Page 67

Komet (twin) Volume Guns

Product Description Part Number Weight List Price

101/SR w/nozzle-Twin - 180 pivot part 7-0231 20.9 1,144.00

Twin 101/Plus PC-24 deg 6-9769 20.9 1,144.00
Twin 101/Plus PC-VA 10-28 deg 6-9770 23.2 1,463.00
Twin 101/Plus FC-24 deg 6-9771 18.7 858.00
Waste Water Twin 101/Plus PC-24 deg 6-9772 20.9 1,259.00
Waste Water Twin 101/Plus PC-VA 10-28 deg 6-9773 23.2 1,610.00
Waste Water Twin 101/Plus FC-24 deg 6-9774 18.7 945.00
Dust Suppression, Twin 101/Plus PC-44 deg 6-9775 20.9 1,373.00
Dust Suppression, Twin 101/Plus PC-VA 28-24 deg 6-9776 23.2 1,756.00

Twin 140/Plus PC-VA 10-28 deg 6-9777 22.1 1,914.00

Komet 101/SR
Dust Suppression, Twin 140/Plus PC-44 deg 6-9778 22.1 1,889.00
Dust Suppression, Twin 140/Plus PC-VA 28-46 deg 6-9779 25.4 2,297.00
Twin 160/Plus PC-24 deg 6-9780 29.8 1,817.00
Twin 160/Plus PC-VA 16-28 deg 6-9781 34.2 2,401.00
Twin 160/Plus FC-24 deg 6-9782 25.4 1,363.00
Waste Water Twin 160/Plus PC-24 deg 6-9783 29.8 1,998.00
Waste Water Twin 160/Plus PC-VA 16-28 deg 6-9784 34.2 2,642.00
Waste Water Twin 160/Plus FC-24 deg 6-9785 25.4 1,498.00
Twin 202/Plus PC-VA 16-28 deg 6-9786 35.3 2,537.00
140/SR w/nozzle 24 deg 7-0251 22.1 1,574.00
* Price includes one nozzle. 202/SR w/nozzle 24 deg 7-0300 30.9 2,015.00
Available in 18o, 21o, or 24o angle trajectory

Twin 101 Taper bore nozzle >>> Trajectory 24°

Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle
PSI 0.47” 0.55” 0.63” 0.71” 0.79” 0.87” 0.94”
GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA.

30 - - 48 187’ 62 201’ 79 217’ 97 232’ 118 247’ 140 260’

40 40 183’ 55 203’ 72 220’ 91 234’ 112 250’ 136 265’ 162 279’
50 45 197’ 62 215’ 80 232’ 102 250’ 125 267’ 152 283’ 181 300’
60 50 212’ 67 230’ 88 247’ 111 266’ 138 282’ 167 298’ 198 315’
70 54 225’ 73 244’ 95 262’ 120 280’ 149 297’ 180 314’ 214 323’
80 57 237’ 78 257’ 102 276’ 129 294’ 159 312’ 192 329’ 229 344’

Gun Stands/Sprinklers
90 61 248’ 83 269’ 108 289’ 137 308’ 169 326’ 204 343’ 243 359’
100 64 257’ 87 280’ 114 300’ 144 320’ 178 339’ 215 357’ 256 374’
110 67 265’ 91 290’ 119 310’ 151 331’ 186 351’ 225 369’ 268 388’
N.B.: Performance data were obtained under ideal testing conditions and may be adversely affected by wind and other factors. Pressure refers to pressure at nozzle. A lowered trajectory angle improves the irrigation efficiency in windy
conditions. For every 3° drop of the trajectory angle the throw is reduced by approximately 3 to 4%. For solid-set applications, it is advised to take into account the appropriate throw-reduction factor for local atmospheric conditions in order to
assure overlapping and coverage of the irrigated area.

Twin 140 Taper bore nozzle >>> Trajectory 24°

Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle
PSI 0.63” 0.71” 0.79” 0.87” 0.94” 1.02” 1.10” 1.18”
GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA.
30 62 201’ 79 217’ 97 232’ 118 247’ 140 260’ 164 275’ 191 286’ 219 300’
40 72 220’ 91 234’ 112 250’ 136 265’ 162 279’ 190 293’ 220 307’ 253 318’
50 80 232’ 102 250’ 125 267’ 152 283’ 181 300’ 212 315’ 246 330’ 283 343’
60 88 247’ 111 266’ 138 282’ 167 298’ 198 315’ 233 331’ 270 347’ 310 360’
70 95 262’ 120 280’ 149 297’ 180 314’ 214 323’ 251 347’ 291 362’ 334 376’
80 102 276’ 129 294’ 159 312’ 192 329’ 229 344’ 269 361’ 311 376’ 358 391’
90 108 289’ 137 308’ 169 326’ 204 343’ 243 359’ 285 376’ 330 392’ 379 407’
100 114 300’ 144 320’ 178 339’ 215 357’ 256 374’ 300 390’ 348 407’ 400 422’
110 119 310’ 151 331’ 186 351’ 225 369’ 268 388’ 315 404’ 365 421’ 419 437’
120 125 318’ 158 341’ 195 362’ 235 380’ 280 400’ 329 416’ 381 432’ 437 448’
N.B.: Performance data were obtained under ideal testing conditions and may be adversely affected by wind and other factors. Pressure refers to pressure at nozzle. A lowered trajectory angle improves the irrigation efficiency in windy
conditions. For every 3° drop of the trajectory angle the throw is reduced by approximately 3 to 4%. For solid-set applications, it is advised to take into account the appropriate throw-reduction factor for local atmospheric conditions in order to
assure overlapping and coverage of the irrigated area.

Twin 160 Taper bore nozzle >>> Trajectory 24°

Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle
PSI 0.69” 0.79” 0.89” 0.98” 1.08” 1.18” 1.28” 1.38”
GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA.

40 85 221’ 110 229’ 139 239’ 172 254’ 208 268’ 248 279’ 291 291’ 337 301’
50 95 256’ 123 269’ 156 284’ 192 302’ 233 317’ 277 333’ 325 348’ 377 364’
60 104 283’ 135 294’ 171 315’ 211 334’ 255 350’ 303 367’ 356 386’ 413 401’
70 113 296’ 146 308’ 184 332’ 227 350’ 275 371’ 328 390’ 384 407’ 446 422’
80 120 305’ 156 321’ 197 345’ 243 364’ 294 384’ 350 404’ 411 421’ 476 436’
90 128 310’ 165 329’ 209 352’ 258 374’ 312 395’ 371 413’ 436 429’ 506 444’
100 135 314’ 174 334’ 220 357’ 272 379’ 329 401’ 392 418’ 459 434’ 533 450’
110 141 317’ 182 336’ 231 359’ 285 382’ 345 404’ 411 421’ 482 438’ 559 453’
120 147 318’’ 191 339’ 241 363’ 298 385’ 360 407’ 429 424’ 503 442’ 584 456’
N.B.: Performance data were obtained under ideal testing conditions and may be adversely affected by wind and other factors. Pressure refers to pressure at nozzle. A lowered trajectory angle improves the irrigation efficiency in windy
conditions. For every 3° drop of the trajectory angle the throw is reduced by approximately 3 to 4%. For solid-set applications, it is advised to take into account the appropriate throw-reduction factor for local atmospheric conditions in order
to assure overlapping and coverage of the irrigated area.

