62
ACRYLIC
SCRATCH
TEXTURE
Exterior
Water resistance (Waterproofing test: SS 500) - Tough
textured film protects walls from water penetrating inside.
HAISHA Paints Acrylic
Scratch Texture is a Excellent Surface Adhesion (Dry & Wet Adhesion test: ASTM
D 4541) - Provide excellent adhesion to the plaster surfaces.
BENEFITS
trowel applied texture Hide Cracks – It hides surface undulation and fine
finish available in surface cracks.
different granule sizes of All weather durability – Tough texture film protects from
2mm and 3 mm. It is humidity, rain and variable climate conditions when applied
as a system with recommended topcoat.
formulated with modified PRODUCT FEATURES
acrylic emulsion,
reinforced with crushed PACKS PATTERN
and precisely graded CROSS SWIRL SCRATCH
SWIRL
25 KG POLYSAG
fillers to provide superior
exterior durability.
FINISH
Availability in different Shelf life: 6 months from the date of manufacturing in unopened
granule sizes makes it TEXTURED, MATT bag. Away from direct sunlight & stored in cool and dry place.
suitable for a variety of COVERAGE AREAS OF APPLICATION
creative designs for both Fine (1 mm +) – 3.0 to 3.5 Sq. Ft./Kg / per coat* Smooth plastered wall,
smooth and rough Medium (2 mm +) - 2.5 to 3.0 Sq. Ft./Kg / Per coat* Pre-cast concrete surface,
Coarser (3 mm +) - 1.5 to 2.2 Sq. Ft./Kg / Per Coat*
surfaces for Exterior and ** Actual coverage and drying time may vary from the quoted
rendered surface etc. for
both Interior and Exterior
Interior surfaces. coverage due to factors such as Surface condition
(rough/smooth), method of application and environmental Surfaces.
condition.
1) SURFACE PREPARATION: 2) APPLICATION PROCESS:
▪ New plaster or masonry surfaces must be allowed to cure a) For New Plaster Surface
(28 days) before application. Cured plaster should be hard ▪ Primer is optional for new plastered surfaces. Dr. Fixit Primo White/Dr. Fixit
(non-powdery) and in sound condition. Waterproof Coating/Dr. Fixit Raincoat Basecoat are the suggested primers
▪ Clean the surface with stiff nylon, wire brushing followed by for better adhesion and is to be used in a 2:1 ratio with water (2 parts
high pressure water jet cleaning. Algae and fungus on the primer/ basecoat mixed with 1 part water). Allow it to dry for 4-6 hours*.
wall to be removed, by using high-pressure wash (160 bar ▪ Mix HAISHA PAINTS Acrylic Scratch texture thoroughly. No dilution is
pressure) or coir brush and shall be treated with fungicidal recommended but in case of application difficulty add up to 200 ml water per
solution. bag and mix well.
▪ All cracks up to 3 mm in width should be opened up 5 mm ▪ Apply a one of coat Texture using a steel trowel. Ensure deposition of 1-2
making the V groove and fill with Dr. Fixit Crack X Paste. mm thickness for Scratch Texture of 2 mm and 2-3 mm for Scratch Texture
Apply the primer coat prepared with Dr. Fixit Crack-X Paste of 3 mm. Allow the texture to set for 5-10 minutes*.
and water in 1:1 proportion over the crack surface. Fill ▪ Use plastic trowel and move in different directions to create the desired
cracks with Dr. Fixit Crack-X Paste when the surface is pattern (Vertical/Cross/Swirl/Rainfall). Allow it to dry for 12-14 hours*.
tacky and not dried completely. ▪ Apply Dr. Fixit Raincoat range of coating as a topcoat in the desired shade
▪ For cracks larger than 5 mm and separation gaps, use as per recommended application system.
polymer-modified mortar (PMM) mixed with Dr. Fixit b) For Repainting Surface
Pidicrete URP 10% by weight of cement after making the V
▪ Clean the surface to remove loose, chalky substances and apply a Dr. Fixit
groove or by Dr. Fixit Polymer Modified Mortar HB.
Primo White/ Dr. Fixit Waterproof Coating/Dr. Fixit Basecoat used in a 2:1
▪ In case there are structural cracks, please study and repair
ratio with water (2 parts primer/ basecoat mixed with 1 part water). Allow it
them with a structural engineer.
to dry for 4-6 hours*.
