rdk_over_threshold_high: activated
menu_display_rdk: activated

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 31
2.2 45-watt USB module [SFD: no]
Parts list:
Front USB module: 5NA035700
Connector for front: 8K0973754C (Coupling for old connector 8K0972994B)
Pins: N 907647.01 (For coupling N 907648.01) MQS contacts
Rear USB module: 2G6035718

The connector for the front USB module must be replaced, and the wiring must be changed as follows:
Old: New:
Pin 1 KL30a red Fuse S20 Pin 1 KL30a red Fuse S20

Pin 2 GND brown Ground Pin 2 VS5V green Pin 4 MIB3

Pin 3 KL58d grey Signal lighting Pin 3 KL58d grey Signal lighting

Pin 4 VS5V grey Pin 4 MIB3 Pin 4 GND brown Ground

At the rear, the USB module can be replaced 1:1.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 32
2.3 Golf 8 R mode button on the steering wheel [SFD: yes]
Required items:
- Buttons from Golf 8 R 1EA959442C or 1EA959442F
(successor)
- Original dataset from the vehicle for gateway 0019
- Text editor, for example, Notepad++
- Dongle + software for flashing and unlocking the dataset
with SFD

Installation:
1. Disconnect the battery
2. Remove the airbag from the steering wheel
3. Take ouput the steering wheel trim
4. Remove the button on the left side of the steering wheel
5. Install the new button and reassemble in reverse order
Note: Replace both control buttons. The left one (with the logo) and the right control panel!
6. Take a short drive after reconnecting the battery, then cycle the ignition to clear error messages.

Open the following dataset in a text editor:

„DA_0019_7208_5H0_XXXX_010FPA000003_MQB37XXXXXNBR.xml“

Variables in the filename:

XXXX  Dataset version
XXX  Vehicle type (for example, GTI or R)
5H0  Body variant
NBR  ???

The following code block needs to be modified:

After 3.962 characters, starting from the beginning of the code, the data block (184 characters long) begins
with „FA“.

FA -> Start of the code block

XX -> Depending on the vehicle’s configuration
XX -> Modify

The last 8 characters form the checksum of the entire data block. It must be recalculated when making
changes (see point 4)

FA XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX

The following needs to be changed:

01: XX  FD 02: XX  01 03: XX  01
04: XX  03 05: XX  00
06: XX  08 (Only in Nürburgring mode)
07: XX  07 (Only in Nürburgring mode)
08: XX  FA 09: XX  70

One must pay attention to the order of driving modes, as otherwise, when switching between driving modes,
the sequence may not be correct.

Then upload the modified dataset. The gateway must be unlocked for the upload by using SFD.

The memory address is: 7208 and the login code is: 20103

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 33
 Alternatively:
- Engrave the cover with the respective logo. The cover works with every revision and doesn't need to
come specifically from the Golf R
- On the circuit board of the Golf 8 R's keypad, replace the following components:

- 1x SMD 0603 resistor 220 ohms

The size of the resistor depends
on the chosen LED.
- 1x SMD 3430 LED red
For GTI, for example:
LED + Resistor
Brighter: LED + Resistor

Alternatively, use your own circuit board and solder

the following components:
- 1x SMD 3430 LED red
- 1x SMD resistor 70 ohms
- 1x Transistor BC817

But without flashing the corresponding

firmware, it won't work.

The following coding should also be compared before and after the modification:
Control unit 19
Adjustments:
Multi_function_steering_wheel_control_module Coding Value:
Schalter für Tiptronic im Lenkrad installed
Temperatursensor installed
Variante ACC-High
Klemmenstatus active with clamp 58
Taster für Lenkradheizung not_active
Distanzregelung Funktionsanfrage (FoD) activated
Travel Assist Funktionsanfrage (FoD) activated
Signalhorn, Weckfähigkeit not_active
Geschwindigkeitsbegrenzer not_active
Kombi_02_gueltig invalid
zweistufig active
Plattform MQB2020
(Depending on the vehicle configuration)
Do not spend money on the China versions.
There, the logo was engraved, and the 3 components were soldered. But it doesn't always work.

Datensatzkonfigurator: https://drive.google.com/file/d/1TO-m19At11qjMEcr_ZXCuP6IWgQew0UI/view

Video: https://youtu.be/ieC6ddiOeJg

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 34
2.4 Frameless interior mirror

Parts list: 3G0 857 511 AC

Additional changes required: None, the mirror fits electrically1:1

3G0 857 511 AM

(Original, may
vary.)

3G0 857 511 AC

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 35
2.5 Active lane change assistant [SFD: yes]

Requirements: Lane-keeping assistant

Travel assistant
Lane change assistant
ACC
Park steering assistant

Control unit A5 (Front camera) with at least software version 3400, part number 5WA980653D
Control unit 76 with part number 5WD919298, 5WA919298, or 5R3919298 (12 sensors)

The system is activated above 90km/h and on highways.

The coding shown here only works for European vehicles.