Twin 202 Taper bore nozzle / Trajectory 24°

Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle
PSI 0.79” 0.89” 0.98” 1.08” 1.18” 1.28” 1.38” 1.48” 1.58”
GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA.

40 110 229’ 139 239’ 172 254’ 208 268’ 248 279’ 291 291’ 337 301’ 387 309’ 440 319’
50 123 269’ 156 284’ 192 302’ 233 317’ 277 333’ 325 348’ 377 364’ 433 377’ 492 388’
60 135 294’ 171 315’ 211 334’ 255 350’ 303 367’ 356 386’ 413 401’ 474 414’ 539 427’
70 146 308’ 184 332’ 227 350’ 275 371’ 328 390’ 384 407’ 446 422’ 512 435’ 582 447’
80 156 321’ 197 345’ 243 364’ 294 384’ 350 404’ 411 421’ 476 436’ 547 450’ 622 458’
90 165 329’ 209 352’ 258 374’ 312 395’ 371 413’ 436 429’ 506 444’ 580 457’ 660 465’
100 174 334’ 220 357’ 272 379’ 329 401’ 392 418’ 459 434’ 533 450’ 612 461’ 696 470’
110 182 336’ 231 359’ 285 382’ 345 404’ 411 421’ 482 438’ 559 453’ 642 465’ 730 473’
120 191 339’ 241 363’ 298 385’ 360 407’ 429 424’ 503 442’ 584 456’ 670 469’ 762 476’
N.B.: Performance data were obtained under ideal testing conditions and may be adversely affected by wind and other factors. Pressure refers to pressure at nozzle. A lowered trajectory angle improves the irrigation efficiency in windy
conditions. For every 3° drop of the trajectory angle the throw is reduced by approximately 3 to 4%. For solid-set applications, it is advised to take into account the appropriate throw-reduction factor for local atmospheric conditions in order to
assure overlapping and coverage of the irrigated area.

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
Page 68

Sprinklers
Product Description Part Number Weight List Price

Volume Gun Comparison

Gun Part # GPM Ave GPM Diameter Ave Dia List
River 7-0325 23-131 77 120-228 174 $395.00
Skipper 7-0303 23-215 119 120-282 201 $410.00
Mercury 7-0304 23-215 119 120-282 201 $640.00
Twin 101SR 7-0231 40-268 154 183-388 286 $1,144.00
Nelson SR100 7-0295 47-304 176 191-380 286 $1,202.07
Big River 7-0305 119-378 249 196-354 275 $995.00
Twin 140SR 7-0251 62-437 250 201-448 325 $1,574.00
Nelson SR150 7-0250 100-545 323 250-460 355 $2,004.68
Twin 160SR 6-9780 110-584 347 229-456 343 $1,817.00
Mariner 7-0306 173-571 372 274-440 357 $1,075.00
Polaris 7-0326 263-598 431 302-418 360 $1,125.00
Twin 202SR 7-0300 110-762 436 229-476 353 $2,015.00
Gemini 7-0307 319-1110 715 328-570 449 $1,365.00
Nelson SR200 7-0290 250-1210 730 345-620 483 $4,706.00

Sprinkler Parts Available Volume Gun Parts Available

Nelson
Nelson
Rainbird Komet
Sime
Senninger
Rainbird
Buckner
CALL

1-800-246-3685

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
 Page 69

Nozzles & Press Regulators

Product Description Part Number Weight List Price

Nozzle Range 1/8" .125 7-0360 0.79

(for 3/4" Sprinkler) Range - 9/64" .140625 7-0330 0.79
Range - 5/32" .15625 7-0331 0.79
Range - 11/64" .171875 7-0332 0.79
Range - 3/16" .1875 7-0333 0.79
Range - 13/64" .203125 7-0334 0.79
Range - 7/32" .21875 7-0335 0.79
Range - 15/64" .234375 7-0336 0.79
Order vane separately.
Range - 1/4" .25 7-0337 0.79
Range - 17/64" .265625 7-0338 0.79
Range - 9/32" .28125 7-0339 0.79
Back Plug 7-0342 0.70
Spreader - 20o - 3/32" .09375 7-0340 0.98
Spreader - 20o - 7/64" .109375 7-0366 0.98
Spreader - 20o - 1/8" .125 7-0341 0.98
Spreader - 20o - 9/64" .140625 7-0362 0.98
Spreader - 20o - 5/32" .15625 7-0361 0.98
Spreader - 20o - 11/64" .171875 7-0364 0.98
Spreader - 20o - 3/16" .1875 7-0365 0.98
Spreader - 20o - 7/32" .21875 7-0363 0.98
Vanes for #30 (push-in) 6-9692 0.60

Nozzle Brass: Range - 7/32"

Range - 1/4"
.21875
.25
7-0343
7-0344
4.72
4.72
(for 1" Sprinkler)
Range - 9/32" .28125 7-0345 4.72
Range - 5/16" .3125 7-0346 4.72
Range - 11/32" .34375 7-0347 4.72
Range - 3/8" .375 7-0348 4.72
Range - 13/32" .40625 7-0349 4.72

*above for Rainbird #65 & #70

Plastic: Range - #14 - 7/32" .21875 7-0350 1.00

Gun Stands/Sprinklers
Range - #16 - 1/4" .25 7-0351 1.00
Range - #18 - 9/32" .28125 7-0352 1.00
Range - #20 - 5/16" .3125 7-0353 1.00
Range - #22 - 11/32" .34375 7-0354 1.00
Range - #24 - 3/8" .3375 7-0355 1.00
*above for Senninger #7025

Bearing Assembly 7-0356 7.50

(for #30 Rainbird)

Pressure Regulator

3/4" x 3/4" 15psi 7-0310 0.4 13.00

3/4" x 3/4" 20psi 7-0311 0.4 13.00
3/4" x 3/4" 25psi 7-0312 0.4 13.00
3/4" x 3/4" 30psi 7-0313 0.4 13.00
3/4" x 3/4" 40psi 7-0314 0.4 13.00
3/4" x 3/4" 50psi 7-0315 0.4 13.00
1-1/4" x 1" 10psi 7-0316 0.6 26.00
1-1/4" x 1" 15psi 7-0317 0.6 26.00
Both ends are Female threaded. 1-1/4" x 1" 20psi 7-0318 0.6 26.00
Male available upon request. 1-1/4" x 1" 30psi 7-0319 0.6 26.00
Also available as 1" x 1". Please 1-1/4" x 1" 40psi 7-0320 0.6 26.00
call for price.
1-1/4" x 1" 50psi 7-0321 0.6 26.00

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
Page 70

River Gear Drive Sprinklers

Product Description Part Number Weight List Price

River (P-190) River w/nozzle part 7-0325 10.4 395.00

River 190 28 Degree

Nozzle Diameter Pressure Diameter Discharge
Inch MM PSI Feet GPM
29 120 23
37 132 26
0.4 10 44 136 28
56 150 33
37 136 38
1 1/2" FPT base
Includes 3 nozzles 44 144 41
120' - 228' Diameter 0.47 12 51 156 44
56 170 47
37 136 51
44 150 56
0.55 14 51 164 61
66 176 68
44 164 73
51 176 79
0.63 16 56 188 84
70 204 94
44 164 92
56 204 107
0.71 18 70 216 119
85 228 131

Gear-driven sprinklers are ideal for use on delicate seeds and plants or on heavy soils where light, gentle applications are required. Smooth running, continuous rotation makes these ideal for use
on tripods, travelers or as an end sprinkler on pivots.
All nozzles come complete with 22o and 28o trajectory nozzles. Companion flanges included.

