NOVOSTRICTIVE

Transducer
up to 4250 mm
touchless

Series TH1

Special features High precision transducer with touchless magnetostrictive

• Touchless magnetostrictive measurement technology technology for mechanically decoupled and therefore wear-free
• Rod style transducer, integratable position measurement for lengths up to 4250 mm.
• Non-contacting position detection with ring shaped position marker The integrable and pressure-resistant rod design with passive
• Unlimited mechanical life ring position markers allow the use inside of hydraulic cylinders.
• Resolution up to 1 µm, independently of length Here, the pressure area is sealed by an O-ring on the flange.
• Low temperature coefficient <15 ppm/K
• Position-Teach-In Depending on the interface, up to three positions and speed can
• Insensitive to shock and vibration be measured.
• Operating pressure up to 350 bar
• Protection class IP67 / IP68
• Interfaces: Analog, SSI, Impulse, CANopen, IO-Link

Applications
• Fluid Power
Pneumatic- or Hydraulic Cylinder
• Manufacturing Engineering
• Mobile Machinery

Page 1
 Contents

Mechanical Data 3
Analog Versions
Technical Data 4
Ordering Specifications 5
Digital Versions
SSI 6
Impulse 7
Ordering Specifications 8
Fieldbus, IO-Link Versions
CANopen 9
IO-Link 10
Ordering Specifications 11
Accessories
Position marker 12
Fastening elements 13
M12 Connector System 14
M16 Connector System 17

Page 2 back to contents

 Mechanical Data

Description
Materials Housing: Anodized aluminum, AlMgSi0,5 F22, 3.3206.71
Screw flange: stainless steel X2CrNiMoN 18-14-3, 1.3952
Rod: stainless steel X6CrNiMoTi 17-12-2, 1.4571
Mounting Bushing M18x1,.5 for screw plug hole per ISO6149
Bushing 3/4“-16UNF for screw plug hole per SAE J475
Position marker Ring shaped position marker
Messverfahren NOVOSTRICTIVE, touchless magnetostrictive
Electr. connections Connector M12x1, 4-pol., 5-pol. / 8-pin., shielded
Connector M16x0.75 (IEC 130-9), 6-pin. / 8-pon., shielded
PUR-cable, 8x0.25 mm2, shielded; 1 m, 3 m oder 5 m length
Electronic SMD with ASIC, integrated
Connector casing (shield) is connected to the sensor housing.
Housing is capacitively decoupled to the electronics

Mechanical Data
Dimensions see dimension drawing
Electrical measuring range 0050 up to 4250 mm in 25 mm steps
(Dimension L) other lengths on request
Max. operational speed 10 ms-1
with valid ouput signal
Max. operational acceleration 200 ms-2
with valid ouput signal
Shock (IEC 60068-2-27) 100 (11 ms) (single hit) g
Vibration (IEC 60068-2-6) 20 (5...2000 Hz, Amax = 0.75 mm) g
Protection class IP67 with fastened connector
(DIN EN 60529) IP68 with cable connection
Life Mechanically unlimited
Operating temperature range -40 ... +85 °C
Storage temperature range -40 ... +100 °C
Operating humidity range 0 ... 95 (no condensation) % R.H.
Pressure rating
Operating pressure < 350 bar
Pressure peaks < 600 bar
Burst pressure > 700 bar

CAD data see

www.novotechnik.de/en/download/cad-data/

Page 3 back to contents

 Technical Data
Analog Versions

Type designations TH1- _ _ _ _- _ _ _ - 41 _ - _ _ _ TH1- _ _ _ _- _ _ _ - 42 _ - _ _ _

