Instrumentation Process Control

Product Selection Guide

Enclosures

Ball

Pneumatic Valves Compression Fittings

Analytical Systems

Table of Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . 2 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . 4 Valves Ball/Plug Valves . . . . . . . . . . . . . . . . 6 Check Valves . . . . . . . . . . . . . . . . . . 8 Filters. . . . . . . . . . . . . . . . . . . . . . . . .10 Relief Valves . . . . . . . . . . . . . . . . . . .11 Bleed and Purge Valves . . . . . . . . . .12 Metering Valves . . . . . . . . . . . . . . . . .13 Needle Valves . . . . . . . . . . . . . . . . .14 Manifold Valves . . . . . . . . . . . . . . . . .16 Diaphragm Valves . . . . . . . . . . . . . . .18 Regulators Pressure Regulators . . . . . . . . . . . . 20 Back Pressure Regulators. . . . . . . . 22 Vaporizing Regulators . . . . . . . . . . . 23 Flow Controllers . . . . . . . . . . . . . . . . . .24 PFA/PTFE Products . . . . . . . . . . . . . . 25 Analytical Systems . . . . . . . . . . . . . . . 26 Hose/Tubing/Quick Couplings . . . . . . 28 Tools and Accessories . . . . . . . . . . . . 29 Sanitary and BioPharmaceutical . . . . 30

Instrumentation Group of Parker Hannifin

The Instrumentation Group of Parker Hannin is dedicated to being the global leader in the design, manufacture and distribution of high quality, critical ow and ultra high purity components for the Petrochemical, Chemical Processing, Oil and Gas, Power Generation, Water Analysis, Biopharmaceutical, Semiconductor Manufacturing and Analytical Equipment industries. With 11 manufacturing plants and over 300 authorized distributors worldwide we can provide local inventory and technical support to our customers anywhere in the world.

Parker Hannin Corp.

Parker Hannin is the worlds leading diversied manufacturer of motion and control technologies and systems, providing precision-engineered solutions for a wide variety of commercial, mobile, industrial and aerospace markets.

263 manufacturing sites around the world 8,200 distributors 400,000 customers 3,200 product lines Listed as PH on the NYSE

Valves Pressure Regulators

Premier Customer Service
The Instrumentation Group is driven to provide our customers with premier customer service through on time delivery of quality products and value added services such as the Verio Division Express Service Program, custom assemblies and selection safety and installation training.

Quick Couplings

Pipe Fittings

Heat Code Traceability

Parker Hannins Instrumentation Group offers Heat Code Traceability (HCT) to meet or exceed all applicable specications to assure our customers that they are working with a high quality product. It acts as an assurance for today and for tomorrow. These specications ensure high quality instrumentation components for use in fossil fuel power plants, chemical reneries, general instrumentation and processing plants. Requirements are now emerging in the semiconductor and pharmaceutical industries. Not only are the materials continuously monitored, but Parker adheres to a formal, documented Quality Assurance Program that controls manufacturing, marking, testing and examination procedures, cleaning and packaging. HCT is offered on the following quality stainless steel components:

Engineering Excellence
By remaining focused on our customers we have been able to introduce products that not only solve our customers business challenges but address specic industry needs and issues. Using the latest in virtual engineering tools, Parker Instrumentation engineers have reduced the time to develop, test and manufacture our latest product innovations. To assist our customers with their designs, our 2D and 3D CAD drawings are available online.

CPI and A-LOK Tube Fittings UltraSeal and VacuSeal Fittings Ball, Needle and Check Valves Instrumentation Pipe Fittings Orbital Tube Weld Fittings MiniButtweld Fittings Filters

Enclosures

Ball Fittings

Pneumatic Valves Compression Fittings

Parker Instrumentation Tube Fittings are designed as leak-free connections for process, power, and oil and gas instrumentation applications handling liquids, gases and chemicals. Parkers instrument tube ttings have been engineered and manufactured to consistently provide the highest level of reliability. However, no systems integrity is complete without considering the critical link, tubing. Proper tube selection and installation are key ingredients in building leak-free reliable tubing systems. Parker instrument ttings are designed to work on like materials therefore, stainless steel ttings should be used only with stainless steel tubing. The practice of mixing materials is strongly discouraged. The only exception is brass ttings with copper tubing. All working pressures have been calculated using the maximum allowable stress levels in accordance with ANSI B31.3.

Analytical Systems

CPI Fittings (Catalog 4230/4233)

Three piece simple design to work on all instrumentation grade tubing Molybdenum Disulde coated nuts to prevent galling and provide lubrication Single ferrule system treated with Suparcase technology to insure sealing Superior body seat surface nish to seal gases and liquids Single ferrule technology to provide excellent anti-vibration performance Excellent in high thermo cycling applications

A-LOK Fittings (Catalog 4230/4233)

Industry standard design for all instrumentation grade tubing Silver coated threads to reduce galling Back ferrule is treated with Suparcase technology to provide a strong mechanical grip on the tube Industry double ferrule design for system specications

Valves Pressure Regulators

Quick Couplings

Pipe Fittings

MPI Fittings (Catalog 4234)

Compression tting for medium pressure applications up to 15,000 psi (1034 bar) Inverted body and nut design for added strength with thick-wall tubing Longer thread area for improved performance and resistance to vibration Molybdenum Disulde coated nuts to prevent galling and for higher temperature applications Installation and rework time reduced by 50%

Phastite (Catalog 4235-PH)

Option for welded systems Simple assembly process provides high integrity connections, rst time every time Installation time reduced to seconds No loose parts, supplied factory pre assembled Permanent push t tube connector with working pressures up to 13,300 psi (917 bar)

Instrumentation Pipe Fittings (Catalog 4260)