Coding:

Control unit A5 [Tested SW: 3403-3406]

Coding:
Hc_variante: Variante_5

Control unit 09 [Tested SW: 0159-0183]

Adjustments:
Turn signal functions:
Travel Assist: Active

Note: After the coding, an error can occur in control unit 09: “TA_01”. This happens only
if the BCM has a dataset with version “0001” or “E001” in memory address “7235”.
Can be fixed by uploading a dataset with version “E002” or higher.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 36
2.6 Retrofitting the facelift entry lights (puddle lights)
What is needed:
- Tools:
o Plastic wedge (for removing the mirror glass)
o Screwdriver
o Torx 10
- Entry light:
o VW:
Driver's side Left-hand drive: 5H1945301C Right-hand drive: 5H2945301C
Beifahrerseite Left-hand drive: 5H1945302C Right-hand drive: 5H2945302C
o GTI:
Driver's side Left-hand drive: 5H1945301D Right-hand drive: 5H2945301D
Beifahrerseite Left-hand drive: 5H1945302D Right-hand drive: 5H2945302D

1. Press the mirror glass inward on the outside to create a gap between the mirror glass and the housing on the
vehicle's outside. This allows the mirror glass to be carefully pried out with the plastic wedge. Don’t forget to
disconnect the two cables for the mirror heating.
2. Press down the exposed clips of the mirror cap and pull the cap backward. If present, disconnect the LED
connector on the mirror cap.
3. After removing the mirror cap, loosen the two screws of the front frame and remove the frame. The frame is
additionally clipped in at the top.
4. Optionally, remove the turn signal light to create more space. Simply loosen the two screws, disconnect the
connector, and remove the turn signal light.
5. Then, loosen the lower frame to which the entry light is attached and rotate it backward. It is secured with
three retaining clips.
6. Disconnect the connector from the entry light. Then, loosen the two screws of the old entry lights and
remove the lights.
7. Install in reverse order.
1: 2/3:

3/4: 5/6:

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 37
2.7 Unverified retrofits, coding’s for some retrofits
2.7.1 Retrofitting light strip [SFD: yes]
Parts list (may be incomplete):
Left light strip: 5H0 941 653 C
Left connector: 4F0 973 702 A (Connectors, pins and seals are available as a complete set on eBay)
Right light strip: 5H0 941 654 G
Right connector: 4F0 973 702 F (Connectors, pins and seals are available as a complete set on eBay)

Wires: 0,35mm² brown (approx. 10m), 0,35mm² yellow/black (approx 5m), 0,35mm² yellow/white (approx 5m)
Textile adhesive tape for the wiring harnes
Connector for the right strip:
Pin 1 brown Ground  Interior ground point
Until MY CW48 2020: Pin 2 yellow/white Signal  BCM T46b (B) Pin 20
From MY CW48 2020: Pin 2 yellow/white Signal  BCM T73b (C) Pin 35

Connector for the left strip:

Pin 1 brown Ground  Interior ground point
Until MY CW48 2020: Pin 2 yellow/black Signal  BCM T46b (B) Pin 32
From MY CW48 2020: Pin 2 yellow/black Signal  BCM T73b (C) Pin 61

The dataset for BCM (ECU 09), address 7203, needs to be updated!
Coding:
Control unit 09 [SFD: yes] [Tested SW: 0159-0161]
Adjustments:
Until MY CW48 2020:
Leuchte 2 SL VL B20:
Lasttyp 2: LED_Kleinleistung_ohne_Open_Load_Diagnose
Lampendefektbitposition 2: 35
Fehlerort mittleres Byte DTC-DFCC 2: 26
Lichtfunktion A 2: Standlicht
Dimmwert ABC 2: 100
Lichtansteuerung HD ABC 2: always
Lichtfunktion D 2: Ambiente Exterior 4
Dimmwert DEF 2: 100

Leuchte 3 SL VR B32:
Lasttyp 3: LED_Kleinleistung_ohne_Open_Load_Diagnose
Lampendefektbitposition 3: 3F
Fehlerort mittleres Byte DTC-DFCC 3: 27
Lichtfunktion A 3: Standlicht
Dimmwert ABC 3: 100
Lichtansteuerung HD ABC 3: always
Lichtfunktion D 3: Ambiente Exterior 4
Dimmwert DEF 3: 100

From MY CW48 2020:

Leuchte 31 AMBL 1 C61:
Lasttyp 31: allgemeine_LED_bis_6W
Lampendefektbitposition 31: 35
Fehlerort mittleres Byte DTC-DFCC 31: 26
Lichtfunktion A 31: Standlicht
Dimmwert ABC 31: 100
Lichtansteuerung HD ABC 31: always
Lichtfunktion D 31: Ambiente Exterior 4
Dimmwert DEF 31: 100

Leuchte 32 AMBL 2 C35:

Lasttyp 32: allgemeine_LED_bis_6W
Lampendefektbitposition 32: 3F
Fehlerort mittleres Byte DTC-DFCC 32: 27
Lichtfunktion A 32: Standlicht
Dimmwert ABC 32: 100
Lichtansteuerung HD ABC 32: always
Lichtfunktion D 32: Ambiente Exterior 4
Dimmwert DEF 32: 100

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 38
2.7.2 Rear view camera [SFD: yes]
Parts list:

1x Retrofit kit from VW: 5H9 054 634

Correct dataset! Otherwise, it may happen that the image is not displayed correctly.