Voltage Current
Electrical Data
Electrical measuring range (dimension L) 0050 up to 4250 mm
Output signal 0.1 ... 10 V (load > 5 kΩ) 0.1 ... 20 mA (burden < 500 Ω)
4 ... 20 mA (burden < 500 Ω)
Number of channels 2 1
Sampling rate / Update rate < 750 mm: 2kHz, 750 ... < 2000 mm: 1 kHz, > 2000 mm: 05 kHz
Extrapoliated to 16 kHz
Resolution 16 Bit
Absolute linearity * < ± 0.02 (min. ± 50 µm) % FS
Tolerance of electr. zero point ± 0.5 (min. 2 x reproducibility) mm
Reproducibility < 0.03 % FS
Hysteresis < 0.01 % FS
Temperature error < 30 (min. 0,01 mm/K) ppm/K
Supply voltage 24 (19 ... 30) VDC
Supply voltage ripple < 10 % Ub
Current consumption < 100 mA
Overvoltage protection 40 (temporary / 1 min.) VDC
Polarity protection Yes, up to supply voltage max. VDC
Short circuit protection Yes (outputs vs. GND and supply voltage max.)
Insulation resistance (500 VDC) > 10 MΩ
Environmental Data
MTTF (DIN EN ISO 13849-1 28 Years
parts count method, w/o load, wc)
Functional safety If you need assistance in using our products in safety-related systems, please contac us
EMC compatibility EN 61000-4-2 Electrostatic discharges (ESD) 4 kV, 8 kV *) Valid for channel 1; channel 2 with additional
EN 61000-4-3 Electromagnetic fields 10 V/m offset and gradient tolerances (inverted signal
EN 61000-4-4 Electrical fast transients (burst) 2 kV from channel 1).
EN 61000-4-6 Conducted disturbances, induced by RF-fields 10 V eff. Measured with position marker Z-TH1-P18 or
EN 55011 Radiated disturbances class B Z-TH1-P19.

Pin assignment
Connector Cable Connector Analog Analog Connector Connector Analog Analog
code 101, 102 code 20_ with cable voltage current code 103 with cable Voltage Current
(Accessories) (Accessories)
Pin 1 YE WH do not connect 0(4)...20 mA Pin 1 WH 0 ...+10 V 0 (4)...20 mA
Pin 2 GY BN Signal GND Signal GND Pin 2 BN Signal GND Signal GND
Pin 3 PK GN +10...0 V do not connect Pin 3 BU +10...0 V do not connect
Pin 4 RD YE DIAG * DIAG * Pin 4 BK GND GND
Pin 5 GN GY 0...+10 V do not connect Pin 5 GY Supply voltage Supply voltage
Pin 6 BU PK GND GND Pin 6 GN GND GND
Pin 7 BN BU Supply voltage Supply voltage
Pin 8 WH RD PROG * PROG *
*) Connect only for Teach-In-function (see manual).

Page 4 back to contents

 Ordering
Specifications
Analog Versions
- Voltage
- Current

Ordering Specifications Electrical interfaces

4: Analog Interfaces
Preferred types printed in bold

Output signal analog interfaces 4 _ _

1: Voltage output
2: Current output

Analog interface voltage output 41_

1: 0 ... 10 V and 10 ... 0 V

Analog interface current output 42_

1: 0 ... 20 mA
2: 20 ... 0 mA
3: 4 ... 20 mA
4: 20 ... 4 mA

Electrical connection
101: Connector M16x0.75 (IEC 130-9), 8-pin
102: Connector M12x1, 8-pin
103: Connector M16x0.75 (IEC 130-9), 6-pin
201: Cable, 8-pol., shielded, 1 m
203: Cable, 8-pol., shielded, 3 m
205: Cable, 8-pol., shielded, 5 m
Other cable lengths and assembled connectors on request

T H 1 – 0 8 0 0 – 1 0 2 – 4 1 1 – 1 0 2

Series Electrical measuring range Mechanical version

Standard lengths 102: Screw flange M18x1.5, zero point at 30 mm
0050 up to 4250 mm 103: Screw flange 3/4“ - 16UNF, zero point at 30 mm
in 25 mm-steps. 104: Screw flange M18x1.5, zero point at 51 mm
Other lengths on request 105: Screw flange 3/4“ - 16UNF, zero point at 51 mm
106: Screw flange M18x1.5, zero point at 30 mm, for supporting at rod end *
107: Screw flange 3/4“ - 16UNF, zero point at 30 mm, for supporting at rod end *
108: Screw flange M18x1.5, zero point at 51 mm, for supporting at rod end *
109: Screw flange 3/4“ - 16UNF, zero point at 51 mm, for supporting at rod end *
Other mechanical versions on request

*) with internal thread M4x6 at rod end and additional length 7.5 mm

Important: Avoid equalizing currents in the cable shield caused by potential differences.
Twisted pair cable (STP) is recommended.

