Geography Quick Guide
Geography Quick Guide
The mainland of India extends between latitudes 8°'N and 37°6'N and longitudes
68°7'E and 97°25'E (as shown in the map given below). The southern boundary
extends up to 6°45'N latitude in the Bay of Bengal.
India - Size
With an area of 3.28 million square km, India is the 7 th largest country of the
world.
The six largest countries of the world in decreasing order are Russia, Canada, USA,
China, Brazil, and Australia.
India accounts for about 2.4 percent of the total geographical area of the world.
The coastline of India stretches along the Bay of Bengal in the east and the Arabian
Sea in the west (as shown in the map given above).
The sun rises in Arunachal Pradesh about two hours earlier as compared to
Jaisalmer in Rajasthan.
The maximum length of the mainland from north to south is about 3214 km.
The maximum length of the mainland from east to west is about 2933 km.
Indias total length of coastline is 6,100 km of its mainland and after including
Andaman and Nicobar, and Lakshadweep islands, it is about 7,516 km.
Indias territorial limit further extends towards the sea up to 12 nautical miles (i.e.
about 21.9 km) from the coast.
82°30'E Meridian crossing through the Mirzapur city of Uttar Pradesh is taken as
Indias Standard Meridian.
Indian Standard Time is ahead of Greenwich (0° or Prime Meridian) Mean Time by
5 hours and 30 minutes.
India has total 29 States, 6 Union Territories, and 1 National Capital Territory.
India is bounded by young fold mountains (the Great Himalaya) in the North and
North-East.
Throughout the history, Indias connections with other parts of the world has been
heavily influenced by waterways and also the mountain passes.
India shares its international boundaries with Afghanistan and Pakistan in the North-
West; China, Tibet (China), Nepal, and Bhutan in the North and NorthEast; and
Myanmar and Bangladesh in the East.
Island countries Sri Lanka and Maldives are Indias neighbors across the sea.
Sri Lanka is an island nation located off the southern coast of India in South Asia
and it is bordered by the Indian Ocean. India and Sri Lanka are separated by a thin
water body called the Palk Strait.
Maldives is a chain of islands located south-west of Sri Lanka and India in the Indian
Ocean.
As per the estimation, the earth is approximately 460 million years old.
The endogenic and exogenic forces played a significant role in giving shape to
various surface and subsurface features of the earth.
The theory of Plate Tectonics defines the formation of physical aspects of the
earth.
Initially, all continents were united (there was one landmass), and known as
Pangea or Super Continent (as shown in the image given below).
The northern part of the ancient super continent Pangea was named as Angara
Land or Laurasia and the southern part was named as Gondwana Land.
The Gondwana Land includes India, Australia, South Africa, South America, and
Antarctica.
India - Structure
Based on geological history, India is divided into three regions. The regions are −
Indo-Ganga-Brahmaputra Plain.
Unlike the rigid and stable Peninsular Block, the Himalayan Mountains are young,
weak, and flexible in their geological structure.
Physiography
The Islands
The Northern and the Northeastern Mountains consist of the Himalayas and
the Northeastern hills.
Arunachal Himalayas
Eastern Hills and Mountains.
Important glaciers of South Asia, i.e., the Baltoro and Siachen are found in the
Northwestern Himalayan region.
The Kashmir Himalayas are also popular for the Karewa formations, which are
useful for the cultivation of Zafran, a local variety of saffron.
Karewas are the thick deposits of glacial clay and other materials embedded with
moraines.
Important fresh lakes are Dal and Wular and salt water lakes are Pangong Tso and
Tso Moriri.
The Himachal and Uttarakhand Himalayas are located approximately between the
rivers Ravi in the west and the Kali (a tributary of Ghaghara) in the east.
The Darjeeling and Sikkim Himalayas are flanked by the Nepal Himalayas in the
west and the Bhutan Himalayas in the east.
Arunachal Himalayas
The Arunachal Himalayas extend from the east of the Bhutan Himalayas up to the
Diphu pass in the east.
Some of the prominent tribes of Arunachal Himalayas from west to east are the
Monpa, Abor, Mishmi, Nyishi, and the Nagas.
Located in the northeast India, the Eastern Hills i.e. parts of the Himalayan
mountains are known by different local names. They are known as Patkai Bum,
Naga hills, the Manipur hills in the North, and Mizo or Lushai hills in the South.
Northern Plains
The northern plains are formed by the alluvial deposits brought by the rivers −
the Indus, the Ganga, and the Brahmaputra.
The northern plains are divided into three major zones − the Bhabar, the Tarai, and
the alluvial plains.
Bhabar is a narrow belt spread between 8-10 km parallel to the Shiwalik foothills at
the break-up of the slope where all the rivers coming through this way deposit
heavy materials of rocks and boulders and get disappeared.
The south of Tarai is a belt consisting of old and new alluvial deposits known as the
Bhangar and Khadar accordingly.
The alluvial plains are further divided as the Khadar and the Bhangar.
Peninsular Plateau
Delhi ridge in the northwest, (extension of Aravallis), the Rajmahal hills in the east,
Gir range in the west and the Cardamom hills in the south are the peripheral parts
of the Peninsular Block.
The Peninsular plateau can be further divided into three broad groups i.e. the
Deccan Plateau, the Central Highlands, and the Northeastern Plateau.
Western Ghats is known by different local names. They are known as Sahyadri in
Maharashtra; Nilgiri hills in Karnataka and Tamil Nadu; and Anaimalai hills, and
Located on the Anaimalai hills of the Western Ghats Anaimudi (2,695 m) is the
highest peak of Peninsular plateau, followed by Dodabetta (2,637 m) on the Nilgiri
hills.
Thal, Bhor, and the Pal Ghats are the important passes of the Western Ghats.
The Eastern Ghats stretch from the Mahanadi Valley in the north to the Nilgiris in
the south.
The Eastern Ghats are discontinuous and irregular and dissected by many rivers
draining into the Bay of Bengal.
The most distinct feature of the peninsular plateau is the black soil area known as
Deccan Trap.
Formed by a series of scarped plateaus on the south, the Satpura range is part of
the Central Highlands.
The general elevation of the Central Highlands ranges between 700 and 1,000 m
above the mean sea level.
Rajmahal hills and the Meghalaya plateau are the part of the Northeastern Plateau.
The Meghalaya plateau is further sub-divided as the Garo Hills; the Khasi Hills;
and the Jaintia Hills.
Indian Desert
The Great Indian Desert, also known as the Thar Desert, lies in the northwest of
the Aravalli hills.
The Aravali Hills lie on the western and north western margins of the peninsular
plateau. These are highly eroded hills and are found as broken hills between Gujarat
and Delhi.
Coastal Plains
The Indian coastal plains are divided as the western coastal plains and the eastern
coastal plains.
The western coast may be divided into the following divisions − the Kachchh and
Kathiawar coast in Gujarat; Konkan coast in Maharashtra; Goan coast in
Karnataka, and the Malabar coast in Kerala respectively.
The Malabar Coast has certain distinctive features such as Kayals (backwaters),
which are used for fishing, inland navigation, and these backwaters hold a special
attraction for the tourists.
In comparison to the western coastal plains, the eastern coastal plain is broader
and is an example of an Emergent coast.
The Eastern Coast is named as the Northern Circar (in the north part i.e. part of
West Bengal, Odisha, etc.) and the southern part is known as the Coromandel
Coast (part of Southern Andhra Pradesh and Tamil Nadu). The eastern coastal plain
is known as the Northern Circars in the region between Krishna and Mahanadi
rivers (West Bengal, Odisha, etc.) and as the Coromandel Coast in southern part
between Krishna and Kaveri rivers (Andhra Pradesh and Tamil Nadu).
Islands
There are two major island groups in India, i.e., one in the Bay of Bengal (Andaman
and Nicobar) and the other in the Arabian Sea (Lakshadweep).
The two principal groups of islets include the Ritchies archipelago and the
Labyrinth Islands.
However, the entire group of islands is divided into two broad categories − the
Andaman in the north and the Nicobar in the south and they are separated by Ten
Degree Channel.
Situated in the Nicobar Islands, Barren Island is the only active volcano in India.
Located on the North Andaman, Saddle peak (738 m) is the highest peak of the
region.
The flow of water through well-defined channels is known as drainage and the
network of such channels is known as drainage system.
The drainage pattern of an area is the result of the geological time period, nature,
and structure of rocks, topography, slope, etc.
About 77% of the drainage area consisting of the Ganga, the Brahmaputra, the
Mahanadi, the Krishna, etc. is oriented towards the Bay of Bengal.
On the other hand, 23% comprising the Indus, the Narmada, the Tapi, the Mahi,
and the Periyar systems discharge their waters in the Arabian Sea.
A river drain is a specific area, which is known as the catchment area of that river.
The boundary line separating one drainage basin from the other is called as the
watershed area.
Drainage Pattern
Dendritic
Radial
Centripetal
Trellis
A drainage pattern which looks like tree branches with lots of twigs is known as
Dendritic drainage pattern. For example, the rivers of northern plain.
Radial drainage patterns form when rivers originate from a hill and flow in all
directions. For example, the rivers originating from the Amarkantak.
Centripetal drainage pattern is formed when rivers discharge their waters from
all directions into a lake or a depression. For example, Loktak lake in Manipur.
Trellis drainage pattern is formed when the primary tributaries of main rivers
flow parallel to each other and secondary tributaries join them at right angles. For
example, rivers in the upper part of the Himalayan region.
Classification of Drainage
On the basis of the mode of origin, nature, and characteristics, the Indian drainage
is classified as −
Himalayan Drainage
Major Himalayan drainage systems are the Indus, the Ganga, and the
Brahmaputra rivers.
The Indus
The total length of the Indus River system is 2,880 km (in India 1,114 km).
The Indus, which is also known as the Sindhu, is the westernmost of the
Himalayan Rivers in India.
The Indus originates from a glacier near Bokhar Chu in the Tibetan region at an
altitude of 4,164 m in the Kailash Mountain range.
The Indus enters into Pakistan near Chillar in the Dardistan region.
Major tributaries of Indus are the Shyok, the Gilgit, the Zaskar, the Hunza, the
Nubra, the Shigar, the Gasting, and the Dras in the upper part.
In the lower part, the Satluj, the Beas, the Ravi, the Chenab, and the Jhelum are
the major tributaries of the Indus.
Finally, the Indus discharges into the Arabian Sea near Karachi in Pakistan.
The Jhelum, an important tributary of the Indus, rises from a spring at Verinag
situated at the foot of the Pir Panjal.
The Jhelum flows through Srinagar and the Wular Lake before entering into
Pakistan.
Formed by two streams i.e. the Chandra and the Bhaga, the Chenab is the largest
tributary of the Indus.
Originating from the Rohtang pass in the Kullu hills of Himachal Pradesh and flowing
through the Chamba valley of the state, Ravi is one of the important tributaries of
the Indus.
Originating from the Beas Kund near the Rohtang Pass at an elevation of 4,000 m
above the mean sea level, Beas is also an important tributaries of the Indus.
Beas enters into the Punjab plains and meets with the Satluj near Harike.
Also popular as Langchen Khambab (in Tibet), the Satluj originates from the
Rakas lake near Mansarovar at an altitude of 4,555 m in Tibet.
The Satluj passes through the Shipki La on the Himalayan ranges and enters into
the Punjab plains.
The Satluj is the river that feeds the canal system of the Bhakra Nangal project.
The Ganga
The Ganga originates from the Gangotri glacier near Gaumukh (3,900 m) in the
Uttarkashi district of Uttarakhand.
However, the river, when it originates from the Gangotri glacier is known as the
Bhagirathi.
At Devprayag, the Bhagirathi merges with another river, i.e., the Alaknanda; and
from here, it is known as the Ganga.