Coding:
Control unit 19 (Gateway) [SFD: yes]
Coding:
PaCo_Video_Parksystem: RVC_compact_smart

Control unit 5F (Infotainment) [SFD: yes]

Adjustments
function_configuration_unit:
RVC_video_input: ethernet

Car_Function_List_BAP:
VPS_0x0B_msg_bus: can_fas
VPS_0x0B: activated

parkingsystem_video_input:
carrier_resolution: 1392x656

function_configuration_rvc:
rvc_low_black_screen_trunk_open: not_active
rvc_low_failsafe: not_active
rvc_low_black_screen_velocity_threshold: not_active
rear_view_low_rvc: not_active
rvc_low_lid_close_delay_time: 0 [UN]_s
rvc_low_videofailure_detection_time: 0

2.7.3 Connect/Code the valve exhaust system to the engine control unit [SFD: ???]
Coding:
Control unit 01
Coding:
Byte 09 Bit 2 activate

2.7.4 Electric exterior mirrors [SFD: yes]

Parts list:

Coding:
Control unit 09
Adjustments:
Spiegelverstellung:
Spiegelanklappen_bei_Verriegelung: active
Spiegelabsenkung_bei_Rueckwaertsfahrt: active
Menuesteuerung_Spiegelabsenkung: active
Spiegelverstellung_Synchron: active
Menuesteuerung_synchrone_Spiegelverstellung: active
Menuesteuerung_Funk_Spiegel_anklappen: active

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 39
2.7.5 Trailer hitch [SFD: yes]

Coding:
Control unit 19 (Gateway) [SFD: yes]
Adjust installation list and add control unit with the number 69 (trailer).
(Codierung -> Trailer_hitch: Trailer hitch (manually removable)
(Codierung -> Rear_view_mode_trailer_hitch: installed)

Control unit 01
Coding:
Byte 5 Bit 4 activate

Control unit 03
Adjustments:
Gespannstabilisierung: activate

Control unit 09
Adjustments:
Vernetzung:
Anhaengeranschlussgeraet: installed

Control unit 13
Coding:
Control_module_for_towing_sensor: installed (Byte 1 Bit 7)

Control unit 3C
Coding:
ECU for draw bar: with_ECU_draw_bar (Byte 00 Bit 5)

Control unit 6C
Coding:
equipment_ahk: installed (Byte 02 Bit 0)

Control unit A5
Coding:
AAG: coded (Byte 5 Bit 4)

Depending on what is stated in the manual.

Control unit 69
Coding:
Byte 1 Bit 0-7
01 -Trailer Connector Diagnostigs active
and/or
Byte 3 Bit 0-7
01 -Trailer Connector Diagnostigs active

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 40
2.7.6 Retrofit Travel assist [SFD: yes]

Requirements: ACC

What is needed:
- Steering wheel with the button on the steering wheel to activate the travel assistant
- Tools for changing the steering wheel
o Multi-tooth socket
o Large slotted screwdriver
- Dongle + software for coding and unlocking with SFD

Coding:

Control unit 13
Coding:
Capacitive_Steering_wheel: installed
Travel_Assist: activated

Control unit A5
Coding:
Klr: Coded
Emergency_Assist: EA_Variant_4
Hc_variante: Variante_2

Control unit 09
Adjustments:
Fahrerassistenz-Blinkfunktionen:
Fahrerassistenz_Blinkenfunktionen: Wechselblinken_Warnblinken_Bremsblinken
Warnblinken_durch_Fahrerassistenz: active
Hupen_durch_Fahrerassistenz: active

2.7.7 Wireless CarPlay / Android Auto [SFD: yes]

Only if CarPlay or Full Link works with a cable
Control unit 09 (From SW 1803)
Adjustments:
function_configuration_connectivity:
app_connect_over_wifi: yes
wifi_client_mode_5GHz: on
wifi_client_mode_2_GHz: on
WIFI_Hotspot_5GHz: on
WIFI_Hotspot_2_4GHz: on
apple_car_play: on
google_android_auto: on
wlan_module: active (optional)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 41
2.7.8 Blindspot [SFD: yes]
Control unit 03
Adjustments:
Delay management:
Rear cross traffic assistant: activated

Control unit 17
Coding:
Lane change assistance: yes
Lane change assistant, BAP distance: yes

Control unit 19
Control unit 3C eintragen

Coding:
PaCo_Rear_Cross_Traffic_Alert: installed

Control unit 5F
Adjustments:
Car_Function_Adaptations:
menu_display_lane_assistant_over_threshold_high: activated
display_lane_assistant: activated

Car_Function_List_BAP:
SWA_0x1A: activated

Control unit 76
Coding:
Rear Cross Traffic Alert: installed

Control unit 3C
Flash the corresponding dataset and code according to the vehicle equipment.

2.7.9 Rain sensor [SFD: yes]

Control unit 09
Adjustments:
Regensensorik_Verbauund_ABT_Steuerung:
Regensensor LIN_Regen_Licht_Sensor
Lichtsensor LIN_Regen_Licht_Sensor
HMI_Wiper_Comfort_Rain_Sensor_OFF active

Lighting_Assist_Adaptation:
Assistenzfahrlicht bei Regen active
Maskierung_Regenlichtmenü not_active
Assistenzfahrlicht, Empfindlichkeit per BAP einstellbar detected

Control unit A5
Coding:
Rain_light_sensor: Coded

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 42
2.7.10 Rear door handles for Kessy [SFD: yes]

Front door handles also fit the rear.