Manufactured from 316 stainless steel for superior corrosion resistance Available with NPT and ISO thread congurations All exposed threads protected to prevent damage All pipe threads meet ANSI B1.20.1 requirements

Welded Fittings (Catalog 4280)

Available in socketweld, buttweld and automatic buttweld connections Manufactured to meet ASME Section III, and ANSI B31.1 and B31.7 codes Permanent, leak free connection For critical applications and high temperatures such as steam

Fitting CPI A-LOK MPI Phastite Weld-lok Pipe Pipe Adapters

Working Pressure Instrumentation Tubing* Instrumentation Tubing* Up to 15,000 psi (1034 bar) Up to 13,300 psi (917 bar) Instrument Tubing* Up to 6000 psi (414 bar) Up to 6000 psi (414 bar)

Connection Type Single ferrule compression Double ferrule compression Inverted compression Permanent crimp* Tube Socket Weld NPT Pipe Thread NPT, BSPT, and BSPP Pipe Threads

Size Range 1/16" - 2" Tube Diameter 1/16" - 2" Tube Diameter 1/4" - 1" Tube Diameter 1/4" - 1/2" 1/8" - 2" Tube Diameter 1/16" - 2" Pipe Size 1/8" - 1"

*Maximum suggested working pressure as indicated in Instrument Tubing Selection Guide Bulletin 4200-TS.

Enclosures

Valves

Ball

Pneumatic Valves Compression Fittings

Ball/Plug Valves
Parker ball and plug valves, with excellent temperature and pressure characteristics, are well established for power, process and instrumentation applications as on/off/diverter or selector valves. Options include lockout devices and round, stainless steel or T-bar handles. Cleaning options include O2, high purity and grade A. Available with CPI, A-LOK, male and female NPT, UltraSeal and VacuSeal end connections.

Analytical Systems

MB Series (Catalog 4121-MB)

One piece compact barstock design Center off position for 3-way 2-way, inline, angle; 3-way, 4-way and 5-way Patented seat design Standard drop-in replacement

B Series (Catalog 4121-B)

2-way, 3-way diverting or spring loaded 3-way selector designs Wide temperature application range -65F (18C) to +450F (232C) Rated for up to 6000 psi (413.7 bar) Widest variety of seats, seals and port connections Connections include CPI, A-LOK, male and female NPT, UltraSeal and VacuSeal

SWB Series (Catalog 4125-SWB)

Zero clearance body allows repairs in eld Spring loaded seats and stem seals Fully enclosed body bolts ISO-type actuator mounting design Available up to 1" full ow design

HB Series (Catalog 4121-HB)

Compact FNPT version for tight work areas Full operating pressure in any port PEEK trunnion bearings provide high cycle life 10,000 psi (689 bar) rating with PEEK seats Excellent for CNG

Valves Pressure Regulators

Quick Couplings

Pipe Fittings

MPB Series Ball Valve (Catalog 4234)

2-way and 3-way ball valve for severe service applications Designed for 1/4 and 1/2 turn media shutoff or switching applications

PR Series (Catalog 4126-PR)

Low operating torque Optional locking device, downstream vent and metal tee handles Typically used in laboratories Most compact 90 actuated valve

Pneumatic/Electric Actuators (Catalog 4123)

60 Series pneumatic actuators provide 90 and 180 rotation in both double acting and spring return models 70 and 80 Series electric actuators provide 90 and 180 actuation for our B, MB, HB, SWB series ball valves.

HBV Series (Catalog 4190-HV)

Suitable for the most demanding applications in the oil, gas and process control industries Integral compression ends available, eliminating taper threads and thread sealants True two piece design reduces body leakage paths Complies with ANSI/ASME B16.34 requirements where applicable

Temperature

Cv Body Material Stainless Steel

Actuation Buna-N Rubber

Seat/Seal Material Ethylene Propylene Rubber Highly Fluorinated Fluorocarbon Fluorocarbon Rubber

End Connection Size Range

Pneumatic

Valve Groups

Model Product Series Description Mini Barstock MB Ball Valve B SWB

Ball/Plug Valves

HB MPB PR HBV

Maximum Operating Pressure 3000 psi 207 bar 6000 psi Ball Valve 414 bar Swing Out Ball 2500 psi Valve 172 bar 10000 psi Ball Valve 690 bar Med. Pressure 20000 psi Ball Valve 1379 bar 3000 psi Plug Valve 207 bar 6000 psi Ball Valve 414 bar

GRAFOIL

Electric

Manual

PCTFE

Brass

PEEK

Min -65 F -54 C -65 F -54 C -65 F -54 C -65 F -54 C -10 F -23C -10 F -23C -65 F -54 C

Max 300 F 149 C 400 F 204 C 600 F 316 C 400 F 204 C 400 F 204 C 400 F 204 C 450 F 232 C

Max 11.00 6.40 35.00 1.00 8.80 3.20

PTFE x x x

Alloy

PFA

x x

x x x x x x

x x x x x

x x x x x

x x x x x x x x x x x x x x x x x x x x x x x x x

x x x x x x

x x x x x

Min Max Catalog 1/16 in 3/4 in 4121-MB 3mm 12mm 1/16 in 3/4 in 4121-B 3mm 12mm 1/4 in 1 in 4125-SWB n/a mm n/a mm 1/4 in 1/2 in 4121-HB 6mm 12mm 1/8 in 1 in 4234 n/a mm n/a mm 1/8 in 1/2 in 4126-PR 3mm 12mm 1/8 in 1 in 4190-HBV 6mm 25mm

Enclosures

Valves

Ball

Pneumatic Valves Compression Fittings

Parker check valves are designed for uni-directional ow control of uids and gases in industries such as chemical processing, oil and gas production and transmission, pharmaceutical, pulp and paper, power and utilities.

