SEAT

GENERAL INFORMATION 47-3 Front Passenger Seat Assembly 

Description 47-3 (Manual Seat) 47-17
Specifications 47-6 Removal 47-17
Tool 47-6 Disassembly 47-19
Circuit Diagram 47-7 Assembly 47-22
Installation 47-22
DIAGNOSIS & TESTING 47-8 Inspection 47-23
Problem Symptoms Table 47-8 Rear Seat Assembly 47-25
ON-VEHICLE SERVICE 47-9 Removal 47-25
Driver Seat Assembly (Power Seat) 47-9 Disassembly 47-27
Removal 47-9 Assembly 47-28
Disassembly 47-11 Installation 47-29
Assembly 47-14 Inspection 47-29
Installation 47-15
Inspection 47-15

47

Chery Automobile Co., Ltd. 47–1

47

47–2 Chery Automobile Co., Ltd.

 47 - SEAT

GENERAL INFORMATION
SEAT

Description
Driver Seat Assembly

2 3

7
6
×2 4

5
×4

9
8

10

13 11
12

×2

RM16470001

47
1 - Driver Seat Headrest Assembly 2 - Driver Seat Headrest Guide (w/o Button)
3 - Driver Seat Headrest Guide (w/ Button) 4 - Driver Seatback Sub-assembly
5 - Driver Seat Lumbar Support Handle 6 - Driver Seat Inner Shield Assembly
7 - Driver Seat Belt Buckle 8 - Driver Seat Power Switch Box
9 - Driver Seat Track Cover 10 - Driver Seat Outer Shield Assembly
11 - Driver Seat Reclining Power Button 12 - Driver Seat Track Adjusting Power Button
13 - Driver Seat Track Assembly

Chery Automobile Co., Ltd. 47–3

 47 - SEAT

Front Passenger Seat Assembly

2
3

5
6 4

×3
7

12
9

10
×2

11

13

47 RM16470002

1 - Front Passenger Seat Headrest Assembly 2 - Front Passenger Seat Headrest Guide (w/o
Button)
3 - Front Passenger Seat Headrest Guide (w/ 4 - Front Passenger Seatback Sub-assembly
Button)
5 - Front Passenger Seat Reclining Adjuster Handle 6 - Front Passenger Seat Outer Shield Assembly
7 - Front Passenger Seat Track End Cover 8 - Front Passenger Seat Belt Buckle
9 - Front Passenger Seat Inner Shield Assembly 10 - Front Passenger Seat Track Assembly
11 - Front Passenger Seat Track Unlock Handle 12 - Front Passenger Seat Cushion Sub-assembly
13 - Front Passenger Seat Belt Reminder

47–4 Chery Automobile Co., Ltd.

 47 - SEAT

Rear Seat Assembly

4 1

3 7
2

×2 8
5
×2

6
×2
10
×2

11
×4
12

13

RM16470003

1 - Rear Right Seat Headrest Assembly 2 - Rear Seat Headrest Guide (w/ Button)
3 - Rear Seat Headrest Guide (w/o Button) 4 - Rear Right Seat Handle Release Cover
5 - Rear Right Seat Protector Assembly 6 - Rear Right Seatback Assembly
47
7 - Rear Left Seat Headrest Assembly 8 - Rear Left Seat Handle Release Cover
9 - Rear Left Seatback Hook 10 - Rear Left Seatback Lock Bracket Cover
11 - Rear Left Seat Protector Assembly 12 - Rear Seatback Center Connecting Bracket
Assembly
13 - Rear Seat Cushion Assembly

Driver seat assembly (power seat) can be moved forward, backward, upward and downward by track
adjusting button, and seat reclining can be adjusted by reclining power button.
Front passenger seat assembly (manual seat) can be moved forward and backward by seat track unlock
handle, and seat reclining can be adjusted by seat reclining adjuster handle.
Rear seat position is not adjustable; however, the rear seatback can be folded forward by pulling seatback
unlock mechanism assembly, to help increase the storage space of luggage compartment.