Wiring must be routed and connected in the same way as for the front door handles.

Control unit 09
Adjustments:
Passive_EntryExit_Toggle:
Passiv Entry Türgriff hinten links activated
Passiv Entry Türgriff hinten rechts activated
Passiv Exit Türgriff hinten links activated
Passiv Exit Türgriff hinten rechts activated

Control unit B7 [Login code: 10587]

Adjustments:
Par_Bedienstellen:
Bedienstelle Fahrerseite hinten, Verbauvariante 0
Bedienstelle Beifahrerseite hinten, Verbauvariante 0

Afterwards, the basic setting for each window must be carried out separately. This works as follows:

1. Fully lower the window by holding down the corresponding switch. Once the window is down, briefly
release the switch and then hold it in the same direction again for 3 seconds.
2. Fully raise the window by holding up the corresponding switch. Once the window is up, briefly release
the switch and then hold it in the same direction again for 3 seconds.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 43
3 Unlocking VIM (Video in Motion) [SFD: yes]
Source

You will need:

- Dataset configurator or text editor with the original dataset.
- Dongle + software to upload and unlock the dataset with SFD.

With the datataset configurator, you can also easily export a dataset without needing the original one.

The following existing dataset can be imported/edited:

„DA_005F_720D_3G0_ER11_GESCHWABSCHW_EURDWABKW2520.xml“

The following code block can be adjusted:

45523131 00 00 06 02 06 02 0000 000A 06 02 06 02 FF 00 06 02 06 02 06 02 FF 00 0007 71D6FE2D

45523131 - Dataset version 45523131 = ER11

00 - Video/Mirrorlink deactivation threshold 00 = 0 km/h Some FW max. 127 km/h
00 - Video/Mirrorlink hysteresis 00 = 0 km/h
06 - Setup-Menu (Car-Menu) deactivation threshold 06 = 6 km/h
02 - Setup-Menu (Car-Menu) hysteresis 02 = 2 km/h
06 - DAB slideshow deactivation threshold 06 = 6 km/h
02 - DAB slideshow hysteresis 02 = 2 km/h
0000 - DAB slideshow update rate 1 0000 = 0 seconds
000A - DAB slideshow update rate 2 000A = 10 seconds
06 - Manual deactivation threshold 06 = 6 km/h
02 - Manual hysteresis 02 = 2 km/h
06 - Route guidance deactivation threshold e 06 = 6km/h
02 - Route guidance hysteresis 02 = 2 km/h
FF - Broadcast-Website (Browser) deactivation threshold FF = 255 km/h
00 - Broadcast-Website hysteresis 00 = 0 km/h
06 - Destination input deactivation threshold 06 = 6 km/h
02 - Destination input hysteresis 02 = 2 km/h
06 - Bluetooth paring deactivation threshold 06 = 6 km/h Some FW max. 180 km/h
02 - Bluetooth paring hysteresis 02 = 2 km/h
06 - Message input deactivation threshold 06 = 6 km/h
02 - Message input hysteresis 02 = 2 km/h
FF - Radio text (RDS) deactivation threshold FF = 255 km/h
00 - Radio text (RDS) hysteresis 00 = 0 km/h
0007 - Radio text update rate 0007 = 7 seconds
71D6FE2D - CRC-32 checksum must be recalculated when making changes (See point 6)

In general, the following applies: FF = Always deactivated

FE = Always activated

The new dataset can be compiled as desired.

The infotainment control unit must be unlocked for upload using SFD.

The memory address is: 720D and the login code is: 20103

Link to the completed dataset for the MIB3 (Odis-E, VCTool, also Skoda, Seat, Audi)
https://drive.google.com/file/d/1ROfhplkWY6w1wTgt7WDvKsgiw-zFPNZJ/view

Link for the configurator v1.05:

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 44
 https://drive.google.com/file/d/1TO-m19At11qjMEcr_ZXCuP6IWgQew0UI/view

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 45
4 Changing comfort turn signal cycles to 2 - 5 [SFD: yes]
Cannot be coded, it is only possible through an adjustment of the dataset!
Tested:
Control unit 09 [Tested SW: 0159-0183]
Adjustments:
Light_control:
Komfortblinken Blinkzyklen: 3

You will need the following:

- Original dataset from the vehicle for the Body Control Module (BCM) 0009
- Dataset configurator or a text editor, such as Notepad++
- Dongle + software for uploading and unlocking the dataset using SFD

The following existing dataset can be imported/edited:

„A_009_7237_5H0_ZG05_202002270000_LISIRECAS.xml“

The following code block can be adjusted:

5A 47 30 35 -> Here ZG05

32 30 32 30 30 32 32 37 30 30 30 30 -> Here 202002270000
XX XX XX XX -> CRC32 checksum, must be recalculated for any changes (See point 6)

XX -> Depends on the vehicle’s configuration

XX -> Modify (07 = 2, 47 = 3, 87 = 4, C7 = 5)

5A 47 30 35 32 30 32 30 30 32 32 37 30 30 30 30 XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX

The calculated checksum will be replaced in the modified dataset with the old checksum. See point 6 for the
checksum calculation.

