Remote Sensor Series
Description
Operation mode and max sensing range: Thru beam: Dependant on amplifier Diffuse proximity: Dependant on amplifier Optional sensor monitor LED Wide variety of housings High tolerance to hostile environments Cable or plug connections
The remote sensor series, which consists of a transmitter LT and receiver LR, is made to operate in conjunction with a Telco photoelectric amplifier from the PA or MPA programmes. The remote sensors are available in a wide range of housings, with either cable or plug connection, and may be used in thru beam or diffuse proximity mode.
The series is available with optional power-(LR) and output-(LT) monitor LEDs for use with any Telco photoelectric amplifier which has the sensor LED drive feature incorporated.
Technical Data
LT Transmitter Diode Photo Transistor Cable 4mm PVC Sleeves Min. cable bending radius Ga Al As, (880 nm) 2 x 0,25 mm2 45 mm LR Silicon NPN 1 x 0,25 mm2 + shield
Environmental Data
Vibration Shock Light immunity, @ 20 incidence 101 Series 100 Series 110/120 Series 10 55 Hz, 0,5 mm 30 g >50 000 lux >80 000 lux >100 000 lux 25 to +65 C 40 to +80 C IP 67 a
Temperature, operation Temperature, storage Sealing Class Approvals
Remote Sensor Series
Available Types
Series Optical Angle Connection Housing Material Polycarbonate Housing Size 10 LT 101 AP25 5 LT 101 TP25 5 Nickel Plated Brass +/ 8 Stainless Steel Polyester ABS 9,5 x 11,5 12,7
(Snap Housing)
5 m Cable
15 m Cable
3 pin, M8 Plug
4 pin, M12 Plug
Order Reference LT 101 AP25 15 LT 101 TP25 15 LT 101 TB25 15 LT 101 TS25 15 LT 101 SG 15* LT 101 S22 15* LR 101 AP25 15 LR 101 TP25 15 LR 101 TB25 15 LR 101 TS25 15 LR 101 SG 15* LR 101 S22 15* LT 101 AP25 T3 LT 101 TP25 T3 LT 101 TB25 T3 LT 101 TS25 T3 LT 101 SG T3 LR 101 AP25 T3 LR 101 TP25 T3 LR 101 TB25 T3 LR 101 TS25 T3 LR 101 SG T3
Transmitter
M12 x 1
LT 101 TB25 5 LT 101 TS25 5 LT 101 SG 5* LT 101 S22 5* LR 101 AP25 5 LR 101 TP25 5
101
Polycarbonate
10
Receiver
Nickel Plated Brass +/ 9 Stainless Steel Polyester ABS
M12 x 1
LR 101 TB25 5 LR 101 TS25 5
9,5 x 11,5 12,7
(Snap Housing)
LR 101 SG 5* LR 101 S22 5*
Transmitter
Polycarbonate +/ 6 Nickel Plated Brass
10
LT 100 AP38 5 LT 100 TP38 5
LT 100 AP38 15 LT 100 TP38 15 LT 100 TB38 15 LT 100 TS38 15 LR 100 AP38 15 LR 100 TP38 15 LR 100 TB38 15 LR 100 TS38 15
LT 100 AP38 T3 LT 100 TP38 T3 LT 100 TB38 T3 LT 100 TS38 T3 LR 100 AP38 T3 LR 100 TP38 T3 LR 100 TB38 T3 LR 100 TS38 T3
LT 100 TB58 J LT 100 TS58 J LR 100 TB58 J LR 100 TS58 J
M12 x 1
LT 100 TB38 5 LT 100 TS38 5
100 Receiver
+/ 9
Stainless Steel Polycarbonate Nickel Plated Brass Stainless Steel 10
LR 100 AP38 5 LR 100 TP38 5
M12 x 1
LR 100 TB38 5 LR 100 TS38 5
Transmitter
Polycarbonate +/ 8 Nickel Plated Brass
10
LT 110 AP38 5 LT 110 TP38 5
LT 110 AP38 15 LT 110 TP38 15 LT 110 TB38 15 LT 110 TS38 15 LR 110 AP38 15 LR 110 TP38 15 LR 110 TB38 15 LR 110 TS38 15
LT 110 AP38 T3 LT 110 TP38 T3 LT 110 TB38 T3 LT 110 TS38 T3 LR 110 AP38 T3 LR 110 TP38 T3 LR 110 TB38 T3 LR 110 TS38 T3
LT 110 TB58 J LT 110 TS58 J LR 110 TB58 J LR 110 TS58 J
M12 x 1
LT 110 TB38 5 LT 110 TS38 5
110 Receiver
+/ 3
Stainless Steel Polycarbonate Nickel Plated Brass Stainless Steel 10
LR 110 AP38 5 LR 110 TP38 5
M12 x 1
LR 110 TB38 5 LR 110 TS38 5
Transmitter
+/ 4
LT 120 TB45 5
LT 120 TB45 15
120 Receiver
+/ 2,5
Nickel Plated Brass
M18 x 1 LR 120 TB45 5 LR 120 TB45 15
Note: If the applicable amplifier has sensor LED-drive, add L after the series number for sensor monitor LED eg. LT/LR 101L AP25 5. Sensors marked * do not have this optional feature. Photo amplifiers to be ordered separately.
