string protect checking disable.

; FHOS | System back to OS after flash BIOS completely.

; FHST | System directly shutdown after flash BIOS completely.
; FHRST | System directly reboot after flash BIOS completely.
; CPVER:[Num] | Common Flash Version information
; | ex: [Num] is decimal and start from 1.
; -------------+----------------------------------------------
;(dwsDWS)
;ErrorMsg00 default : empty.
; String : The message of no error.
;(dwsDWS)
;ErrorMsg01 default : empty.
; String : AC error message.
;(dwsDWS)
;ErrorMsg02 default : empty.
; String : DC error message.
;(dwsDWS)
;ErrorMsg03 default : empty.
; String : DC gas gauge under xx% message.
;(dwsDWS)
;ErrorMsg04 default : empty.
; String : BIOS version error message.
;(dwsDWS)
;ErrorMsg05 default : empty.
; String : Model name error message.
;(dwsDWS)
;ErrorMsg10 default : empty.
; String : No support this version of Flash Common Interface
message.
;The number of ErrorMsg## is in hex.

; Supports on DOS flash.

[PermitFlashConditionalData]
PFCDFunctionEnable=0
Conditionalcount=3
Conditionaldata1=1,w,"0x0003","The BIOS image does not support the current hardware
configuration.\nFlash update is aborted."
Conditionaldata2=2,w,"0x20DD","The BIOS image does not support the current hardware
configuration.\nFlash update is aborted."
Conditionaldata3=2,w,"0x20DE","The BIOS image does not support the current hardware
configuration.\nFlash update is aborted."
;(d)
;PFCDFunctionEnable
; default : 0.
; 0 : Function is disabled.
; 1 : Function is enabled.
; The function is enabled or disabled by the flag. If the flag is disabled,
application will keep flash progress without conditional check.
;(d)
;Conditionalcount default : 0.
; Integer : Total count of conditional data.
;Conditionaldata#=[Data Type], [Data Format], [Data Field], [Message String]
; Base on data format you need and to add configure value by below data format
field and data field.
;(d) Conditionaldata# : # support from 1~20.
;(d) [Data Type] : The type of Conditionaldata, when you have more than
one conditional data need to check before flash, you can give them different type.
; It will allow flash when all types are pass.
; It also can use the same type with more than one
conditional data, which means if one of the conditional data is pass, this type is
pass.
; Ex: We have the following settings, Conditionaldata1
is type 0, and others are type 1.
; Conditionalcount=3
; Conditionaldata1=0,w,"0x1234","This BIOS is not
allow to flash."
; Conditionaldata2=1,w,"0x1111","This BIOS is not
allow to flash."
; Conditionaldata3=1,w,"0x1222","This BIOS is not
allow to flash."
; When Conditionaldata1 is pass and Conditionaldata2
or Conditionaldata 3 is pass that will allow flash.
; Allow = data1 pass && (data2 pass || data3 pass).
;(d) [Data Format] : Can support different as binary, string, WORD, DWORD.
; b : The data format is binary.
; s : The data format is string.
; w : The data format is WORD.
; d : The data format is DWORD.
;(d) [Data Field] : Relative data base on data format.
; BINARY : If the data format is binary.
; Data field is HEX. The data is as like "AA BB 00 12
55".
; String : If the data format is string.
; Data field is string. The data is as like
"Data.123.AABE.".
; WORD : If the data format is WORD.
; Data field is HEX and unit is a WORD length. The data
is as like "0x1223".
; DWORD : If the data format is DWORD.
; Data field is HEX and unit is a DWORD length. The data
is as like "0x12345678".
;(d) [Message string] : Define customize message string here.
; The message is pop up when flash utility get a process
interrupted from BIOS.
; The message string is optional field.
; It will not pop any message if you do not provide
message string in this field.

; Supports on DOS WIN SHELL flash.

[MULTI_FD]
Flag=0
FD#01=ID,GDP53,GDP53.fd
FD#01=ID,GDL56,GDL56.fd
FD#03=MPCIIO,2,PCI-0-1F-0-00-FFFFFFFF-3B0B8086,IO-538-0100-0000,BIOS.fd,ME.fd
FD#04=ID,ModelName,BIOS.fd
FD#05=OS,32,32bios.bin,,32.ini
FD#06=OS,64,64bios.bin,me.bin,64.ini
FD#07=MEMORY,FF679000,FFFFFFFF,A2346578,BIOS.fd,ME.bin,config.ini
FD#08=CPUID,FFFFFFFF,000406E3,BIOS.fd,ME.bin,config.ini
;(dwsDWS)
;Flag default : 0.
; 0 : Normal mode.
; 1 : Multi-FD mode. It will reference FD#XX values.
;(dwsDWS)
;FD#XX Integer : XX is decimal number from 01 to 99. (FD#01 ~ FD#99)
;This section supports IO space type, PCI address type and multiple condition type.
;FD#XX=IO,[Offset],[Mask],[Value],[BIOS Filename],[ME Filename],[INI Filename]
;FD#XX=PCI,[Bus],[Device],[Function],[Offset],[Mask],[Value],[BIOS Filename],[ME
Filename],[INI Filename]
;FD#XX=MPCIIO,[Condition Number],PCI-[Bus]-[Device]-[Function]-[Offset]-[Mask]-
[Value],IO-[Offset]-[Mask]-[Value],[BIOS Filename],[ME Filename],[INI Filename]
;FD#XX=ID,[Model Name],[BIOS Filename],[ME Filename],[INI Filename]
;FD#XX=OS,[OS Version],[BIOS Filename],[ME Filename],[INI Filename]
;FD#XX=MEMORY,[Physical Address],[Mask],[Value],[BIOS Filename],[ME Filename],[INI
Filename]
;FD#XX=CPUID,[Mask],[Value],[BIOS Filename],[ME Filename],[INI Filename]
;(dsDS) {IO condition}
;(dwsDWS) {PCI condition}
;(dwsDWS) {ID condition}
;(wW) {OS condition}
;(dwsDWS) {MEMORY condition}
;(wW) {CPUID condition}
;(dwsDWS) [Offset] : Offset in hex.
;(dwsDWS) [Mask] : IO and MEMORY type supports BYTE, WORD and DWORD in
hex.
; For example, BYTE -> 03, WORD -> 0A01, DWORD
100400D3
; PCI and CPUID type supports DWORD in hex only.
;(dwsDWS) [Value] : IO and MEMORY type supports BYTE, WORD and DWORD in
hex.
; PCI type supports DWORD in hex only.
;(dwsDWS) [Model Name] : The platform ID, model name string.
;(wW) [OS Version] : 32bit or 64bit OS. 32 for 32bit OS, 64 for 64bit OS.
;(dws) [Physical Address] : A DWORD value in hex. Value range 0xFE000000 ~
0xFFFFFFFF.
;(dwsDWS) [BIOS Filename] : BIOS filename.
;(w) [ME Filename] : ME filename. If it exists, utility will run OEMME
flash feature.
;(dw) [INI Filename] : INI filename for overwrite.
; If it exists, utility will load the new ini file and
overwrite all sections (except [MULTI_FD]) exist in new ini file.
;When [Offset] & [Mask] == [Value], it will flash the following files ([BIOS
Filename] and [ME Filename]).

