A/C SYSTEM SPECIFICATIONS
1994 Toyota Celica
1994 A/C System Specifications
Camry, Celica, Corolla, Land Cruiser, MR2, Paseo, Pickup,
Previa, Supra, Tercel, T100, 4Runner
A/C SYSTEM SPECIFICATIONS
MANUAL A/C SYSTEM SPECIFICATIONS TABLE (CAMRY & COROLLA)
Application Specification
Compressor Type
Camry ................................ Nippondenso 10PA17C 10-Cyl.
Corolla ............................... Nippondenso 10PA15 10-Cyl.
Compressor Belt Tension (1)
Camry (5S-FE)
New Belt (2) ........................... 140-190 lbs. (63-87 kg)
Used Belt .............................. 100-120 lbs. (45-54 kg)
Camry (1MZ-FE)
New Belt (2) ........................... 140-190 lbs. (64-86 kg)
Used Belt ............................... 66-110 lbs. (30-50 kg)
Corolla
New Belt (2) ........................... 140-180 lbs. (64-82 kg)
Used Belt ............................... 80-120 lbs. (36-54 kg)
Compressor Oil Capacity (3)
Camry ................................................... 4.9 ozs.
Corolla ................................................. 4.1 ozs.
Refrigerant (R-134a) Capacity
Camry ............................................. 28.2-31.7 ozs.
Corolla ........................................... 24.7-28.2 ozs.
System Operating Pressures (4)
High Side ............................. 199-228 psi (14-16 kg/cm )
Low Side .............................. 21-36 psi (1.5-2.5 kg/cm )
(1) - Using a belt tension gauge, measure at midpoint of longest belt
run.
(2) - A new belt is one that has been run less than 5 minutes.
(3) - Use ND-OIL 8 refrigerant oil (Part No. 08885-09109).
(4) - With ambient temperature at 86-95 F (30-35 C) and engine at
1500 RPM.
MANUAL A/C SYSTEM SPECIFICATIONS TABLE (CELICA)
Application Specification
Compressor Type .................... (1) Nippondenso 10PA15C 10-Cyl.
Compressor Belt Tension (2)
1.8L Engine
New .................................... 120-140 lbs. (54-64 kg)
Used ..................................... 60-80 lbs. (27-36 kg)
2.2L Engine
New .................................... 155-175 lbs. (70-79 kg)
Used ................................... 100-120 lbs. (45-54 kg)
Compressor Oil Capacity (3) ............................... 4.1 ozs.
Refrigerant (R-134a) Capacity ....................... 21.1-24.7 ozs.
System Operating Pressures (4)
High Side ............................. 199-228 psi (14-16 kg/cm )
Low Side .............................. 21-36 psi (1.5-2.5 kg/cm )
(1) - A Nippondenso 10PA17C/VC 10-cylinder compressor may also be
used.
(2) - Measure with belt tension gauge at midpoint of longest belt run.
(3) - Use ND-OIL 8 (Part No. 38899-PR7-003).
(4) - Specification is with ambient temperature at 86-95 F (30-35 C)
and 1500 RPM engine speed.
MANUAL A/C SYSTEM SPECIFICATIONS TABLE (MR2)
Application Specification
Compressor Type ......................... Nippondenso 10P13C 10-Cyl.
Compressor Belt Tension (1)
New ...................................... 135-185 lbs. (61-84 kg)
Used ...................................... 80-120 lbs. (36-54 kg)
System Oil Capacity ................................... ( 2) 4.1 ozs.
Refrigerant (R-134a) Capacity ....................... 25.0-26.5 ozs.
System Operating Pressures (3)
High Side ............................. 199-228 psi (14-16 kg/cm )
Low Side .............................. 21-36 psi (1.5-2.5 kg/cm )
(1) - Using a belt tension gauge, measure at midpoint of longest belt
span.
(2) - Use ND-OIL 8 refrigerant oil (Part No. 08885-09109).
(3) - With ambient temperature at 86-95 F (30-35 C) and engine at
1500 RPM.
MANUAL A/C SYSTEM SPECIFICATIONS TABLE (PASEO & TERCEL)
Application Specification
Compressor Type
Paseo ..................................... Matsushita Rotary Vane
Tercel .............................. Matsushita TV10B Rotary Vane
Compressor Belt Tension (1)
New Belt (2) ......................... 135-185 lbs. (61.2-83.9 kg)
Used Belt ............................. 80-120 lbs. (36.3-54.4 kg)
System Oil Capacity (3) ............................... 3.4-4.1 ozs.
Refrigerant (R-134a) Capacity ....................... 22.9-26.5 ozs.
