nt : Arvind kumar choudhary

Ext : ssgadkar

Type of fuel injection system

Viscosity index
Axial movement dampers
Top bracing
Expansion arrangement in shell and tube heat Changer
Purifier bowl height how to measure & adjustment
Prepare ur boiler for survey
Clover leafing

Power balancing of main engine

Pmax measurement
Foundation bolt tightness check
Measurement of Fuel pump lead
Crosshead bearing all clearances and position to take
Additive of crankcase LO
Locking of rudder in particular position
Unit cut out of ME

Ext shirish sir

Int chaudhary sir
Mep

1.oil hotwell 1st action

He want to listen felt filter se absorb krna hai.
Steam trap wghra kuch b nai sunna
2.Purifier not picking rpm
3.tc water wash of gen
4.greasing of pp .how u ll guide ur tme
3 more i forgot
Thnx everyone posting que helps a lot

Ext sanjeeb
Int.shrish
Fun 4
1.alpha lubrication
2.tev working
3.indicator diagram
4.boiler acculation pr test
5.bumping clearance of air compressor
6.what is classification rule for having 2 air bottle
7.crankcase explosion safety
8.how you check starting aur valve is not working
Parveen Nair
Int - chandrashekhar
Fn 4
Type of vessel sailed ,
Specifications
Difference between me and ae construction
Lubrication in 4 stroke engine
Crankcase inspection
Fn 6
Tanker vessel done type of pump ,
Framo , working of framo , how cargo pump on tank work,
Ig system , alarms and trips , O2 content , what happen when igg go more than 8%,
what happen to cargo discharging,
Cargo tank pressure low what will happen , what other safties
Can't answer but he wanted to know about lel alarm I think

nternal: Praveen Nair sir

Ext: chandrashekhar sir
Fn: 4b 2nd attempt
1.What type of ships done and type of engines and generator.
2.CFPP in VLSFO what to do to rectify this problem and arrangements provided
3.Difference in 2s and 4s engine f.o , l.o sysytem and components and cross
questions.
4.AE decarb carried out by shore staff what all you will check as 2nd engineer
before starting.
5.Boiler safeties and cold firing process
Few questions more
Coc !! Finally 🍺
Saare bhaiyon ko dhanyawaad dil se aur aap logg bhi jaldi COC nikaloge my best
wishes 💞engineers zindabaad

7 June 2023

Internal: AK Choudhary
External: Gadkar

Function 4b
Dezincification
Thrust bearing clearance
Fuel pump timing, lead and zero setting
Relief valve and safety valve difference, what is blowdown and how to adjust
Piston stuck while removing, what will you do as 2E

Function 6

Foaming and Priming, why it happens, how to avoid?

Boiler water test with limit
Power Balancing
Conditions for running inn
Undersize Bearing
A few more

Result: Motor Pass, MEP Fail

xt vishwanathan sir , mmd noida

Function 4b
Main engine and AE specs
Difference between system oil of AE and ME,
Bottom end bearing, lubrication ot main engine,
Why butterfly valve in jcw inlet of main engine,
Boiler working pressure safety valve setting and design pressure, type of bouler ,
Compressor capacity.
Back pressure valve related qiastions,
Steering gear system , how oil is not going to rhe standby pump
Edit ; how cam shaft connected to crankshaft in AE, how many gears , type of gear

Int Chaki sir , mmd noida

Function 4b
Types of ship sailed(container)
Types of engine done(Rt-Flex)
1.Explain Common Rail system
How injections is taking place when engine is started.
2. Delta tuning
3. Fuel injection at higher and lower rpm
4. Sterntube Air gaurd system
5. Types of safety valve
6. Types of burner and turndown ratio. Which one has highest turn down ratio.

27.06.2023
Int-Praveen Nair Sir
Ext-Bijoy Yadav Sir

FN5
1. What type of alternator you worked on? What was Power Factor? What does
lagging and leading power factor signify?
2. Difference bw contactor and relay?
3. Difference bw Exd & Exi?
4. What do you mean by Class F insulation?
5. What do you mean by doping of semiconductor? How would you do?