; Supports on WIN flash.

[Version]
Version=
;H2OFFT (FlashFirmware Tool) will append the version string at title bar.
;(wW)
;Version default : empty.
; String : Version number string for display.
; It will be show on UI, and append on current version
number.
; When current version is 5.01 and this version string
set to "12", then it will show "H2OFFT V5.01.12" on main dialog caption.

; Supports on WIN DOS SHELL flash.

[UI]
Confirm=1
Silent=0
SilentWithDialog=2
DisplayID=0
InsydeInfo=1
VersionInfo=1
GroupInfo=1
ConfirmInfo=0
ConfirmInfoRDate=0
OnFlashingBeep=0
OnFlashingBeepDelayTime=800
DisableMouseAndKeyboardInput=1
BeforeRunToolDelayTime=0
ProgramStartToWrongMessageBox=0
GetFDFileButton=0
DelayBeforeFlash=0
ConfirmDialogCustomizeMessage=
ShowCustomizeMessageOnConfirmDialogOnly=0
ShowUpdateROMAddress=1
Elapse=0
DisableAccessRightWarningMessage=0
DisableAccessRightCheck=0
PassUpdateProgressToBios=0
ShowEcUpdateProgress=1
ExtEcUpdateErrorMessage=""
NotShowIconOnMessageBox=0
PauseWhenUpdateBinaryWithoutBiosFail=0
;(wW)
;Confirm default : 1.
; 0 : Don't display confirm dialog.
; 1 : Display confirm dialog.
;(wW)
;Silent default : 0.
; 0 : Normal mode.
; 1 : Silent mode, hide main dialog.
;(wW)
;SilentWithDialog default : 2.
; 0 : Don't display any dialog.
; 1 : Display main dialog only.
; 2 : Display all dialogs except main dialog.
;(wW)
;DisplayID default : 1.
; 0 : Don't display BIOS ID.
; 1 : Display BIOS ID.
;(wW)
;InsydeInfo default : 1.
; 0 : Don't display Insyde copyright information and URL.
; 1 : Display Insyde copyright information and URL.
;(wW)
;VersionInfo default : 1.
; 0 : Don't display BIOS version.
; 1 : Display BIOS version.
;(wW)
;GroupInfo default : 1.
; 0 : Don't display group box.
; 1 : Display group box.
;(wW)
;ConfirmInfo default : 0.
; 0 : Don't display BIOS version and build date information
in confirm dialog.
; 1 : Display BIOS version and build date information in
confirm dialog.
;(wW)
;ConfirmInfoRDate default : 0.
; 0 : Don't display BIOS version and release date
information in confirm dialog.
; 1 : Display BIOS version and release date information in
confirm dialog.
; When this flag set to 1, the ConfirmInfo flag won't be
referenced.
;(w)
;OnFlashingBeep default : 0.
; 0 : Don't beep on flashing.
; 1 : Beep on flashing.
;(w)
;OnFlashingBeepDelayTime
; default : 800. (Unit is millisecond)
; Integer : Set beep delay time (milliseconds).
;(wW)
;DisableMouseAndKeyboardInput
; default : 0.
; 0 : Don't hook mouse and keyboard.
; 1 : Hook mouse and keyboard without "CTRL+ALT+DEL".
;(wW)
;BeforeRunToolDelayTime
; default : 0. (Unit is second)
; Integer : Delay number of seconds before flash process.
;(wW)
;ProgramStartToWrongMessageBox
; default : 0.
; 0 : Don't pop-up warning dialog before flash process.
; 1 : Pop-up a warning dialog before flash process.
;(wW)
;GetFDFileButton default : 0.
; 0 : Hide FD file browse button.
; 1 : Show the button for browsing FD file.
;(wW)
;DelayBeforeFlash default : 0. (Unit is second)
; Integer : Delay number of seconds before flashing.
;(wW)
;ConfirmDialogCustomizeMessage
; default : empty.
; String : A key name which list in [MessageStringTable].
; For inserting additional notification message in
confirm dialog.
;(wW)
;ShowCustomizeMessageOnConfirmDialogOnly
; default : 0
; 0 : Display default confirm message and insert the
customize message on confirm dialog.
; 1 : Do not display default confirm message, only show
customize message on confirm dialog.
;(d)
;ShowUpdateROMAddress
; default : 0
; 0 : Show progress bar when updating BIOS.
; 1 : Show ROM address when updating BIOS.
;(dwsDWS)
;Elapse default : 0
; 0 : Disable to show elapse time during progressing BIOS
update.
; 1 : Enable to show elapse time during progressing BIOS
update.
;(wW)
;DisableAccessRightWarningMessage
; default : 0
; 0 : It will show warning message when any region is locked
(such as ME) in input image.
; 1 : Do not show warning message when any region is locked
in input image.
;(wW)
;DisableAccessRightCheck
; default : 0
; 0 : It will check access right when any one region flag of
[Region] section is set.
; 1 : It will not do access right check.
;(DWS)
;PassUpdateProgressToBios
; default : 0
; 0 : Do not pass update progress to BIOS.
; 1 : It will pass update progress to BIOS during flash.
;(DWS)
;ShowEcUpdateProgress
; default : 1
; 0 : Hide the EC update progress during EC updating.
; 1 : Show the EC update progress during EC updating.
;(WS)
;ExtEcUpdateErrorMessage
; default : Empty
; String : The error to display when extern EC update failed.
;(WS)
;ExtEcUpdateErrorMessage###
; default : Empty
; String : The error to display when extern EC update failed.
; ### is the return code (from IHISI) in Hex. Value
range from 1 ~ FFFFFFFF.
; When the return code is 0x00000005 the
ExtEcUpdateErrorMessage5 will be used.
; When the return code is 0x00100002 the
ExtEcUpdateErrorMessage100002 will be used.
;(wW)
;NotShowIconOnMessageBox
; default : 0
; 0 : Show question, information, warning, error icon on
message box.
; 1 : Not show icon, only message string on message box.
;(DWS)
;PauseWhenUpdateBinaryWithoutBiosFail
; default : 0
; Update binary without BIOS means only update EC,
native ME, ISH, PDT, IOM, MGPHY, TBT, Retimer but no BIOS binary.
; 0 : Not pause when it failed on updating binary without
BIOS case.
; This seeting need to use in Windows capsule update to
prevent user confused.
; Because in Windows capsule update the message will not
be displaied.
; 1 : Pause to let user see the error.

