NCR Selfserv 84 Atm (6684) Parts Identification Manual: NCR - Confidential and Proprietary
NCR Selfserv 84 Atm (6684) Parts Identification Manual: NCR - Confidential and Proprietary
B006-7643-C000
v1
NCR - CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
COPYRIGHT AND TRADEMARKS
Information to User
The product described in this book is a licensed product of NCR
This equipment must be installed and used in strict accordance Corporation.
with the manufacturer’s instructions. However, there is no
guarantee that interference to radio communications will not The software products described in this document are
occur in a particular commercial installation. If this equipment copyrighted works of NCR Corporation.
does cause interference, which can be determined by turning the
NCR, Cx, Kalpana, Authentic, and APTRA are trademarks of
equipment off and on, the user is encouraged to consult an NCR
NCR Corporation.
service representative immediately.
CAUTION Windows is a trademark of Microsoft Corporation, registered in
the United States and/or other countries.
NCR Corporation is not responsible for any radio or
television interference caused by unauthorized Android and Chrome are trademarks of Google Inc.
modifications of this equipment or the substitution or
attachment of connecting cables and equipment iPhone is a trademark of Apple Inc., registered in the United
other than those specified by NCR. Such States and/or other countries.
unauthorized modifications, substitutions, or IOS is a trademark of Cisco, registered in the United States
attachments may void the user’s authority to and/or other countries and is used under license.
operate the equipment. The correction of
interference caused by such unauthorized All other trademarks are the property of their respective owners.
modifications, substitutions, or attachments will be
the responsibility of the user. Disclaimer:
© 2018
By NCR Corporation, Duluth, Georgia, USA.
www.ncr.com
All Rights Reserved
CONTENTS
C o n te n ts
INTRODUCTION
Manual Organization 1
Headers and Footers 1
Revision Record 1
Assemblies 1
Identification of Assemblies 1
Sub-assemblies with no Parts Breakdown 1
Multiple Views 1
Parts Lists 1
Columns in Parts Lists 1
Indented Parts Lists 2
References to Contents 2
Reference Letter Beginning with “Z” 2
Recommended Spare Parts 3
Components Identified by Schematic Symbol 3
Features 3
Updates 3
ALARMS
Standard Alarm System 4
High Security Alarm System 5
Printed Circuit Boards 6
Basic Alarm with Status Assembly 6
Alarms Basic and Enhanced with Status Assembly 6
Harnesses 7
Basic Alarms Harness 7
Enhanced Alarms Harness 7
Mas Hamilton Harness 7
Door Switch Harness (RAL) 8
Bank of America Alarms Harness 8
Alarms Harness 8
UX Alarm Door Switch Harness 9
Athena Alarms Harness 9
CABINETRY
Fascia Assembly - Walk Up, 15 Inch 10
Fascia Assembly - Walk Up, 19 Inch 12
Fascia Assembly - Drive Up, 15 Inch 14
Fascia Assembly - Drive Up, 19 Inch 16
Fascia Assembly View 1 18
Fascia Assembly View 2 20
Fascia Moulding Assemblies 22
Sleeve Assembly - Walk Up View 1 24
Sleeve Assembly - Walk Up View 2 26
CARD READERS
Smart Dip Reader 54
MCRW 55
Latchfast Card Capture Bin Assembly 56
Contactless Card Reader 57
Contactless Card Reader 2 59
Harnesses 61
Athena Sensor Harness 61
24V Ext Harness 61
Fan Dip Harness 61
COIN DISPENSERS
Coin Dispenser Assembly View 1 62
Coin Dispenser Assembly View 2 64
Coin Dispenser Classes 65
5831 Class 65
5832 Class 66
Harnesses 67
Coin Module Harness 67
CORE
PC Core 68
Printed Circuit Boards 70
Riverside Motherboard 70
Estoril Motherboard 71
Harnesses 72
SATA DATA and Power Cable Assembly 72
Slimline SATA DATA and Power Cable Assembly 72
Audio Breakout Header Cable Assembly 72
USB Breakout Cable Assembly 73