Advantages of "Sime" green Italian gear-driven volume sprinklers

Smooth, continuous rotation with superior stream break-up and less vibration compared to impact driven guns.
Gentle sweeps are ideal for tender crops such as carrots, spinach, green beans, etc.
Give better coverage due to their rapid rotation (average 90 seconds).
Will run in lower temperatures without freezing.
Includes flip nozzles allowing one gun to have 22 & 28 degree capabilities.
Full & part-circle arc adjustments require no tools.
Priced lower than impact-driven volume guns.
Optional 25o nozzle available.

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
 Page 71

River Gear Drive Sprinklers

Product Description Part Number Weight List Price
ITEM # DESCRIPTION PART # LIST PRICE ITEM # DESCRIPTION PART # LIST PRICE
River
1 Sprinkler Body 30168 $153.10 26 Inversion Spring 30203 $1.80
2 Gearbox 30169 40.30 27 Cover 30204 2.80
02 Complete Gearbox 10053 310.60 28 Gear Z11 30205 7.00
02am Complete American Gearbox 10169 446.20 29 Gear Z14 30206 7.70
03 Gearbox Cover 10378 11.40 30 Cover 30207 6.90
4 Internal Body 30172 46.60 32 Shafting Bar 20031 10.10
05 Complete Crown 10054 192.50 33 Shafting Bar Cover 20032 8.10
05a Crown 10380 78.80 34 Elastic Pin 30208 0.20
5b Toothed Ring 30175 36.30 35 Inversion Lever Cover 30209 3.90
6 U-Packing 30176 8.30 36 Nozzle 10Mm (.40”), River 30210-10 10.50
7 Sphere (35 required) 30177 0.20 36 Nozzle 12Mm (.47”), River 30210-12 10.50
8 Rectifier 30178 7.50 36 Nozzle 14Mm (.55”), River 30210-14 10.50
9 Endless Screw 30628 35.00 36 Nozzle 16Mm (.63”), River 30210-16 10.50
10 External Body Bearing 30180 4.60 36 Nozzle 18Mm (.71”), River 30210-18 10.50
10a Internal Body Bearing 30181 4.40 37 Nozzle Lock Ring 30211 4.90
11 Pinion Bearing 30182 2.50 38 Nozzle Packing 30567 0.90
12 Grub Screw 30183 0.80 039 Complete Jet-Breaker 10091-S 13.20
13 Inversion Lever 30184 8.00 41 Spring For Lever 30214 2.20
14 Complete Shaft 10084-S 14.00 42 Stream Breaker Lever 30215 9.30
15 Propeller 30186 26.30 042 Complete Stream Breaker Lever 10055 19.70
15a Du-Bearing For Gearbox 30677 6.90 42a Grub Screw 30216 0.50
16 Endless Screw 30628 35.00 43 Screw For Lever 30217 4.10
16a Grub Screw 30187 0.80 44 Nut 30218 1.40
017 Bearing House 10293 26.30 45 Grub Screw 30219 1.20
17a Du-Bearing 30189 6.90 46 Screw 30220 0.30
18 Blind Bearing 30190 9.90 47 Screw 30220 0.30
19 Toothed Wheel 30191 20.60 048 Shaft Bearing 10398-S 9.40
20 Gearbox Pinion 30192 11.20 48a Washer 30223 0.80

Gun Stands/Sprinklers
020 Complete Pinion 10365-S 35.00 049 Inversion Cotter Pin 10086-S 10.30
20a Pin For Pinion 30193 0.40 50 Cam 30227 2.60
21 Gearbox Gear 30109 14.90 51 Elastic Pin 30228 0.80
22 Gearbox Shaft 30195 13.20 52 Screw 30229 1.40
22a Pin 30196 0.40 53 Washer 30230 0.30
023 Gearbox Support 10411 30.60 54 Grease Nipple 30231 1.80
23a Ball Bearing 30198 20.20 57 Nut 30232 0.40
24 Screw 30199 0.80 58 Grease Nipple 30233 0.90
24a Nut 30200 0.20 59 Grease Nipple 30234 2.20
25 Spring House 30201 5.10

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
Page 72

Skipper Gear Drive Sprinklers

Product Description Part Number Weight List Price

Skipper (P-191) Skipper w/nozzle high speed part 7-0303 14.0 410.00
Skipper Tool (to open gear box) 6-9582 32.00

Skipper 191 28 Degree

Nozzle Diameter Pressure Diameter Discharge
Inch MM PSI Feet GPM
29 120 23
37 132 26
0.4 10 44 136 28
56 150 33
29 144 42
44 164 51
0.47 12 56 184 59
70 202 66
1 1/2" FPT 29 156 51
Includes 5 flip nozzles for 220 & 280 angles. 44 176 66
144' - 268' Diameter 0.55 14 56 196 76
70 216 86
29 170 68
44 190 83
0.63 16 56 208 96
70 228 107
29 182 54
44 202 106
0.71 18 56 222 124
70 242 137
29 196 93
44 216 106
0.78 20 56 242 124
70 268 163
44 236 161

0.86 22 51 254 186

56 274 209
44 248 167

0.94 24 51 262 193

56 282 215
Deduct 2% for 25 deg and 5% for 22 deg nozzles.

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
 Page 73

Skipper Gear Drive Sprinklers

Product Description Part Number Weight List Price
ITEM # DESCRIPTION PART # LIST PRICE ITEM # DESCRIPTION PART # LIST PRICE
Skipper
1 Sprinkler Body 10402-S $179.40 36a Nozzle, Flip 22/28 Deg, 14Mm (.55”) 3010354-14 $10.50
2 Complete Gearbox 10148-S 279.90 36a Nozzle, Flip 22/28 Deg, 16Mm (.63”) 3010354-16 10.50
2 Gearbox 30737 40.30 36a Nozzle, Flip 22/28 Deg, 18Mm (.71”) 3010354-18 10.50
3 Gearbox Cover 30738 17.10 36a Nozzle, Flip 22/28 Deg, 20Mm (.78”) 3010354-20 10.50
4 Internal Body 30739 43.30 36a Nozzle, Flip 22/28 Deg, 22Mm (.86”) 3010354-22 10.50
5 Crown 10379 76.60 36a Nozzle, Flip 22/28 Deg, 24Mm (.94”) 3010354-24 10.50
05/C Complete Mounted Crown 10149-S 161.00 37 Nozzle Lock Ring 30211 4.90
5d Ring Crown 3010377 28.00 38 Packing For Nozzle 30567 0.90
6 U-Packing 30743 8.30 39 Jet-Breaker 10183-S 13.20
7 Sphere (44 required) 30077 0.20 41 Jet-Breaker Ring 30764 2.50
8 Rectifier 30178 7.50 42 Complete Jet-Breaker Lever 10150 19.70
9 Body Endless Screw 30745 36.70 42 Jet-Breaker Lever 30765 8.80
10 External Bearing 30746 4.60 43 Screw For Lever 30217 4.10
10a Internal Bearing 30747 4.40 44 Nut 30218 1.40
11 Pinion Bearing 30748 2.50 46 Screw 30767 0.20
12 Grub Screw 30183 0.80 47 Screw 30768 0.20
13 Threaded Ring For Crown 20108 18.40 48 Secondary Pipe 20112 21.50
14 Ball Bearing Ring 20109 14.90 48a O-Ring D. 17,6 X 10 X 3,8 30734 0.70
14b Grub Screw 30752 0.60 50 Secondary Nozzle 30770 19.80
15 Propeller 30753 23.60 51 Ferrule 30771 12.40
16 Endless Screw 30628 35.00 52 Screw 30578 1.00
16a Grub Screw 30187 0.80 53 Washer 30772 0.20
17 Bearing House 10293 26.30 54 Washer 30773 1.20
18 Blind Bearing 30190 9.90 55 Inversion Ring 30774 19.70
19 Toothed Wheel 30191 20.60 56b Nut M4 30839 0.40
20 Gearbox Pinion 30755 10.90 57 Nut 30511 0.70
20a Pin For Pinion 30193 0.40 58 Central Shaft 10191-S 27.80
22 Planetary Slow 10255 30.30 59 Inversion Fork 10366 38.10

