Scribd
Upload
8 views2 pages

Switch On

The document provides instructions for setting up and operating the estefold ® 4211 folder, including safety precautions and power requirements. It details the display information, error codes, and LED indicators for operational status. Additionally, it emphasizes the importance of using the correct power supply and avoiding multi-plug extension cords.

Uploaded by

AndreiMladin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views2 pages

Switch On

The document provides instructions for setting up and operating the estefold ® 4211 folder, including safety precautions and power requirements. It details the display information, error codes, and LED indicators for operational status. Additionally, it emphasizes the importance of using the correct power supply and avoiding multi-plug extension cords.

Uploaded by

AndreiMladin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Interactive Manuals

Search
estefold ® 4211 Power & Switch on
Interactive Manuals Please use only the connecting cable delivered with the
folder. The folder is pre-adjusted to 230 Volts/50 cycles.
Make sure that the mains supply voltage is identical with
Safety instructions your supply.

Do not use multi plug extension cords!


Set Up
These cords will not stand the power consumption of
Power & Switch on plotter and folder.

Display information

Media and formats

Customize program

Folding styles The power supply box is at the right bottom side of the
folder.
Feeding copies
Find the folders serial number and the voltage level on
the label beside.
Trouble shooting

Overview

Dimension

Technical specification

Error codes

Optional features

Tab Applicator The main switch is at the folder’s front side.

A2 Rotation Unit

The display shows a short message as indicated. Briefly


the Firmware versions are shown in the display.

After that the display shows "este Foldsystem" including


folder software version and release. When the folder has
completely started a double beep signal will sound. At
the same instance, you will notice the green LED on top
of the display illuminate. You will see the folding program
last used displayed.

In case an error is detected during the self test phase, a


message will be shown in the display after "este
Foldsystem" has disappeared. The message contains
error and localization code. Furthermore, a red LED on
top of the display will be blinking. Refer to the
Error Code List .
After clearing the jam press button in order to restart
the folder.

There are three LEDs on top of the folder's display:

The green LED indicates the folder being ready for safe
and normal operation.
The red LED is blinking in case of any error.
The yellow LED indicates that the folder is busy folding.

You might also like