1 of 2
NOTE: The images shown are for illustration purposes only and may not be an exact Quotation
014696 Splashes.com
representation of the product. Please discuss any questions or concerns with your
customer service representative.
01-25043
Account Quote
January 20, 2025
Prepared For: Prepared By:
ON DEMAND PLG & HTG LTD TYRONE R
1474 BANFF PLACE ANDREW SHERET LIMITED - VICTORIA
VICTORIA BC W1-740 HILLSIDE AVE
PH: (778) 265-8216 BC V8T1Z4
PH: (250) 386-8311
Sub Total: $779.22
PST: $54.54
GST: $38.97
Total: $872.73
Notes:
Items marked with "NSR” are special order items and are not returnable. Exceptions are dependent on our supplier
agreeing to take back the item at which point restocking/freight charges will be applied.
DARYL
BONE
1305040 CADET PRO ELONGATED ADA TOILET BOWL - Bone - $275.29
3517A101.021
1305870 CADET PRO UNLINED 4.8L TOILET TANK - Bone - $131.99
4188A104.021
2000620 SLOWCLOSE ELONGATED TOILET SEAT - Bone - $58.91
1200E4B 006
1 of 2
NOTE: The images shown are for illustration purposes only and may not be an exact
representation of the product. Please discuss any questions or concerns with your
customer service representative. Sheret.com
2 of 2
WHITE
NOTE: The images shown are for illustration purposes only and may not be an exact
representation of the product. Please discuss any questions or concerns with your
1305035
customer service representative. CADET PRO ELONGATED Splashes.com
ADA TOILET BOWL - White -
$191.55
3517A101.020
1305865 CADET PRO UNLINED 4.8L TOILET TANK - White - $100.33
4188A104.020
2000478 ROUND EASY-CLEAN PLASTIC TOILET SEAT WITH $21.15
COVER - White - 730SLEC 000
Terms of Sale
- Our BC PST registration number is PST-1002-7500. Our GST/HST registration number is 893319657.
- Net 30 days month following.
- Errors and Omissions Excepted (E.& O.E.).
- Unless otherwise noted, all goods are FOB our warehouse and taxes are extra.
- The above pricing is based on sufficient lead time being provided at the time of ordering.
- This quotation is valid for no more than 30 days and prices are subject to change without notice.
- Delivery times are subject to manufacturer availability and may change without notice.
- Our liability is limited to the manufacturer's warranty in regards to defective goods, labour, or damage claims.
- Warranties may be void if product is not installed by a licensed professional.
- The purchaser acknowledges that the vendor does not have any knowledge or any control as to when, where or how the material on the face of
this quotation will be installed, or what the final use of the product will be.
2 of 2
NOTE: The images shown are for illustration purposes only and may not be an exact
representation of the product. Please discuss any questions or concerns with your
customer service representative. Sheret.com
CADET® PRO™ RIGHT HEIGHT®
ELONGATED TOILET
BARRIER FREE VITREOUS CHINA
CADET® PRO RIGHT HEIGHT®
ELONGATED TOILET
❑ 215AA004
• Features the Cadet ® Flushing System
• Vitreous china
• Low consumption (6.0 Lpf/1.6 gpf) toilet
• Trade exclusive tank
• PowerWash® rim scrubs bowl with each flush
• Robust metal trip lever & metal shank fill valve
• Includes EZ-Install Tools w/color match bowl caps
• EverClean® surface included
• 3" flush valve
• Fully-glazed 2-1/8" trapway
• 16-1/2" rim height for accessible applications
• 12" (305mm) rough-in
• Generous 9" x 8" water surface area
• Chrome finish trip lever is supplied
• 1,000g MaP Score** at 1.6 gpf
• 5 year warranty
FINISHED WALL
30-1/8"
(767mm)
❑ 3517A101 Right Height Elongated Bowl
®
8-7/8" 17-3/8"
(441mm)
1-1/16" (27mm)
(226mm)
❑ 4188A004 Tank
Nominal Dimensions:
18-1/2"
767 x 441 x 771mm (30-1/8" x 17-3/8" x 30-3/8") (470mm)
30-3/8"
C/L OF SEAT POST HOLES (771mm)
140mm (5-1/2" CENTERS)
Fixture only, seat and supply sold separately SUPPLY
AS
REQ'D
3-5/8" (92mm)
Alternative Tank Configuration Available: 14"
❑ 4188A054 Tank complete with Aquaguard Liner 16-1/2"
(419mm)
(356mm)
❑ 4188A064 Tank complete with tank cover *10"
(254mm)
locking device
❑ 4188A074 Tank complete with Aquaguard Liner
and tank cover locking device 7-7/16" 13-5/8" FINISHED 6"
❑ 4188A005 Tank complete with trip lever located (189mm)
12"
(347mm)
C/L OF OUTLET
FLOOR (152mm)
9-5/8"
on right side (305mm)
(244mm)
❑ 4188A065 Tank complete with tank cover locking
device and trip lever located on right side NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
Compliance Certifications -
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
Meets or Exceeds the Following Specifications:
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
China Fixtures assumed for use of superseded or voided pages.