Analytical Systems

Check Valves

C Series (Catalog 4130-C)

Resilient, custom molded, seat design Back stopped poppet to minimize spring stress Cracking Pressures: 13, 1, 5, 10, 25, 50, 75 and 100 psi (.023, .069, .345, .69, 1.72, 3.45, 5.17, 6.9 bar) Port connections include male and female NPT, CPI, A-LOK, UltraSeal , VacuSeal , BSP, SAE and Seal-Lok

CO Series (Catalog 4130-CO)

Suitable for applications requiring high integrity leak rates and re-sealing capabilities Seal integrity to 4 x 10 -9 std. atm-cc/sec Back stopped poppet to minimize spring stress Cracking Pressures: 13, 1, 5, 10, 25, 50, 75 and 100 psi (.023, .069, .345, .69, 1.72, 3.45, 5.17, 6.9 bar) Available with highly uorinated uorocarbon rubber Only check valve with published helium leak rate

CB Series (Catalog 4130-CB)

Reduces maintenance while improving performance requirements on dual fuel turbines Cracking Pressures: 1, 5, 10, 25, 50, 75, 100 and 120 psi (.023, .069, .345, .69, 1.72, 3.45, 5.17, 6.9, 8.27 bar) Rugged ball design for demanding applications For high temperatures with highly viscous media

MPC Series (Catalog 4234)

Variety of elastomeric poppet seals 5 psi (.345 bar) cracking pressure MPI, cone & thread and female NPT connections available For pressures up to 20,000 psi (1379 bar)

Valves Pressure Regulators

Quick Couplings

Pipe Fittings

MPCB Series (Catalog 4234)

Metal to metal seat for use in applications that cannot accept uorocarbon rubber 5 psi (.345 bar) cracking pressure MPI, cone & thread and female NPT connections available For pressures up to 20,000 psi (1379 bar)

LC Series (Bulletin 4130-LC)

For extreme temperature applications The gravity assisted poppet uses reverse ow to achieve a seal to within 99.9% of forward ow

Temperature

Cv

Cracking Pressure

Body Material

Seal Material Fluorocarbon Rubber Ethylene Propylene Rubber Highly Fluorinated Fluorocarbon Neoprene Rubber

End Connections

Stainless Steel

Valve Groups

Model Series C CO

Check Valves

CB MPC MPCB LC

Maximum Operating Pressure 6000 psi 414 bar 6000 psi 414 bar 3000 psi 207 bar 20000 psi 1379 bar 20000 psi 1379 bar 6000 psi 414 bar

Buna-N Rubber

Parkerll/ Parkercarbon

Metal

Brass

PTFE

Min -65 F -54 C -15 F -26 C -65 F -54 C -10 F -23C -100 F -73 C -100 F -73 C

Max 400 F 204 C 400 F 204 C 450 F 232 C 400 F 204 C 600 F 316 C 900 F 482 C

Max 6.70 2.70 6.00

Max 100 psi 6.9 bar 100 psi 6.9 bar 120 psi 8.27 bar 5 psi .345 bar 5 psi .345 bar

x x x x x x x

x x

x x

x x

x x

Min 1/8 in 3 mm 1/4 in 6mm 3/8 in 1/4 in

Max 1 in 25 mm 1/2 in 12mm 3/4 in 1 in 1 in 1/2 in

Catalog 4130-C 4130-CO 4130-CB 4234 4234 4130-LC

x x x

1/4 in 1/8 in

2.30

Enclosures

Valves
Filters

Ball

Pneumatic Valves Compression Fittings

For protection of instrumentation systems from undesirable materials such as dirt, chips, scale and other foreign particles. Options include Oxygen and special cleaning, bypass and integral compression ported bypass.

Analytical Systems

F Series (Catalog 4130-F)

Replaceable sintered 316 stainless steel lter element Optional 250 and 450 micron wire cloth lter elements

FT Series (Catalog 4130-FT)

Filter elements are easily replaced without disconnecting the tube lines Fast Loop bypass option enables a continuous self cleaning ow Replaceable sintered 316 stainless steel lter element Optional 250 and 450 micron wire cloth lter elements

MPF Series (Catalog 4234)

High pressure applications up to 20,000 psi (1379 bar) Sintered 316 stainless steel lter disc Inline lters help protect valuable equipment in the process system MPI, cone & thread and female NPT connections available

Temperature

Cv

Body Material Stainless Steel Buna-N Rubber Fluorocarbon Rubber

Seal Material Ethylene Propylene Rubber Highly Fluorinated Fluorocarbon Neoprene Rubber

End Connections

Valve Groups

Model Series F

Filters

FT MPF

Maximum Operating Pressure 6000 psi Inline Filter 414 bar 6000 psi Tee Filter 414 bar Medium 20000 psi Pressure Filter 1379 bar Product Description

Min -65 F -54 C -100 F -73 C -10 F -23C

Max 400 F 204 C 900 F 482 C 400 F 204 C

Max 3.40 2.50 0.59

Micron Range .5 to 500 .5 to 500 .5 to 100

Silver Plated Nickel Alloy

Brass

PTFE

x x

x x x

x x

x x

x x x

x x

x x x x

Min 1/8 in 3mm 1/8 in 6mm 1/4 in

Max 1 in 25mm 1/2 in 12mm 9/16 in

Catalog 4130-F 4130-FT 4234

10

Valves Pressure Regulators

Relief Valves
RL4 Series (Catalog 4131-RL)
Handle for eld maintenance Externally adjustable pressure settings while valve is in operation Seven different springs

