Scribd
Upload
71 views3 pages

CalcForge Beam Calculation

The document provides an analysis of a 10m beam with specific properties and loads applied at various points. It includes details on bending moments, shear forces, and deflection predictions, indicating maximum and minimum values. The report emphasizes the need for verification by a competent Civil Engineer.

Uploaded by

sujayan2005
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views3 pages

CalcForge Beam Calculation

The document provides an analysis of a 10m beam with specific properties and loads applied at various points. It includes details on bending moments, shear forces, and deflection predictions, indicating maximum and minimum values. The report emphasizes the need for verification by a competent Civil Engineer.

Uploaded by

sujayan2005
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Analysis generated using https://www.calcforge.

com

Beam Analysis
May 29, 2025, 10:53 a.m.

Beam details
This beam is 10m in length, with a second moment of area of 473cm 4 and a
Young's Modulus of 210GPa. No self-weight is applied to the beam.

Neither end of the beam is fixed in position

Pin joints support the bea and are positioned at: 2.5m, 7.5m,

Point loads are applied to the beam at the positions: 12.0kN at 3m, 5.0kN at 6m,

Varying Distributed Loads are applied to the beam at the following positions:
5.0-10.0kN/m from 0m to 5m, 10.0-5.0kN/m from 5m to 10m,

Beam force diagrams:

This report must be checked & verified by a competant Civil Page 1 of


Engineer. 3
Analysis generated using https://www.calcforge.com

This report must be checked & verified by a competant Civil Page 2 of


Engineer. 3
Analysis generated using https://www.calcforge.com

Beam forces summary


Max predicted Min predicted
Bending moment 17.2kNm -18.2kNm
Shear force 34.2kN -26.6kN
Deflection 12mm -37mm

This report must be checked & verified by a competant Civil Page 3 of


Engineer. 3

You might also like