; Supports on WIN flash.

[Option]
Flag=0
;(wW)
;Flag default : 0.
; 0 : Auto flash mode.
; 1 : User option mode, including start, exit buttons.
; 2 : User flash mode, including start, exit buttons.

; Supports on WIN flash.

[FDFile]
FileName=
;(wW)
;FileName default : empty.
; String : Utility always load this file.
; If the FileName is empty, utility will search current
directory
; and load the first found FD file.

; Supports on DOS WIN SHELL flash.

[AC_Adapter]
Flag=1
BatteryCheck=1
BatteryBound=10
LauncherAcWarning=messagestringA02
SecurityAcWarning=messagestringA02
AcNotConnectError=messagestringA05
DcNotConnectError=messagestringA06
DcNotEnoughError=messagestringA07
;(dwsDWS)
;Flag default : 1.
; 0 : Don't check AC power and battery life percentage.
; Skip power check and continue flash.
; 1 : Check AC power not check battery life percentage.
; Only AC power meets the requirement can continue
flash.
; 2 : Check battery life percentage not check AC power.
; Only DC power meets the requirement can continue
flash.
; 3 : Check AC power and battery life percentage.
; Both AC and DC power meet the requirement can continue
flash.
; 4 : Check AC power or battery life percentage.
; One of AC or DC power meets the requirement can
continue flash.
;(dwsDWS)
;BatteryCheck default : 0. This setting will not be referenced when the value
of flag >= 2.
; 0 : Don't check battery life percentage
; 1 : Check battery life percentage
;(dwsDWS)
;BatteryBound default : 20.
; Integer (1~100) : Low battery boundary (percentage).
; When BatteryCheck=1 this value will be referenced.
; And only when the battery life percentage is bigger
than inputted value, it can do flash.
;(dsDS)
;LauncherAcWarning default : messagestringA02
; String : A key name which list in [MessageStringTable].
;(dwsDWS)
;SecurityAcWarning default : messagestringA02
; String : A key name which list in [MessageStringTable].
;(wW)
;AcNotConnectError default : messagestringA05
; String : A key name which list in [MessageStringTable].
;(wW)
;DcNotConnectError default : messagestringA06
; String : A key name which list in [MessageStringTable].
;(wW)
;DcNotEnoughError default : messagestringA07
; String : A key name which list in [MessageStringTable].

; Supports on DOS WIN SHELL flash.

[Platform_Check]
Flag=2
NotTargetPlatformErrorMessage="This BIOS is not for your Notebook PC."
PlatformName1=Dell G15 5515
PlatformName2=
PlatformName3=
PlatformName4=
PlatformName5=
PlatformName6=
PlatformName7=
PlatformName8=
PlatformName9=
PlatformName10=
PlatformName11=
PlatformName12=
PlatformName13=
PlatformName14=
PlatformName15=
PlatformName16=
PlatformName17=
PlatformName18=
PlatformName19=
PlatformName20=
;This flag is the switch of comparing BIOS project ID with ROM file project ID.
;(dwsDWS)
;Flag default : 3.
; 0 : Don't check project ID.
; 1 : Check project ID of new file.
; If ID is different with current BIOS, the utility will
close.
; 2 : Utility will compare current platform ID with the 20
platform IDs.
; If anyone is match, it will go ahead, otherwise
utility will close.
; 3 : Does tool need to do platform check is depend on
onboard BIOS report.
; When BIOS report not to check from IHISI, it is the
same as Flag=0.
; When BIOS report need to check from IHISI, it is the
same as Flag=1.
;(wsWS)
;NotTargetPlatformErrorMessage
; default : "This BIOS is not for your Notebook PC."
; String : User defined error message when input BIOS model name
is not match with platform model name.
;(dwsDWS)
;PlatformName1~20 default : empty.
; String : If ROM file do not contain correct ID, user can define
ID here.