The major tributaries of the Alaknanda are the Dhauli and the Vishnu Ganga; these
two rivers meet at Joshimath/Vishnu Prayag.
Some other tributaries of the Alaknanda are the Pindar (joins at Karna Prayag), the
Mandakini or Kali Ganga (joins at Rudra Prayag).
The total length of the Ganga in India is 2,525 km, which is shared by Uttarakhand
(110 km); Uttar Pradesh (1,450 km); Bihar (445 km); and West Bengal (520
km).
The Son is a major right bank tributary of the Ganga; however, major left bank
tributaries are the Ramganga, the Gomati, the Ghaghara, the Gandak, the Kosi,
and the Mahananda.
Originating from the Yamunotri glacier on the western slopes of Banderpunch range
(6,316 km), the Yamuna is the longest tributary of the Ganga.
The Chambal, the Sind, the Betwa, and the Kenon are the right bank tributaries of
the Yamuna and the Hindan, the Rind, the Sengar, the Varuna, etc. are the left bank
tributaries.
The Chambal rises near Mhow in the Malwa plateau of Madhya Pradesh.
The Chambal is famous for its badland topography, known as the Chambal
ravines (as shown in the image given below).
Originating from the Nepal Himalayas between the Dhaulagiri and Mount Everest,
the Gandak consists of two streams, namely Kaligandak and Trishulganga.
The Ghaghara originates from the Mapchachungo glaciers and joins the Ganga at
Chhapra, Bihar.
The Kosi originates from the north of Mount Everest in Tibet where it is known as
the Arun.
Originating from the Garhwal hills near Gairsain, the Ramganga joins the Ganga
near Kannauj.
The Damodar drains the eastern margins of the Chottanagpur plateau, where it
flows through a rift valley and finally joins the Hugli.
The Sarda or Saryu River rises from the Milam glacier in the Nepal Himalayas where
it is known as the Goriganga. However, along the Indo-Nepal border, it is called as
Kali or Chauk, where it joins the Ghaghara.
Originating from the Darjeeling hills, the Mahananda joins the Ganga as its last left
bank tributary in West Bengal.
Originating from the Amarkantak plateau, the Son is a large south bank tributary of
the Ganga; it joins the Ganga at Arrah, Bihar.
The Brahmaputra
The Brahmaputra originates from the Chemayungdung glacier of the Kailash range
near the Mansarovar Lake.
In Tibet, the Brahmaputra is known as the Tsangpo (means the purifier).
The Rango Tsangpo is the major right bank tributary of the Brahmaputra in Tibet.
The Brahmaputra enters into India near the west of Sadiya town in Arunachal
Pradesh.
Major left bank tributaries of the Brahmaputra are Lohit, Dibang or Sikang, Burhi
Dihing, and Dhansari.
Major right bank tributaries of the Brahmaputra are the Subansiri, Kameng, Manas,
and Sankosh.
The Tista joins the Brahmaputra on its right bank in Bangladesh and from here, the
river is known as the Yamuna.
Finally, the Brahmaputra merges with the river Padma and falls in the Bay of
Bengal.
The Mahanadi originates from Sihawa in Raipur district of Chhattisgarh and runs
through Madhya Pradesh and Odisha and finally discharges its water into the Bay of
Bengal.
Popularly known as the Dakshin Ganga, the Godavari is the largest peninsular
river system.
The Godavari originates from Nasik district of Maharashtra and discharges its water
into the Bay of Bengal.
With total 1,465 km length, Godavari covers the areas of Maharashtra, Madhya
Pradesh, Chhattisgarh, Odisha, and Andhra Pradesh.
The Penganga, the Indravati, the Pranhita, and the Manjra are the major tributaries
of Godavari.
Originating from Mahabaleshwar in Sahyadri, the Krishna is the second largest east
flowing Peninsular River.
The Koyna, the Tungabhadra, and the Bhima are the major tributaries of the
Krishna.
Of the total catchment area of the Krishna, 27% lies in Maharashtra, 44% in
Karnataka, and 29% in Andhra Pradesh.
The Kaveri originates from the Brahmagiri hills (1,341m) located in Kogadu district
of Karnataka.
The river Kaveris total course of 770 km commands a basin area of 8.8 million
hectare mha, of which, 3% lies in Kerala, 41% lies in Karnataka, and 56% lies in
Tamil Nadu.
Major tributaries of the Kaveri are the Kabini, the Bhavani, and the Amravati.
The Narmada originates from the western flank of the Amarkantak plateau (1,057
m).
Flowing through a rift valley located between the Satpura in the south and the
Vindhya range in the north, the Narmada forms Dhuandhar waterfall and a
picturesque gorge of marble rocks nearby Jabalpur.
Flowing in the westward direction, Narmada finally empties into the Arabian Sea in
the Bharuch district of Gujarat.
Originating from Multai in the Betul district of Madhya Pradesh, Tapi is the other
important westward flowing river emptying into the Arabian Sea.
About 79% of the Tapi basin lies in Maharashtra, 15% in Madhya Pradesh, and the
remaining 6% in Gujarat.
Primarily, Luni originates in the Pushkar valley of the Aravalli range, Rajasthan in
two branches, i.e. the Saraswati and the Sabarmati; which join each other at
Govindgarh. From here, the river is known as Luni.
Luni finally debouches into the Arabian Sea nearby the Rann of Kachchh.
Some small rivers flowing towards the West are the Shetruniji, the Bhadra,
Dhadhar, Sabarmati, Mahi, Vaitarna, Kalinadi, Dedti, Sharavati, Mandovi, Juari,
Bharathapuzha, Periyar, etc.
Some small rivers flowing towards the East are Subarnarekha, Baitarni, Brahmani,
Penner, and Palar.
The following table illustrates the major differences between Himalayan and the Peninsular
River system −
Super imposed,
Type of Antecedent and consequent leading to rejuvenated resulting in
drainage dendritic pattern in plains. trellis, radial, and
rectangular patterns.
Weather is the temporary state of the atmosphere, while climate refers to the
average of the weather conditions over a longer period of time.
Weather changes quickly, may be within a day or week, but climate changes in
imperceptivity and may be noted after 50, 100 years, or even more.
The climate of India has distinct regional variations discernible by the pattern of
winds, temperature, and rainfall; further, also in the form of rhythm of seasons and
the degree of wetness or dryness.
Latitude
Altitude
Relief
Winter
During the winter, north of the Himalayas develops a high pressure center.
This high pressure center gives rise to the flow of air at the low level from the north
towards the Indian subcontinent (i.e. south of the mountain range).
All of Western and Central Asia remains under the influence of westerly winds
(known as Jet Stream) along the altitude of 9-13 km from west to east.
These winds blow across the Asian continent at the latitudes, north of the
Himalayas, roughly parallel to the Tibetan highlands.
However, Tibetan highlands act as a barrier in the path of these jet streams, as a
result of this, the jet streams get bifurcated into two branches.
One branch is located to the south of the Himalayas, while the second branch is
positioned to the north of Tibetan Plateau.
The western cyclonic disturbances, which enter the Indian subcontinent from the
west and the northwest during the winter months, originate over the
Mediterranean Sea and are brought into India by the westerly jet stream.
Summer
During the Summer, the wind circulation over the subcontinent undergoes a
complete reversal at both, the lower as well as at the upper levels.
By the middle of July, the low pressure belt nearer the surface [termed as Inter
Tropical Convergence Zone (ITCZ)] moves northwards, roughly parallel to the
Himalayas between $20^{\circ}N$ and $25^{\circ}N$ (as shown in the image
given below).
The ITCZ is a zone of low pressure, attracts inflow of winds from different
directions.
With the apparent northward movement of the Sun towards the Tropic of Cancer
in March, temperatures start rising in north India, which is the sign of advent of
Summer season.
April, May, and June are the months of summer in north India.
In the heart of the ITCZ in the northwest, the dry and hot winds known as Loo,
blow in the afternoon, and very often, they continue to well into midnight.
Towards the end of the summer, there are pre-monsoon showers, which are a
common phenomenon in Kerala and coastal areas of Karnataka. This phenomenon
is locally known as mango showers, as it helps in the early ripening of mangoes.
Monsoon
The maritime tropical air mass (mT) from the southern hemisphere crosses the
equator and rushes towards the low pressure area; in general, the southwesterly
direction.
This moist air current causing rainfall in India is popularly known as the southwest
monsoon.
Simultaneously, an easterly jet stream flows over the southern part of the
Peninsula in June with a maximum speed of 90 km per hour.
The easterly jet stream steers the tropical depressions into India and these
depressions play a significant role in determining the distribution of monsoon rainfall
over the Indian subcontinent.
The tracks of these depressions are the areas of the highest rainfall in India.
The easterly jet stream is held responsible for the burst of the monsoon in India.
The southwest monsoon sets first over the Kerala coast by $1^{st}$ of June and
then moves swiftly to reach Mumbai and Kolkata between $10^{th}$ and
$13^{th}$ June. Further, by mid-July, southwest monsoon engulfs the entire
subcontinent.
Southwest monsoon gets divided into two branches − the Arabian Sea, causing
rain in western coast of India and the Bay of Bengal branch, causing rain in
eastern coast to India.
However, the Peninsular region of India does not have any well-defined cold
weather season.
There is hardly any seasonal change in the distribution pattern of the temperature
in coastal areas because of the moderating influence of the sea and the proximity
to the equator.
Winter monsoons do not cause rainfall, as they move from land to the sea. Hence,
primarily, they have little humidity; and secondly, due to anticyclonic circulation on
land, the possibility of rainfall from them reduces.
However, in northwestern India, some weak temperate cyclones coming from the
Mediterranean Sea (with little moisture) cause rainfall in Punjab, Haryana, Delhi, and
western Uttar Pradesh.
On the other hand, during October and November, northeast monsoon while
crossing over the Bay of Bengal, picks up moisture and causes torrential rainfall
over the Tamil Nadu coast, southern Andhra Pradesh, southeast Karnataka, and
southeast Kerala.
Interesting Facts
The shower causing coffee flowers blossom in Kerala and nearby areas is known as
blossom shower.
Nor Westers are the dreaded evening thunderstorms in Bengal and Assam.
During the south-west monsoon, the period after having rains for a few days, if
rain fails to occur for one or more weeks, it is known as break in the monsoon.
The notorious nature of Nor Westers can be understood from the local
nomenclature of Kalbaisakhi, meaning a calamity of the month of Baisakh.
In Assam, Nor Westers are known as Bardoli Chheerha.
Hot, dry, and oppressing winds blowing in the Northern plains from Punjab to Bihar
are known as Loo.
Sudden onset of the moisture-laden winds associated with violent thunder and
lightning, is often termed as the break or burst of the monsoon.
Tamil Nadu coast remains dry during the monsoon season because it is situated
parallel to the Bay of Bengal branch of southwest monsoon.
The monsoon rainfall has a declining trend with increasing distance from the sea.
For example, Kolkata receives 119 cm, Patna 105 cm, Allahabad 76 cm, and Delhi
56 cm.
As the south-west monsoon passes over the ocean surface (Indian Ocean, Arabian
Sea, and Bay of Bengal) it picks up moisture and causes rainfall in India.
Windward side of Western Ghats receives heavy rainfall (more than 250 cm);
however, as the distance increases from the sea, the amount and intensity of
rainfall start decreasing.
The Bay of Bengal branch of monsoon advances towards the eastern part of India
and causes heavy rainfall. North-east India receives heavy rainfall during the
monsoon season.
Cherapunji and Mawsynram (two places of Meghalaya) are worlds wettest place.
Though there are great spatial variations in India; the average annual rainfall of
India is 125 cm.