Chery Automobile Co., Ltd. 47–5

 47 - SEAT

Specifications
Torque Specifications

Description Torque (N·m)

Front Seat Assembly Fixing Bolt 25 ± 3
Seat Track Unlock Handle Fixing Screw 3.5 ± 0.35
Seat Outer Shield Assembly Fixing Screw 3.5 ± 0.35
Seat Belt Buckle Assembly Fixing Bolt 50 ± 5
Seat Inner Shield Assembly Fixing Screw 3.5 ± 0.35
Rear Seatback Lock Bracket Cover Fixing Screw 3.5 ± 0.35
Rear Seat Center Connecting Bracket Assembly
25 ± 3
Fixing Bolt
Power Switch Box Fixing Screw 3.5 ± 0.35
Coupling Bolt Between Seatback Sub-assembly and
48 ± 4.8
Seat Cushion Sub-assembly
Rear Seat Protector Assembly Fixing Nut 3.5 ± 0.35

Tool
General Tool

Digital Multimeter

RCH0000002

47

47–6 Chery Automobile Co., Ltd.

 47 - SEAT

Circuit Diagram
Seat System

BATTERY

ENGINE
COMPARTMENT
EF02 FUSE AND
30A RELAY BOX (J)
B-023
J1

POSITION SEATBACK CUSHION

ADJUSTMENT ANGLE HEIGHT
SWITCH ADJUSTMENT ADJUSTMENT
SWITCH SWITCH
DRIVER SEAT
POWER
ADJUSTMENT
B-053

M M M
POSITION SEATBACK CUSHION
ADJUSTMENT ANGLE HEIGHT
MOTOR ADJUSTMENT ADJUSTMENT
MOTOR MOTOR

2
Br

B-052

2 1 47
J1 J2 4 3

B-053
B-023
Lg
Y

EM16470010

Chery Automobile Co., Ltd. 47–7

 47 - SEAT

DIAGNOSIS & TESTING

Problem Symptoms Table
HINT:
Use symptoms table below to help determine cause of problem. Check each suspected area in sequence.
Repair or adjust faulty components, or replace as necessary.

Symptom Suspected Area See page

Power seat switch 47-11
Only slide operation function does not
Slide motor 47-9
operate
Wire harness and connector -
Power seat switch 47-11
Only lifter operation function does not
Lifter motor 47-9
operate
Wire harness and connector -
Power seat switch 47-11
Only reclining function does not operate Reclining motor 47-9
Wire harness and connector -
Seat fuse 53-37
All functions do not operate Power seat switch 47-11
Wire harness and connector -

47

47–8 Chery Automobile Co., Ltd.

 47 - SEAT

ON-VEHICLE SERVICE
Driver Seat Assembly (Power Seat)
Removal

CAUTION

 Be sure to wear safety equipment to prevent accidents, when removing seat assembly.
 Try to prevent body paint surface and carpet from being scratched or damaged, when removing seat
assembly.

1. Turn off all electrical equipment and the ignition switch.

2. Remove the driver seat headrest assembly.
a. As shown in the illustration, press the release button
of seat headrest guide (w/ button), and remove the
driver seat headrest assembly.

RM16470010

3. Remove the driver seat assembly.

a. As shown in the illustration, push the seat track
adjusting power button backward and move the seat
assembly to the rearmost position.

RM16470020

47
b. Remove 2 fixing bolts (arrow) from the front side of
seat assembly.
(Tightening torque: 25 ± 3 N·m)

RM16470030

Chery Automobile Co., Ltd. 47–9

 47 - SEAT

c. As shown in the illustration, push the seat track

adjusting power button forward and move the seat
assembly to the foremost position.

RM16470021

d. Remove 2 fixing bolts (arrow) from the rear side of

seat assembly.
(Tightening torque: 25 ± 3 N·m)

RM16470050

e. Push the seat track adjusting power button to move seat assembly to mid-position. Also, operate the
seat reclining power button to move seatback to upright position.
f. Disconnect the negative battery cable.
g. Disconnect the wire harness connectors (arrow)
under the seat assembly, and remove the driver seat
assembly.

RM16470031

47

47–10 Chery Automobile Co., Ltd.

 47 - SEAT

Disassembly

CAUTION

 Be sure to wear safety equipment to prevent accidents, when disassembling seat assembly.

