Scribd
Upload
23 views2 pages

MFP TB 1447

This technical bulletin provides instructions and cautions for upgrading the firmware of MFP models MX-5070N and MX-6070N. It highlights the importance of turning off the main power before the upgrade to avoid potential issues, such as a non-starting MFP. Additionally, it includes details on the ROM version combination history and specific error corrections related to power save mode for certain regions.

Uploaded by

Nadeesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views2 pages

MFP TB 1447

This technical bulletin provides instructions and cautions for upgrading the firmware of MFP models MX-5070N and MX-6070N. It highlights the importance of turning off the main power before the upgrade to avoid potential issues, such as a non-starting MFP. Additionally, it includes details on the ROM version combination history and specific error corrections related to power save mode for certain regions.

Uploaded by

Nadeesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MFP

TECHNICAL
BULLETIN
MFP-TB-1447

Models: MX-5070N/ MX-6070N

Priority: Medium

Date: September 2016

Subject: ROM Upgrade … (4)

Description: Caution for Firmware upgrade: Make sure to turn OFF the main power
once. Then turn ON the power and upgrade the Firmware.
– If the Firmware update procedure is executed while MFP is still
operating, the Operation Panel becomes black after the Firmware
upgrade and the MFP may not start up, in some rare instances.
– If upgrading from a version older than 04.00.Z1.00, you won’t be
able to restore original version.
– If Google Drive™ is used with a version older than 04.00.Z1.00, it
will have to be enabled the after Firmware upgrade.
• In that case, go into System Settings > Cloud Connect
Settings and enable "Google Drive" for use.
– Do not install this version to 30 and 40 ppm models.
Upgrade of PCU ROM

From Mid-August 2016


ROM
BUNDLE ICU ASIC PCU SCU SPF E-Manual
Control No.
0401Z100_
D01 0400Z100 0400Z100 0401Z100 0300Z100 0300Z100 0220Z100
16080400
Change Details:
Correction of H4-02 error which occurred after recovery from Power Save Mode by activating the Motion Sensor
* This error will not occur while either "Low Power" or "Fast Wake Up" is set for Sleep Mode.
*The H4-02 error will occurs only if the destination is set to EUROPE/ U.K. / CHINA/ AB with the power source of 230V.

(continued)

Page 1 of 2
MFP-TB-1447

ROM Version Combination History Table


ROM
No. Destination Control Model BUNDLE ICU ASIC PCU SCU SPF FAX E-Manual Action T/R No
No.
MX-3050N
MX-3550N
0400K100_
MX-4050N 0400K100 0400Z100 0400Z100 0300Z100 - - 0220K100
16061400
MX-5050N
MX-6050N
MX-3060N
(3) D00 MX-3560N 2016/6 CCE-1605
MX-4060N
MX-3070N 0400Z100_
ALL 0400Z100 0400Z100 0400Z100 0300Z100 0300Z100 - 0220Z100
MX-3570N 16061400
MX-4070N
MX-5070N
MX-6070N
MX-3060N
MX-3560N
0201Z100_
MX-4060N 0201Z100 0201Z100 0200Z100 0200Z100 0100Z10a - 0150Z100
16011400
B01 MX-3070N
MX-3570N
2016/2
(2) North CCE-1515
Mid
America MX-3050N
0201K100_
Except for MX-3550N 0201K100 0200Z100 0200Z100 0200Z100 - 0100Z100 0130K100
16011400
North A01 MX-4050N
America

Technical Report No.: CCE-1634R2

Page 2 of 2

You might also like