NOTES:

__________________________________________________________ Technical Education and Skills Development

Authority
__________________________________________________________
KING’S COLLEGE OF THE PHIL.
__________________________________________________________ Pico Road, La Trinidad, Benguet
__________________________________________________________ TRAINEE’S RECORD BOOK
__________________________________________________________

__________________________________________________________

__________________________________________________________ I.D.
__________________________________________________________

__________________________________________________________

__________________________________________________________ Trainee’s No._________

__________________________________________________________ TRAINEE’S NAME:

__________________________________________________________ __________________________________________
__________________________________________________________ QUALIFICATION:
__________________________________________
__________________________________________________________ TRAINING DURATION:
__________________________________________
__________________________________________________________
TRAINER:
__________________________________________
INSTRUCTIONS:
This Trainees’ Record Book (TRB) is intended to serve as UNIT OF COMPETENCY: Service Automotive Battery
NC Level II
record of all accomplishment/task/activities while
undergoing training in the industry. It will eventually Learning Task/Activity Date Instructors
become evidence that can be submitted for portfolio Outcome Required Accomplished Remarks
assessment and for whatever purpose it will serve you. It is Read Information
therefore important that all its contents are viably entered Sheet 1.1-1
Test automotive
Answer Self-Check
by both the trainees and instructor. battery
1.1-1
Do Task Sheet 1.1-1
The Trainees’ Record Book contains all the required Remove and Read Information
competencies in your chosen qualification. All you have to replace Sheet 1.2-1
do is to fill in the column “Task Required” and “Date b Answer Self-Check
at 1.2-1
Accomplished” with all the activities in accordance with the te Do Task Sheet 1.2-1
training program and to be taken up in the school and with ri
es
the guidance of the instructor. The instructor will likewise Read Information
indicate his/her remarks on the “Instructors Remarks” Sheet 1.3-1
Service and
column regarding the outcome of the task accomplished by Answer Self-Check
charge batteries
1.3-1
the trainees. Be sure that the trainee will personally Do Task Sheet 1.3-1
accomplish the task and confirmed by the instructor. Read Information
Sheet 1.4-1
It is of great importance that the content should be Jump-start
Answer Self-Check
vehicle
written legibly on ink. Avoid any corrections or erasures and 1.4-1
Do Task Sheet 1.4-1
maintain the cleanliness of this record.
This will be collected by your trainer and submit the
same to the Vocational Instruction Supervisor (VIS) and shall ______________________ ____________________
form part of the permanent trainee’s document on file. Trainee’s Signature Trainer’s Signature

THANK YOU.
UNIT OF COMPETENCY: Service Ignition System UNIT OF COMPETENCY: Test and Repair Wiring/Lighting
NC Level II System
NC Level II
Date
Learning Instructors
Task/Activity Required Accomplishe Date
Outcome Remarks Instructors
d Learning Task/Activity Required Accomplishe
Outcome Remarks
Check/Test Read Information Sheet d
Ignition 2.1-1 Read Information Sheet
System Answer Self-Check 2.1-1 3.1-1
Test electrical
Components Do Task Sheet 2.1-1 Answer Self-Check 3.1-1
systems
Read Information Sheet Do Task Sheet 3.1-1
Perform spark 2.2-1
test Answer Self-Check 2.2-1 Read Information Sheet
Repair 3.2-1
Do Task Sheet 2.2-1
Electrical Answer Self-Check 3.2-1
Read Information Sheet
Adjust contact Systems Do Task Sheet 3.2-1
2.3-1
point
Answer Self-Check 2.3-1
clearance
Do Task Sheet 2.3-1
Perform Read Information Sheet
ignition wiring 2.4-1
installation Answer Self-Check 2.4-1 ______________________ ____________________
Do Task Sheet 2.4-1 Trainee’s Signature Trainer’s Signature
Read Information Sheet
Perform 2.5-1
ignition timing
UNIT OF COMPETENCY: Service Starting System
Answer Self-Check 2.5-1
Do Task Sheet 2.5-1 NC Level II
Repair non- Read Information Sheet
electronic 2.6-1 Date
Learning Instructors
ignition Answer Self-Check 2.6-1 Task/Activity Required Accomplishe
Outcome Remarks
system and/or Do Task Sheet 2.6-1 d
components Test system/ Read Information Sheet
components 4.1-1
and identify Answer Self-Check 4.1-1
______________________ ____________________ faults Do Task Sheet 4.1-1
Trainee’s Signature Trainer’s Signature Repair starting Read Information Sheet
systems 4.2-1
associated Answer Self-Check 4.2-1
components Do Task Sheet 4.2-1
 ______________________ ____________________ Answer Self-Check 6.3-1
Trainee’s Signature Trainer’s Signature Do Task Sheet 6.3-1
Read Information Sheet
Service diesel 6.4-1
fuel injector Answer Self-Check 6.4-1
UNIT OF COMPETENCY: Service Charging System Do Task Sheet 6.4-1
NC Level II

