User Guide Guide d'utilisation Guía de usuario

CXPL303, CXPL303A, CXPL303B, CXPL303C

 Get to know your Cricut Maker™ 4
1 Slot for mobile device 5 Storage 9 Pause button
2 Clamp A 6 Power button 10 USB port
3 Clamp B 7 Load/Unload button 11 Material guides
4 Storage cup 8 Go button

4 1 6

7 8 9

2 3

11 11 10
5

Indicator Lights
Power Button: White Power Button: Purple Go Button: Flashing White
Machine on Update in progress Ready to Go
Power Button: Blue Load Button: Flashing White Pause Button: White
Connected to Bluetooth® Ready to Load/Unload Ready to Pause/Unpause
Power Button: Red
Error

4
 EN
Included How to power on
• Cricut Maker™ 4 smart cutting machine Before operating machine, read enclosed
• Premium Fine-Point Blade + Housing Important Safety Instructions

• Light Grip Machine Mat • Connect included power adaptor to machine

• Mini Weeder • Make sure to only plug other end into

compatible wall outlet
• Fine Point Pen (0.4 mm)
• Connect machine to compatible device via
• Free trial subscription to Cricut Access™ Bluetooth®
(for new subscribers)
• Activate your machine at cricut.com/setup
• Power adapter
• USB cable Use caution and follow instructions when
replacing blade. For instructions, see blade
• Materials to get started packaging or help.cricut.com/blades

Important Safety Instructions

PLEASE READ THIS ENTIRE DOCUMENT PRIOR TO Indoor Use Only. Machine is only intended for
SETTING UP, OPERATING AND SERVICING YOUR indoor use in dry locations. Do not use
CRICUT™ SMART CUTTING MACHINE. PLEASE in or near water. Do not immerse in water or any other
FOLLOW THE ENCLOSED INSTRUCTIONS, ONLINE liquid.
INSTRUCTIONS AND OTHER OFFICIAL CRICUT Machine is not intended for use by persons with
INSTRUCTIONAL MATERIALS. FOR MORE SAFETY reduced physical, sensory or cognitive capabilities,
AND COMPLIANCE INFORMATION, GO TO or lack of experience and knowledge, unless they are
CRICUT.COM/PRODUCT-DOCUMENTATION
supervised by a person responsible for their safety and
In these instructions the term “Machine” means Cricut familiar with the safe operation of Machine.
Maker™ 4.
Disconnect the electrical power by unplugging
WARNING: Risk of Injury, Fire and Electric machine when not in use and before any servicing or
Shock. cleaning.
Operating Machine in a manner not prescribed Only clean Machine with a soft cloth dampened
in the enclosed instructions, online instructions with glass cleaner or water. Never use any kind of
and other official Cricut materials may result flammable liquid to clean Machine. Do not use solvents
in damage to the Machine, property damage, injury or such as acetone or nail polish remover to clean
even death. Machine as these will permanently damage Machine’s
Machine is only intended to be operated by an surfaces.
adult. Not intended for use by children Always unplug Machine before replacing the cutting
12 years or under. Always supervise children blade. Blades are extremely sharp and should be
around Machine. handled with caution and extreme care. Prevent blade
Only use Machine for its intended crafting purpose. contact with hands and body to avoid injury. Do not

5
 allow children to handle blades. Blades and other small Do not place your fingers or other objects in Machine
parts are choking hazards and should be kept and while connected to electrical power or while Machine is
stored away from children. powered on, or during cutting operations.
Do not open, modify or otherwise tamper with Machine. Keep hair, jewelry, loose clothing, fingers, other body
Do not operate if Machine or cord is damaged. Contact parts and any other items that could get caught in the
Cricut Member Care for service: moving parts away from Machine while it is operating
cricut.com/contact or 1-877-727-4288. as the rapid movements of the cutting carriage, mat
and material during operation may cause injury.
Only use Cricut-approved power adapters. Always turn
Machine OFF before unplugging from the electrical Do not touch the mat or material during cutting, even if
outlet. Never pull on the cord to disconnect Machine the mat or material stops moving. Do not touch the mat
from the electrical outlet; instead, grasp the plug and or material until Machine ejects the mat or material
pull to disconnect Machine. from Machine.

