Technical Data Sheet
EZ Panel Loc 480/600V Breaker Blocker
TDS No. LOTO-44
Effective Date: 10/10/2017
Description:
Design
● Perfect for locking out over-sized and
irregularly shaped switches
● Self-adhesive backed rails are permanently
installed into an electrical panel, simply clean
the panel surface and adhere!
● Blocking bars are offered in red and green,
red indicating locked off and green indicating
locked on
Material
● Glass-filled nylon
● UL Rating – UL 94 - HB
Chemical °C Chemical °C
Acetone 25 Petroleum 25
Temperature Range
Acetone 60 Turpentine oil 25
● -20° to 120°C (0° to 250°F)
Chlorine, chlorine water 25 Turpentine substitute (white spirit) 25
Fuel, engine: Gasoline (normal &
Chemical Resistance 85 Trichloroethane 1,1,1 45
premium grade)
All approved chemicals listed are based on the Lubricating oil: HD engine oils,
manufactures specified chemical resistance chart for Lubrication oil: gear oil < 120 < 120
hydraulic oils, transformer oils
plastic material only. Fuel, engine: M15 mixture (15%
70 Water (including seawater) 25
methanol)
Dimensions Water (including seawater),
Methanol 25 80
chlorinated (<0,5 mg/l)
A - 0.24” [6.10mm]
B - 0.12” [3.05mm]
C - 0.33” [8.38mm]
D - 4.00” [101.6mm]
E - 0.36” [9.14mm]
F - 0.70” [17.78mm]
G - 0.80” [20.32mm]
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document
are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting
specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should
contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or
based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no
independent representations or warranties expressed or implied, and assumes no liability in connection with the use of this information.
Details:
MSDS Information
1. HAZARDS IDENTIFICATION
This product is NOT DANGEROUS and contains no hazardous ingredients
2. FIRST AID MEASURES/HEALTH INFORMATION PROTECTION
Eye Contact: Not applicable, product is inert
Ingestion: Not applicable, first aid is not normally required.
Inhalation: Not applicable
Skin Contact: Not applicable, product is inert, except if product is melted use gloves. For hot melted product, immerse in or flush affected area
with water to dissipate heat, then obtain medical attention.
Exposure Limits: None
Threshold Limits None
Personal Protection: None (ambient conditions)
NPCA-HMIS Rating: Health: 0; Flammability: 1; Reactivity: 0
NFPA-704 Rating: Health: 0; Flammability: 1
; Reactivity: 0
3. FIRE-FIGHTING MEASURES
● Be cautious of hot melted Nylon ● Use water spray to cool fire, exposed surfaces, and to protect personnel
● Isolate product from fire ● Respiratory and eye protection is required for fire fighting personnel
● Extinguish fire with water spray ● Decomposition products under fire conditions: Oxygen-lean conditions may
cause monoxide and irritating s moke
4. ACCIDENTAL RELEASE MEASURES
Land Recover material and place in suitable c ontainer for reuse or for disposal in conformance with local regulations
Water Recover material and place in suitable c ontainer for reuse or for disposal in conformance with local regulations.
5. HANDLING AND STORAGE
5.1 Handling 5.2 Storage
No precautions noted-see local regulation if needed Storage pressure: Atmospheric
Storage temperature: A
mbient, no direct sunlight
6. EXPOSURE CONTROLS/PERSONAL PROTECTION
6.1 Exposure limit values 6.2 Exposure Controls
None 6.2.1 Occupational Exposure Controls
6.2.1.1 Respiratory Protection: N
ot applicable
6.2.1.2 Hand Protection: Not applicable
6.2.1.3 Eye Protection: Not applicable
6.2.1.4 Skin Protection: Not applicable
6.2.2 Environmental Exposure Controls: No data available
7. PHYSICAL AND CHEMICAL PROPERTIES
General Information
Other Information
8. STABILITY AND REACTIVITY
8.1 Conditions to Avoid
Higher Temperatures and direct sunlight (chemical resistance is excellent)
Highly stable, but temperatures over 480 F may cause degradation
8.2 Materials to Avoid
No data available
8.3 Hazardous Decomposition Products
Under fire and oxygen-lean conditions may cause monoxide and irritating smoke
9. ECOLOGICAL INFORMATION
9.1 Ecotoxicity No data available
9.2 Mobility No data available
9.3 Persistence and Degradability No data available
9.4 Bioaccumulative Potential No data available
9.5 Other Adverse Effects No data available
10. DISPOSAL CONSIDERATIONS
None of the materials in this product are Recyclable, dispose of all materials in accordance with an a
pplicable federal, state, and local law.
11. TRANSPORT INFORMATION
No data available
12. REGULATORY INFORMATION
This product has been tested and validated to the Regulatory Requirements listed below.
• OSHA 29 CFR 1910.147 ©(4)(ii)( A)(1)/(c) (5)(ii)(C)(1) • ANSI standard Z244
13. OTHER INFORMATION
No data available
Trademarks:
Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and
specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific
product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or
based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no
independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.
WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their
intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this
warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to
any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any
implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances
will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's
products.
Copyright 2019 Brady Worldwide, Inc. | All Rights Reserved
Material may not be reproduced or distributed in any form without written permission.
____________________________________________________________________________________________________________
Brady North America | 6555 West Good Hope Road | Milwaukee, Wisconsin 53223 | USA | Tel: 414-358-6600 | Fax: 414-228-5770