Date
Learning Task/Activity Required Accomplishe
Instructors ______________________ ____________________
Outcome Remarks Trainee’s Signature Trainer’s Signature
d
Test system/ Read Information Sheet
UNIT OF COMPETENCY: Service Clutch System
components 5.1-1
Answer Self-Check 5.1-1 NC Level II
and identify
Do Task Sheet 5.1-1
faults Date
Repair Read Information Sheet Learning Instructors
Task/Activity Required Accomplishe
charging 5.2-1 Outcome Remarks
d
system Answer Self-Check 5.2-1
associated Do Task Sheet 5.2-1 Read Information Sheet
components 7.1-1
Diagnose Answer Self-Check 7.1-1
clutch Read Information Sheet
failure/problem 7.1-2
______________________ ____________________ Answer Self-Check 7.1-2
Trainee’s Signature Trainer’s Signature Do Task Sheet 7.1-1
Read Information Sheet
UNIT OF COMPETENCY: Service Engine Mechanical System 7.2-1
Answer Self-Check 7.2-1
NC Level II
Read Information Sheet
7.2-2
Date Answer Self-Check 7.2
Learning Instructors
Task/Activity Required Accomplishe Pull-out and Read Information Sheet
Outcome Remarks
d mount clutch 7.2-3
Service Read Information Sheet Component Answer Self-Check 7.2-3
6.1-1 parts Read Information Sheet
cooling
Answer Self-Check 6.1-1 7.1-4
system Answer Self-Check 7.1-4
Do Task Sheet 6.1-1
Read Information Sheet Read Information Sheet
Service 7.2-5
6.2-1
lubricating Answer Self-Check 7.2-5
Answer Self-Check 6.2-1
system Do Task Sheet 7.2-1
Do Task Sheet 6.2-1
Service fuel Read Information Sheet Overhaul Read Information Sheet
system 6.3-1 hydraulic 7.3-1
clutch Answer Self-Check 7.3-1 Read Information Sheet
Overhaul
mechanism Do Task Sheet 7.3-1 8.5-1
rear/front
Read Information Sheet Answer Self-Check 8.5-1
Perform clutch wheel hub
7.4-1 Do Task Sheet 8.5-1
parts failure
Answer Self-Check 7.4-1 Read Information Sheet
analysis
Do Task Sheet 7.4-1 Analyze king 8.6-1
Read Information Sheet pin condition Answer Self-Check 8.6-1
Set/Adjust
7.5-1 Do Task Sheet 8.6-1
clutch system
Answer Self-Check 7.5-1 Read Information Sheet
components
Do Task Sheet 7.5-1 Inspect/ 8.7-1
Read Information Sheet replace I-beam Answer Self-Check 8.71
Bleed clutch
7.6-1 Do Task Sheet 8.7-1
hydraulic
Answer Self-Check 7.6-1
system
Do Task Sheet 7.6-1
______________________ ____________________
Trainee’s Signature Trainer’s Signature
______________________ ____________________
Trainee’s Signature Trainer’s Signature UNIT OF COMPETENCY: Service Steering System
NC Level II
UNIT OF COMPETENCY: Service Differential and Front Axle Date
Learning Instructors
NC Level II Task/Activity Required Accomplishe
Remarks
Outcome d
Date Read Information Sheet
Learning Instructors Analyze front
Task/Activity Required Accomplishe 9.1-1
Outcome Remarks end geometry
d Answer Self-Check 9-1
failure
Read Information Sheet Do Task Sheet 9.1-1
Inspect drive 8.1-1 Read Information Sheet
Service
shaft and joint Answer Self-Check 81-1 9.2-1
steering
Do Task Sheet 8.1-1 Answer Self-Check 9.2-1
system
Read Information Sheet Do Task Sheet 9.2-1
Dismount Read Information Sheet
8.2-1
differential Perform wheel 9.3-1
Answer Self-Check 8.2-1
assembly balancing Answer Self-Check 9.3-1
Do Task Sheet 8.2-1
Read Information Sheet Do Task Sheet 9.3-1
Overhaul 8.3-1 Read Information Sheet
differential Answer Self-Check 8.3-1 Conduct wheel 9.4-1
Do Task Sheet 8.3-1 alignment Answer Self-Check 9.4-1
