Light Hair Conditioner
Formulation Reference: FM00118/A
A simple light hair conditioner especially suited for fine hair types, providing gentle all over
conditioning thanks to Texique CS-32. With Texiterra Marula Oil to nourish each hair fibre and
Texiterra Raspberry Seed Oil to help restore exceptional hair shine.
Phase INCI Ingredients Function % w/w Trade Name
A Aqua Solvent Up to 100% Deionised Water
Tetrasodium EDTA Chelating agent 0.05 Edeta BX Powder 1
Sodium Benzoate Preservative 0.25 Sodium Benzoate Granular 2
B Hydroxyethylcellulose Thickener 0.50 Natrosol 250 HHR 3
C Cetearyl Alcohol Wax / viscosity control 3.50 Lanette 1665 1
Glyceryl Stearate (and)
Emulsifier 3.00 Arlacel 165 4
PEG-100 Stearate
Scierocarya Birrea Emollient / softening / shine /
0.50 Texiterra Marula Oil 5
Seed Oil nourishes
Rubus Idaeus Seed Oil Emollient / softening / shine 0.50 Texiterra Raspberry Seed Oil 5
D Phenoxyethanol Preservative 0.60 Phenoxyethanol RCH 3
Camellia Sinensis
E (Green Tea) Leaf Extract Active - antioxidant 0.05 Green Tea Leaf Powder 6
Aqua Solvent 5.00 Deionised Water
Aqua (and) Starch
Hydroxypropyltrimonium
F Chloride (and) Natural based conditioner 3.00 Texique CS-32 5
Phenoxyethanol (and)
Sodium Benzoate
Parfum Fragrance QS Green Tea Original Fragrance 6
G Citric acid solution pH adjuster QS
Suppliers: 1 BASF | 2 OQEMA | 3 Ashland | 4 Croda | 5 Scott Bader | 6 The Soap Kitchen |
Scott Bader Company Limited
Wollaston, Wellingborough, Northants NN29 7RL
44 (0)1933 663738
scottbaderpersonalcare.co.uk 1
enquiries@scottbader.com
Preparation procedure
1. Weigh out Phase A and mix until completely dissolved.
2. Whilst homogenising add Phase B and homogenise until completely dispersed.
3. Heat Phase C to 75°C with mixing. At temperature add Phase D and mix until uniform.
4. Add Oil phase to Water phase whilst homogenising. Homogenise until smooth and uniform.
5. Cool to below 40°C with slow mixing.
6. Pre-mix Phase E until powder fully dissolved. Add to main batch and mix until uniform.
7. Add Phase F individually and mix until uniform.
8. Adjust pH to 4.00 – 5.00 with Phase E.
The information in this publication is based on laboratory testing and is believed to be accurate and is given in good faith, but no representation or warranty as to
its completeness or accuracy is made. Suggestions for uses or applications are only opinions and are not intended for design purposes. Users are responsible for
determining the suitability of these products for their own particular purpose and assume all risk and liability whether used singly or in combination with other
materials. No representation or warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties of
merchantability, fitness for a particular purpose, non-infringement of any third party patent or other intellectual property rights.
Scott Bader Company Limited
Wollaston, Wellingborough, Northants NN29 7RL
44 (0)1933 663738 scottbaderpersonalcare.co.uk 2
enquiries@scottbader.com
