Scribd
Upload
261 views1 page

DMP 30 TDS

DMP-30 is a versatile curing agent suitable for coatings, adhesives, and sealants, known for its effectiveness and performance in various industrial applications. It has a shelf life of at least 24 months and should be stored in a cool, dry place. Typical properties include a dynamic viscosity of 157.8 mPa.s and a pot life of 40 minutes at 77°F.

Uploaded by

kannandddnh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
261 views1 page

DMP 30 TDS

DMP-30 is a versatile curing agent suitable for coatings, adhesives, and sealants, known for its effectiveness and performance in various industrial applications. It has a shelf life of at least 24 months and should be stored in a cool, dry place. Typical properties include a dynamic viscosity of 157.8 mPa.s and a pot life of 40 minutes at 77°F.

Uploaded by

kannandddnh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

Product Name: DMP-30


Curing Agent
DMP-30 is a versatile curing agent known for its effectiveness in various applications including
coatings, adhesives, and sealants. It provides excellent performance and is suitable for diverse
industrial needs. It functions effectively as both a curing agent in adhesive applications and an
activator for other curing agents, including amidoamines, amine adducts, and polyamides. Ideal for
coatings, castings, flooring, concrete, and adhesive applications, DMP 30 is also the preferred
catalyst for blends of liquid epoxy resin and liquid polysulfides for body solder, sealant, and concrete
adhesive applications.

Typical Properties
Property Value Unit Method
Appearance Transparent liquid
Color 2 Gardner
Amine Value 618.6 mg KOH/g 580 ~ 630
Dynamic Viscosity 157.8 mPa.s (25°C) 120 ~ 260
Water Content 0.15 % ≤ 0.5

Storage and Handling


Refer to the Safety Data Sheet for DMP-30 curing agent. Store in a cool, dry place away from direct
sunlight and heat sources.

Shelf Life
At least 24 months from the date of manufacture in the original sealed container at ambient
temperature. Keep containers tightly closed to prevent contamination.

Typical Cure Schedule


1 hour at 176°F.

Typical Handling Properties


Property Value Unit Method
Cure Schedule Catalyst — 10 phr
Pot Life (25g @ 77°F) 40 min
Heat Deflection Temperature 194 °F ASTM D648-264 psi

Disclaimer
This information and any recommendations, technical or otherwise, are presented in good faith
and believed to be correct as of the date prepared. Recipients must make their own determination
as to its suitability for their purposes. In no event shall Recon Chemicals assume liability for
damages or losses of any kind that result from the use of this information.

You might also like