Datasheet

Chimei Innolux
G154I1-LE1
CH-01-033

The information contained in this document has been carefully researched and is, to the best
of our knowledge, accurate. However, we assume no liability for any product failures or
damages, immediate or consequential, resulting from the use of the information provided
herein. Our products are not intended for use in systems in which failures of product could
result in personal injury. All trademarks mentioned herein are property of their respective
owners. All specifications are subject to change without notice.
 PRODUCT SPECIFICATION

Doc. Number : DN0259914

□ Tentative Specification
□ Preliminary Specification
■ Approval Specification

MODEL NO.: G154I1

SUFFIX: LE1
Customer:

APPROVED BY SIGNATURE

Name / Title
Note

Please return 1 copy for your confirmation with your

signature and comments.

Approved By Checked By Prepared By

yuhsiang.chang clark.kuo Thurston.in

(張喻翔/514-10922) (郭鐘亮/514-10921) (林群祥/514-10927)

2011-12-20 2011-12-13 2011-12-13

09:16:53 CST 14:39:38 CST 12:10:10 CST

Version 2.3 12th, Dec., 2011 1 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

- CONTENTS -
REVISION HISTORY .............................................................................................................................3

1. GENERAL DESCRIPTION.................................................................................................................4
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS .....................................................................................................5

2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS...................................................................................................7
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM .............................................................................................................................10

4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT ..............................................................................................11

5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING .........................................................................................................................15

7.1 INPUT SIGNAL TIMING SPECIFICATIONS
7.2 POWER ON/OFF SEQUENCE
7.3 VDD POWER DIP CONDITION

7. OPTICAL CHARACTERISTICS .........................................................................................................18

7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS

8. Reliability Test Criteria ....................................................................................................................21

9. PACKAGING......................................................................................................................................22
9.1 PACKING SPECIFICATIONS
9.2 PACKING METHOD

10. DEFINITION OF LABELS ................................................................................................................24

11. PRECAUTIONS ...............................................................................................................................25

11.1 ASSEMBLY AND HANDLING PRECAUTIONS
11.2 SAFETY PRECAUTIONS

12. MECHANICAL CHARACTERISTICS ...............................................................................................26

Version 2.3 12th, Dec., 2011 2 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

REVISION HISTORY

Version Date Section Description

th
Ver 2.0 18 , Mar., 2011 All G154I1-LE1 Approval specification was first issued.

th
Ver 2.1 12 , Aug., 2011 3.2 Backlight Unit – Added Note (4)
Modified PWM Control Duty (Min 20%
2%)
Modified PWM Control Frequency (Max 210
20KHz)

th
Ver 2.2 28 , Nov., 2011 12 Mechanical Drawing
Note(2) Correction to I/F connector part number
Note(3) Correction to LED connector part number

th
Ver 2.3 12 , Dec., 2011 5.3 Add 8bit Data Format

Version 2.3 12th, Dec., 2011 3 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

1. GENERAL DESCRIPTION
1.1 OVERVIEW
The G154I1-LE1 model is a 15.4” TFT-LCD module with a white LED Backlight Unit and a 30-pin 1ch-LVDS
interface. This module supports 1280 x 800 WXGA mode and displays 262k/16.2M colors. The converter
for the Backlight Unit is built in.

1.2 FEATURES
- WXGA (1280 x 800 pixels) resolution
- Wide operating temperature
- DE (Data Enable) mode
- LVDS (Low Voltage Differential Signaling) interface
- RoHS Compliance
- LED Light Bar Replaceable
- Reverse Scan

1.3 APPLICATION
- TFT LCD Monitor
- Industrial Application
- Amusement

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note
Diagonal Size 15.4 inch
Active Area 331.2(H) x 207.0(V) mm (1)
Bezel Opening Area 334.5 x 210.3 mm
Driver Element a-si TFT active matrix - -
Pixel Number 1280 x R.G.B. x 800 pixel -
Pixel Pitch 0.259(H) x 0.259(V) mm -
Pixel Arrangement RGB vertical stripe - -
Display Colors 262k/16.2M color -
Transmissive Mode Normally white - -
Surface Treatment AG, 3H - -

Version 2.3 12th, Dec., 2011 4 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note
Horizontal (H) 351.5 352 352.5 mm
Module Size Vertical (V) 229.5 230 230.5 mm (1)
Depth (D) 8.5 9 9.5 mm
Weight 880 g -
I/F connector mounting The mounting inclination of the connector makes
- (2)
position the screen center within ±0.5mm as the horizontal.
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
(2) Connector mounting position

+/- 0.5mm

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Value
Item Symbol Unit Note
Min. Max.
Operating Ambient Temperature TOP -30 +80 ºC
Storage Temperature TST -30 +80 ºC

Note Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta ≦ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.

