LJ5139

Jaw Crusher

Product Speci² cation A world working better ™

 Hopper and Feeder

6SHFL²FDWLRQ Hopper / Feeder

:
Inlet Opening 1300mm x 1000mm (51” x 39”) Hopper capacity: 12m³ (15.7yd³) Incl. extensions

Net Engine Power: Tier 4F / Stage IV: Hopper Dimensions: 3760mm x 5460 (12’ 4 ¼” x 17’ 10”)
Scania DC13 361kW (484hp)
Feed height: 5490mm (18’)
Portability: Tracked
Material: 15mm Hardox 450 wear resistant steel
Operating Weight: 105,000kg (231,000lbs)*
Welded construction
*Dependant on specification
Rolled Convex hopper sides for increased impact
resistance

Stepped cassette style vibrating grizzly feeder

Grizzly feeder dimensions: 1350mm - 5000mm (4’ 5” -

16’ 4”)
Optional Grizzly feeder aperture taper: 75mm - 125mm
(3” - 5”)
Optional Under screen: 1350mm x 1370mm (4’ 5” x 5’ 6”)

Heavy duty I beam design

-DZ&KDPEHU

Terex single toggle jaw crusher

Inlet width: 1300mm (51”)

Inlet gape: 1000mm (39”)

Drive arrangement: Direct Diesel or Electric

Maximum Closed Side Settings (CSS): 250mm (10”)

Minimum Closed Side Settings (CSS): 125mm (5”)

Reverse action for clearing blockages

Full hydraulic closed side setting adjust

Standard Liner Profile: Quarry-Tooth (18% Manganese)

Jaw Chamber
Powerpack Magnetic Separator (Optional)

Powerpack Magnetic Separator (Optional)

Tier 4F / Stage IV: Scania DC13 Belt Width: 750mm (30”)

Engine Power: 361kW (484hp) Belt Spec: Cleated

Engine Speed: 1540 rpm Belt Speed: Fixed

Drive: Electric

Undercarriage

Shoe Width: 500mm (20”)

Tank Capacities Sprocket Centres: 5m (16’ 5 5/8”)

Hydraulic Tank: 500 litres / 110 UK gal / 132 US gal Single speed proportional tracking with ‘soft start’

Fuel Tank: 800 litres / 176 UK gal / 210 US gal Speed: 0.7 km/h (maximum speed)

Gradeability: 25°

By-Pass Conveyor (Optional)

Belt Width: 650mm (2’ 1”)

Belt Spec: Plain

Speed: 96m/min

Removable for transport

Discharge Height: 4m (13’ 1”)

Maximum stockpile height: 4m (13’ 1”)

By-Pass Conveyor (Optional) Undercarriage

Chutes Control System

Heavy duty inlet chute with bolt-up construction, and Advanced CANBUS compliant system Large display
liner plates screen (IP67 Rated). Five simple operating modes with
menu driven graphic user interface:
By-pass chute with selectable discharge flop gate, to
• Track mode: For moving machine
either by-pass conveyor or main conveyor
• Manual mode: For manually starting machine
• Automatic mode: For automatically starting the
Platforms machine in predetermined sequence
• Configuration mode: For testing/setting individual
Galvanised access platforms and ladders for full
components
maintenance and service access
• Language selection: For setting languages
Platform access on both sides of the machine with
Choice of preset parameters to suit crushing applications
access to both sides of the powerunit and to the rear of
• Hard Rock
the machine
• Soft Rock
Compact folding for transport • Demolition and Recycle

User friendly incremental selection of feeder speed

Remote Control Unit (Optional) enable the operator to achieve the optimal throughput
Full function radio remote unit Detachable doglead control for tracking
Control chamber in unblock mode once enabled in the Radio remote control as standard
PLC
Integrated machine and engine control panel
Feeder stop / start
Lockable compartment

Auto regulating feeder selectable for improved

throughput control.

Emergency stops: 7 off

Standard Features Optional Equipment
Engine Bypass conveyor with 650mm wide plain belt

Tier 4F / Stage IV: Scania DC13 361kW (484hp) Twinpole over band twinpole magnet (c/w stainless
steel skirting & stainless steel discharge chute on Right
Hand Side)
Jaw Chamber
Hopper with Extensions - 12m³ (15.6yd³)
Terex 1300mm x 1000mm (51” x 39”) single toggle jaw
crusher Cold climate lubrication kit (recommended for ambient
temperatures between -20ºc to + 30ºc)
Fully hydraulically adjustable closed side setting
Hot climate lubrication kit (recommended for ambient
Reversible operation for clearing blockages
temperatures between +15ºc to +50ºc)
Quarry tooth liners - 18% Manganese as Standard
Hot climate cooler pack c/w hot climate lubrication kit
(Recommended for ambient temperatures >35ºc)
Hopper/Feeder
Electrically driven water pump
Hopper capacity: 12m³ (15.7yd³) Incl. extensions
3 Phase or 24V option
Convex Hopper doors for increased strength
Double Deck Terex Simplicity under screen assembly
Grizzly feeder dimensions: 1350mm - 5000mm (4’ 5” - mounted on coil springs with two 4kw imbalance
16’ 4”) vibrator units
Grizzly feeder aperture taper: 75mm - 125mm (3” - 5”) Screen dimensions: 1350mm (4’5”) x 1370mm (5’6”)
Mesh options for undescreen
Main Conveyor Blanking mat for underscreen
Belt WLGWKP ª ²WWHGZLWKLPSDFWEDUVDWIHHG
point
High spec scraper at head drum