Gun Stands/Sprinklers
23 Slow Speed Gear 30758 2.80 59a Pin For Fork 30778 0.80
28 O-Ring 2237 30613 1.30 60 Spring House 30779 8.40
29 O-Ring 121 30678 0.50 61 Inversion Spring 301093 2.80
30 Cam 30227 2.60 62 Complete Inversion Lever Clamp 10295 34.80
31 Elastic Pin 30228 0.80 62a Pin For Clamp 30782 0.90
32 Shafting Bar 20107 10.60 63 Screw 30783 0.40
33 Shafting Bar Cover 20162 9.30 64a Spring For Bolt 30785 0.70
35 Grub Screw 30216 0.50 65 Bearing 30786 3.10
36 Nozzle, Standard 25 Deg, 10Mm (.40”) 30566-10 10.50 66 Du Bearing 30677 6.90
36 Nozzle, Standard 25 Deg, 12Mm (.47”) 30566-12 10.50 67 Du Bearing 30189 6.90
36 Nozzle, Standard 25 Deg, 14Mm (.55”) 30566-14 10.50 68 Grease Nipple 30233 0.90
36 Nozzle, Standard 25 Deg, 16Mm (.63”) 30566-16 10.50 75 Washer D. 5 30959 0.60
36 Nozzle, Standard 25 Deg, 18Mm (.71”) 30566-18 10.50 76 Seeger 3010378 8.30
36 Nozzle, Standard 25 Deg, 20Mm (.78”) 30566-20 10.50 77 Spring 3010379 1.80
36 Nozzle, Standard 25 Deg, 22Mm (.86”) 30566-22 10.50 78 Spacer 3010380 2.80
36 Nozzle, Standard 25 Deg, 24Mm (.94”) 30566-24 10.50 79 Shafting Bar 3010381 4.10
36a Nozzle, Flip 22/28 Deg, 10Mm (.40”) 3010354-10 10.50 79a Washer 3010382 0.70
36a Nozzle, Flip 22/28 Deg, 12Mm (.47”) 3010354-12 10.50 80 Prisoner 3010383 6.50

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
Page 74

Mercury Gear Drive Sprinklers

Product Description Part Number Weight List Price

Mercury (P-202) Mercury w/nozzle part 7-0304 22.0 640.00

Mercury 202 28 Degree

Nozzle Diameter Pressure Diameter Discharge
Inch MM PSI Feet GPM
29 120 23
37 132 26
0.4 10 44 136 28
56 150 33
29 144 42
44 164 51
*w/2" FPT base 0.47 12 56 184 59
Included 5 flip nozzles for 220 & 280 angles
146' - 280' Diameter 70 202 66
29 156 51
44 176 66
0.55 14 56 196 76
70 216 86
29 170 68
44 190 83
0.63 16 56 208 96
70 228 107
44 184 105
56 200 119
0.71 18 70 216 130
85 250 170
44 208 142
56 228 165
0.78 20 70 250 180
85 276 203
44 220 161
56 238 186
0.86 22 70 262 209
85 280 228
44 248 167

0.94 24 56 262 193

70 282 215
Deduct 2% for 25 deg and 5% for 22 deg nozzles.

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
 Page 75

Mercury Gear Drive Sprinklers

Product Description Part Number Weight List Price
ITEM # DESCRIPTION PART # LIST PRICE ITEM # DESCRIPTION PART # LIST PRICE
Mercury
1 Sprinkler Body 30681 $262.50 36 Nozzle, Standard 25 Deg, 24Mm (.94”) 30566-24 $10.50
2 Crown 10443 154.00 36a Packing For Nozzle 30567 0.90
2a Toothed Ring 30683 59.10 36i Nozzle, Flip 22/28 Deg, 10Mm (.40”) 3010354-10 10.50
2c Screw 30220 0.30 36i Nozzle, Flip 22/28 Deg, 12Mm (.47”) 3010354-12 10.50
3 Body Support 30684 78.80 36i Nozzle, Flip 22/28 Deg, 14Mm (.55”) 3010354-14 10.50
4 U-Packing 30685 8.30 36i Nozzle, Flip 22/28 Deg, 16Mm (.63”) 3010354-16 10.50
5 Ball Bearing Ring 30686 26.00 36i Nozzle, Flip 22/28 Deg, 18Mm (.71”) 3010354-18 10.50
6 Sphere (30 required) 30077 0.20 36i Nozzle, Flip 22/28 Deg, 20Mm (.78”) 3010354-20 10.50
7 Fastener Ring 30687 4.60 36i Nozzle, Flip 22/28 Deg, 22Mm (.86”) 3010354-22 10.50
8 U-Packing Ring 30688 22.30 36i Nozzle, Flip 22/28 Deg, 24Mm (.94”) 3010354-24 10.50
8a External O-Ring 30689 3.10 37 Gearbox Support 10411 30.60
8b Internal O-Ring 30690 2.60 38 Gearbox Shaft 30106 17.50
9 Endless Screw Body 30691 61.30 38a Elastic Pin 30196 0.40
9a Washer 30080 1.30 39 Ball Bearing 30198 20.20
10 Threaded Bearing 10397 12.70 40 Du-Bearing For Gearbox 30677 6.90
010a Internal Bearing 10395 8.80 41 Cover 30207 6.90
11 Pipe Head 30693 76.50 41a Plug 30108 0.50
12 Complete Principal Pipe 10377-S 196.90 42 Gearbox Gear 30109 14.90
12 Principal Pipe 20098 83.10 43 Grub Screw 30160 0.80
12a Ferrule For Pipe 30527 29.70 44 Complete Gearbox 10061 319.30
13 Elastic Pin 30208 0.20 44 Gearbox 30169 40.30
15 O-Ring 30588 2.20 45 Complete Pinion 10365-S 35.00
17 Secondary Nozzle 30087 6.20 45 Pinion 30192 11.20
18 Nozzle Lock Ring 30211 4.90 45a Pin For Pinion 30193 0.40
19 Jet Breaker Bar 20096 43.70 46 Pinion Bearing 30182 2.50
21 Stream Breaker Lever 10147 56.90 47 Toothed Wheel 30191 20.60
21a Screw 30091 0.60 48 Cover With Bearing 10378 11.40