Before uploading the new data set, the infotainment system must be reset to factory settings.
After that, it is necessary to unlock the BCM (control unit 09) via SFD for the upload.
Then the data set can be uploaded. It must be ensured that the 'Delete/Erase' option is activated in
VCTOOL and VCP.

For software versions above 0174, it is recommended to upload all parts of the BCM data set in one go to
prevent an error from remaining in the control unit, which could indicate a manipulated data set.

If problems occur, it may also help to upload the data set a second time.

The memory address is: 7237 and the login code is: 20103

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 46
 For vehicles that are not connected to WeConnect by VW or should no longer be connected:

If the vehicle has not been connected to WeConnect by VW:

After uploading the dataset, the adaptation values in the BCM need to be reset.
STG 09 -> Basic Settings -> "Reset all adaptation values".

If the vehicle has been connected to WeConnect by VW and should no longer be connected:

After uploading the dataset, reset the infotainment to factory settings.

Setup -> Factory settings

For vehicles that should remain connected to WeConnect by VW:

1. Reset the infotainment to factory settings (Do not set up or connect yet!)
2. Remove the vehicle from your WeConnect account page (WeConnect contract will still remain, but I
cannot confirm the status of any purchases)
3. Delete the WeConnect account with VW (Go to Settings -> Account Settings -> Delete User Account)
4. Create a new WeConnect account the following day (You can use the same email address as the old
account)
5. Add the vehicle using its identification number
6. Enter your new WeConnect account details in the infotainment system (Not before)

Subsequently, the relevant data from the vehicle will be loaded into your account and profile, including the
number of turn signal cycles in this case.

Video: https://youtu.be/rGODKzj3cBU

Link for the configurator:

https://drive.google.com/file/d/1TO-m19At11qjMEcr_ZXCuP6IWgQew0UI/view

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 47
5 Start-Stop memory module
5.1 Option 1 (Memory module for the Golf 7 platform)
Possibly not possible for every BCM (Body Control Module), check pins beforehand
Use the Start-Stop memory module from Golf 7 and connect it to the BCM as follows:

To BCM Pin T73b/60 (button) and Pin T73b/51 (status LED)

Then apply the following coding:

Control unit 09 [Tested SW: 0159-0161] [SFD: yes]
Funktion Cockpittaster 1:
Function_button_1: Start_stopp

5.2 Option 2 (Memory module for the Golf 8 platform)

Module 1: Link
Manufacturer: Speed Signal
Price: 141,61€ (as of 08.07.2023)
Instructions: Installation instructions from the manufacturer
Function: Deactivates the start-stop function every time the vehicle is started. Does not respond to
changes in the start-stop function when switching driving modes.

Module 2: Link
Manufacturer: VAGMEB (China)
Price: Ca. 50€ (Varies)
Instructions: Imprint
Installation report: For a Cupra Formentor (not by me): Link
Function: Deactivates the start-stop function every time the vehicle is started. Does not
respond to changes in the start-stop function when switching driving modes.

Module 3: Link
Manufacturer: China module
Price: Ca. 20€ (Varies)
Instructions: Wire labels
Function: Deactivates the start-stop function every time the vehicle is started. Does not
respond to changes in the start-stop function when switching driving modes.

Module 4: Link
Manufacturer: MTM
Price: 249€ (as of 08.07.2023)
Instructions: -----
Function: Unknown

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 48
 Module 5: Link
Manufacturer: asr
Price: 199€ (as of 12.10.2023)
Instructions: QR code for download is included (Golf 8, Seat/Cupra Formentor Leon KL, Audi A3 8Y, S3 8Y,
RS3 8Y)
Function: Video from the manufacturer (Saves lane-keeping assist and start-stop settings, must be
adjusted via the steering wheel buttons, also works when changing driving profiles).

Bracket: Pictures of the bracket I designed

Required: 2x M4x12mm + 1x M4x6mm + 3x M4 washers
Additionally, the ground wire needs to be extended by 10cm
3D printing files can be found here: Link

5.3 Option 3 (Coding)

Solvable via coding, see here

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 49
6 Calculate CRC32 checksum
After a dataset has been modified, the last 8 characters must be replaced with a newly calculated checksum.
Otherwise, the changes will not be accepted by the control unit.

There is a calculator available for this purpose, for example, on this website:
https://www.lddgo.net/en/encrypt/crc

You need to select „HEX“ for the „Content Type“ and set „CRC-32“ for the „Algorithm“.

The data block, except for the old checksum (last 8 characters), must be entered in the „Input Content“

After clicking the „Calculate“ button, the result will be displayed below as „Check Result(HEX)“.

Alternative: You can also use https://www.crccalc.com for this purpose.

You should copy the 8 characters after „0x“ here.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 50
7 Modifications
7.1 Enhancing Harman/Kardon OEM subwoofer
By making a simple modification to the subwoofer’s enclosure, a significantly better bass can be achieved.

What is needed:
- A vibrating saw (narrow blade) or Dremel with the appropriate tool
- Trox 25 screwdriver
- Something for deburring
- Sandpaper

First, the subwoofer must be removed. It is located in the trunk under the floor in the cargo area. Then,
disconnect the connector (push both retaining tabs inwards) and loosen the large plastic nut in the center.
Now, the subwoofer can be taken out.