; Supports on DOS WIN SHELL flash.

[PlatformVersion]
Flag=0
Version1=
Version2=
Version3=
Version4=
Version5=
Version6=
Version7=
Version8=
Version9=
Version10=
Version11=
Version12=
Version13=
Version14=
Version15=
Version16=
Version17=
Version18=
Version19=
Version20=
;This section only available when the [Platform_Check] is enable to compare the 20
platform IDs.
;The Version is pair with the PlatformName.
;For example: When the platform ID matches with PlatformName2, the Version2 will be
used.
;(dwsDWS)
;Flag default : 0.
; 0 : Don't use multi version.
; 1 : Use the version in the list instead of the version in
file.
;(dwsDWS)
;Version1~20 default : empty.
; String : If ROM file do not contain correct version, user can
define version here.

; Supports on DOS WIN SHELL flash.

[Bios_Version_Check]
;Block the BIOS can not downgrade to previous BIOS version130
Flag=4
;Block the BIOS can not downgrade to previous BIOS version130
SameVersionErrorMessage="The version of ROM file is the same as that of BIOS."
OlderVersionErrorMessage="The version of ROM file is not newer than that of BIOS."
CheckByBiosErrorMessage="This BIOS file is not allow to flash. The flash process
will be terminated."
;This flag is the switch of checking BIOS version.
;(dwsDWS)
;Flag default : 2.
; 0 : Don't check BIOS version.
; 1 : Check BIOS version by tool.
; When BIOS version in file is older than onboard BIOS,
it will display a warning message and close application.
; Does same version allow to flash depend on BIOS report
(from IHISI).
; 2 : Does tool need to do version check is depend on
onboard BIOS report (from IHISI).
; When BIOS report not to check from IHISI, it is the
same as Flag=0.
; When BIOS report need to check from IHISI, it is the
same as Flag=1.
; 3 : Check BIOS version by BIOS only. (Application will not
do version check.)
; 4 : Check BIOS version by BIOS and application. After it
pass version check by BIOS, it will do version check by application.
; Only pass both BIOS and application check allow to
flash.
;(wsWS)
;SameVersionErrorMessage
; default : "The version of ROM file is the same as that of BIOS."
; String : User defined error message when input BIOS version is
the same as platform BIOS version.
;(wsWS)
;OlderVersionErrorMessage
; default : "The version of ROM file is not newer than that of
BIOS."
; String : User defined error message when input BIOS version is
older than platform BIOS version.
;(dwsDWS)
;CheckByBiosErrorMessage
; default : "This BIOS file is not allow to flash. The flash
process will be terminated."
; String : User defined error message when BIOS is not allow to
flash this version image.

; Supports on DOS WIN SHELL flash.

[BIOSVersionFormat]
BIOSVFEnable=0
VersionFormat=TXXXXXXX.N.NN.NN
;This BIOSVFEnable flag is the switch of BIOSVersionFormat.
;(dwsDWS)
;BIOSVFEnable default : 0
; 0 : Function is disabled.
; 1 : Function is enabled.
;(dwsDWS)
;VersionFormat X : The field is masked. It will NOT be compared.
; N : The digit field can be ASCII, case-sensitive.
; T : It's the same definition with N. But T is a case-
insensitive.
; . : Dot is also a mask. It will NOT be compared.
; D : Don't care field. It will NOT be compared.
; This field can be empty.
; It only allow to put at start or end of the version
format.
; For example: Onboard version 1.21B flash to 1.22,
VersionFormat must be N.NND
; N.NND means the valid format is N.NN and
N.NNX, the 5th character will be ignore in version compare.

; Supports on WIN flash.

[PermitFlashVersion]
PFVFunctionEnable=0
SingleVersion=
MultiVersion1=
MultiVersion2=
MultiVersion3=
MultiVersion4=
MultiVersion5=
MultiVersion6=
MultiVersion7=
MultiVersion8=
MultiVersion9=
MultiVersion10=
MultiVersion11=
MultiVersion12=
MultiVersion13=
MultiVersion14=
MultiVersion15=
MultiVersion16=
MultiVersion17=
MultiVersion18=
MultiVersion19=
MultiVersion20=
;This section is for conditional version definition for BIOS update.
;When this function enabled, flash utility will compare on board BIOS version with
conditional version and then decide to continue flash progress or not.
;For example: In following condition PFVFunctionEnable=1, SingleVersion=A03,
"Please update to BIOS version A03 first!".
; When on board BIOS version is older than A03,
; it will pop up the error dialog with the message "Please update to
BIOS version A03 first!" and then terminated.
; Otherwise it will continue original flash process.
;The MultiVersion1~20 are similar as SingleVersion, but they only available when
the [Platform_Check] is enable to compare the 20 platform IDs.
;They must be pair of the PlatformName of [Platform_Check] section.
;For example: When the platform ID matches with PlatformName2, the Version2 will be
used.
;(wW)
;PFVFunctionEnable default : 0.
; 0 : Disable conditional version check.
; 1 : Enable conditional version check.
;(wW)
;SingleVersion default : empty.
; String : XXXX, "Message String"
; XXXX is the conditional version, regarding version
check rule please refer section "BIOSVersionFormat".
; "Message String" is the message to show when the on
board BIOS version is older than the conditional version.
;(wW)
;MultiVersion1~20 default : empty.
; String : XXXX, "Message String"
; XXXX is the conditional version, regarding version
check rule please refer section "BIOSVersionFormat".
; "Message String" is the message to show when the on
board BIOS version is older than the conditional version.
;
; The section is depended on other sections if using [PermitFlashVersion].
; a. If single version is enabled,
; Please also configure section [Bios_Version_Check] for version
check
; b. If multi-version is enabled,
; Please also configure following sections [Bios_Version_Check]
for version check,
; section [Platform_Check] for platform name check and section
[PlatformVersion] for multi-platform version check

; Supports on DOS WIN SHELL Secure flash.

