Requirement of Rexine (0.

7 mm thickness)
S.No. Test Name Test Method Requirement
1 Breaking Strength IS 7016 Part 2 Min. 5 N/mm
Elongation at break
2 At Warp IS 7016 Part 2 Min. 7%
At Weft Min. 15%
3 Tear Strength IS 15298 Part 1 Min. 20 N
No damage to coating /
Flexing resistance lamination till 100000 cycles at
4 ISO 17694
dry condition &
20000 cycles at wet condition
5 Peel off Strength SATRA TM 401 Min. 2.0 N/mm
Colour fastness to rubbing
6 Dry 20 Rubs ISO 20433:2017 Min. Grade 3
Wet 10 Rubs Min. Grade 3

Requirement of Rexine (1.2 mm & 1.4 mm thickness)

S.No. Test Name Test Method Requirement
1 Breaking Strength IS 7016 Part 2 Min. 7 N/mm
Elongation at break
2 At Warp IS 7016 Part 2 Min. 7%
At Weft Min. 15%
3 Tear Strength IS 15298 Part 1 Min. 25 N
No damage to coating /
Flexing resistance lamination till 150000 cycles at
4 ISO 17694
dry condition &
25000 cycles at wet condition
5 Peel off Strength SATRA TM 401 Min. 2.0 N/mm
Colour fastness to rubbing
6 Dry 20 Rubs ISO 20433:2017 Min. Grade 3
Wet 10 Rubs Min. Grade 3
Requirement for Velcro
S.No. Test Name Test Method Requirement
Peel Strength
1 Initial IS 8085 Part 18 Min. 0.10 N/mm
After 5000 cycles Min. 0.08 N/mm
Shear Strength
2 Initial IS 8085 Part 19 Min. 75 KPa
After 5000 cycles Min. 65 KPa

Requirement for Buckle

S.No. Test Name Test Method Requirement
IS 6721:2023
1 Attachment strength of Buckle Min. 200 N
Annex D

Requirement for PVC Strap (V Shape)

S.No. Test Name Test Method Requirement
1 Strap to Strap breaking strength IS 10702:2023 Annex G Min. 30 Kg
2 Toe portion to Strap breaking strength IS 10702:2023 Annex G Min. 10 Kg
3 Elongation at break IS 10702:2023 Annex G Min. 250 %age
* only for Solid Strap

Requirement for Outer Box

S.No. Test Name Test Method Requirement
1 Brusting Strength ISO 2758:2014 Min. 8.0 kg/cm²
2 No. of Ply Countable 5
 3 Moisture Content Moisture Meter Max. 20 %age
*Remark = No. of ply may be differ as per party order

Requirement for Inner Box

S.No. Test Name Test Method Requirement
1 Brusting Strength ISO 2758:2014 Min. 4.6 kg/cm²
2 No. of Ply Countable 3
3 Moisture Content Moisture Meter Max. 20 %age
4 Pasting Inhouse Atleast the paper
should be torn
while seprating
from the joint
*Remark = No. of ply may be differ as per party order

Requirement for Upper Material-Non Leather (Coated Fabric and Textile)

S.No. Test Name Test Method Requirement
Breaking strength Min. 7.0 N/mm
1 ISO 17706
Elongation at break Min. 7.0 %age
IS 7016 (Part 3/Sec 1)
2 Tear Strength, Min. 30 N
Method B
3 Strength at needle perforation IS 8085 (Part13) Method A Min. 3.5 N/mm
Flexing resistance, Flexes
a) Dry 100 000 flexes No crack
4 b) Wet 50 000 flexes IS 8085 (Part 20) No crack
c) At (-) 5 °C 25 000 flexes No crack
(applicable only for cold region)
Water vapour permeability IS 15298 (Part 1) Min. 0.8 mg/cm2/hr.
5
(WVP)
 Water vapour coefficient (WVC),
IS 15298 (Part 1)
6 (Applicable only for Min. 15 mg/cm2
non-laminated textile)
Abrasion resistance
a) Dry 51 200 cycles IS 15298 (Part 1) No hole formed
7
b) Wet 25 600 cycles No hole formed
(applicable for unlined upper)

Requirement for Lining

S.No. Test Name Test Method Requirement
IS 7016 (Part 3/Sec 1)
1 Tear Strength, Min. 15 N
Method B
Abrasion resistance
a) For vamp and quarter
1) Dry at 25,600 cycles
IS 15298 (Part 1)
2 2) Wet 12,800 cycles No hole formation
b) For heel
1) Dry at 51,200 cycles
2) Wet 25,600 cycles
Colour fastness rubbing Gray scale rate
(crocking)
3 IS/ISO 105 X12
a) Dry 10 rubs Min Grade 3
b) Wet 10 rubs Min Grade 3
Colour fastness to perspiration
4
(contact method- staining) Gray scale rate Min Grade 3 IS 6191 (Part 6)
 Water vapour permeability, Min. 2.0 mg/cm2/hr.
(applicable only for textile
and leather lining) IS 15298 (Part 1)
5
Water vapour coefficient, Min. 20 mg/cm2
(applicable only for textile
and leather lining)

Requirement for In-socks

Abrasion resistance
IS 15298 (Part 1)
1 a) Dry at 25 600 cycles No hole formed
b) Wet at 12 800 cycles No hole formed
Water absorption, mg/cm2 IS 15298 (Part 1) Min. 60 mg/cm2
2
Water desorption, percent Min. 70%age

Requirement for Lace

1 Lace breaking strength IS 15844 (Part 1) Annex K Min. 200 N
2 Lace tag strength IS 15844 (Part 1) Annex L Min. 120 N
No breakage before 5000
3 Lace to lace abrasion resistance IS 8085 (Part 17)
cycles
Colour fastness to water for lace contact method
4 staining IS 6191 (Part 2) Scale 3
Gray scale rate