Piped for dust suppression complete with spray bars

General

Separate central operator’s panel

Galvanised walkways c/w handrail, kick board and

access ladders
Heavy duty undercarriage unit with 500mm wide pads

Handheld track control set with connection lead

Single speed tracks with ‘soft start’
Safety Guards in compliance with machinery directive
Emergency stops

Stockpile Sensor (main conveyor)

Electric refuelling pump

Standard oils

(Recommended for ambient temperatures between -5

to +30°C)
Main Conveyor Jaw Chamber Hopper and Feeder
• Hopper capacity: 12m³ (15.7yd³)
• Belt Width: 1.4m (55”) • Terex single toggle jaw crusher
• Hopper Dimensions: 3760mm x 5460 (12’ 4 ¼” x 17’ 10”)
• Belt Spec: Plain • Inlet width: 1300mm (51”)
‡)HHGKHLJKWPP ¬
• Working Angle: 21° • Inlet gape: 1000mm (39”)
• Material: 15mm Hardox 450 wear resistant steel
• Discharge Height: 4m (13’ 1”) • Drive arrangement: Direct Diesel or Electric
• Hydraulic raise/lower of main conveyor and • Maximum Closed Side Settings (CSS): 250mm (10”) ‡*UL]]O\IHHGHUGLPHQVLRQVPPPP ¬ª¬ª
head section forservice access • Minimum Closed Side Settings (CSS): 125mm (5”) ‡*UL]]O\IHHGHUDSHUWXUHWDSHUPPPP ªª
• Impact bars and wear resistant liners at • Reverse action for clearing blockages ‡)HHGHUVSHHGUDQJHYDULDEOHUSP
feed point
• Full hydraulic closed side setting adjust
• High spec scraper at head drum
‡6WDQGDUG/LQHU3UR²OH4XDUU\7RRWK 0DQJDQHVH
‡'XVWVXSSUHVVLRQ²WWHGZLWKKRVHDQG
spraybars as standard (no pump supplied)
• Standard Stockpile capacity: 135.5m3
(177.2yds3) @ 40°

Powerpack
• Tier 4F / Stage IV: Scania DC13
Independent Pre-Screen
(QJLQH3RZHUN: KS
Engine Speed: 1540 rpm • Optional Under screen:
1350mm x 1370mm (4’ 5” x 5’ 6”)

Magnetic Separator Undercarriage Platforms By-pass conveyor (optional)

(optional)
• Shoe Width: 500mm (20”) • Galvanised access platforms and • Belt Width: 650mm (2’ 1”)
• Belt Width: 750mm (30”) ‡6SURFNHW&HQWUHVP ¬½”) ladders for full maintenance and • Belt Spec: Plain
• Belt Spec: Cleated service access
• Dual speed tracking with ‘soft start’ • Working Angle: 30°
• Belt Speed: Variable • Catwalk access on both sides of the
• Speed: 1.0 km/h (maximum speed) • Speed: 96 m/min nominal
machine with access to both sides
• Drive: Hydraulic • Gradeability: 25° • Removable for transport
of the powerunit and to the rear of
the machine • Discharge Height: 4m (13’ 1”)
• Compact folding for transport
Transport Dimensions
Option 1
15.52m (50’ 11”) 3.5m (11’ 6”)

3.8m (12’ 6”)

9.22m (30’ 3”) 3.5m (11’ 6”)

3.8m (12’ 6”)

Option 2
17.46m (57’ 3”) 4.8m (15’ 9”)

4.8m (15’ 9”)

5.6m (18’ 5”) 3.3m (10’ 10”)

1.64m (5’ 5”)

Working Dimensions
20.6m (67’ 7”) 8.36m (27’ 5”)
6m (19’ 8”)

Machine Weight
Working weight: 105,000kg (231,000lbs)*

Transport weight option 1*

Tracked unit: 45,000kg (99,208lbs)
Skid unit: 60,000kg (132,277lbs)
Transport weight option 2*
Tracked unit: 100,000kg (220,462lbs)
Hopper unit: 5,000kg (11,023lbs)

*For further information on specific machine

weight configurations please consult Terex MPS
www.terexmps.com A world working better™
© 2017 Terex Materials Processing and Terex are trademarks owned and licensed by Terex Corporation and its subsidiaries.