WAX Date: 23/02/2023
SAFETY DATA SHEET Rev: 00
1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY 2.3 Other Hazards:
UNDERTAKING Physical/ Chemical hazards:
Contact with hot material can cause thermal burns which may result in permanent dam-
1.1 Product Identifier age. Material can accumulate static charges which may cause an ignition. Spilled
pellets present a slipping hazard on hard surfaces.
Product Name: Wax
Health Hazards:
REACH Registration No: n/a
If dust is generated, it could scratch the eyes and cause minor irritation to the respiratory
Synonyms: n/a
tract. No adverse effects due to inhalation are expected. When heated, the vapour/
Trade Names: KTC, IR53, IR52, IR49, IR39
fumes given off may cause respiratory tract irritation.
Environmental Hazards:
This SDS covers the above trade names in the below colors:
No significant hazards. Material does not meet the criteria for PBT or vPvB in accordance
with REACH annex XIII.
Aqua, Burgundy, Pale pink (UK), Pink, Green, Blue, Magenta , Red
1.2 Relevant identified uses of the substance or mixture and uses advised 3. COMPOSITION / INFORMATION ON INGREDIENTS
against:
Main Applications (non exhaustive list): Used in the lost wax casting industry. 3.2 Mixture
Contains a propriety blend of:
1.3 Details of the supplier of the Safety Data Sheet
CAS # %
Company Name: Goodwin Refractory Services India Private Limited Paraffin Wax 8002-74-2 <70
Address: 39/5, Old Mahabalipuram Road, Kalavakkam Village, Resins n/a <20
Thiruporur– 603110, Tamilnadu, India Polymers n/a <30
Phone No. +91 44 47439950
Fax No. +91 44 47439990
Email address: info@grs-india.com 4. FIRST AID MEASURES
1.4 Emergency telephone number:
4.1 Description of first aid measures:
Emergency Telephone No. +91 44 4743 9950
Available outside office hours? No Eye Contact: Flush thoroughly with water for at least 15 minutes. Get medical
assistance.
Inhalation: At ambient/ normal handling temperatures, no adverse effects due
to inhalation of dust are expected. In the case of adverse expo-
2. HAZARDS IDENTIFICATION sure to vapours and/ or aerosols formed at elevated temperatures,
immediately remove the affected victim from exposure/ Administer
2.1 Classification of the substance or mixture: artificial respiration if breathing is stopped. Keep at rest.
This product does not contain any components which are hazardous according to Ingestion: No adverse effects due to ingestion are expected.
CLP Regulation 1272/2008 EC. Skin Contact: Wash contact areas with soap and water. For hot product: Immedi-
2.2 Label elements: ately immerse in or flush affected area with large amounts of cold
This product does not require a hazard warning label in accordance with water to dissipate heat. Cover with clean cotton sheeting or gauze
CLP Regulation 1272/2008 EC. and get prompt medical attention.
Hazard Pictogram: None
Signal Word (s): None
Hazard Statements: None
Precautionary Statements: None
Page 1 of 4
WAX Date: 23/02/2023
SAFETY DATA SHEET Rev: 00
4.2 Most important symptoms and effects both acute and delayed 7. HANDLING AND STORAGE
No important symptoms or effects.
7.1 Precautions for safe handling:
4.3 Indication of any immediate medical attention and special treatment Minimise dust generation and accumulation. Routine housekeeping should be insti-
needed: tuted to ensure that dusts do not accumulate on surfaces.
7.2 Conditions for safe storage, including any incompatibilities:
The need to have special means for providing specific and immediate medical Store in a cool dry place and keep packaging sealed when not in use.
treatment available in the workplace is not expected.
7.3 Specific end use (s):
Section 1 informs about identified intended uses.
5. FIRE FIGHTING MEASURES
5.1 Extinguishing media: 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
DO NOT use straight streams of water. 8.1 Control parameters:
Follow workplace regulatory exposure limits for all types of airborne dust (e.g. total
dust and respirable dust).
5.2 Special hazards arising from the substance or mixture: -3
Flammable hydrocarbons, incomplete combustion products, oxides of carbon, In the UK the WEL (Workplace Exposure Limit) for Paraffin Wax is 2 mg/m
smoke, fume. measured as an 8 hour TWA (Time Weighted Average). However in all circum-
stances exposure should be kept as low as reasonably possible by suitable and
sufficient ventilation and safe working practices. For the equivalent limits in other
5.3 Advice for firefighters: countries consult your local regulatory authority.
Fire fighting instructions: Assure an extended cooling down period to prevent re-
ignition. Evacuate area. Prevent run-off from fire control or dilution from entering 8.2 Exposure controls:
streams, sewers or drinking water supply. Fire– fighters should use standard pro- 8.2.1 Appropriate engineering controls:
tective equipment and in enclosed spaces, self-contained breathing apparatus. The level of protection and types of controls necessary will vary depending upon
Use water spray to cool fire exposed surfaces and to protect personnel. potential exposure conditions. Control measures to consider:
Adequate ventilation should be provided so that exposure limits are not exceeded.
Unusual fire hazards: Explosion: Avoid generating dust; fine dust dispersed in air Should significant vapours/ fumes be generated during thermal processing of this
n sufficient concentration and in the presence of an ignition source is a potential product, it is recommended that work stations be monitored for the presence of
dust explosion hazard. thermal degradation by products which may evolve at elevated temperature (for
example, oxygenated components).