The whole of India has a monsoon type of climate, but because of the regional
variations, there are various types of climate in India.
Tropical climates
Dry climates
Ice climates
However, the following map (shown below) illustrates the major climatic types of India as
classified by Koeppen.
Natural vegetation refers to a plant community that has been left undisturbed over
a long period of time.
Classification of Vegetation
Based on climatic conditions, forests are divided into categories. They are −
Montane forests
Tropical evergreen forests are found in the regions that receive annual precipitation
of over 200 cm and mean annual temperature above $22^{\circ}C$.
Tropical evergreen forests are found in the western slope of the Western Ghats,
hills of the northeastern region, and the Andaman and Nicobar Islands.
Major examples of evergreen forests are rosewood, mahogany, aini, ebony, etc.
Semi-evergreen Forests
Main species of semi-evergreen forests are white cedar, hillock, and kail.
Tropical Deciduous Forests are the most widespread forests of India and are
popularly as Monsoon Forests.
Tropical deciduous forests are found in the regions, which receive rainfall between
70 and 200 cm.
Tropical deciduous forests are further categorized as the Moist deciduous forests
and Dry deciduous forest.
The moist deciduous forests are found in the regions, which record rainfall between
100 and 200 cm.
The moist deciduous forests are found along the foothills of the Himalayas, eastern
slopes of the Western Ghats, and Odisha.
Teak, sal, shisham, hurra, mahua, amla, semul, kusum, and sandalwood etc. are
the main species of the moist deciduous forests.
Dry deciduous forests are found in the regions that receive precipitation between
70 and 100 cm.
As the dry season begins, the trees of deciduous forests shed their leaves
completely.
Tendu, palas, amaltas, bel, khair, axlewood, etc. are the major trees of dry
deciduous forests.
Tropical thorn forests are found in the areas, which receive rainfall less than 50 cm.
Tropical thorn forests are found in the areas of south west Punjab, Haryana,
Rajasthan, Gujarat, Madhya Pradesh, and Uttar Pradesh.
Babool, ber, and wild date palm, khair, neem, khejri, palas, etc. are the important
species of tropical thorn forests.
Mountain Forests
Mountain forests in India are normally classified into two types, i.e. the northern
mountain forests and the southern mountain forests.
In the higher hill ranges of northeastern India; for example, hilly areas of West
Bengal and Uttaranchal, evergreen broad leaf trees such as oak and chestnut are
predominant.
Chir, deodar, pine, etc. are the important species of temperate forests.
Between 3,000 and 4,000 m, Silver firs, junipers, pines, birch, and rhododendrons,
etc. are found.
However, at higher altitude, the tundra vegetation is found and major species are
mosses and lichens.
At a higher altitude, the southern mountain forests largely belong to the temperate
type, which are locally known as Sholas in the Nilgiris, Anaimalai, and Palani hills.
Some of the trees of economic significance include magnolia, laurel, cinchona, and
wattle.
Chilika Lake (in Odisha) and Keoladeo National Park (in Bharatpur, Rajasthan) are
protected as water-fowl habitats under the Convention of Wetlands of International
Importance (i.e. Ramsar Convention).
Mangrove grows along the coasts in the salt marshes, tidal creeks, mud flats, and
estuaries; and, it has a number of salt-tolerant species of plants.
In India, the mangrove forests spread over 6,740 sq. km, which is 7% of the
worlds mangrove forests
Mangroves are largely found in the Andaman and Nicobar Islands and the
Sunderbans of West Bengal.
According to the India State of Forest Report 2011, the actual forest cover in India
is 21.05%, of which, 12.29% are dense forests and 8.75% are open forests.
Andaman and Nicobar Islands have 86.93% forest area; on the other hand,
Lakshadweep has zero per cent forest area [details of forest cover (state-wise)
shown in the image given below].
With (about) 90 percent of forest cover, Mizoram has the highest percentage of
forest area in India.
Haryana, Punjab, Rajasthan, Uttar Pradesh, Bihar, and Gujarat have less than 10
percent area under forest cover.
As shown in the map given below, national forest is broadly categorized as Dense
Forest, Open Forest, Scrub, and Mangrove.
Currently, there are 102 National parks and 515 wildlife sanctuaries. These
collectively cover an area of 15.67 million hectares of India.
Out of a total of 593 districts, 188 districts have been identified as tribal districts.
The tribal districts account for about 59.61% of the total forest cover of India,
whereas the geographical area of 188 tribal districts constitutes only 33.63% of
the total geographical area of India.
Social Forestry
For the forest conservation and increase the forest area, the concept of Social
forestry has been introduced.
Social Forestry means the management and protection of forests and afforestation
on barren lands with the purpose of helping in the environmental, social, and rural
development.
Farm forestry is a term applied to the process under which the farmers grow trees
for commercial and non-commercial purposes on their farm lands.
With approximately 47,000 plant species, India ranks $4^{th}$ in Asia and
$10^{th}$ in the world (in terms of plant diversity).
India has about 15,000 species of flowering plants and contributes 6 percent to
worlds total flowering plants.
Wildlife Act
In 1972, a comprehensive Wildlife Act was enacted, which instructed the main legal
framework for conservation and protection of the wildlife in India.
In the amendment, punishments have been made more stringent and provisions
have also been made for the protection of specified plant species and conservation
of endangered species of wild animals.
Besides, some other special schemes such as Project Tiger (1973) and Project
Elephant (1992) have been launched to conserve these species and their habitats.
Biosphere Reserve
There are 18 Biosphere Reserves in India, out of which 9 Biosphere Reserves have
been recognized by the UNESCO on World Network of Biosphere Reserves.
There are about 2,000 species of birds in India that account to 13 percent of the
worlds total.
There are about 2,546 species of fish in India that account to 12 percent of the
worlds total.
India has about 5 to 8 percent of the worlds amphibians, reptiles, and mammals.
India is the only country in the whole world where both tigers and lions are found.
Tigers are found in the Sundarbans of West Bengal, and the forests of Madhya
Pradesh and Himalayan region.
About 1,300 plant species have been listed as endangered species in India;
however, 20 species are already extinct.
The above highlighted reserves have been included in the World Network of
Biosphere Reserves of UNESCO.
Nanda Devi in Uttarakhand, Sunderbans in the West Bengal, the Gulf of Mannar in
Tamil Nadu, the Nilgiris between the states of Tamil Nadu, Kerala, and Karnataka,
etc. have been included in the world network of Biosphere reserves.
The plant species grown naturally without any human aid and remains undisturbed
is known as virgin vegetation.
The virgin vegetation, which are purely originated and grown in India is known as
endemic or indigenous species but those which have come from outside India
are termed as exotic plants.
Flora simply refers to plant species and Fauna refers to animal species.
Soil is very important and a valuable resource for every human being.
Soil is the mixture of rock debris and organic materials, which develop on the
earths surface.
The major factors that determine soils characteristics are parent material, climate,
relief, vegetation, time, and some other life-forms.
Major constituents of the soil are mineral particles, humus, water, and air.
A soil horizon is a layer generally parallel to the soil crust, whose physical
characteristics differ from the layers above and beneath.
Soil Profile
Soil Horizon is classified into three categories − Horizon A, Horizon B, and Horizon
C; collectively known as Soil Profile (i.e. the arrangement of soil layers).
Horizon A is the topmost zone, where organic materials stored with the minerals,
nutrients, and water, necessary for the growth of the plants.
Horizon B is the transition zone between the horizon A and horizon C, and hence,
it contains matter derived from horizon A as well as from horizon C.
Horizon C is composed of loose parent material and hence, it is the layer of first
stage of the soil formation process and eventually forms the above discussed two
layers.
Classification of Soil
Soils were classified on the basis of their inherent characteristics and external
features including texture, color, slope of land, and moisture content in the soil.
On the basis of genesis, color, composition, and location, the soils of India have
been classified as −
Alluvial soils
Black soils
Laterite soils
Arid soils
Forest soils
Saline soils
Peaty soils.
Alluvial Soils
Alluvial soils are widespread in the northern plains and the river valleys and cover
about 40% of total area of India.
Alluvial soils are depositional soils, as transported and deposited by the rivers
streams.
In the Upper and Middle Ganga plain, two different types of alluvial soils are found
i.e. Khadar (it is the new alluvium and is deposited by floods annually) and
Bhangar (it is a system of older alluvium, deposited away from the flood plains).
The alluvial soils normally vary in nature from sandy, loamy, to clayey and its color
varies from light grey to ash grey.
Black Soils
Also popular as Regur Soil or the Black Cotton Soil, Black soil covers most of the
Deccan Plateau; for example, black soil is found in parts of Maharashtra, Madhya
Pradesh, Gujarat, Andhra Pradesh, and Tamil Nadu.
Black soil is usually clayey, deep, and impermeable; therefore, it can retain the
moisture for a very long time (very useful for the crops especially cotton).
Black soil is rich in lime, iron, magnesia, alumina, and also potash.
The color of the black soil varies from deep black to grey.
Red soil develops on crystalline igneous rocks in the areas of low rainfall, especially,
in the eastern and southern parts of the Deccan Plateau.
Red soil develops a reddish color because of a wide diffusion of iron in crystalline
and metamorphic rocks. On the other hand, it develops yellow color when it occurs
in a hydrated form.
The fine-grained red and yellow soils are usually fertile, whereas coarse-grained
soils found in dry upland areas have poor fertility.
The red and yellow soils normally have poor content of nitrogen, phosphorous and
humus.
Laterite Soils
The laterite soils develop in areas of high temperature and high rainfall.
The laterite soils are commonly found in Karnataka, Kerala, Tamil Nadu, Madhya
Pradesh, and the hilly areas of Odisha and Assam.
Laterite soils are the result of intense leaching due to tropical rains; because of rain,
lime and silica are leached away, and soils become rich in iron oxide and aluminum.
Laterite soils however are poor in organic matter, nitrogen, phosphate, and
calcium, but rich in iron oxide and potash.
Laterite soils are normally infertile; however, it is widely to make bricks (used in
building construction).
Normally sandy in structure and saline in nature, arid soils vary from red to brown
in color.
Arid Soils
Lower horizons of the arid soils are occupied by kankar layers because of the
increasing calcium content downwards.
Saline Soils
Saline soils contain a larger proportion of sodium, potassium, and magnesium, and
thus, they are infertile, and do not support vegetation.
Because of the dry climate and poor drainage system, saline soil contains more
salt.
Saline soils are normally found in arid and semi-arid regions, as well as in
waterlogged and swampy areas.
Deficient in nitrogen and calcium, saline soils are found in western Gujarat, deltas of
the eastern coast, and in Sunderban areas of West Bengal.
Forests Soils
Forest soils are usually formed in the forest areas where sufficient rainfall is
available.
Like other organism, soils are living systems, as they too develop and decay, get
degraded, and respond to proper treatment if administered in time.
Peaty Soils
In the areas of heavy rainfall and high humidity, large quantity of dead organic
matter accumulates and enrich humus and organic content that forms the peaty
soils.
Peaty soils are normally heavy and black in color and widely found in the northern
part of Bihar, southern part of Uttaranchal, and the coastal areas of West Bengal,
Odisha, and Tamil Nadu.
Decline in soil fertility because of any reason (either natural or human induced) is
known as soil degradation (example shown in the image given below).
There is difference between the actual forest area and the forest area defined by
the Government.
Categories of Land
Land under settlements (i.e. rural and urban), infrastructure (i.e. roads, canals,
industries, shops, etc.) are kept under the category of Non-Agricultural Land.
Barren hilly terrains, desert lands, ravines, etc. normally are not suitable for
cultivation, hence, they are known as Barren and Wastelands.
The land owned by the village panchayat comes under Common Property
Resources.
Any land, which is left fallow (uncultivated) for more than five years is categorized
as Culturable Wasteland.