1. Remove the driver seat (power seat) track adjusting power button.
a. Using a screwdriver wrapped with protective tape, pry
and remove the power seat track adjusting power
button.

RM16470080

2. Remove the power seat reclining power button.

a. Using a screwdriver wrapped with protective tape, pry
and remove the power seat reclining power button.

RM16470081

3. Remove the lumbar support handle.

a. As shown in the illustration, use a screwdriver
wrapped with protective tape to pry out the clip and
remove the lumbar support handle.

47

RM16470082

Chery Automobile Co., Ltd. 47–11

 47 - SEAT

4. Remove the hooks connecting driver seatback sub-

assembly and seat cushion sub-assembly.

RM16470090

5. Remove the seat outer shield assembly.

a. Remove 2 fixing screws from seat outer shield
assembly, and disengage the claw from seat frame.
(Tightening torque: 3.5 ± 0.35 N·m)

RM16470100

b. Disconnect the power switch box connector (arrow)

and remove the shield.

RM16470110

6. Remove the power switch box.

a. Remove 2 fixing screws from power switch box.
(Tightening torque: 3.5 ± 0.35 N·m)
b. Remove the connector fixing clip, and remove the
47 power switch box from seat outer shield.

RM16470120

7. Remove the driver seat belt buckle assembly.

47–12 Chery Automobile Co., Ltd.

 47 - SEAT

a. Remove 2 wire harness fixing clips and connector

fixing clip from seat belt buckle under the seat.

RM16470130

b. Remove the wire harness fixing clip from the right side
of seat.
c. Remove the fixing bolt from seat belt buckle.
(Tightening torque: 50 ± 5 N·m)

RM16470140

8. Remove the seat inner shield assembly.

a. Remove 2 fixing screws from seat inner shield
assembly, and remove the seat inner shield assembly.
(Tightening torque: 3.5 ± 0.35 N·m)

RM16470150

9. Separate the seatback sub-assembly and seat cushion sub-assembly.

a. Disconnect 2 wire harness fixing clips and connector
fixing clip from seat airbag.
b. Disconnect the seatback motor wire harness
connector. 47

RM16470160

Chery Automobile Co., Ltd. 47–13

 47 - SEAT

c. Remove 4 coupling bolts between seatback sub-

assembly and seat cushion sub-assembly.
(Tightening torque: 48 ± 4.8 N·m)

RM16470170

10.Remove the driver seat headrest guide.

a. Remove 5 hog rings (arrow) from seatback 
sub-assembly.

RM16470180

b. Remove the plastic lining plate of seatback.

c. Press and hold the lower part of seat headrest guide
in the direction of arrow as shown in the illustration,
and remove the driver seat headrest guide.

47 RM16470190

Assembly
Assembly is in the reverse order of disassembly.

CAUTION

 Be sure to wear safety equipment to prevent accidents, when assembling seat.

 Be careful not to damage the seat cover when assembling seat.
 Replace damaged hog rings when assembling seat.
 Keep seat cover clean and tidy, and try to prevent wrinkles when assembling seat.

47–14 Chery Automobile Co., Ltd.

 47 - SEAT

Installation
Installation is in the reverse order of removal.

CAUTION

 Be sure to wear safety equipment to prevent accidents, when installing seat assembly.
 Be careful not to damage the body paint surface, when installing seat assembly.
 Try to prevent carpet from being scratched or damaged, when installing seat assembly.

Inspection
After completing the installation of seat assembly, check the basic functions of seat assembly, and confirm
that the following functions operate normally:
1. When sliding seat to the foremost and rearmost positions
by moving the seat track adjusting power button forward
and backward, check if the following malfunctions of seat
occur: heavy operation, high sliding resistance, seizuring,
noise and interference between seat shield and auxiliary
fascia console occurs, etc. If above conditions occur,
repair or replace in time.

RM16470191

2. Adjust the seat reclining to the maximum and minimum

angle by toggling the seat reclining power button upward
and downward, to check if seatback is heavily turned
over and stuck, etc. If above conditions occur, repair or
replace in time.

RM16470192

3. Adjust the seat to the highest and lowest position by

toggling the seat height adjusting switch upward and
downward, to check if the operation of seat is heavy and
stuck, etc. If above conditions occur, repair or replace in 47
time.