Gun Stands/Sprinklers
22 Camme 30871 2.80 49 Bearing House 10293 26.30
23 Screw For Lever 30093 6.90 49a Du-Bearing 30189 6.90
24 Nut For Lever 30094 2.60 50 Propeller 30112 26.30
26 Screw 30229 1.40 51 Blind Bearing 30190 9.90
26a Nut 30232 0.40 52 Endless Screw 30628 35.00
27 Washer 30230 0.30 53 Spring House 30201 5.10
28 Shafting Bar 20097 8.90 54 Screw 30199 0.80
29 Shafting Bar Cover 20144 8.90 54a Nut 30200 0.20
30 Spring For Lever 30697 3.70 55 Inversion Spring 30113 2.00
31 Lateral Bevel Pinion 30098 33.50 56 Cover 30204 2.80
32 Central Bevel Pinion 30099 26.30 57 Inversion Lever 30184 8.00
33 Shaft 10083-S 24.10 58 Grub Screw 30118 0.80
34 Shaft Bearing 10401-S 18.40 59 Screw 30559 1.80
34a Washer 30223 0.80 60 Ring 30699 5.20
35 Plug 30102 6.20 61 Inversion Cotter Pin 10086-S 10.30
35a Washer 30103 0.30 62 Grub Screw 30118 0.80
36 Nozzle, Standard 25 Deg, 10Mm (.40”) 30566-10 10.50 64 Grub Screw 30219 1.20
36 Nozzle, Standard 25 Deg, 12Mm (.47”) 30566-12 10.50 65 Inversion Lever Cover 30120 5.20
36 Nozzle, Standard 25 Deg, 14Mm (.55”) 30566-14 10.50 67 Screw 30220 0.30
36 Nozzle, Standard 25 Deg, 16Mm (.63”) 30566-16 10.50 69 Grease Nipple 30233 0.90
36 Nozzle, Standard 25 Deg, 18Mm (.71”) 30566-18 10.50 70 Grease Nipple 30231 1.80
36 Nozzle, Standard 25 Deg, 20Mm (.78”) 30566-20 10.50 71 Grub Screw 30187 0.80
36 Nozzle, Standard 25 Deg, 22Mm (.86”) 30566-22 10.50 76 Grease Nipple 30234 2.20

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
Page 76

Big River Gear Drive Sprinklers

Product Description Part Number Weight List Price

Big River (P-250) Big River w/nozzle-Green part 7-0305 30.0 995.00

Big River 250 28 Degree

*Companion flange included.
Nozzle Diameter Pressure Diameter Discharge
Inch MM PSI Feet GPM
44 196 119
56 214 139
0.71 18 70 230 124
85 250 170
44 238 137
56 264 159
0.78 20 70 282 178
85 300 194
56 268 186
72 & 116mm flange base (companion flange included.)
66 282 197
Includes 5 flip nozzles for 220 & 280 angles
238' - 354' Diameter
0.86 22 70 294 208
85 314 228
56 282 217
66 294 230
0.94 24 70 308 243
85 328 266
56 294 250
70 314 380
1 26 85 338 307
100 346 330
56 302 286
70 320 319
1.1 28 85 340 350
100 354 378
Deduct 2% for 25 deg and 5% for 22 deg nozzles.

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
 Page 77

Big River Gear Drive Sprinklers

Product Description Part Number Weight List Price

ITEM # DESCRIPTION PART # LIST PRICE ITEM # DESCRIPTION PART # LIST PRICE
Big River
1 Sprinkler Body 30070 $382.70 36 Nozzle, Standard 25 Deg, 30Mm (1.2”) 30063-30 $10.50
010a Internal Bearing 10395 8.80 36a Packing For Nozzle 30064 1.20
2 Crown 10077-S 192.50 36i Nozzle, Flip 22/28 Deg, 18Mm (.71”) 3010448-18 10.50
3 Body Support 10080-S 113.70 36i Nozzle, Flip 22/28 Deg, 20Mm (.78”) 3010448-20 10.50
4 U-Packing 90X76X8 30075 13.60 36i Nozzle, Flip 22/28 Deg, 22Mm (.86”) 3010448-22 10.50
5 Ball Bearing Ring 30076 32.30 36i Nozzle, Flip 22/28 Deg, 24Mm (.94”) 3010448-24 10.50
6 Sphere (43 required) 30077 0.20 36i Nozzle, Flip 22/28 Deg, 26Mm (1”) 3010448-26 10.50
7 Fastener Ring D. 78 30078 8.10 36i Nozzle, Flip 22/28 Deg, 28Mm (1.10”) 3010448-28 10.50
8 U-Packing Ring 30079 7.20 37 Gearbox Support 10411 30.60
9 Endless Screw Body 30596 78.80 38 Gearbox Shaft 30106 17.50
9a Washer 30080 1.30 38a Elastic Pin 30196 0.40
10 Threaded Bearing 10394 14.00 39 Ball Bearing 30198 20.20
11 Pipe Head 30083 119.90 40 Du-Bearing For Gearbox 30677 6.90
12 Complete Principal Pipe 10376 258.10 41 Cover 30207 6.90
12 Principal Pipe 20022 105.00 41a Plug 30108 0.50
12a Ferrule For Pipe 30084 44.90 42 Gearbox Gear 30109 14.90
13 Elastic Pin 30208 0.20 43 Grub Screw 30110 0.80
14 Secondary Pipe 20094 28.40 44 Complete Gearbox 10061 319.30
15 O-Ring For Pipe 30085 2.70 44 Gearbox 30169 40.30
16 Elastic Pin 30086 0.20 45 Complete Pinion 10365-S 35.00
17 Secondary Nozzle 30125 7.20 45 Pinion 30192 11.20
18 Nozzle Lock Ring 30056 15.10 45a Pin For Pinion 30193 0.40
19 Jet Breaker Bar 10090-S 65.00 46 Pinion Bearing 30182 2.50
20 Stream Breaker Bearing 30181 4.40 47 Toothed Wheel 30191 20.60
21 Stream Breaker Lever 10056 67.80 48 Cover With Bearing 10378 11.40
21a Screw 30091 0.60 49 Bearing House 10293 26.30
22 Camme 30092 11.80 49a Du-Bearing 30189 6.90
23 Screw For Lever 30093 6.90 50 Propeller 30112 26.30

Gun Stands/Sprinklers
24 Nut For Lever 30094 2.60 51 Blind Bearing 30190 9.90
25 Lever Upper Screw 30095 6.90 52 Endless Screw 30628 35.00
25a Elastic Pin 30096 0.20 53 Spring House 30201 5.10
26 Screw 30229 1.40 54 Screw 30199 0.80
26a Nut 30232 0.40 54a Nut 30200 0.20
27 Washer 30230 0.30 55 Inversion Spring 30113 2.00
28 Shafting Bar 20024 13.20 56 Cover 30204 2.80
29 Shafting Bar Cover 20025-S 13.20 57 Inversion Lever 30184 8.00
30 Spring For Lever 30059 5.10 58 Grub Screw 30114 0.80
31 Lateral Bevel Pinion 30098 33.50 59 Stud Bolt 30115 2.20
32 Central Bevel Pinion 30099 26.30 60 Nut M 10X6 30116 0.40
33 Shaft 10083-S 24.10 61 Inversion Cotter Pin 10087-S 10.90
34 Shaft Bearing 10401-S 18.40 62 Grub Screw 30118 0.80
34a Washer 30223 0.80 63 Body Support Packing 30119 7.20
35 Plug 30102 6.20 64 Grub Screw 30219 1.20
35a Washer 30103 0.30 65 Inversion Lever Cover 30120 5.20
36 Nozzle, Standard 25 Deg, 18Mm (.71) 30063-18 10.50 67 Screw 30220 0.30
36 Nozzle, Standard 25 Deg, 20Mm (.78”) 30063-20 10.50 68 Nut M10X10 30121 0.70
36 Nozzle, Standard 25 Deg, 22Mm (.86”) 30063-22 10.50 69 Grease Nipple 30233 0.90
36 Nozzle, Standard 25 Deg, 24Mm (.94”) 30063-24 10.50 70 Grease Nipple 30231 1.80
36 Nozzle, Standard 25 Deg, 26Mm (1”) 30063-26 10.50 71 Grub Screw 30187 0.80
36 Nozzle, Standard 25 Deg, 28Mm (1.10”) 30063-28 10.50 76 Grease Nipple 30233 0.90