** Maximum Performance (MaP) testing performed by MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
IAPMO R&T Lab. MaP Report conducted by Gauley ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
Associates Ltd. and Koeller and Company. BUILDING FACILITIES-CHECK LOCAL CODES.
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Seat: 5257A65MT Elongated Slow Closed Seat
and Cover
❏ Supply with stop:
© 2020 LIXIL Canada Inc.
3/20
CADET® PRO™ RIGHT HEIGHT®
ELONGATED TOILET
BARRIER FREE VITREOUS CHINA
CADET® PRO™ RIGHT HEIGHT®
ELONGATED TOILET
❑ 215AA.104
• Features the Cadet ® Flushing System
• Vitreous china
• High Efficiency Toilet (HET), ultra-low
consumption (4.8 Lpf/1.28 gpf), utilizes 20%
less water
• Meets EPA WaterSense ® criteria
• Trade exclusive tank
• PowerWash® rim scrubs bowl with each flush
• Robust metal trip lever & metal shank fill valve
• Includes EZ-Install Tools w/color match bowl caps
• EverClean® surface included
• 3" flush valve
• Fully-glazed 2-1/8" trapway
• 16-1/2" rim height for accessible applications
• 12" (305mm) rough-in
• Generous 9" x 8" water surface area
• Chrome finish trip lever is supplied
• 1,000g MaP Score** at 1.28 gpf
• 5 year warranty
❑ 215AA.105 Same as above except with trip FINISHED WALL
30-1/8"
lever on right side 8-7/8"
(767mm)
17-3/8"
❑ 3517A.101 Right Height ® Elongated Bowl (441mm)
1-1/16" (27mm)
(226mm)
❑ 4188A.104 Tank
Nominal Dimensions:
767 x 441 x 771mm (30-1/8" x 17-3/8" x 30-3/8") 18-1/2"
(470mm)
Fixture only, seat and supply sold separately C/L OF SEAT POST HOLES
30-3/8"
(771mm)
140mm (5-1/2" CENTERS)
Alternative Tank Configurations Available: SUPPLY
❑ 4188A.154 Tank complete with Aquaguard Liner AS
REQ'D
❑ 4188A.155 Tank complete with Aquaguard Liner
3-5/8" (92mm)
and trip lever located on right side 16-1/2"
14"
(356mm)
❑ 4188A.164 Tank complete with tank cover (419mm) *10"
locking device (254mm)
❑ 4188A.174 Tank complete with Aquaguard Liner
and tank cover locking device
❑ 4188A.105 Tank complete with trip lever located 7-7/16"
(189mm)
13-5/8"
(347mm)
FINISHED
FLOOR
6"
(152mm)
on right side 12" C/L OF OUTLET
9-5/8"
(244mm)
❑ 4188A.165 Tank complete with tank cover (305mm)
locking device and trip lever located on NOTES:
right side THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
Compliance Certifications - SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
Meets or Exceeds the Following Specifications: * DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of
tolerances established by ANSI Standard A112.19.2.
China Fixtures These measurements are subject to change or cancellation. No responsibility is
• US EPA WaterSense ® Specification for HETs assumed for use of superseded or voided pages.
** Maximum Performance (MaP) testing performed by MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
IAPMO R&T Lab. MaP Report conducted by Veritec ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
Consulting, Inc. and Koeller and Company. BUILDING FACILITIES-CHECK LOCAL CODES.