System Operating Pressures (4)
High Side ......................... 199-228 psi (14.5-15.0 kg/cm )
Low Side .............................. 21-36 psi (1.5-2.5 kg/cm )
(1) - Using a belt tension gauge, measure between compressor and
crankshaft pulley.
(2) - A new belt is one that has been used less than 5 minutes.
(3) - Use ND-Oil 9 refrigerant oil (Part
No. 08885-09119).
(4) - When ambient temperature is 86 -95 F (30 -35 C).
MANUAL A/C SYSTEM SPECS TABLE (LAND CRUISER, PICKUP & 4RUNNER)
Application Specification
Compressor Type
Land Cruiser .......................... Nippondenso 10PA17 10-Cyl.
Pickup & 4Runner ............................. Nippondenso 10-Cyl.
Compressor Belt Tension (1)
New Belt (2) ......................... 100-150 lbs. (45.4-68.1 kg)
Used Belt ............................. 60-100 lbs. (27.2-25.4 kg)
System Oil Capacity (3)
Land Cruiser & 4Runner .................................. 4.1 ozs.
Pickup .................................................. 4.8 ozs.
Refrigerant (R-134a) Capacity
Land Cruiser ...................................... 28.2-31.7 ozs.
Pickup ............................................ 18.6-22.1 ozs.
4Runner ........................................... 23.2-26.7 ozs.
System Operating Pressures (4)
Low Side .............................. 21-36 psi (1.5-2.5 kg/cm )
High Side ............................. 199-228 psi (14-16 kg/cm )
(1) - Using a belt tension gauge, measure at longest run of belt.
(2) - A new belt is one that has been used less than 5 minutes.
(3) - Use ND-Oil 8 refrigerant oil (Part No. 38885-09109).
(4) - When ambient temperature is 86-95 F (30-35 C).
MANUAL A/C SYSTEM SPECIFICATIONS TABLE (PREVIA)
Application Specification
Compressor Type ........................ Nippondenso 10PA17E 10-Cyl.
Compressor Belt Tension
Non-Supercharged
New .................................... 139-191 lbs. (63-87 kg)
Used .................................... 66-110 lbs. (30-50 kg)
Supercharged
New .................................... 145-185 lbs. (66-84 kg)
Used ................................... 110-150 lbs. (50-68 kg)
System Oil Capacity (1) ............................... 3.4-4.1 ozs.
Refrigerant (R-134a) Capacity
With Rear A/C ..................................... 38.8-42.3 ozs.
Without Rear A/C .................................. 30.0-33.5 ozs.
System Operating Pressures
High Side ......................... 206-228 psi (14.5-16.0 kg/cm )
Low Side .............................. 21-36 psi (1.5-2.5 kg/cm )
(1) - Use refrigerant oil ND-Oil 8 (Part No. 38899-PR7-003).
MANUAL A/C SYSTEM SPECIFICATIONS TABLE (T100)
Application Specification
Compressor Type ......................... Nippondenso 10PA15 10-Cyl.
Compressor Belt Tension (1)
2.7L
New (2) ................................ 135-185 lbs. (61-84 kg)
Used .................................... 80-120 lbs. (36-54 kg)
3.0L
New (2) ................................ 100-150 lbs. (45-68 kg)
Used .................................... 60-100 lbs. (27-45 kg)
System Oil Capacity (3) ............................... 3.4-4.1 ozs.
Refrigerant (R-134a) Capacity ....................... 21.2-24.7 ozs.
System Operating Pressures (4)
High Side ............................. 199-228 psi (14-16 kg/cm )
Low Side .............................. 21-36 psi (1.5-2.5 kg/cm )
(1) - Using a belt tension gauge, measure at longest run of belt.
(2) - A new belt is one that has been used less than 5 minutes.
(3) - Use ND-Oil 8 refrigerant oil (Part
No. 08885-09109).
(4) - When ambient temperature is 86 -95 F (30 -35 C).
MANUAL A/C SYSTEM SPECIFICATIONS TABLE (SUPRA)
Application Specification
Compressor Type ................................ Nippondenso 10-Cyl.
Compressor Belt Tension (1)
Compressor Oil Capacity ............................... ( 2) 4.1 ozs.
Refrigerant (R-134a) Capacity ..................... 23.2.9-26.7 ozs.
System Operating Pressures
High Side ............................. 199-228 psi (14-16 kg/cm )
Low Side .............................. 28-36 psi (2.0-2.5 kg/cm )
(1) - See COMPRESSOR BELT TENSION under ADJUSTMENTS.
(2) - Use ND-Oil 8 (Part No. 08885-09109).