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
Page 78

Mariner Gear Drive Sprinklers

Product Description Part Number Weight List Price

Mariner (P-401) Mariner w/nozzle-Green high speed part 7-0306 40.0 1,075.00
Mariner 401 28 Degree
Nozzle Diameter Pressure Diameter Discharge
Inch MM PSI Feet GPM
44 274 173
56 308 211
1 26
70 336 244
85 354 273
44 294 242
56 320 280
1.1 28
70 340 313
85 362 343
56 382 319
70 354 356
1.2 30
w/2 1/2" FTP base 85 374 390
Includes 5 flip nozzles for 220 & 280 angles
274' - 440' Diameter 100 398 421
56 340 359
70 368 402
1.25 32
85 384 440
100 404 475
70 374 451
85 398 494
1.35 34
100 420 533
115 440 571
Deduct 2% for 25 deg and 5% for 22 deg nozzles.

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
 Page 79

Mariner Gear Drive Sprinklers

Product Description Part Number Weight List Price
ITEM # DESCRIPTION PART # LIST PRICE ITEM # DESCRIPTION PART # LIST PRICE
Mariner
1 Sprinkler Body 10403-S $437.40 36 Nozzle, Standard 25 Deg, 34Mm (1.35”) 30063-34 $10.50
2 Complete Gearbox 10282 437.40 36i Nozzle, Flip 22/28 Deg 26Mm (1”) 3010448-26 10.50
2 Gearbox 30737 40.30 36i Nozzle, Flip 22/28 Deg 28Mm (1.10”) 3010448-28 10.50
3 Gearbox Cover 301041 19.70 36i Nozzle, Flip 22/28 Deg 30Mm (1.2”) 3010448-30 10.50
3a Cover 301042 26.30 36i Nozzle, Flip 22/28 Deg, 32Mm (1.25”) 3010448-32 10.50
4 Body Support 30862 102.80 36i Nozzle, Flip 22/28 Deg, 34Mm (1.35”) 3010448-34 10.50
5 Crown 30863 100.60 37 Nozzle Lock Ring 30056 15.10
5a Screw 30945 1.60 38 Packing For Nozzle O-Ring 3218 30064 1.20
5b Ring Body Support 3010385 52.00 39 Jet-Breaker 10189-S 61.30
5c Ring 3010363 80.10 40 Pipe-Head 30874 57.30
6 U-Packing Crown 30864 13.20 41 Jet Breaker Spring 30875 3.80
7 Sphere (52 required) 30048 0.40 42 Jet-Breaker Lever 10190 54.70
8 Threaded Body Support 30865 95.80 42a Screw 6X10 30091 0.60
9 Endless Screw 30866 70.70 43 Screw For Lever 30093 6.90
9a Grub Screw 30160 0.80 44 Nut For Lever 30094 2.60
9b Plug 30108 0.50 45 Principal Pipe 20127 98.40
10 Threaded Bearing 10394 14.00 46 Screw 30767 0.20
010a Internal Bearing 10404-S 9.40 47 Locking Ring For Pipe 30877 38.60
10b Washer 30080 1.30 47a O-Ring 3225 30949 2.50
10c Grub Screw 30114 0.80 48 Secondary Pipe 20112 21.50
11 Pinion Bearing 30748 2.50 48a O-Ring 17,6X10X3,8 30734 0.70
12 Gearbox Central Body 301050 76.60 50 Secondary Nozzle 30878 21.60
13 Threaded Ring For Crown 30868 40.30 51 Ferrule 30771 12.40
13a Screw 301014 1.30 52 Screw 6X25 30500 0.90
14 Ball Bearing Ring 30869 43.70 53 Washer Grower D. 6 30557 0.70
15 Propeller 301054 28.40 53a Nut 6X5 30511 0.70
16 Endless Screw 30831 35.00 54 Washer 30773 1.20
16a Grub Screw 30187 0.80 55 Inversion Ring 30879 23.30
17 Bearings House 10293 26.30 56 Cover For Lever 30968 13.90
17a Lever 301055 12.20 56a Screw 4X30 30973 1.00

Gun Stands/Sprinklers
18 Blind Bearing 30190 9.90 56b Nut 4Ma 30839 0.40
018a Bush 10294 32.60 58 Central Shaft 10188 28.40
19 Crown 30833 20.60 59 Inversion Fork 10366 38.10
19a Spring 30817 1.40 59a Pin For Fork 30778 0.80
20 High Speed Pinion 30836 19.70 60 Spring House 30779 8.40
20a Pin For Pinion 30193 0.40 61 Inversion Spring 301093 2.80
22 Planetary 10285 30.20 62 Vice For Inversion Lever 10295 34.80
022a Second Planetary 10286 106.10 62a Pin For Vice 30782 0.90
23 High Speed Gear 30835 2.80 63 Screw 5X16 30783 0.40
23a Stud Bolt 301060 4.90 64a Spring For Bolt 30785 0.70
24 Pinion 10287-S 51.00 65 Inversion Lever Bearing 30880 3.50
24a Screw 6X30 30965 2.20 66 Du-Bearing For Gearbox 30677 6.90
25a Nut 30270 0.70 67 Du-Bearing 30189 6.90
26 O-Ring 30870 21.90 68 Grease Nipple 30233 0.90
28 O-Ring 2237 30613 1.30 70 Screw 8X25 30426 1.50
28a O-Ring 123 301064 0.40 71 Nut 8X6 30475 0.60
29 O-Ring 121 30678 0.50 72 Grub Screw 30724 0.70
29a Washer Inox 30532 0.70 73a Elastic Pin 30086 0.20
30 Cam 30695 2.60 74 Plug 30102 6.20
31 Elastic Pin 30208 0.20 74a Washer 30103 0.30
32 Shafting Bar 20142 8.50 76 Fastener Ring 30049 13.10
33 Shafting Bar Cover 20145 8.50 77 Gearbox Support 301091 66.10
35 O-Ring 3300 30946 3.20 78 Spring 3010358 1.80
35a O-Ring 3262 30947 2.50 78a Spacer 3010359 2.80
36 Nozzle, Standard 25 Deg, 26Mm (1”) 30063-26 10.50 79 Shafting Bar 3010360 4.10
36 Nozzle, Standard 25 Deg, 28Mm (1.10”) 30063-28 10.50 79a Washer 3010361 0.70
36 Nozzle, Standard 25 Deg, 30Mm (1.2”) 30063-30 10.50 79b Prisoner 3010362 6.90
36 Nozzle, Standard 25 Deg, 32Mm (1.25”) 30063-32 10.50

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
Page 80

Polaris Gear Drive Sprinklers

Product Description Part Number Weight List Price

Polaris (P-200) Polaris part 7-0326 32.7 1,125.00

Polaris 200 28 Degree

Nozzle Diameter Pressure Diameter
Inch MM PSI Feet GPM
56 302 263
70 230 295
1 26
85 340 323
100 362 348
56 314 300
70 328 324
1.1 28
85 354 366
100 380 395
56 320 338
90 & 150mm flange connection (companion flange included) 70 340 378
Includes 5 flip nozzles for 220 & 280 angles 1.2 30
302' - 418' Diameter
85 368 414
100 384 446
70 362 423
85 380 464
1.25 32
100 394 500
115 404 536
70 374 472
85 394 517
1.35 34
100 404 558
115 418 598
Deduct 2% for 25 deg and 5% for 22 deg nozzles.