Version 2.3 12th, Dec., 2011 5 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE
Value
Item Symbol Unit Note
Min. Max.
Power Supply Voltage Vcc -0.3 4.0 V (1)
Logic Input Voltage VIN -0.3 Vcc+0.3 V (1)

2.2.2 BACKLIGHT UNIT

Value
Item Unit Note
Min Typ. Max.
LED Light Bar Input voltage - 28 - VDC
(1), (2)
LED Light Bar Input Current - 320 - mADC
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for LED (Refer to Section 3.2 for further information).

Version 2.3 12th, Dec., 2011 6 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Value
Parameter Symbol Unit Note
Min. Typ. Max.
Power Supply Voltage Vcc 3.0 3.3 3.6 V at Vcc=3.3V
Ripple Voltage VRP - 50 mV -
Rush Current IRUSH - - 1.5 A (2)
Initial Stage Current IIS - - 1.0 A (2)
White - 400 500 mA (3)a, at Vcc=3.3V
Power Supply Current Icc
Black - 550 650 mA (3)b, at Vcc=3.3V
LVDS Differential Input High Threshold VTH(LVDS) - - +100 mV VCM=1.2V
LVDS Differential Input Low Threshold VTL(LVDS) -100 - - mV VCM=1.2V
LVDS Common Mode Voltage VCM 1.125 - 1.375 V
LVDS Differential Input Voltage |VID| 100 - 600 mV
Terminating Resistor RT - 100 - Ohm
Note (1) The assembly should be always operated within above ranges.
Note (2) Measurement Conditions:

+3.3V

Q1 2SK1475

Vcc
C3
FUSE
(LCD Module Input)

R1 1uF

47K

(High to Low)
(Control Signal)
Q2
R2

SW 2SK1470

1K
+12V

47K C2
VR1

C1
0.01uF

1uF

Version 2.3 12th, Dec., 2011 7 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

VCC rising time is 470us

+3.3V

0.9Vcc

0.1Vcc

GND
470µs

Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, fv = 60
Hz, whereas a power dissipation check pattern below is displayed.

a. White Pattern b. Black Pattern

Active Area Active Area

c. Vertical Stripe Pattern

R G B R G B

B R G B R G B R

B R G B R G B R

R G B R G B

Active Area

Version 2.3 12th, Dec., 2011 8 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC

Value
Parameter Symbol Unit Note
Min. Typ. Max.
Converter Power Supply Voltage Vi 10.8 12.0 13.2 V (Duty 100%)
@ Vi = 12V
Converter Power Supply Current Ii 750 850 950 mA
(Duty 100%)
@ Vi = 12V
LED Power Consumption PLED 9.0 10.2 11.4 W
(Duty 100%)
Backlight on 2.0 3.3 5.0 V
EN Control Level BLU_EN
Backlight off 0 --- 0.8 V
PWM High Level 2.0 3.3 5.0 V
PWM Control Level BLU_ADJ
PWM Low Level 0 --- 0.15 V
PWM Control Duty Ratio 2 100 % @200Hz, (4)
PWM Control Frequency fPWM 190 200 20K Hz (4)
If= 80
LED Input Voltage Vf - 3.2 - VDC
mA/EA
LED Current If - 80 - mA Per EA
LED Life Time LL 50,000 Hrs (1)
Note (1) LED current is measured by utilizing a high frequency current meter as shown below:
Note (2) The lifetime of LED is defined as the time when it continues to operate under the conditions at
Ta = 25 ±2 ℃ and ILED = 80mADC(LED forward current) until the brightness becomes ≦ 50% of its
original value. Operating LED under high temperature environment will reduce life time and lead to
color shift.
Note (3) PL = Io ×Vo

Note (4) :At 190 ~1KHz PWM control frequency, duty ratio range is restricted from 2% to 100%.
1K ~20KHz PWM control frequency，minimum duty on-time ≧ 20 us.