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Seat: #5321.110 EverClean ® Elongated Seat with
Slow Close Snap-Off Hinges
❏ Supply with stop:
Certified by
IAPMO R&T
K168
© 2013 AS America Inc. Rev. 6/13
A FFI N I TY ™ 1 2 00E 4
RESIDENTIAL PLASTIC TOILET SEAT
5-1/2˝
2-1/4˝
18-5/16˝
16-9/16˝ 8-1/8˝ to
18-13/16˝
11-11/16˝
14˝ 1˝
3/4˝
F EATU R ES: SPECIFICATION S:
● STA-TITE® Size: Elongated
Seat Fastening System™
Never Loosens™ Material: Plastic
● Easy•Clean & Change® Style: Closed Front with Cover
Removes for cleaning Ring Bumpers: Two
● Whisper•Close ®
Hinges: Plastic
Slowly and quietly closes
● Precision Seat Fit™ Hardware: STA-TITE® Seat Fastening System™
½˝ front-to-back adjustability
provides the perfect bowl fit
Codes & Standards:
● Super Grip Bumpers™
Provides greater stability
Proudly Made in the USA Eco-Friendly
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 | ToiletSeats.com | ph: 800.558.7651 | fx: 800.292.3647
Bemis Manufacturing Co. reserves the right to make revisions without notice to product specifications. ©2018 0B7012444A
CADET® PRO™
ELONGATED TOILET
VITREOUS CHINA
CADET® PRO™ ELONGATED TOILET
❑ 215CA.104
• Features the Cadet ® Flushing System
• Vitreous china
• High Efficiency Toilet (HET), ultra-low
consumption (4.8 Lpf/1.28 gpf), utilizes 20%
less water
• Meets EPA WaterSense ® criteria
• Trade exclusive tank
• PowerWash® rim scrubs bowl with each flush
• Robust metal trip lever & metal shank fill valve
• Includes EZ-Install Tools w/color match bowl caps
• EverClean® surface included
• 3" flush valve
• Fully-glazed 2-1/8" trapway
• 12" (305mm) rough-in
• Generous 9" x 8" water surface area
• Chrome finish trip lever is supplied
• 1,000g MaP Score** at 1.28 gpf
• 5 year warranty
❑ 3517C.101 Elongated Bowl
❑ 4188A.104 Tank
FINISHED WALL
Nominal Dimensions: 30-1/8"
(767mm)
767 x 441 x 733mm (30-1/8" x 17-3/8" x 28-7/8") 8-7/8" 17-3/8"
(441mm)
1-1/16" (27mm)
(226mm)
Fixture only, seat and supply sold separately
Alternative Tank Configurations Available:
❑ 4188A.154 Tank complete with Aquaguard Liner 18-1/2"
❑ 4188A.155 Tank complete with Aquaguard Liner (470mm)
and trip lever located on right side C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
❑ 4188A.164 Tank complete with tank cover 28-7/8" SUPPLY
locking device (733mm) AS
REQ'D
❑ 4188A.174 Tank complete with Aquaguard Liner
3-5/8" (92mm)
and tank cover locking device 15"
14"
(356mm)
❑ 4188A.105 Tank complete with trip lever located (381mm) *8"
(203mm)
on right side
❑ 4188A.165 Tank complete with tank cover
locking device and trip lever located on 7-7/16" 13-5/8" FINISHED 6"
right side (189mm) (347mm) FLOOR (152mm)
9-5/8"
12" C/L OF OUTLET (244mm)
(305mm)
Compliance Certifications -
Meets or Exceeds the Following Specifications: NOTES:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
China Fixtures SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
• US EPA WaterSense ® Specification for HETs * DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of
tolerances established by ANSI Standard A112.19.2.
** Maximum Performance (MaP) testing performed by These measurements are subject to change or cancellation. No responsibility is
IAPMO R&T Lab. MaP Report conducted by Veritec assumed for use of superseded or voided pages.
Consulting, Inc. and Koeller and Company.
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Seat: #5321.110 EverClean ® Elongated Seat with
Slow Close Snap-Off Hinges
❏ Supply with stop:
Certified by
IAPMO R&T
K174
© 2013 AS America Inc. Rev. 5/13
730SLEC
RESIDENTIAL PLASTIC TOILET SEAT
5-1/2˝
1-15/16˝
14-7/8˝ 8-3/8˝ 16-5/8˝
10-1/4˝
14-11/16˝ 15/16˝
11/16˝
F EATU R ES: SPECIFICATION S:
● Easy•Clean & Change® Size: Round
Removes for easy cleaning
Material: Plastic
● Whisper•Close®
Slowly and quietly closes Style: Closed Front with Cover
Ring Bumpers: Four
Hinges: Plastic
Hardware: Non-Corroding Bolts and Wing Nuts
Codes & Standards:
Proudly Made in the USA Eco-Friendly
Bemis Manufacturing Co., Sheboygan Falls, WI 53085 | ToiletSeats.com | ph: 800.558.7651 | fx: 800.292.3647
Bemis Manufacturing Co. reserves the right to make revisions without notice to product specifications. ©2018 0B7012477
