spare-switch_01(config-if)#end
spare-switch_01#
%SYS-5-CONFIG_I: Configured from console by console
spare-switch_01#pin
spare-switch_01#ping 192.168.75.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.75.2, timeout is 2 seconds:
..!!!
Success rate is 60 percent (3/5), round-trip min/avg/max = 0/1/5 ms
spare-switch_01#co
spare-switch_01#co
spare-switch_01#en
spare-switch_01#conf t
Enter configuration commands, one per line. End with CNTL/Z.
spare-switch_01(config)#co
spare-switch_01(config)#exit
spare-switch_01#
%SYS-5-CONFIG_I: Configured from console by console
spare-switch_01#copy tftp f;
spare-switch_01#copy tftp fl
spare-switch_01#copy tftp flash:
Address or name of remote host []? 192.168.75.2
Source filename []? MDF-1_vlan.dat
Destination filename [MDF-1_vlan.dat]? vlan.dat
%Warning:There is a file already existing with this name
Do you want to over write? [confirm]
Accessing tftp://192.168.75.2/MDF-1_vlan.dat...
Loading MDF-1_vlan.dat from 192.168.75.2: !
[OK - 916 bytes]
916 bytes copied in 0 secs
spare-switch_01#dir fla
spare-switch_01#dir flash:
Directory of flash:/
1 -rw- 4670455 <no date> 2960-lanbasek9-mz.150-2.SE4.bin
4 -rw- 1089 <no date> config.text
5 -rw- 916 <no date> vlan.dat
64016384 bytes total (59343924 bytes free)
spare-switch_01#copy tftp
spare-switch_01#copy tftp: star
spare-switch_01#copy tftp: startup-config
Address or name of remote host []? 192.168.75.2
Source filename []? MDF-1_startup-config
Destination filename [startup-config]? startup-config
Accessing tftp://192.168.75.2/MDF-1_startup-config...
Loading MDF-1_startup-config from 192.168.75.2: !
[OK - 3012 bytes]
3012 bytes copied in 0 secs
spare-switch_01#dir nv
spare-switch_01#dir nvram:
Directory of nvram:/
238 -rw- 2838 <no date> startup-config
2838 bytes total (237588 bytes free)
spare-switch_01#dir nvram
Directory of nvram:/
238 -rw- 2838 <no date> startup-config
2838 bytes total (237588 bytes free)
spare-switch_01#re
spare-switch_01#reload
System configuration has been modified. Save? [yes/no]:no
Proceed with reload? [confirm]
C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE
SOFTWARE (fc4)
Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes
of memory.
2960-24TT starting...
Base ethernet MAC Address: 0030.A327.7520
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 3 files, 0 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 64016384
flashfs[0]: Bytes used: 4674383
flashfs[0]: Bytes available: 59342001
flashfs[0]: flashfs fsck took 1 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading "flash:/2960-lanbasek9-mz.150-2.SE4.bin"...
##############################################
############################ [OK]
Smart Init is enabled
smart init is sizing iomem
TYPE MEMORY_REQ
TOTAL: 0x00000000
Rounded IOMEM up to: 0Mb.
Using 6 percent iomem. [0Mb/512Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version
15.0(2)SE4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 26-Jun-13 02:49 by mnguyen
Initializing flashfs...
fsck: Disable shadow buffering due to heap fragmentation.
flashfs[2]: 2 files, 1 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 32514048
flashfs[2]: Bytes used: 11952128
flashfs[2]: Bytes available: 20561920
flashfs[2]: flashfs fsck took 2 seconds.
flashfs[2]: Initialization complete....done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not required (Stage 2)
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
Waiting for Port download...Complete
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be
found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C2960-24TT-L (PowerPC405) processor (revision B0) with 65536K
bytes of memory.
Processor board ID FOC1010X104
Last reset from power-on
1 Virtual Ethernet interface
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:30:A3:27:75:20
Motherboard assembly number : 73-10390-03
Power supply part number : 341-0097-02
Motherboard serial number : FOC10093R12
Power supply serial number : AZS1007032H
Model revision number : B0
Motherboard revision number : B0
Model number : WS-C2960-24TT-L
System serial number : FOC1010X104
Top Assembly Part Number : 800-27221-02
Top Assembly Revision Number : A0
Version ID : V02
CLEI Code Number : COM3L00BRA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TT-L 15.0(2)SE4 C2960-LANBASEK9-M
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version
15.0(2)SE4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 26-Jun-13 02:49 by mnguyen
Press RETURN to get started!
%LINK-5-CHANGED: Interface Port-channel1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel1, changed
state to up
%LINK-5-CHANGED: Interface Port-channel2, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel2, changed
state to up