FP Reset Cable Assembly 73
FP Reset to 12W Connector Cable Assembly 73
Core DC Harness 73
Display Port to DVI-D Female Adapter 74
Display Port to VGA Female Adapter 74
CHEQUE PROCESSING
SCPM (Scalabale Cheque Processing module) 75
SCPM View 1 75
SCPM View 2 77
SCPM View 3 79
Printed Circuit Boards 81
SCPM Stacking Bin Board Assembly 81
Harnesses 82
SCPM DC Interlock Harness 82
SCPM DC Harness 82
ERBM Interface Harness 82
SCPM Interlock Harness 82
SCPM Harness 83
SCPM to Stacking Bin PNL Mount Harness 83
SCPM Controller UDFD Harness 83
CURRENCY DEPOSIT
GBRU/GBNA 84
GBRU/GBNA Transport 84
GBRU GBNA Module Assembly 86
GBRU/GBNA Currency Cassettes 88
GBRU/GBNA Reject Bins 88
GBRU Miscellaneous Parts 89
CURRENCY DISPENSER
S2 Dispenser Retraction Assembly 109
S2 Dispenser Presenter Assembly 110
S2 Dispenser Pick Module Assembly 112
S2 Tamper Indication plates 114
Containers 115
S2 Cassette Assemblies 115
S2 Purge Bin Assemblies 116
Printed Circuit Boards 117
S2 Dispenser Control Board 117
S2 5 High & 6 High Interface PCB Assembly 117
S2 Dual Cassette ID PCB 118
DISPLAY
15 inch Display With Touchscreen 124
19 inch Display With Touchscreen 126
Display Thermal Management Module Assembly 127
Operator Panels 128
Printed Circuit Boards 129
Touchscreen Controller 129
External Temperature Sensor PCB Assembly 130
Ambient Light Sensor PCB Assembly 130
Harnesses 131
USB Touchscreen Cable Assembly 131
Flex Circuit - 12 Circuits 131
DVI-D Single Link Cable Assembly 131
KEYBOARDS
EPP Keyboard Assembly 134
Class 5815 USB EPP Layout 135
POWER SUPPLY
Power Supply Switch Mode 160
Uninterruptible Power Supply (UPS) 162
AC Distribution Assembly 163
Harnesses 164
SET Power Cord 164
Mains Cable Assembly 164
Standby PSU Harness 164
IEC Plug Cable 165
PRINTERS
Receipt Printer 166
Dual Roll Receipt Printer 168
Thermal Journal Printer 170
Page Turn Passbook Printer 171
Statement Passbook Printer 172
Universal Statement Printer 174
USB Fanfold Statement Printer 176
SECURITY ENCLOSURES
CEN Enclosures 178
Standard Locks 179
MAS Hamilton Locks 179
Electronic Locks 180
Combination Locks 180
Third Party Locks 181
REVISION
INTRODUCTION
This manual is designed to provide complete identification of all parts which may be replaced in the unit.
MANUAL ORGANIZATION
This publication is divided into chapters containing information relating to specific parts of the ATM.
Revision Record
The Revision Record at the end of this manual list of all changes to this manual since first publication.
ASSEMBLIES
Identification of Assemblies
Identification of a complete assembly, including the 10-digit number assigned to it, is included as the first
line in the parts list. The entry for the complete assembly is not identified by a reference letter.
Multiple Views
Some complex assemblies are illustrated by different views on several adjacent pages. Parts not
referenced in one view of an assembly are referenced in another. Multiple views are designated by a
notation in the title; “Cabinet Assembly (View 1 of 3)”, for example, indicates that this page contains the
first of three different views of the same assembly.
PARTS LISTS
Columns in Parts Lists
A parts list consists of three columns. The first column is the reference number identifying the part in
the illustration. The second column is the part number, and the third column is the part name.
For example:
The preceding example shows that the Gear Assembly (Ref. 4) comes with the Gear (Ref. 4A) and Hub
Assembly (Ref. 4B) assembled. The Hub Assembly comes with the Hub (Ref. 4B1) and Bearing (Ref. 4B2)
assembled. Any one of the parts can be ordered separately. The letter in parentheses at the end of an
assembly name is used by the Information Solutions Group in updating the manual.