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
 Page 81

Polaris Gear Drive Sprinklers

Product Description Part Number Weight List Price
ITEM # DESCRIPTION PART # LIST PRICE ITEM # DESCRIPTION PART # LIST PRICE
Polaris
1 Sprinkler Body 30070 $382.70 36 Nozzle, Standard 25 Deg, 34Mm (1.35”) 30063-34 $10.50
2 Crown 10076 223.00 36a Packing For Nozzle 30064 1.20
3 Body Support 10079 135.60 36i Nozzle, Flip 22/28 Deg 26Mm (1”) 3010448-26 10.50
4 U-Packing 117X98X11 30046 16.20 36i Nozzle, Flip 22/28 Deg 28Mm (1.10”) 3010448-28 10.50
5 Ball Bearing Ring 30047 39.30 36i Nozzle, Flip 22/28 Deg 30Mm (1.2”) 3010448-30 10.50
6 Sphere (36 required) 30048 0.40 36i Nozzle, Flip 22/28 Deg, 32Mm (1.25”) 3010448-32 10.50
7 Fastener Ring 30049 13.10 36i Nozzle, Flip 22/28 Deg, 34Mm (1.35”) 3010448-34 10.50
8 U-Packing Ring 30050 8.10 37 Gearbox Support 10411 30.60
9 Endless Screw Body 30596 78.80 38 Gearbox Shaft 30106 17.50
9a Washer 30080 1.30 38a Elastic Pin 30196 0.40
10 Threaded Bearing 10394 14.00 39 Ball Bearing 30198 20.20
010a Internal Bearing 10396 12.20 40 Du-Bearing For Gearbox 30677 6.90
11 Pipe Head 30052 140.00 41 Cover 30207 6.90
12 Complete Principal Pipe 10375-S 288.70 41a Plug 30108 0.50
12 Principal Pipe 20013 131.20 42 Gearbox Gear 30109 14.90
12a Threaded Ring For Pipe 30053 59.10 43 Grub Screw 30160 0.80
13 Elastic Pin 30208 0.20 44 Complete Gearbox 10060 319.30
14 Secondary Pipe 20014 35.00 44 Gearbox 30169 40.30
15 O-Ring For Pipe 30054 6.20 45 Complete Pinion 10365-S 35.00
16 Elastic Pin 30208 0.20 45 Pinion 30192 11.20
17 Secondary Nozzle 30125 7.20 45a Pin For Pinion 30193 0.40
18 Nozzle Lock Ring 30056 15.10 46 Pinion Bearing 30182 2.50
19 Jet Breaker Bar 10089-S 85.30 47 Toothed Wheel 30191 20.60
20 Stream Breaker Bearing 30057 4.40 48 Cover With Bearing 10378 11.40
21 Stream Breaker Lever 10058 67.80 49 Bearing House 10293 26.30
21a Screw 30091 0.60 49a Du-Bearing 30189 6.90
22 Camme 30092 11.80 50 Propeller 30112 26.30
23 Screw For Lever 30093 6.90 51 Blind Bearing 30190 9.90

Gun Stands/Sprinklers
24 Nut For Lever 30094 2.60 52 Endless Screw 30628 35.00
25 Lever Upper Screw 30095 6.90 53 Spring House 30201 5.10
25a Elastic Pin 30096 0.20 54 Screw 30199 0.80
26 Screw 30229 1.40 54a Nut 30200 0.20
26a Nut 30232 0.40 55 Inversion Spring 30066 2.10
27 Washer 30230 0.30 56 Cover 30204 2.80
28 Shafting Bar 20016 15.70 57 Inversion Lever 30184 8.00
29 Shafting Bar Cover 20017 16.20 58 Grub Screw 30118 0.80
30 Spring For Lever 30059 5.10 59 Stud Bolt 30115 2.20
31 Lateral Bevel Pinion 30060 39.80 60 Nut M 10X6 30116 0.40
32 Central Bevel Pinion 30061 29.10 61 Inversion Cotter Pin 10087-S 10.90
33 Shaft 10082 28.00 62 Grub Screw 30118 0.80
34 Shaft Bearing 10399 21.90 63 Body Support Packing 30068 10.10
34a Washer 30223 0.80 64 Grub Screw 30219 1.20
35 Plug 30102 6.20 65 Inversion Lever Cover 30069 7.60
35a Washer 30103 0.30 67 Screw 30220 0.30
36 Nozzle, Standard 25 Deg, 26Mm (1”) 30063-26 10.50 68 Nut M10X10 30121 0.70
36 Nozzle, Standard 25 Deg, 28Mm (1.10”) 30063-28 10.50 69 Grease Nipple 30233 0.90
36 Nozzle, Standard 25 Deg, 30Mm (1.2”) 30063-30 10.50 70 Grease Nipple 30231 1.80
36 Nozzle, Standard 25 Deg, 32Mm (1.25”) 30063-32 10.50 71 Grub Screw 30187 0.80

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
Page 82

Gemini Gear Drive Sprinklers

Product Description Part Number Weight List Price

Gemini (p-600 / p-1200) Gemini (2 speed high or low switch) part 7-0307 34.7 1,365.00
Gemini 1200 28 Degree
Nozzle Diameter Pressure Diameter Discharge
Inch MM PSI Feet GPM
56 328 319
70 354 356
1.2 30 85 374 390
100 398 421
70 368 424
85 84 464
1.25 32 100 404 500
115 426 536
70 380 472
85 398 518
1.35 34 100 420 558
115 440 598
70 398 525
100 x 142mm flange connection (companion flange included) 85 420 574
Includes 5 flip nozzles for 220 & 280 angles 1.42 36 100 440 620
368' - 510' Diameter
115 458 664
85 434 635
100 458 685
1.5 38 115 472 733
128 492 777
85 446 698
100 472 753
1.57 40 115 488 806
128 510 855
88 460 717
95 480 761
1.65 42 100 500 783
110 524 809
88 470 700
95 480 730
1.72 44 100 490 750
110 500 810
88 474 825
95 484 855
1.8 46 100 494 875
110 504 905
88 480 910
95 490 940
1.87 48 100 500 960
110 510 995
88 500 925
95 520 955
1.95 50 100 540 1075
110 570 1110
Deduct 2% for 25 deg and 5% for 22 deg nozzles.