Page 5 back to contents

 Technical Data
SSI-Interface

Type designations TH1 - _ _ _ _ - _ _ _ - 2_ _ - _ _ _

Synchron-Serial-Interface (SSI)
Electrical Data
Electrical measuring range (dimension L) 0050 up to 4250 mm
Protocol SSI 24 and 25 bit (26 bit on request)
Inputs RS422
Monoflop time (tm) 30 µs
Encoding Gray, Binary
Sampling rate / Update rate < 750 mm: 2 kHz, 750 ... < 2000 mm: 1 kHz, > 2000 mm: 0.5 kHz kHz
Extrapolated to 16 kHz
Resolution (LSB) 1, 5 or 10 (other resolutions on request) µm
Absolute linearity * < 250 mm < ±25 μm
< 750 mm < ±30 μm
< 1000 mm < ±50 μm
< 2500 mm < ±80 μm
up to 4250 mm < ±120 μm
Tolerance of electr. zero point ± 0.5 mm
Reproducibility (rounded to LSB) <6 µm
Hysteresis (rounded to LSB) <4 µm
Temperature error < 15 (min. 0.01 mm/K) ppm/K
Supply voltage 24 (13 ... 34) VDC
Supply voltage ripple < 10 % Ub
Overvoltage protection 40 (permanent) VDC
Current consumption < 100 mA
Polarity protection Yes, up to supply voltage max.
Short circuit protection Yes (outputs vs. GND and supply voltage up to 7 V)
Ohmic load at outputs > 120 Ω
Max. Clock rate 2 MHz
Insulation resistance (500 VDC) > 10 MΩ
Environmental Data
MTTF (DIN EN ISO 13849-1, 32 Years
parts count method, w/o load, wc)
Functional safety If you need assistance in using our products in safety-related systems, please contac us
EMC compatibility EN 61000-4-2 Electrostatic discharges (ESD) 4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields 10 V/m
EN 61000-4-4 Electrical fast transients (burst) 1 kV
EN 61000-4-6 Conducted disturbances, induced by RF-fields 10 V eff. *) Measured with resolution 1 µm.
EN 61000-4-8 Magnetfelder mit energietechnischen Frequenzen 3 A/m At resolution > 1 μm the permissible linearity
EN 55011 Radiated disturbances class B error is increased by the resolution.

Pin assignment
Connector Cable Connector SSI Connector Connector Connector SSI
code 101, 102 code 20 _ with cable Interface code 103 with cable code 108 Interface
(Accessories) (Accessories)
Pin 1 YE WH Clk + Pin 1 WH Pin 1 Data -
Pin 2 GY BN Data + Pin 2 BN Pin 2 Data +
Pin 3 PK GN Clk - Pin 3 BU Pin 3 Clk +
Pin 4 RD YE do not connect Pin 4 BK Pin 4 Clk -
Pin 5 GN GY Data - Pin 5 GY Pin 5 Supply voltage
Pin 6 BU PK GND Pin 6 GN Pin 6 GND
Pin 7 BN BU Supply voltage - - Pin 7 do not connect
Pin 8 WH RD do not connect

Page 6 back to contents

 Technical Data
Impulse-Interface

Type designations TH1- _ _ _ _ - _ _ _ - 11 _ - _ _ _

Start-Stop-Impulse-Interface
Electrical Data
Electrical measuring range (dimension L) 0050 up to 4250 mm
Number of position markers 1 up to 3
Protocol Impulse
Inputs RS422
Sampling rate / Update rate < 500 mm: 1 kHz, 500 ... < 2000 mm: 0.5 kHz, > 2000 mm: 0.25 kHz kHz
Resolution Depending on interpretation, normalized to 2800 ms-1
Absolute linearity < 1000 mm < ±50 μm µm
< 2500 mm < ±80 μm
up to 4250 mm < ±120 μm
Tolerance of electr. zero point ± 0.5 mm
Reproducibility <6 µm
Hysteresis <4 µm
Temperature error < 15 (min. 0,01 mm/K) ppm/K
Supply voltage 24 (13 ... 34) VDC
Supply voltage ripple < 10 % Ub
Overvoltage protection 40 (permanent) VDC
Current consumption < 100 mA
Polarity protection Yes, up to supply voltage max.
Short circuit protection Yes (outputs vs. GND and supply voltage up to 7 V)
Insulation resistance (500 VDC) > 10 MΩ
Environmental Data
MTTF (DIN EN ISO 13849-1, 27 Years
parts count method, w/o load, wc)
Functional safety If you need assistance in using our products in safety-related systems, please contac us
EMC compatibility EN 61000-4-2 Electrostatic discharges (ESD) 4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields 10 V/m
EN 61000-4-4 Electrical fast transients (burst) 2 kV
EN 61000-4-6 Conducted disturbances, induced by RF-fields 10 V eff.
EN 55011 Radiated disturbances class B