References to Contents
Some assemblies shown on the illustration are called out with no 10-digit number listed and a reference
made to the contents. This indicates that there is a further breakdown of
Example:
Occasionally, the 10 digit number is given and also a reference is made to the contents. In this case, the
10-digit number is given as a means of identifying a particular assembly when there are other
assemblies that are similar but not interchangeable.
For example:
part name and 10-digit number in the first line of the parts chart. Occasionally, it is
expedient to add miscellaneous parts to a drawing which are not part of the assembly.
These parts are identified by a alpha/numeric reference with the alpha character “Z”.
For example:
Z1 000-0000000 Screw
Z2 000-0000001 Nut
FEATURES
A feature is a collection of parts that are related but cannot be ordered as an assembly. Where a feature
is shown there is no 10-digit assembly number. Instead the parts list will begin with reference number 1.
UPDATES
From time to time you will receive updates as the manual content is changed or added to.
ALARMS
3
5
10
SECONDARY
LOCK 7
9
8
11
1
6
4 5 2
PRIMARY SECONDARY
LOCK LOCK 7
9
1
2
C7 R20
R21 D5
R6
R12 R23
R4 D3
J1 RLY1 RLY2 C4 R30 VR1 J3
Q2
SW1
3 6 RLY4
C5
4
1 4
1 2
1
2
J2
R28
3 C6
D1 D2
R16 J4
R25
R18
ALARM TERMINATION I/F
HARNESSES
Basic Alarms Harness
502
ALM
ALM
1 2
009-0030624 BROWN
009-0030624 BLUE
Alarms Harness
CABINETRY
8
8 3
9
11
10
16 13
12
15
14
21 17 5
4
22
23
18
24
19 26 7
27
20
25
8 9 10
26
6
5 7
8
8 9
15
14
4 18 16
19
20
17
10 12
13
21 11
16
8 15
22
12
5
19
6
22
9
10
12
11
14 13 20
15
23 16
21
17
13
12
18
4 5
11
9
10
6
12
13
14
8
23
16
15
18 17
19
20
21
17
16
22
13
5 6 7
9
14
18
10
15 20
19
11 23
13 12 16
25 26
24
17
28
29
27
21 22
6 8 9
7
13
10
11 12
14
15
16
17 19
18
21 22 23
20 24
2
3
6
8
7 9 15
11
10
12
13
14
17
16
7
1 8
2
4
5
6 9 10
11
1 2 5 12 13
14
5 6
8 9
6
4
5
4
5
10
6 14
7
13 12
11
18
17
16
15
5 6 17
TOPBOX ASSEMBLY
1
15
12
16
12 3
10
14 4
13
13 6
9
11 8
7
18 11 9
17
10
19 10
8 17
14
6
3 13
5
7
4
8 14
10
15
11 16
17
12
18
23
19 22
20
21
24
25
27
26
30
29
5 7 28
6 31
8 29
NO ENGINEERING
DRAWING IS
AVAILABLE
1 5
2 3
6 7 8
9 10 11 13
12 14 15
16 19
17 18 20 21
22 24
23 25 26
HARNESSES
MEI Lower Harness
MISCIF
GND
GND
GND
CARD READERS
3 4
5
MCRW
5 6
3
7
1
2
12
11 13
10
NO ENGINEERING
DRAWING
AVAILABLE
1
2
1 1A 6 7 8
* 1 445-0736411 USB CONTACTLESS CARD READER ANTENNA ASSEMBLY WITH SHORT CABLE
* 1 445-0718404 USB CONTACTLESS CARD READER ANTENNA ASSEMBLY (SEE NOTE)
1A 009-0024448 . GASKET -USB CONTACTLESS CARD READER
* 2 009-0028950 USB CONTACTLESS CARD READER MAIN CONTROL UNIT