RM16470193

Chery Automobile Co., Ltd. 47–15

 47 - SEAT

4. Toggle the lumbar support handle upward and

downward, to check if the raising of seat is heavy and
stuck, etc. If above conditions occur, repair or replace in
time.

RM16470194

5. Move the seat headrest upward and downward by

pressing the release button of headrest guide (w/ button),
to check if the operation of seat headrest is heavy and
stuck, etc. If above conditions occur, repair or replace in
time.

RM16470010

47

47–16 Chery Automobile Co., Ltd.

 47 - SEAT

Front Passenger Seat Assembly (Manual Seat)

Removal

CAUTION

 Be sure to wear safety equipment to prevent accidents, when removing seat assembly.
 Try to prevent body paint surface and carpet from being scratched or damaged, when removing seat
assembly.

1. Turn off all electrical equipment and the ignition switch.

2. Disconnect the negative battery cable.
3. Remove the front passenger seat headrest assembly.
a. As shown in the illustration, press the release button
of seat headrest guide (w/ button), and remove the
front passenger seat headrest assembly.

RM16470040

4. Remove the front passenger seat assembly.

a. As shown in the illustration, pull up the seat track
unlock handle and move the seat assembly to the
rearmost position.

RM16470060

b. Remove 2 fixing bolts (arrow) from the front side of

seat assembly.
47
(Tightening torque: 25 ± 3 N·m)

RM16470061

Chery Automobile Co., Ltd. 47–17

 47 - SEAT

c. As shown in the illustration, pull up the seat track

unlock handle and move the seat assembly to the
foremost position.

RM16470062

d. Remove 2 fixing bolts (arrow) from the rear side of

seat assembly.
(Tightening torque: 25 ± 3 N·m)

RM16470070

e. Disconnect the wire harness connectors (arrow) and

connector fixing clips under seat assembly.

RM16470063

f. Pull up the seat track unlock handle to move seat assembly to mid-position. Also, operate the seat
reclining adjuster handle to move seatback to upright position, and remove the front passenger seat
assembly.

47

47–18 Chery Automobile Co., Ltd.

 47 - SEAT

Disassembly
1. Remove the front passenger seat track unlock handle.
a. Remove the fixing screw (arrow) from seat track
unlock handle, and remove the front passenger seat
track unlock handle.
(Tightening torque: 3.5 ± 0.35 N·m)

RM16470200

2. Remove the front passenger seat reclining adjuster handle.

a. Using a screwdriver wrapped with protective tape, pry
the seat reclining adjuster handle, disengage the clip
and remove the front passenger seat reclining
adjuster handle.

RM16470201

3. Disconnect the hooks connecting front passenger

seatback sub-assembly and seat cushion sub-assembly.

RM16470210

4. Remove the front passenger seat outer shield assembly.

a. Using a screwdriver wrapped with protective tape, pry
out the cover of screw (1) on outer shield. 47
b. Remove 3 fixing screws from seat outer shield
assembly, disengage the clip between outer shield
and seat frame, and remove the front passenger seat
outer shield.
(Tightening torque: 3.5 ± 0.35 N·m)

1
RM16470220

5. Remove the front passenger seat belt buckle assembly.

Chery Automobile Co., Ltd. 47–19

 47 - SEAT

a. Remove the connector fixing clip and 2 wire harness

fixing clips from seat belt buckle.

RM16470211

b. Remove the fixing bolt (arrow) from seat belt buckle

assembly and remove the front passenger seat belt
buckle assembly.
(Tightening torque: 50 ± 5 N·m)

RM16470230

6. Remove the front passenger seat inner shield assembly.

a. Remove 2 fixing screws from seat inner shield
assembly and separate the plastic hook.
(Tightening torque: 3.5 ± 0.35 N·m)

RM16470240

7. Separate the seatback sub-assembly and seat cushion sub-assembly.

a. Remove 2 wire harness clips and connector clip from
front passenger airbag.

47

RM16470212

47–20 Chery Automobile Co., Ltd.