The land, which is left without cultivation for one or less than one agricultural year
is known as Current Fallow.
The physical extent of the land on which crops are sown and harvested is known
as Net Sown Area.
Land use pattern changes with time and the nature of economic activities carried
out in that region.
When secondary and tertiary sectors grow much faster than primary sector, then
agricultural land changes into non-agricultural land.
Likewise, India has undergone major changes within the economy over the past
four or five decades, and it has influenced the land-use changes in the country.
Because of the changing structure of the Indian economy, the rate of increase of
non-agricultural land is very fast.
There are three distinct cropping seasons in the northern and interior parts of India,
namely kharif, rabi, and zaid.
Kharif (June- Rice, Cotton, Bajra, Maize, Jowar, Rice, Maize, Ragi, Jowar,
September) Toor Groundnut
Dryland farming is largely restricted to the regions having annual rainfall less than
75 cm. Major crops are ragi, bajra, moong, gram, and guar (fodder crops).
The regions, which have rainfall in excess of soil moisture requirement of plants
during the rainy season is known as wetland farming. Major crops are rice, jute,
and sugarcane.
India produces about 11% cereals of the world and ranks 3rd in production after
China and U.S.A.
Indian cereals are classified as fine grains (e.g. rice, wheat, etc.) and coarse grains
(e.g. jowar, bajra, maize, ragi, etc.).
Types of Farming
On the basis of main source of moisture for crops, the farming can be classified as
irrigated and rainfed.
On the basis of adequacy of soil moisture during cropping season, rainfed farming is
further classified as dryland and wetland farming.
Major Crops
In southern states and West Bengal, the climatic conditions facilitate the cultivation
of two or three crops of rice in an agricultural year.
In West Bengal farmers grow three crops of rice called aus, aman, and boro.
India contributes more than 20% to worlds rice production and ranks 2nd after
China.
About one-fourth of the total cropped area of India is under rice cultivation.
West Bengal, Punjab, and Uttar Pradesh are the leading rice producing states.
About 85% of total area under this crop is concentrated in north and central
regions of the country, i.e., the Indo-Gangetic Plain, Malwa Plateau, and the
Himalayan regions especially up to 2,700 m altitude.
About 14% of the total cropped area in the country is under wheat cultivation.
Uttar Pradesh, Punjab, Haryana, Rajasthan, and Madhya Pradesh are wheat
producing states.
The coarse cereals together occupy about 16.50% of total cropped area in the
country.
Maharashtra alone contributes to more than half of the total jowar production of
the country.
Maharashtra, Gujarat, Uttar Pradesh, Rajasthan, and Haryana are the leading
Bajra producer states.
Maize is a food as well as fodder crop grown under the semi-arid climatic
conditions and over inferior soils.
Pulses are the legume crops, which increase the natural fertility of soils through
nitrogen fixation.
With one-fifth of the total production of pulses in the world, India is a leading
producer.
Pulses occupy about 11% of the total cropped area in the country.
Gram covers only about 2.8% of the total cropped area in the country.
Groundnut, rapeseed and mustard, soyabean, and sunflower are the main oilseed
crops grown in India.
India produces about 18.8% of the total groundnut production in the world.
Gujarat, Tamil Nadu, Telangana, Andhra Pradesh, Karnataka, and Maharashtra are
the leading groundnut producer states in India.
Rapeseed and mustard comprise several oilseeds such as rai, sarson, toria, and
taramira.
Rapeseed and mustard oilseeds together occupy only 2.5% of total cropped area
in the country.
Rajasthan alone contributes to about one-third production (of oilseeds) while Uttar
Pradesh, Haryana, West Bengal, and Madhya Pradesh other leading producers.
India grows both the short staple (Indian) cotton as well as the long staple
(American) cotton called narma in north-western parts of the country.
India ranks $4^{th}$ in the world for production of cotton after China, U.S.A., and
Pakistan.
The major cotton growing areas in India are parts of Punjab, Haryana, and
northern Rajasthan in the north-west; Gujarat and Maharashtra in the west; and
plateaus of Andhra Pradesh, Karnataka, and Tamil Nadu in the south.
Maharashtra, Gujarat, Andhra Pradesh, Punjab, and Haryana are the leading cotton
producing states.
India produces about three-fifth of the total jute production of the world.
West Bengal contributes about three-fourth of the total production of jute in the
country.
Sugarcane occupies 2.4% of total cropped area in the country and contributes
about 23% to the worlds production of sugarcane.
Uttar Pradesh produces about two-fifth of sugarcane of the country; other leading
producers are Maharashtra, Karnataka, Tamil Nadu, Telangana, and Andhra
Pradesh.
Black tea leaves are fermented whereas green tea leaves are not fermented.
Tea is grown over the undulating topography of hilly areas and well drained soils in
humid and sub-humid tropics and sub-tropics.
In India, tea plantation started in 1840s in the Brahmaputra valley of Assam, which
still is a major tea growing area in the country.
With 28% of the worlds total production, India is a leading producer of tea.
India ranks third among tea exporting countries in the world after Sri Lanka and
China.
Assam accounts for about 53.2% of the total cropped area and contributes more
than half of total production of tea in the country; West Bengal, and Tamil Nadu are
the other leading tea producers.
India generally grows superior quality of coffee i.e. arabica, which is in great
demand in the International market
India produces only about 3.2% coffee of worlds total production and ranks 7th
after Brazil, Vietnam, Colombia, Indonesia, Ethiopia, and Mexico.
Coffee in India is cultivated in the highlands of the Western Ghats in the states of
Karnataka, Kerala, and Tamil Nadu.
Karnataka alone contributes more than two-third to the total production of coffee
in India.
New seed varieties of wheat (from Mexico) and rice (from Philippines) known as
high yielding varieties (HYVs) were introduced during mid-1960s in India (Green
Revolution).
Agricultural Problems
About 57% of the land is covered by crop cultivation in India; however, in the
world, the corresponding share is only about 12%.
On the other hand, the land-human ratio in the country is only 0.31 ha, which is
almost half of that of the world as a whole i.e. 0.59 ha.
Low productivity;
Non-metallic minerals.
Major examples of metallic minerals are iron ore, copper, gold, etc.
The minerals containing iron is known as ferrous and without iron is known as non-
ferrous (copper, bauxite, etc.).
Depending upon the origination, non-metallic minerals are either organic (such as
fossil fuels also known as mineral fuels, which are derived from the buried animal
and plant, e.g. such as coal and petroleum), or inorganic minerals, such as mica,
limestone, graphite, etc.
Distribution of Minerals
All minerals are exhaustible in nature, i.e., will exhaust after a certain time.
However, these minerals take long time to form, but they cannot be replenished
immediately at the time of need.
More than 97% of coal reserves occur in the valleys of Damodar, Sone, Mahanadi,
and Godavari rivers.
Some new petroleum reserves are also found in the Krishna-Godavari and Kaveri
basins (shown in the image given above).
Iron ore, coal, manganese, bauxite, and mica are the major minerals of the north-
eastern plateau region.
The south-western plateau region covers major parts of Karnataka, Goa, and
contiguous Tamil Nadu uplands and Kerala.
Major mineral resources of south-western plateau region are iron ore, manganese,
and limestone.
Kerala has deposits of monazite and thorium, and bauxite clay and Goa has
deposits of iron ore.
North-Western Region
The north-western region covers the areas of Aravalli in Rajasthan and parts of
Gujarat.
Major minerals of north-western regions are copper and zinc; other significant
minerals include sandstone, granite, and marble, along with Gypsum and Fullers
earth deposits.
The Himalayan belt is also an important mineral belt, as it has rich deposits of
copper, lead, zinc, cobalt, and tungsten.
Major Minerals
Following are the major minerals found in india −
Iron
About 95% of total reserves of iron ore is found in the States of Odisha,
Jharkhand, Chhattisgarh, Karnataka, Goa, Telangana, Andhra Pradesh, and Tamil
Nadu.
Sundergarh, Mayurbhanj, and Jhar are the major iron ore regions in Odisha and the
important mines are Gurumahisani, Sulaipet, Badampahar (Mayurbhaj), Kiruburu
(Kendujhar), and Bonai (Sundergarh).
Dalli and Rajhara in Durg district are the important mines of Chhattisgarh.
The districts of Chandrapur, Bhandara, and Ratnagiri are the iron regions in
Maharashtra.
Other iron ore regions in India are Karimnagar and Warangal district of Telangana,
Kurnool, Cuddapah, and Anantapur districts of Andhra Pradesh, and Salem and
Nilgiris districts of Tamil Nadu.
Manganese
Bonai, Kendujhar, Sundergarh, Gangpur, Koraput, Kalahandi, and Bolangir are the
major manganese regions in Odisha.
Nagpur, Bhandara, and Ratnagiri districts are the major regions of manganese in
Maharashtra.
Bauxite
Kalahandi, Sambalpur, Bolangir, and Koraput are the leading producers of bauxite in
Odisha.
Katni-Jabalpur area and Balaghat are the major regions of bauxite in Madhya
Pradesh.
Kolaba, Thane, Ratnagiri, Satara, Pune, and Kolhapur in Maharashtra are important
bauxite producers.
Copper
Mica
Jaipur to Bhilwara and areas around Udaipur are the major mica-bearing regions of
Rajasthan.
Fossil fuel or conventional sources of energy are found exhaustible in nature and
also not environmental friendly; on the other hand, the non-conventional sources
of energy such as solar energy, wind energy, geo-thermal energy, tidal energy, etc.
are renewable sources of energy and they are also environmental friendly (as they
do not pollute environment).
Coal
About 80% of the coal deposits in India is of bituminous type and is of non coking
grade.
The most important Gondwana coal fields of India are located in Damodar Valley
region.
Raniganj, Jharia, Bokaro, Giridih, and Karanpura are major coalfields of Jharkhand-
Bengal coal belt.
Other important coal mines are Singrauli (partially in Madhya Pradesh and partially
in Uttar Pradesh); Korba in Chhattisgarh; Talcher and Rampur in Odisha;
ChandaWardha, Kamptee, and Bander in Maharashtra; Singareni in Telangana; and
Pandur in Andhra Pradesh.
Tertiary coalfields are largely located in Darangiri, Cherrapunji, Mewlong, and Langrin
in Meghalaya; Makum, Jaipur, and Nazira in upper Assam; Namchik Namphuk in
Arunachal Pradesh; and Kalakot in Jammu and Kashmir.
The brown coal or lignite are found in the coastal areas of Tamil Nadu, Pondicherry,
Gujarat, and Jammu and Kashmir.
Petroleum
For the systematic oil exploration and production, the Oil and Natural Gas
Commission was set up in 1956.
Digboi, Naharkatiya, and Moran are important oil producing areas in Assam.
Ankaleshwar, Kalol, Mehsana, Nawagam, Kosamba, and Lunej are the major
petroleum producing regions in Gujarat.
Located 160 km off Mumbai, Mumbai high, an offshore oilfield was discovered in
1973. Production of petroleum at the field was started in 1976.
Krishna-Godavari and Kaveri basin on the east coast are significant regions of
petroleum production.
Oil extracted from the wells remains in crude oil form and contains many
impurities; hence, it needs to be extracted in oil refineries.
Based on destination, there are two types of oil refineries oil-field based (e.g.
Digboi) and market based (Barauni).
To transport and develop the market for natural gas, the Gas Authority of India
Limited was set up in 1984 (it is a public sector undertaking).
Though natural gas reserves have been located along the petroleum reserves, but
some exclusive natural gas reserves are found along the eastern coast of Tamil
Nadu, Odisha, and Andhra Pradesh; as well as around Tripura, Rajasthan, and off-
shore wells in Gujarat and Maharashtra.