Quick Couplings

Pipe Fittings

Manual override option with positive stem retraction is available for the full working pressure range Color coded springs and labels indicate spring cracking range

RH4 Series (Catalog 4131-RH)

Eight springs Manual override option with positive stem retraction is available for pressures up to 1500 psi (103 bar) Preset from factory and comes with standard springs

Temperature

Cv

Body Material Ethylene Propylene Rubber Stainless Steel Buna-N Rubber

Seal Material Highly Fluorinated Fluorocarbon Neoprene Rubber Fluorocarbon Rubber

End Connections

Valve Groups

Model Series RL

Relief Valves

RH MPRA

Maximum Operating Pressure 400 psi 28 bar 6000 psi 414 bar 20999 psi 1448 bar

Min -70 F -57C -70 F -57C -10 F -23C

Max 400 F 204 C 400 F 204 C 400 F 204 C

Max 0.8 0.4 0.7

x x x

x x x

x x x

x x x

x x x

x x

Min 1/4 in 6mm 1/4 in 6mm 1/2 in n/a

Max 1/4 in 8mm 1/4 in 8mm 9/16 in n/a

Catalog 4131-RL 4131-RH 4234

11

Enclosures

Valves

Ball

Pneumatic Valves Compression Fittings

Analytical Systems

Bleed and Purge Valves

BV Series (Catalog 4133-BP)
Recommended for use in bleeding hydraulic systems Valve vents line pressure to atmosphere or to containment Multi-valve manifolds or gauge/root valves

PG Series (Catalog 4133-BP)

Vent hole in the cap bleeds, drains or purges system pressure Optional PTFE ball requires only nger-tight torque to achieve a leak-tight seal Crimped cap ensures safe relief of system pressures

Valve Groups

Model Series BV

Bleed and Purge Valves

PG MPBV

Maximum Operating Pressure 10000 psi 690 bar 4000 psi 276 bar 30000 psi 2068 bar

Temperature Min -65 F -54 C -65 F -54 C -10 F -23C Max 850 F 454 C 400 F 204 C 400 F 204 C

Cv 0.1 x x Brass

Body Material Stainless Steel x x x

End Connections Alloy x x Min 1/4" 1/8" 9/16" Max 1/2" 1/2" 9/16" Catalog 4131-BP 4131-BP 4234

12

Valves Pressure Regulators

Metering Valves
N Series (Catalog 4170-N)
Panel or in-line mounting Angle or in-line patterns

Quick Couplings

Pipe Fittings

Valve stem threads not in contact with process uid

HR Series (Catalog 4170-HR)

Bubble tight shut-off capability High resolution metering valve with limited hysteresis Seven optional valve stem tapers

Temperature

Cv

Body Material

Seat Material Fluorocarbon Rubber Ethylene Propylene Rubber Highly Fluorinated Fluorocarbon Neoprene Rubber

End Connections

Stainless Steel

Valve Groups

Model Series NS

Metering Valves

NM NL HR

Maximum Operating Pressure 2000 psi 138 bar 1000 psi 69 bar 1000 psi 69 bar 250 psi 17 bar

Buna-N Rubber

Brass

Min -50 F -46 C -50 F -46 C -50 F -46 C -50 F -46 C

Max 400 F 204 C 400 F 204 C 400 F 204 C 400 F 204 C

Max 0.040 0.100 0.200 0.100

x x x x

x x x x

x x x x

x x x x

x x x x

x x x x

x x x x

Min 1/16 in 3mm 1/8 in 3mm 1/8 in 6mm 1/16 in 3mm

Max 1/4 in 6mm 1/4 in 6mm 3/8 in 1/4 in 6mm

Catalog 4170-N 4170-N 4170-N 4170-HR

13

Enclosures

Valves

Ball

Pneumatic Valves Compression Fittings

Analytical Systems

Needle Valves
V Series (Catalog 4110- V)
For positive leak tight shut-off and regulation of uids Choice of three stem types Wide variety of size and end connections

SN6 Series (Catalog 4110-SN)

Provides shut-off and coarse regulation of liquids and gases Choice of two stem types In-line and angle patterns Ideal cylinder valve

VQ Series (Catalog 4110-VQ)

In-line and angle patterns Panel mountable Color-coded handles Quick actuation for low pressure applications

NP6 Series (Catalog 4110-NP)

Choice of two non-rotating stem types Packing below power threads Panel mountable Fracture resistant nylon handle

PV Series (Catalog 4110-PV)

Roddable, straight through ow path Gauge port option Bonnet lock plate resists accidental bonnet disengagement PEEK , Acetal, PFA seat materials available

U Series (Catalog 4110-U)

Stem packing below the threads isolates the thread lubricant from the ow Severe service applications Panel mountable Ideal for steam blowdown

14

Valves Pressure Regulators

Quick Couplings

Pipe Fittings

HNV Series (Catalog 4190-HV)

Compact needle valves For applications up to 10,000 psi (690 bar) Available with integral A-LOK or CPI connections, reducing leak paths and reducing installation costs Soft tipped optional seating available for gaseous applications

RPV Series (Catalog 4190-HV)

For uids containing high levels of contamination frequently found in oil and gas processing facilities Straight through ow pattern, roddable design 100% repeatable bubble tight shut off

HGV Series (Catalog 4190-HV)

Up to 10,000 psig (690 barg) Compact single and multi port gauge valves Soft tipped optional seating available for gaseous applications

Temperature

Cv

Body Material

Actuation

Seat/Seal Material Ethylene Propylene Rubber Highly Fluorinated Fluorocarbon Fluorocarbon Rubber