3 009-0026315 FCC/IC COMPLIANT LABEL (70MM x 32MM)
1 1A 6 8
7
* 1 445-0763531 USB CONTACTLESS CARD READER ANTENNA ASSEMBLY (SHORT CABLE LENGTH 545MM,
WHITE, SHORT STUD LENGTH 7.2MM, 3 STUDS)
* 1 445-0760686 KIOSK III USB CCR2 ANTENNA ASSEMBLY (LONG BLACK CABLE)
1A 009-0030949 . GASKET - KIOSK III USB CONTACTLESS CARD READER OUTSIDE ANTENNA WEATHER
GASKET
* 2 009-0030943 KIOSK III USB CONTACTLESS CARD READER MAIN CONTROL UNIT
3 009-0031192 FCC/IC COMPLIANT LABEL (70MM x 32MM) - CCR2
HARNESSES
Athena Sensor Harness
P2
SW1
P3
P7
COIN DISPENSERS
13
A B
9 15 14 12
11
16
10 5
8 4
17 18
19 22
20
21
23
2
8
4
7
5831 Class
NAME DESCRIPTION
5831 COIN DISPENSER – EXTENDED CAPACITY
5831-F001 GOLD COIN DISPENSER - TURKEY (SCER14-0619)
009-0029827 GOLD COIN DISPENSER - TURKEY
5831-F020 COIN DISPENSER (EXTENDED) TURKEY 1_5_25_100
009-0028073 DISPENSER – COIN, 4-EXTENDED HOPPER (TURKEY 1YKr, 5YKr, 25YKr, 1YTL)
5831-F021 COIN DISPENSER – EXTENDED (TURKEY 1YTL, 25YKr, 5YKr, 1YK2)
009-0028074 DISPENSER – COIN, 4-EXTENDED HOPPER (TURKEY 1YTL, 25YKr, 5YKr, 1YK2)
5831-F076 COIN DISPENSER, 4 – EXTENDED (PERU 5SOL, 5SOL, 5SOL, 5SOL)
009-0028075 DISPENSER – COIN, 4-EXTENDED HOPPER (PERU 5SOL, 5SOL, 5SOL, 5SOL)
5832 Class
NAME DESCRIPTION
5832 COIN DISPENSER – STANDARD CAPACITY
5832-F009 COIN DISPENSER LH (LEBANON 250_250_500_500)
009-0028426 DISPENSER - COIN, 4 HOPPER LH (LEBANON 500_500_250_250).
5832-F010 COIN DISPENSER LH (MEXICO 5_2_1_0.5)
009-0028416 DISPENSER - COIN, 4-HOPPER LH (MEXICO 5_2_1_0.5)
5832-F011 COIN DISPENSER LH (MEXICO 10_5_2_1)
009-0028417 DISPENSER - COIN, 4-HOPPER LH (MEXICO 10_5_2_1)
5832-F020 COIN DISPENSER LH (TURKEY 1_0.25_0.05_0.01)
009-0028420 DISPENSER - COIN, 4-HOPPER LH (TURKEY 1_25_5_1)
5832-F025 COIN DISPENSER LH (PERU 5_2_1_0.1)
009-0028423 DISPENSER - COIN, 4-HOPPER LH (PERU 5_2_1_0.10)
5832-F028 COIN DISPENSER LH (PERU 5_1_0.5_0.1)
009-0028424 DISPENSER - COIN, 4-HOPPER LH (PERU 5_1_0.5_0.1)
5832-F030 COIN DISPENSER LH (EURO 1_0.2_0.05_0.01)
009-0028421 DISPENSER - COIN, 4-HOPPER LH (EURO 0.01_0.05_0.20_1)
5832-F031 COIN DISPENSER LH (EURO 2_1_0.5_0.2)
009-0028422 DISPENSER - COIN, 4-HOPPER LH (EURO 2_1_0.5_0.2)
5832-F040 COIN DISPENSER LH (CHILE 500_100_50_10)
009-0028427 DISPENSER - COIN, 4 HOPPER LH (CHILE 500_100_50_10).
5832-F050 COIN DISPENSER LH (USA 0.25_0.25_0.05_0.05)
009-0028418 DISPENSER - COIN, 4-HOPPER LH (USA 0.25_0.25_0.05_0.05)
5832-F051 COIN DISPENSER LH (USA 0.25_0.05_0.05_0.01)
009-0028419 DISPENSER - COIN, 4-HOPPER LH (USA 0.25_0.05_0.05_0.01)
5832-F054 COIN DISPENSER LH (CANADA 1_0.25_0.10_0.05)
009-0028428 DISPENSER - COIN, 4 HOPPER LH (CANADA 1.00_0.25_0.10_0.05).