Read Information Sheet Do Task Sheet 9.4-1
Mounting
8.4-1
differential
Answer Self-Check 8.4-1
assembly
Do Task Sheet 8.4-1 ______________________ ____________________
 Trainee’s Signature Trainer’s Signature Do Task Sheet 11.1-1
Dismount/mount Read Information
suspension Sheet 11.2-1
Answer Self-Check
components
11-1
parts Do Task Sheet 11.2-1
Disassemble/ Read Information
Assemble Sheet 11-1
UNIT OF COMPETENCY: Service Brake System Answer Self-Check
suspension
11.3-1
NC Level II parts Do Task Sheet 11.3-1
Learning Date Instructors Read Information
Task/Activity Required Inspect/replace
Outcome Accomplished Remarks Sheet 11.4-1
suspension
Pull-out/ Read Information Sheet Answer Self-Check
component
mount brake 10.1-1 11.4-1
parts
system Answer Self-Check 10-1 Do Task Sheet 11.4-1
components Do Task Sheet 10.1-1
Read Information Sheet
Disassemble/
10.2-1 ______________________ ____________________
assemble
Answer Self-Check 10.2-
brake system
1
Trainee’s Signature Trainer’s Signature
components
Do Task Sheet 10.2-1
Read Information Sheet UNIT OF COMPETENCY: Perform Prev. Under chassis
10.3-1 Maintenance
Conduct road
test
Answer Self-Check 10.3- NC Level II
1
Do Task Sheet 10.3-1
Date
Learning Instructors
Task/Activity Required Accomplishe
Outcome Remarks
d
______________________ ____________________
Read Information Sheet
Trainee’s Signature Trainer’s Signature 12.1-1
Check clutch
Answer Self-Check 12.1-
UNIT OF COMPETENCY: Service Suspension System fluid and lines
1
NC Level II Do Task Sheet 12.1-1
Read Information Sheet
12.2-1
Learning Task/Activity Date Instructors Inspect brake
Answer Self-Check 12.2-
Outcome Required Accomplished Remarks system
1
Diagnose Read Information Do Task Sheet 12.2-1
suspension Sheet 11.1-1 Inspect/change Read Information Sheet
system failure Answer Self-Check transmission/ 12.3-1
11.1-1 differential Answer Self-Check 12.3-
 1 Read Information Sheet
gear oil Diagnose
Do Task Sheet 12.3-1 13.1-1
manual
Read Information Sheet Answer Self-Check 13.1-
transmission
12.4-1 1
Inspect power failure
Answer Self-Check 12.4- Do Task Sheet 13.1-1
steering fluid
1 Read Information Sheet
Do Task Sheet 12.4-1 Pull-out 13.2-1
Read Information Sheet manual Answer Self-Check 13.2-
Check
12.5-1 transmission 1
automatic
Answer Self-Check 12.5- Do Task Sheet 13.2-1
transmission
1 Read Information Sheet
fluid
Do Task Sheet 12.5-1 Disassemble 13.3-1
Read Information Sheet manual Answer Self-Check 13.3-
12.6-1 transmission 1
Inspect/Bleed
Answer Self-Check 12.6- Do Task Sheet 13.3-1
air tank
1 Read Information Sheet
Inspect
Do Task Sheet 12.6-1 13.4-1
manual
Read Information Sheet Answer Self-Check 13.4-
transmission
12.7-1 1
Check tires and parts
Answer Self-Check Do Task Sheet 13.4-1
tire pressures
12.71 Read Information Sheet
Do Task Sheet 12.7-1 Assemble 13.5-1
manual Answer Self-Check 13.5-
transmission 1
Do Task Sheet 13.5-1
______________________ ____________________ Read Information Sheet
Trainee’s Signature Trainer’s Signature 13.6-1
Test manual
Answer Self-Check 13.6-
transmission
UNIT OF COMPETENCY: Overhaul Manual Transmission 1
NC Level II Do Task Sheet 13.6-1

Date
Learning Instructors
Task/Activity Required Accomplishe ______________________ ____________________
Outcome Remarks
d
Trainee’s Signature Trainer’s Signature