《RC11 Wireless air mouse manual》
I. Introduction
RC11 is an air mouse which can realize the dual function of the
traditional keyboard and mouse when you waving in the air .You will find
it comfortable and convenient when you control it in your hands. It is
unnecessary to like other traditional keyboard and mouse, which must rely
on the stationary flat desktop to operate. It makes you easy to control
your computer, Television and entertainment when you lying down, or
standing.
Three-in-one function
RC12 is a remote control? A computer keyboard? A computer mouse? The
answer is that RC12 a three-in-one multi-functional wireless air mouse
which has remote control function, computer keyboard function and
computer mouse function.
1. Remote control function
2. Computer keyboard function
3. Computer mouse function
II. Characteristics：
1. Standard AAA batteries design, can be used in all countries in the
world, also can avoid the drawbacks come from the built-in lithium
battery.(Heavy weight, easy to make the wrist fatigue; limited charging
times ,short lift; long charging time, hard to find the charging address
if need to be charged )
2. Whole-fish-soup-button design, to reduce the impedance of the general
carbon film key from the current, and improves the sensitivity of the
remote control
3. Wireless air mouse reserves storage space for the USB receiver, and
eliminates the worry about losing the receiver completely.
4. Standard keyboard design, make you can output at any time. No generally
omit keyboard and air mouse can match it.
5. The humane design of the artificial mechanics makes the users fell
extraordinary, comfortable and convenient.
6. The advanced power-saving technology improves the battery life a lot.
It will goes into dormancy in 2 minutes without working. The current of
dormancy is only 10uA.you can press any button to make it go on working.
7. Plug and play, no driver required. It can compatible with USB1.1 and
USB 2.0 interface.
8. Easy to connect, no cables required. Only if insert batteries, plug
the USB receiver into the devices’ USB interface, then you can use the
keyboard and mouse in the meantime.
9. Support Windows XP/Windows Vista/Windows 7 system; support Android
2.2/2.3/2.4/4.0/5.0.
10. Can be used for Computers, projectors, smart TV in sitting room, HDTC,
android tablet PC, android HD media player, Google smart TV player boxes.
III. The functions of buttons ：
A、Shortcut buttons function(the following functions are applied
to MEASY android media players )
Button Function
ESC Press to back or exit
Power Computer dormancy key, press to enter the relevant state
F4 Open the system default web browser home page
F5 Open Outlook Express
F6 Open the system default media player ,such as cool dog,
TT Player and so on
F7 The system default media player to play the last one
F8 The system default media player to play or stop
F9 The system default media player to play the next one
F10 Mute
F11 Press to increase volume
F12 Press to enter volume
B、The other functions of the keys are same as the
standard keyboards。
IV. Initialize settings
When the cursor appears to drift and cannot make it move, please follow
the operations of the air mouse to do initialize setting .
1. Please put the device on the desktop, press the up arrow and down arrow,
and Enter key sequentially, do not release other keys when you press each
one. While holding down these three keys for 1 second, the LED key of
the air mouse will become flashing state.
2. when the LED key become flashing state ,at the same time plug the USB
receiver into the USB interface of the device ,air mouse will start to
initialize code. The LED key will become lit state after 5 seconds, that
is mean the air mouse do initialize setting successful.
V. The area of the function keys
1. Locating key：press the key ,the cursor is fixed and cannot move,
press again ,then the cursor will be to unlock.
2. The left button of the mouse: same function as the left button of the
standard mouse.
3. The right button of the mouse: same function as the right button of
the standard mouse.
VI. Installation and connection :
1. Open the back cover of the air mouse, install three new AAA batteries
(Note make sure of the polarity of the batteries are not backwards), then
close the back cover.
2. Plug the USB receiver into USB interface of the computers or android
media players
VII. Using ：
1. Using of the air mouse：
According to the printing direction of the green robot , with one
hand to hold the air mouse, make the wrist as the axis, then rotate the
wrist right and left or up and down, you can move the cursor freely.
2. Using of the wireless keyboard：
When moving the cursor to the specified location, pressing the locating
key of the mouse one time, the cursor will be locked. Turning the air
mouse 90 degrees counter-clockwise, holding both ends of the air mouse
with your hands , then you can use the keyboard to enter any characters
freely .
VIII. Instruction of the LED light state：
1. It means that it connects failed when the LED of the air mouse flashes,
2. The LED keep lighting, means connect well and can work.
3. Press any button, the LED light will flash once.
IX. Packing contents：
NO. Name Quantity（pc）
1 Wireless keyboard 1
2 USB receiver 1
3 User Manual 1
4 Repairing card 1
X.Product Specifications：
Technical Specifications
Hardware Specifications
RF radio frequency 2.4G RF
Power AAA Batteries.5V
Buttons life 1500,000 times
Main components Remote control+ USB receiver
The working current of the USB about 21.5 mA
receiver （A）
The working current of the about 20 mA
remote control（A）
Features
Signal transmission mode 2.4G RF
Keyboard layout QWERTY American standard keyboard（can be
modified according to the customers’
requirements）
Support operating system Windows XP / Vista / 7 / MAC / Linux /
Android2.2/2.3/4.0/5.0
Power save time of the 2 minutes
mouse