Remote Sensor Series
Applicable Photoelectric Amplifiers and Ranges
Photoelectric Amplifiers Series Operation Modes Thru-beam Diffuse Proximity Thru-beam Diffuse Proximity Thru-beam Diffuse Proximity Thru-beam Diffuse Proximity PA 01 8m 65 cm 10 m 75 cm 23 m 1,6 m 45 m 3,5 m PA 09 A 5m 45 cm 11 m 90 cm PA 10 B 15 m 1,1 m 35 m 2m 60 m 4m 18 m 1,1 m 40 m 2m 70 m 5m 10 m 75 cm 25 m 1,6 m 45 m 3,5 m PA 11 MPA 21 A/B 8m 65 cm 18 m 1,3 m 35 m 3m MPA 41 C/D 4m 35 cm 9m 70 cm 18 m 2m A/B 8m 65 cm 18 m 1,3 m 35 m 3m MPA 81 C/D 4m 35 cm 9m 70 cm 18 m 2m
101 100 110 120
Note: For ranges using fibre optics, please refer to page 45.
Connections
Cable Transmitter Signal Transmitter Ground Receiver Signal Receiver Ground 3 pin, M8 Sensor Plug (Male)
4 1 3 3
M8 Plug/Cable Pin 1/Brown Pin 3/Blue Pin 4/Black Pin 3/Blue 4 pin, M12 Sensor Plug (Male) Cable Plug (Female)
M12 Plug/Cable Pin 1/Brown Pin 3/Blue Pin 4/Black Pin 3/Blue
Red Black Yellow Shield
Cable Plug (Female) Black
4 1
Brown
1 2 3 4 4 3 1 2
Brown Blue
White Blue Black
Dimensions and Descriptions
Series 101
28,5 10 M12 x 1 25 17 3 10 8,7 LED 28,5 25 14
5 LED 16 16
10 8,7
AP25 5/15
TP/TB/TS25 5/15
36 41 60 3,5 9 60 3,5 41 9
36 10 25 LED 17 M8 x 1 M12 x 1
25 14
M8 x 1 LED
15
15 7 LED M8 x 1
AP25 T3
TP/TB/TS25 T3
22
SG 5/15
SG T3
15,5
17,5 S22 5/15
(Units in mm)
Remote Sensor Series
Dimensions and Descriptions
Series 100/110
41,5 10 M12 x 1 38 17 17 3 3 LED LED 41,5 38 26 58 38 LED M12 x 1 M12 x 1
AP38 5/15
TB/TS58 J
TP/TB/TS38 5/15
49 49 38 26 10 38 LED 17 3 LED M8 x 1 M12 x 1 M8 x 1
AP38 T3 TP/TB/TS38 T3 (Units in mm)
Series 120
55 45 28 LED
M18 x 1
24
TB45 5/15 (Units in mm)
Telco reserves the right to change specifications without notice.