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
 Page 83

Gemini Gear Drive Sprinklers

Product Description Part Number Weight List Price
ITEM # DESCRIPTION PART # LIST PRICE ITEM # DESCRIPTION PART # LIST PRICE
Gemini
1 Sprinkler Body 301040 $612.40 36i Nozzle, Flip 22/28 Deg, 30Mm (1.2”) 3010448-30 $10.50
2 Complete Gearbox 10282 437.40 36i Nozzle, Flip 22/28 Deg, 32Mm (1.25”) 3010448-32 10.50
2 Gearbox 30737 40.30 36i Nozzle, Flip 22/28 Deg, 34Mm (1.35”) 3010448-34 10.50
3 Gearbox Cover 301041 19.70 36i Nozzle, Flip 22/28 Deg, 36Mm (1.42”) 3010448-36 10.50
3a Cover 301042 26.30 36i Nozzle, Flip 22/28 Deg, 38Mm (1.50”) 3010448-38 10.50
4 Body Support 10390 215.60 36i Nozzle, Flip 22/28 Deg, 40Mm (1.57”) 3010448-40 10.50
5 Crown 301045 301.80 36i Nozzle, Flip 22/28 Deg, 42Mm (1.65”) 3010448-42 10.50
5a Stud Bolt 301046 5.70 36i Nozzle, Flip 22/28 Deg, 44Mm (1.72”) 3010448-44 10.50
5b Ring Body Support 3010365 65.60 36i Nozzle, Flip 22/28 Deg, 46Mm (1.80”) 3010448-46 10.50
5c Ring 3010365 65.60 36i Nozzle, Flip 22/28 Deg, 48Mm (1.87”) 3010448-48 10.50
6 U-Packing Crown 301047 17.30 36i Nozzle, Flip 22/28 Deg, 50Mm (1.95”) 3010448-50 10.50
7 Sphere (74 required) 30048 0.40 37 Nozzle Lock Ring 30056 15.10
8 Screw 6X15 T.E. 301083 0.90 38 Packing For Nozzle O-Ring 3218 30064 1.20
8a Screw 6X15 T.C.E.I. 301084 1.20 39 Jet-Breaker 10288-S 139.50
9 Endless Screw 301048 91.00 40 Pipe-Head 301068 83.10
9a Grub Screw 30160 0.80 41 Jet Breaker Spring Lever 3010444 5.20
9b Plug 30108 0.50 42 Jet-Breaker Lever 10190 54.70
10 Threaded Bearing 10394 14.00 42a Screw 6X10 30091 0.60
010a Internal Bearing 10404-S 9.40 43 Screw For Lever 30093 6.90
10b Washer 30080 1.30 44 Nut For Lever 30094 2.60
10c Grub Screw 30118 0.80 45 Principal Pipe 20145 8.50
11 Pinion Bearing 30748 2.50 47 Locking Ring For Pipe 30053 59.10
12 Gearbox Central Body 301050 76.60 47a O-Ring 30054 6.20
13 Threaded Ring For Crown 301052 72.80 48 Secondary Pipe 20159 32.30
13a Screw 301014 1.30 48a O-Ring 301069 0.80
14 Ball Bearing Ring 301053 93.40 49 Nut 10X6 30116 0.40
15 Propeller 301054 28.40 50 Secondary Nozzle 301070 22.90
16 Endless Screw 30831 35.00 51 Ferrule 301071 13.40
16a Grub Screw 30187 0.80 52 Screw 6X25 30500 0.90
17 Bearings House 10293 26.30 53 Washer Grower D. 6 30557 0.70
17a Lever 301055 12.20 53a Nut 6X5 30511 0.70
18 Blind Bearing 30190 9.90 54 Washer 30773 1.20
018a Bush 10294 32.60 55 Inversion Ring 301072 31.00
19 Crown 30833 20.60 58 Central Shaft 10289 31.00

Gun Stands/Sprinklers
19a Spring 30817 1.40 59 Inversion Fork 10290 41.60
20 High Speed Pinion 30836 19.70 59a Pin For Fork 301077 0.80
20a Pin For Pinion 30193 0.40 60 Spring House 301078 12.90
21a Pin 301058 1.50 61 Inversion Spring 301079 4.20
22 Planetary 10285 30.20 62 Vice For Inversion Lever 10291 48.10
022a Second Planetary 10286 106.10 62a Pin For Vice 30782 0.90
23 High Speed Gear 30835 2.80 63 Screw 5X16 30783 0.40
23a Stud Bolt 301060 4.90 64 Screw 3010181 4.10
24 Pinion 10287-S 51.00 64a Spring For Bolt 30785 0.70
24a Screw 6X30 30965 2.20 66 Du-Bearing For Gearbox 30677 6.90
25a Nut 30270 0.70 67 Du-Bearing 30189 6.90
26 O-Ring 301063 46.00 68 Grease Nipple 30233 0.90
28 O-Ring 2237 30613 1.30 69 Gerbox Support 3010181 4.10
28a O-Ring 123 301064 0.40 70 Screw 30521 1.80
29 O-Ring 121 30678 0.50 71 Nut 8X6 30475 0.60
29a Washer Inox 30532 0.70 72 Grub Screw 30724 0.70
30 Cam 30695 2.60 73 Stream Breaker Bearing 30057 4.40
31 Elastic Pin 30208 0.20 73a Elastic Pin 30208 0.20
32 Shafting Bar 20161 9.60 74 Plug 30102 6.20
33 Shafting Bar Cover 20156 9.60 74a Washer 30103 0.30
35 O-Ring 301066 3.70 75 Nut 30121 0.70
35a O-Ring 301067 3.10 76 Levers Support 10292 76.60
36 Nozzle, Standard 25 Deg, 30Mm (1.2”) 30063-30 10.50 77 Seeger 3010367 15.10
36 Nozzle, Standard 25 Deg, 32Mm (1.25”) 30063-32 10.50 78 Spring 301016 2.10
36 Nozzle, Standard 25 Deg, 34Mm (1.35”) 30063-34 10.50 79 Spacer 3010368 3.10
36 Nozzle, Standard 25 Deg, 36Mm (1.42”) 30063-36 10.50 80 Shafting Bar 3010369 4.40
36 Nozzle, Standard 25 Deg, 38Mm (1.50”) 30063-38 10.50 81 Washer 3010370 0.70
36 Nozzle, Standard 25 Deg, 40Mm (1.57”) 30063-40 10.50 82 Prisoner 3010371 7.50
36 Nozzle, Standard 25 Deg, 42Mm (1.65”) 30063-42 10.50 83 Flange 3010374 306.20
36 Nozzle, Standard 25 Deg, 44Mm (1.72”) 30063-44 10.50 84 Gasket 3010372 5.20
36 Nozzle, Standard 25 Deg, 46Mm (1.80”) 30063-46 10.50 85 Gasket 3010373 7.90
36 Nozzle, Standard 25 Deg, 48Mm (1.87”) 30063-48 10.50 86 Nut 30270 0.70
36 Nozzle, Standard 25 Deg, 50Mm (1.95”) 30063-50 10.50 87 Screw 10X35 3010375 1.70

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011
Page 84

Product Description Part Number Weight List Price

Schumacher Irrigation
is your source for find
irrigation parts, and
custom built irrigation
fittings.

Schumacher Irrigation, Inc. Phone: 402-246-3685 or 800-246-3685 Fax: 402-246-2072

Prices effective January 1, 2011