The power cord should be positioned so that it will not Machine should never be left or stored outside,
drape over the countertop or tabletop where it can in unheated or unairconditioned spaces, or in
be tripped over, snagged or pulled on unintentionally environments where Machine can come in contact
(especially by children). with water.

Place Machine on a strong, flat, level and stable LIMITED WARRANTY: See cricut.com/warranty,
surface. Make sure your work space has enough space or write to manufacturer or authorized region
in the front and back of Machine to allow the cutting representative at applicable address shown,
mat to move through Machine freely. for full terms and conditions.

Every project is unique.

For more help resources, see • Join other Cricut Community members in our
help.cricut.com official Cricut Facebook group
• Get inspiration and step-by-step tutorials on • Cricut Member Care: cricut.com/contact
youtube.com/cricut or 1-877-727-4288

FCC STATEMENT
The U.S. Federal Communications Commission (in 47 modifications to this equipment not expressly approved
CFR 15.105) has specified that the following notices be by Cricut may cause harmful interference and void the
brought to the attention of users of this product. FCC authorization to operate this equipment.
This device complies with part 15 of the FCC rules. NOTE: This equipment has been tested and found
Operation is subject to the following two conditions: to comply with the limits for a Class B digital device,
(1) This device may not cause harmful interference, and pursuant to Part 15 of the FCC Rules. These limits are
(2) this device must accept any interference received, designed to provide reasonable protection against
including interference that may cause undesired harmful interference in a residential installation. This
operation. equipment generates, uses, and can radiate radio
Pursuant to Part 15.21 of the FCC Rules, any changes or frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful

6
interference to radio communications. However, there • Reorient or relocate the receiving antenna
is no guarantee that interference will not occur in a
• Increase the separation between the equipment
particular installation. If this equipment does cause
and receiver
harmful interference to radio or television reception,
which can be determined by turning the equipment • Connect the equipment into an outlet on a circuit
off and on, the user is encouraged to try to correct the different from that to which the receiver is
interference by one or more of the following measures: connected
• Consult the dealer or an experienced radio/TV
technician for help

Technical specifications
Cricut Maker™ 4 Models: CXPL303, CXPL303A, The overall design is similar to a desktop printer or
CXPL303B, CXPL303C plotter with an electrically driven head that moves the
Description: The Cricut Maker™ 4 is a desktop design tools laterally and feed rollers that move the
manufacturing device for helping do it yourself (DIY) crafting materials longitudinally. The combination of
crafters make crafting projects. It takes images created these movements gives 2 axis motion to perform the
in a software design environment and recreates the desired actions (cutting, drawing, etc.) on the crafting
images in fabric, leather, paper and soft woods using materials in a 2 dimensional flat plane.
tools to cut, score, draw, transfer, perforate, engrave
and write on these materials.

Product specifications
Size 22.1 in x 7.1 in x 6.2 in (56 cm x 18.3 cm x 15.8 cm)
Weight 15.4 lbs (6.99 kg)
Power input (appliance inlet) 24.0 V 1.5 A
External power supply Model: TS-A066-2402751
Input: 100-240 V ~ 50/60 Hz 1.6 A
Output: 24.0 V 2.75 A
Model: PS66A240Y2750S
Input: 100-240 V ~ 50/60 Hz 1.6 A
Output: 24.0 V 2.75 A
Model: TS-A036-2401506
Input: 100-240 V ~ 50/60 Hz 1.2 A
Output: 24.0 V 1.5 A
Operating mode Continuous
Electrical classification Class III (Supplied by SELV)
Pollution degree PD 2
Ingress protection IPX0 (ordinary)
Wireless specifications
Transmission type Bluetooth®
Frequency Band 2.4000–2.4835 GHz
Maximum Radiated Power <= 100 mW (e.i.r.p.)