End Connections

Stainless Steel

Buna-N Rubber

Silicon Rubber

Pneumatic

Valve Groups

Model Series V SN6 VQ NP6 PV U

Needle Valves

MPN MPGV HNV HRPV HGV HVG HYNV

Maximum Operating Pressure 6000 psi 414 bar 6000 psi 414 bar 300 psi 21 bar 6000 psi 414 bar 6000 psi 414 bar 6000 psi 414 bar 20000 psi 1379 bar 30000 psi 2068 bar 10000 psi 690 bar 10000 psi 690 bar 10000 psi 690 bar 6000 psi 414 bar 10000 psi 690 bar

GRAFOIL

Manual

PTFE

Alloy

Min -65 F -54 C -65 F -54 C -20 F -29 C -70 F -57 C -20 F -29 C -65 F -54 C -65 F -54 C -10 F -23C -65 F -54 C -65 F -54 C -65 F -54 C -65 F -54 C -65 F -54 C

Max 450 F 232 C 450 F 232 C 200 F 93 C 700 F 371 C 400 F 204 C 1200 F 649 C 800 F 427 C 400 F 204 C 1000 F 538 C 1000 F 538 C 1000 F 538 C 1000 F 538 C 1000 F 538 C

Max 1.30 0.30 0.80 0.60 2.00 2.70

x x x x x x x x

x x x x x x x x x x

x x x x

x x

Min 1/8 in 3mm 1/4 in 1/8 in 3mm 1/4 in 6mm 1/4 in 1/8 in 6mm 1/4 in 9/16 in

Max 3/4 in 12 1/4 in 1/2 in 10mm 3/8 in 8mm 3/4 in 1 in 25mm 1 in 9/16 in 1/2 in 12mm 1/2 in 12mm 1/2 in 12mm 1/2 in 12mm 1/2 in 12mm

Catalog 4110-V 4110-SN 4110-VQ 4110-NP 4110-PV 4110-U 4234 4234 4190-HV 4190-HV 4190-HV 4190-HV 4190-HV

x x x

x x x

x x x

x x x x x x x

x x x x x x x x x x x

0.35 1.80 0.35 0.35 0.35

x x x x x

x x x x

x x x x

x x x x x

1/4 in 6mm 1/4 in 6mm 1/4 in 6mm 1/4 in 6mm 1/4 in 6mm

15

Enclosures

Valves

Ball

Pneumatic Valves Compression Fittings

Analytical Systems

Manifold Valves
CCIMS (Catalog 4190-CCIMS)
Close coupled solution for ow measurement applications Reductions in installation time of up to 75% Reductions in connections and leak paths of up to 85% Features phastt for rapid transmitter removal and connection

Monoange (Catalog 4190-FP)

Compact double block and bleed valves, featuring needle valves Reducing installations cost while improving safety through a reduction in leak paths Congurable options include single block, double block and double block and bleed Available in a range of materials including carbon steel, stainless steel, duplex, alloy 625

Pro-Bloc (Catalog 4190-FP)

Compact double block and bleed valves, featuring needle or ball valve options Reducing installations cost while improving safety through a reduction in leak paths Congurable options include single block, double block and double block and bleed Available in a range of materials including carbon steel, stainless steel, duplex, alloy 625

16

Valves Pressure Regulators

Quick Couplings

Pipe Fittings

H-Series (Catalog 4190-PM/4190-FM)

A comprehensive range of 2, 3 and 5 valve manifolds for ow applications Available with integral PTFree connections, reducing leakpaths and installation cost Available in stainless steel and many exotic alloys, including Hastalloy, 6Mo, MONEL, and alloy 625

Hi-Pro Series (Catalog 4190-HBM)

A complete range of ball valves 10mm ball and needle valve manifolds Including block and bleed, and double block and bleed manifold options Working pressures up to 10,000 psi (690 bar) Available with integral A-LOK or CPI connections, reducing leak paths and installation costs

Temperature

Body Material Stainless Steel Carbon Steel

Packing GRAFOIL

Seat/Tip

End Connection Size Range

Valve Groups

Model Series MF PB H2

Manifolds

H3 H5 HBM

Product Description double block and bleed double block and bleed 2 valve manifolds - needle style 3 valve manifolds - needle style 5 valve manifolds - needle style 2 & 3 valve manifolds ball style

Maximum Operating Pressure ANSI 2500 API 10,000 ANSI 2500 API 10,000 10,000 psi 689 bar 10,000 psi 689 bar 10,000 psi 689 bar 6000 psi 414 bar

PEEK

PCTFE

316SS

PTFE

PTFE

Alloy

Min -65 F -54 C -65 F -54 C -65 F -54 C -65 F -54 C -65 F -54 C -65 F -54 C

Max 1000 F 538 C 450 F 232 C 1000 F 538 C 1000 F 538 C 1000 F 538 C 450 F 232 C

Cv

x x 0.35 1.80 0.35

x x x x x x

x x x x x x

x x x x x x

x x x x x x

x x

x x x x x x

x x x

x x x x

Min 1/4 in 6mm 1/4 in 6mm 1/4 in 6mm 1/4 in 6mm 1/4 in 6mm 1/4 in 6mm

Max 1/2 in 12mm 1 in 25mm 1/2 in 12mm 1/2 in 12mm 1/2 in 12mm 1/2 in 12mm

Catalog 4190-FP 4190-FP 4190-PM 4190-FM 4190-FM 4190-HBM

17

Enclosures

Valves

Ball

Pneumatic Valves Compression Fittings

Analytical Systems

Diaphragm Valves
NOVA Series (Catalog 4515)
General purpose, high cycle, compact valve For regulator outlet valve, gas control panels and analyzer sampling system applications

www.parker.com/veriflo

Handwheel, lever, and indicating handwheel options

NOVAAOP (Catalog 4515)

