Scribd
Upload
63 views2 pages

A2z A61-Service-1

The document provides detailed specifications for fuel injection equipment used in International Tractors Limited's 3100 NM engine model. It includes information on engine features, pump assembly, governor, injector, and other components, along with their respective part numbers and performance metrics. Additionally, it offers contact information for technical support and references a test chart for further details.

Uploaded by

محمد البلالي
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views2 pages

A2z A61-Service-1

The document provides detailed specifications for fuel injection equipment used in International Tractors Limited's 3100 NM engine model. It includes information on engine features, pump assembly, governor, injector, and other components, along with their respective part numbers and performance metrics. Additionally, it offers contact information for technical support and references a test chart for further details.

Uploaded by

محمد البلالي
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Automotive Aftermarket

TSS-SI-ITL-086

Fuel injection equipment for International Tractors Limited


Customer : International Tractors Limited
Application : Tractor; BS(TREM) III A
Engine details
Engine model : 3100 NM
Aspiration: Natural, Cooling : Water cooled;
Features : Firing Order 1-3-2 (Clockwise)
Power : 29.97kW (37.5hp) @ 1800rpm
Bore x Stroke : Ø100 x 118mm
Total Swept volume : 926 cc/cyl,
Compression ratio : 18:1,
Injection timing : 8 ± 2° BTDC
High pressure pipe : OD: 6mm ID: 1.8 Length: 500mm
Details of fuel injection equipment
Pump assembly : F002A2ZA61 (E 040 3403 00)
Pump : F002A14113 (PES 3A 85D 320 RS 2000)
Governor : F002A24534 (RSV400…900A5C1970R)
Feed pump : F 002 A50 040 (FP/KSG 22 AD 105)
Injector : F 002 C7Z 252
Nozzle holder : F 002 C70 552 (KBAL 90 P 94)
Nozzle : F 002 C40 624 ( DSLA 148 P 1549)
Sealing washer : 2 430 105 009 (1.5 mm thick)
Opening pressure : 250-258 bar (Factory setting)
(using new NH/NH spring and for resetting) 247-261 bar (Over Checking)
Allowable drop in opening pressure: 15% bar (should not be declared as defective when
when referred under warranty)
F 002 H20 109 (0.5 lts dual bowl, 70%
Filter : efficiency for 3-5 microns at 120Lph)
Pump F002A14113 has the following
features:
Pump housing : F 002 A10 805
Element : F 002 B10 639
Delivery Valve : 9 411 038 529
DV holder : 1 413 372 090
Camshaft : F 002 A11 137
Overflow valve : F 002 A10 627
Governor F002 A24 534 is having the
following features:
Governor housing : F 002 A20 951

Governor cover : F 002 A25 468


Governor spring : 1 424 627 002
Introduction: 30.11.2018
1. Technical hotline - 1800 108 1081
mailbox2service@bosch.in.com
In case of any query, contact :
2. Sahadev S Nayak
sahadevsurendra.nayak@in.bosch.com
Refer to test chart : TSS_TS_ITL_F.A61

You might also like