At a Glance
Bass Indicator Bluetooth Indicator
Bass Indicator Color: White Bluetooth Indicator Color: Blue / White
Bass Button Power Button / Power Indicator
Volume Down Button Power Indicator Color: Red / White
Multi-function Button USB Type C Port
Volume Up + Button 3.5mm Audio Input Port
Bluetooth Button
Using Your Soundcore Motion+
1. Turn On / Off
ON Press once
OFF Press and hold for 2 seconds
Soundcore Motion+ is equipped with High-Resolution Audio. This specialty gives the speaker a better sound quality by referring to digital processes that allow
playback of music using higher sampling rates.
Note: Soundcore Motion+ supports Qualcomm® aptX™.
a. Bluetooth mode
Bluetooth Pairing Mode
Slowly Flashing Blue (Fade in and
Note: starts to connect to previous connected mobile device when
out)
speaker is turned on.
Solid Blue Connected to a device
Enter True Wireless Stereo Group Mode / Disconnect True Wireless Stereo
Slowly True Wireless Stereo Group Mode
Solid White (Secondary speaker)
Connected to True Wireless Stereo
Solid Blue（Primary speaker)
With True Wireless Stereo technology, you can pair your Soundcore Motion+ with another Soundcore Motion+ to explore the best sound effects
with left and right sound channels separated on both speakers.
Music
Play / Pause
Play Next Song
Play Previous Song
Press to turn Bass on
Press once to activate bass
Note: Press again to switch back to Normal Equalizer
Activate Siri / Other Voice Control Software
Volume Up / Down
Mobile phone
Answer Call / End Call
Reject Call / Switch between a call on hold and an active call
End current call and answer incoming call / End current call and switch to call on hold
Switch audio source between Speaker and Phone
Solid Blue On a Call
Flashing Blue Incoming Call
When turned on, Soundcore Motion+ will automatically connect to the last connected device if available. If not, press the Bluetooth button to
activate pairing mode.
To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps.
Having connection problems? Remove Soundcore Motion+ from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try
pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.
b. AUX-In mode
Plugging in an audio cable will automatically switch to AUX mode.
When using AUX mode, control audio playback via the connected device.
Charging your Soundcore Motion+
Slowly Flashing Red Low Battery
Solid Red Charging
Off Fully Charged
Use the included USB cable to charge your Soundcore Motion+ and make sure it is fully charged before its first use.
USB type C cable only supports charge in, it does not support charge out.
Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.
When not in use, store your speaker in a cool place.
Specifications
Specifications are subject to change without notice.
Input: 5 V 2 A
Audio output: 30 W
Battery capacity : max.6700mAh
Charging time : Approximately 4 hours(When power is off and the adapter must be at least 5V/2A)
Playtime (varies by volume level and music content): 12 hours
Size: 257 x 79 x 81 mm / 10.1 x 3.1 x 3.2 inch
Weight (without packaging): 1050 g / 37 oz
Bluetooth version: V 5.0
Bluetooth range: 30m/99ft
Sound Frequency Range: 50Hz~40kHz
soundcore APP
Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.
Variable 'x' Range of variable Content
Denotes the hardware version which is not effected on the
Eighth 0-9 or A-F
safety compliance.
Denotes the year, 8 means 2018, 9 means 2019, A means 2020,
Ninth 8,9,A,B,C...
B means 2021, C means 2022, and so on.
Denotes weeks, 01 means the first week in this year, 02 means
Tenth and Eleventh 01,02,03...
the secondary week in this year, and so on.
Denotes date, 1 means Monday, 2 means Tuesday..., 7 means
Twelfth 1-7
Sunday and so on.
The last five 00001-99999 Denotes serial No.
Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and
Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023.
For the Statement of Compliance, visit the website:
https://uk.soundcore.com/pages/psti-related.