Next, the subwoofer must be removed from the enclosure. To do this, simply unscrew 5 screws (Torx 25).
Then lift the speaker along with the plastic part.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 51
 Only the marked area needs to be cut out:

After cutting, there must be a hole leading into the interior of the enclosure for everything to work correctly:

Deburr everything and slightly sand the cut surfaces.

Clean the enclosure, including the inside. Then, the

speaker can be reinstalled and screwed back in place.

Now the subwoofer can be placed back into the vehicle.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 52
7.2 Sunglasses compartment for the center console
Since VW did not provide a suitable space in the interior of the Golf 8 for sunglasses, I created my own
solution and 3D-printed it.

The new sunglasses compartment is placed in the center console, beneath the elbow rest.

Additionally, I incorporated a coin holder and a parking spot for the OBDeleven device.

The grey parts shown here (2 parts) will be 3D-printed with ABS, ASA, or another heat-resistant material (as
the interior can reach temperatures of around 60°C in the summer).

The parts shown in yellow will be 3D-printed with TPU to ensure there are no noise issues.

I lined the sunglasses compartment with felt.

Here is the link to the 3D-print files: https://www.thingiverse.com/thing:6011038

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 53
8 Maintenance
8.1 Releasing the rear electronic brake [SFD: yes]
1. Connect a battery charger
2. Turn on the ignition
3. Access Control unit 03 (ABS)
4. Go to „Basic Settings – 04“
5. Start the brake pad replacement mode

The brake cylinders should now open. They are fully open when there are no sounds (clear buzzing) coming
from the brake cylinders.
Once this process is complete:

Select “Stop” to the end te process

6. Now, you can turn off the ignition and begin working on the rear brakes.

Upon completion of the word:

1. Turn on the ignition

2. Access Control unit 03 (ABS)
3. Go to „Basic Settings – 04“
4. End the brake pad replacement mode

The brake cylinders should now close. They are fully closed when there are no sounds (clear buzzing) coming
from the brake cylinders.
Once this process is complete:

Select "Stop" to end the process.

8.2 New battery calibration [SFD: yes]

Control unit 19
Adjustments:
Battery_Adaption (Batterieanpassungen):
Battery_capacity: Enter the battery capacity of the new battery.
Battery_technology: Select the corresponding value of the new battery.
Battery_manufacturer: Enter the manufacturer of the new battery.
(Maximum 3 letters)
Battery_serial_number: Enter the serial number of the new battery. If the
new battery does not have a serial number, simply
increment the last digit by 1 (e.g., 1111111111 ->
1111111112))

8.3 Replace the windshield wipers

Front wipers: Bosch Aerotwin A863S 650/450mm
Rear wipers: Bosch A252H 250mm

Bring the front wipers to the service position.

Method 1: Turn on the ignition and immediately turn it off, then push the wiper lever on the steering
wheel downwards.
Method 2: Turn on the ignition, go to "Vehicle" in the HMI, then go to "Exterior" in the "Vehicle" tab,
and scroll all the way to the right until "Service position" is displayed. Press "Service position"
there.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 54
8.4 Adjusting the Front Camera After Lowering [SFD: yes]
Control Unit A5
Adjustments:
Body_height_wheelhouse_edge:
Body height wheelhouse edge front left: xxx [UN]_mm
Body height wheelhouse edge front right: xxx [UN]_mm
Body height wheelhouse edge rear left: xxx [UN]_mm
Body height wheelhouse edge rear right: xxx [UN]_mm

Here, enter the new values for "xxx" accordingly.

Measurement is taken from the ground to the upper edge of the wheelhouse while the vehicle is on a level
surface.

8.5 DCC Retraining After Lowering [SFD: no]

The DCC suspension system must be retrained after lowering.
To do this, the following conditions must be met:

- The vehicle should be driven for several kilometers before retraining, approximately a tankful.
- All four wheels must be suspended (vehicle on a lift)
- Battery charger must be connected to the car battery
- Hood open
- Connect the diagnostic dongle and proceed as follows:

Select Control Unit 14 [Login: 20103]

Basic Settings:
Retrain with the wheels in the extended position
 Press Start
 Wait
 After about 30 seconds, a message should appear indicating successful retraining
(some software versions may not display a message)
 Press “Finish” or "Stop."

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 55
8.6 Key battery replacement

What is needed:
- Pointed tool, such as a small screwdriver or similar
- CR2032 button cell

Insert a pointed tool between the chrome part and the back of the key and carefully pry it open. After that,
the cover can be lifted gently.

Insert the screwdriver between the two

retaining tabs, push the battery slightly
away from the tabs, and lever it out.

Insert the new battery and snap the cover back on.

Done.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 56
9 Hidden menu’s
9.1 Service menu instrument cluster (Reset service):
1. Turn on the ignition
2. Press the following button on the steering wheel once:

3. Navigate to the menu item „Travel time/distance“

4. Now hold down the following button for about 5 seconds and then release it.

5. Now the service menu appears on the instrument cluster.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 57
9.2 Service Menu Infotainment System (MIB3) (For Software Update):
Press and hold the menu button for about 3 seconds.