Version 2.3 12th, Dec., 2011 9 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

4. BLOCK DIAGRAM
4.1 TFT LCD MODULE

LVDS INPUT /

SCAN DRIVER IC
RX0(+/-)
TIMING CONTROLLER
RX1(+/-)
TFT LCD PANEL
(Starconn 093G30-B0001A-G4 )

RX2(+/-)
RX3(+/-)
INPUT CONNECTOR

RXCLK(+/-)

VCC DC/DC CONVERTER &

SEL 6/8 REFERENCE VOLTAGE
GENERATOR DATA DRIVER IC
Reverse
GND

VLED

Dimming

ENLED
LED
BACKLIGHT UNIT
CONVERTER

Version 2.3 12th, Dec., 2011 10 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE
Pin Name Description Remark
1 12V LED Power supply LED converter power
2 12V LED Power supply
3 12V LED Power supply
4 12V LED Power supply
5 ENLED Enable Pin
6 Dimming Backlight Adjust
7 GND Ground
8 GND Ground
9 VCC Power supply +3.3V System power
10 VCC Power supply +3.3V
11 GND Ground
12 GND Ground
13 RX0- Differential Data Input, CH0 (Negative )
14 RX0+ Differential Data Input, CH0 ( Positive )
15 GND Ground
16 RX1- Differential Data Input, CH1 ( Negative )
17 RX1+ Differential Data Input , CH1 ( Positive )
18 GND Ground
19 RX2- Differential Data Input , CH2 ( Negative )
20 RX2+ Differential Data Input , CH2 ( Positive )
21 GND Ground
22 RXCLK- Differential Clock Input ( Negative )
23 RXCLK+ Differential Clock Input ( Positive )
24 GND Ground
25 RX3- Differential Data Input, CH3 (Negative )
26 RX3+ Differential Data Input, CH3 ( Positive )
27 GND Ground
LVDS 6/8 bit select function control,
28 SEL6/8 Low or NC
6 bit Input Mode (2)
High
8bit Input Mode
Scanning direction control
29 Reverse Low or NC
normal display (default) (2)
High
display with 180 degree rotation
30 GND Ground
Note (1) Connector Part No.: STARCONN 093G30-B1001A-G4 or equivalent.
Note (2) “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for “No Connected”.

Version 2.3 12th, Dec., 2011 11 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

5.2 SCANNING DIRECTION

The following figures are seen from a front view and the arrow shows the direction of scan.

Reverse = GND/NC : normal display (default) Reverse = High : display with 180 degree rotation

Version 2.3 12th, Dec., 2011 12 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 6/8-bit gray scale data input
for the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.

5.3.1 For 6-Bits

Data Signal
Color Red Green Blue
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Basic Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Colors Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Red(0) /Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
Gray Red(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Scale . . . . . . . 0 0 0 0 0 0 0 0 0 0 0 0
of . . . . . . . 0 0 0 0 0 0 0 0 0 0 0 0
Red Red(61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0
Red(62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Green(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
Gray Green(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0
Scale . 0 0 0 0 0 0 . . . . . . 0 0 0 0 0 0
of . 0 0 0 0 0 0 . . . . . . 0 0 0 0 0 0
Green Green(61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0
Green(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0
Green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Blue(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Gray Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Scale . 0 0 0 0 0 0 0 0 0 0 0 0 . . . . . .
of . 0 0 0 0 0 0 0 0 0 0 0 0 . . . . . .
Blue Blue(61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1
Blue(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
Blue(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1

Version 2.3 12th, Dec., 2011 13 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

5.3.2 For 8-Bits

Data Signal
Color Red Green Blue
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Basic Blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Colors Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Red(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(1) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Gray Red(2) 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Scale . . . . . . . . . 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
of . . . . . . . . . 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red Red(253) 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
Gray Green(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
Scale . 0 0 0 0 0 0 0 0 . . . . . . . . 0 0 0 0 0 0 0 0
of . 0 0 0 0 0 0 0 0 . . . . . . . . 0 0 0 0 0 0 0 0
Green Green(253) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0
Green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
Green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Blue(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Gray Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Scale . 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 . . . . . . . .
of . 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 . . . . . . . .
Blue Blue(253) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1
Blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
Blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

Version 2.3 12th, Dec., 2011 14 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
DCLK Frequency 1/Tc 67.45 71 74.55 MHz -
Vertical Total Time TV 810 823 1000 TH -
Vertical Addressing Time TVD 800 800 800 TH -
DE
Horizontal Total Time TH 1360 1440 1600 Tc -
Horizontal Addressing Time THD 1280 1280 1280 Tc -
Note：(1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be set
to low logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

Tv
TVD

DE

TH

DCLK
TC
THD
DE

DATA

Version 2.3 12th, Dec., 2011 15 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD assembly, the power on/off sequence should be as the diagram
below.