Pin assignment
Connector Cable Connector Start/Stop-Impulse Connector Connector Start/Stop-Impulse
code 101, 102 code 20 _ with cable Interface code 103 with cable Interface
(Accessories) (Accessories)
PIN 1 YE WH INIT + Pin 1 WH Start/Stop -
PIN 2 GY BN Start/Stop + Pin 2 BN Start/Stop +
PIN 3 PK GN INIT - Pin 3 BU INIT +
PIN 4 RD YE do not connect Pin 4 BK INIT -
PIN 5 GN GY Start/Stop - Pin 5 GY Supply voltage
PIN 6 BU PK GND Pin 6 GN GND
PIN 7 BN BU Supply voltage
PIN 8 WH RD do not connect

Page 7 back to contents

 Ordering
Specifications
Digital Versions
- SSI
- Start-Stop-Impulse

Ordering Specifications Electrical Interfaces

1: Impulse Interface
Preferred types printed in bold
2: SSI Interface

Output Signal Impulse Interface 1 _ _

1: Impulse-Interface Start Stop Signal

Output Signal SSI Interface 2 _ _

1: SSI 24 bit
2: SSI 25 bit
7: SSI 26 bit (25 = alarm, 26 = parity even) on request

Impulse-Interface Start Stop Signal 11_

1: For 1 position marker
2: For 2 position markers
3: For 3 position markers

SSI-Interface 2 _ _
1: Binary code; resolution 5 μm
2: Gray code; resolution 5 μm
4: Binary code; resolution 1 μm
5: Gray code; resolution 1 μm
7: Binary code; resolution 10 µm
8: Gray code; resolution 10 μm

Electrical connection
101: Connector M16x0,75 (IEC 130-9), 8-pin
102: Connector M12x1, 8-pin
103: Connector M16x0.75 (IEC 130-9), 6-pin
108: Connector M16x0.75 (IEC 130-9), 7-pin (only SSI-Interface)
201: Cable, 8-pol., shielded, 1 m
203: Cable, 8-pol., shielded, 3 m
205: Cable, 8-pol., shielded, 5 m
Other cable lengths and assembled connectors on request

T H 1 – 0 8 0 0 – 1 0 2 – 2 1 1 – 1 0 2

Series Electrical measuring range Mechanical version

Standard lengths 102: Screw flange M18x1.5, zero point at 30 mm
0050 up to 4250 mm 103: Screw flange 3/4“ - 16UNF, zero point at 30 mm
in 25 mm-steps. 104: Screw flange M18x1.5, zero point at 51 mm
Other lengths on request 105: Screw flange 3/4“ - 16UNF, zero point at 51 mm
106: Screw flange M18x1.5, zero point at 30 mm, for supporting at rod end *
107: Screw flange 3/4“ - 16UNF, zero point at 30 mm, for supporting at rod end *
108: Screw flange M18x1.5, zero point at 51 mm, for supporting at rod end *
109: Screw flange 3/4“ - 16UNF, zero point at 51 mm, for supporting at rod end *
Other mechanical versions on request

*) with internal thread M4x6 at rod end and additional length 7.5 mm

Important: Avoid equalizing currents in the cable shield caused by potential differences.
Twisted pair cable (STP) is recommended.

Page 8 back to contents

 Technical Data

Type designations TH1 - _ _ _ _ - _ _ _ - 6 _ _ - _ _ _

CANopen-Interface
Electrical Data
Measured variables Position and speed
Electrical measuring range (dimension L) 0050 up to 4250 mm
Measuring range speed 0 ... 10 ms-1
Number of position markers 1/2
Output signal / Protocol CANopen protocol to CiA DS-301 V4.2.0,
Device profile DS-406 V3.2 Encoder class C2, LSS services to CiA DS-305 V1.1.2
Programmable parameters Position, speed, cams, working areas, temperature, node-ID, baud rate
Node-ID 1 ... 127 (default 127)
Baudrate 20 ... 1000 kBaud
Resolution
Position 1 5 µm
Speed 0.1 0.5 mms-1
Update rate 1 kHz
(internal sampling rate < 750 mm: 2 kHz, 750 ... < 2000 mm: 1 kHz,
> 2000 mm: 0.5 kHz)
Absolute linearity * < 250 mm < ±25 μm
< 750 mm < ±30 μm
< 1000 mm < ±50 μm
< 2500 mm < ±80 μm
up to 4250 mm < ±120 μm
Tolerance of electr. zero point 0.5 ±mm
Reproducibility (rounded to resolution) <6 µm
Hysteresis (rounded to resolution) <4 µm
Temperature error < 15 (min. 0.01 mm/K) ppm/K
Supply voltage 24 (13 ... 34) VDC
Supply voltage ripple < 10 % Ub
Current consumption < 100 mA
Overvoltage protection 40 (permanent) VDC
Polarity protection Yes, up to supply voltage max.
Short circuit protection Yes (outputs vs. GND und supply voltage max.)
Insulation resistance (500 VDC) > 10 MΩ
Bus termination internal no
Environmental Data
MTTF (DIN EN ISO 13849-1 25 Years
parts count method, w/o load, wc)
Functional safety If you need assistance in using our products in safety-related systems, please contact us
EMC compatibility EN 61000-4-2 Electrostatic discharges (ESD) 4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields 10 V/m
EN 61000-4-4 Electrical fast transients (burst) 1 kV *) Measured with resolution 1 µm.
EN 61000-4-6 Conducted disturbances, induced by RF-fields 10 V eff. At resolution > 1 μm the permissible linearity
EN 55016-2-3 Noise radiation class B error is increased by the resolution.