Nuclear Energy
Essential minerals used for the generation of nuclear energy are uranium and
thorium.
Geographically, uranium ores are found at many different locations along the
Singbhum Copper belt.
Other important uranium reserve regions are also found in Udaipur, Alwar, and
Jhunjhunu districts of Rajasthan; Durg district of Chhattisgarh; Bhandara district of
Maharashtra; and Kullu district of Himachal Pradesh.
Thorium is mainly obtained from monazite and ilmenite, which is largely found
along the coast of Kerala and Tamil Nadu.
Palakkad and Kollam districts of Kerala have the worlds largest monazite deposits
(as shown in the image given above − larger view in insat image).
Atomic Energy Commission was established in 1948 and the Atomic Energy
Institute at Trombay was founded in 1954.
However, the Atomic Energy Institute at Trombay was renamed as Bhabha Atomic
Research Centre in 1967.
Solar Energy
Solar energy is 7% more effective than coal or oil based plants and 10% more
effective than nuclear plants.
The western part of India has greater potential for the development of solar
energy.
Ocean currents are the store-house of infinite energy. Hence, India has great
potential for the development of tidal energy.
Natural hot springs and geysers are being used since medieval period, but in the
present world, these could be potential sources of renewable energy.
Bio-energy is the energy derived usually from the biological products, such as
agricultural residues and other bio-waste.
Bio-energy can be converted into electrical energy, heat energy, and gas for
cooking.
Okhla in Delhi presents a good example by producing bio energy from municipal
waste.
On the basis of size, capital investment, and labor force employed, industries are
classified as large, medium, small scale, and cottage industries.
On the basis of ownership, industries come under public sector, private sector,
joint, and cooperative sector.
Industries of strategic and national importance are usually in the public sector.
Industries are also classified on the basis of the use of their products such as basic
goods industries, capital goods industries, intermediate goods industries, and
consumer goods industries.
On the basis of raw materials used by the industries − industries are categorized as
agriculture-based industries, forest-based industries, mineral-based industries, and
industrially processed raw material-based industries.
The major raw materials for the iron and steel industries are iron ore, coking coal,
limestone, dolomite, manganese, and fire clay.
The Rourkela Steel plant was set up in the year 1959 in the Sundargarh district
of Odisha in collaboration with Germany.
The Bhilai Steel Plant was established in 1959 with Russian collaboration in Durg
District of Chhattisgarh.
Bokaro steel plant was set up in 1964 at Bokaro with Russian collaboration.
Cotton Industry
India was famous worldwide for the production of muslin, a very fine variety of
cotton cloth, calicos, chintz, and other different varieties of fine cotton cloth.
At present, the major centers of the cotton textile industry are Ahmedabad,
Bhiwandi, Solapur, Kolhapur, Nagpur, Indore, and Ujjain.
Tamil Nadu has the largest number of mills; however, most of them produce yarn
rather than cloth.
Davangere, Hubballi, Ballari, Mysuru, and Bengaluru are important cotton growing
regions in Karnataka.
Sugar Industry
With more than one-third of the total production, Maharashtra has emerged as a
leading sugar producer in the country.
Uttar Pradesh is the second largest producer of sugar.
Petrochemical Industry
Many items are derived from crude petroleum, which provide raw materials for
many new industries; hence, these are collectively known as petrochemical
industries.
Three organizations, which are working in the petrochemical sector under the
administrative control of the Department of Chemicals and Petrochemicals are
−
Information Technology
The IT software and services industry account for almost 2% of Indias GDP.
Industrial Policy
The new industrial policy has three main dimensions − liberalization, privatization,
and globalization.
Within this new industrial policy, measures initiated are − abolition of industrial
licensing; free entry to foreign technology; foreign investment policy; access to
capital market; open trade; abolition of phased manufacturing program; and
liberalized industrial location program.
Globalization means integrating the economy of the country with the world
economy.
Industrial Regions
India has eight major industrial regions namely (as shown on the map given
below) −
Mumbai-Pune Region,
Hugli Region,
Gujarat Region,
Chhotanagpur Region,
Vishakhapatnam-Guntur Region,
Kollam-Thiruvananthapuram Region.
People use various methods to move goods, commodities, ideas from one place
to another.
Road
With a total length of about 42.3 lakh km, India has one of the largest road
networks in the world.
About 85% of passenger and 70% of freight traffic are carried by roads.
Sher Shah Suri built the Shahi (Royal) road to strengthen and consolidate his
empire from the Indus Valley to the Sonar Valley in Bengal.
This road was later renamed as the Grand Trunk (GT) Road during the British
period, connecting Calcutta and Peshawar.
Roads have been classified as National Highways (NH), State Highways (SH), Major
District Roads, and Rural Roads.
The main roads connecting two or more states are constructed and maintained by
the Central Government. These roads are known as the National Highways.
The National Highways constitute only 1.67 per cent of the total road length, but
carry about 40 per cent of the road traffic.
Golden Quadrilateral is 5,846 km long 4/6 lane, high density traffic corridor that
connects Indias four big metro cities : Delhi-Mumbai-Chennai-Kolkata.
With 3,640 km of road length, the East-West Corridor has been planned to
connect Silchar in Assam with the port town of Porbandar in Gujarat.
The State Highways join the state capitals with district headquarters and other
important towns.
All State Highways collectively constitute about 4 per cent of the total road length
in the country.
District roads are the roads connecting the District Headquarters and the other
important nodes in the district.
District roads account about 60.83 per cent of the total road length of the country.
Further, about 80 per cent of the total road length in India come under rural roads.
The Border Road Organization (BRO) was established in May 1960 for the
acceleration of economic development and strengthening defense preparedness
through rapid and coordinated improvement of strategically important roads along
the northern and north-eastern boundary of the country.
BRO has constructed roads in high altitude mountainous terrain joining Chandigarh
with Manali (Himachal Pradesh) and Leh (Ladakh), which runs at an average
altitude of 4,270 meters above the mean sea level.
The road density is only 12.14 km in Jammu and Kashmir, whereas in Kerala it is
517.77 km.
Railways
Railways was introduced to India in 1853, when a line was constructed from
Bombay to Thane covering a distance of 34 km.
The total length of Indian Railways network is 64460 km. (March 2011).
Indian Railways system has been divided into sixteen zones (as shown in the map
given below − the lines shown in different colors illustrate the regions of respective
zones).
India has three system of railways − broad gauge (the distance between rails is
1.676 meter); meter gauge (the distance between rails is one meter); and
narrow gauge (the distance between the rails is 0.762 meter or 0.610 meter).
Konkan Railway crosses 146 rivers, streams, nearly 2000 bridges, and 91 tunnels.
Asias largest tunnel which is about 6.5 km long, is constructed on the Konkan
railway route near Ratnagiri in Maharashtra.
Waterways
Water transport can be divided into two major categories − inland waterways
and oceanic waterways.
Besides, NW 4 covers specified stretches of rivers Godavari and Krishna along with
Kakinada Puducherry; the total distance is 1078 km.
NW 5 covers specified stretches of river Brahmani along with Matai river, delta
channels of Mahanadi and Brahmani rivers and East Coast canals; the total
distance is 588 km.
With 12 major and 185 minor ports, India has a vast coastline of approximate
7,517 km, including islands.
Roughly 95% of Indias foreign trade by volume and 70% by value moves through
ocean routes.
Airways
Air transport in India marked its beginning in 1911 with the commencement of
airmail over a little distance of 10 km between Allahabad and Naini.
The Airport Authority of India is accountable for providing safe, efficient air
traffic, and aeronautical communication services in the Indian Air Space.
Pawan Hans is the helicopter service operating in hilly areas and is widely used by
tourists in north-eastern regions.
Pipelin
Asias first cross country pipeline covering a distance of 1,157 km was constructed
by Oil India Limited (OIL) from Naharkatiya oilfield in Assam to Barauni
refinery in Bihar, which further extended up to Kanpur in 1966.
1256 km long pipeline between Salaya (Gujarat) and Mathura (U.P.) has been
constructed recently.
Radio
Radio broadcasting was started in India in 1923 by the Radio Club of Bombay.
Government took control over radio broadcasting in 1930 and established the
Indian Broadcasting System.
All India Radio was constituted in 1936 and it came to be known as Akashwani
from 1957.
Over a period of time, All India Radio started broadcasting a variety of programs
related to information, education, and entertainment.
Among all programs, news bulletins were also broadcasted at specific occasions
like the session of parliament and state legislatures.
Television
In 1976, TV was separated from All India Radio (AIR) and got a separate identity as
Doordarshan (DD).
Indian Satellites
With the advent of satellites, the Indian Communication System has revolutionized
the mode of communication.
On the basis of configuration and purposes, satellite system in India can be grouped
as −
The IRS satellite system became operational only after the launch of IRS-IA in
March 1988 from Vaikanour, Russia.
However, India has also developed its own Launch Vehicle PSLV (Polar Satellite
Launch Vehicle).
In 1950-51, Indias external trade was worth Rs.1, 214 crores, which rose to Rs.
22, 09,270 crores in 2009-10.
Though an increase has been registered in floricultural products, fresh fruits, marine
products, and sugar, there has been a great decline in the exports of traditional
items such as coffee, spices, tea, pulses, etc.
With the Green Revolution in 1970s, the import of food grains declined, but it was
replaced by fertilizers and petroleum.
Other major items of Indias import include pearls and semi-precious stones, gold
and silver, metalliferous ores and metal scrap, non-ferrous metals, electronic
goods, etc.
Trading Partners
The share of Asia and ASEAN in total trade (with India) is increased from 33.3 per
cent in 2000-01 to 57.3 per cent in the first half of 2011-12, while that of Europe
and America fell from 42.5 per cent to 30.8 per cent respectively.
The USA, which was in first position in 2003-04 has been relegated to third position
in 2010-11.
The UAE is becoming Indias largest trading partner, followed by China (2010-11).
Sea route is the major trading route for the Indian trade.
Sea-Ports
At present, India has 12 major ports and 185 minor or intermediate ports.
The 12 major ports handled about 71 per cent of the countrys oceanic traffic in
the year 2008-09.
The capacity of Indian ports increased from 20 million tons of cargo handling in
1951 to more than 586 million tons in 2008-09.
Kandla Port located in the Gulf of Kachchh, on the west coast of Gujarat has been
developed as a major port.
Mumbai has a natural harbor and it is the biggest seaport of the country.
Mumbai port is situated closer to the general routes from the countries of Middle
East, Mediterranean countries, North Africa, Europe, and North America where the
Marmagao Port, situated at the entrance of the Zuari estuary, is a natural harbor
port in Goa.
New Mangalore Port is located in the state of Karnataka; it caters to the export of
iron-ore and iron-concentrates along with fertilizers, petroleum products, edible
oils, coffee, tea, wood pulp, yarn, granite stone, molasses, etc.
Kochchi Port, situated at the head of Vembanad Kayal is a natural harbor port; it is
popularly known as the Queen of the Arabian Sea.
Kolkata Port is a riverine port located on the Hugli River; it is 128 km inland from
the Bay of Bengal.
Haldia Port handles bulk cargo like iron ore, coal, petroleum, petroleum products
and fertilizers, jute, jute products, cotton and cotton yarn, etc.
Paradip Port is situated on the Mahanadi delta, about 100 km from Cuttack,
Odisha.
Paradip Port has the deepest harbor especially suited to handle very large
vessels.
Chennai Port is one of the oldest ports on the eastern coast of India.
Airways have the advantage of taking the least time for carriage and handling high
value or perishable goods over long distances; however, it is expensive and hence
not suitable for the heavy and other machinery products.
Throughout the country, India has a highly uneven pattern of the population
distribution.