FN6
1. What is 3G and 4G welding?
2. What is cold and hot corrosion?
3. How would you inspect rudder in drydock? What instrument is used for
measuring rudder drop?
4. What is ductile to brittle fracture transition? At What temp. it occurs?
5. What is induction Hardening?

MMD Noida
28-Jun-2023

Internal - Aurbind Kumar Choudhary

External - SS Gadkar

Function 4 and 5

Function 4-
-crankcase lub oil properties
-lub oil additives
-viscosity index
-fuel pump lead and how to measure ,and it’s significance
-what is a back pressure valve
-Marpol sample - give all details
-where is shroud fitted in turbocharger

Function 5
-what is power factor
-alternator maintenance
-as 2/E how to prepare for electrical survey
-type of cable from alternator to acb
-type of power cables
Some more questions can’t remember

Result: pass in both

Fn 4b
Power card Nd effect of choked scavenging ports
Crank case relief door construction nd lifting pressure
Cascade tank internal construction
Few more i forgot

Fn5

Iccp explain full

Electrical survey in control room preparation
Alternator maintenance
Reverse power trip working nd limit
Synchro scope construction nd working
Few more
Fnx4b
Pakrasi sir and shrish sir -

Explain iron carbon diag, why iron allotropic, perlite, cementite, eutectic, temp of
eutectic, where perlite used onboard.

All efficiencies and powers in engine

Governor types, explain sensitivity, main engine governor limiters

Boiler type, explain caustic embrittlement

Lubrication, striback curve

One more I cant remember

Coc, all credit to you all, mohit kumar ji posted all questions, do it and you will pass
I guess.

Date-28/06/2023
First Attempt:
Internal-Chakki Sir

Fn-3
container ship construction
torsion box cross questions
parametric rolling
IOPP supplements
Oil record book codes
Gas detector measuring gases with values
Risk assessment
IMDG code
some more questions

Fn-5
Gen not properly synchronised action
If frequency not matching what will happen
Reverse power trip
How to order motor
Explosion classes
soft starter

Cross questions mostly will all

Result-Both Pass
8/06/2023
Noida mmd.
Sudhir kumar Srivastava.
Fn:3
-Condition of assignment.
-Intact stability.
-Damage stability.
-U have to discharge sludge tomorrow, what are the things u will prepare before
and after discharging. What entry in ORB.
-Audit and survey difference.
-Action in both cases if got deficiency.
Life boat davit safeties
1 2 more, not able to recall.

Fn:5
-Transformer losses.
-What is RMS value and its significance.
-ICCP explain.
-Purpose of reference electrode.
-Gen not building up voltage, ur action.
-Star delta starter components and benifits.

nt- chaudhary
Ext- Gadkar
Fun- 4b,6
28.06.2023

1. What is a turbocharger clogging ? What are the reasons and how to remove
2. Type of turbocharger system , why AE have pulse type .
3. Turbocharger balancing, how to do
4. Turbocharger overhauling of Main Engine..he want know about K,L,M
5. Type of seal in propeller shaft, what are benefits, also expalian neoprene rubber
.
6. Type of heat treatment , explain induction harding
7. MIG and TIG welding explain
8. Type of vibration register in engine . Explain about moment compensator.

1.Cow washing procedure and requirements?

2.Oil tanker structure and how ship is stiffened forward of the engine room
bulkhead?
3.Longitudinal and transversal framing system?
4.Solas training manual where it’s located and why are the contents of the manual?
5.how the crude oil taker is strengthened compared to others.
6.problems during synchronisation?
7. How is reverse power operated and how it works.
8.preferential tripping relay working and timings for the trips.
9. How to order a sea water motor?
10.how to repair a motor soaked in sea water?
Mr Praveen Nair and Mr chandershekhran.

