CD263J
RCCB 2P 63A 30mA A Class
Technical properties
Architecture
Neutral position right
Number of poles 2P
CD263J Configuration
Number of modules 2
Main electrical features
Rated operational voltage Ue 230 V
Frequency 50 Hz
Voltage
Rated insulation voltage 500 V
Rated impulse withstand voltage 4000 V
Electric current
Rated residual operating current 30 mA
Rated current 63 A
Withstand not tripping on 8-20 μs wave 0.25 kA
Breaking and opening capacity 1.5 kA
Rated conditional short-circuit current Inc
according to EN 61008-1 6 kA
Electric current / temperature
Rating current -25°C 63 A
Rating current -20°C 63 A
Rating current -15°C 63 A
Rating current -10°C 63 A
Rating current -5°C 63 A
Rating current 0°C 63 A
Rating current 5°C 63 A
Rating current 10°C 63 A
Rating current 15°C 63 A
Rating current 20°C 63 A
Rating current 25°C 63 A
Rating current 30°C 63 A
Rating current 35°C 63 A
Rating current 40°C 63 A
Rating current 45°C 63 A
Rating current 50°C 63 A
Subject to technical modifications
Rating current 55°C 63 A
Rating current 60°C 56 A
Rating current 65°C 49 A
Rating current 70°C 40 A
Dimensions
Depth of installed product 70 mm
Height of installed product 83 mm
Width of installed product 35 mm
Construction size (DIN 43880) 1
Frequency
Frequency 50 Hz
Power
Total power loss under IN 8.1 W
Power loss per pole at In 4.1 W
Tripping
Protected against nuisance tripping No
Short-time delayed tripping No
Endurance
Electric endurance in number of cycles 2000
Number of mechanical operations 4000
Installation, mounting
Type of top connection for modular devices with screw
Tightening torque 2,8Nm
Type of top rail clip for modular devices NA
Type of bottom rail clip for modular devices metallic
Type of Bottom Connection for modular
devices BIconnect
Top removability for modular devices No
Bottom removability for modular devices No
Connection
Connection cross-section at output with
screw, for massive conductor 1 / 25 mm²
Connection cross-sect. flexible conductor 16mm²
Connection cross-sect. rigid cable 25mm²
Connection cross-section for rigid
conductor, upstream terminals with screws 1 / 25 mm²
Connection cross-section of the access with
screws, with flexible conductor 1 / 16 mm²
Connection cross section of access and exit
with screws, for flexible conductor 1 / 16 mm²
Type of connection with screw
Standards
Standard text IEC 61008-1 ; EN 61008-1
Subject to technical modifications
Safety
Residual current type A
REACH conform No
RoHS conform Yes
Halogen free No
Use conditions
Operating temperature -25…40 °C
Degree of pollution according to IEC 60664 /
IEC 60947-2 2
Altitude 2000 m
Storage/transport temperature -55…70 °C
Subject to technical modifications