[FlashComplete]
Action=2
Dialog=0
Counter=15
ActionOverride=0
Pause=0
PauseWarning=messagestringA03
;(dwsDWS)
;Action default : 2.
; 0 : Do nothing. Return to OS.
; 1 : Shutdown.
; 2 : Reboot.
;(w)
;Dialog default : 0.
; 0 : Don't display dialog.
; 1 : Display dialog.
; 2 : Display dialog and wait several seconds.
;(w)
;Counter default : 15. (Unit is second)
; Integer : The number of seconds for countdown to reboot or
shutdown.
;(w)
;ActionOverride default : 0
; 0 : This key is disabled. Flash utility bases action key
setting to do original behavior.
; 1 : This key is enabled. Flash utility just does close
itself in silent mode.
;(dwsDWS)
;Pause default : 0.
; 0 : Not pause after flash complete.
; 1 : Pause after flash complete.
;(dwsDWS)
;PauseWarning default : messagestringA03
; String : A key name which list in [MessageStringTable].
;The value behind comma is the return value in silent mode.

; Supports on DOS WIN SHELL flash.

[FlashSecureBIOSOverride]
EnableFlashSecureBIOSOverride=0
Action=1,1
;(DWS)
;EnableFlashSecureBIOSOverride
; default : 0.
; 0 : Disable action override. Use the action which returned
from BIOS.
; 1 : Enable the action override when flashing secure BIOS
in OS.
;(DWS)
;Action default : 1.
; 0 : S3.
; 1 : Reboot.
; 2 : Shutdown.
; 3 : Do nothing.
;The value behind comma is the return value in silent mode.

; Supports on DOS WIN SHELL Secure flash.

[ForceFlash]
ALL=1
BB_PEI=0
CPU_Microcode=0
Variable=0
DXE=0
EC=0
Password=0
OEM_NVS=0
Logo=1
Type#09=0
Type#08=0
UseBvdtRomMap=0
;These areas are reported by IHISI from BIOS for protection.
;When you set the value to 1, the selected protect area will be force flash.
;(dwsDWS)
;ALL default : 0.
; 0 : Reserve all protected areas.
; 1 : Flash all protected areas.
;(dwsDWS)
;BB_PEI, CPU_Microcode, Variable, DXE, EC, Password, OEM_NVS, Logo
; They are the predefined types each one indicate a type
value.
; BB_PEI = Type#00
; CPU_Microcode = Type#01
; Variable = Type#02
; DXE = Type#03
; EC = Type#04
; Password = Type#0F
; OEM_NVS = Type#10
; Logo = Type#05
; default : 0.
; 0 : Protect this area.
; 1 : Force flash this area.
;(dwsDWS)
;Type#NN Type#NN is an extended method for those didn't have
predefine type.
; The NN is a number in Hex.
; For example:
; If BIOS report to protect type 13h from IHISI, and you
want to flash this protect area.
; Then the setting in platform.ini can add Type#13=1.
; default : 0.
; 0 : Protect this area.
; 1 : Force flash this area.
;(DWS)
;UseBvdtRomMap default : 0.
; 0 : Disable private/protection ROM map override feature.
; AP will reference IHISI report to protect regions.
; 1 : Enable private/protection ROM map override feature.
; AP will reference BVDT defined map to protect regions.

; Supports on DOS WIN SHELL Secure flash.

[Region]
BIOS=0
GbE=0
ME=0
EC=0
DESC=0
Platform_Data=0
;This section is used to control SPI descriptor mode.
;Default is flash all regions when the values all set to 0.
;If any one of the regions set to 1, it will only flash specific regions.
;If the BIOS is built without additional Intel firmware as like ME, GBE and
Descriptor
; or BIOS is an AMD firmware which does not support ME, please ignore this section.
;(dwsDWS)
;BIOS default : 0.
; 0 : Don't flash.
; 1 : Flash BIOS region.
;(dwsDWS)
;GbE default : 0.
; 0 : Don't flash.
; 1 : Flash GbE region.
;(dwsDWS)
;ME default : 0.
; 0 : Don't flash.
; 1 : Flash ME region.
;(dwsDWS)
;EC default : 0.
; 0 : Don't flash.
; 1 : Flash EC region.
;(dwsDWS)
;DESC default : 0.
; 0 : Don't flash.
; 1 : Flash Descriptor region.
;(dwsDWS)
;Platform_Data default : 0.
; 0 : Don't flash.
; 1 : Flash Platform Data region.

; Supports on WIN SHELL Secure flash.