General purpose, high cycle, compact valve For gas control panels and analyzer sampling system applications Normally open and normally closed Various actuation pressures available

NV55 (Catalog 4515)

General purpose, high ow compact valve For owing large volumes of corrosive and non-corrosive uids

18

Valves Pressure Regulators

Quick Couplings

Pipe Fittings

944AOPHPNCSP (Catalog 4515)

High pressure air operated valve Reliable, accurate performance Opening function incorporates hydraulics

16 Series (Catalog 4515)

High pressure valve for gas manifold/box systems 316L SST machined body design Metal-to-metal diaphragm seal Packless valve design

Temperature Maximum Operating Pressure 250 psig 17 barg 125 psig 9 barg 250 psig 17 barg 3500 psig 241 barg 3000 psig 207 barg

Cv

Body Material Stainless Steel

Actuation Pneumatic Manual

Brass

Valve Groups

Model Series NOVA Series NOVAAOP

Diaphragm Valves

NV55 944AOPHPNCSP 16 Series

Product Description Diaphragm Springless Diaphragm Springless Diaphragm Springless Diaphragm Springless Diaphragm Spring

Min -15 F -26 C -15 F -26 C -15 F -26 C -40 F -40 C

Max 150 F 66 C 150 F 66 C 150 F 66 C 150 F 66 C

0.1 x x

0.3

0.6

Alloy

Catalog 4515

x x x x x

x x x x x

x x

x x x x x x x

4515 4515 4515 4515

19

Enclosures

Ball Regulators

Pneumatic Valves Compression Fittings

Analytical Systems

Pressure Regulators
NPR4100 (Catalog 4511)
Negative pressure regulation Internally threadless design Convoluted Hastelloy C-22 diaphragm

www.parker.com/veriflo

For delivery of low pressure gases from liquid sources White knob indicates negative pressure

IR4000 Series (Catalog 4511)

Internally threadless design Convoluted Hastelloy C-22 diaphragm Integral diaphragm stops prevent oil canning Seals available for nitrous oxide and hydrocarbon applications Low dead volume General purpose for instrument/ analyzer and semiconductor applications

IR5000 Series (Catalog 4511)

Internally threadless design Large convoluted Hastelloy C-22 diaphragm Greater sensitivity for precise pressure control For analyzer system gas management and instrument calibration

HFR900 (Catalog 4511)

High ow regulator Self-contained replaceable valve seat For corrosive and noncorrosive uid applications

20

Valves Pressure Regulators

Quick Couplings

Pipe Fittings

IR6000 Series (Catalog 4511)

Dual stage regulator Internally threadless design Convoluted Hastelloy C-22 diaphragm Virtually eliminates supply pressure effect Provides cylinder gas pressure reduction in reneries, process analytical systems and specialty gases

APR66 (Catalog 4511)

High pressure piston sensing regulator Low actuating torque Pressures up to 6000 psig (413.7 barg)

Quantum 959 (Catalog 4511)

Tied diaphragm design to minimize regulator creep Internally threadless design Metal to metal diaphragm seal

DM3000 (Catalog 4518)

Miniature pressure regulator for gas instrumentation applications ANSI/ISA SP76.00.02 modular surface mount interface No threads in wetted area Critically dampened to improve ow stability Faster purge times

Pressure Regulator Groups Model Series NPR4100 IR4000 IR5000 Single Stage HFR900 APR66 Quantum 959 DM3000 Maximum Maximum Outlet Inlet Pressure Pressure Min 250 psig -26 in Hg to 10 psig 0.02 17 barg -1.8 in Hg to .7 barg 4000 psig 500 psig 0.02 276 barg 34 barg 3500 psig 250 psig Sensitive 0.02 241 barg 17 barg 500 psig 150 psig High Flow 0.85 34 barg 10 barg High 6000 psig 6000 psig 0.04 Pressure 414 barg 414 barg Tied 3500 psig 150 psig 0.04 Diaphragm 241 barg 10 barg Type Absolute Pressure General Purpose Surface Mount

Cv Max 0.15 0.15 0.15 0.85 0.04 0.20 316L SS x x x x x x x

Body Material Brass x x Hastelloy Min C-22 MONEL FNPT x x x x x x x x 1/8" 1/8" 1/8" 1/4" 1/8" 1/4"

Connections Max Face Seal FNPT Compression or Tube Catalog 3/8" 3/8" 1/2" 1/2" 1/4" 1/4" x x x x x 4511 4511 4511 4511 4511 4511 4518

21

Enclosures

Ball Regulators

Pneumatic Valves Compression Fittings

Analytical Systems

Back Pressure Regulators

ABP1 (Catalog 4510)
Reduce contamination and accurately control back pressure Internally threadless design

www.parker.com/veriflo

Convoluted Hastelloy C-22 diaphragm Integral diaphragm stop

ABP3 (Catalog 4510)

Internally threadless design Provides sensitive pressure adjustments Large convoluted Hastelloy C-22 diaphragm Integral diaphragm stop

BPR50 (Catalog 4510)

For use with corrosive and non-corrosive uids Adjustable from 100 psi (6.7 bar) to 2000 psi (138 bar) Piston sensed high pressure back pressure regulator

Pressure Regulator Groups Model Series ABP1 Back Pressure ABP3 BPR50 Type General Purpose Sensitive High Pressure Maximum Inlet Pressure Up to 500 psig 34 barg Up to 60 psig 4 barg Up to 2500 psig 172 barg Min 0.06 0.06 0.45

Cv Max 0.30 0.30 0.45 316L SS X X X

Body Material Hastelloy C-22 X X Monel X

Connections Min FNPT 1/8" 1/8" 1/4" Max FNPT 1/4" 1/4" 1/4" Catalog 4510 4510 4510

