JOB CARD MPD-TASK: 245000-02
JAI - A330 AMM TASK : 24-52-00-710-802-B
24-52-00 PB 501
TITLE:
A/C Reg.: 24-52-00-710-802-B - Operational Test
VT-JWR of LAND RECOVERY Configuration
CARD: ZONE: INTERVAL:
SKILL: ACCESS: 811
MECH. INSP.
** ON A/C ALL
TASK 24-52-00-710-802-B
Operational Test of LAND RECOVERY Configuration
1. Reason for the Job
Refer to the MPD TASK: 245000-02
OPERATIONAL CHECK OF LAND RECOVERY CONFIGURATION.
Make sure that LAND RECOVERY busbars are shed in emergency configuration and
recovered when the LAND RECOVERY pushbutton switch is pushed.
2 Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
REFERENCE QTYDESIGNATION
No specific AR ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
B. Work Zones and Access Panels
ZONE/ACCESS ZONE DESCRIPTION
811
C. Referenced Information
REFERENCE DESIGNATION
(Ref. 24-41-00-861-801-A). Energize the Aircraft Electrical Circuits from the External
Power A
(Ref. 24-41-00-861-801-A- Energize the Aircraft Electrical Circuits from the APU
01). (APU Started with APU BAT)
(Ref. 24-41-00-861-801-A- Energize the Aircraft Electrical Circuits from the External
03). Power A and B
(Ref. 24-41-00-861-801-A- Energize the Aircraft Electrical Circuits from the APU
04). (APU started with External power A)
(Ref. 24-41-00-861-801-A- Energize the Aircraft Electrical Circuits from the External
05). Power B
(Ref. 24-41-00-862-801-A). De-energize the Aircraft Electrical Circuits from the
External Power A
(Ref. 24-41-00-862-801-A- De-energize the Aircraft Electrical Circuits from the APU
01).
(Ref. 24-41-00-862-801-A- De-energize the Aircraft Electrical Circuits from the
03). External Power A and B
(Ref. 24-41-00-862-801-A- De-energize the Aircraft Electrical Circuits from the
04). External Power B
JCP Title: C-CHECK CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 1 of 5
JCP Ref: C-CHECK DATABASE REV DATE: Apr 01/2017
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Apr 06/2017 09:28
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK: 245000-02
JAI - A330 AMM TASK : 24-52-00-710-802-B
24-52-00 PB 501
TITLE:
A/C Reg.: 24-52-00-710-802-B - Operational Test
VT-JWR of LAND RECOVERY Configuration
MECH. INSP.
REFERENCE DESIGNATION
(Ref. 29-00-00-863-801-A- Pressurize the Green Hydraulic System with the Electric
01). Pump
(Ref. 29-00-00-864-801-A- Depressurize the Green Hydraulic System (Pressurized
01). with the Electric Pump)
(Ref. 31-60-00-860-801-A). EIS Start Procedure
(Ref. 31-60-00-860-802-A). EIS Stop Procedure
(Ref. 45-10-00-860-805-A). Procedure to get access to the SYSTEM REPORT/TEST
COM:RADIO page
3. Job Set-up
Subtask 24-52-00-860-055-A
A. Aircraft Maintenance Configuration
WARNING:MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT
CONTROLS ARE CLEAR.
MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO
PERSONS AND/OR DAMAGE.
CAUTION: DO NOT OPERATE THE FLAPS AND SLATS WHEN ONE OR MORE
"LEAK MEASUREMENT VALVES" PUSHBUTTON SWITCHES ARE IN
THE RELEASED POSITION ("OFF" LEGEND ON).
OPERATION OF THE FLAPS AND SLATS IN THIS CONFIGURATION
CAN CAUSE JAMMING OF THE MECHANICAL TRANSMISSION.
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-801) .
(2) Do the EIS start procedure (ECAM system only) (Ref. AMM TASK 31-60-00-860-
801) .
(3) Pressurize the Green hydraulic system
(Ref. AMM TASK 29-00-00-863-801) .
(4) On the FLAPS control panel 114VU, make sure that the flap and slat control lever
is in 0 position.
(5) On the HYD section of the maintenance panel 285VU, release the LEAK
MEASUREMENT VALVE/G pushbutton switch (the OFF legend comes on).
(6) On the ECAM control panel, push the CLR key until the DOOR page comes into
view on the SD.
Subtask 24-52-00-010-051-A
B. Get Access
(1) Put an ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the access
door 811.
(2) Open the access door 811.
(3) Open the protective door of the AC/DC emergency power center 740VU.
Subtask 24-52-00-865-055-A
JCP Title: C-CHECK CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 2 of 5
JCP Ref: C-CHECK DATABASE REV DATE: Apr 01/2017
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Apr 06/2017 09:28
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK: 245000-02
JAI - A330 AMM TASK : 24-52-00-710-802-B
24-52-00 PB 501
TITLE:
A/C Reg.: 24-52-00-710-802-B - Operational Test
VT-JWR of LAND RECOVERY Configuration
MECH. INSP.
C. Make sure that this(these) circuit breaker(s) is(are) closed:
PANEL DESIGNATION FIN LOCATION
721VU 1XP VOLT REF/TEST 29XE D04
722VU 2XP VOLT REF/TEST 30XE D49
742VU 401XP CTL 17XH A77
742VU LAND RCVY BUS SWTG 13PH E80
742VU AC EMER DET RLY 25XE E77
742VU CSM/G AUTO START 17XE J78
742VU LAND RCVY CTL 9XC K64
742VU LGCIU 1 1GA L63
742VU 801/805PP SHED CTL 4PH N64
742VU 801/805PP CTL 3PH N63
742VU CSM/G OFF CTL 24XE N62
742VU CSM/G MAN START 22XE N61
742VU 805PP 11PH S77
4. Procedure
Subtask 24-52-00-710-055-B
A. Operational Test of LAND RECOVERY Configuration
ACTION RESULT
1.On the center pedestal, on the ECAM On the SD, on the HYD page:
control panel: · Make sure that the normal configuration
· Push the HYD key. comes into view.