9.3 Exit Software Update Menu

Simply click here:

9.4 Restart MIB3

Method 1: Press the illuminated "Power" button for about 20 seconds until the system restarts.

Method 2: Execute the two points "Service Menu Infotainment System" and "Exit Software Update
Menu".

Method 3: Connect the diagnostic dongle and select the following:

Controller 5F -> Reset

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 58
10 MIB3-Updates
10.1 Offline Navigation Map Update (without WeConnect)

1. The installed version can be checked against the one displayed on the website. To do this, click on "Setup"
in the vehicle and select "System Information.

Note: 23.2 = February 2023

5H0035816X = Discovery pro
5H0035820X = Discovery media

2. Visit the website https://www.volkswagen.de/de/besitzer-und-nutzer/myvolkswagen/navigation-map-

update.html

3. Select the corresponding vehicle, model year, and navigation system, then click on "Download." The
currently available version will also be displayed here.

4. Extract the downloaded file onto a USB stick (at least 32GB, preferably with a Type-C connector or with an
adapter) using 7-zip. The USB stick can be formatted in exFAT or NTFS file format. Now, there should be
numerous folders visible on the USB stick:

5. Plug the USB stick into the vehicle and leave it connected.
No further action is required. The MIB3 updates the maps automatically in the background during normal
use of the vehicle.
The completion of the update can only be determined by checking the system information. The version
number should have changed.

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 59
10.2 Radio station data update (Only for European vehicles)

1. Visit the website https://www.phonostar.de/vw/de/download

2. Enter the part number of your MIB3 unit below, search, and download.

The last letter practically doesn't matter, as the search result is always the same.

3. Unpack (with 7-zip) the downloaded file on a USB stick (preferably with a Type C connector or with a
adapter). The USB stick can be formatted in, exFAT, or NTFS file format. On the USB stick, it should look
like this:

4. Plug the USB stick into the vehicle.

5. Click on "Start" and wait.

6. After the infotainment system has restarted, the following message should appear:

Done

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 60
10.3 MIB3 System updates
I will not provide links for system updates due to copyright reasons.
Please understand this.
Updates can be obtained through the dealer (in case of issues) or over the air (OTA).
OTA updates are distributed in waves by VW.

System updates via USB (19.06.2024): 3G8919360AQ 1983 (Discovery Pro/Media)

3G8919360CF 2460 (Facelift)
3G8919360L 1805 (Radio)

System updates via OTA (03.01.2024): 1941 (Discovery Pro/Media)

For the update, the procedure is usually as follows:

1. Extract the update onto a USB stick (preferably with a Type C connector or with an adapter). The USB stick
can be formatted in exFAT or NTFS file format. On the USB stick, it should look like this:

Please note the following points:

• Fully charge the vehicle battery before starting
• Charger connected to the vehicle battery and turned on
• Hazard lights turned on

2. Insert the USB stick into the vehicle.

3. Hold down the menu button for about 3 seconds.

4. Now the following needs to be clicked:

DO NOT do the following during the update:

• Start the engine • Turn the ignition on or off

• Interfere with the infotainment system • Hold down the "Power" button

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 61
 5. To execute an update, press "Update" and choose the source.

6. Once the update is complete (takes about 30 minutes), simply click "Resume".

7. Afterward, the software management error in control unit 5F should be resolved.

To do this, use a diagnostic dongle to read the code in
Discovery Pro/Media:
Control Unit 5F -> Adaptations -> Component_Update_Confirmation -> Confirmation_Key
Radio:
Control Unit 5F --> Adaptations --> Confirmation_of_installation_change --> Confirmation_Key
Enter this code into an XOR calculator. The calculated result should be entered into the same adaptation
channel and "code" should be selected.
You should see a message indicating that the new value has been successfully adopted, although the value in
the adaptation channel does not change. This is normal, and the error should now be resolved.

XOR calculator:
https://drive.google.com/file/d/1TO-m19At11qjMEcr_ZXCuP6IWgQew0UI/view

VW recommends resetting the infotainment system to factory settings after an update.

If necessary, reactivation of various functions may be required through ODIS-Service, which is only possible with
appropriate access.

Video: https://youtu.be/4AsSbGd3caU

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 62
11 Activate launch control
1. Turn off ESC or set it to "ESC-Sport."

2. Select Sport mode

or

3. Depress the brake pedal with your left foot and press the accelerator pedal with your right foot. The
engine will rev up to a maximum of 4,000 RPM, and a message will appear on the dashboard.

When you release the brake pedal, the vehicle will move accordingly.

Note:
Does not work when...
- The engine is too cold.
- The engine is too hot.
- A trailer is attached.
- The steering wheel is not straight (steering angle).
- Manual transmission is present

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 63
12 Software updates (23.08.2024)
Updates executable, conditions for each update in red
NOT SUITABLE FOR NOVICES!!!!!! ALWAYS with a full battery and a charger connected!!!!!!!!