22

Valves Pressure Regulators

Quick Couplings

Pipe Fittings

Vaporizing Regulators
AVR3 (Catalog 4512)
Steam heat design Field serviceable heat transfer element

www.parker.com/veriflo

Internally threadless design Internal liquid volume only .5cc Convoluted Hastelloy C-22 diaphragm

AVR4 (Catalog 4512)

Electrical heat design Field serviceable heat transfer element CSA, Cenelec, and ATEX certied Internally threadless design 120v or 240v, 50/60 Hz Convoluted Hastelloy C-22 diaphragm

Pressure Regulator Groups Vaporizing Regulators AVR4 Model Series AVR3 Type Steam Heated Electrically Heated Maximum Inlet Pressure 4000 psig 276 barg 4000 psig 276 barg Maximum Outlet Pressure 500 psig 34 barg 500 psig 34 barg Min 0.06 0.06

Cv Max 0.06 0.06

Body Material 316L SS X X MONEL X X

Connections Min FNPT 1/8" 1/8" Max FNPT 1/8" 1/8" Catalog 4512 4512

23

Enclosures

Flow

Pneumatic Ball Valves Compression Fittings Controllers

Analytical Systems

www.parker.com/porterinstrument Porter Instrument specializes in the design and manufacture of precision instruments for the measurement and control of low ow gases and liquids.

Gas Mass Flow Controllers (Catalog FM-441)

Responds to a step change in setpoint in less than one second Actual ow is stabilized within 2 seconds, virtually without overshoot Models available with ow ranges of 0-5 sccm to 0-1000 slpm N2 High pressure models have operating pressures to 3000 psig (207 barg)

Digital Liquid Mass Flow Controllers (Bulletin FM-998)

Thermal measurement system yields accurate measurement with less than a 5C increase in uid temperature Exclusive control circuitry, combined with a piezoelectric-actuated control valve, provides fast, stable control at low ow rates

Flowmeters (Catalog FM-1058)

Variable area owmeters include 65mm and 150mm scale length tube assemblies Available in either forged body or side-plate construction Interchangeable ow tube assemblies and valves allow conguration changes without removal from process system

Instrument Pressure Regulators (Catalog FM- 1057)

All models are direct acting, non-relieving and are cleaned for analytical instrument service Designed specically to provide high resolution control at the low ow rates typical in instrumentation applications Available with special port locations, manifold mount congurations, or with the regulator integrated into a larger, multi-functional package

24

Valves Pressure Regulators PFA/PTFE Products

Fluoropolymer Components
www.parker.com/partek (Catalog PSM Partek) Durable, leak free Partek products are used in a variety of industries, including semiconductor manufacturing, chemical/food/pharmaceutical/biomedical processing, as well as analytical instrumentation. Partek uoropolymer products are recommended for applications that encounter pressures below 120 psig (8.27 barg), and corrosive media at temperatures up to 400F (204C). Fluoropolymer valves and ttings offer corrosion protection and are used to ensure media/system purity. The wetted surfaces of all products are of chemically inert corrosion resistant PFA or PTFE. Partek products are available from 18" up to 1" in size.

Quick Couplings

Pipe Fittings

Parare PFA Tube Fittings: Parare ttings provide

low dead volume, which decreases the possibility of particle entrapment and bacterial growth.

Pargrip PFA Tube Fittings: Perfect for applications where ease of assembly is a requirement. Grooved tubing is not required. Parbond PFA Fusible Pipe Fittings: Parbond
ttings welded design eliminates threaded connections and entrapment areas and creates a leak free connection.

PFA Pipe Fittings: Available in a variety of congurations, all with standard NPT threads.

PFA Valves, Gauge Protectors, Thermocouple Fittings and Spray Guns: High cycle life, all
uoropolymer construction, with application tested and proven designs.

PTFE Valves, Regulators, and Flowmeters:

Wetted areas are manufactured from uoropolymer material which offers unmatched corrosion protection and high cycle life.

25

Enclosures

Pneumatic Ball Valves Compression Fittings Analytical Systems

Our chemical/petrochemical process analytical systems provide a sound model for both North American and European markets, adapting with minor modications to environmental segments, as well as laboratory and pilot plant markets. They also serve as a basis for power and pharmaceutical analytical segments. No other single supplier can offer a more complete, advanced, or adaptable sample analysis system.

Analytical Systems

Vent Recovery Panel (Bulletin 4141-VR)

Pre-engineered compact instrument panel that includes ttings, valves, stream switching valve, regulators, and gauges System adjusts for variations in gas supply pressures and ows

Vent Master (Catalog 4142-VM)

Pre-engineered compact instrument panel that includes regulators, gauges, rotometer, an eductor and a separate pressure controller Creates a stable pressure within the analyzer shelter vent header system Provide analysis accuracy with .06% over a vent header ow of 0-18SLPM

26

Valves Pressure Regulators

Quick Couplings

Pipe Fittings

IntraFlow (Catalog 4250)

Modular instrument system ISA/ANSI SP 76.00.02 compliant Every component is upgradeable to Gen 2 & 3 NeSSI Technologies Vacuum to 500 psig (34 barg) System design software available

R-max (Catalog 4140-R)

Surface mount technology for stream switching valves Low internal volume to reduce system purge time Low pressure actuation of valves-40 psig (-2.76) Rated from vacuum to 500 psig (34 barg)

ChangeOver System (Catalog 4511)

Compact turnkey module designed for continuous gas management Optional outlet regulator to control application specic outlet pressure Aluminum panel is standard Audio/visual alarm annunciator available Available in 316L stainless steel and brass Suitable for oxygen service