Uttar Pradesh has the highest population followed by Maharashtra, Bihar, and West
Bengal.
Terrain, climate, and availability of water largely determine the pattern of the
population distribution. However, socio-economic and historical factors also affect
the pattern of population distribution.
As per the 2011 census, urban population of India was 31.16% (the details of
major urban center is illustrated in the following map).
As per census 2011, the annual population growth rate is 1.64 percent.
Population Density
The density of population is expressed as the number of persons per unit area.
The density of population in India as per 2011 census is 382 persons per square
km.
Bihar with 1102 people per square km is the most densely populated state of India
followed by West Bengal (1029) and Uttar Pradesh (828).
Physiological density refers to the total population divided by the net cultivated
area.
Agricultural density refers to the total agricultural population divided by the net
cultivable area.
Agricultural population includes cultivators and agricultural laborers and their
family members.
Phase I, the period between 1901 and 1921 − This period is known as stagnancy
period, as the birth rate and death rate both were high and the population growth
rate was very slow.
Phase II, the period between 1921 and 1951 − It was the period of steady
population growth.
Phase III, the period between 1951 and 1981 − It was the period of population
explosion in India.
Phase IV, from 1981 to till date − Population growth rate though still high, but
reflecting a decreasing trend.
Population Composition
As per census 2011, 68.8 per cent of the total population lives in village and 31.2
per cent of the population lives in urban areas.
Considering the economic status, population can be divided into categories such as
main workers, marginal workers, and non-workers.
As per the census 2011, main workers and marginal workers collectively constitute
only about 39.8 percent of total population; rest are non-workers.
About 54.6 per cent of the total working population are cultivators and agricultural
laborers
About 41.6 % are other workers, such as non-household industries, trade,
commerce, construction, repair, and other services.
The proportion of workers in agricultural sector in India has shown a declining trend
over the last few decades; in 2001, it was 58.2%, whereas, in 2011, it was
54.6%.
Literacy
As per the 2011 census, literacy rate of India was 74.04% (the details of literacy
rate is illustrated in the following map − state-wise).
Sex Ratio
As per the 2011 census, sex ratio of India was 940 females per 1000 males (the
details of sex ratio is illustrated in the following map − state-wise).
Languages
Religions
Religion is one of the most integral parts of the population composition of India.
A cluster of dwellings of any type and size where human beings live is known as
human settlement.
On the basis of size and type, patterns of human settlement are studied; hence, a
settlement could be very small (e.g. hamlet) and could be very large (e.g.
metropolitan city).
The sparsely populated settlement whose main occupation is agricultural and other
primary sector activities, is known as village.
Patterns of Settlement
The pattern of human settlement is practically influenced by −
Cultural and ethnic factors (e.g. social structure, caste, and religion);
Security factors (e.g. defence against thefts, robberies, etc.).
Categories of Settlement
Clustered,
Agglomerated or nucleated,
Semi-clustered or fragmented,
Hamleted, and
Dispersed or isolated.
The settlement in which the houses are closely built up and compact is known as
clustered settlement. The shape of clustered settlement normally varies from
rectangular, radial, to linear.
Clustered settlement in India normally found in fertile alluvial plains and in the
northeastern states.
Some settlement is fragmented into several units and physically separated from
each other is known as hamleted settlement. Examples of hamleted settlement
can be seen in the middle and lower Ganga plain, Chhattisgarh and lower valleys of
the Himalayas.
The isolated settlement is known as dispersed settlement. Examples of such
settlement can be seen in parts of Meghalaya, Uttaranchal, Himachal Pradesh and
Kerala have this type of settlement.
Like rural settlement, urban settlements have also been developed during the
ancient period itself.
Ancient City
Medieval City
Modern City
Administrative City/Town
Industrial City
Transport City
Commercial City
Mining City
Cantonment City
Educational City
Religious City
Tourists City
Varanasi, Prayag (Allahabad), Pataliputra (Patna), Madurai, etc. are the examples of
ancient city.
Delhi, Hyderabad, Jaipur, Lucknow, Agra, Nagpur, etc. are the examples of medieval
city.
Surat, Daman, Panaji, Pondicherry, etc. are the examples of modern city.
Chandigarh, Bhubaneswar, Gandhinagar, Dispur, etc. are the cities developed after
the independence of India.
Ghaziabad, Rohtak, Gurgaon, etc. are the satellite towns that have been developed
around Delhi.
The towns/cities primarily engaged in export and import activities are known as
transport towns/cities. For example, Kandla, Kochchi, Kozhikode,
Vishakhapatnam, etc.
The towns/cities primarily engaged in trade and business are known as
commercial towns. For example, Kolkata, Saharanpur, Satna, etc.
The towns that developed because of the mining activities are known as mining
towns. For example, Raniganj, Jharia, Digboi, Ankaleshwar, Singrauli, etc.
The towns that developed as garrison towns are known as Garrison Cantonment
towns. For example, Ambala, Jalandhar, Mhow, Babina, Udhampur, etc.
The towns that developed because of the development of educational institutions
are known as educational towns. For example, Roorkee, Varanasi, Aligarh, Pilani,
Allahabad etc.
Some towns mark their development with the existence of religious shrines. Such
towns are known as religious towns. For example, Varanasi, Mathura, Amritsar,
Madurai, Puri, Ajmer, Pushkar, Tirupati, Kurukshetra, Haridwar, Ujjain, etc.
The towns that developed because of the influx of tourists are known as tourists
towns. For example, Nainital, Mussoorie, Shimla, Pachmarhi, Jodhpur, Jaisalmer,
Udagamandalam (Ooty), Mount Abu, etc.
Based on the population size, the census of India classifies urban centers into six
classes (see the table given below).
Class I
1
100,000 and above
Class II
2
50,000 to 99,999
Class III
3
20,000 to 49,999
Class IV
4
10,000 to 19,999
Class V
5
5,000 to 9,999
Class VI
6
less than 5000
The cities with population beyond five million are known as mega cities.
Urban agglomeration forms in a situation when a town and its adjoining urban
areas outgrowth, or two or more contiguous towns with or without their
outgrowth, or a city and one or more adjoining towns with their outgrowth
together forming a contiguous spread.
More than 60 per cent of urban population in India lives in Class I towns.
Out of total 423 cities, 35 cities/urban agglomerations are metropolitan cities and
six of them are mega cities.
During colonial period (i.e. British period) millions of the indentured laborers were
sent to Mauritius, Caribbean islands (Trinidad & Tobago and Guyana), Fiji, and
South Africa by British Government largely from the states of Uttar Pradesh and
Bihar.
All such migrations were covered under time-bound contracts known as Girmit
Act (Indian Emigration Act).
Migration Facts
The first major modification was done in 1961 Census, as two additional
components i.e. place of birth (village or town) and duration of residence (if
born elsewhere) were added.
Further, in 1971, another component added i.e. on place of last residence and
duration of stay at the place of enumeration.
In 1981, Information on reasons for migration were incorporated.
According to 2001 census, out of total 1,029 million population, 307 million (30
per cent) were reported as migrants in terms of place of birth.
Under the intra-state migration, numbers of female migrants are more than male
(marriage related migration).
As per the census 2001, India has recorded that more than 5 million persons have
migrated to India from other countries; largely, from the neighboring countries
including Bangladesh, Nepal, and Pakistan.
As per the census 2001, there are about 20 million people of Indian Diaspora,
spread across the 110 countries of the world.
In terms of in-migration, Maharashtra occupied the first place (2.3 million net in-
migrants), followed by Delhi, Gujarat, and Haryana.
On the other hand, in terms of out-migration, Uttar Pradesh (-2.6 million) and
Bihar (-1.7 million) were the top states.
In terms of the urban agglomeration (UA), Greater Mumbai had received the
maximum number of in-migrants.
Causes of Migration
Normally, the reason behind female migration throughout India is largely marriage
related; however, Meghalaya has a reverse scenario.
Remittances from the international migrants are one of the major sources of
foreign exchange.
For thousands of the poor villages of states like Bihar, Uttar Pradesh, Odisha,
Andhra Pradesh, Himachal Pradesh, etc. remittance acts as life blood for their
subsistence.
Impacts of Migration
India has centralized planning and the task of planning in India has been entrusted
to the Planning Commission of India.
Planning Commission of India is a statutory body headed by the Prime Minister and
has a Deputy Chairman and other members.
However, the Planning Commission of India is recently is now National Institution
for Transforming India or simply NITI Aayog.
The planning in the country is largely carried out through the array of Five Year
Plans.
At present, the Twelfth Five Year Plan is running, which was initiated in 2012 with a
focus on Faster, More Inclusive and Sustainable Growth.
Approaches of Planning
Sectoral planning
Regional planning.
Sectoral Planning
Regional Planning
Since all the regions of India have not developed on the same lines, therefore, to
reduce the regional imbalances, regional planning was introduced.
In order to reduce the regional and social disparities, the Planning Commission
introduced the target area and target group approaches to planning.
Some of the examples of target area planning directed towards the development
of target areas are −
The examples of target area planning are − the Small Farmers Development
Agency (SFDA) and Marginal Farmers Development Agency (MFDA).
Hill Area Development Programs were initiated during the Fifth Five Year Plan.
The plan covers 15 districts comprising all the hilly districts of Uttarakhand, Mikir Hill
and North Cachar hills of Assam, Darjeeling district of West Bengal and Nilgiri district
of Tamil Nadu.
Major aims of Hill Area Development Program were harnessing the indigenous
resources of the hilly areas through the development of horticulture, plantation
agriculture, animal husbandry, poultry, forestry, and small-scale and village industry.
Drought Prone Area Program was initiated during the Fourth Five-Year Plan
with the objectives of providing employment to the people in droughtprone areas
and creating productive assets.
The drought prone area in India largely covers semi-arid and arid tract of
Rajasthan; Gujarat; Western Madhya Pradesh; Marathwada region of
Maharashtra; Rayalseema and Telangana plateaus of Andhra Pradesh & Telangana;
Karnataka plateau; and highlands and interior parts of Tamil Nadu.
Planning Facts
In 1970s, the phrases such as redistribution with growth and growth and
equity were incorporated in the definition of development.
Over period of time, the meaning of Development did not remain restricted to
economic growth rather it also includes the issues such as improving the wellbeing
and living standard of the people; availing the health facilities; education; equality of
opportunity; and ensuring political and civil rights.
The concept of sustainable development emerged in the wake of general rise in the
awareness of environmental issues in the late 1960s in the Western World.
The publication of The Population Bomb by Ehrlich in 1968 and The Limits to
Growth by Meadows at al in 1972 further raised the environmental concerns.
The United Nations established a World Commission on Environment and
Development (WCED) headed by the Norwegian Prime Minister Gro Harlem
Brundtland. This is the reason that its report submitted in 1987 with the name
Our Common Future, is also known as Brundtland Report.
In this report, sustainable development is defined as − development that meets the
needs of the present without compromising the ability of future generations to
meet their own needs.
Indira Gandhi Canal, which previously was popular as the Rajasthan Canal, is one of
the largest canal systems in India.
The idea of Indira Gandhi Canal was proposed by Kanwar Sain in 1948; however,
the canal project was launched on 31 March, 1958.
The canal originates at Harike barrage in Punjab and runs parallel to Pakistan border
and covers an average distance of 40 km in Thar Desert of Rajasthan.
Disaster is an undesirable catastrophe resulting from the forces that are largely
beyond human control, strikes quickly with little or no warning, and causes or
threatens serious disruption of life and property. For example, earthquake,
tsunami, cyclone, flood, etc.
Disasters are normally caused by nature (beyond human control); however, there
are many human-induced disasters. For example, Bhopal Gas tragedy, Chernobyl
nuclear disaster, wars, release of CFCs (Chlorofluorocarbons), releasing
greenhouse gases, etc.