Pin assignment

Connector Connector CANopen Interface

code 106 code 105

Pin 1 Pin 3 CAN_SHLD ***

Pin 2 Pin 5 Supply voltage

Pin 3 Pin 6 GND

Pin 4 Pin 2 CAN_H

Pin 5 Pin 1 CAN_L

participant
CANopen

- Pin 4 n/a

***) CAN_SHLD: CAN-shield, internally connected to housing

Page 9 back to contents

 Technical Data

Type designations TH1 - _ _ _ _ - _ _ _ - A _ _ - _ _ _

IO-Link
Electrical Data
Measured variables Position, speed and temperature
Electrical measuring range (dimension L) 0050 up to 4250 mm
Number of position markers 1 up to 3
Output signal / protocol IO-Link Spec V1.1 to IEC 61131-9, Smart Sensor Profil (V1.0 compatible)
Programmable parameters Zero point offset, resolution, averaging
Configurability Number of position markers and measured variables (position, speed).
All product versions listed in the ordering specifications (e.g. 1 x position) are
also configurable by the customer (e.g. into 2 x position and 2 x speed)
Transfer rate COM 3 (230.4 kB)
Frame type 2.2
Minimum cycle time 1 ms
Update rate 1 kHz
(internal sampling rate < 750 mm: 2 kHz, 750 ... < 2000 mm: 1 kHz,
> 2000 mm: 0,.5 kHz)
Resolution
Position 1 5 µm
Speed 0.1 0.5 mms-1
Reproducibility (rounded to resolution) <6 µm
Hysteresis (rounded to resolution) <4 µm
Absolute linearity * < 250 mm < ±25 μm
< 750 mm < ±30 μm
< 1000 mm < ±50 μm
< 2500 mm < ±80 μm
up to 4250 mm < ±120 μm
Zero point tolerance 0.5 ±mm
Temperature error < 15 (min. 0,01 mm/K) ±ppm/K
Supply voltage 24 (18 ... 30) VDC
Supply voltage ripple max. 10 % Ub
Current consumption (w/o load) < 100 mA
Reverse voltage yes, up to supply voltage max.
Short circuit protection yes (C/Q vs. GND and supply voltage)
Overvoltage protection 36 (permanent) VDC
Insulation resistance (500 VDC) > 10 MΩ
Environmental Data
MTTF (DIN EN ISO 13849-1 > 28.6 Years
parts count method, w/o load, wc)
Functional safety If you need assistance in using our products in safety-related systems,
please contact us
EMC compatibility EN 61000-4-2 Electrostatic discharges (ESD) 4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields 10 V/m
EN 61000-4-4 Electrical fast transients (burst) 1 kV
*) Measured with resolution 1 µm.
EN 61000-4-6 Conducted disturbances, induced by RF-fields 10 V eff.
At resolution > 1 μm the permissible linearity
EN 55016-2-3 Noise radiation class B
error is increased by the resolution.

Pin assignment

Connector M12 Connector with cable IO-Link

Code 107 (accessories)

PIN 1 BN Supply voltage (L+)

PIN 2 WH do not connect *

PIN 3 BU GND (L-)

PIN 4 BK C/Q

*) alternatively on GND

Page 10 back to contents

 Ordering
Specifications

Ordering Specifications Electrical interface

6: CANopen-Interface
Preferred types printed in bold
A: IO-Link

Interface parameters for CANopen 6 _ _

1: Resolution 5 μm, 1 x position and speed, 1 position marker fix
3: Resolution 1 μm, 1 x position and speed, 1 position marker fix
5: Resolution 5 μm, 2 x position and speed, 2 position markers fix
6: Resolution 1 μm, 2 x position and speed, 2 position markers fix