Int sudhir
Ext sudhir

Fn3
Diff in construction on bulbous and bulk and container
Esp
Braking test on windlass
Tires of oil pollution
3tiers of compensation

F6
Pickling of pipe
Diff in sch n gi pipe
Hydraulic pipe checks after welding frm shore
Crosshead bearing overhaul
F3 pass 6 repeat

nt-vikrant rai sir

Ext-brij sir
Attempt-1st
Fn-4b&6
Types of piston rings
Supercharging n turbocharging
Fame in fuel oil
Vlsfo problems(storing +consume)
Risk assement
Type of coating in piston ring specifically dlu something
Pickling
Beta ratio
Eiapp n iapp
Eedi,eeoi,eexi
Soldering n welding
Rudder inspection
Dpt principal
Few more don’t remember
Fn 6 pass
Thank you Sarthak verma,Nitesh sharma bhai,Paras khatri for devoting time in
discussion till last moment.
Guys please post questions.

Ext ... vishwanathan sir

Int - Praveen nair
Fn 5
UTI on tankers
Pump room safeties
Exd and Exi
Types of starter
Diff between auto transformer and soft starter
4 knobs on governor
In prefertinal tripping how will you come to know that which breaker will trip first
Routine maintenance on brush less alternator

Too much cross questions.

Fn 6
Type of engine
Copt overspeed trip how to do and types of overspeed trip
Sea water pump performance
How will you take LO sample from aux engine
Crosshead bearing and pin inspection
Fuel pump timing how to check and cross questions.

Beizzati bhi hogi be prepared for that ...

Got fn 6 .

Noida mmd 30.06.23

Int. Praveen nair sir
Ext .. Viswanathan sir
Function 4b
Type of engine sailed ae ,me blr specification
At starting video get paused because of internet issue .
Then he said wouldn’t be happen again
Then started questioning about

1-me engine what things are controlled electronically

2- air injection crank angle .

Then suddenly on top of my apartment someone start drilling he get irritated

☹
3- boiler water controller .
4- in ae engine effective delivery stroke .
5- he ask rating of air compressor which i get blank.i was not able to recall .

Finally repeat fn 4b

nt. Praveen nair sir

Ext. Viswanathan sir
Function 4b
Auxiliary engine tie rod and how gas pr. Is transfer.
How rotation is prevented in bottom end bearing in aux engine.
Egg Boiler soot blow indication

Function 6
Sea water pipe repair
Annelling

30 June 2023

Hyd jack overhaul ( told him about parts and seals and piston ring) open by air
pressure from coupling.

Exhaust valve overhaul

Spindle measurements, seat measurements (told him all clearances and burnaway )
I think got satisfied and moved to next question

Aux eng turbocharger overhaul ( told him complete procedure) again said okey and
moved to next question

Framo system heating arrangement ( not able to answer)

Suction valave seat removal procedure ( told him about cutting the seat and all )
looked not very satisfied

Now said you have answered 50% and that is fail

Asked is 50% fail , I said I don't know the pass percentage

Said okey last question

Asked about approach of oil in hotwell during sailing, approach
I started with cleaning of oil sheen from hotwell, and removing oil both got busy on
phone and in midway told me to repeat the answer from start, i started again now
told me to come to point, i said leak from engine room is the reason , not stopped
me and said you are not coming to the point
I requested him speak , and wanted to say, check of steam trap drain
But told me please disconnect you have to repeat.

MMD Noida
30June2023
Int- Sudhir Kumar Shrivastava
Ext- Sudhir Nijhawan
Fun-6
1. Compressor knocking sound coming.what you will do.
2. Bumping clearence.how to measure.
3.Fuel injector leak.how to know.draw dram card of leaky injector.
4. Overhaul ME injector.how will u check nozzle.
5. oil in the boiler.what to do all procedure.
6. Dent in plate.what you will do.
7.What tools you will prepare before dry dock.
8. Bilge pump overhaule.
In this he wants to know crosshead very important to inspect.
9. Why we use vaccum condenser.
1-2 more not remember

30.06.2023
Ext- Anil deswal
Int- anirudh chaki
Fun- 3
Written and oral status
1. Fire in container, indication, how to extinguish. FEU & TEU DIMENSIONS.
2. Transom space.
3. Scavenge fire, indication and action
4. Shell expansion plan
One more
Result: pass