27

Enclosures

Pneumatic Ball Valves Compression Fittings Hose/Tubing/Quick Couplings

Push-Lok Hose (Bulletin 4281-B1-US)
Unique seal ensures reliability and durability for clean-environment use No clamps or special tools required for installation Inner liner is an extruded, synthetic rubber, resistant to petroleum-base oil, air and water

Analytical Systems

Quick Couplings (Catalog 4220)

Spill-free designs virtually eliminate uid loss upon disconnection and minimize air inclusion during connection Minimize air inclusion during connection Double shut-off ush mating valves suitable for seal off media in corrosive applications Working pressures from 300 psi (21 bar) to 5,000 psi (3445 bar)

Stainless Steel Metal Hose (Catalog 4690-MH)

For extreme conditions where other hoses fail For temperatures up to 1,500F (816C) Frequently used for the conveyance of liquid nitrogen Provides the lowest permeation rate of any hose available

Multitube Instrument and Heat Trace Tubing

(Catalog 4200-M-1)
Available in a variety of congurations For containment, transmission and control of pneumatic signals, gases and liquids Materials include copper, stainless steel, metal alloys and PFA/PTFE

28

Valves Pressure Regulators Tools and Accessories

Quick Couplings

Pipe Fittings

Tube Fabrication Equipment (Catalog 4290)

High quality hand benders, tube cutters, deburr tools and preset tools Tube benders from 1 8" to 1" size Tube cutter rated for 316 stainless steel tubing Par-Lok wrenches with 360 snap-action for exibility Preset installation kits for assembling tube ttings in close spaces

Sample Cylinders (Catalog 4160-SC)

1800 psig (124 barg) DOT rated sample cylinders Stainless steel construction ANSI/ASME B1.20.1 internal pipe threads

Brass Push-to-Connect Fittings (Bulletin 3531-QRG/USA)

Prestolok brass and Prestolok II composite push-to-connect ttings are designed for use with nylon, polyethylene, polyurethane and soft metal tubing Ideal for pneumatic applications Equipped with stainless steel grab rings eliminating need for tube supports No tools required for installation Designed for side-loading

29

Enclosures

Pneumatic Ball Valves Compression Fittings Sanitary and BioPharmaceutical

Parker Performance Stainless is a complete line of sanitary ttings, valves and related ow components for use in a variety of hygienic processing applications. These products meet the stringent standards required by processors in the food, beverage, dairy, biopharm and health & beauty industries.

Analytical Systems

Sanitary Fittings (Catalog 4270)

Buttweld, clamp, bevel seat, I-line, and other tting styles available Unpolished I.D. and unpolished O.D. Both I.D. and O.D. are mill or tumble nished A full line of adapters for threaded, anged and socket weld connections also available Sanitary tubing and tubing hangers available to complete any project

Valves and Flow Components (Catalog 4270-VFC)

Sanitary versions of sample, ball, buttery and check valves available A complete line of pneumatic and electric actuators and control accessories. Choose from traditional rack-and pinion style or stainless steel wash down versions Valves are precision manufactured from heat traceable materials and designed to perform under the most exacting conditions Available with a variety of elastomers and other customer-specied congurations to ensure a perfect t within any processing system

30

Valves Pressure Regulators

Product Selection Guide CD Operating Instructions
Parkers Product Selection Guide CD contains electronic versions of all catalogs referenced in the Product Selection Guide document as well as additional Parker Instrumentation product lines. To use the CD Simply place the disc in your CD drive. An autorun program on the CD will search your computer for the Adobe Acrobat Reader program, version 5.0 or higher.

Quick Couplings

Pipe Fittings

If Acrobat Reader is found, the opening screen of the CD will appear. From the opening screen, you can view this Product Selection Guide, go to specic product categories or choose a specic catalog. If Acrobat Reader is not found, it will be installed on your hard drive and then the opening screen of the CD will appear. From the opening screen, you can view this Product Selection Guide, go to specic product categories or choose a specic catalog.

Hastelloy C-22 is a registered trademark of Haynes International, Inc. Hastalloy is a registered trademark of Haynes Industries, Inc. PEEK is a registered trademark of Victrex plc. MONEL is a trademark of the Special Metals Corporation. GRAFOIL is a registered trademark of GrafTech International.

31

Parker Hannifin Corp. Instrumentation Group Divisions

Instrumentation Products Divisions Connectors Operation 1005 A Cleaner Way Huntsville, AL 35805 Phone: (256) 885-3800 Fax: (256) 881-5072 www.parker.com/ipdus Valve Operation 2651 Alabama Highway 21 North Jacksonville, AL 36265 Phone: (256) 435-2130 Fax: (256) 435-7718 www.parker.com/ipdus Europe Riverside Road Pottington Business Park Barnstaple, Devon EX31 1NP Phone: (44) 1271-313131 Fax: (44) 1271-373636 www.parker.com/ipd Porter Instrument Division 245 Township Line Road Hateld, PA 19440 Phone: (215) 723-4000 Fax: (215) 723-2199 www.parker.com/porterinstrument Veriflo Division 250 Canal Boulevard Richmond, CA 94804 Phone: (510) 574-9590 Fax: (510) 232-7396 www.parker.com/veriflo Verio Division Partek Operation 7075 East Southpoint Road Tucson, AZ 85706 Phone: (520) 574-2600 Fax: (520) 574-2700 www.parker.com/partek

Parker Worldwide Product Information

U.S.: 1-800-C-Parker (1-800-272-7537) Europe: 00-800-C-Parker-H (00800-27-27-5374) To nd your local distributor: www.parker.com Your local Parker Instrumentation Group authorized distributor:

ING Process PSG 25M 02/07 AMD