Interface parameters for IO-Link A _ _

11: Resolution 5 µm, 1 x position, 1 position marker fix
12: Resolution 5 µm, 1 x position and speed, 1 position marker fix
13: Resolution 5 µm, 2 x position, 2 position markers fix
14: Resolution 5 µm, 2 x position and speed,2 position markers fix
15: Resolution 5 µm, 3 x position, 3 position markers fix

31: Resolution 1 µm, 1 x position, 1 position marker fix

32: Resolution 1 µm, 1 x position and speed, 1 position marker fix
33: Resolution 1 µm, 2 x position, 2 position markers fix
34: Resolution 1 µm, 2 x position and speed, 2 position markers fix
35: Resolution 1 µm, 3 x position, 3 position markers fix

Baud rate CANopen 6 _ _

1: Baud rate 1000 kBaud
2: Baud rate 800 kBaud
3: Baud rate 500 kBaud
4: Baud rate 250 kBaud
5: Baud rate 125 kBaud
7: Baud rate 50 kBaud
8: Baud rate 20 kBaud

Electrical connection CANopen

105: Connector M16x0.75 (IEC130-9), 6-pin
106: Connector M12x1, 5-pin

Electrical connection IO-Link

107: Connector M12x1, 4-pin

T H 1 – 0 8 0 0 – 1 0 2 – 6 1 3 – 1 0 6

Series Electrical measuring range Mechanical version

Standard lengths 102: Screw flange M18x1.5, zero point at 30 mm
0050 up to 4250 mm 103: Screw flange 3/4“ - 16UNF, zero point at 30 mm
in 25 mm-steps. 104: Screw flange M18x1.5, zero point at 51 mm
Other lengths on request 105: Screw flange 3/4“ - 16UNF, zero point at 51 mm
106: Screw flange M18x1.5, zero point at 30 mm, for supporting at rod end *
107: Screw flange 3/4“ - 16UNF, zero point at 30 mm, for supporting at rod end *
108: Screw flange M18x1.5, Zero point at 51 mm, for supporting at rod end *
109: Screw flange 3/4“ - 16UNF, zero point at 51 mm, for supporting at rod end *
Other mechanical versions on request

*) with internal thread M4x6 at rod end and additional length 7.5 mm

Important: Avoid equalizing currents in the cable shield caused by potential differences.
Only CANopen: Twisted pair cable (STP) is recommended.

Page 11 back to contents

 Position marker

Ring Position Marker Z-TH1-P18, P/N 400005697

Material PA6-GF25

Weight approx. 12 g

Operating temperature -40 ... +100° C

Surface pressure max. 40 N/mm2

Fastening torque of mounting screws, max. 1 Nm

Ring Position Marker Z-TH1-P19, P/N 400005698

Ring Position Marker with Spacer Z-TH1-PD19, P/N 400107117
11
8
8 Material PA6-GF
3,2 5
Spacer POM-GF

Weight approx. 14 g
4,3

Operating temperature -40 ... +100°C

13

32
24

Surface pressure max. 40 N/mm²

Fastening torque of mounting screws, max. 1 Nm

Spacer
22,5

U-shaped Position Marker Z-TH1-P25, P/N 400105076

.einstellungen Norm NT_Z000 aus ext. Datei laden! Material PA6-GF

zerdefinierte Blattgröße ( Spaltenbreite x Höhe)
für jede Z000 einzeln eingestellt werden!
Weight approx. 23 g
te 42 x (Spaltenhöhe egal) Operating temperature -40 ... +105°C
ten 87,5 x (Spaltenhöhe egal)
63,5

20
36,4

12

ten 134 x (Spaltenhöhe egal)

ten 180 x (Spaltenhöhe egal) Surface pressure max. 40 N/mm²
sgabe: Fastening torque of mounting screws, max. 1 Nm
RGB Vollfarbe
4,5

n Schwarz & Weiß (Bilevel)

mprimiert 9,5
10,5 Caution: For dimension of electrical zero point please follow the user manual!
dpi

Ring Position Marker Z-TH1-P30, P/N 400106139

17,4
8
Material NdFeB bonded (EP)

Weight approx. 5g

Operating temperature -40 ... +100°C

Surface pressure max. 10 N/mm²

Mounting via lock washer and lock ring

13,5

Page 12 back to contents

 Position marker
Fastening elements

Cylinder - Floating Position Marker Z-TH1-P21, P/N 400056044

Material 1.4404

Weight approx. 20 g

Operating temperature -40 ... +100°C

Compression strength, min. < 8 bar

Density 740 kg/m3

Immersion depth in water 26,6 mm

Bowl - Floating Position Marker Z-TH1-P22, P/N 400056045

Material 1.4571

Weight approx. 42 g

Operating temperature -40 ... +100°C

Compression strength, min. < 60 bar

Density 720 kg/m3

Immersion depth in water 36,7 mm

When using floating position markers, we

recommend to secure the marker against
loss with a washer at the rod end
(s. drawing).
For this purpose, a sensor version with
support at the rod end is required
(s. ordering code).