[UpdateEC]
Flag=1
Ignore_21h=1
EC_Dialog=0
BIOS_Only=0
Progress_Bar=1
EC_Only=0
EC_Path=
EC_Compare=0
EC_Verify=0
EC_VerifyErrorRetry=3
EC_BlockSize=64
EC_DockWarning=messagestringA04
;(w)
;Flag default : 0.
; 0 : Don't flash EC by BIOS.
; 1 : Flash EC by BIOS.
;(w)
;EC_Dialog default : 0.
; 0 : Don't display confirm dialog when begin to update EC.
; 1 : Show confirm dialog.
; This key only valid when Flag=1.
;(w)
;BIOS_Only default : 0.
; 0 : Flash EC and BIOS file.
; 1 : Only flash BIOS part of the EC merged BIOS binary
file.
; This key only valid when Flag=1.
;(w)
;EC_Only default : 0.
; 0 : Flash EC and BIOS file.
; 1 : Only flash EC binary file.
; This key only valid when Flag=1.
;(w)
;EC_Path default : empty.
; String : EC filename.
; This key only valid when Flag=1.
;(wsWDS)
;EC_Compare default : 0.
; 0 : Don't do compare before writing. Just do write action
directly.
; 1 : Read EC and compare difference before writing.
; If the read data is the same as the data we want to
write,
; it will not do the write action.
;(wsWDS)
;EC_Verify default : 0.
; 0 : Don't verify EC.
; 1 : Verify EC after writing.
;(wsWDS)
;EC_VerifyErrorRetry
; default : 3.
; Integer : Retry times.
; If the value is not zero means enable verify retry,
and will retry the setting times.
; 0 for disable verify retry.
;(WDS)
;EC_BlockSize default : 64.
; Integer : The block size of EC update. Unit is KB.
;(dsS)
;EC_DockWarning default : messagestringA04
; String : A key name which list in [MessageStringTable].

; Supports on WIN flash.

[UpdateExtraData]
Flag=0
DataType=1
type1errorcodeA0=messagestring1
;(w)
;Flag default : 0.
; 0 : Do not update extra data.
; 1 : Update extra data by IHISI.
; If new image is NOT processed by IFIT tool, please do
not enable this function.
;(w)
;DataType default : 1.
; Integer : Integer number. The meaning of data type number will
define by BIOS OEM.
; Now will support 1, 4~C.
; Ex:1,4,6,5 -> Mean you want to update 1,4,6,5 Four
type of data.
; Notice: 2, 3 cannot used.
;(w)
;type#errorcode??=messagestringX
; This key is for customizing error message which occur
in update extra data.
; For example:
; When an error occur when updating type 4, BIOS return
the error code A2.
; AP will find the key "type4errorcodeA2" and get the
string ID "messagestring4", and find the string in [MessageStringTable].
; Then shows the message string instead of standard
error message.
; # : The type number define in DataType. (Hex)
; ?? : The error code returned by BIOS. Available value range
A0~AF.
; X : Message string number.
;This feature will let you just input data to update by IHISI. Data type will
define by BIOS OEM.
;If new image is NOT processed by IFIT tool, please do not enable this function.

; Supports on WIN SHELL flash.

[UpdateOEMME]
MEFileName=
MEProgram=
CheckVersion=0
Command=
;(ws)
;MEFileName default : empty.
; String : If this field not empty or Multi-FD ME filename
exists, tool will use Intel firmware update tool to update ME in OS before flash
BIOS.
;(w)
;MEProgram default : empty.
; String : The Intel ME update program name. When this field is
empty, tool will using default program name "FWUpdLcl.exe".
;(w)
;CheckVersion default : 0.
; 0 : Don't check ME file version.
; 1 : Check ME file version.
; 2 : When ME flash error is cause of same version and
downgrade version do not show error and continue to flash.
; 3 : When ME flash error, show error but continue to flash.
;(ws)
;Command default : empty.
; String : When this field is empty and don't want to check ME
version, utility will use "-f %filename -generic -allowsv" as default command.
; The %filename is a keyword which will be replaced with
the value in MEFileName within this section or the filename in MULTI_FD section.
;NOTE:
; The Intel firmware update tool (FWUpdLcl.exe) is dependent on each chipset
generation, and the tool in release flash package is a sample and may be not
suitable for your project.
; Please remember to replace the FWUpdLcl.exe with right version before you will
utilize function to update Intel firmware (ME or TXE).

; Supports on Secure flash.

[UpdateDeviceFirmware]
VerifyErrorRetry=0
;(DWS)
;VerifyErrorRetry default : 0. Don't verify after update.
; Integer : Retry times.
; When this value bigger than 0, means enable verifying
device firmware after writing and it will retry the setting times.
; 0 for disable verify retry.

; Supports on WIN SHELL flash.

[Log_file]
Flag=0
FileName=H2OFFT.log
CMOS_Flag=0
CMOS_INDEX_PORT=70
CMOS_DATA_PORT=71
CMOS_OFFSET=68,69
;(wsWS)
;Flag default : 0.
; 0 : Don't log to file.
; 1 : Utility will log to specify file.
;(wsWS)
;FileName default : H2OFFT.log.
; String : Log filename.
;(wW)
;CMOS_Flag default : 0.
; 0 : Disable CMOS debug.
; 1 : Enable CMOS debug.
;(wW)
;CMOS_INDEX_PORT default : 70. (hex)
; 70 : Use 0x70 port as index port.
; 72 : Use 0x72 port as index port.
;(wW)
;CMOS_DATA_PORT default : 71. (hex)
; 71 : Use 0x71 port as index port.
; 73 : Use 0x73 port as index port.
;(wW)
;CMOS_OFFSET default : 0,0. (hex)
; CMOS_OFFSET=xx,yy the xx is high byte offset; yy is
low byte offset, and the range is 0~FF (hex)

; Supports on WIN flash.