Control unit 01 (Motor)

8Y0906259C SW 0003  0004  8Y0906259K SW 0001

Control unit 03 (ABS)

5WA614517BJ SW 0131  0132  5WA614517BL SW 0134 (New dataset, calibration data, and SFD required)  5WA614517CF SW 0136 (New dataset and SFD required)
5WA614517BE SW 0127  5WA614517BL SW 0134 (New dataset, calibration data, and SFD required)  5WA614517CF SW 0136 (New dataset and SFD required)
5WA614517BF SW 0127  5WA614517BM SW 0134 (New dataset, calibration data, and SFD required)

Control unit 08 (Clima)

5WA907007G SW 3140  5WA907007R SW 3440
5WA907007J SW 3130  5WA907007P SW 3440
5WA907007Q SW 3130  5WA907007Q SW 3440
5WA907007M SW 3050  5WA907007Q SW 3440
5WA907007S SW 3150  5WA907007R SW 3440
5WA907007T SW 3170  5WA907007R SW 3440
5WA907727S SW 0240  5WA907727AC SW 0440
5WA907727N SW 0340/0341  5WA907727AC SW 0440
5WA907727P SW 0340  0341  5WA907727AD SW 0440  5WA907727BC SW 0462  5WA907727BB SW 0531

Control unit 09 (BCM)

5WA937086Q SW 0137  5WA937086F SW 0159  0160  0161
Sub control unit 3G0980611 SW 0059  0060

Control unit 14 (DCC)

1EA907376B SW 0456  0457

Control unit 17 (AID instrument cluster)

5H0920340A SW 3460  3470
5H0920340B SW 7360  7380

Control unit 19 (Gateway)

5WA907530J SW 7083  7084

Control unit 3C (Lane-Change)

2Q0907686E SW 0276  2Q0907685K SW 0289

Control unit 42 (Driver’s side door)

5Q0959593K SW 0330  5Q0959593L SW 0350

Control unit 47 (Soundsystem)

5H0035456A SW 4315  4319

Control unit 4B (Light)

5WA907338 SW 1372  5WA907338B SW 1447 (new Dataset, coding, basic setting, SFD necessary)

Control unit 52 (Passenger side door)

5Q0959592K SW 0330  5Q0959592L 0350

Control unit 5F (Infotainment) (Update via USB + fixing SVM errors, OTA available from version 17XX)
5H0035816D 1803  5H0035816D 1890  1896  1898  5H0035816K 1899  1941 (Modification adjustments: Bluetooth_Sniff_Mode: off)  1969  1983

Control unit 6C (rear view camera)

5WA980556B SW 0193  5WA980556D SW 0344

Control unit 75 (Emergency call module)

5WA035284C SW 0135  0142 (Modification adjustments: Online_Service_Backend_Primary_Hostname:
https://mod3vkmsmbbreg-0.prd.eu.dp.vwg-connect.com/mbb/vehicles/v2/deviceRegistered
 5WA035284F SW 0144

Control unit 76 (PDC)

5WD919298 SW 0230  5WA919298B SW 0578 (new Dataset, adjustments und coding need to be reapplied)  5WA919298B SW 0582

Control unit A5 (Front camera)

5WA980653A SW 3129  5WA980653C SW 3302 (new Dataset)  3303  5WA980653D SW 3403 (new Dataset)  3405  3406 (new Dataset)

Control unit B7 (Interface for access and start system)

5WA959436C SW 0706  5WA959436J SW 0725

Control unit 8107 (Antenna)

5WA035741B SW 0081  0083

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 64
13 Changelog
10.09.2024
- Retrofit “Rear door handles for Kessy” added
- Minor adjustments

06.09.2024
- Added point “Retrofitting the facelift entry lights (puddle lights)”

23.08.2024
- Point “Software updates” updated
- Added coding “Comfort opening of windows via door handles” at “Tested”

19.08.2024
- Point “Changing comfort turn signal cycles to 2 – 5” adjusted

14.08.2024
- Coding “Activate Auto-Hold and related messages” updated
- Added a note at point “Changing comfort turn signal cycles to 2 – 5”

24.07.2024
- Retrofit “Golf 8 R mode button on the steering wheel” updated
- VideoInMotion dataset updated

I am currently looking for a scan of a Golf 8 facelift. If anyone has a scan, please contact me via Facebook.
Thank you.

14.07.2024
- Untested coding “30 ambient colors” adjusted
- Added coding “Change the ambient colour assignment for the driving profiles” at “untested”
- Minor adjustments

13.07.2024
- Moved coding “Deactivate easy entry” to “coding without function”
- Coding “Active lane change assistant” updated
- Moved coding “Maintain sunroof tilt angle while driving” to “Tested”

03.07.2024
- Added coding “Automatically close open windows when locking the vehicle” at “No function or
changes

14 General Note’s
It may happen that the adaptation channels differ in naming depending on the software used (Odis, OBD11,
VCDS, VCP, VCTool) and their label file.
Also, it can happen that some coding’s do not work with every software version. Therefore, the codings
indicate the software version with which I have tested them. But this does not mean that the respective
coding only works with that software version.
Do not code or update control unit 44 (steering), as this may cause a defect in the control unit. Thank you
for the notice!

15 Detonations
If anyone would like to make a donation, you are welcome to do so voluntarily.
I'm adding this here because I have been asked about it several times.
https://www.paypal.com/paypalme/n3okaa
https://www.buymeacoffee.com/n3oka
Thank you =)

Coding list Golf 8 by n3oka Not for commercial use 10 September 2024 65