Mounting nut ISO 8675, Mounting nut DIN 934,

M18x1.5-A2 3/4“ - 16UNF-A2
P/N 400056090 P/N 400056091
Z-TH1-M01 Z-TH1-M02

Page 13 back to contents

 Connector System
M12

Pin assignment M12x1 Mating female connector, 8-pin,

1 = white straight, A-coded, with molded cable,
2 = brown shielded, IP67, open ended
3 = green
4 = yellow Connector Plastic PA
5 = grey housing
6 = pink Cable sheath PUR; Ø = max. 8 mm
7 = blue -25 °C...+80 °C (moved)
8 = red -50 °C...+80 °C (fixed)

Wires PP, 0.25 mm2

Length Type P/N

2m EEM 33-86 400005629

5m EEM 33-90 400005635
10 m EEM 33-92 400005637

Pin assignment M12x1 Mating female connector, 8-pin,

1 = white
angled, A-coded, with molded cable,
2 = brown
shielded, IP67, open ended
3 = green
4 = yellow Connecto Plastic PA
5 = grey housing
6 = pink
Cable sheath PUR; Ø = max. 8 mm,
7 = blue
-25 °C...+80 °C (moved)
8 = red
-50 °C...+80 °C (fixed)

Wires PP, 0.25 mm2

Length Type P/N

2m EEM 33-87 400005630
5m EEM 33-91 400005636
10 m EEM 33-93 400005638

Pin assignment M12x1 Mating female connector, 5-pin,

1 = Shield straight, A-coded, with molded cable,
2 = red (0.34 mm2) IP67, shielded, open ended, CAN-bus
3 = black (0.34 mm2) Connector PUR
4 = white (0.25 mm2)
housing
5 = blue (0-25 mm2)
Cable sheath PUR Ø = max. 7.2 mm,
-25 °C...+85 °C (moved)

Wires PP 2x 0.25 mm2

+ 2 x 0.34 mm2

Length Type P/N

2m EEM 33-41 400056141
5m EEM 33-42 400056142
10 m EEM 33-43 400056143

Pin assignment M12x1 Mating female connector, 5-pin,

straight, A-coded, with molded cable,
IP68, shielded, CAN-Bus

Connector PUR
housing

Cable sheath PUR; Ø 7.2 mm

-25 °C... +85 °C (fixed)

Length Type P/N

5m EEM 33-44 400056144

Page 14 back to contents

 Connector System
M12

Pin assignment M12x1 splitter / T-connector, 5-pin,

A-coded, IP68, 1:1 copnnection,
female - male - female, CAN-bus

Connector housing PUR

Temperature range -25 °C... +85 °C

Type EEM 33-45, P/N 400056145

Pin assignment M12x1 terminating resistor, 5-pin,

A-coded, IP67, 120 Ω resistance, CAN-bus
1 = n. c.
2 = n. c. Connector housing PUR
3 = n. c. Temperature range -25 °C... +85 °C
4= Resistance
5= 120 Ω Type EEM 33-47, P/N 400056147

Pin assignment M12x1 Mating female connector 5-pin,

straight, A-coded, with coupling nut,
srew termination, IP67, shieldable,
CAN-bus

Connector housing Metall

-40 °C...+85 °C

For wire gauge 6...8 mm, max. 0.75 mm2

Type EEM 33-73, P/N 400005645

Pin assignment M12x1 Mating female connector, 5-pin,

angled, A-coded, with coupling nut, screw
termination, IP67, shieldable, CAN-Bus

Connector housing Metall

-40 °C...+85 °C

For wire gauge 6...8 mm, max. 0.75 mm2

Type EEM 33-75, P/N 400005646

It is possible to turn and fix the contact

carrier in 90° positions.

