TECHNICAL DATA SHEET

Colour Chart
Trinity Block Paving
Silver Granite

Features
• Concrete Block Paving
• Lightly textured surface finish using premium granite aggregates
• Available in an 80mm depth for commercial loading
Black Granite
• Can be laid in a variety of patterns depending on unit selected, please ask our technical team for
laying pattern options
• Available in 3 standard colours
• Bespoke colours available upon request

Product Range
Dimensions Colours Pcs m2 Pcs No. Approx. Profile
Buff Granite
(mm) Per Per Per Layers Bale
m2 bale bale Weight
(KG)
300x300x80 Silver Granite, Black Granite, Buff Granite 11.1 6.48 72 9 1100 Square edge
300x200x80 Silver Granite, Black Granite, Buff Granite 16.6 6.72 112 7 1115 Square edge
200x200x80 Silver Granite, Black Granite, Buff Granite 25 6.72 168 7 1115 Square edge

Benefits
• Extremely robust due the
increased cement content
and Granite surface
• Unlike Natural Granite and
Porcelain, the Trinity Block
Paving keeps the declared
slip resistance of extremely
low throughout its life cycle
• Cost reduction on supply
and installation when
compared to natural Granite
and Porcelain
• Factory sealed application
now available upon request

Product Type Concrete Block Paving Application & Product suitable for both pedestrian, vehicular traffic when installed in conjunction with the
Trafficking correct, site specific sub-base design.
Product Standard EN 1338:2003

Manufacturing Method Hydraulically pressed semi dry concrete

Joint Trinity Block Paving have a 1.5mm approx. internal spacer nib which will give a resulting
Finish Textured granite aggregate finish standard joint width of approx. 2mm when laid. Joints should be filled with kiln dried sand.
Note that silver granite kiln dried sand must be used for the silver and buff colour option to
Packaging Information Baled, strapped and plastic cover reduce potential staining.

Slip/Skid Resistance Extremely low – Typically USRV/PTV >75

BREEAM A rated in accordance with Green Guide Specification Edition 4, 2009. A+ rated when used
in conjunction with a prepared recycled sub-base
Strength Typical tensile splitting strength of >3.6 MPa and a failure load of >250N/mm

Technical Support
Help with the preparation of specifications using any of Kilsaran’s hard
landscaping products, including design, BIM and NBS is available through
our dedicated technical team and regional sales office. Eco Paving Range Kilsaran are committed to
leading the way in the industry with sustainable and
For further information, please contact Kilsaran’s Technical Team:
techinical@kilsaran.ie environmentally friendly product manufacturing and
continual product development.