▪ Rough plaster needs to be smoothened out by using a
▪ Mix HAISHA PAINTS Acrylic Scratch texture thoroughly. No dilution is
grinding machine.
recommended but in case of application difficulty add up to 200 ml water
▪ Avoid using texture on highly undulated surfaces. per bag and mix well.
▪ Apply a one of coat Texture using a steel trowel. Ensure deposition of 1-2
mm thickness for Scratch Texture of 2 mm and 2-3 mm for Scratch Texture
of 3 mm. Allow the texture to set for 5-10 minutes*.
▪ Use plastic trowel and move in different directions to create the desired
pattern (Vertical/Cross/Swirl/Rainfall). Allow it to dry for 12-14 hours*.
▪ Apply Dr. Fixit Raincoat range of coating as a topcoat in the desired shade
as per recommended application system.
* Recoating period is quoted for Temp. 250C and Humidity 50%, these may vary under different conditions.
* Some shade may require an additional coat of Topcoat for proper hiding.
62
ACRYLIC
SCRATCH
TEXTURE
Exterior
HOW TO CHOOSE COLORS ADDITIONAL INFO
Post painting care ▪ Do not apply paint on high alkaline
• For the best performance of the surface (pH of the wall to be
paint, ensure proper cleaning of all below 12).
+ algal and fungal growth, if any, at ▪ Pre-wet the surface before application
regular intervals of 6 months. of HAISHA Paints Acrylic Scratch
Texture.
• Ensure there is no stagnant water ▪ Tightly close the bag when not in use
at any point on any surface. and store in a cool, dry place.
Precautions ▪ Use of Universal Stainers or
HAISHA Paints Acrylic Scratch Texture should be colourants is not recommended.
top-coated with Dr. Fixit Coating or HAISHA
▪ Stir and mix well before use.
Paints Wall Emulsion. Use the HAISHA Paints ▪ Avoid over deposition of material to ▪ Open bag needs to be used within
Fandeck or Dr. Fixit Fandeck to select the right ensue visibility of texture pattern. 12 hours.
shade. ▪ Do not apply when an ambient ▪ Thinning is not advisable.
temperature is below 100C or above
450C or if humidity is >90%.
TECHNICAL DETAILS SAFETY FEATURES
1 2
DRYING TIME RECOAT PERIOD
Kindly refer to the MSDS for HAISHA
Paints Acrylic Scratch Texture which
gives detailed information on safety
measures while handling the paint,
30 to 45 minutes for 12 to 14 hours which is available on request.
surface dry
Store the Bag/container in well ambient
condition and away from sources of
3 4 ignition and fireplaces.
POT LIFE COLOUR
Keep out of reach of children and away
from eatables.
12 hours Off-White Wear eye protection during application.
In case of contact with eyes, rinse
immediately with plenty of water and
seek medical advice.
5 6
APPEARANCE METHOD OF APPLICATION In case of skin contact wash the skin
with soap and plenty of water. Get
medical attention if irritation develops
or persists.
Thixotropic Trowel (plastic/Steel)
Do not breathe vapor or spray. It is
recommended to wear a suitable nose
mask during sanding and surface
7 8 preparation to avoid dust inhalation.
FLASH POINT SPECIFIC GRAVITY
Do not pour leftover paint down the
drain or in water courses.
Non-Flammable 2.00 +-0.2 No added lead, Mercury, or Chromium
compound.
Pidilite Industries Limited, Ramkrishna Mandir Road, Post Box no. 17411, Andheri (e) Mumbai 400059 India
Tel 18002666066 • fax +91-22-2835 7008 • website : www.haishapaints.com • e-mail : csc@pidilite.com • toll free no. 1800 22 5502
DISCLAIMER : WHILE THE COMPANY GUARANTEES ITS PRODUCTS AGAINST DEFECTIVE MATERIALS, THE USE AND APPLICATION OF THESE PRODUCTS ARE MADE WITHOUT GUARANTEE
SINCE THE CONDITIONS OF THEIR APPLICATION ARE BEYOND ITS CONTROL. IT IS RECOMMENDED TO VERIFY WITH THE COMPANY THAT THE PRODUCT IS SUITABLE FOR THE INTENDED USE,
AND THAT THIS DATA SHEET VERSION IS THE LATEST ONE. THE COMPANY MAY MODIFY IT WITHOUT PRIOR NOTICE. TECHNICAL CHARACTERISTICS ARE LISTED FOR GUIDANCE ONLY. FOR
MORE INFORMATION, PLEASE CONTACT THE COMPANY OFFICE IN YOUR LOCATION.