0.9VCC 0.9VCC
90%
0.1VCC 0.1VCC
VCC
10%
T1 T7
T2
T3
VALID T4
LVDS

0.9Vi 0.9Vi

0.1Vi 0.1Vi
Vi

T5 T6

90%

BL ON/OFF 10%

T8 T9

90%
PWM DIMMING 10%

Power ON/OFF sequence

Note (1) Please avoid floating state of interface signal at invalid period.
Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD VCC to 0 V.
Note (3) The Backlight converter power must be turned on after the power supply for the logic and the interface
signal is valid. The Backlight converter power must be turned off before the power supply for the logic
and the interface signal is invalid.

Value
Parameter Units
Min Typ Max
T1 0.5 - 10 ms
T2 0 - 50 ms
T3 0 - 50 ms
T4 500 - - ms
T5 200 - - ms
T6 20 - - ms
T7 5 - 300 ms
T8 10 - - ms
T9 10 - - ms

Version 2.3 12th, Dec., 2011 16 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

6.3 The Input Data Format

SEL 6/8 = “LOW” or “NC” for 6 Bits LVDS.

SEL 6/8 = “High” for 8 Bits LVDS.

Note (1) R/G/B data 7: MSB, R/G/B data 0: LSB

Note (2) Please follow PSWG

Version 2.3 12th, Dec., 2011 17 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
o
Ambient Temperature Ta 25±2 C
Ambient Humidity Ha 50±10 %RH
Supply Voltage VCC 3.3 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
Converter PWM duty 100%

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items
should be measured under the test conditions described in 7.1 and stable environment shown in Note (5).
Item Symbol Condition Min. Typ. Max. Unit Note
Rx 0.601 -
Red
Ry 0.340 -
Gx 0.332 -
Green
Color Gy Typ - 0.583 Typ + -
θx=0°, θY =0°
(1), (5)
Chromaticity Bx 0.05 0.149 0.05 -
Blue
By CS-1000 0.087 -
Wx 0.313 -
White
Wy 0.329 -
Center Luminance of White LC 350 450 - - (4), (5)
Contrast Ratio CR 500 700 - - (2), (5)
θx=0°, θY =0°
TR - 5 10 ms
Response Time (3)
TF - 11 16 ms
White Variation δW θx=0°, θY =0° - 1.25 1.4 - (5), (6)
θx+ 70 80 -
Horizontal
θx- 70 80 -
Viewing Angle Deg. (1), (5)
θY+
CR≥10
60 70 -
Vertical
θY- 60 70 -

Version 2.3 12th, Dec., 2011 18 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

Note (1) Definition of Viewing Angle (θx, θy):

Normal
θx = θy = 0º

θy- θy+

θX- = 90º x- 12 o’clock direction

y+
θx− θy+ = 90º
θx+

6 o’clock
y- x+ θX+ = 90º
θy- = 90º

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L63 / L0
L63: Luminance of gray level 63
L 0: Luminance of gray level 0
CR = CR (5)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Note (3) Definition of Response Time (TR, TF) and measurement method:

Gray Level 63 Gray Level 63

100%

90%

Optical
Response

Gray Level 0
1

Time
TR TF

66.67 ms 66.67 ms

Version 2.3 12th, Dec., 2011 19 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

Note (4) Definition of Luminance of White (LC):

Measure the luminance of gray level 63 at center point
LC = L (5)
L (x) is corresponding to the luminance of the point X at Figure in Note (6).

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.

LCD Module

LCD Panel

USB2000 CS-1000T

Center of the Screen

Light Shield Room
500 mm
(Ambient Luminance < 2 lux)

Version 2.3 12th, Dec., 2011 20 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

Note (6) Definition of White Variation (δW):

Measure the luminance of gray level 63 at 5 points

Maximum [L (1), L (2), L (3), L (4), L (5)]

δW =
Minimum [L (1), L (2), L (3), L (4), L (5)]

Horizontal Line
D
D/4 D/2 3D/4
Vertical Line

W/4 1 2

W W/2 5 X : Test Point

X=1 to 5
3W/ 3 4

Active Area

8. Reliability Test Criteria

Test Item Test Condition Note

High Temperature Storage Test 80ºC, 240 hours
Low Temperature Storage Test -30ºC, 240 hours
Thermal Shock Storage Test -30ºC, 0.5hour←→80℃, 0.5hour; 1hour/cycle,100cycles
High Temperature Operation Test 80ºC, 240 hours (1)(2)(4)
Low Temperature Operation Test -30ºC, 240 hours
High Temperature & High Humidity
60ºC, 90%RH, 240hours
Operation Test
Shock (Non-Operating) 50G, 11ms, half sine wave, 1 time for ± X, ± Y, ± Z. (3)(4)
Vibration (Non-Operating) 1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z (3)(4)

Note (1) There should be no condensation on the surface of panel during test.
Note (2) Temperature of panel display surface area should be 80 ºC Max.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification
is judged before reliability test.

