Scribd
Upload
14 views1 page

V100H4

The document specifies the material purchase requirements for a gate valve (V-100H4) with a Class 600 rating, detailing materials such as carbon steel for the body and bonnet, and specific trim materials. It includes notes on general valve specifications, acceptable manufacturers' standards, and equivalents from various manufacturers. Additional notes clarify the acceptable types of wedges and packing materials based on valve size and reference to general requirements for valves.

Uploaded by

leocastarlenas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views1 page

V100H4

The document specifies the material purchase requirements for a gate valve (V-100H4) with a Class 600 rating, detailing materials such as carbon steel for the body and bonnet, and specific trim materials. It includes notes on general valve specifications, acceptable manufacturers' standards, and equivalents from various manufacturers. Additional notes clarify the acceptable types of wedges and packing materials based on valve size and reference to general requirements for valves.

Uploaded by

leocastarlenas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GENERAL EQUIPMENT AND MATERIAL SPECIFICATION SECTION I V-100H4

MATERIAL PURCHASE - VALVE SPECIFICATION BOOK ISSUE DATE: 12/31/98

TAG :V-100H4
ITEM :GATE SOLID/FLEX WEDGE(API 600)(185)
RATING :CLASS 600
END CONNECTION :FLG RF
BODY & BONNET :CARBON STEEL
MATERIAL SPEC. :A216 GR WCB
TRIM MATERIAL :TRIM NO 8(13%CR-1/2HF)
STEM :OS&Y
BONNET TYPE :BOLTED
BONNET GASKET :MS
PACKING GLAND :BOLTED
PACKING MAT'L. :MS (166)
SEAT TYPE :MS
SAMPLE :CRANE, 76XUF (8)

NOTES:
1 GENERAL VALVE SPECIFICATIONS DO NOT COVER SPECIAL ITEMS SUCH AS
BODY BOSSES AND TAPS, BODY BYPASSES AND ADDITIONAL VALVE
OPERATION ASSISTS SUCH AS BEVEL, WORM GEARS OR SPECIAL LEVERS.
WHERE REQUIRED, SUCH ITEMS MUST BE ADDED TO BILL OF MATERIAL AND
REQUISITION.
2 "MS" INDICATES MANUFACTURERS STANDARD CONSTRUCTION IS ACCEPTABLE
AS LONG AS IT MEETS THE APPLICABLE STANDARDS.
3 FOR GENERAL REQUIREMENTS (e.g., CODES, TESTING, TAGGING) REFER
TO GEMS J-1M, MATERIAL PURCHASE - VALVES.

NOTES THAT APPLY ONLY WHERE INDICATED IN THE PARENTHESES ABOVE:


185 SOLID OR FLEXIBLE WEDGES ARE ACCEPTABLE FOR VALVES 4" AND
SMALLER. VALVES 6" AND LARGER SHALL HAVE FLEXIBLE WEDGES.
166 STEM PACKING MATERIALS SHALL BE IN ACCORDANCE WITH GEMS J-1M,
VALVES - MATERIAL PURCHASE, APPENDIX-A "VALVE STEM PACKING".
8 THE PATTERN OF VALVE CONSTRUCTION SHALL BE SIMILAR TO SAMPLE
MANUFACTURERS FIGURE NUMBER INDICATED. MATERIALS OF VALVE SHALL
BE AS SPECIFIED ABOVE.

EQUIVALENTS OF VALVE V-100H4


AIL 163-8(2-20)(INDIA)
CRANE 76XUF(2-24)(ITALY) 12/88 OR LATER
KITZ 600SCLB(2-14)(JAPAN)
KITZ 600SCLS(16-24)(JAPAN)
NEWCO 16F-CB2(2-10)(TAIWAN)
PACIFIC 2655-U(3-36)(USA)
POWELL 6003-WCB(2-18)(USA)
POYAM 22SBF3R08(1 1/2-24)(SPAIN)
RAIMONDI (12/88 OR LATER) 3011-RF-WCB-08(2-24)(ITALY)
VELAN F00-2064C-02TY(2-24)(USA+CANADA)
WALWORTH 5232F-UT(2-24)(MEXICO) 3/89 OR LATER

You might also like