6. ACCIDENTAL RELEASE MEASURES
8.2.2 Personal protective equipment:
6.1 Personal precautions, protective and emergency procedures: Personal protective equipment selections vary based on potential exposure conditions
In the event of a spill or accidental release, notify relevant authorities in accord- such as applications, handling practices, concentration and
ance with all applicable regulations. ventilation. Information on the selection of protective equipment
for use with this material, as provided below, is based upon
6.2 Environmental precautions: intended, normal use.
Prevent entry into waterways, sewers, basements or confined spaces. Respiratory protection: If engineering controls do not maintain airborne containment con-
6.3 Methods and material for containment and cleaning up: centrations at a level which is adequate to protect worker
Land spill: Spilled pellets present a slipping hazard on hard surfaces. Small, dry health, an approved respirator may be appropriate.
spills: With a clean shove, place material into clean, dry container and cover Hand protection: The types of gloves to be considered for this material include: If product
loosely, move containers from spill area. is hot– thermally protective, chemical resistant gloves are rec-
ommended.
Water spill: Stop leak if you can do so without risk. Confine the spill immediately Eye protection: If contact is likely, safety glasses with side shields are recommended.
with booms. Skim from surface.
Page 2 of 4
WAX Date: 23/02/2023
SAFETY DATA SHEET Rev: 00
Skin and body protection: The types of clothing to be considered for this material 11. TOXICOLOGY INFORMATION
include: If product is hot– thermally protective, chemi-
cal resistant apron and long sleeves recommended. 11.1 Information on toxicology effects:
a) Acute toxicity:
Non toxic, relatively harmless and nor irritating under normal usages.
b) Skin corrosion/irritation:
Unlikely to cause skin irritation.
c) Serious eye damage/irritation:
Unlikely to cause eye irritation..
8.2.3 Environmental exposure controls:
Comply with applicable environmental regulations limiting discharge to air, water d) Respiratory or skin sensation:
and soil. Protect the environment by applying appro- It is not likely to be an inhalation hazard at normal ambient temperatures. If over-
priate control measures to prevent or limit emissions. heated, fumes and vapours are irritating to the breathing passage and lungs.
e) Germ cell mutagenicity:
9. PHYISCAL AND CHEMICAL PROPERTIES Based on available data, the classification is not met.
f) Carcinogenicity:
9.1 Information on basic physical and chemical properties: Based on available data, the classification is not met.
Appearance: Coloured flakes/pellets/beads g) Reproductive toxicity:
Odour: Faint paraffin odour Based on available data, the classification is not met.
pH: Neutral
Melting point: 70°C h) STOT-single exposure:
Boiling point: 230°C Based on available data, the classification is not met.
Flash point: No data available. i) STOT-repeated exposure:
Relative density: No data available. Based on available data, the classification is not met.
Water solubility: Non soluble
9.2 Other information: 12. ECOLOGICAL INFORMATION
No other information.
10. STABILITY AND REACTIVITY 12.1 Toxicity: No known significant effects.
12.2 Persistence and degradability: No data available.
10.1 Reactivity: Not reactive under normal storage & 12.3 Bioaccumulative potential: No data available.
handling conditions. See Section 7 12.4 Mobility in soil: No data available.
10.2 Chemical Stability: Stable under normal storage & 12.5 Results of PBT and vPvB assessment: Does not fulfill the criteria for being
handling conditions. classed as a PBT or vPvB substance.
10.3 Possibility of hazardous reactions: No specific hazardous reactions are 12.6 Other adverse effects: No specific adverse effects known
expected to occur.
10.4 Conditions to avoid: Prolonged exposure to heat and open
flames.
10.5 Incompatible materials: May react with strong oxidants.
10.6 Hazardous decomposition products: Thermal decomposition or incomplete
combustion may produce Carbon
monoxide, nitrous gasses and irritating
fumes.
Page 3 of 4
WAX Date: 23/02/2023
SAFETY DATA SHEET Rev: 00
13. DISPOSAL CONSIDERATIONS 16. OTHER INFORMATION
13.1 Waste treatment methods: Training:
Employees must be trained in the proper use and handling of this product as required
Disposal recommendations bases on material as supplied. Disposal must be in under applicable regulations.
accordance with current applicable laws and regulations, and material character-
istics at the time of disposal.
Suitable routes of disposal are supervised incineration, preferentially with energy Guidance Books:
recovery, or appropriate recycling methods in accordance with applicable regula- EH40/2005 - Workplace Exposure Information
tions and material characteristics at the time of disposal. EH44/1997 - Dust: General Principles of Protection
HSG37 - An Introduction to Local Exhaust Ventilation
14. TRANSPORT INFORMATION
Liability:
14.1 UN Number: No data available. Such information given on this safety data sheet is to the best of the company’s
14.2 UN proper shipping name: No data available. knowledge and belief, accurate and reliable as of the date indicated. However, no
14.3 Transport hazard class(es): representation, warranty or guarantee is made as its accuracy, reliability or completeness.
ADR: Not dangerous goods. It is the users responsibility to satisfy itself as to the suitability and completeness of such
IMDG: Not dangerous goods. information for their own particular use.
ICAO/IATA: Not dangerous goods.
RID: Not dangerous goods. Indication of the changes made to the previous revision of the SDS:
14.4 Packing group: No data available. Rev 1 - First Issue.
14.5 Environmental hazards: No data available. 10/10/2022 Rev 2– Update to address and products.
14.6 Special precautions for user: No data available. 23/02/2023– Rev 3– Update to change to GRS India
14.7 Transport in bulk according to Annex II
of MARPOL73/78 and the IBC Code: No data available.
15. REGULATORY INFORMATION
15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture:
International legislation/requirements:
Regulation 1272/2008:
This product is not classified as dangerous.
European Community Labeling:
This product is not classified as dangerous.
15.2 Chemical safety assessment:
Chemical safety assessments for mixture were not carried out.
Page 4 of 4