Version 2.3 12th, Dec., 2011 21 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

9. PACKAGING
9.1 PACKING SPECIFICATIONS
(1) 13pcs LCD modules / 1 Box
(2) Box dimensions: 465(L) X 362 (W) X 314 (H) mm
(3) Weight: approximately 11 Kg (13 modules per box)

9.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items.

Test Item Test Conditions Note

ISTA STANDARD
Random, Frequency Range: 2 – 200 Hz
Vibration Top & Bottom: 30 minutes (+Z), 10 min (-Z), Non Operation
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)
Dropping Test 1 Angle, 3 Edge, 6 Face, 61 cm Non Operation

Figure. 9-1 Packing method

Version 2.3 12th, Dec., 2011 22 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

Sea / Land Transportation (40ft Container) Air Transportation

Figure. 9-2 Packing method

Version 2.3 12th, Dec., 2011 23 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

10. DEFINITION OF LABELS

10.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

E207943
G154I1 -LE1 Rev.XX MADE IN TAIWAN

RoHS
XXXXXXXYMDLNNNN

(a) Model Name: G154I1-LE1

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
(c) CMO barcode definition:
Serial ID: XX-XX-X-XX-YMD-L-NNNN
Code Meaning Description
XX CMO internal use -
XX Revision Cover all the change
X CMO internal use -
XX CMO internal use -
Year: 2001=1, 2002=2, 2003=3, 2004=4…
YMD Year, month, day Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.

L CMO internal use -

NNNN Serial number Manufacturing sequence of product

Version 2.3 12th, Dec., 2011 24 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
 PRODUCT SPECIFICATION

11. PRECAUTIONS
11.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil
may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will
be damaged.
(4) Always follow the correct power sequence when LCD module is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage
LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD module within
the specified storage conditions.
(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly, and the starting voltage of CCFL will be higher than room
temperature.
(11) Do not keep same pattern in a long period of time. It may cause image sticking on LCD.

11.2 SAFETY PRECAUTIONS

(1) Do not disassemble the module or insert anything into the Backlight unit.
(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(3) After the module’s end of life, it is not harmful in case of normal operation and storage.

Version 2.3 12th, Dec., 2011 25 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Our company network supports you worldwide with offices in Germany, Great Britain, Italy, Turkey and the
USA. For more information please contact:

Distec GmbH Display Technology Ltd.

Augsburger Str. 2b 5 The Oaks Business Village
82110 Germering Revenge Road, Lordswood
Germany Chatham, Kent, ME5 8LF
United Kingdom
Phone: +49 (0)89 / 89 43 63-0 Phone: +44 (0)1634 / 67 27 55
Fax: +49 (0)89 / 89 43 63-131 Fax: +44 (0)1634 / 67 27 54
E-Mail: info@datadisplay-group.de E-Mail: info@datadisplay-group.co.uk
Internet: www.datadisplay-group.de Internet: www.datadisplay-group.co.uk

Apollo Display Technologies, Corp.

87 Raynor Avenue, Unit 1Ronkonkoma, NY
11779
United States of America
Phone: +1 631 / 580-43 60
Fax: +1 631 / 580-43 70
E-Mail: info@datadisplay-group.com
Internet: www.datadisplay-group.com

Sales Partner: Sales Partner:

REM Italy s.a.s. DATA DISPLAY BİLİŞİM TEKNOLOJİLERİ

di Michieletto Flavio & C. İÇ VE DIŞ TİCARET LİMİTED ŞİRKETİ
Via Obbia Bassa, 10 Barbaros Mh Ak Zamabak Sk A Blok
I-35010 Trebaseleghe (PD) D:143 Ataşehir/İstanbul
Italy Turkey
Phone: +39 335 521 37 89 Phone: +90 (0)216 / 688 04 68
E-Mail: info@remitaly.com Fax: +90 (0)216 / 688 04 69
Internet:www.remitaly.com E-Mail: info@data-display.com.tr
Internet:www.data-display.com.tr