 47 - SEAT

b. Remove 4 coupling bolts between seatback sub-

assembly and seat cushion sub-assembly.
(Tightening torque: 48 ± 4.8 N·m)

RM16470250

8. Remove the seat cushion sub-assembly.

a. Remove the connector fixing clip and 2 wire harness
clips (arrow) from front passenger seat belt reminder.

RM16470260

b. Remove 13 hog rings (arrow) from seat cushion 

sub-assembly and remove the front passenger seat
cushion sub-assembly.

RM16470261

9. Remove the front passenger seat belt reminder.

a. Remove 4 hog rings from seat cushion sub-assembly.
b. Remove the front passenger seat belt reminder.

47

RM16470270

10.Remove the front passenger seat headrest guide.

Chery Automobile Co., Ltd. 47–21

 47 - SEAT

a. Remove 5 hog rings (arrow) from seatback sub-

assembly.

RM16470180

b. Remove the plastic lining plate of seatback.

c. Press and hold the lower part of seat headrest guide
in the direction of arrow as shown in the illustration,
and remove the front passenger seat headrest guide.

RM16470280

Assembly
Assembly is in the reverse order of disassembly.

CAUTION

 Be sure to wear safety equipment to prevent accidents, when assembling seat.

 Be careful not to damage the seat cover when assembling seat.
 Replace damaged hog rings when assembling seat.
 Keep seat cover clean and tidy, and try to prevent wrinkles when assembling seat.

47
Installation
Installation is in the reverse order of removal.

CAUTION

 Be sure to wear safety equipment to prevent accidents, when installing seat assembly.
 Be careful not to damage the body paint surface, when installing seat assembly.
 Try to prevent carpet from being scratched or damaged, when installing seat assembly.

47–22 Chery Automobile Co., Ltd.

 47 - SEAT

Inspection
After completing the installation of seat assembly, check the basic functions of seat assembly, and confirm
that the following functions operate normally:
1. When sliding seat to the foremost and rearmost positions
by pulling up the seat track unlock handle, check if the
following malfunctions of seat occur: heavy operation,
high sliding resistance, seizuring, noise and interference
between seat shield and auxiliary fascia console occurs,
etc. If above conditions occur, repair or replace in time.

RM16470290

2. Adjust the seat reclining to the maximum and minimum

angle by pulling up the seat reclining adjuster handle, to
check if seatback is heavily turned over and stuck, etc. If
above conditions occur, repair or replace in time.

RM16470291

3. Move the seat headrest upward and downward by

pressing the release button of headrest guide (w/ button),
to check if the operation of seat headrest is heavy and
stuck, etc. If above conditions occur, repair or replace in
time.

RM16470292

4. Check if fixing bolts are set in position, and tighten them to the specified torque.
5. Check the front passenger seat belt reminder.
a. Disconnect the front passenger seat belt reminder 47
connector (arrow).

RM16470293

Chery Automobile Co., Ltd. 47–23

 47 - SEAT

b. Measure the resistance of front passenger seat belt

reminder with a digital multimeter according to the
+ -
value(s) in the table below.
1 2
Multimeter Measurement Specified
Connection Condition Condition
Terminal 1 -
Seat not occupied ∞Ω
Terminal 2
Terminal 1 -
Seat occupied ≤ 20 Ω
Terminal 2 RM16470294

If result is not as specified, replace the front passenger

seat belt reminder.

47

47–24 Chery Automobile Co., Ltd.

 47 - SEAT

Rear Seat Assembly

Removal

CAUTION

 Be sure to wear safety equipment to prevent accidents, when removing rear seat assembly.
 Try to prevent body paint surface and carpet from being scratched or damaged, when removing rear seat
assembly.

1. Remove the rear seat headrest assembly.

a. Press the handle release cover, adjust the seatback
and press the headrest release button to remove the
rear seat headrest assembly as shown in the
illustration.

RM16470300

2. Remove the rear seat cushion assembly.

CAUTION

 Try to prevent rear seat cushion frame from being deformed, when removing rear seat cushion.

a. As shown in the illustration, put your hands near the

"U" wire on one side of rear seat cushion assembly,
and then raise the rear seat cushion assembly to
separate U wire and holder assembly. 
Use the same procedure for the other side.

