Scribd
Upload
13 views1 page

TS Curve

The document outlines the specifications for an after filter fan project for K K Enterprises, including details on the fan model, torque, and recommended motor data. It specifies the fan's flow rate, static pressure, and power requirements at different operational conditions. Additionally, it notes that the final motor design must be confirmed by the manufacturer based on specific parameters.

Uploaded by

mail.suklads
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views1 page

TS Curve

The document outlines the specifications for an after filter fan project for K K Enterprises, including details on the fan model, torque, and recommended motor data. It specifies the fan's flow rate, static pressure, and power requirements at different operational conditions. Additionally, it notes that the final motor design must be confirmed by the manufacturer based on specific parameters.

Uploaded by

mail.suklads
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

START-UP CURVE

CUSTOMER :- K K ENTERPRISES DOC NO. :- 2506001

PROJECT :- AFTER FILTER FAN REF NO. :- 2506001

ITEM :- ID FAN FAN MODEL:- KSD-06-140

140

122
120

100
Torque [Nm]

80 Throttle device open Throttle device closed

hydordinamic anti-friction

0 60 9.553 0.0 36 28
5 4.874 145.0 22 20 57
10 2.059 290.0 13 13
12 1.755 1.755 348.0
20 4.874 2.291 580.0
40
30 10.966 5.154 870.0
40 19.495 9.163 1160.0
50 30.461 14.317 1450.0
60 43.864 20.616 1740.0
70 20 59.704 28.061 2030.0
80 77.981 36.651 2320.0
90 98.694 46.386 2610.0
100 121.845 57.267 2900.0
0
% TORQUE TORQUE (1) FAN SPEED
0.0 500.0 1000.0 1500.0 2000.0 2500.0 3000.0 3500.0
of speed (CLOSED)
Fan Speed [rpm]

FAN DESIGN RECOMENDED MOTOR DATA


Flow Rate: 3.89 [m³/sec] Motor Power (Pm): 45 [kW]
Diff. Static Pressure: 700.0 [mmWC] Motor Speed (nm): 2900 [rpm]
Mechanical Design 100 [°C] Poles: 2
Fan Speed (nf): 2900 [rpm]

Fan Power Full Open Damper 37.0 [kW] At 100⁰ C (Operating Temp.)
(Pf): Full Close Damper 17.4 [kW]
Torque (T): 122 [Nm]
TORQUE

MASS MOMENT OF INERTIA (J=WR2=0,25GD2) [kgm2]

NOTE: The final motor design has to be carried out by the motor manufacturer considering the state mass moment of inertia
and kind of starting. In case of trasmission between nm and nf tha mass moment of inertia has to be converted respectively.
Torque T is refered to fan design with nf ( T=(9550xPf)/nf )
* The Minimum Recommended motor power to be checked with the motor supplier for its suitability with respect to fan GD² value and attached TS curve.
** This is a tentative power requirement and it may very at operating temperature.

10-06-2025 FIRST ISSUE KJN SD

REV 00 DATE DESCRIPTION PREPARED CHECKED

You might also like