· Make sure that the actual system
pressure indication below the GREEN
indication is of 3000 -200 psi or +200 psi
(206.84 -13.79 bar or +13.79 bar).
NOTE: A minimum hydraulic pressure is
necessary for the CSM/G to start
and operate correctly.
2.On the ECAM control panel: On the SD, on the ELEC AC page:
· Push the EL/AC key. · The normal configuration comes into
view.
3.On panel 211VU, on the EMER ELEC On panel 211VU:
section: · The ON legend of the LAND
· Push the LAND RECOVERY RECOVERY pushbutton switch comes
pushbutton switch. on.
On the SD, on the ELEC AC page:
· The green LAND RCVRY indication
comes into view on the left side of the
AC ESS busbar.
4.On panel 211VU, on the EMER ELEC On the SD, on the ELEC AC page:
section:
· Lift the safety guard.
JCP Title: C-CHECK CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 3 of 5
JCP Ref: C-CHECK DATABASE REV DATE: Apr 01/2017
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Apr 06/2017 09:28
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK: 245000-02
JAI - A330 AMM TASK : 24-52-00-710-802-B
24-52-00 PB 501
TITLE:
A/C Reg.: 24-52-00-710-802-B - Operational Test
VT-JWR of LAND RECOVERY Configuration
MECH. INSP.
ACTION RESULT
· Push and hold the EMER GEN TEST · The green line between the AC1 busbar
pushbutton switch. and the AC ESS busbar goes out of
view.
· The EMER GEN indication is shown in
white, the related parameters are shown
in green.
· The green line between the EMER GEN
and the AC ESS busbar comes into
view.
· The amber SHED indication comes on
on the right of the AC ESS busbar.
On the EWD:
· The DC ESS BUS SHED and AC ESS
BUS SHED indications come into view.
On the CAPT and F/O glareshield panels
411VU and 412VU:
· The amber MASTER CAUT lights come
on and you can hear the single chime.
5.On panel 211VU: On panel 211VU:
· Release the LAND RECOVERY · The ON legend of the LAND
pushbutton switch. RECOVERY pushbutton switch goes off.
On the SD, on the ELEC AC page:
· The green LAND RCVRY indication goes
out of view.
6.On the ECAM control panel: On the SD, on the STATUS page:
· Push the STS key. · The LGCIU 1 indication comes into view
on the INOP SYS part.
· Ignore all the other warnings that can
come into view and are not given in this
test procedure.
7.On panel 211VU: On panel 211VU:
· Push the LAND RECOVERY · The ON legend of the LAND
pushbutton switch. RECOVERY pushbutton switch comes
on.
On the SD, on the ELEC AC page:
· The green LAND RCVRY indication
comes into view.
On the SD, on the STATUS page:
· The LGCIU 1 indications goes out of
view.
8.On panel 211VU: On the SD, on the ELEC AC page:
· Release the EMER GEN TEST · The normal configuration comes into
pushbutton switch. view (the CSM/G stops).
On the EWD:
· The DC ESS BUS SHED and AC ESS
BUS SHED indications go out of view.
On the CAPT and F/O glareshield panels
411VU and 412VU:
JCP Title: C-CHECK CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 4 of 5
JCP Ref: C-CHECK DATABASE REV DATE: Apr 01/2017
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Apr 06/2017 09:28
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK: 245000-02
JAI - A330 AMM TASK : 24-52-00-710-802-B
24-52-00 PB 501
TITLE:
A/C Reg.: 24-52-00-710-802-B - Operational Test
VT-JWR of LAND RECOVERY Configuration
MECH. INSP.
ACTION RESULT
· The amber MASTER CAUT lights go off
and the single chime stops.
9.On the MCDU: On the MCDU:
· Get access to the SYSTEM · Make sure that the SYSTEM REPORT/
REPORT/TEST COM:RADIO page TEST COM:RADIO page comes into
(Ref. AMM TASK 45-10-00-860-805) . view.
10.On the MCDU: On the MCDU:
· Push the line key adjacent to the HF 1 · Make sure that the HF 1 page does not
indication. come into view.
11.On panel 211VU: On panel 211VU:
· Release the LAND RECOVERY · The ON legend of the LAND
pushbutton switch. RECOVERY pushbutton switch goes off.
On the SD, on the ELEC AC page:
· the green LAND RCVRY indication goes
out of view.
5. Close-up
Subtask 24-52-00-860-056-A
A. Put the aircraft back to its initial configuration.
(1) Depressurize the Green hydraulic system
(Ref. AMM TASK 29-00-00-864-801) .
(2) On the HYD section of the maintenance panel 285VU, push the LEAK
MEASUREMENTVALVE/G pushbutton switch (the OFF legend goes off)
(3) Do the EIS stop procedure
(Ref. AMM TASK 31-60-00-860-802) .
(4) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-801) .
Subtask 24-52-00-410-051-A
B. Close Access
(1) Close the protective door of the AC/DC emergency power center 740VU.
(2) Close the access door 811.
(3) Remove the access platform(s).
*** END OF CARD ***
JCP Title: C-CHECK CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 5 of 5
JCP Ref: C-CHECK DATABASE REV DATE: Apr 01/2017
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Apr 06/2017 09:28
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