5832-F065 COIN DISPENSER LH (POLAND 2_50_10_1)
009-0028429 DISPENSER - COIN, 4 HOPPER LH (POLAND 2_50_10_1).
5832-F073 COIN DISPENSER LH (TAIWAN 50_10_5_1)
009-0028430 DISPENSER - COIN, 4 HOPPER LH (TAIWAN (2) 50_10_5_1).
5832-F096 COIN DISPENSER LH (NEW ZEALAND 2_1_0.2_0.1)
009-0028431 DISPENSER - COIN, 4 HOPPER LH (NEW ZEALAND 2.00_1.00_0.20_0.10).
5832-F105 COIN DISPENSER LH (UK 0.01_0.05_0.20_1)
009-0028425 DISPENSER - COIN, 4-HOPPER LH (UK 0.01_0.05_0.20_1)
HARNESSES
Coin Module Harness
CORE
PC CORE
2
4
6
5
11 7
9
10
5
4
3
Estoril Motherboard
3
5
4 6
HARNESSES
SATA DATA and Power Cable Assembly
Core DC Harness
CHEQUE PROCESSING
LONG INFEED
1
1 4
SHORT INFEED
MEDIUM INFEED
A 6
3A
8 9 10
11 12
13
14
15
16
SCPM View 2
17
9
2 10
NO ENGINEERING
1
DRAWING
AVAILABLE
8
7
18
6 14 15
5
4 12 13
3
11 16
19
23
20
24
25
26
21
22
SCPM View 3
4
2
1
5
11
3
7 8 9
12
10
9 9
1 1
C C
HARNESSES
SCPM DC Interlock Harness
CPM_J1
IL_SWITCH_NO
IL_SWITCH_CM
SCPM DC Harness
SCPM Harness
CURRENCY DEPOSIT
GBRU/GBNA
GBRU/GBNA Transport
9
10 11
13
3
12
14
3
6
9
7 3
4
8
3
8 7
2 A 8 B
3 7 9
10 B 12
11
2, 3
SCREW
SCREW PLATE
8,13,14
1
NO ENGINEERING
DRAWING
MID INFEED AVAILABLE
3
15
5
12
11 6
10
4
11
9
4 5
A
2
8
6
3
1
13 10
A 14
12 15
10B
10A
17 18
16
A
4
2
1 3
7
8
5
9
6
* 5 484-0106245 ASSEMBLY - SDM2 MID LONG INFEED W/O METAL DETECT - 260MM
* 6 484-0106045 ASSEMBLY - SDM2 LONG INFEED - 374MM
* 6 484-0106246 ASSEMBLY - SDM2 LONG INFEED W/O METAL DETECT - 374MM
* 7 484-0106378 CORE - SDM2
* 8 484-0102774 ASSEMBLY - TRAY WITH LIFT MECHANISM
NOTE: AN ESCROW FULL MICROSWITCH TEST PROCEDURE HAS BEEN CHECKED IN UNDER
REFERENCE DOCUMENTS
A
1 2
4 4
5
4
B
A
1 3
4
5
4A
4B 6
8
9
9
2
10
11
12
13
A B 19 21 23 24
18
14 15
16 17
20 22
NO ENGINEERING
DRAWING
AVAILABLE
NO ENGINEERING
DRAWING
AVAILABLE
HARNESSES
GBRU GBNA Harnesses
GBRU 12C Enable Harness
BPWR
BPWR
MEI
* 009-0022180 CABLE ASSEMBLY (SHUTTER MEI)
BNA Harnesses
BNA3 Harness
SDM Harnesses
SDM2 DC Interlock Harness
CURRENCY DISPENSER
1A 1A
1
1A
A
A B
1B 1C
1BA
1
2
S2 DISPENSER RA
7
6
5
4
3
14
13
12
10 11 15
1
B
A B
8
7
C
9 4
11
15
10
5
16
14
12
D 13
2 3
CONTAINERS
S2 Cassette Assemblies
1
7 4
3
NO ENGINEERING
DRAWING IS
AVAILABLE
NO ENGINEERING
DRAWING IS
AVAILABLE
"
"
"
)
"
"
"
+
"
" "
" "
"
""
"+ "
" "
" "
" ""
" "
"
"" " "
" " "
" "
"
"+
" "
# + ""
" " " " " "
" "
" +
" "