47

RM16470310

Chery Automobile Co., Ltd. 47–25

 47 - SEAT

b. As shown in the illustration, disengage "n" wire in rear

part of cushion from Ω bracket raised out of body floor.

RM16470311

c. Remove the rear seat cushion assembly.

3. Remove the rear seat protector assembly.
a. Remove the fixing nut from rear left seat protector
assembly and disengage the plastic hook from the
upper part of left protector.
(Tightening torque: 3.5 ± 0.35 N·m)

RM16470320

b. Remove the rear left seat protector assembly.

Use above procedures to remove the right protector assembly.
4. Remove the rear seatback assembly.
a. Put down the rear seatback, open the luggage compartment door, pull apart the adhesive strips and
remove the luggage compartment carpet assembly.
b. Remove 4 fixing bolts from rear seatback center
connecting bracket assembly.
(Tightening torque: 25 ± 3 N·m)

47 RM16470330

c. Remove the fixing nut (arrow) from rear left seatback

positioning holder and remove the rear left seatback
positioning holder (1).
(Tightening torque: 25 ± 3 N·m)
Use above procedures to remove the rear right
seatback positioning holder.
1

RM16470340

47–26 Chery Automobile Co., Ltd.

 47 - SEAT

d. Press the handle release cover, turn over the

seatback and remove the rear left seatback.
Use above procedures to remove the rear right
seatback.

RM16470341

CAUTION

 Try to prevent body paint surface and carpet from being scratched or damaged, when removing rear seat
assembly.

Disassembly
HINT:
 Use same procedures for rear left seat assembly and rear right seat assembly.
 Procedures listed below are for rear right seat assembly.

CAUTION

 Be sure to wear safety equipment to prevent accidents, when disassembling rear seat assembly.

1. Remove the rear right seat headrest guide.

a. Pull apart the adhesive strips, and remove 14 hog
rings from the back side of seatback.

RM16470350
47

Chery Automobile Co., Ltd. 47–27

 47 - SEAT

b. Press and hold the lower part of rear seat headrest

guide indicated by the arrow shown in the illustration,
and remove the rear right seat headrest guide.

RM16470360

2. Remove the rear seatback release handle cover.

a. Using a screwdriver wrapped with protective tape, pry
up the claws on rear right seatback release handle
cover, and remove the release handle cover.

RM16470361

3. Remove the seatback lock bracket cover.

a. Remove 2 fixing screws from rear right seatback
bracket cover.
b. Separate the claw (1) and remove the seatback lock
bracket cover.

47 RM16470370

Assembly
Assembly is in the reverse order of disassembly.

CAUTION

 Be sure to wear safety equipment to prevent accidents, when assembling rear seat assembly.
 Be careful not to damage the seat cover, when assembling rear seat assembly.
 Replace damaged hog rings, when assembling rear seat assembly.
 Keep seat cover clean and tidy, and try to prevent wrinkles, when assembling rear seat assembly.

47–28 Chery Automobile Co., Ltd.

 47 - SEAT

Installation
Installation is in the reverse order of removal.

CAUTION

 Be sure to wear safety equipment to prevent accidents, when installing rear seat assembly.
 Be careful not to damage the body paint surface, when installing rear seat assembly.
 Try to prevent carpet from being scratched or damaged, when installing rear seat assembly.
 When installing rear seat cushion, make sure that seat belt buckle is not under the seat cushion.

Inspection
After installing the rear seat assembly, check the basic functions of rear seat assembly, and confirm that the
following functions operate normally:
1. Pull up the seatback release handle cover, to check if
rear seatback is heavily turned over and stuck, etc.
Repair or replace as necessary.

RM16470380

2. Move the seat headrest upward and downward by

pressing the release button of headrest guide (w/ button),
to check if the operation of seat headrest is heavy and
stuck, etc. If above conditions occur, repair or replace in
time.

RM16470300

3. Check if fixing bolts are set in position, and tighten them to the specified torque.
4. Check if rear seatback is locked securely. 47
HINT:
If the red warning mark on rear seatback release handle is visible, it indicates that the seatback does not
lock.
5. Check if side protectors and cushion are installed securely.

Chery Automobile Co., Ltd. 47–29

- MEMO -

47–30 Chery Automobile Co., Ltd.