STVP-STM8

ST Visual Programmer for STM8 MCUs

Data brief

Features Description
 Free software ST Visual Programmer (STVP-STM8) is a full-
 Supports Motorola® S19 and Intel HEX formats featured software interface for programming ST
Flash microcontrollers. It provides an easy-to-use
 Load, edit and save executable and/or data and efficient environment for reading, writing and
files generated by the Assembler/Linker or C verifying device memories and option bytes.
compilers STVP is delivered as part of the free ST MCU
 Erase, program, view and verify device Flash toolset, which includes the ST Visual Develop
memory contents (STVD) integrated development environment and
 Project mode to automate all configuration and the ST Assembler Linker.
programming tasks In addition, developers can take advantage of the
 Programming toolkit with C/C++ source files for Free Programming Toolkit with C/C++ sources for
creating a programming application based on all the functions needed, to develop a customized
ST Visual Programmer (STVP) programming interface based on STVP-STM8 for
any supported ST programming hardware. It
 STVP supports microcontroller programming
contains source code for all the functions that
via a complete range of hardware development
allow a programming application to access the
tools and dedicated programmers, including:
STVP-STM8 low-level DLLs and program
– ST-LINK in-circuit debugger/programmer microcontrollers using any of the supported
for STM8 and STM32 programming hardware and programming method
– RLink in-circuit debugger/programmer for (socket, in-circuit programming or in situ
STM8 and ST7 programming).
– STice advanced emulators for STM8
– ST7 Flash STICK in-circuit programmer
– ST7-EPB programming board
– ST7-DVP3 and DVP2 series emulators
– ST7-EMU3 series emulators

February 2016 DocID028970 Rev 1 1/3

Revision history

Table 1. Document revision history

25-Feb-2016 1 Initial release.

2/3 DocID028970 Rev 1

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

© 2016 STMicroelectronics – All rights reserved

DocID028970 Rev 1 3/3