[ReturnErrorCode]
FileNotFound=3,259
ErrorBeforeFlash=4,259
BatteryNotConnect=4,259
BatteryCapacityNotEnough=4,259
WriteROMFail=5,259
WriteECFail=6,259
WriteExtraDataFail=7,259
OemOdmFuncFail=8,259
;(wW)
;FileNotFound default : 3.
; Integer : If utility cannot find the BIOS file, it will return
this error code.
;(wW)
;ErrorBeforeFlash default : 4.
; Integer : If error occur before flash process, it will return
this error code.
;(wW)
;BatteryNotConnect default : 4.
; Integer : If battery not connect, it will return this error
code.
; (This error is separated from ErrorBeforeFlash.)
;(wW)
;BatteryCapacityNotEnough
; default : 4.
; Integer : If battery capacity not enough, it will return this
error code.
; (This error is separated from ErrorBeforeFlash.)
;(wW)
;WriteROMFail default : 5.
; Integer : If error occur during write ROM process, it will
return this error code.
;(wW)
;WriteECFail default : 6.
; Integer : If error occur during write EC process, it will return
this error code.
;(wW)
;WriteExtraDataFail
; default : 7.
; Integer : If error occur during write Extra Data process, it
will return this error code.
;(W)
;OemOdmFuncFail
; default : 8.
; Integer : If error occur when doing OEM/ODM specific function,
it will return this error code.
;The value behind comma is the return value in silent mode.

; Supports on WIN flash.

[ReturnCodeDefinition]
RETURN_SUCCESSFUL=0,3010
RETURN_MODEL_CHECK_FAIL=259,259
RETURN_USER_CONFIRM_CANCEL=1701,259
RETURN_AC_NOT_CONNECT=1702,259
RETURN_LOAD_DRIVER_FAIL=1703,259
RETURN_NEED_REBOOT=3010,3010
RETURN_USER_EXIT=1704,259
RETURN_SAME_VERSION_CHECK=99999,259
;(wW)
;RETURN_SUCCESSFUL default : 0.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;(wW)
;RETURN_MODEL_CHECK_FAIL
; default : 259.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;(wW)
;RETURN_USER_CONFIRM_CANCEL
; default : 1602.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;(wW)
;RETURN_AC_NOT_CONNECT
; default : 1602.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;(wW)
;RETURN_LOAD_DRIVER_FAIL
; default : 259.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;(wW)
;RETURN_NEED_REBOOT
; default : 3010.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;(wW)
;RETURN_USER_EXIT default : 1602.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;(wW)
;RETURN_SAME_VERSION_CHECK
; default : 1602.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;The value behind comma is the return value in silent mode.

; Supports on DOS WIN SHELL Secure flash.

[Others]
DisableCompare=0
DisableVerify=0
VerifyErrorRetry=3
SMIErrorRetryDelay=100
SMIErrorRetry=5
ForceIHISIVersion=
EnablePrivateRegionMovement=0
EnableProtectionRegionMovement=0
DisableSecureCapsuleFlash=0
BootSafeMode=0
;(wsWS)
;DisableCompare default : 0.
; 0 : Read BIOS and compare difference before writing.
; If the read data is the same as the data we want to
write,
; it will not do the write action.
; 1 : Don't do compare before writing. Just do write action
directly.
;(wsWS)
;DisableVerify default : 0.
; 0 : Verify BIOS after writing.
; 1 : Don't verify BIOS after writing.
;(wsWS)
;VerifyErrorRetry default : 3.
; Integer : Retry times.
; If the value is not zero means enable verify retry,
and will retry set times.
; 0 for disable verify retry.
;(wsWS)
;SMIErrorRetryDelay
; default : 100. (Unit is millisecond)
; Integer : Delay time during SMI error retry (millisecond).
;(wsWS)
;SMIErrorRetry default : 5.
; Integer : Retry times when SMI fail. (Note: This may let flash
time become longer.)
;(w)
;ForceIHISIVersion default : empty.
; Version : This flag will force override the IHISI version which
will passing to BIOS.
; Ex: 1.9.1
;(wsDWS)
;EnablePrivateRegionMovement
; default : 0
; 0 : Disable private region movement.
; 1 : Enable private region movement. It will backup orginal
private regions and relocate to new address which defined in new image BVDT when
update whole BIOS.
;(sDWS)
;EnableProtectionRegionMovement
; default : 0
; 0 : Disable protection region movement.
; 1 : Enable protection region movement. It will backup
orginal protection regions and relocate to new address which defined in new image
BVDT when update whole BIOS.
; This flag cannot be used with [ForceFlash] all=1.
;(dwsDWS)
;DisableSecureCapsuleFlash
; default : 0.
; 0 : Enable flash secure BIOS on normal platform.
; 1 : Disable flash secure BIOS on normal platform.
;(wW)
;BootSafeMode format : [Number],[Version String]
; [Number] default : 0.
; 0 : Disable this feature. Normal boot.
; 1 : Enable this feature. Next boot into Windows safe mode.
; [Version String] default : empty.
; The limit version.
; When onboard BIOS version smaller than or equal to
this version, it allow to enable this feature.
; When onboard BIOS version bigger than this version,
this feature always disable even the value is set to 1.

; Supports on WIN flash.

[PasswordCheck]
PasswordCheckEnable=0
MsgCaption=Password confirmation
MsgPreface=Please enter password
MsgSuccess=Password is correct.
MsgFailure=Password is incorrect. Please retry again.
;(wW)
;PasswordCheckEnable
; default : 0.
; 0 : Disable the password check function.
; 1 : Enable the password check function.
;(wW)
;MsgCaption default : "Password confirmation"
; String : The dialog box caption.
;(wW)
;MsgPreface default : "Please enter password"
; String : The preface of password entering.
;(wW)
;MsgSuccess default : "Password is correct."
; String : The string displayed when the comparing result
returned by BIOS is 0x00.
;(wW)
;MsgFailure default : "Password is incorrect. Please retry again."
; String : The string displayed when the comparing result
returned by BIOS is 0x01.