" "
) ""
"
" )+
+ "
" "
+ # "
"" " + + "+
"
"# "#
" "
+ " "
" " "
" " #
"+ " #
" #+
+ + + + + "
+ + " "
+ + + "
+ " #"" " " +
) " + + + + + " #
" # " #" +
"+
" " " "
"" ""
+
" +
" " "
"
HARNESSES
S2 Presenter Harness
SNT Harness
WK xx/YR xx
445-073xxxx
Rev. x
DISPLAY
2
4 6
1
3 3
5 7
1 4
2 3
OPERATOR PANELS
HARNESSES
USB Touchscreen Cable Assembly
* 009-0020701 CABLE USB TYPE A TO TYPE MINI B HIGH SPEED (480MBPS) (500MM)
* 009-0020702 CABLE USB TYPE A TO TYPE MINI B HIGH SPEED (480MBPS) (1000MM)
* 009-0020704 CABLE USB TYPE A TO TYPE MINI B HIGH SPEED (480MBPS) (1500MM)
* 009-0020708 CABLE USB TYPE A TO TYPE MINI B HIGH SPEED (480MBPS) (2000MM)
* 009-0020710 CABLE USB TYPE A TO TYPE MINI B HIGH SPEED (480MBPS) (2500MM)
* 009-0020712 CABLE USB TYPE A TO TYPE MINI B HIGH SPEED (480MBPS) (3000MM)
* 009-0020715 CABLE USB TYPE A TO TYPE MINI B HIGH SPEED (480MBPS) (4000MM)
KEYBOARDS
SHUTTER ASSEMBLY
BARCODE READER
5
2
BARCODE READER TEST DOCUMENT
1
2
CAMERA BRACKETS
1 2 3 4 5
6
7 8
9
4
3
SENSOR ASSEMBLIES
1
2
4
MEEI
1
3 5
7
4 6 8
ID SCANNER
1 3
2
4
5 6
* 1 009-0030289 ID SCANNER
2 445-0757006 HLA - DUT ID INSERT
3 445-0754323 ID MTG BRKT
4 445-0754790 MEI MTG
5 445-0751437 ID SCANNER MOUNTING BRACKET ASSEMBLY
LABELS
2
1
3
HANDSET
1
HARNESSES
RIO Enable Harness
Turnaround Harness
DC Camera Harness
* 009-0030312 STEREO MICROPHONE ARRAYFOR USE WITH STEREO MICROPHONE ARRAY DSP
POWER SUPPLY
10
5
10
9
8 9
7
7
6
3
3
2
AC DISTRIBUTION ASSEMBLY
3
1
HARNESSES
SET Power Cord
PRINTERS
RECEIPT PRINTER
8
5 A
6
1
3
4
2
A
B
8
7
6
3
2
5
B
9 1
NOTE: ITEM 4 CONSISTS OF DUAL FEED MECHANISM, DUAL ROLL PAPER LOW SENSOR, DUAL
ROLL PCB AND DUAL ROLL FLAT CABLE.
3
4
4
1
2
5
8
6 7
6
1C
1E
1D
1A
1B
2C
2E
2D
2A
2B
SECURITY ENCLOSURES
CEN ENCLOSURES
1 2 6
5 7
3
4 8
9
STANDARD LOCKS
1
CHANGE TOOL
ELECTRONIC LOCKS
1
COMBINATION LOCKS
1 2
4
3
1
2
3 4 8 5
6 7
10 11
12
HARNESSES
SPS Control PCB to Capacitor PCB Harness
SPS Harness
* 445-0760572 SPS DIP DRIVER PCB TO CONTROL PCB LINKER HARNESS (0.61M)
* 445-0760573 SPS DIP DRIVER PCB TO CONTROL PCB LINKER HARNESS (0.67M)
* 445-0760574 SPS DIP DRIVER PCB TO CONTROL PCB LINKER HARNESS (0.79M)
REVISION
Revision Description Page Date
A First Publication All August
2016
B S1-S2 Polymer Updates, CCR2 Updates All March 2017
C PIM RSPL Updates All December
2017
FinancialHWL3.Support@ncr.com