Page 15 back to contents

 Connector System
M12

Pin assignment M12x1 Mating female connector, 4-pin,

straight, A-coded, with molded cable, not
1 = brown
shielded, IP67, open ended
2 = white
3 = blue Connector housing Plastic PA
4 = black
Cable sheath PUR; Ø = max. 6 mm,
-40 °C...+85 °C (fixed)

Wires PP, 0.34 mm2

Length Type P/N

2m EEM 33-35 400056135
5m EEM 33-36 400056136
10 m EEM 33-37 400056137

Pin assignment M12x1 Mating female connector, 4-pin,

angled, A-coded, with molded cable, not
1 = brown
shielded, IP67, open ended
2 = white
3 = blue Connector housing Plastic PA
4 = black
Cable sheath PUR; Ø = max. 6 mm,
-40 °C...+85 °C (fixed)

Wires PP, 0.34 mm2

Length Type P/N

2m EEM 33-38 400056138
5m EEM 33-39 400056139
10 m EEM 33-40 400056140

Pin assignment M12x1 Mating female connector, 4-pin,

angled, A-coded, with coupling nut,
screw termination, IP67, not shielded

Connector Plastic PBT

housing -25 °C...+90 °C

For wire gauge 6...8 mm, max. 0.75 mm2

Type EEM 33-89, P/N 400005634

Page 16 back to contents

 Connector System
M16

Pin assignment M16x0.75 Mating female connector, 6-pin,

straight, with molded cable, 2 m length,
1 = red
shielded, IP67, open ended
2 = black
3 = yellow Connector PUR
4 = blue housing
5 = white
Cable sheath PUR; Ø max. 6 mm,
6 = green
-5...+70 °C (moved)
-20...+70 °C (fixed)

Wires PVC, 6 x 0.25 mm2

Type EEM 33-26, P/N 400056126

This coupling can can be used in combination

with 5-pin M16 connectors. Than „pin 6/
green“ is open.

Pin assignment M16x0.75 Mating female connector, 6-pin,

angled, with molded cable, 2 m length,
1 = red shielded, IP67, open ended
2 = black
3 = yellow Connector PUR
4 = blue housing
5 = white Cable sheath PUR; Ø max. 6 mm,
6 = green -5...+70 °C (moved)
-20...+70 °C (fixed)

Wires PVC, 6 x 0.25 mm2

Type EEM 33-27, P/N 400056127

This coupling can can be used in combination

with 5-pin M16 connectors. Than „pin 6 /
green“ is open.

Pin assignment M16x0,75 Mating female connector, 6-pin,

straight, with coupling nut, solder terminal,
IP68, shielded

Connector housing CuZn

(Brass, nickel plated)
-40 °C... +85 °C

For wire gauge 4...8 mm,

max. 0.75 mm²

Type EEM 33-82, P/N 400005639

Pin assignment M16x0,75 Mating female connector, 6-pin,

angled, with couplingnut, solder terminal,
IP67, shielded

Connector housing CuZn

(Brass , nickel plated)
-40 °C... +95 °C

For wire gauge 6...8 mm, PG 9

max. 0.75 mm²

Type EEM 33-94, P/N 400005648

Page 17 back to contents

 Novotechnik
Messwertaufnehmer OHG
Postfach 4220
73745 Ostfildern (Ruit)
Horbstraße 12
73760 Ostfildern (Ruit)
Telefon +49 711 4489-0
Telefax +49 711 4489-118
info@novotechnik.de
www.novotechnik.de

© 07/2020
Printed in Germany.

Pin assignment M16x0.75 Mating female connector, 8-pin,

straight, with coupling nut, solder terminal,
IP68, shielded

Connector CuZn
housing (Brass, nickel plated)
-40 °C... +85 °C

For wire gauge 4...8 mm,

max. 0.75 mm²

Type EEM 33-84, P/N 400005627

Pin assignment M16x0.75 Mating female connector, 8-pin,

angled, with coupling nut, solder terminal,
IP67, shielded

Connector CuZn
housing (Brass, nickel plated)
-40 °C... +95 °C

For wire gauge 6...8 mm, PG 9

max. 0.75 mm²

Type EEM 33-85, P/N 400005628

Very good Electromagnetic Suited for applications in

Protection class IP67 to Compatibility (EMC) and shield dragchains
DIN EN 60529 systems

Very good resistance to oils, coo-

Protection class IP68 to
lants and lubricants
DIN EN 60529

CAN-bus UL - approved

Note: The protection class is valid

only in locked position with its
plugs.
The application of these products
in harsh environments must be
checked in particular cases.

The specifications contained in our datasheets are intended solely for informational purposes. The documented specification values are based on ideal operational and environmental conditions and
can vary significantly depending on the actual customer application. Using our products at or close to one or more of the specified performance ranges can lead to limitations regarding other per-
formance parameters. It is therefore necessary that the end user verifies relevant performance parameters in the intended application. We reserve the right to change product specifications without
notice.

Page 18 back to contents