Besides, some disasters are natural in occurence, but those are indirectly caused
by human activities. For example, landslides in hilly regions, droughts, and floods
due to deforestation and other environmental damage.
On the other hand, Natural Hazards are the elements of circumstances in the
Natural environment that have the potential to harm people or property or both.
The disasters are global in nature; hence, to combat with it, the United Nations
made a systematic strategy at the World Conference on Disaster Management held
in May 1994 at Yokohama, Japan.
Atmospheric Disasters
Terrestrial Disasters
Aquatic Disasters
Biological Disasters
Aquatic disasters include flood, tidal waves, storm surge, tsunami, etc.
Biological disasters include fungal, bacterial, and viral diseases (e.g. bird flu,
dengue, etc.).
Disasters Zone
Very High Damage Earthquake Risk Zone in India include the north-eastern
regions, areas to the north of Darbhanga and Araria along the Indo-Nepal border in
High Damage Earthquake Risk Zone in India are parts of Jammu and Kashmir,
Himachal Pradesh, Northern parts of Punjab, Eastern parts of Haryana, Delhi,
Western Uttar Pradesh, and Northern Bihar.
Tsunamis can be observed frequently along the Pacific ring of fire, particularly
along the coast of Alaska, Japan, Philippines, and other islands of Southeast Asia,
Indonesia, Malaysia, Myanmar, Sri Lanka, and India etc.
The center of the cyclone is mostly a warm and low-pressure, cloudless core
known as eye of the storm (as shown in the image below) −
The ideal location of the tropical cyclone in India is Bay of Bengal.
Cyclones in the Bay of Bengal normally develop in the months of October and
November.
Assam, West Bengal, and Bihar are the high flood-prone states of India.
About 30 per cent of Indias total area comes under drought prone area, which
affects about 50 million people.
Western Ghats and Nilgiris; along with areas of frequent earthquakes, etc. are
categorized as Very High Landslide Vulnerability Zone.
Disaster Management
When soil moisture that is necessary to support the crops, is low or insufficient to
support crop cultivation, it is known as Agricultural Drought.
When the productivity of a natural ecosystem fails because of the shortage of
water and as a consequence of ecological distress, damages occur in the
ecosystem, it is known as Ecological Drought.
The word geography carries basically two Greek terms i.e. geo (meaning earth)
and graphos (meaning description), and the meaning of geography is description
of the earth.
Geography is an interdisciplinary subject as well as it is a discipline of spatial
synthesis.
Regional Approach.
On the other hand, the regional approach was also developed by a German
geographer namely Karl Ritter; he was a contemporary of Humboldt.
On the other hand, in the regional approach, first the world is divided into regions at
different hierarchical levels and then all the geographical phenomena in a particular
region are studied.
Because of the different approaches, geography is better known for its dualistic
characteristics.
Branches of Geography
Physical Geography
Human Geography
Regional Studies,
Regional Planning,
Regional Development, and
Regional Analysis.
Besides, there are some branches that study both the approaches. The branches
are Geographical Thought, (Philosophy) and Methods and Techniques.
Methods and Techniques include Cartography, Quantitative Techniques/Statistical
Techniques, Geo-informatics comprising techniques such as Remote Sensing, GIS,
GPS, etc.
There are dozens of hypotheses proposed regarding the origin of the earth by
different philosophers.
However, one of the hypotheses namely Nebular Hypothesis given by Immanuel
Kant and revised by Laplace became more popular.
Edwin Hubble was the first one who provided evidence that the universe is
expanding, in 1920.
It is believed that the event of Big Bang took place about 13.7 billion years from
now.
According to the Big Bang theory (as shown in the image given below), the
universe originated from an extremely dense and hot state and keeps expanding till
date.
Galaxy is a group of stars. Galaxies normally spread over vast distances, which
are measured in thousands of light-years.
A galaxy starts to form by the accumulation of hydrogen gas in the form of a very
large cloud called nebula.
One light year is the distance travelled by light in one year, which is equal to
$9.46110^{12}km$.
The mean distance between the sun and the earth is about 149,598,000 km. And,
in terms of light years, it is 8.311 minutes.
Milky Way
Our Solar system namely (part of Milky Way galaxy) consists of eight planets, the
sun, 63 moons, millions of smaller bodies like asteroids and comets and huge
quantity of dust-particles and gases.
The planets of Milky Way were formed about 4.6 billion years ago.
The planets, Mercury, Venus, Earth, and Mars are called the inner planets as they
lie between the sun and the belt of asteroids and the rest four planets i.e. Jupiter,
Saturn, Uranus, and Neptune are known as outer planets.
In addition to this, the inner planets are also known as Terrestrial Planets,
meaning earth-like as they are made up of rocks and metals, and have relatively
high densities.
On the other hand, the outer planets are known as Jovian (Jupiter like) or Gas
Giant Planets.
However, all the planets are formed in the same period i.e. about 4.6 billion years
ago.
The terrestrial planets were formed in the closer to the parent star where it was
too warm for gases to condense to solid particles, whereas Jovian planets were
formed at quite a distant location from the parent star.
The solar wind was most intense nearer to the sun; so, it blew off lots of gas and
dust from the terrestrial planets; however, the solar winds were not all that intense
to cause similar removal of gases from the Jovian planets.
The earth has a layered structure and hence, from the surface to deeper depths
(i.e. inner core), the earth has different zones/layers and each of these contains
materials of different characteristics.
The present composition of the earths atmosphere is chiefly contributed by
nitrogen and oxygen, as the primordial atmosphere with hydrogen and helium, is
supposed to have been stripped off as a result of the solar winds.
Degassing is the process through which the gases were outpoured from the
interior of the earth.
Further, continuous volcanic eruptions contributed water vapor and gases to the
atmosphere.
The earths oceans were formed within 500 million years from the evolution of the
earth.
About 3,800 million years ago, life began to evolve and the process of
photosynthesis got evolved about 2,500-3,000 million years ago.
The most widely used classification of climate is the climate classification scheme
propounded by V. Koeppen.
Koeppen broadly categorized five major climatic groups; four of them are based
on temperature and one on precipitation.
Letter
Group Type Characteristics
Code
Tropical
A-Tropical Humid Am Monsoonal, short dry season
monsoon
Climate
Tropical wet &
Aw Winter dry season
dry
Subtropical
BSh Low-latitude semi-arid or dry
steppe
Subtropical
BWh Low-latitude arid or dry
desert
B-Dry Climate
Mid-latitude
BSk Mid-latitude semi-arid or dry
steppe
Mid-latitude
BWk Mid-latitude arid or dry
desert
Climates
Mediterranean Cs Dry hot summer
Humid
Df No dry season, severe winter
D-Cold SnowForest continental
Climates
Subarctic Dw Winter dry and very severe
The following map shows the worlds climatic regions as classified by Koeppen −
Transport is a service or facility for the carriage of persons and goods from one
place to the other using humans, animals, and other means of transport.
Transportation normally occurs through land, water, and air.
Roadways
Road transport is more preferred especially for the short distance, as it provides
door-to-door service.
The worlds total motorable road length is measured about 15 million km, of which
North America accounts for 33%.
The highest road density and the highest number of vehicles are registered in North
America.
In North America, the highway density is about 0.65 km per sq km. So, every
place is not more than 20 km distance from a highway.
Railways
Probably, the first public railway line was opened in 1825 between Stockton and
Darlington in northern England.
Belgium has the highest density of 1 km of railway for every 6.5 sq. km area.
In Russia, railways account for about 90% of the countrys total transport with a
dense network west of the Urals.
Australia has about 40,000 km of railways, of which 25% are found in New South
Wales alone.
Transcontinental railways run across the continent and connect its two ends.
TransSiberian Railways is major rail route of Russia, which runs from St. Petersburg
in the west to Vladivostok on the Pacific Coast in the east.
Major cities that trans-Siberian railways connects are Moscow, Ufa, Novosibirsk,
Irkutsk, Chita, and Khabarovsk (as shown in the map given below).
Trans-Siberian railways is the most important route in Asia and the longest (i.e.
9,332 km) double-tracked and electrified transcontinental railway in the world.
Major cities that trans-Canadian railways connects are Montreal, Ottawa, Winnipeg,
and Calgary.
The Orient Express runs from Paris to Istanbul passing through the cities
Strasbourg, Munich, Vienna, Budapest, and Belgrade.
Waterways
The sea routes offer a smooth highway traversable in all directions with no
maintenance costs.
The Northern Atlantic Sea Route covers one fourth of the worlds foreign trade; so,
it is the busiest sea route in the world and popularly known as the Big Trunk
Route.
The Cape of Good Hope Sea Route connects West European and West African
countries with Brazil, Argentina, and Uruguay in South America.
Trade across the vast North Pacific Ocean moves by many routes, which converge
at Honolulu.
The Panama and Suez Canals are two vital man-made navigation canals.
Connecting the Mediterranean Sea and the Red Sea, the Suez Canal had been
constructed in 1869.
Chapters Categories
Suez Canal was constructed between Port Said in the north and Port Suez in the
south in Egypt (as shown in the map given below).
Suez Canal is about 160 km long and 11 to 15 m deep.
About 100 ships travel daily through Suez Canal and each ship takes 10-12 hours
to cross the canal.
Panama Canal connects the Atlantic Ocean in the east to the Pacific Ocean in the
west (as shown in the image given below).
Panama Canal was constructed across the Panama Isthmus between Panama City
and Colon by the U.S. government.
The reduction in distance because of the construction of Suez Canal and Panama
Canal is shown in the following map −
Rhine River flows through Germany and the Netherlands.
The Rhine is navigable for 700 km from Rotterdam, at its mouth in the Netherlands
to Basel in Switzerland.
The Great Lakes of North America i.e. Superior, Huron, Erie, and Ontario are
connected by Soo Canal and Welland Canal to form an inland waterway.
Pipelines are normally used extensively to transport liquids and gases such as
water, petroleum, and natural gas for an uninterrupted flow.
The first major breakthrough of the communication is the use of optic fiber cables
(OFC) as it allows large quantities of data to be transmitted rapidly, securely, and
are virtually error-free.
Today, Internet is the largest electronic network on the planet connecting more
than 1,000 million people in more than 100 countries of the world.
Indian satellite Aryabhatt was launched on April 19, 1979, Bhaskar-I in 1979, and
Rohini in 1980.
Currently, the majority of the internet users in the world are living in U.S.A., U.K.,
Germany, Japan, China, and India.
Cyberspace has been expanding the contemporary economic and social space of
humans through e-mail, e-commerce, e-learning and e-governance.
Roughly, 90 per cent of the world population lives in about 10 per cent of its land
area.
The 10 most populous countries of the world contribute about 60 per cent to the
worlds population.
Out of the top ten most populous countries, 6 are located in Asia.
China is the most populous country of the world followed by India, the USA,
Indonesia, Brazil, Pakistan, Bangladesh, Nigeria, Russian Federation, and Japan.
The ratio between the number of people to the size of land is known as the
density of population.
Availability of water
Landforms
Climate
Soils
Industrialization
Change in Population
The change in the number of inhabitants of a given territory during a specific period
of time; this change may be either positive or negative.
Births, deaths, and migration are the three components of population change.
The Crude Birth Rate (CBR) is expressed as number of live births in a year per
thousand of the population.
Crude Death Rate (CDR) is expressed in terms of deaths in a particular year per
thousand of population in a particular region.
Migration
When people move from one place to another, the place they move from is called
the Place of Origin and the place they move to is known as the Place of
Destination.