; Supports on DOS WIN Shell flash.

[MessageStringTable]
messagestring1="Warning message 1"
messagestringA00="It only supports to flash secure BIOS on current platform.\r\nThe
image to be updated is not a secure BIOS.\r\n"
messagestringA01="Not allow to flash secure BIOS on current platform.\r\n"
messagestringA02="Please do not remove the AC power!"
messagestringA03="Press any key to continue..."
messagestringA04="Get EC part information fail."
messagestringA05="Insyde H2OFFT cannot run on battery power. Please plug in AC
power and try again."
messagestringA06="Please insert system battery."
messagestringA07="Battery is too low (%d < %d). Please charge your battery to %d%
%."
;(dwsDWS)
;messagestring# default : empty.
;The message string must as following format messagestring#="Your message here."
;The # is a number in Decimal or Hex.
;If a multi line message is required, you can use "\n" in message string for new
line.

; Supports on Secure flash.

[FactoryCopy]
Restore=1
;(DWS)
;Restore default : 0.
; 0 : Don't do FACTORY_COPY restore after flash.
; 1 : Restore FACTORY_COPY after flash BIOS.
;Factory copy is a region in BIOS which is used to store default keys of Secure
Boot.

[SecurityFlashFactoryUpdate]
UpdateFactoryCopy=1
UpdateNvStorage=0
; default : 0.
; 0 : Don't update NV storage area on secure boot support
platform.
; 1 : Force update NV storage area on secure boot support
platform.

[EngineeringErrorDisable]
SkipSecureBootProtectionCheck = 1

; Supports on DOS WIN flash.

[CapsuleAudit]
Flag=0
QAKey=
OemKey=
;(dw)
;Flag default : 0.
; 0 : Disable.
; 1 : Enable capsule update audit.
;(dw)
;QAKey default : empty.
; String : Capsule file which sign with Insyde QA test key.
;(dw)
;OemKey default : empty.
; String : Capsule file which sign with OEM/ODM key.

; Supports on WIN Shell flash.

[SecureUpdate]
viaESP=1
ViaESPCopyFileWaitingTime=0
FreeEspSpaceWhenNeed=1
DeviceOrder=eMMC, NVMe, SATA, ATAPI, USB
PhysicalMemoryAllocateFailRetryTimes=3
PhysicalMemoryAllocateFailRetryDelay=500
;(WS)
;viaESP default : 3.
; 0 : Disable.
; Pass capsule via memory only.
; 1 : Write the capsule to ESP (EFI system partition).
; Pass capsule via ESP only.
; Onboard BIOS need to support via ESP method, if BIOS
not support then the update failed.
; 2 : Pass capsule via ESP and memory.
; It will copy capsule to ESP then pass capsule to BIOS
via memory.
; It success when both steps are success, and failure
when any one failed.
; 3 : Pass capsule via ESP or memory.
; It will try to update capsule via ESP first.
; When via ESP method failed it will use pass capsule to
BIOS via memory.
; When via ESP method success it will return success.
; NOTE: DOS flash does not support via ESP method, if the setting need to run in
DOS please set viaESP as 0 or 3.
;(WS)
;ViaESPCopyFileWaitingTime
; default : 0.
; Integer : The waiting time after ESP file copy, unit is second.
; To prevent file copy success but the file not actually
write to disk, you can use this delay to wait hardware action done.
; The flash utility also has a mechanism to read back
and compare to make sure the data is correct.
;(W)
;FreeEspSpaceWhenNeed
; default : 1.
; 0 : Do not try to delete file in ESP.
; 1 : Try to delete .log file in root folder of ESP.
;(S)
;DeviceOrder default : eMMC, NVMe, SATA, ATAPI, USB
; The FAT device detection sequence of secure flash via
ESP feature.
; Now we support eMMC, NVMe, SATA, ATAPI, USB.
;(W)
;PhysicalMemoryAllocateFailRetryTimes
; default : 3.
; Integer : Retry times.
; If the value is not zero means enable physical memory
allocate fail retry, and will retry the setting times.
; 0 for disable retry.
;(W)
;PhysicalMemoryAllocateFailRetryDelay
; default : 500. (Unit is millisecond)
; Integer : Delay time during secure update physical memory
allocate fail retry (millisecond).

; Supports on WIN Secure flash.

[AutoWakeup]
Flag=0
Interval=120
;(wsWDS)
;Flag default : 0.
; 0 : Disable.
; 1 : Enable auto power on via RTC.
;(wsWDS)
;Interval default : 120.
; Integer : Unit is second. Interval time after system turn off.

; Supports on DOS WIN SHELL Secure flash.

[PassToBios]
ClearTXE=0
;(wdsWDS)
;ClearTXE default : 0.
; 0 : Disable.
; 1 : Tell BIOS to clear TXE at this flash.

; Supports on Secure flash.

[PreFlash]
EraseDataType=
;(WDS)
;EraseDataType default : Empty.
; Hex Value : The address and size of the data type must reported
via IHISI.
; When the data type is not empty, flash utility will
erase (fill with 0xFF) the area of the specific data type before flash.
; Note: In secure BIOS, the NV Storage will be always
protected. If the specific data type is NV Storage, it will not take effect.

; Supports on DOS WIN SHELL Secure flash.

[ParamForBiosReference]
Param1=
Param2=
Param3=
Param4=
Param5=
Param6=
Param7=
Param8=
Param9=
Param10=
; This section used to pass specific parameter string to BIOS via IHISI 19h.
;(dwsDWS)
;Param1~20 default : empty.
; String : The parameter string you want to pass to BIOS.