Scribd
Upload
20 views10 pages

9806h Sip Trunk Configuration

The document outlines the configuration process for the 9806H SIP trunk, starting with a software upgrade using an FTP tool. It details steps for OLT and global configurations, including setting IP subnets, adding VLANs, and configuring SIP services. Additionally, it provides instructions for managing user groups and translation functions within the SIP framework.

Uploaded by

Andri Purnawan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
20 views10 pages

9806h Sip Trunk Configuration

The document outlines the configuration process for the 9806H SIP trunk, starting with a software upgrade using an FTP tool. It details steps for OLT and global configurations, including setting IP subnets, adding VLANs, and configuring SIP services. Additionally, it provides instructions for managing user groups and translation functions within the SIP framework.

Uploaded by

Andri Purnawan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 10

9806H SIP TRUNK CONFIGURATION

Before we do configuration, first step is upgrading 9806H with


version that support for sip trunk service
Local Upgrade Step
for local upgrade step we must prepare tool such as ftp tool and
software version. In this step we use wftpd32 for download
softaware version
1. Set up Ftp software (wftpd32)
User Ftp using zte/zte and software version folder on path
D:\9806H\sip_trunk
Set our pc ip to 10.62.5.1, default ip of 9806H is
10.62.5.101

2. Download software version

1. Telnet to 9806H or can use console to login


2. Check existing version
3. Download software version
Show new software version

Activate main version, save and reboot


4. Download patch and activated

Show software version


OLT Configuration
interface gpon-olt_1/17/8
onu 50 type ZTEG-9806H sn ZTEGA001092A

interface gpon-onu_1/17/8:50
name ISDN TEST
tcont 1 name VOIP profile UP-10M
gemport 1 name VOIP tcont 1
gemport 1 traffic-limit downstream DOWN-10M
service-port 2 vport 1 user-vlan 2471 vlan 2471

pon-onu-mng gpon-onu_1/17/8:50
flow mode 1 tag-filter vlan-filter untag-filter discard
flow 1 pri 0 vlan 2471
gemport 1 flow 1

Global Configuration
Protocol Set
9806#configure
voip license h248 0 sip 1
exit
save
reboot

add-vlan and tag


9806#configure
add-vlan 2471
vlan 2471 5/1 tag

Set ip subnet
9806#configure
ip subnet 10.30.0.50 255.255.255.252 2471 voip
ip route 0.0.0.0 0.0.0.0 10.30.0.49

SIP IDSN Basic Service Configuration

1. Config Server Agent


9806(voice)#sip server add index 1 proxyport 5060 proxyip
10.30.0.49 srvtype 1
9806(voice)#sip server mod index 1 proxytype 1
9806(voice)#sip agent add uaid 1 port 5060 domname
10.30.0.49 proxyindex1 1

2. Configuration global
9806(voice)# global digitmap add service SIP name sip body
X.

3. Config Narrowband Pra card


9806(voice)# board board-etuc add slot 1

4. Config number table fro PRA user


9806(voice)# sip parameter2 modify uaid 1 isdn-dmname sip

5. Config pri user un-register


9806(voice)# sip parameter modify register-pri-user not-
register-all

6. PRAuser config

Config group
9806(voice)# sip isdn hunting-group add g1 mode order

Config channel
9806(voice)# sip isdn group-channel add g1 1 1 begin-ts 1
num 30 type normal

Config main user


9806(voice)# sip isdn group-user add g1 03199208000

Config extend user


9806(voice)# sip isdn group-exten-user add g1 num 10
031992080 userid-length 2 userid-beginno 01

for translation function


9806(voice)# clip-trans trans-insert-number methodname out
insert-num 031992080 start-pos 1
9806(voice)# clip-trans trans-delete-number methodname in del-
length 9 start-pos 1

9806(voice)# sip isdn group-attribute modify g1 incoming-


translation-name in outgoing-translation-name out

You might also like