Population Growth
First time one billion population, world attains in 1830, the second billion population
after 100 years (i.e. in 1930), the third billion population after 30 years (i.e. in
1960), the fourth billion population after 15 years (i.e. in1975), the fifth billion
population after 12 years (i.e. in 1987), the sixth billion population after 12 years
(i.e. in 1999), and the seven billion population again after 12 years (i.e. in 2011).
Normally, developed countries take more time to increase their population than
developing countries.
Many of the African countries growth rate is much higher; annual population
growth rate even more than 4%.
On the other hand, many countries of the Eastern Europe including Russia, Latvia,
Estonia, Germany, Portugal, Italy, etc. have negative population growth rate.
The following map shows the population density of the world population −
Stage I
The first stage is the period of high fertility and high mortality, so most likely no
population change or very low population growth.
In the first stage, people are largely engaged in agriculture (primary sector).
Further, in the first stage, life expectancy used to be low and people are mostly
illiterate and have low levels of technology.
Stage II
In the second stage, initially, fertility remains high, but over the period of time, it
starts declining. On the other hand, mortality rate gets reduced because of the
improvements in sanitation and health condition; likewise, population growth rate
increases.
Stage III
In the last stage, both the fertility and the mortality decline considerably;
resultantly, the population is either stable or grows slowly (as shown in the graph
given above).
In the last or III stage, the population becomes urbanized, literate, and has high
technical knowhow and deliberately controls the family size.
In 1793, Thomas Malthus propounded a theory and stated that the number of
people would increase faster than the food supply.
Population Composition
The ratio between the number of women and men in the population is known as
the Sex Ratio.
The sex ratio is an important indicator about the status of women in a country.
Females have a biological advantage over males because they are more resilient
than males.
The world population illustrates a sex ratio of 102 males per 100 females.
With record 85 males per 100 females, Latvia has the highest sex ratio in the
world; on the other hand, in Qatar, there are 311 males per 100 females.
The sex ratio is favorable for females in (about) 139 countries of the world and
unfavorable in rest of the countries.
Asia has a low sex ratio. For example, countries like China, India, Saudi Arabia,
Pakistan, and Afghanistan have a lower sex ratio.
On the other hand, many parts of Europe have greater sex ratio; probably because
of better status of women in society and large number of males migrating to
different parts of the world (in the past).
The age group of 15-59 indicates a large number of working population; the most
productive age group.
The age-sex structure of a population refers to the number of females and males
in different age groups.
Population Pyramid
The following image illustrates the different shapes of pyramid that shows different
compositions −
The left side illustrates the percentage of males; on the other hand, the right side
shows the percentage of women in each age group.
In Western countries, males outnumber females in rural areas and females
outnumber the males in urban areas. On the other hand, the countries like Nepal,
Pakistan, and India have reverse case.
The process of people moving away from congested urban areas to cleaner areas
outside the city in search of a better quality of living is known as sub-
urbanization.
1991 census of India defines urban settlements as All places which have
municipality, corporation, cantonment board or notified town area committee and
have a minimum population of 5000 persons, at least 75 per cent of male workers
are engaged in non-agricultural pursuits and a density of population of at least 400
persons per square kilometers are urban.
Classification of Settlement
Major factors that shape the rural settlement are water supply, fertile lands, relief
features, building materials, etc.
On the basis of forms or shapes of the settlements, rural settlements are classified
as −
Linear,
Rectangular,
Circular,
Star like,
T-shaped village,
Y-shaped village,
Compact,
Disperse,
Planned, etc.
The settlement in which houses are constructed along a road, railway line, river,
canal edge of a valley, or along a levee is known as Linear Pattern.
The settlements in which houses are constructed in a rectangular shape is known
as Rectangular Pattern. Such kind of settlements is found in plain areas or/and in
wide inter-montane valley.
The settlements in which houses are constructed at the tri-junctions of the roads is
known as T-shaped Pattern. Such kind of settlements is found along the road,
which meets with another road at the dead end (the straight going road ends) and
bifurcates left and right (T-Shape).
The settlement in which houses are constructed along the straight going road,
which further bifurcates into two roads (similar to Y shape) is known as Y-Shape
pattern.
Major problems of rural settlements are the lack of basic amenities (such as toilet
facility, sanitation facility, health facilities, education facilities, etc.) and other
infrastructure such as rail, road, tele-communications, etc.
The first urban settlement that crossed one million mark was the city of London
(around AD 1810) and by the end of 1982, approximately 175 cities in the world
had crossed the one million population mark.
Depending upon the functionality of the urban settlement, towns are classified as −
Administrative Towns,
Commercial Towns,
Cultural Towns,
Industrial Towns.
The settlements that established for the administrative purpose or having largely
administrative function are known as administrative towns. For example, such as
Washington D.C., New Delhi, Canberra, Paris, Beijing, Addis Ababa, and London etc.
The settlements that facilitate commercial opportunities are known as trading and
commercial towns. For example, Agra, Lahore, Baghdad as an important
transport node; Manchester and St Louis in land centers; Winnipeg and Kansas City
as agricultural market towns; Frankfurt and Amsterdam as banking and financial
centers; etc.
Other Facts
The name Addis Ababa, capital of Ethiopia, indicates (as Addis means New and
Ababa means Flower) as a new city, which was established in 1878.
Canberra was planned as the capital of Australia in 1912 by an American landscape
architect, Walter Burley Griffin.
Depending on the size and the services available and functions rendered, urban
centers are categorized as town, city, million city, conurbation and megalopolis
(shown in the image given above).
Town is the smallest point in the hierarchy of urban settlements; its population is
comparatively greater than the village as well as its functionality is to serve as the
Cities are much larger than towns and have a greater number of economic
functions.
The cities tend to have transport terminals, major financial institutions, and regional
administrative offices.
The cities with a population of more than one million are known as million cities.
The term conurbation was coined by Patrick Geddes in 1915 for a large area of
urban development that resulted from the merging of two or more independent
towns or cities. For example, Greater London, Manchester, Chicago, and Tokyo.
Used by Jean Gottman in 1957, Megalopolis is a Greek word meaning great city.
Growth and development both call for a change over a period of time.
However, positive growth does not always lead to development, but rather
development occurs when there is a positive change in the quality.
For example, if the population of a city grows from fifty thousand to hundred
thousand over a period of time, we say the city has grown. However, along with
the population, if basic facilities like housing, provision of basic services, and other
characteristics also upgrade or improve, then this is known as the development.
Human Development
Further, the United Nations Development Program has adopted Dr. Haqs concept
of human development to publish the Human Development Report annually since
1990.
Leading a long and healthy life, being able to gain knowledge, and having enough
means to be able to live a decent life are the most important aspects of the human
development.
All environmental, financial, and human resources must be used keeping in mind the
future that misuse of any of these resources will lead to fewer opportunities for the
future generations.
The human development index illustrates what has been achieved in the key
areas of human development.
The Human Development index and the Human Poverty index are the two
important indices to measure human development used by the UNDP.
Bhutan is the only country in the world that officially proclaims the Gross National
Happiness (GNH) as the measure of its progress.
The following maps show countries with their HDI and GDP through respective
color (category) −
The countries that score more than 0.793, are kept under the category of very
high human development index (shown in above in the blue color).
The countries that score between 0.698 and 0.793, are kept under the category of
high human development index.
The countries that score between less than 0.522, are kept under the category of
low human development index.
Moreover, the political environment of the country and the level of freedom people
have is also an important criteria to major human development.
Trade simply means the voluntary exchange of goods and services, where two or
more parties are involved.
International trade is the exchange of goods and services among countries across
national borders.
Barter system was an initial form of trade practiced by the primitive societies.
In the barter system, goods were exchanged directly (no money were required).
Jon Beel Mela, which takes place in Jagiroad, 35 km away from Guwahati in the
month of January every year (after the harvest season) possibly, it is the only fair
in India, where barter system is still practiced.
The Silk Route is an early example of long distance trade connecting Rome to
China travelling about the 6,000 km route.
Fifteenth century onwards, the European colonialism began slave trade a new
form of trade of human beings.
The slave trade was pretty popular and a lucrative business for more than two
hundred years; however, over a period of time, it was abolished - first in Denmark
in 1792, and then Great Britain in 1807, and the United States in 1808.
During the World Wars I and II, countries practicing international trade imposed
trade taxes and quantitative restrictions.
However, after the war period, organizations like General Agreement for Tariffs
and Trade i.e. GATT (which later became the World Trade Organization i.e.
WTO), helped in reducing these tariffs imposed on trade of goods and services.
Population aspects,
Other Facts
The total value of goods and services traded in a given period of time is known as
the volume of trade.
The balance of trade is calculated by taking the difference of the goods and
services imported and exported by a country to other countries in a given period of
time (normally, in one financial year).
If the value of imports is greater than the value of a countrys exports, the country
has a negative or unfavorable balance of trade.
On the other hand, if the value of exports is greater than the value of imports, then
the country has a positive or favorable balance of trade.
Bilateral and Multilateral are the two major types of international trade.
Bilateral trade is practiced between two countries on their personal terms and
conditions.
Multilateral trade is practiced among many nations (one country can trade with
many countries); and, as per the WTO agreement, every WTO member country
has to follow the MFN Principle (Most Favored Nation).
The MFN principle restrains the discrimination trade rules and promotes a uniform
trading rule with every member country.
The act of opening up economies by removing trade barriers for trading purpose is
known as free trade or trade liberalization.
The practice of selling a commodity in two or more countries at a price that differs
for reasons not related to costs is called dumping.
Therefore, some countries also need to be cautious about dumped goods; because
along with free trade, dumped goods (of cheaper prices) can harm the domestic
producers.
After World War II (1948), some of the developed countries founded an
international organization namely General Agreement for Tariffs and Trade
(GATT).
However, from January 1, 1995, GATT was transformed into the World Trade
Organization (WTO).
WTO sets the rules for the global trading system and resolves disputes if any arises
between its member nations.
Besides, some Regional Trade Blocs have also formed in order to encourage
trade between countries who are located in geographical proximity, similarity, and
complementarities in trading items.
The major purpose of regional trade blocks is to curb restrictions on trade of the
developing world.
The ports provide facilities of docking, loading, unloading, and the storage facilities
for cargo.
The port specialized in bulk cargo-like grain, sugar, ore, oil, chemicals, and similar
materials is known as an industrial port.
The port that handles general cargo-packaged products and manufactured goods is
known as a commercial port.
The port, which is located away from the sea coast is known as an inland port.
For example, Manchester port, Kolkata port, Memphis port, etc.
The port, which is located away from the actual ports into the deep water is known
as an out port. For example, for example, Athens and its out port Piraeus in
Greece.
The port which is originally developed as calling point on main sea routes where
ships used to anchor for refueling, watering, and taking food items is known as a
port of call. For example, Aden, Honolulu, and Singapore.
The port, which is used as the collection center i.e. the goods are brought from
different centers (or countries) for export is known as an entrepot port. For
example, Rotterdam for Europe, and Copenhagen for the Baltic region.
The port that serves the warships and has repair workshops for them is known as
a naval port. For example, Kochi and Karwar in India.
The port that exclusively concerned with the transportation of passengers and mail
across water bodies (covering short distances) is known as a ferry port.
The following map illustrate the growing trends of trade through ships −
TOP TUTORIALS
Python Tutorial
Java Tutorial
C++ Tutorial
C Programming Tutorial
C# Tutorial
PHP Tutorial
R Tutorial
HTML Tutorial
CSS Tutorial
JavaScript Tutorial
SQL Tutorial
TRENDING TECHNOLOGIES
Kubernetes Tutorial
DSA Tutorial
Unix Tutorial
CERTIFICATIONS
DevOps Certification
Game Development Certification
Front-End Developer Certification
Online Go Compiler
Online C Compiler
Tutorials Point is a leading Ed Tech company striving to provide the best learning material on
technical and non-technical subjects.